The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Three-Dimensional (3D) Printed Microneedles for Microencapsulated Cell Extrusion
Abstract
Cell-hydrogel based therapies offer great promise for wound healing. The specific aim of this study was to assess the viability of human hepatocellular carcinoma (HepG2) cells immobilized in atomized alginate capsules (3.5% (w/v) alginate, d = 225 µm ± 24.5 µm) post-extrusion through a three-dimensional (3D) printed methacrylate-based custom hollow microneedle assembly (circular array of 13 conical frusta) fabricated using stereolithography. With a jetting reliability of 80%, the solvent-sterilized device with a root mean square roughness of 158 nm at the extrusion nozzle tip (d = 325 μm) was operated at a flowrate of 12 mL/min. There was no significant difference between the viability of the sheared and control samples for extrusion times of 2 h (p = 0.14, α = 0.05) and 24 h (p = 0.5, α = 0.05) post-atomization. Factoring the increase in extrusion yield from 21.2% to 56.4% attributed to hydrogel bioerosion quantifiable by a loss in resilience from 5470 (J/m3) to 3250 (J/m3), there was no significant difference in percentage relative payload (p = 0.2628, α = 0.05) when extrusion occurred 24 h (12.2 ± 4.9%) when compared to 2 h (9.9 ± 2.8%) post-atomization. Results from this paper highlight the feasibility of encapsulated cell extrusion, specifically protection from shear, through a hollow microneedle assembly reported for the first time in literature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“It is used for the fabrication of tissue-mimicking and smart hydrogel inks and their non-invasive application in wound healing dressings [2,16,17,18,19,20].”
From 3D Printing of Thermoresponsive Hydrogel Laden with an Antimicrobial Agent towards Wound Healing Applications (2021) · cites this paper as [20]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bollenl, C. M. L., Lambrechts, P., & Quirynen, M. (1997) · Dental Materials · doi:10.1016/s0109-5641(97)80038-3 · Cited by 1,911
Athanasiou, K. A., Niederauer, G. G., & Agrawal, C. M. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85754-1 · Cited by 1,497
Vegas, A. J., Veiseh, O., Gürtler, M., Millman, J. R., Pagliuca, F. W., Bader, A. R., Doloff, J. C., Li, J., Chen, M., Olejnik, K., et al. (2016) · Nature Medicine · doi:10.1038/nm.4030 · Cited by 710
Zheng, X., Baker, H., Hancock, W. S., Fawaz, F., McCaman, M., & Pungor, E. (2006) · Biotechnology Progress · doi:10.1021/bp060121o · Cited by 346
Research works printed but not linked: 131
- Henry, 1998, Microfabricated Microneedles: A Novel Approach to Transdermal Drug Delivery, J. Pharm. Sci., 87, 922, 10.1021/js980042+ · DOI · Paper page
- Wang, 2016, Enhanced Cancer Immunotherapy by Microneedle Patch-Assisted Delivery of Anti-PD1 Antibody, Nano Lett., 16, 2334, 10.1021/acs.nanolett.5b05030 · DOI · Paper page
- Ye, Y., Wang, C., Zhang, X., Hu, Q., Zhang, Y., Liu, Q., Wen, D., and Milligan, J. (2017). A Melanin-mediated Cancer Immunotherapy Patch. Sci. Immunol., 2. · DOI · Paper page
- Hu, 2017, H2O2-Responsive Vesicles Integrated with Transcutaneous Patches for Glucose-Mediated Insulin Delivery, ACS Nano, 11, 613, 10.1021/acsnano.6b06892 · DOI · Paper page
- Lahiji, 2018, Exendin-4-encapsulated dissolving microneedle arrays for efficient treatment of type 2 diabetes, Sci. Rep., 8, 1170, 10.1038/s41598-018-19789-x · DOI
- Qiu, 2015, DNA-based Vaccination Against Hepatitis B Virus Using Dissolving Microneedle Arrays Adjuvanted by Cationic Liposomes and CpG ODN, Drug Deliv., 1, 1
