The DOI matches its Crossref record; 112 of the 112 references it cites were found in a registry or an index.
The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review
Open accessAbstract
Wire arc additive manufacturing is currently rising as the main focus of research groups around the world. This is directly visible in the huge number of new papers published in recent years concerning a lot of different topics. This review is intended to give a proper summary of the international state of research in the area of wire arc additive manufacturing. The addressed topics in this review include but are not limited to materials (e.g., steels, aluminum, copper and titanium), the processes and methods of WAAM, process surveillance and the path planning and modeling of WAAM. The consolidation of the findings of various authors into a unified picture is a core aspect of this review. Furthermore, it intends to identify areas in which work is missing and how different topics can be synergetically combined. A critical evaluation of the presented research with a focus on commonly known mechanisms in welding research and without a focus on additive manufacturing will complete the review.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
A new finite element model for welding heat sources
Goldak, J., Chakravarti, A., & Bibby, M. (1984) · Metallurgical Transactions B · doi:10.1007/bf02667333 · Cited by 3,374
Ding, D., Pan, Z., Cuiuri, D., & Li, H. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7077-3 · Cited by 1,648
Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., & Norrish, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.001 · Cited by 1,577
Invited review article: Strategies and processes for high quality wire arc additive manufacturing
Cunningham, C. R., Flynn, J. M., Shokrani, A., Dhokia, V., & Newman, S. T. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.020 · Cited by 820
Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)
Rodrigues, T. A., Duarte, V., Miranda, R. M., Santos, T. G., & Oliveira, J. P. (2019) · Materials · doi:10.3390/ma12071121 · Cited by 779
Vafadar, A., Guzzomi, F., Rassau, A., & Hayward, K. (2021) · Applied Sciences · doi:10.3390/app11031213 · Cited by 748
Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
Wang, F., Williams, S., Colegrove, P., & Antonysamy, A. A. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1444-6 · Cited by 737
Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice
Oliveira, J. P., Santos, T. G., & Miranda, R. M. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100590 · Cited by 617
Jafari, D., Vaneker, T. H. J., & Gibson, I. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109471 · Cited by 605
Baufeld, B., der Biest, O. V., & Gault, R. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.11.032 · Cited by 601
A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)
Ding, D., Pan, Z. S., Cuiuri, D., & Li, H. (2014) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2014.08.008 · Cited by 577
Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2015) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1177/0954410014568797 · Cited by 489
A review on wire arc additive manufacturing: Monitoring, control and a framework of automated system
Xia, C., Pan, Z., Polden, J., Li, H., Xu, Y., Chen, S., & Zhang, Y. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.08.008 · Cited by 460
Bermingham, M. J., Kent, D., Zhan, H., StJohn, D. H., & Dargusch, M. S. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.03.035 · Cited by 411
Chen, X., Li, J., Cheng, X., He, B., Wang, H., & Huang, Z. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.05.024 · Cited by 401
Wire Arc Additive Manufacturing of Stainless Steels: A Review
Jin, W., Zhang, C., Jin, S., Tian, Y., Wellmann, D., & Liu, W. (2020) · Applied Sciences · doi:10.3390/app10051563 · Cited by 388
Testing and initial verification of the world's first metal 3D printed bridge
Gardner, L., Kyvelou, P., Herbert, G., & Buchanan, C. (2020) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2020.106233 · Cited by 340
Ding, D., Pan, Z. S., Cuiuri, D., et al. (2015) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.01.003 · Cited by 336
Microstructure of Interpass Rolled Wire + Arc Additive Manufacturing Ti-6Al-4V Components
