The DOI matches its Crossref record; 94 of the 94 references it cites were found in a registry or an index.
Opportunities and Adoption Challenges of AI in the Construction Industry: A PRISMA Review
Open accessAbstract
Artificial intelligence (AI) is a powerful technology with a range of capabilities, which are beginning to become apparent in all industries nowadays. The increased popularity of AI in the construction industry, however, is rather limited in comparison to other industry sectors. Moreover, despite AI being a hot topic in built environment research, there are limited review studies that investigate the reasons for the low-level AI adoption in the construction industry. This study aims to reduce this gap by identifying the adoption challenges of AI, along with the opportunities offered, for the construction industry. To achieve the aim, the study adopts a systematic literature review approach using the PRISMA protocol. In addition, the systematic review of the literature focuses on the planning, design, and construction stages of the construction project lifecycle. The results of the review reveal that (a) AI is particularly beneficial in the planning stage as the success of construction projects depends on accurate events, risks, and cost forecasting; (b) the major opportunity in adopting AI is to reduce the time spent on repetitive tasks by using big data analytics and improving the work processes; and (c) the biggest challenge to incorporate AI on a construction site is the fragmented nature of the industry, which has resulted in issues of data acquisition and retention. The findings of the study inform a range of parties that operate in the construction industry concerning the opportunities and challenges of AI adaptability and help increase the market acceptance of AI practices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
“Why Should I Trust You?”: Explaining the Predictions of Any Classifier
Ribeiro, M., Singh, S., & Guestrin, C. (2016) · Proceedings of the 2016 Conference of the North American Chapter of the Association for Computational Linguistics: Demonstrations · doi:10.18653/v1/n16-3020 · Cited by 6,682
Digital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
Oesterreich, T. D., & Teuteberg, F. (2016) · Computers in Industry · doi:10.1016/j.compind.2016.09.006 · Cited by 1,526
Pan, Y., & Zhang, L. (2021) · Automation in Construction · doi:10.1016/j.autcon.2020.103517 · Cited by 1,336
Towards a semantic Construction Digital Twin: Directions for future research
Boje, C., Guerriero, A., Kubicki, S., & Rezgui, Y. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103179 · Cited by 1,324
Abioye, S. O., Oyedele, L. O., Akanbi, L., Ajayi, A., Davila Delgado, J. M., Bilal, M., Akinade, O. O., & Ahmed, A. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103299 · Cited by 1,015
Davila Delgado, J. M., Oyedele, L., Ajayi, A., Akanbi, L., Akinade, O., Bilal, M., & Owolabi, H. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100868 · Cited by 607
Darko, A., Chan, A. P. C., Adabre, M. A., Edwards, D. J., Hosseini, M. R., & Ameyaw, E. E. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103081 · Cited by 603
3D Printing of Buildings and Building Components as the Future of Sustainable Construction?
Hager, I., Golonka, A., & Putanowicz, R. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.07.357 · Cited by 593
Lee, M., Yun, J. J., Pyka, A., Won, D., Kodama, F., Schiuma, G., Park, H., Jeon, J., Park, K., Jung, K., et al. (2018) · Journal of Open Innovation: Technology, Market, and Complexity · doi:10.3390/joitmc4030021 · Cited by 584
Yigitcanlar, T., Desouza, K., Butler, L., & Roozkhosh, F. (2020) · Energies · doi:10.3390/en13061473 · Cited by 555
Deep learning in the construction industry: A review of present status and future innovations
Akinosho, T. D., Oyedele, L. O., Bilal, M., Ajayi, A. O., Delgado, M. D., Akinade, O. O., & Ahmed, A. A. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101827 · Cited by 537
BIM-based fall hazard identification and prevention in construction safety planning