- Esser, 2016, Tetanus Vaccination with a Dissolving Microneedle Patch Confers Protective Immune Responses in Pregnancy, J. Control. Release, 236, 47, 10.1016/j.jconrel.2016.06.026 · doi:10.1016/j.jconrel.2016.06.026
- Ryu, 2017, Efficacy of a Bleomycin Microneedle Patch for the Treatment of Warts, Drug Deliv. Transl. Res., 8, 273, 10.1007/s13346-017-0458-4 · doi:10.1007/s13346-017-0458-4
- Maaden, 2018, Hollow Microneedle-mediated Micro-injections of a Liposomal HPV E7 43–63 Synthetic Long Peptide Vaccine for Efficient Induction of Cytotoxic and T-helper Responses, J. Control. Release, 269, 347, 10.1016/j.jconrel.2017.11.035 · DOI
- Bhatnagar, 2018, Zein Microneedles for Localized Delivery of Chemotherapeutic Agents to Treat Breast Cancer: Drug Loading, Release Behavior, and Skin Permeation Studies, AAPS PharmSciTech, 19, 1818, 10.1208/s12249-018-1004-5 · DOI
- Ali, 2017, DNA Vaccination for Cervical Cancer: A Novel Technology Platform of RALA Mediated Gene Delivery via Polymeric Microneedles, Nanomed. Nanotechnol. Biol. Med., 13, 921, 10.1016/j.nano.2016.11.019 · DOI
- Mccrudden, 2017, Transdermal Delivery of Gentamicin using Dissolving Microneedle Arrays for Potential Treatment of Neonatal Sepsis, J. Control. Release, 265, 30, 10.1016/j.jconrel.2017.07.032 · DOI · Paper page
- Yan, 2017, Immunotherapeutic Effect of BCG-polysaccharide Nucleic Acid Powder on Mycobacterium Tuberculosis-infected Mice using Microneedle Patches, Drug Deliv., 24, 1648, 10.1080/10717544.2017.1391892 · doi:10.1080/10717544.2017.1391892
- Zhang, 2017, Locally Induced Adipose Tissue Browning by Microneedle Patch for Obesity Treatment, ACS Nano, 11, 9223, 10.1021/acsnano.7b04348 · DOI · Paper page
- Katsumi, H., Tanaka, Y., Hitomi, K., Liu, S., Quan, Y.-S., Kamiyama, F., Sakane, T., and Yamamoto, A. (2017). Efficient Transdermal Delivery of Alendronate, a Nitrogen-Containing Bisphosphonate, Using Tip-Loaded Self-Dissolving Microneedle Arrays for the Treatment of Osteoporosis. Pharmaceutics, 9. · doi:10.3390/pharmaceutics9030029
- Tas, 2017, Dihydroergotamine Mesylate-loaded Dissolving Microneedle Patch Made of Polyvinylpyrrolidone for Management of Acute Migraine Therapy, J. Control. Release, 268, 159, 10.1016/j.jconrel.2017.10.021 · DOI
- Gurtner, 2008, Wound Repair and Regeneration, Nature, 453, 314, 10.1038/nature07039 · DOI · Paper page
- Park, 2014, Wound healing potential of antibacterial microneedles loaded with green tea extracts, Mater. Sci. Eng. C Mater. Biol. Appl., 42, 757, 10.1016/j.msec.2014.06.021 · doi:10.1016/j.msec.2014.06.021
- Kearney, 2015, Methylene blue-loaded dissolving microneedles: Potential use in photodynamic antimicrobial chemotherapy of infected wounds, Pharmaceutics, 7, 397, 10.3390/pharmaceutics7040397 · doi:10.3390/pharmaceutics7040397
- Saghazadeh, 2018, Drug delivery systems and materials for wound healing applications, Adv. Drug Deliv. Rev., 127, 138, 10.1016/j.addr.2018.04.008 · DOI · Paper page
- Takada, 2013, Usefulness of basic fibroblast growth factor (bFGF) loaded dissolving microneedles for local therapy of skin wounds, J. Biomater. Nanobiotechnol., 4, 256, 10.4236/jbnb.2013.43032 · doi:10.4236/jbnb.2013.43032
- Liebl, 2012, Skin Cell Proliferation Stimulated by Microneedles, J. Am. Coll. Clin. Wound Spec., 4, 2
- Yeo, 2017, Microneedle physical contact as a therapeutic for abnormal scars, Eur. J. Med. Res., 22, 28, 10.1186/s40001-017-0269-6 · DOI
