CoChat

Cutting-Edge Perovskite-Based Flexible Pressure Sensors Made Possible by Piezoelectric Innovation

Open access
Naz, Adeela, Meng, Yuan, Luo, Jingjing, Khan, Imtiaz Ahmad, Abbas, Rimsha, Yu, Suzhu, Wei, Jun · 2024 · Materials

The DOI matches its Crossref record; 158 of the 158 references it cites were found in a registry or an index.

Abstract

In the area of flexible electronics, pressure sensors are a widely utilized variety of flexible electronics that are both indispensable and prevalent. The importance of pressure sensors in various fields is currently increasing, leading to the exploration of materials with unique structural and piezoelectric properties. Perovskite-based materials are ideal for use as flexible pressure sensors (FPSs) due to their flexibility, chemical composition, strain tolerance, high piezoelectric and piezoresistive properties, and potential integration with other technologies. This article presents a comprehensive study of perovskite-based materials used in FPSs and discusses their components, performance, and applications in detecting human movement, electronic skin, and wireless monitoring. This work also discusses challenges like material instability, durability, and toxicity, the limited widespread application due to environmental factors and toxicity concerns, and complex fabrication and future directions for perovskite-based FPSs, providing valuable insights for researchers in structural health monitoring, physical health monitoring, and industrial applications.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/ma17174196

