Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application
Open accessThe DOI matches its Crossref record; 144 of the 151 references it cites were found in a registry or an index; 34 of the 69 sources its claims cite were checked for support.
Abstract
This review describes some commercially available stimuli-responsive polymers of natural and synthetic origin, and their applications in drug delivery and textiles. The polymers of natural origin such as chitosan, cellulose, albumin, and gelatin are found to show both thermo-responsive and pH-responsive properties and these features of the biopolymers impart sensitivity to act differently under different temperatures and pH conditions. The stimuli-responsive characters of these natural polymers have been discussed in the review, and their respective applications in drug delivery and textile especially for textile-based transdermal therapy have been emphasized. Some practically important thermo-responsive polymers such as pluronic F127 (PF127) and poly(N-isopropylacrylamide) (pNIPAAm) of synthetic origin have been discussed in the review and they are of great importance commercially because of their in situ gel formation capacity. Some pH-responsive synthetic polymers have been discussed depending on their surface charge, and their drug delivery and textile applications have been discussed in this review. The selected stimuli-responsive polymers of synthetic origin are commercially available. Above all, the applications of bio-based or synthetic stimuli-responsive polymers in textile-based transdermal therapy are given special regard apart from their general drug delivery applications. A special insight has been given for stimuli-responsive hydrogel drug delivery systems for textile-based transdermal therapy, which is critical for the treatment of skin disease atopic dermatitis.
Overview
CoChat Summary
## TL;DR
This review surveys commercially available stimuli-responsive polymers of natural and synthetic origin and summarizes their uses in drug delivery and textile-based transdermal therapy. It emphasizes that natural polymers such as chitosan, cellulose, albumin, and gelatin can be both thermo- and pH-responsive, while synthetic systems like PF127 and pNIPAAm are especially important for in situ gel formation.
## Key findings
- Natural polymers highlighted in the review — chitosan, cellulose, albumin, and gelatin — are described as showing both thermo-responsive and pH-responsive behavior, making them useful for drug delivery and textile-based transdermal therapy.
- Synthetic thermo-responsive polymers PF127 and pNIPAAm are described as widely used because they can form gels near body temperature, especially around 37 °C.
- The review states that PF127-based thermo-responsive hydrogels have been applied in textile-based transdermal therapy for atopic dermatitis, including systems loaded with traditional Chinese medicine and moisture.
- pH-responsive polymers such as PEG, PAA, PDMAEMA, and PDEAEMA are presented as useful for oral, colon-targeted, and transdermal drug delivery, with applications shaped by whether they swell in acidic or basic conditions.
## Methods
- Not an experimental study; this is a narrative review of stimuli-responsive polymers and their reported biomedical applications.
- The paper compiles examples from the literature on natural and synthetic polymers, including drug delivery and textile applications.
- The main analysis is descriptive: it categorizes polymers by stimulus response (temperature, pH, sometimes light/redox) and summarizes reported uses and performance claims from prior studies.
## Limitations
- The paper states that textile-based transdermal therapy needs further and more extensive research because skin pH and temperature vary with physiological state.
- The paper states that stability on skin is a major hurdle, noting that some thermo-responsive hydrogels, such as PF127, can disintegrate under acidic conditions and that skin pH around 5.5 may destabilize PF127-based hydrogel systems.
- Evident from the text: the review is largely a compilation of examples and does not report new experiments, datasets, or quantitative head-to-head comparisons of the polymers discussed.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
24 Valid · 1 Not valid · 12 Not checked · 7 Own results and interpretations
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“The recent focus on functional polymers mostly centers around stimuli-responsive polymers and these polymers have attracted great attention since these can show sol-gel transitions in response to external triggers like temperature, pH, and light [20,21].”
§ Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application > 1. Introduction Hydrogels are three-dimensional polymeric networks made up of the same or different hydrophilic polymers and contain large amounts of water in their structure [1,2,3]. The polymeric backbone with hydrophilic functional groups hold a large amount of water in the structure and crosslinking network formed by polymeric chains, which resists its dissolution in water [4,5]. Hydrogels exhibit the ability to swell and possess some degree of flexibilities, which are very similar to the natural tissue due to their large water content. The compactness of hydrogels in aqueous media is maintained by physical cross-linking (e.g., entanglements, crystallites) and, also, chemical cross-linking [6,7]. Hydrogels widely vary in their composition, chemical structure, biodegradability, and various physio-chemical properties such as spectral and mechanical properties, pH stability, and, depending on all such factors, their biological function and performances vary in multiple dimensions [8,9,10]. Hydrogels resemble some physical properties of living tissues such as high-water content, compactness, and low interfacial tension with aqueous media, and those properties of hydrogels impart their great applicability in the bio-medical field, especially for drug delivery [11,12,13,14]. The biomedical applications of hydrogels including drug delivery, tissue engineering, clinical bandages, and biosensors come in the form of film/film forming systems, micro/nano-sphere, matrix, nanoparticles, and nanocomposites depending on the chemical composition and processing parameters of hydrogels [15,16,17,18]. The suitable use of hydrogels for delivering drugs can be upgraded by modifying their transport properties for drugs and also by chemical modification [4,19]. The recent focus on functional polymers mostly centers around stimuli-responsive polymers and these polymers have attracted great attention since these can show sol-gel transitions in response to external triggers like temperature, pH, and light [20,21]. Moreover, the physical changes in stimuli-responsive polymers are reversible and they are capable of returning to their initial state after the trigger is removed [21]. In recent years, there has been a remarkable growth in the development of stimuli-responsive polymer-based drug delivery systems with sustained and controlled drug release properties [22,23]. The important feature of stimuli-responsive polymers is the critical solution temperature (CST), which can be defined as a critical temperature at which the polymeric solution shows a phase separation, which moves from the isotropic state to the anisotropic state [21]. The polymer with lower critical solution temperature (LCST) shows the solution phase below CST and becomes insoluble or forms hydrogels over CST with heating [20]. The LSCT can be defined as a critical temperature at which the polymeric solution shows a phase separation, which moves from the isotropic state to the anisotropic state [21]. The polymers with LCST are mostly used for developing drug delivery systems [22]. Stimuli-responsive gelling materials constructed from natural and synthetic polymers are successfully used to develop drug delivery systems and regenerative medicine products because of their triggered actions in response to external stimuli [24,25,26]. The hydrogels made of stimuli-responsive polymers can show some physical changes like porosity, swelling with external stimuli, and the switchable physical properties provide huge and wide-spread biomedical applications of these polymers [27,28]. Thermo-responsive polymers show sol-gel transitions with a change in temperature of the external environment and hydrogels made of thermoresponsive polymers find tremendous drug delivery applications through simple chemical modifications [29,30,31,32], and some thermoresponsive polymers are capable of forming hydrogel near body temperature [33,34]. A part of thermoresponsive polymers show Arrhenius-type viscosity changes based on coil to globule transitions and others show enthalpic or entropic driven sol-gel transition [22,24]. The synthetic thermoresponsive polymers mainly poly(N-isopropylacrylamide) (pNIPAAm) and pluronic F127 (PF127) are widely used for drug delivery applications since they can form gels near the body temperature of 37 °C [35,36,37]. The stimuli-responsive behavior of thermoresponsive polymers has been schematized in Figure 1 and this diagram of the thermoresponsive polymer having LCST shows sol-gel transition with the temperature. The phase change of thermoresponsive polymers in Figure 2 has been shown to be reversible where the polymer