- Omolu, 2017, Assessment of solid microneedle rollers to enhance transmembrane delivery of doxycycline and inhibition of MMP activity, Drug Deliv., 24, 942, 10.1080/10717544.2017.1337826 · DOI
- Yang, 2013, A bio-inspired swellable microneedle adhesive for mechanical interlocking with tissue, Nat. Commun., 4, 1702, 10.1038/ncomms2715 · DOI · Paper page
- Rajabi, M., Roxhed, N., Shafagh, R.Z., Haraldson, T., Fischer, A.C., Wijngaart, W.V.D., Stemme, G., and Niklaus, F. (2016). Flexible and Stretchable Microneedle Patches with Integrated Rigid Stainless Steel Microneedles for Transdermal Biointerfacing. PLoS ONE, 11. · DOI
- Mukerjee, E.V., Isseroff, R.R., Nuccitelli, R., Collins, S.D., and Smith, R.L. (September, January 30). Microneedle Array for Measuring Wound Generated Electric Fields. Proceedings of the 2006 International Conference of the IEEE Engineering in Medicine and Biology Society, New York, NY, USA. · doi:10.1109/iembs.2006.260205
- Norman, 2012, Hollow Microneedles for Intradermal Injection Fabricated by Sacrificial Micromolding and Selective Electrodeposition, Biomed. Microdevices, 15, 203, 10.1007/s10544-012-9717-9 · DOI
- Dardano, 2015, A Photolithographic Approach to Polymeric Microneedles Array Fabrication, Materials, 8, 8661, 10.3390/ma8125484 · doi:10.3390/ma8125484
- Choi, 2013, Nanostructured Lipid Carrier-loaded Hyaluronic Acid Microneedles for Controlled Dermal Delivery of a Lipophilic Molecule, Int. J. Nanomed., 1, 289, 10.2147/IJN.S54529 · DOI
- Wang, 2016, Microneedles with Controlled Bubble Sizes and Drug Distributions for Efficient Transdermal Drug Delivery, Sci. Rep., 6, 28755
- Kim, 2018, A Repeatable and Scalable Fabrication Method for Hollow Silicon Microneedles, J. Micromech. Microeng., 28, 035007, 10.1088/1361-6439/aaa6a8 · DOI
- Ceyssens, 2013, Fabrication Process for Tall, Sharp, Hollow, High Aspect Ratio Polymer Microneedles on a Platform, J. Micromech. Microeng., 23, 075023, 10.1088/0960-1317/23/7/075023 · doi:10.1088/0960-1317/23/7/075023
- Ruggiero, 2018, Electro-drawn Polymer Microneedle Arrays with Controlled Shape and Dimension, Sens. Actuators B Chem., 255, 1553, 10.1016/j.snb.2017.08.165 · DOI
- Johnson, A.R., Caudill, C.L., Tumbleston, J.R., Bloomquist, C.J., Moga, K.A., Ermoshkin, A., Shirvanyants, D., Mecham, S.J., Luft, J.C., and DeSimone, M.J. (2016). Single-Step Fabrication of Computationally Designed Microneedles by Continuous Liquid Interface Production. PLoS ONE, 11. · DOI · Paper page
- Huh, 2018, Effects of Two Droplet-based Dissolving Microneedle Manufacturing Methods on the Activity of Encapsulated Epidermal Growth Factor and Ascorbic Acid, Eur. J. Pharm. Sci., 114, 285, 10.1016/j.ejps.2017.12.025 · doi:10.1016/j.ejps.2017.12.025
- Kim, M., Yang, H., Kim, S., Lee, C., and Jung, H. (2015). The Troy Microneedle: A Rapidly Separating, Dissolving Microneedle Formed by Cyclic Contact and Drying on the Pillar (CCDP). PLoS ONE, 10. · doi:10.1371/journal.pone.0136513
- Luzuriaga, 2018, Biodegradable 3D Printed Polymer Microneedles for Transdermal Drug Delivery, Lab Chip, 18, 1223, 10.1039/C8LC00098K · DOI · Paper page
- Vinayakumar, 2016, A Hollow Stainless Steel Microneedle Array to Deliver Insulin to a Diabetic Rat, J. Micromech. Microeng., 26, 065013, 10.1088/0960-1317/26/6/065013 · DOI
- Mansoor, 2013, Arrays of Hollow Out-of-Plane Microneedles Made by Metal Electrodeposition onto Solvent Cast Conductive Polymer Structures, J. Micromech. Microeng., 23, 085011, 10.1088/0960-1317/23/8/085011 · DOI
