The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
Circular Economy of Construction and Demolition Waste: A Literature Review on Lessons, Challenges, and Benefits
Open accessAbstract
Conventionally, in a linear economy, C&D (Construction and Demolition) waste was considered as zero value materials, and, as a result of that, most C&D waste materials ended up in landfills. In recent years, with the increase in the awareness around sustainability and resource management, various countries have started to explore new models to minimize the use of limited resources which are currently overused, mismanaged, or quickly depleting. In this regard, the implementation of CE (Circular Economy) has emerged as a potential model to minimize the negative impact of C&D wastes on the environment. However, there are some challenges hindering a full transition to CE in the construction and demolition sectors. Therefore, this review paper aims to critically scrutinize different aspects of C&D waste and how CE can be integrated into construction projects. Reviewing of the literature revealed that the barriers in the implementation of CE in C&D waste sectors fall in five main domains, namely legal, technical, social, behavioral, and economic aspects. In this context, it was found that policy and governance, permits and specifications, technological limitation, quality and performance, knowledge and information, and, finally, the costs associated with the implementation of CE model at the early stage are the main barriers. In addition to these, from the contractors’ perspective, C&D waste dismantling, segregation, and on-site sorting, transportation, and local recovery processes are the main challenges at the start point for small-scale companies. To address the abovementioned challenges, and also to minimize the ambiguity of resulting outcomes by implementing CE in C&D waste sectors, there is an urgent need to introduce a global framework and a practicable pathway to allow companies to implement such models, regardless of their scale and location. Additionally, in this paper, recommendations on the direction for areas of future studies for a reduction in the environmental impacts have been provided. To structure an effective model approach, the future direction should be more focused on dismantling practices, hazardous material handling, quality control on waste acceptance, and material recovery processes, as well as a incentivization mechanism to promote ecological, economic, and social benefits of the CE for C&D sectors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Building Information Modeling (BIM): Trends, Benefits, Risks, and Challenges for the AEC Industry
Azhar, S. (2011) · Leadership and Management in Engineering · doi:10.1061/(asce)lm.1943-5630.0000127 · Cited by 2,192
The Circular Economy: A New Development Strategy in China
Yuan, Z., Bi, J., & Moriguichi, Y. (2006) · Journal of Industrial Ecology · doi:10.1162/108819806775545321 · Cited by 1,175
Construction and demolition waste management in China through the 3R principle
Huang, B., Wang, X., Kua, H., Geng, Y., Bleischwitz, R., & Ren, J. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.029 · Cited by 1,047
Geng, Y., & Doberstein, B. (2008) · International Journal of Sustainable Development & World Ecology · doi:10.3843/susdev.15.3:6 · Cited by 855
Construction and demolition waste best management practice in Europe
Gálvez-Martos, J.-L., Styles, D., Schoenberger, H., & Zeschmar-Lahl, B. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.016 · Cited by 816
Ghisellini, P., Ripa, M., & Ulgiati, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.207 · Cited by 706
Yeheyis, M., Hewage, K., Alam, M. S., Eskicioglu, C., & Sadiq, R. (2013) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-012-0481-6 · Cited by 640
Hossain, M. U., Ng, S. T., Antwi-Afari, P., & Amor, B. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109948 · Cited by 614
Effects of waste PET bottles aggregate on the properties of concrete
Choi, Y.-W., Moon, D.-J., Chung, J.-S., & Cho, S.-K. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.014 · Cited by 586
López Ruiz, L. A., Roca Ramón, X., & Gassó Domingo, S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119238 · Cited by 538
A review on current situation and challenges of construction and demolition waste management
Menegaki, M., & Damigos, D. (2018) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2018.02.010 · Cited by 512
The CO2 uptake of concrete in a 100 year perspective
Pade, C., & Guimaraes, M. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.06.009 · Cited by 488
On the mechanical properties of concrete containing waste PET particles
