The DOI matches its Crossref record; 81 of the 81 references it cites were found in a registry or an index.
Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches
Open accessAbstract
The increase in accessibility of fused filament fabrication (FFF) machines has inspired the scientific community to work towards the understanding of the structural performance of components fabricated with this technology. Numerous attempts to characterize and to estimate the mechanical properties of structures fabricated with FFF have been reported in the literature. Experimental characterization of printed components has been reported extensively. However, few attempts have been made to predict properties of printed structures with computational models, and a lot less work with analytical approximations. As a result, a thorough review of reported experimental characterization and predictive models is presented with the aim of summarizing applicability and limitations of those approaches. Finally, recommendations on practices for characterizing printed materials are given and areas that deserve further research are proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Guo, J., Huang, F., Liu, J., Chen, Y., Wang, W., Cao, B., Zou, Z., Liu, S., Pan, J., Bao, C., et al. (2016) · Scientific Reports · doi:10.1038/srep21230 · Cited by 2,148
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,885
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
Chacón, J. M., Caminero, M. A., García-Plaza, E., & Núñez, P. J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.065 · Cited by 1,603
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
The mechanics of two-dimensional cellular materials
Gibson, L. J., Ashby, M. F., Schajer, G. S., & Robertson, C. I. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0087 · Cited by 1,253
Tymrak, B. M., Kreiger, M., & Pearce, J. M. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.02.038 · Cited by 1,244
3d printing technologies applied for food design: Status and prospects
Godoi, F. C., Prakash, S., & Bhandari, B. R. (2016) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2016.01.025 · Cited by 939
Wu, W., Geng, P., Li, G., Zhao, D., Zhang, H., & Zhao, J. (2015) · Materials · doi:10.3390/ma8095271 · Cited by 881
Fused deposition modeling with polypropylene
Carneiro, O. S., Silva, A. F., & Gomes, R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.053 · Cited by 851
Fused filament fabrication of fiber-reinforced polymers: A review
Brenken, B., Barocio, E., Favaloro, A., Kunc, V., & Pipes, R. B. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.01.002 · Cited by 737
Self-citationRepRap – the replicating rapid prototyper
Jones, R., Haufe, P., Sells, E., Iravani, P., Olliver, V., Palmer, C., & Bowyer, A. (2011) · Robotica · doi:10.1017/s026357471000069x · Cited by 736
Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
Li, N., Li, Y., & Liu, S. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.07.025 · Cited by 707
Weng, Z., Wang, J., Senthil, T., & Wu, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.045 · Cited by 609
Melenka, G. W., Cheung, B. K. O., Schofield, J. S., Dawson, M. R., & Carey, J. P. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.07.018 · Cited by 597
Effect of Layer Orientation on Mechanical Properties of Rapid Prototyped Samples
Es-Said, O. S., Foyos, J., Noorani, R., Mendelson, M., Marloth, R., & Pregger, B. A. (2000) · Materials and Manufacturing Processes · doi:10.1080/10426910008912976 · Cited by 577
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2012) · Journal of Advanced Research · doi:10.1016/j.jare.2011.05.001 · Cited by 576
An Overview of 3D Printing Technologies for Food Fabrication
Sun, J., Zhou, W., Huang, D., Fuh, J. Y. H., & Hong, G. S. (2015) · Food and Bioprocess Technology · doi:10.1007/s11947-015-1528-6 · Cited by 549
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
Masood, S. H., & Song, W. Q. (2004) · Materials & Design · doi:10.1016/j.matdes.2004.02.009 · Cited by 543
Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts
Domingo-Espin, M., Puigoriol-Forcada, J. M., Garcia-Granada, A.-A., Llumà, J., Borros, S., & Reyes, G. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.074 · Cited by 535
Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing
Fernandez-Vicente, M., Calle, W., Ferrandiz, S., & Conejero, A. (2016) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0036 · Cited by 535
Durgun, I., & Ertan, R. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-10-2012-0091 · Cited by 530
Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials
Torrado Perez, A. R., Roberson, D. A., & Wicker, R. B. (2014) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-014-9803-9 · Cited by 523
3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens
Der Klift, F. V., Koga, Y., Todoroki, A., Ueda, M., Hirano, Y., & Matsuzaki, R. (2016) · Open Journal of Composite Materials · doi:10.4236/ojcm.2016.61003 · Cited by 516
The importance of carbon fiber to polymer additive manufacturing
Love, L. J., Kunc, V., Rios, O., Duty, C. E., Elliott, A. M., Post, B. K., Smith, R. J., & Blue, C. A. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.212 · Cited by 493
Casavola, C., Cazzato, A., Moramarco, V., & Pappalettere, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.11.009 · Cited by 493
Rodríguez-Panes, A., Claver, J., & Camacho, A. M. (2018) · Materials · doi:10.3390/ma11081333 · Cited by 477
The effects of PLA color on material properties of 3-D printed components
Wittbrodt, B., & Pearce, J. M. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.09.006 · Cited by 473
Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts
Cantrell, J. T., Rohde, S., Damiani, D., Gurnani, R., DiSandro, L., Anton, J., Young, A., Jerez, A., Steinbach, D., Kroese, C., et al. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2016-0042 · Cited by 433
Structural quality of parts processed by fused deposition
Agarwala, M. K., Jamalabad, V. R., Langrana, N. A., Safari, A., Whalen, P. J., & Danforth, S. C. (1996) · Rapid Prototyping Journal · doi:10.1108/13552549610732034 · Cited by 406
3D printing: the dawn of a new era in manufacturing?