- Ovsianikov, 2007, Two Photon Polymerization of Polymer? Ceramic Hybrid Materials for Transdermal Drug Delivery, Int. J. Appl. Ceram. Technol., 4, 22, 10.1111/j.1744-7402.2007.02115.x · DOI · Paper page
- Boehm, R.D., Jaipan, P., Yang, K.-H., Stewart, T.N., and Narayan, R.J. (2016). Microstereolithography-fabricated Microneedles for Fluid Sampling of Histamine-contaminated Tuna. Int. J. Bioprinting, 2. · doi:10.18063/ijb.2016.01.010
- Lim, 2017, Three-dimensional Printing of a Microneedle Array on Personalized Curved Surfaces for Dual-pronged Treatment of Trigger Finger, Biofabrication, 9, 015010, 10.1088/1758-5090/9/1/015010 · DOI
- Nordon, 2017, High Fidelity Replication of Thermoplastic Microneedles with Open Microfluidic Channels, Microsyst. Nanoeng., 3, 17034, 10.1038/micronano.2017.34 · doi:10.1038/micronano.2017.34
- Macdonald, 2016, Assessment of Biocompatibility of 3D Printed Photopolymers Using Zebrafish Embryo Toxicity Assays, Lab Chip, 16, 291, 10.1039/C5LC01374G · DOI · Paper page
- Oskui, 2015, Assessing and Reducing the Toxicity of 3D-Printed Parts, Environ. Sci. Technol. Lett., 3, 1, 10.1021/acs.estlett.5b00249 · DOI · Paper page
- Carve, M., and Wlodkowic, D. (2018). 3D-Printed Chips: Compatibility of Additive Manufacturing Photopolymeric Substrata with Biological Applications. Micromachines, 9. · DOI
- Kang, 2012, Protein Encapsulation in Polymeric Microneedles by Photolithography, Int. J. Nanomed., 1, 3143, 10.2147/IJN.S32000 · doi:10.2147/ijn.s32000
- Lu, 2015, Microstereolithography and Characterization of Poly(propylene fumarate)-based Drug-loaded Microneedle Arrays, Biofabrication, 7, 045001, 10.1088/1758-5090/7/4/045001 · DOI
- Gieseke, M., Senz, V., Vehse, M., Fiedler, S., Irsig, R., Hustedt, M., Sternberg, K., Nölke, C., Kaierle, S., and Wesling, V. (2012). Additive Manufacturing of Drug Delivery Systems. Biomed. Eng. Biomed. Tech., 57. · doi:10.1515/bmt-2012-4109
- Miller, 2011, Integrated Carbon Fiber Electrodes within Hollow Polymer Microneedles for Transdermal Electrochemical Sensing, Biomicrofluidics, 5, 013415, 10.1063/1.3569945 · DOI
- Lacan, F., Coulman, S.A., Hotston, A., Petkov, P., and Birchall, J.C. (2013, January 8–10). Prototyping Parts with Micro Scale Features Using Additive Manufacturing: Using Microneedles as a Case Study. Proceedings of the 10th International Conference on Multi-Material Micro Manufacture, San Sebastián, Spain. · doi:10.3850/978-981-07-7247-5-346
- Pere, 2018, 3D Printed Microneedles for Insulin Skin Delivery, Int. J. Pharm., 544, 425, 10.1016/j.ijpharm.2018.03.031 · DOI · Paper page
- Liu, T.-L., Zahedi, S., Garling, R.J., Kralickk, F., Harris, C.A., and Cheng, M.M.-C. (2017, January 22–26). Prosthetic Arachnoid Granulations using 3D Printing Technology. Proceedings of the IEEE 30th International Conference on Micro Electro Mechanical Systems (MEMS), Las Vegas, NV, USA. · doi:10.1109/memsys.2017.7863463
- Nagamine, 2017, An Array of Porous Microneedles for Transdermal Monitoring of Intercellular Swelling, Biomed. Microdevices, 19, 68, 10.1007/s10544-017-0207-y · doi:10.1007/s10544-017-0207-y
- Lee, 2018, A Three-dimensional and Bevel-angled Ultra high Aspect Ratio Microneedle for Minimally Invasive and Painless Blood Sampling, Sens. Actuators B Chem., 255, 384, 10.1016/j.snb.2017.08.030 · DOI
- Wang, 2011, Hypodermic Needle-like Hollow Polymer Microneedle Array using UV Lithography into Micromolds, J. Microelectromech. Syst., 23, 991, 10.1109/JMEMS.2014.2307320 · DOI
- Lau, 2017, Multilayered Pyramidal Dissolving Microneedle Patches with Flexible Pedestals for Improving Effective Drug Delivery, J. Control. Release, 265, 113, 10.1016/j.jconrel.2016.08.031 · doi:10.1016/j.jconrel.2016.08.031