Rahmani, E., Dehestani, M., Beygi, M. H. A., Allahyari, H., & Nikbin, I. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.06.041 · Cited by 458
On-site sorting of construction and demolition waste in Hong Kong
Poon, C. S., Yu, A. T. W., & Ng, L. H. (2001) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(01)00052-0 · Cited by 431
An empirical study of construction and demolition waste generation and implication of recycling
Islam, R., Nazifa, T. H., Yuniarto, A., Shanawaz Uddin, A. S. M., Salmiati, S., & Shahid, S. (2019) · Waste Management · doi:10.1016/j.wasman.2019.05.049 · Cited by 404
Schwarz, N., Cam, H., & Neithalath, N. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.02.001 · Cited by 397
High strength concrete containing natural pozzolan and silica fume
Shannag, M. J. (2000) · Cement and Concrete Composites · doi:10.1016/s0958-9465(00)00037-8 · Cited by 395
An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete
Akçaözoğlu, S., Atiş, C. D., & Akçaözoğlu, K. (2010) · Waste Management · doi:10.1016/j.wasman.2009.09.033 · Cited by 385
Marzouk, M., & Azab, S. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.10.015 · Cited by 383
A Spanish model for quantification and management of construction waste
Solís-Guzmán, J., Marrero, M., Montes-Delgado, M. V., & Ramírez-de-Arellano, A. (2009) · Waste Management · doi:10.1016/j.wasman.2009.05.009 · Cited by 359
A framework for understanding waste management studies in construction
Lu, W., & Yuan, H. (2011) · Waste Management · doi:10.1016/j.wasman.2011.01.018 · Cited by 353
Sustainable waste management systems
Seadon, J. K. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.07.009 · Cited by 339
Bilal, M., Khan, K. I. A., Thaheem, M. J., & Nasir, A. R. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123250 · Cited by 286
Ajayi, S. O., Oyedele, L. O., Bilal, M., Akinade, O. O., Alaka, H. A., Owolabi, H. A., & Kadiri, K. O. (2015) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2015.06.001 · Cited by 282
Esa, M. R., Halog, A., & Rigamonti, L. (2017) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-016-0516-x · Cited by 275
Begum, R. A., Siwar, C., Pereira, J. J., & Jaafar, A. H. (2006) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2006.01.004 · Cited by 274
Antiohos, S. K., Papadakis, V. G., & Tsimas, S. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.04.001 · Cited by 272
Autogenous Shrinkage of Concrete
Tazawa, E.-I. (1999) · CRC Press eBooks · doi:10.1201/9781482272123 · Cited by 269
Influence of rice husk ash on strength and permeability of ultra-high performance concrete
Huang, H., Gao, X., Wang, H., & Ye, H. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.05.155 · Cited by 269
Akinade, O. O., Oyedele, L. O., Ajayi, S. O., Bilal, M., Alaka, H. A., Owolabi, H. A., & Arawomo, O. O. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.01.022 · Cited by 260
Potential of CO 2 sequestration through construction and demolition (C&D) waste—An overview
Kaliyavaradhan, S. K., & Ling, T.-C. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.05.014 · Cited by 255
Economic comparison of concrete recycling: A case study approach
Tam, V. W. Y. (2008) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2007.12.001 · Cited by 254
Life cycle assessment of construction and demolition waste management
Butera, S., Christensen, T. H., & Astrup, T. F. (2015) · Waste Management · doi:10.1016/j.wasman.2015.07.011 · Cited by 240
Stephan, A., & Athanassiadis, A. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.022 · Cited by 222
Won, J., & Cheng, J. C. P. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.02.002 · Cited by 221
Recycling of waste glass as aggregate in cement-based materials
Harrison, E., Berenjian, A., & Seifan, M. (2020) · Environmental Science and Ecotechnology · doi:10.1016/j.ese.2020.100064 · Cited by 220
Self-citationManagement of construction waste in public housing projects in Hong Kong
Poon, C. S., Yu, A. T. W., Wong, S. W., & Cheung, E. (2004) · Construction Management and Economics · doi:10.1080/0144619042000213292 · Cited by 218
Characterization of ceramic waste aggregate concrete
Awoyera, P. O., Ndambuki, J. M., Akinmusuru, J. O., & Omole, D. O. (2018) · HBRC Journal · doi:10.1016/j.hbrcj.2016.11.003 · Cited by 205
The built environment and the ecosphere: a global perspective
Rees, W. E. (1999) · Building Research & Information · doi:10.1080/096132199369336 · Cited by 201
Anastasiades, K., Blom, J., Buyle, M., & Audenaert, A. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109522 · Cited by 191
A review on durability of nano-SiO2 and basalt fiber modified recycled aggregate concrete