Cites

158 of 158 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 9 Assessment of techniques to fabricate FPSs [147,148].
Figure 9 Assessment of techniques to fabricate FPSs [147,148].CC BY · PubMed Central
Figure 1 A comprehensive view of the current research on flexible pressure sensors.
Figure 1 A comprehensive view of the current research on flexible pressure sensors.CC BY · PubMed Central
Figure 2 Schematic illustration of four common transduction mechanisms: (a) piezoresistive, (b) capacitive, (c) piezoelectric and (d) triboelectric.
Figure 2 Schematic illustration of four common transduction mechanisms: (a) piezoresistive, (b) capacitive, (c) piezoelectric and (d) triboelectric.CC BY · PubMed Central
Figure 3 Presentation of the (a) d33 and Curie temperature of PZT-based, (b) lead-based, (c) and lead-free ceramics, sourced from several publications. (Reprinted with the permission from [127]. copyright 2015, American Chemical Society.) (d) Graph showing the d33* for BFO—xBTO (x = 0.30 and 0.33), analysis of temperature stability, and the d33* of lead-free BFBT ceramics. (Reprinted with permission from [111]. copyright 2023, Materials Science & Technology).
Figure 3 Presentation of the (a) d33 and Curie temperature of PZT-based, (b) lead-based, (c) and lead-free ceramics, sourced from several publications. (Reprinted with the permission from [127]. copyright 2015, American Chemical Society.) (d) Graph showing the d33* for BFO—xBTO (x = 0.30 and 0.33), analysis of temperature stability, and the d33* of lead-free BFBT ceramics. (Reprinted with permission from [111]. copyright 2023, Materials Science & Technology).CC BY · PubMed Central
Figure 4 (a) Diagram showing the steps involved in creating PVDF-BTO electrospun fibers using electrospinning. (b) Diagrammatic representation of the flexible pressure sensor assembly with single- and double-sided microstructures. (c) Comparing the sensitivity of sensors using fibers with varying BTO ratios and double-layer microcylinders (DLC) as a dielectric layer and (d) with DLC-BTO fibers at different pressures of 0–5, 5–7.5, and 7.5–40 kPa. (Reprinted with permission from [128]. copyright 2022, Measurement). Fully integrating nanometer-thick perovskite with a mechanoluminescence (ML) device results in a robust, flexible, and self-powered mechanoluminescent perovskite pressure sensor. (e) Current reaction to pressures applied to the sensor. (f) Time-varying sensor response. (g) The bending for ten cycles. (h) Sensor response as a result of cyclic bending tests; an enhancement of the sensor signal at a 200–250 s range is displayed in the inset. (Reprinted with the permission from [129]. copyright 2020, ACS Applied Nano Materials).
Figure 4 (a) Diagram showing the steps involved in creating PVDF-BTO electrospun fibers using electrospinning. (b) Diagrammatic representation of the flexible pressure sensor assembly with single- and double-sided microstructures. (c) Comparing the sensitivity of sensors using fibers with varying BTO ratios and double-layer microcylinders (DLC) as a dielectric layer and (d) with DLC-BTO fibers at different pressures of 0–5, 5–7.5, and 7.5–40 kPa. (Reprinted with permission from [128]. copyright 2022, Measurement). Fully integrating nanometer-thick perovskite with a mechanoluminescence (ML) device results in a robust, flexible, and self-powered mechanoluminescent perovskite pressure sensor. (e) Current reaction to pressures applied to the sensor. (f) Time-varying sensor response. (g) The bending for ten cycles. (h) Sensor response as a result of cyclic bending tests; an enhancement of the sensor signal at a 200–250 s range is displayed in the inset. (Reprinted with the permission from [129]. copyright 2020, ACS Applied Nano Materials).CC BY · PubMed Central
Figure 5 (a) Illustration device structure of FPPSs; (b,c) SbNSs/BTO/PVDF-TrFE (SBP) composite-fiber short-circuit currents, voltages, and dynamic force compressive pressures at 2 Hz; (d) Output currents vs. voltages according to the applied pressure; (e) Output stability of FPPS-SbNSs doped in 2Hz and BTO doped in 128 kPa. (Reprinted with permission from [130]. copyright 2023, Advanced Electronic Materials.) (f) Sensor view with PET film by using screen-printed technquie. (g,h) Current reactions to piezoelectric and pyroelectric stimulation following AC poling with a field amplitude that compensates for the pyroelectric or piezoelectric responses. (Reprinted with permission from [131]. copyright 2020, ACS Applied Materials and Interfaces).
Figure 5 (a) Illustration device structure of FPPSs; (b,c) SbNSs/BTO/PVDF-TrFE (SBP) composite-fiber short-circuit currents, voltages, and dynamic force compressive pressures at 2 Hz; (d) Output currents vs. voltages according to the applied pressure; (e) Output stability of FPPS-SbNSs doped in 2Hz and BTO doped in 128 kPa. (Reprinted with permission from [130]. copyright 2023, Advanced Electronic Materials.) (f) Sensor view with PET film by using screen-printed technquie. (g,h) Current reactions to piezoelectric and pyroelectric stimulation following AC poling with a field amplitude that compensates for the pyroelectric or piezoelectric responses. (Reprinted with permission from [131]. copyright 2020, ACS Applied Materials and Interfaces).CC BY · PubMed Central
Figure 6 (a) CsPbI3/rGO/P(VDF-TrFE) film precursor solution preparation. (b) Fabrication of a flexible sensor. (c) CsPbI3/rGO/P(VDF-TrFE) flexible pressure sensor output currents at varying impact forces. (d) Pressure sensor stability at different temperatures after 1 h. (e) Pressure sensor stability in water, sodium hydroxide, and sulfuric acid after 48 h. (Reprinted with the permission from [132] copyright 2022. Physica B: Condensed Matter). (f) Diagram of a PVDF/rGO/BTO-based pressure sensor for flexible electronic skin (FES), displaying its multi-layered structure and characteristics. (g) The FES under curling conditions. (h) The sensitivity of the FES. (i) The response time. (Reprinted with permission from [133]. copyright 2021, Organic Electronics).
Figure 6 (a) CsPbI3/rGO/P(VDF-TrFE) film precursor solution preparation. (b) Fabrication of a flexible sensor. (c) CsPbI3/rGO/P(VDF-TrFE) flexible pressure sensor output currents at varying impact forces. (d) Pressure sensor stability at different temperatures after 1 h. (e) Pressure sensor stability in water, sodium hydroxide, and sulfuric acid after 48 h. (Reprinted with the permission from [132] copyright 2022. Physica B: Condensed Matter). (f) Diagram of a PVDF/rGO/BTO-based pressure sensor for flexible electronic skin (FES), displaying its multi-layered structure and characteristics. (g) The FES under curling conditions. (h) The sensitivity of the FES. (i) The response time. (Reprinted with permission from [133]. copyright 2021, Organic Electronics).CC BY · PubMed Central
Figure 7 (a) Poly(vinylidene-hexafluoropropylene) P(VDF-HFP) composite-fiber preparation technology. (b) Sensitivity of multilayered composite fibers. (c) Three-layer gradient composite film output voltage under different forces. (d) Different angles of bending. (e,f) Three-layer gradient composite film output voltage recovery time and response time. (g) Examination the response time of different materials from other studies. (Reprinted with permission from [134]. copyright 2023, Diamond and Related Materials).
Figure 7 (a) Poly(vinylidene-hexafluoropropylene) P(VDF-HFP) composite-fiber preparation technology. (b) Sensitivity of multilayered composite fibers. (c) Three-layer gradient composite film output voltage under different forces. (d) Different angles of bending. (e,f) Three-layer gradient composite film output voltage recovery time and response time. (g) Examination the response time of different materials from other studies. (Reprinted with permission from [134]. copyright 2023, Diamond and Related Materials).CC BY · PubMed Central
Figure 8 Schematic presentation of printing techniques. (a) Direct ink writing. (b) Ink jet printing. (c) Screen printing. (d) Aerosol jet printing. (e) Spray coating process. (f) Spin coating process. (g) Working principle of the magnetron-sputtering deposition process. (h) Process of photolithography. (i) Laser beam machining setup.
Figure 8 Schematic presentation of printing techniques. (a) Direct ink writing. (b) Ink jet printing. (c) Screen printing. (d) Aerosol jet printing. (e) Spray coating process. (f) Spin coating process. (g) Working principle of the magnetron-sputtering deposition process. (h) Process of photolithography. (i) Laser beam machining setup.CC BY · PubMed Central
Figure 10 Flexible SSTO-nanofiber-based sensors are used to measure the following: (a) notebook bending; (b) finger bending, (c) wrist bending, (d) the radial pulse, (e) throat swallowing, (f) nose breathing. (Reprinted with permission from [151]. copyright 2021, ACS Applied Materials & Interfaces). (g) The PDA@BTO/PVDF piezoelectric flexible pressure sensor integrated into shoes, and the output voltages produced by (h) jumping, (i) walking, and (j) running. (Reprinted with permission from [152]. copyright 2020, Sensors and Actuators A: Physical). The application of a PU-BTO-rGO flexible pressure sensor for calculating motion by (k) touching with a finger, (l) wrist bending, and (m) elbow bending. (Reprinted with permission from [153]. copyright 2023, Diamond and Related Materials).
Figure 10 Flexible SSTO-nanofiber-based sensors are used to measure the following: (a) notebook bending; (b) finger bending, (c) wrist bending, (d) the radial pulse, (e) throat swallowing, (f) nose breathing. (Reprinted with permission from [151]. copyright 2021, ACS Applied Materials & Interfaces). (g) The PDA@BTO/PVDF piezoelectric flexible pressure sensor integrated into shoes, and the output voltages produced by (h) jumping, (i) walking, and (j) running. (Reprinted with permission from [152]. copyright 2020, Sensors and Actuators A: Physical). The application of a PU-BTO-rGO flexible pressure sensor for calculating motion by (k) touching with a finger, (l) wrist bending, and (m) elbow bending. (Reprinted with permission from [153]. copyright 2023, Diamond and Related Materials).CC BY · PubMed Central
Figure 11 The use of the BTO/MXene/PVDF-TrFE flexible pressure sensor to detect human motion monitoring of the (a–f) index-finger release voltage, finger flex–release, elbow flex–release, walking, running, and jumping, respectively. (Reprinted with permission from [135] Copyright 2023, Materials Chemistry C).
Figure 11 The use of the BTO/MXene/PVDF-TrFE flexible pressure sensor to detect human motion monitoring of the (a–f) index-finger release voltage, finger flex–release, elbow flex–release, walking, running, and jumping, respectively. (Reprinted with permission from [135] Copyright 2023, Materials Chemistry C).CC BY · PubMed Central
Figure 12 Applications of intelligent sensing: (a) System flow recognition. (b) Homemade circuit-system operating schematic. (c,d) Software interface, the wireless transmitted module, and circuit module. (e) Collection of the signal in the software interface. (f) Assessment of storage reliability. (Reprinted with from permission [155]. copyright 2023, Nano Research).
Figure 12 Applications of intelligent sensing: (a) System flow recognition. (b) Homemade circuit-system operating schematic. (c,d) Software interface, the wireless transmitted module, and circuit module. (e) Collection of the signal in the software interface. (f) Assessment of storage reliability. (Reprinted with from permission [155]. copyright 2023, Nano Research).CC BY · PubMed Central
Figure 13 (a) The experimental configuration for the EC10S + PNy 11 TES human activity measurement. (b) The sensor sensitivity. (c) Sensing performance such as twisting, tapping, bending, and folding, and (d,e) When the sensor serves as a wrist band or finger ring. (f) The intensity of sound when the sensor is attached to the neckband. (g,h) Detecting and distinguishing between motions such as kicking, walking, and jumping. (i) Identifying the sleeping posture when the sensor is fixed to the edge of bed. (j) Applications for smart chairs in healthcare. (Reprinted with permission from [157]. copyright 2023, Nano Energy).
Figure 13 (a) The experimental configuration for the EC10S + PNy 11 TES human activity measurement. (b) The sensor sensitivity. (c) Sensing performance such as twisting, tapping, bending, and folding, and (d,e) When the sensor serves as a wrist band or finger ring. (f) The intensity of sound when the sensor is attached to the neckband. (g,h) Detecting and distinguishing between motions such as kicking, walking, and jumping. (i) Identifying the sleeping posture when the sensor is fixed to the edge of bed. (j) Applications for smart chairs in healthcare. (Reprinted with permission from [157]. copyright 2023, Nano Energy).CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 15