Zhang, S., Sulankivi, K., Kiviniemi, M., Romo, I., Eastman, C. M., & Teizer, J. (2015) · Safety Science · doi:10.1016/j.ssci.2014.08.001 · Cited by 447
Li, L., Rong, S., Wang, R., & Yu, S. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126673 · Cited by 441
Grover, P., Kar, A. K., & Dwivedi, Y. K. (2022) · Annals of Operations Research · doi:10.1007/s10479-020-03683-9 · Cited by 419
Layer-Wise Relevance Propagation for Neural Networks with Local Renormalization Layers
Binder, A., Montavon, G., Lapuschkin, S., Müller, K.-R., & Samek, W. (2016) · Lecture Notes in Computer Science · doi:10.1007/978-3-319-44781-0_8 · Cited by 418
Building absorptive capacity to organise inbound open innovation in traditional industries
Spithoven, A., Clarysse, B., & Knockaert, M. (2010) · Technovation · doi:10.1016/j.technovation.2009.08.004 · Cited by 416
Integration of BIM and GIS in sustainable built environment: A review and bibliometric analysis
Wang, H., Pan, Y., & Luo, X. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.03.005 · Cited by 384
Yigitcanlar, T., & Cugurullo, F. (2020) · Sustainability · doi:10.3390/su12208548 · Cited by 337
Na, S., Heo, S., Han, S., Shin, Y., & Roh, Y. (2022) · Buildings · doi:10.3390/buildings12020090 · Cited by 330
Machine learning algorithms for construction projects delay risk prediction
Gondia, A., Siam, A., El-Dakhakhni, W., & Nassar, A. H. (2020) · Journal of Construction Engineering and Management · doi:10.1061/(asce)co.1943-7862.0001736 · Cited by 327
Yigitcanlar, T., Mehmood, R., & Corchado, J. M. (2021) · Sustainability · doi:10.3390/su13168952 · Cited by 319
Newman, C., Edwards, D., Martek, I., Lai, J., Thwala, W. D., & Rillie, I. (2021) · Smart and Sustainable Built Environment · doi:10.1108/sasbe-02-2020-0016 · Cited by 311
Safety leading indicators for construction sites: A machine learning approach
Poh, C. Q. X., Ubeynarayana, C. U., & Goh, Y. M. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.03.022 · Cited by 290
Utilizing Industry 4.0 on the Construction Site: Challenges and Opportunities
Turner, C. J., Oyekan, J., Stergioulas, L., & Griffin, D. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.3002197 · Cited by 290
Li, W., Yigitcanlar, T., Erol, I., & Liu, A. (2021) · Energy Research & Social Science · doi:10.1016/j.erss.2021.102211 · Cited by 275
Self-citationYigitcanlar, T., Corchado, J. M., Mehmood, R., Li, R. Y. M., Mossberger, K., & Desouza, K. (2021) · Journal of Open Innovation: Technology, Market, and Complexity · doi:10.3390/joitmc7010071 · Cited by 245
Self-citationA survey of climbing robots: Locomotion and adhesion
Chu, B., Jung, K., Han, C.-S., & Hong, D. (2010) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-010-0075-3 · Cited by 232
A scientometric analysis and critical review of computer vision applications for construction
Martinez, P., Al-Hussein, M., & Ahmad, R. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.102947 · Cited by 221
Automated vision tracking of project related entities
Brilakis, I., Park, M.-W., & Jog, G. (2011) · Advanced Engineering Informatics · doi:10.1016/j.aei.2011.01.003 · Cited by 216
Yigitcanlar, T., Kankanamge, N., Regona, M., Ruiz Maldonado, A., Rowan, B., Ryu, A., Desouza, K. C., Corchado, J. M., Mehmood, R., & Li, R. Y. M. (2020) · Journal of Open Innovation: Technology, Market, and Complexity · doi:10.3390/joitmc6040187 · Cited by 212
Self-citationZhang, S., Li, Z., Ning, X., & Li, L. (2021) · Journal of Environmental Management · doi:10.1016/j.jenvman.2021.112440 · Cited by 209
How do we conquer the growth limits of capitalism? Schumpeterian Dynamics of Open Innovation
Yun, J. J. (2015) · Journal of Open Innovation: Technology, Market, and Complexity · doi:10.1186/s40852-015-0019-3 · Cited by 204
Industry 4.0 for the Construction Industry: Review of Management Perspective
Maskuriy, R., Selamat, A., Maresova, P., Krejcar, O., & David, O. O. (2019) · Economies · doi:10.3390/economies7030068 · Cited by 202
Causal factors and connections in construction accidents
Winge, S., Albrechtsen, E., & Mostue, B. A. (2019) · Safety Science · doi:10.1016/j.ssci.2018.10.015 · Cited by 201