Martina, F., Colegrove, P. A., Williams, S., & Meyer, J. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3172-1 · Cited by 328
Rodrigues, T. A., Duarte, V., Avila, J. A., Santos, T. G., Miranda, R. M., & Oliveira, J. P. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.029 · Cited by 328
Review on effect of heat input for wire arc additive manufacturing process
Rosli, N. A., Alkahari, M. R., Abdollah, M. F. B., Maidin, S., Ramli, F. R., & Herawan, S. G. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.02.002 · Cited by 322
Additive manufacturing using WAAM with AA5183 wire
Horgar, A., Fostervoll, H., Nyhus, B., et al. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.04.014 · Cited by 304
Bai, X., Colegrove, P. A., Ding, J., Zhou, X., Diao, C., Bridgeman, P., Hönnige, J., Zhang, H., & Williams, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.03.085 · Cited by 303
Yangfan, W., Xizhang, C., & Chuanchu, S. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.05.079 · Cited by 298
Ho, A., Zhao, H., Fellowes, J. W., Martina, F., Davis, A. E., & Prangnell, P. B. (2019) · Acta Materialia · doi:10.1016/j.actamat.2018.12.038 · Cited by 284
Wire arc additive manufacturing (WAAM): A new process to shape engineering materials
Singh, S. R., & Khanna, P. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.08.030 · Cited by 270
Xia, C., Pan, Z., Polden, J., Li, H., Xu, Y., & Chen, S. (2022) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01725-4 · Cited by 256
Hybrid metal additive manufacturing: A state–of–the-art review
Pragana, J. P. M., Sampaio, R. F. V., Bragança, I. M. F., Silva, C. M. A., & Martins, P. A. F. (2021) · Advances in Industrial and Manufacturing Engineering · doi:10.1016/j.aime.2021.100032 · Cited by 256
Rafieazad, M., Ghaffari, M., Nemani, A. V., & Nasiri, A. M. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04393-8 · Cited by 247
A computationally efficient finite element model of wire and arc additive manufacture
Ding, J., Colegrove, P. A., Mehnen, J., Williams, S., Wang, F., & Almeida, P. S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5261-x · Cited by 245
Shaped metal deposition of a nickel alloy for aero engine applications
Clark, D., Bache, M. R., & Whittaker, M. T. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.10.051 · Cited by 245
McAndrew, A. R., Alvarez Rosales, M., Colegrove, P. A., Hönnige, J. R., Ho, A., Fayolle, R., Eyitayo, K., Stan, I., Sukrongpang, P., Crochemore, A., et al. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.006 · Cited by 243
Residual stress of as-deposited and rolled wire+arc additive manufacturing Ti–6Al–4V components
Martina, F., Roy, M. J., Szost, B. A., Terzi, S., Colegrove, P. A., Williams, S., Withers, P. J., Meyer, J., & Hofmann, M. (2016) · Materials Science and Technology · doi:10.1080/02670836.2016.1142704 · Cited by 242
Bermingham, M. J., Nicastro, L., Kent, D., Chen, Y., & Dargusch, M. S. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.04.158 · Cited by 227
Chaturvedi, M., Scutelnicu, E., Rusu, C. C., Mistodie, L. R., Mihailescu, D., & Vendan, S. A. (2021) · Metals · doi:10.3390/met11060939 · Cited by 221
Zeng, Z., Cong, B. Q., Oliveira, J. P., Ke, W. C., Schell, N., Peng, B., Qi, Z. W., Ge, F. G., Zhang, W., & Ao, S. S. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101051 · Cited by 214
Ding, D., Shen, C., Pan, Z. S., Cuiuri, D., Li, H., Larkin, N., & van Duin, S. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2015.12.003 · Cited by 212
Arc Welding Processes for Additive Manufacturing: A Review
Pan, Z., Ding, D., Wu, B., Cuiuri, D., Li, H., & Norrish, J. (2018) · Transactions on Intelligent Welding Manufacturing · doi:10.1007/978-981-10-5355-9_1 · Cited by 205
Control of residual stress and distortion in aluminium wire + arc additive manufacture with rolling
Hönnige, J. R., Colegrove, P. A., Ganguly, S., Eimer, E., Kabra, S., & Williams, S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.015 · Cited by 203
Additive manufacturing method and different welding applications
Karayel, E., & Bozkurt, Y. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.08.039 · Cited by 203
Shen, Q., Kong, X., & Chen, X. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.10.037 · Cited by 201
Review of Wire Arc Additive Manufacturing for 3D Metal Printing
Li, J. Z., Alkahari, M. R., Rosli, N. A., Hasan, R., Sudin, M. N., & Ramli, F. R. (2019) · International Journal of Automation Technology · doi:10.20965/ijat.2019.p0346 · Cited by 197