Bogue, R. (2013) · Assembly Automation · doi:10.1108/aa-06-2013-055 · Cited by 371
Croccolo, D., De Agostinis, M., & Olmi, G. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2013.06.041 · Cited by 369
Rodríguez, J. F., Thomas, J. P., & Renaud, J. E. (2001) · Rapid Prototyping Journal · doi:10.1108/13552540110395547 · Cited by 362
Zhang, Y., & Chou, K. (2008) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem990 · Cited by 321
Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
Wang, L., Gramlich, W. M., & Gardner, D. J. (2017) · Polymer · doi:10.1016/j.polymer.2017.03.011 · Cited by 310
Composite Modeling and Analysis for Fabrication of FDM Prototypes with Locally Controlled Properties
Li, L., Sun, Q., Bellehumeur, C. T., & Gu, P. (2002) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(02)70139-4 · Cited by 306
Performance of biocompatible PEEK processed by fused deposition additive manufacturing
Arif, M. F., Kumar, S., Varadarajan, K. M., & Cantwell, W. J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.015 · Cited by 296
Torrado, A. R., & Roberson, D. A. (2016) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-016-0067-4 · Cited by 291
Tensile strength of commercial polymer materials for fused filament fabrication 3D printing
Tanikella, N. G., Wittbrodt, B., & Pearce, J. M. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.03.005 · Cited by 287
Karamooz Ravari, M. R., Kadkhodaei, M., Badrossamay, M., & Rezaei, R. (2014) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2014.08.009 · Cited by 281
Zaldivar, R. J., Witkin, D. B., McLouth, T., Patel, D. N., Schmitt, K., & Nokes, J. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.11.007 · Cited by 277
Mechanical Properties Optimization of Poly-Ether-Ether-Ketone via Fused Deposition Modeling
Deng, X., Zeng, Z., Peng, B., Yan, S., & Ke, W. (2018) · Materials · doi:10.3390/ma11020216 · Cited by 265
Fatigue performance of fused filament fabrication PLA specimens
Gómez-Gras, G., Jerez‐Mesa, R., Travieso-Rodriguez, J. A., & Llumà, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.072 · Cited by 261
Onwubolu, G. C., & Rayegani, F. (2014) · International Journal of Manufacturing Engineering · doi:10.1155/2014/598531 · Cited by 252
Fracture resistance measurement of fused deposition modeling 3D printed polymers
Aliheidari, N., Tripuraneni, R., Ameli, A., & Nadimpalli, S. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.03.016 · Cited by 244
3D Printing and Humanity's First Imperfect Replicator
Bowyer, A. (2014) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2013.0003 · Cited by 218
Gebisa, A., & Lemu, H. (2018) · Materials · doi:10.3390/ma11040500 · Cited by 187
Modelling curved-layered printing paths for fabricating large-scale construction components
Lim, S., Buswell, R. A., Valentine, P. J., Piker, D., Austin, S. A., & De Kestelier, X. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.06.004 · Cited by 183
Three-dimensional finite element analysis simulations of the fused deposition modelling process
Zhang, Y., & Chou, Y. K. (2006) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem572 · Cited by 182
Deposition direction-dependent failure criteria for fused deposition modeling polycarbonate
Hill, N., & Haghi, M. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2013-0039 · Cited by 181
Fracture behavior of additively manufactured acrylonitrile butadiene styrene (ABS) materials
Hart, K. R., & Wetzel, E. D. (2017) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2017.03.028 · Cited by 181
Impact absorption capacity of 3D-printed components fabricated by fused deposition modelling
Tsouknidas, A., Pantazopoulos, M. S., Katsoulis, I., Fasnakis, D., Maropoulos, S., & Michailidis, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.154 · Cited by 180
Raster angle mechanics in fused deposition modelling
Huang, B., & Singamneni, S. (2014) · Journal of Composite Materials · doi:10.1177/0021998313519153 · Cited by 163
Lee, W.-C., Wei, C.-C., & Chung, S.-C. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.05.004 · Cited by 160
Uddin, M., Sidek, M. F. R., Faizal, M. A., Ghomashchi, R., & Pramanik, A. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036713 · Cited by 156
Naghieh, S., Karamooz-Ravari, M. R., Badrossamay, M., Foroozmehr, E., & Kadkhodaei, M. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.01.031 · Cited by 148
Chen, H., Yang, X., Chen, L., Wang, Y., & Sun, Y. (2016) · Scientific Reports · doi:10.1038/srep19207 · Cited by 123
Deposition Strategies and Resulting Part Stiffnesses in Fused Deposition Modeling