- Nguyen, 2015, Enhanced Skin Delivery of Vismodegib by Microneedle Treatment, Drug Deliv. Transl. Res., 5, 407, 10.1007/s13346-015-0241-3 · doi:10.1007/s13346-015-0241-3
- Gupta, 2011, Infusion Pressure and Pain During Microneedle Injection into Skin of Human Subjects, Biomaterials, 32, 6823, 10.1016/j.biomaterials.2011.05.061 · DOI
- Gill, 2008, Effect of Microneedle Design on Pain in Human Volunteers, Clin. J. Pain, 24, 585, 10.1097/AJP.0b013e31816778f9 · DOI · Paper page
- Gupta, 2011, Kinetics of Skin Resealing after Insertion of Microneedles in Human Subjects, J. Control. Release, 154, 148, 10.1016/j.jconrel.2011.05.021 · DOI · Paper page
- Sasaki, 2008, Mesenchymal Stem Cells Are Recruited into Wounded Skin and Contribute to Wound Repair by Transdifferentiation into Multiple Skin Cell Type, J. Immunol., 180, 2581, 10.4049/jimmunol.180.4.2581 · DOI · Paper page
- Maharlooei, 2011, Adipose Tissue Derived Mesenchymal Stem Cell (AD-MSC) Promotes Skin Wound Healing in Diabetic Rats, Diabetes Res. Clin. Pract., 93, 228, 10.1016/j.diabres.2011.04.018 · DOI · Paper page
- Maxson, 2012, Concise Review: Role of Mesenchymal Stem Cells in Wound Repair, STEM Cells Transl. Med., 1, 142, 10.5966/sctm.2011-0018 · DOI · Paper page
- Nuschke, 2013, Activity of Mesenchymal Stem Cells in Therapies for Chronic Skin Wound Healing, Organogenesis, 10, 29, 10.4161/org.27405 · DOI · Paper page
- Shareef, 2015, Role of Whole Bone Marrow, Whole Bone Marrow Cultured Cells, and Mesenchymal Stem Cells in Chronic Wound Healing, Stem Cell Res. Ther., 6, 24, 10.1186/s13287-015-0001-9 · DOI
- Motegi, 2017, Mesenchymal Stem Cells: The Roles and Functions in Cutaneous Wound Healing and Tumor Growth, J. Dermatol. Sci., 86, 83, 10.1016/j.jdermsci.2016.11.005 · DOI
- Bryant, 2017, Programmable Hydrogels for Cell Encapsulation and Neo-Tissue Growth to Enable Personalized Tissue Engineering, Adv. Healthc. Mater., 7, 1700605, 10.1002/adhm.201700605 · DOI
- Duscher, 2015, Stem Cells in Wound Healing: The Future of Regenerative Medicine? A Mini-Review, Gerontology, 62, 216, 10.1159/000381877 · DOI · Paper page
- Rosemann, 2014, Why Regenerative Stem Cell Medicine Progresses Slower Than Expected, J. Cell. Biochem., 115, 2073, 10.1002/jcb.24894 · DOI
- Kirby, 2015, Stem Cells for Cutaneous Wound Healing, BioMed Res. Int., 2015, 285869, 10.1155/2015/285869 · DOI
- Cerqueira, 2016, Stem Cells in Skin Wound Healing: Are We There Yet?, Adv. Wound Care, 5, 64, 10.1089/wound.2014.0607 · DOI
- Dash, B., Xu, Z., Lin, L., Koo, A., Ndon, S., Berthiaume, F., Dardik, A., and Hsia, H. (2018). Stem Cells and Engineered Scaffolds for Regenerative Wound Healing. Bioengineering, 5. · DOI
- Dickinson, 2016, Engineered Biopolymeric Scaffolds for Chronic Wound Healing, Front. Physiol., 7, 1, 10.3389/fphys.2016.00341 · DOI · Paper page
- Bakhshayesh, 2017, Recent Advances on Biomedical Applications of Scaffolds in Wound Healing and Dermal Tissue Engineering, Artif. Cells Nanomed. Biotechnol., 46, 691, 10.1080/21691401.2017.1349778 · DOI · Paper page
- Han, 2016, Microribbon-based Hydrogels Accelerate Stem Cell-based Bone Regeneration in a Mouse Critical-size Cranial, J. Biomed. Mater. Res. Part A, 104, 1321, 10.1002/jbm.a.35715 · DOI
- Wong, 1986, Bioartificial Liver: Implanted Artificial Cells Microencapsulated Living Hepatocytes Increases Survival of Liver Failure Rats, Int. J. Artif. Organs, 9, 335, 10.1177/039139888600900515 · DOI