Wire and arc additive manufacturing of metal components: a review of recent research developments
Liu, J., Xu, Y., Ge, Y., Hou, Z., & Chen, S. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05966-8 · Cited by 197
Shen, C., Pan, Z. S., Cuiuri, D., Roberts, J., & Li, H. (2015) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-015-0509-5 · Cited by 181
Wire and Arc Additive Manufacturing of Aluminum Components
Köhler, M., Fiebig, S., Hensel, J., & Dilger, K. (2019) · Metals · doi:10.3390/met9050608 · Cited by 175
Xiong, J., Yin, Z., & Zhang, W. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.02.021 · Cited by 170
Yildiz, A. S., Davut, K., Koç, B., & Yılmaz, O. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05482-9 · Cited by 166
Wire arc additive manufacturing of hot work tool steel with CMT process
Ali, Y., Henckell, P., Hildebrand, J., Reimann, J., Bergmann, J. P., & Barnikol-Oettler, S. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.01.034 · Cited by 163
Real-time control of microstructure in laser additive manufacturing
Farshidianfar, M. H., Khajepour, A., & Gerlich, A. P. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7423-5 · Cited by 159
Huang, H. R., Ma, N., Chen, J., Feng, Z., & Murakawa, H. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101248 · Cited by 153
Hosseini, V. A., Högström, M., Hurtig, K., Bermejo, M. A. V., Stridh, L.-E., & Karlsson, L. (2019) · Welding in the World · doi:10.1007/s40194-019-00735-y · Cited by 150
Müller, J., Grabowski, M., Müller, C., et al. (2019) · Metals · doi:10.3390/met9070725 · Cited by 148
Dávila, J. L., Neto, P. I., Noritomi, P. Y., Coelho, R. T., & da Silva, J. V. L. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-06062-7 · Cited by 144
Tanvir, A. N. M., Ahsan, M. R. U., Ji, C., Hawkins, W., Bates, B., & Kim, D. B. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03828-6 · Cited by 132
Zhang, X., Martina, F., Ding, J., Wang, X., & Williams, S. (2016) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/ffe.12547 · Cited by 131
Shaped metal deposition technique in additive manufacturing: A review
Yılmaz, O., & Ugla, A. A. (2016) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405416640181 · Cited by 128
Humping mechanisms present in high speed welding
Soderstrom, E. J., & Mendez, P. F. (2006) · Science and Technology of Welding & Joining · doi:10.1179/174329306x120787 · Cited by 127
Introduction to the design rules for Metal Big Area Additive Manufacturing
Greer, C. M., Nycz, A., Noakes, M., Richardson, B. S., Post, B., Kurfess, T. R., & Love, L. J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.02.016 · Cited by 125
Model predictive control of layer width in wire arc additive manufacturing
Xia, C., Pan, Z. S., Zhang, S., Polden, J., Wang, L., Li, H., Xu, Y., & Chen, S. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.07.060 · Cited by 125
Numerical simulation of WAAM process by a GMAW weld pool model
OGINO, Y., Asai, S., & Hirata, Y. (2018) · Welding in the World · doi:10.1007/s40194-018-0556-z · Cited by 124
Wang, J., Pan, Z. S., Yang, G., Han, J., Chen, X., & Li, H. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.02.029 · Cited by 122
Cold Metal Transfer (CMT) Based Wire and Arc Additive Manufacture (WAAM) System
Chen, X., Su, C., Wang, Y., Siddiquee, A. N., Konovalov, S. V., Jayalakshmi, S., & Singh, R. A. (2018) · Journal of Surface Investigation X-ray Synchrotron and Neutron Techniques · doi:10.1134/s102745101901004x · Cited by 122
Anisotropy of fatigue crack growth in wire arc additive manufactured Ti-6Al-4V
Xie, Y. G., Gao, M. X., Wang, F., Zhang, C., Hao, K., Wang, H., & Zeng, X. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.10.064 · Cited by 117
Gómez-Ortega, A., Galvan, L. C., Deschaux‐Beaume, F., Mezrag, B., & Rouquette, S. (2017) · Science and Technology of Welding & Joining · doi:10.1080/13621718.2017.1388995 · Cited by 114
Thermo-Mechanical Modelling of Wire-Arc Additive Manufacturing (WAAM) of Semi-Finished Products
Graf, M., Hälsig, A., Hoefer, K., Awiszus, B., & Mayr, P. (2018) · Metals · doi:10.3390/met8121009 · Cited by 111
Cadiou, S., Courtois, M., Carin, M., Berckmans, W., & Masson, P. L. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.119102 · Cited by 111