chains form hydrogel above LCST and the polymer chains are found to be in close proximity encapsulating a drug within it. The hydrogel reverts back to the sol phase when the temperature is below LCST and the polymers are soluble in the solvent mixture with no encapsulated drug (Figure 2). The swelling-shrinking behavior of pH-responsive polymers in response to an external pH condition makes them suitable for drug delivery applications [38,39,40]. The cationic pH responsive polymers including chitosan, poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), and poly(N,N-diethylaminoethyl methacrylate) (PDEAEMA) swell in acidic pH and shrink in basic pH, where the basic pH-responsive polymers such as albumin and polyacrylic acid (PAA) swell in basic pH and shrink in acidic pH [41,42]. The stimuli-responsive behavior of pH-responsive polymers has been presented in Figure 2 and this schematic diagram of pH-responsive hydrogels gives an idea about the sensitivity of pH-responsive polymers toward different external pH conditions. As shown in Figure 2, depending on the charge groups of pH-responsive polymers, their hydrogels are found to change their swollen/shrinkage state in response to external pH of the media. Textile-based transdermal therapy using drug loaded hydrogels made of stimuli-responsive polymers has become an effective means of skin care [35,43,44,45]. Wang et al. [43,44] developed PF127-based thermo-responsive hydrogels to load water soluble traditional Chinese drug Cortex moutan, which has been reported to be effective against pathogenesis related to atopic dermatitis and the transdermal therapy using their system seems to be an effective means to fight against this disease using smart textiles. The functionalized textiles coated with stimuli-responsive hydrogel can balance moisture on the skin and give comfort by actively balancing body temperature [46,47]. The functionalized textiles coated with stimuli-responsive hydrogels are enriched with soft display, aesthetic appeal, and improved wetting properties [48,49,50]. In this review, the drug delivery and textile applications of various stimuli-responsive polymers have been considered. The textile applications of stimuli-responsible polymers mainly focus on textile based transdermal therapy where drugs and moisture are simultaneously transferred to infected sites on the skin. The whole review has been divided into two parts: drug delivery and textile applications of natural stimuli-responsive polymers including chitosan, albumin, cellulose, gelatin, and those of synthetic polymers including PF127, pNIPAAm, poly(ethylene glycol) (PEG), polyacrylic acid (PAA), and poly(dimethylaminoethyl methacrylate) (PDMAEMA) and poly(diethylaminoethyl methacrylate) (PDEAEMA). Figure 3 highlights the main objective of the study and outlines the properties of stimuli-responsive polymers of biological and synthetic origin, and their biomedical applications in brief. The chemical structure of natural polymers are given in Figure 4. Figure 5 depicts the chemical structure of all synthetic polymers described in this case. The natural polymers are capable of showing both thermo-responsive and pH-responsive properties as well as simple chemical modifications and composite formation with other polymers are applied to increase and improve their biomedical applications especially for drug delivery. Synthetic thermo-responsive polymers are well recognized for their in situ gel forming ability. Their simple chemical modifications and composite formations are applied using other polymers of natural or synthetic origin to increase their biocompatibility and reduce toxicity. The chemical nature, type of stimuli-responsiveness, and biomedical applications of all stimuli-responsive polymers are described in Table 1.
What the sources say
- Supportedcites [20] Koetting, 2015, Stimulus-responsive hydrogels: Theory, modern advances, and applications, Mater. Sci. Eng. source
Section 8.1 explicitly describes a sol–gel transition in temperature-responsive gels. Section 8.2 reports that lowering pH increases silk fibroin gelation rates, and Section 6.2 describes light-triggered switching from solution to gel. These examples support the claim that such transitions can occur in response to temperature, pH, and light; page numbers are not available in our copy. (LLM, conf=0.88)
- Not checked — no full text of the sourcecites [21] Jeong, 2000, Thermogelling biodegradable polymers with hydrophilic backbones: PEG-g-PLGA, Macromolecules source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The carbomethyl cellulose, which is another functional derivative of cellulose, is capable of forming thermo-responsive hydrogel.”
§ Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application > 2. Natural Stimuli-Responsive Polymers > 2.2. Cellulose Cellulose, which is the most abundant natural polymer on earth, is made up of glucose monomers and capable of forming hydrogel using their functional hydroxyl groups [65,66]. Methylcellulose, which is the functional material developed from cellulose, is water soluble and can show a thermo-responsive property with the sol-gel transition in the temperature range of 60 to 80 °C [24,67]. The thermo-responsive hydrogel made from pNIPAAm and methylcellulose showed gel formation near the body temperature and the mechanical strength of the hydrogel was improved [68]. The thermo-responsive hydrogel from methylcellulose and PF127 was used as a drug delivery system for anti-cancer drug docetaxel and the system showed more sustained drug release than free docetaxel [69]. The thermo-responsive hydrogel from kappa-carrageenan and methylcellulose showed double thermal gel-sol-gel transition upon heating and was used for developing the drug delivery system [70]. The injectable bone substitute was prepared from the thermo-responsive hydrogel of methylcellulose, gelatin, and citric acid with a bio-ceramic powder loaded into it [71]. The injectable thermosensitive hydrogel from methylcellulose and chitosan was applied for tissue engineering and showed sol-gel transition near the body temperature of 37 °C [72]. The carbomethyl cellulose, which is another functional derivative of cellulose, is capable of forming thermo-responsive hydrogel. The drug delivery system formed from carboxymethyl cellulose and gelatin showed sol-gel transition near the body temperature and was used for transdermal drug therapy with lidocaine [73]. The thermo-responsive hydrogel formed from carboxymethyl cellulose sodium and Poloxamer 407 was used as the drug delivery system for Chinese herbal medicine in textile-based transdermal therapy [43,44]. The hydrogel system with traditional Chinese medicine was mainly applied for the treatment of atopic dermatitis and the hydrogel with thermo-responsive property is capable of showing sol-gel transition near a body temperature of 37 °C [43,44]. The stimuli-responsive hydrogels made from cellulose have been becoming popular for the last few years due to their biocompatibility and non-toxicity. The pH-responsive hydrogel of cellulose was developed by simply mixing aqueous solutions of cellulose acetoacetate and cystamine dihydrochloride at room temperature and, moreover, this cellulose-based hydrogel showed dual responsiveness via reversible sol-gel transitions in response to both pH and redox triggers [74]. The cellulose-based hydrogels after epichlorohydrin mediated cross-linking of quaternized cellulose and carboxymethyl cellulose showed a pH responsive property along with salt responsiveness and the mass ratio of two cellulose-based compounds in the composites was varied to compare their pH and salt responsiveness [75]. These cellulose-based hydrogels are reported to have various biomedical applications including drug delivery and tissue engineering [75]. The hydrogel system made of carboxymethyl cellulose and pNIPAAm showed the pH-responsive character along with thermo and redox responsiveness [76]. The multi-responsive hydrogel was used as a drug delivery system for lysozyme and the release of lysozyme from the system was studied at a different pH, temperature, and redox environments to ensure its maximum effective drug delivery applications [76]. The pH-responsive hydrogel made of hydroxyethyl cellulose and hyaluronic acid was used as a drug delivery system for the treatment of skin lesions and this transdermal drug delivery system loaded with isoliquiritigenin was found to be effective for the treatment of acne since it showed excellent permeability in the skin [77].
What the sources say
- Partly supportedcites [73] Nayak, 2016, Lidocaine carboxymethylcellulose with gelatine co-polymer hydrogel delivery by combined microneedle and ultrasound, Drug Deliv. sourceExperimental — accuracy not yet measured
The Materials and methods section says sodium carboxymethylcellulose was cross-linked with gelatin to form a hydrogel. The Formulation section describes cooling the mixture to harden microparticles, but neither section establishes that the resulting hydrogel is thermo-responsive. Page numbers are unavailable in our copy. (LLM, conf=0.82)
- Partly supportedcites [43] Wang, 2016, Dual-functional transdermal drug delivery system with controllable drug loading based on thermosensitive poloxamer hydrogel for atopic dermatitis treatment, Sci. Rep. UK sourceExperimental — accuracy not yet measured
The Methods (Materials; Preparation of P407/CMCs composite hydrogel, pages unavailable) identify CMCs as carboxymethyl cellulose sodium and describe adding it to poloxamer 407 to make a composite hydrogel. The Results (Phase transition analysis, page unavailable) show that the composite is thermo-responsive, but do not establish that carboxymethyl cellulose forms a thermo-responsive hydrogel on its own. (LLM, conf=0.86)
- Partly supportedcites [44] Wang, W., Hui, P.C.L., Wat, E., Chan, B., Ng, F.S.F., Kan, C.-W., Lau, C.B.S., and Leung, P.-C. (2016). Enhanced transdermal permeability via constructing the porous structure of poloxamer-based hydrogel. Polymers-Basel, 8. sourceExperimental — accuracy not yet measured
The Introduction identifies poloxamer 407 as the thermosensitive polymer and says carboxymethyl cellulose sodium (CMCs) was added to reinforce and regulate the poloxamer matrix. The Results (section 3.1; page unavailable) show that the P407/CMCs composite has a gelation transition temperature, but the paper does not establish that CMC itself can form a thermoresponsive hydrogel. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The anionic hydrogel forming albumin can show pH-responsiveness by swelling in basic pH medium and shrinking in acidic pH [27,81].”
§ Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application > 2. Natural Stimuli-Responsive Polymers > 2.3. Albumin
What the sources say
- Partly supportedcites [27] Sood, 2016, Stimuli-responsive hydrogels in drug delivery and tissue engineering, Drug Deliv. sourceExperimental — accuracy not yet measured
The pH-sensitive or ion-sensitive hydrogels section says an anionic polymer, polyacrylic acid, swells more at high pH, supporting the general pH-response pattern. It does not identify albumin as that polymer or establish that albumin hydrogels swell in basic conditions and shrink in acidic conditions (searched: albumin; albumin hydrogel swelling acidic basic pH). (LLM, conf=0.84)
- Partly supportedcites [81] Raja, 2015, pH and redox sensitive albumin hydrogel: A self-derived biomaterial, Sci. Rep. UK. sourceExperimental — accuracy not yet measured
The Abstract reports maximum swelling at alkaline pH, supporting the basic-pH part of the claim. But the Results and Discussion report a five- to eight-fold weight increase at acidic pH 2.0, not shrinking in acidic conditions. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The synthetic thermoresponsive polymers mainly poly(N-isopropylacrylamide) (pNIPAAm) and pluronic F127 (PF127) are widely used for drug delivery applications since they can form gels near the body temperature of 37 °C [35,36,37].”
§ Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application > 1. Introduction Hydrogels are three-dimensional polymeric networks made up of the same or different hydrophilic polymers and contain large amounts of water in their structure [1,2,3]. The polymeric backbone with hydrophilic functional groups hold a large amount of water in the structure and crosslinking network formed by polymeric chains, which resists its dissolution in water [4,5]. Hydrogels exhibit the ability to swell and possess some degree of flexibilities, which are very similar to the natural tissue due to their large water content. The compactness of hydrogels in aqueous media is maintained by physical cross-linking (e.g., entanglements, crystallites) and, also, chemical cross-linking [6,7]. Hydrogels widely vary in their composition, chemical structure, biodegradability, and various physio-chemical properties such as spectral and mechanical properties, pH stability, and, depending on all such factors, their biological function and performances vary in multiple dimensions [8,9,10]. Hydrogels resemble some physical properties of living tissues such as high-water content, compactness, and low interfacial tension with aqueous media, and those properties of hydrogels impart their great applicability in the bio-medical field, especially for drug delivery [11,12,13,14]. The biomedical applications of hydrogels including drug delivery, tissue engineering, clinical bandages, and biosensors come in the form of film/film forming systems, micro/nano-sphere, matrix, nanoparticles, and nanocomposites depending on the chemical composition and processing parameters of hydrogels [15,16,17,18]. The suitable use of hydrogels for delivering drugs can be upgraded by modifying their transport properties for drugs and also by chemical modification [4,19]. The recent focus on functional polymers mostly centers around stimuli-responsive polymers and these polymers have attracted great attention since these can show sol-gel transitions in response to external triggers like temperature, pH, and light [20,21]. Moreover, the physical changes in stimuli-responsive polymers are reversible and they are capable of returning to their initial state after the trigger is removed [21]. In recent years, there has been a remarkable growth in the development of stimuli-responsive polymer-based drug delivery systems with sustained and controlled drug release properties [22,23]. The important feature of stimuli-responsive polymers is the critical solution temperature (CST), which can be defined as a critical temperature at which the polymeric solution shows a phase separation, which moves from the isotropic state to the anisotropic state [21]. The polymer with lower critical solution temperature (LCST) shows the solution phase below CST and becomes insoluble or forms hydrogels over CST with heating [20]. The LSCT can be defined as a critical temperature at which the polymeric solution shows a phase separation, which moves from the isotropic state to the anisotropic state [21]. The polymers with LCST are mostly used for developing drug delivery systems [22]. Stimuli-responsive gelling materials constructed from natural and synthetic polymers are successfully used to develop drug delivery systems and regenerative medicine products because of their triggered actions in response to external stimuli [24,25,26]. The hydrogels made of stimuli-responsive polymers can show some physical changes like porosity, swelling with external stimuli, and the switchable physical properties provide huge and wide-spread biomedical applications of these