Metadata

Authors
Naz, A., Meng, Y., Luo, J., Khan, I. A., Abbas, R., Yu, S., & Wei, J.
Affiliations
Harbin Institute of Technology (CN)
Corresponding author
  • Yu, Suzhu
  • Wei, Jun
Venue
Materials
Publisher
MDPI AG
Published
2024-08-24
Volume
17
Issue
17
Pages
4196
ISSN
1996-1944 (ISSN-L)
OpenAlex
W4401894181
Cited by
14
References
158
Citations by year
2026: 3 · 2025: 10 · 2024: 1
FWCI
0.50
Type
journal article
Language
en
Open access
Locations
  • Materials (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Funders
  • Shenzhen Science and Technology Program (KQTD20200820113045083, ZDSYS20190902093220279, JCYJ20220818102403007, DD11409017)
  • Shenzhen Research Fund for Returned Scholars (KQTD20200820113045083, ZDSYS20190902093220279, JCYJ20220818102403007, DD11409017)
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
  • Physical Sciences › Materials Science › Materials Chemistry › Ferroelectric and Piezoelectric Materials
Keywords
perovskite, flexible pressure sensors, piezoelectric properties, piezoresistivity, flexible electronics, electronic skin, human motion detection, wireless health monitoring, structural health monitoring, material stability, toxicity

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.