Critical Management Practices Influencing On-Site Waste Minimization in Construction Projects
Ajayi, S. O., Oyedele, L. O., Bilal, M., Akinade, O. O., Alaka, H. A., & Owolabi, H. A. (2017) · Waste Management · doi:10.1016/j.wasman.2016.10.040 · Cited by 200
Prediction of Risk Delay in Construction Projects Using a Hybrid Artificial Intelligence Model
Yaseen, Z. M., Ali, Z. H., Salih, S. Q., & Al-Ansari, N. (2020) · Sustainability · doi:10.3390/su12041514 · Cited by 194
Building information modeling based building design optimization for sustainability
Liu, S., Meng, X., & Tam, C. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.06.037 · Cited by 192
Edirisinghe, R. (2019) · Engineering, Construction and Architectural Management · doi:10.1108/ecam-04-2017-0066 · Cited by 185
Yigitcanlar, T., Butler, L., Windle, E., Desouza, K. C., Mehmood, R., & Corchado, J. M. (2020) · Sensors · doi:10.3390/s20102988 · Cited by 185
Self-citationEngineering applications of artificial intelligence: A bibliometric analysis of 30 years (1988–2018)
Shukla, A. K., Janmaijaya, M., Abraham, A., & Muhuri, P. K. (2019) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2019.06.010 · Cited by 183
Afzal, F., Yunfei, S., Nazir, M., & Bhatti, S. M. (2021) · International Journal of Managing Projects in Business · doi:10.1108/ijmpb-02-2019-0047 · Cited by 172
Elmousalami, H. H. (2020) · IEEE Transactions on Engineering Management · doi:10.1109/tem.2020.2972078 · Cited by 167
Chien, C.-F., Dauzère-Pérès, S., Huh, W. T., Jang, Y. J., & Morrison, J. R. (2020) · International Journal of Production Research · doi:10.1080/00207543.2020.1752488 · Cited by 159
AI-based prediction of independent construction safety outcomes from universal attributes
Baker, H., Hallowell, M. R., & Tixier, A. J. ‐. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103146 · Cited by 155
TOWARDS DIGITIZING THE CONSTRUCTION INDUSTRY: STATE OF THE ART OF CONSTRUCTION 4.0
Hossain, M. A., & Nadeem, A. (2019) · Proceedings of International Structural Engineering and Construction · doi:10.14455/isec.2019.6(1).con-13 · Cited by 154
Yiğitcanlar, T., Wilson, M. I., & Kamruzzaman, M. (2019) · Journal of Open Innovation Technology Market and Complexity · doi:10.3390/joitmc5020024 · Cited by 137
Automation in construction scheduling: a review of the literature
Faghihi, V., Nejat, A., Reinschmidt, K. F., & Kang, J. H. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7339-0 · Cited by 123
Artificial Intelligence and Robotics in Smart City Strategies and Planned Smart Development
Юрьевич, Г. О., & Thornbush, M. J. (2020) · Smart Cities · doi:10.3390/smartcities3040056 · Cited by 116
Technology convergence, open innovation, and dynamic economy
Park, H. S. (2017) · Journal of Open Innovation Technology Market and Complexity · doi:10.1186/s40852-017-0074-z · Cited by 112
Vilutienė, T., Kalibatienė, D., Hosseini, M. R., Pellicer, E., & Zavadskas, E. K. (2019) · Advances in Civil Engineering · doi:10.1155/2019/5290690 · Cited by 107
Butler, L., Yiğitcanlar, T., & Paz, A. (2020) · Applied Sciences · doi:10.3390/app10186306 · Cited by 105
Deep Learning Models for Health and Safety Risk Prediction in Power Infrastructure Projects
Ajayi, A., Oyedele, L. O., Owolabi, H. A., Akinadé, O. O., Bilal, M., Delgado, J. M. D., & Akanbi, L. (2019) · Risk Analysis · doi:10.1111/risa.13425 · Cited by 102
Smart City 4.0 from the Perspective of Open Innovation
Yun, Y., & Lee, M. (2019) · Journal of Open Innovation Technology Market and Complexity · doi:10.3390/joitmc5040092 · Cited by 99
Automation in the Prefab and Modular Construction Industry
Neelamkavil, J. (2009) · International Symposium on Automation and Robotics in Construction (ISARC) · doi:10.22260/isarc2009/0018 · Cited by 95
Knowledge-based system for resolving design clashes in building information models
Hsu, H.-C., Chang, S. T., Chen, C.-C., & Wu, I.-C. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.103001 · Cited by 92
Clients’ assessment of architects’ performance in building delivery process: Evidence from Nigeria