Zheng, Y., Zhuo, J., & Zhang, P. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124659 · Cited by 190
Strategies for minimizing construction and demolition wastes in Malaysia
Esa, M. R., Halog, A., & Rigamonti, L. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.12.014 · Cited by 186
Durability of concrete incorporating high-volume of low-calcium (ASTM Class F) fly ash
Malhotra, V. M. (1990) · Cement and Concrete Composites · doi:10.1016/0958-9465(90)90006-j · Cited by 181
Production of recycled sand from construction and demolition waste
Ulsen, C., Kahn, H., Hawlitschek, G., Masini, E. A., Angulo, S. C., & John, V. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.004 · Cited by 162
Shooshtarian, S., Caldera, S., Maqsood, T., & Ryley, T. J. (2020) · Recycling · doi:10.3390/recycling5040031 · Cited by 160
From waste to sustainable materials management: Three case studies of the transition journey
Silva, A., Rosano, M., Stocker, L., & Gorissen, L. (2017) · Waste Management · doi:10.1016/j.wasman.2016.11.038 · Cited by 152
Lederer, J., Gassner, A., Kleemann, F., & Fellner, J. (2020) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2020.104942 · Cited by 150
Xu, J., Shi, Y., Xie, Y., & Zhao, S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.158 · Cited by 147
Khahro, S. H., Kumar, D., Siddiqui, F. A., et al. (2021) · Sustainability · doi:10.3390/su13073675 · Cited by 133
Seifan, M., Mendoza, S., & Berenjian, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119121 · Cited by 113
Self-citationZhang, P., Sha, D., Li, Q., Zhao, S., & Ling, Y. (2021) · Nanomaterials · doi:10.3390/nano11051296 · Cited by 113
Andrade, J. J. D. O., Possan, E., Squiavon, J. Z., & Ortolan, T. L. P. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.089 · Cited by 98
Managing construction waste on‐site through system dynamics modelling: the case of Hong Kong
Hao, J. L., Hill, M. J., & Shen, L. (2008) · Engineering Construction & Architectural Management · doi:10.1108/09699980810852646 · Cited by 93
A conceptual foundation for effective construction and demolition waste management
Kabirifar, K., Mojtahedi, M., Wang, C., & Tam, V. W. Y. (2020) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2020.100019 · Cited by 89
Rethinking the Construction Industry Under the Circular Economy: Principles and Case Studies
Mangialardo, A., & Micelli, E. (2018) · Green energy and technology · doi:10.1007/978-3-319-75774-2_23 · Cited by 79
Quality and quantity of construction and demolition waste in Tehran
Asgari, A., Ghorbanian, T., Yousefi, N., Dadashzadeh, D., Khalili, F., Bagheri, A., Raei, M., & Mahvi, A. H. (2017) · Journal of Environmental Health Science and Engineering · doi:10.1186/s40201-017-0276-0 · Cited by 78
Corsten, M., Worrell, E., Rouw, M., & van Duin, A. (2013) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2013.04.002 · Cited by 77
Recycling of Coal Ash in Concrete as a Partial Cementitious Resource
Mangi, S. A., Ibrahim, M. H. W., Jamaluddin, N., Arshad, M. F., & Mudjanarko, S. W. (2019) · Resources · doi:10.3390/resources8020099 · Cited by 69
Construction and Demolition Waste Management Using BIM Technology
Cheng, J. C. P., Won, J., & Das, M. (2015) · Rare & Special e-Zone (The Hong Kong University of Science and Technology) · Cited by 54
Use of scrap tires in cement production and their impact on nitrogen and sulfur oxides emissions
Nakomčić-Smaragdakis, B., Čepić, Z. M., Senk, N., Dorić, J., & Radovanović, L. (2016) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2013.787473 · Cited by 37
SUSTAINABLE CONSTRUCTION WASTE MANAGEMENT IN MALAYSIA: A CONTRACTOR’S PERSPECTIVE
Papargyropoulou, E. (., Preece, C. (., Padfield, R., et al. (2011) · Research Repository (Delft University of Technology) · Cited by 17
Cited by
AlJaber, A., Martinez-Vazquez, P., & Baniotopoulos, C. (2023) · Buildings · doi:10.3390/buildings13112778 · Cited by 130
Circular economy business model in the construction industry: a systematic review
Jayakodi, S., Senaratne, S., & Perera, S. (2024) · Buildings · doi:10.3390/buildings14020379 · Cited by 33
Architects as catalysts of reuse in construction
Nicholson, V., & Miatto, A. (2024) · Nature Cities · doi:10.1038/s44284-024-00042-8 · Cited by 12
Metadata
- Authors
- Purchase, C. K., Al Zulayq, D. M., O’Brien, B. T., Kowalewski, M. J., Berenjian, A., Tarighaleslami, A. H., & Seifan, M.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2021-12-23
- Volume
- 15
- Issue
- 1
- Pages
- 76
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W4200402773
- Cited by
- 357
- References
- 61
- FWCI
- 18.95
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.