- Wright, B., Hopkinson, A., Leyland, M., and Connon, C.J. (2013). The Secretome of Alginate-Encapsulated Limbal Epithelial Stem Cells Modulates Corneal Epithelial Cell Proliferation. PLoS ONE, 8. · doi:10.1371/journal.pone.0070860
- Schmitt, A., Rödel, P., Anamur, C., Seeliger, C., Imhoff, A.B., Herbst, E., Vogt, S., van Griensven, M., Winter, G., and Engert, J. (2015). Calcium Alginate Gels as Stem Cell Matrix—Making Paracrine Stem Cell Activity Available for Enhanced Healing after Surgery. PLoS ONE, 10. · DOI
- Bussche, 2015, Microencapsulated Equine Mesenchymal Stromal Cells Promote Cutaneous Wound Healing in Vitro, Stem Cell Res. Ther., 6, 1, 10.1186/s13287-015-0037-x · DOI
- Cooke, 2017, Geometric Confinement is Required for Recovery and Maintenance of Chondrocyte Phenotype in Alginate, APL Bioeng., 1, 016104, 10.1063/1.5006752 · DOI
- Gualeni, 2018, Minimally invasive and targeted therapeutic cell delivery to the skin using microneedle devices, Br. J. Dermatol., 178, 731, 10.1111/bjd.15923 · DOI
- Boniface, 2018, Cell Delivery Using Microneedle Devices: A New Approach to Treat Depigmenting Disorders, Br. J. Dermatol., 178, 583, 10.1111/bjd.16159 · doi:10.1111/bjd.16159
- Mitteregger, 1999, Rotary Cell Culture System (RCCS): A New Method for Cultivating Hepatocytes on Microcarriers, Int. J. Artif. Organs, 22, 816, 10.1177/039139889902201207 · DOI
- Baudoin, 2011, Behavior of HepG2/C3A Cell Cultures in a Microfluidic Bioreactor, Biochem. Eng. J., 53, 172, 10.1016/j.bej.2010.10.007 · DOI
- Deng, 2014, Enhanced Liver Functions of HepG2 Cells in the Alginate/Xyloglucan Scaffold, Biotechnol. Lett., 37, 235, 10.1007/s10529-014-1663-6 · doi:10.1007/s10529-014-1663-6
- Ratner, B.D., Hoffman, A.S., Schoen, F.J., and Lemons, J.E. (2013). Biomaterials Science, An Introduction to Materials in Medicine, Elsevier. [3rd ed.]. Chapter 1.2.6.
- Asi, 2012, Comparative Diffusivity Measurements for Alginate-based Atomized and Inkjet-Bioprinted Artificial Cells using Fluorescence Microscopy, Artif. Cells Nanomed. Biotechnol., 41, 196
- Wang, 1996, Influence of Process Parameters on Stereolithography Part Shrinkage, Mater. Des., 17, 205, 10.1016/S0261-3069(97)00008-3 · DOI
- Huang, 2014, Optimal Offline Compensation of Shape Shrinkage for Three-dimensional Printing Processes, IIE Trans., 47, 431, 10.1080/0740817X.2014.955599 · DOI · Paper page
- Karalekas, 2003, Study of Shrinkage Strains in a Stereolithography Cured Acrylic Photopolymer Resin, J. Mater. Process. Technol., 136, 146, 10.1016/S0924-0136(03)00028-1 · DOI
- Wallace, 2014, Validating Continuous Digital Light Processing (cDLP) Additive Manufacturing Accuracy and Tissue Engineering Utility of a Dye-initiator Package, Biofabrication, 6, 015003, 10.1088/1758-5082/6/1/015003 · DOI
- Karrer, 1992, Shrinkage Effects in Photopolymerizable Resins Containing Filling Agents: Application to Stereophotolithography, J. Polym. Sci. Part A Polym. Chem., 30, 2715, 10.1002/pola.1992.080301307 · doi:10.1002/pola.1992.080301307
- Vitale, A., and Cabral, J. (2016). Frontal Conversion and Uniformity in 3D Printing by Photopolymerisation. Materials, 9. · DOI
- Huang, 2017, Preparation of a Novel Hybrid Type Photosensitive Resin for Stereolithography in 3D Printing and Testing on the Accuracy of the Fabricated Parts, J. Wuhan Univ. Technol. Mater. Sci. Ed., 32, 726, 10.1007/s11595-017-1659-x · doi:10.1007/s11595-017-1659-x
- Harrison, R.G., Todd, P.W., Rudge, S.R., and Petrides, D. (2002). Bioseparations Science and Engineering, Oxford University Press. [1st ed.].