Oyedele, L. O., & Tham, K. W. (2006) · Building and Environment · doi:10.1016/j.buildenv.2005.06.030 · Cited by 91
Kankanamge, N., Yiğitcanlar, T., & Goonetilleke, A. (2021) · Telematics and Informatics · doi:10.1016/j.tele.2021.101729 · Cited by 85
Regona, M., Yiğitcanlar, T., Xia, B., & Li, R. Y. M. (2022) · Journal of Open Innovation Technology Market and Complexity · doi:10.3390/joitmc8010016 · Cited by 84
Self-citationAnalysis of build-up of heavy metals and volatile organics on urban roads in Gold Coast, Australia
Mahbub, P., Goonetilleke, A., Ayoko, G. A., Egodawatta, P., & Yigitcanlar, T. (2011) · Water Science and Technology · doi:10.2166/wst.2011.151 · Cited by 82
Self-citationBamgbade, J. A., Nawi, M. N. M., Kamaruddeen, A. M., Adeleke, A. Q., & Salimon, M. G. (2019) · International Journal of Construction Management · doi:10.1080/15623599.2019.1634666 · Cited by 79
Amusan, L. M., Aigbavboa, C. O., Fayomi, O. S. I., & James, O. (2020) · Buildings · doi:10.3390/buildings10120221 · Cited by 75
Son, H., Kim, C., Kim, H., Han, S. H., & Kim, M. K. (2010) · KSCE Journal of Civil Engineering · doi:10.1007/s12205-010-0131-7 · Cited by 71
How does open innovation enhance productivity? An exploration in the construction ecosystem
Greco, M., Grimaldi, M., Locatelli, G., & Serafini, M. (2021) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2021.120740 · Cited by 70
TECHNOLOGY DEVELOPMENT IN CONSTRUCTION: A CONTINUUM FROM DISTANT PAST INTO THE FUTURE
Skibniewski, M. J., & Zavadskas, E. K. (2013) · Journal of Civil Engineering and Management · doi:10.3846/13923730.2012.756060 · Cited by 69
Not Deep Learning but Autonomous Learning of Open Innovation for Sustainable Artificial Intelligence
Yun, J., Lee, D., Ahn, H., Park, K., & Yigitcanlar, T. (2016) · Sustainability · doi:10.3390/su8080797 · Cited by 68
Self-citationBusiness Models in the Industry 4.0 Environment—Results of Web of Science Bibliometric Analysis
Grabowska, S., & Saniuk, S. (2022) · Journal of Open Innovation Technology Market and Complexity · doi:10.3390/joitmc8010019 · Cited by 66
A multi-agent model to manage risks in construction project (SMACC)
Taillandier, F., Taillandier, P., Tepeli, E., Breysse, D., Mehdizadeh, R., & Khartabil, F. (2015) · Automation in Construction · doi:10.1016/j.autcon.2015.06.005 · Cited by 65
Automation and Robotics in Construction and Civil Engineering
Kim, M. J., Chi, H.-L., Wang, X., & Ding, L. (2015) · Journal of Intelligent & Robotic Systems · doi:10.1007/s10846-015-0252-9 · Cited by 65
Artificial intelligence: Construction technology's next frontier
Blanco, J., Fuchs, S., Parsons, M., & Ribeirinho, M. J. (2018) · Cited by 63
Temporal image analytics for abnormal construction activity identification
Lin, Z., Chen, A. Y., & Hsieh, S. (2021) · Automation in Construction · doi:10.1016/j.autcon.2021.103572 · Cited by 60
Challenges Involved in Adopting BIM on the Construction Jobsite
Young, D., Panthi, K., & Noor, O. (2021) · EPiC series in built environment · doi:10.29007/f8r3 · Cited by 57
Greening the Artificial Intelligence for a Sustainable Planet: An Editorial Commentary
Yiğitcanlar, T. (2021) · Sustainability · doi:10.3390/su132413508 · Cited by 57
Building industrialization: robotized assembly of modular products
Martínez, S., Jardón, A., Navarro, J. M., & Gonzalez, P. (2008) · Assembly Automation · doi:10.1108/01445150810863716 · Cited by 55
Deep learning and Boosted trees for injuries prediction in power infrastructure projects
Oyedele, A. O., Ajayi, A., Oyedele, L. O., Delgado, J. M. D., Akanbi, L., Akinadé, O. O., Owolabi, H. A., & Bilal, M. (2021) · Applied Soft Computing · doi:10.1016/j.asoc.2021.107587 · Cited by 54
Mouloodi, S., Rahmanpanah, H., Gohery, S., Burvill, C. R., Tse, K. M., & Davies, H. M. S. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104728 · Cited by 54
Towards a responsible integration of artificial intelligence technology in the construction sector
Pillai, V. S., & Matus, K. (2020) · Science and Public Policy · doi:10.1093/scipol/scaa073 · Cited by 50
Application of Artifical Intelligence in Construction Waste Management