Nguyen, L., Buhl, J., & Bambach, M. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101265 · Cited by 108
Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision
Xiong, J., & Zhang, G. (2013) · Measurement Science and Technology · doi:10.1088/0957-0233/24/11/115103 · Cited by 104
Control of deposition height in WAAM using visual inspection of previous and current layers
Xiong, J., Zhang, Y., & Pi, Y. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01634-6 · Cited by 100
Benakis, M., Costanzo, D., & Patran, A. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.10.018 · Cited by 100
Silvestru, V. A., Ariza, I., Vienne, J., Michel, L., Sanchez, A. M. A., Angst, U., Rust, R., Gramazio, F., Köhler, M., & Taras, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109740 · Cited by 99
Xu, F., Dhokia, V. G., Colegrove, P. A., McAndrew, A. R., Williams, S., Henstridge, A., & Newman, S. T. (2018) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2018.1466395 · Cited by 97
Sridharan, N., Noakes, M., Nycz, A., Love, L. J., Dehoff, R., & Babu, S. S. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.11.101 · Cited by 95
Optimization of surface appearance for wire and arc additive manufacturing of Bainite steel
Fu, Y., Guilan, W., Haiou, Z., & Liang, L. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9621-1 · Cited by 94
Additive Manufacturing with Superduplex Stainless Steel Wire by CMT Process
Lervåg, M., Sørensen, C., Robertstad, A., Brønstad, B. M., Nyhus, B., Eriksson, M., Aune, R., Ren, X., Akselsen, O. M., & Bunaziv, I. (2020) · Metals · doi:10.3390/met10020272 · Cited by 94
Yang, Q., Xia, C., Deng, Y., Li, X., & Wang, H. (2019) · Materials · doi:10.3390/ma12162525 · Cited by 92
Physical mechanisms in hybrid additive manufacturing: A process design framework
Webster, S., Lin, H. Z., Carter, F. M., Ehmann, K. F., & Cao, J. (2021) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2021.117048 · Cited by 89
Marinelli, G., Martina, F., Ganguly, S., & Williams, S. (2019) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2019.05.009 · Cited by 88
Microstructure and mechanical properties of 304L steel fabricated by arc additive manufacturing
Ji, L., Lu, J., Liu, C., Jing, C., Fan, H., & Ma, S. (2017) · MATEC Web of Conferences · doi:10.1051/matecconf/201712803006 · Cited by 86
Hu, Z., Qin, X., Li, Y., Yuan, J., & Wu, Q. (2019) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-019-01501-z · Cited by 86
Javadi, Y., MacLeod, C., Pierce, G., Gachagan, A., Lines, D., Mineo, C., Ding, J., Williams, S., Vasilev, M., Mohseni, E., et al. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100806 · Cited by 84
Functionally graded structures of refractory metals by wire arc additive manufacturing
Marinelli, G., Martina, F., Lewtas, H., Hancock, D., Ganguly, S., & Williams, S. (2019) · Science and Technology of Welding & Joining · doi:10.1080/13621718.2019.1586162 · Cited by 81
Li, Y., Li, X., Zhang, G., Horváth, I., & Han, Q. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.009 · Cited by 81
Aldalur, E., Veiga, F., Suárez, A., Bilbao, J., & Lamíkiz, A. (2020) · Metals · doi:10.3390/met10070892 · Cited by 80
Cheepu, M., Lee, C. I., & Cho, S.-M. (2020) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-020-01915-x · Cited by 79
Yi, H.-J., Kim, J.-W., Kim, Y.-L., & Shin, S.-Y. (2020) · Metals and Materials International · doi:10.1007/s12540-019-00563-1 · Cited by 77
Correlation of Microstructure and Mechanical Properties of Metal Big Area Additive Manufacturing
Shassere, B., Nycz, A., Noakes, M., Masuo, C., & Sridharan, N. (2019) · Applied Sciences · doi:10.3390/app9040787 · Cited by 76
Marinelli, G., Martina, F., Ganguly, S., & Williams, S. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.101009 · Cited by 76
On the Post-Printing Heat Treatment of a Wire Arc Additively Manufactured ER70S Part
Nemani, A. V., Ghaffari, M., & Nasiri, A. M. (2020) · Materials · doi:10.3390/ma13122795 · Cited by 76
Jurić, I., Garašić, I., Bušić, M., & Kožuh, Z. (2018) · JOM · doi:10.1007/s11837-018-3151-2 · Cited by 67
Shen, C., Reid, M. H., Liss, K., Pan, Z. S., Ma, Y., Cuiuri, D., van Duin, S., & Li, H. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.06.025 · Cited by 64
Review on Quality Control Methods in Metal Additive Manufacturing
Lee, J., Park, H. J., Chai, S., Kim, G. R., Yong, H., Bae, S. J., & Kwon, D. (2021) · Applied Sciences · doi:10.3390/app11041966 · Cited by 62