- Prakash, S. (2007). Artificial Cells, Cell Engineering and Therapy, Woodhead Publishing. · doi:10.1533/9781845693077
- Chang, T.M.S. (2013). High-Throughput Methods for Miniaturization of Implantable Artificial Cells. Selected Topics in Nanomedicine, World Scientific Publishing. · doi:10.1142/8776
- Seaton, 2015, Porcine Models of Cutaneous Wound Healing, ILAR J., 56, 127, 10.1093/ilar/ilv016 · DOI · Paper page
- Ligon, 2017, Polymers for 3D Printing and Customized Additive Manufacturing, Chem. Rev., 117, 10212, 10.1021/acs.chemrev.7b00074 · DOI · Paper page
- Tappa, K., and Jammalamadaka, U. (2018). Novel Biomaterials Used in Medical 3D Printing Techniques. J. Funct. Biomater., 9. · DOI · Paper page
- Kundu, A., Ausaf, T., and Rajaraman, S. (2018). 3D Printing, Ink Casting and Micromachined Lamination (3D PICLμM): A Makerspace Approach to the Fabrication of Biological Microdevices. Micromachines, 9. · DOI
- Jager, 2003, Comprehensive biocompatibility testing of a new PMMA-hA bone cement versus conventional PMMA cement in vitro, Biomater. Sci. Polym. Ed., 14, 1283, 10.1163/156856203322553491 · doi:10.1163/156856203322553491
- Frazer, 2005, PMMA: An essential material in medicine and dentistry, J. Long-Term Eff. Med. Implants, 15, 629, 10.1615/JLongTermEffMedImplants.v15.i6.60 · DOI · Paper page
- Cheng, 2016, Michael Addition Polymerization of Trifunctional Amine and Acrylic Monomer: A Versatile Platform for Development of Biomaterials, Biomacromolecules, 17, 3115, 10.1021/acs.biomac.6b01043 · DOI
- Herrick, D., and Klein, R. (2016, January 13–16). Emerging Health and Safety Issues in Makerspaces. Proceedings of the 1st International Symposium on Academic Makerspaces, Cambridge, MA, USA.
- Azimi, 2016, Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments, Environ. Sci. Technol., 50, 1260, 10.1021/acs.est.5b04983 · DOI · Paper page
- Linan, L.Z., Lima, N.M.N., Benatti, C., Xavier, M., Rodrigues, A.A., Manenti, F., Jardini, A., Filho, R.M., and Gilioli, R. (2018). Cytotoxicity Assessment of a Poly(methyl methacrylate) Synthesized for the Direct Fabrication of Bone Tissues. Braz. Arch. Biol. Technol., 61. · doi:10.1590/1678-4324-2018160526
- Simpliciano, 2013, Cross-Linked Alginate Film Pore Size Determination Using Atomic Force Microscopy and Validation Using Diffusivity Determinations, J. Surf. Eng. Mater. Adv. Technol., 3, 1
- Baier, 2006, Surface behavior of biomaterials: The theta surface for biocompatibility, J. Mater. Sci. Mater. Med., 17, 1057, 10.1007/s10856-006-0444-8 · DOI · Paper page
- Buergers, 2007, Bacterial adhesion of Streptococcus mutans to provisional fixed prosthodontic material, J. Prosthet. Dent., 98, 461, 10.1016/S0022-3913(07)60146-2 · DOI
- He, Q., Chen, H., Huang, L., Dong, J., Guo, D., Mao, M., and Lei, W. (2012). Porous Surface Modified Bioactive Bone Cement for Enhanced Bone Bonding. PLoS ONE, 7. · doi:10.1371/journal.pone.0042525
- Maluta, 2014, The Biocompatibility of Porous vs Non-Porous Bone Cements: A New Methodological Approach, Eur. J. Histochem., 58, 2255
- Xie, 2007, Electrospray in the dripping mode for cell microencapsulation, J. Colloid Interface Sci., 312, 247, 10.1016/j.jcis.2007.04.023 · DOI
- Bassett, 2016, Versatile, cell and chip friendly method to gel alginate in microfluidic devices, Lab Chip, 16, 3718, 10.1039/C6LC00769D · DOI
- Yang, 2016, Single mammalian cell encapsulation by in situ polymerization, J. Mater. Chem. B, 47, 7662, 10.1039/C6TB02491B · DOI