Ali, T. H., Akhund, M. A., Memon, N. A., Memon, A. H., Imad, H. U., & Khahro, S. H. (2019) · International Conference on Industrial Technology and Management (ICITM) · doi:10.1109/icitm.2019.8710680 · Cited by 47
Quantitative Review of Construction 4.0 Technology Presence in Construction Project Research
Schönbeck, P., Löfsjögård, M., & Ansell, A. (2020) · Buildings · doi:10.3390/buildings10100173 · Cited by 46
Monroe, D. (2018) · Communications of the ACM · doi:10.1145/3276742 · Cited by 41
Cities of the future? The potential impact of artificial intelligence
Kassens-Noor, E., & Hintze, A. (2020) · AI · doi:10.3390/ai1020012 · Cited by 36
Modeling and Interpreting Expert Disagreement About Artificial Superintelligence
Baum, S. D., Barrett, A., & Yampolskiy, R. V. (2017) · Informatica · Cited by 32
A Review of ICT Technology In Construction
Adwan, E. J., & Al-Soufi, A. (2016) · International Journal of Managing Information Technology · doi:10.5121/ijmit.2016.8401 · Cited by 28
Construction Automation and Robotics in the 21st Century
Hasegawa, Y. (2006) · Proceedings of the ... ISARC · doi:10.22260/isarc2006/0106 · Cited by 24
State-of-the-Art Review on the Applicability of AI Methods to Automated Construction Manufacturing
Hatami, M., Flood, I., Franz, B. W., & Zhang, X. (2019) · ASCE International Conference on Computing in Civil Engineering (i3CE) · doi:10.1061/9780784482438.047 · Cited by 21
Han, C.-S. (2011) · Proceedings of the ... ISARC · doi:10.22260/isarc2011/0297 · Cited by 20
Hardie, M., Miller, G., Manley, K., & McFallan, S. (2006) · Portland International Conference on Management of Engineering and Technology (PICMET) · doi:10.1109/picmet.2005.1509697 · Cited by 19
Bibliometric Review of Artificial Intelligence (AI) in Construction Engineering and Management
Xiao, C., Liu, Y., & Akhnoukh, A. (2018) · International Conference on Construction and Real Estate Management (ICCREM) · doi:10.1061/9780784481721.004 · Cited by 19
Insolvency of Small Civil Engineering Firms: Critical Strategic Factors
Alaka, H., Oyedele, L. O., Owolabi, H. A., Bilal, M., Ajayi, S. O., & Akinadé, O. O. (2016) · Journal of Professional Issues in Engineering Education and Practice · doi:10.1061/(asce)ei.1943-5541.0000321 · Cited by 14
Automation And Robotics In The Construction Industry - A Review
(2019) · i-manager’s Journal on Future Engineering and Technology · doi:10.26634/jfet.14.3.15654 · Cited by 7
Application of Artificial Intelligence to Automate Construction Materials Data Classification
Chunyaem, W., Charoensiriwath, C., Panuwatwanich, K., Saito, S., & Padungtin, P. (2019) · Creative Construction Conference (CCC) · doi:10.3311/ccc2019-002 · Cited by 4
(2020) · AirIuav (Università Iuav di Venezia) · Cited by 4
Cited by
Wach, K., Duong, C. D., Ejdys, J., Kazlauskaitė, R., Korzynski, P., Mazurek, G., Paliszkiewicz, J., & Ziemba, E. (2023) · Entrepreneurial Business and Economics Review · doi:10.15678/eber.2023.110201 · Cited by 584
“The adoption of AI-generated content can also diminish human autonomy and creativity (Regona et al. , 2022).”
BackgroundSon, T. H., Weedon, Z., Yigitcanlar, T., Sanchez, T., Corchado, J. M., & Mehmood, R. (2023) · Sustainable Cities and Society · doi:10.1016/j.scs.2023.104562 · Cited by 396
Self-citationSmart materials and technologies for sustainable concrete construction
Nilimaa, J. (2023) · Developments in the Built Environment · doi:10.1016/j.dibe.2023.100177 · Cited by 387
Regona, M., Yigitcanlar, T., Hon, C., & Teo, M. (2024) · Sustainable Cities and Society · doi:10.1016/j.scs.2024.105499 · Cited by 254
Self-citationYigitcanlar, T., Li, R. Y. M., Beeramoole, P. B., & Paz, A. (2023) · Government Information Quarterly · doi:10.1016/j.giq.2023.101833 · Cited by 142
Self-citation
Metadata
- Authors
- Regona, M., Yigitcanlar, T., Xia, B., & Li, R. Y. M.
- Venue
- Journal of Open Innovation: Technology, Market, and Complexity
- Publisher
- Elsevier BV
- Published
- 2022-03
- Volume
- 8
- Issue
- 1
- Pages
- 45
- ISSN
- 2199-8531 (ISSN-L)
- OpenAlex
- W4214622289
- Cited by
- 543
- References
- 94
- FWCI
- 43.49
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.