Hot corrosion behaviour of wire-arc additive manufactured Ni-based superalloy ATI 718Plus®
Asala, G., Andersson, J., & Ojo, O. A. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.07.010 · Cited by 59
Li, R., Zhang, H., Dai, F., Huang, C., & Wang, G. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2019-0123 · Cited by 56
Wang, Y., Zhang, C., Lu, J., Bai, L., Zhao, Z., & Han, J. (2020) · IEEE Access · doi:10.1109/access.2020.2986130 · Cited by 54
Reisch, R. T., Hauser, T., Kamps, T., & Knoll, A. (2020) · Procedia Manufacturing · doi:10.1016/j.promfg.2020.10.103 · Cited by 52
Marinelli, G., Martina, F., Ganguly, S., & Williams, S. (2019) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2019.104974 · Cited by 48
Microstructural development during wire arc additive manufacturing of copper-based components
Baby, J., & Amirthalingam, M. (2020) · Welding in the World · doi:10.1007/s40194-019-00840-y · Cited by 48
Casuso, M., Veiga, F., Suárez, A., Bhujangrao, T., Aldalur, E., Artaza, T., Amondarain, J., & Lamíkiz, A. (2021) · Metals · doi:10.3390/met11050678 · Cited by 46
Mohebbi, M. S., Kühl, M., & Ploshikhin, V. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05647-6 · Cited by 44
Dimensional Metrology of Cell-matrix Interactions in 3D Microscale Fibrous Substrates
Tourlomousis, F., & Chang, R. C. (2017) · Procedia CIRP · doi:10.1016/j.procir.2017.04.009 · Cited by 43
Monotonic and Fatigue Properties of Steel Material Manufactured by Wire Arc Additive Manufacturing
Wächter, M., Leicher, M., Hupka, M., Leistner, C., Masendorf, L., Treutler, K., Kamper, S., Esderts, A., Wesling, V., & Hartmann, S. (2020) · Applied Sciences · doi:10.3390/app10155238 · Cited by 41
Self-citationWAAM process for metal block structure parts based on mixed heat input
Cui, J., Yuan, L., Commins, P., He, F., Wang, J., & Pan, Z. S. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06654-x · Cited by 41
A Comparative Study of the CMT+P Process on 316L Stainless Steel Additive Manufacturing
Xie, B., Xue, J., Ren, X., Wu, W., & Lin, Z. (2020) · Applied Sciences · doi:10.3390/app10093284 · Cited by 37
Effect of O2 content in argon-based shielding gas on arc wandering in WAAM of aluminum thin walls
da Silva, L. J., Scotti, F. M., Fernandes, D. B., Reis, R. P., & Scotti, A. (2021) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2021.01.018 · Cited by 36
A strut-based process planning method for wire arc additive manufacturing of lattice structures
Yu, Z., Ding, D., Pan, Z. S., Li, H., Lu, Q., & Fang, X. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.03.038 · Cited by 36
Process planning of automatic wire arc additive remanufacturing for hot forging die
Zhang, J., Zhou, J., Wang, Q., Xiao, G., & Quan, G.-Z. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05766-0 · Cited by 26
Fang, X., Ren, C., Zhang, L., Wang, C., Huang, K., & Lu, B. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2020-0051 · Cited by 26
Bähr, M., Buhl, J., Radow, G., Schmidt, J., Bambach, M., Breuß, M., & Fügenschuh, A. R. (2020) · Optimization and Engineering · doi:10.1007/s11081-020-09552-5 · Cited by 17
Wu, R., Yu, Z., Ding, D., Lu, Q., Pan, Z. S., & Li, H. (2021) · Materials · doi:10.3390/ma14061563 · Cited by 14
Cited by
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Metal additive manufacturing in structural engineering – review, advances, opportunities and outlook
Gardner, L. (2023) · Structures · doi:10.1016/j.istruc.2022.12.039 · Cited by 398
Wire arc additive manufacturing of low alloyed steels, copper aluminum alloys, and their bimetals
Karamimoghadam, M., Aghayar, Y., Forooghi, F., Denora, V., Mohammadi, M., Contuzzi, N., & Casalino, G. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-16436-4 · Cited by 18
“Recent research efforts have explored the application of WAAM in producing functionally graded materials (FGMs) and bimetals, where two dissimilar metals are combined to tailor material properties along the build direction [20–22].”
Metadata
- Authors
- Treutler, K., & Wesling, V.
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2021-09-16
- Volume
- 11
- Issue
- 18
- Pages
- 8619
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W3199498042
- Cited by
- 293
- References
- 112
- FWCI
- 14.47
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.