Kulkarni, P., & Dutta, D. (1999) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2830582 · Cited by 115
Fracture modes under uniaxial compression in hydroxyapatite scaffolds fabricated by robocasting
Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31272 · Cited by 106
Arbeiter, F. J., Spoerk, M., Wiener, J., Gosch, A., & Pinter, G. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.01.002 · Cited by 105
Fatigue Performance of ABS Specimens Obtained by Fused Filament Fabrication
Domingo-Espin, M., Travieso-Rodriguez, J. A., Jerez‐Mesa, R., & Llumà, J. (2018) · Materials · doi:10.3390/ma11122521 · Cited by 105
Hossain, M. S., Espalin, D., Ramos-Grez, J. A., Perez, M. A., & Wicker, R. B. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028538 · Cited by 100
Flexural fatigue properties of polycarbonate fused-deposition modelling specimens
Puigoriol-Forcada, J. M., Alsina, A., Salazar-Martín, A. G., Gómez-Gras, G., & Pérez, M. A. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.018 · Cited by 88
3D-Printing of Redox Flow Batteries for Energy Storage: A Rapid Prototype Laboratory Cell
Arenas, L. F., Walsh, F. C., & de León, C. P. (2015) · ECS Journal of Solid State Science and Technology · doi:10.1149/2.0141504jss · Cited by 85
Griffiths, C. A., Howarth, J., Almeida-Rowbotham, G. D., & Rees, A. (2016) · Procedia CIRP · doi:10.1016/j.procir.2015.07.024 · Cited by 76
Brischetto, S., Ferro, C. G., Torre, R., & Maggiore, P. (2018) · Curved and Layered Structures · doi:10.1515/cls-2018-0007 · Cited by 75
Post-processing of FDM parts to improve surface and thermal properties
Nguyen, T. K., & Lee, B. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2016-0207 · Cited by 67
Messimer, S. L., Pereira, T. R., Patterson, A. E., Lubna, M., & Drozda, F. O. (2019) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp3010006 · Cited by 62
Evaluation of stiffness and strength in fused deposition sandwich specimens
Magalhães, L. C., Volpato, N., & Luersen, M. A. (2013) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-013-0111-1 · Cited by 53
Experimental testing and numerical analysis of FDM multi-cell inserts and hybrid structures
Tabacu, Ş., & DUCU, C. M. (2018) · Thin-Walled Structures · doi:10.1016/j.tws.2018.04.009 · Cited by 50
Jo, K.-H., Jeong, Y.-S., Lee, J., & Lee, S. (2016) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-016-0180-z · Cited by 37
Flexural elasticity of woodpile lattice beams
Cuan‐Urquizo, E., & Bhaskar, A. (2017) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2017.09.008 · Cited by 35
Self-citationComputational design of curvilinear bone scaffolds fabricated via direct ink writing
Roberge, J., & Norato, J. A. (2017) · Computer-Aided Design · doi:10.1016/j.cad.2017.09.003 · Cited by 29
Lara-Padilla, H., Mendoza-Buenrostro, C. C., Cárdenas, D., Rodríguez‐García, A., & Rodriguez, C. A. (2017) · Materials · doi:10.3390/ma10060640 · Cited by 24
Self-citationMechanical characterisation of additively manufactured material having lattice microstructure
Cuan‐Urquizo, E., Yang, S., & Bhaskar, A. (2015) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/74/1/012004 · Cited by 23
Self-citationMohamed, O. A., Masood, S. H., & Bhowmik, J. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/149/1/012122 · Cited by 11
Cited by
Fused deposition modelling: Current status, methodology, applications and future prospects
Cano-Vicent, A., Tambuwala, M. M., Hassan, S. S., Barh, D., Aljabali, A. A. A., Birkett, M., Arjunan, A., & Serrano-Aroca, Á. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102378 · Cited by 509
Khorsandi, D., Fahimipour, A., Abasian, P., Saber, S. S., Seyedi, M., Ghanavati, S., Ahmad, A., De Stephanis, A. A., Taghavinezhaddilami, F., Leonova, A., et al. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.12.044 · Cited by 428
Optimisation of Strength Properties of FDM Printed Parts—A Critical Review
Syrlybayev, D., Zharylkassyn, B., Seisekulova, A., Akhmetov, M., Perveen, A., & Talamona, D. (2021) · Polymers · doi:10.3390/polym13101587 · Cited by 352
Ahmed, R., Dola, I. S., Ahmed, S., Rahman, M. M., Shanto, T. A., & Taylor, R. (2026) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-026-18078-6 · Cited by 6
Metadata
- Authors
- Cuan-Urquizo, E., Barocio, E., Tejada-Ortigoza, V., Pipes, R. B., Rodriguez, C. A., & Roman-Flores, A.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2019-03-18
- Volume
- 12
- Issue
- 6
- Pages
- 895
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2922233693
- Cited by
- 288
- References
- 81
- FWCI
- 14.54
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.