- Jing, 2010, Cardiac Cell Generation from Encapsulated Embryonic Stem Cells in Static and Scalable Culture Systems, Cell Transplant., 19, 1397, 10.3727/096368910X513955 · DOI
- Zhang, W., and He, X. (2009). Encapsulation of Living Cells in Small (~100 μm) Alginate Microcapsules by Electrostatic Spraying: A Parametric Study. ASME. J. Biomech. Eng., 131. · DOI
- Wilson, 2014, Alginate Encapsulation Parameters Influence the Differentiation of Microencapsulated Embryonic Stem Cell Aggregates, Biotechnol. Bioeng., 111, 618, 10.1002/bit.25121 · DOI
- Gryshkov, O., Pogozhykh, D., Hofmann, N., Pogozhykh, O., Mueller, T., and Glasmacher, B. (2014). Encapsulating Non-Human Primate Multipotent Stromal Cells in Alginate via High Voltage for Cell-Based Therapies and Cryopreservation. PLoS ONE, 9. · DOI
- Ouyang, 2015, 3D printing of HEK 293FT cell-laden hydrogel into macroporous constructs with high cell viability and normal biological functions, Biofabrication, 7, 015010, 10.1088/1758-5090/7/1/015010 · DOI
- Lu, J., Zhang, X., Li, J., Yu, L., Chen, E., Zhu, D., Zhang, Y., and Li, L. (2016). A New Fluidized Bed Bioreactor Based on Diversion-Type Microcapsule Suspension for Bioartificial Liver Systems. PLoS ONE, 11. · DOI
- Malafaya, 2007, Natural–origin Polymers as Carriers and Scaffolds for Biomolecules and Cell Delivery in Tissue Engineering Applications, Adv. Drug Deliv. Rev., 59, 207, 10.1016/j.addr.2007.03.012 · DOI · Paper page
- Duque, R., Shan, Y., Joya, M., Ravichandran, N., Asi, B., Mobed-Miremadi, M., Mulrooney, S., McNeil, M., and Prakash, S. (2018). Effect of artificial cell miniaturization on urea degradation by immobilized E. coli DH5α (pKAU17). Artif. Cells Nanomed. Biotechnol., 1–10. · DOI
- Peppas, 1991, Physiologically Responsive Hydrogels, J. Bioact. Compat. Polym., 6, 241, 10.1177/088391159100600303 · DOI
- Denton, 2016, Counterion-Induced Swelling of Ionic Microgels, J. Chem. Phys., 145, 164901, 10.1063/1.4964864 · doi:10.1063/1.4964864
- Hwang, 2009, The use of murine embryonic stem cells, alginate encapsulation, and rotary microgravity bioreactor in bone tissue engineering, Biomaterials, 30, 499, 10.1016/j.biomaterials.2008.07.028 · DOI · Paper page
- Chan, 2011, Effect of formulation of alginate beads on their mechanical behavior and stiffness, Particuology, 9, 228, 10.1016/j.partic.2010.12.002 · DOI · Paper page
- Briscoe, 1998, Adhesive Contact Deformation of a Single Microelastomeric Sphere, J. Colloid Interface Sci., 200, 256, 10.1006/jcis.1997.5365 · doi:10.1006/jcis.1997.5365
- Yeatts, 2011, Formation of an Aggregated Alginate Construct in a Tubular Perfusion System, Tissue Eng. Part C Methods, 17, 1171, 10.1089/ten.tec.2011.0263 · DOI
Cited by
Hollow microneedles: A perspective in biomedical applications
Cárcamo-Martínez, Á., Mallon, B., Domínguez-Robles, J., Vora, L. K., Anjani, Q. K., & Donnelly, R. F. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120455 · Cited by 285
Nizioł, M., Paleczny, J., Junka, A., Shavandi, A., Dawiec-Liśniewska, A., & Podstawczyk, D. (2021) · Bioengineering · doi:10.3390/bioengineering8060079 · Cited by 85
Metadata
- Authors
- Farias, C., Lyman, R., Hemingway, C., Chau, H., Mahacek, A., Bouzos, E., & Mobed-Miremadi, M.
- Venue
- Bioengineering
- Publisher
- MDPI AG
- Published
- 2018-07-31
- Volume
- 5
- Issue
- 3
- Pages
- 59
- ISSN
- 2306-5354
- Cited by
- 78
- References
- 4
- Language
- en
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.