polymers [27,28]. Thermo-responsive polymers show sol-gel transitions with a change in temperature of the external environment and hydrogels made of thermoresponsive polymers find tremendous drug delivery applications through simple chemical modifications [29,30,31,32], and some thermoresponsive polymers are capable of forming hydrogel near body temperature [33,34]. A part of thermoresponsive polymers show Arrhenius-type viscosity changes based on coil to globule transitions and others show enthalpic or entropic driven sol-gel transition [22,24]. The synthetic thermoresponsive polymers mainly poly(N-isopropylacrylamide) (pNIPAAm) and pluronic F127 (PF127) are widely used for drug delivery applications since they can form gels near the body temperature of 37 °C [35,36,37]. The stimuli-responsive behavior of thermoresponsive polymers has been schematized in Figure 1 and this diagram of the thermoresponsive polymer having LCST shows sol-gel transition with the temperature. The phase change of thermoresponsive polymers in Figure 2 has been shown to be reversible where the polymer chains form hydrogel above LCST and the polymer chains are found to be in close proximity encapsulating a drug within it. The hydrogel reverts back to the sol phase when the temperature is below LCST and the polymers are soluble in the solvent mixture with no encapsulated drug (Figure 2). The swelling-shrinking behavior of pH-responsive polymers in response to an external pH condition makes them suitable for drug delivery applications [38,39,40]. The cationic pH responsive polymers including chitosan, poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), and poly(N,N-diethylaminoethyl methacrylate) (PDEAEMA) swell in acidic pH and shrink in basic pH, where the basic pH-responsive polymers such as albumin and polyacrylic acid (PAA) swell in basic pH and shrink in acidic pH [41,42]. The stimuli-responsive behavior of pH-responsive polymers has been presented in Figure 2 and this schematic diagram of pH-responsive hydrogels gives an idea about the sensitivity of pH-responsive polymers toward different external pH conditions. As shown in Figure 2, depending on the charge groups of pH-responsive polymers, their hydrogels are found to change their swollen/shrinkage state in response to external pH of the media. Textile-based transdermal therapy using drug loaded hydrogels made of stimuli-responsive polymers has become an effective means of skin care [35,43,44,45]. Wang et al. [43,44] developed PF127-based thermo-responsive hydrogels to load water soluble traditional Chinese drug Cortex moutan, which has been reported to be effective against pathogenesis related to atopic dermatitis and the transdermal therapy using their system seems to be an effective means to fight against this disease using smart textiles. The functionalized textiles coated with stimuli-responsive hydrogel can balance moisture on the skin and give comfort by actively balancing body temperature [46,47]. The functionalized textiles coated with stimuli-responsive hydrogels are enriched with soft display, aesthetic appeal, and improved wetting properties [48,49,50]. In this review, the drug delivery and textile applications of various stimuli-responsive polymers have been considered. The textile applications of stimuli-responsible polymers mainly focus on textile based transdermal therapy where drugs and moisture are simultaneously transferred to infected sites on the skin. The whole review has been divided into two parts: drug delivery and textile applications of natural stimuli-responsive polymers including chitosan, albumin, cellulose, gelatin, and those of synthetic polymers including PF127, pNIPAAm, poly(ethylene glycol) (PEG), polyacrylic acid (PAA), and poly(dimethylaminoethyl methacrylate) (PDMAEMA) and poly(diethylaminoethyl methacrylate) (PDEAEMA). Figure 3 highlights the main objective of the study and outlines the properties of stimuli-responsive polymers of biological and synthetic origin, and their biomedical applications in brief. The chemical structure of natural polymers are given in Figure 4. Figure 5 depicts the chemical structure of all synthetic polymers described in this case. The natural polymers are capable of showing both thermo-responsive and pH-responsive properties as well as simple chemical modifications and composite formation with other polymers are applied to increase and improve their biomedical applications especially for drug delivery. Synthetic thermo-responsive polymers are well recognized for their in situ gel forming ability. Their simple chemical modifications and composite formations are applied using other polymers of natural or synthetic origin to increase their biocompatibility and reduce toxicity. The chemical nature, type of stimuli-responsiveness, and biomedical applications of all stimuli-responsive polymers are described in Table 1.
What the sources say
- Partly supportedcites [35] Chatterjee, S., Hui, P.C.-l., and Kan, C.-W. (2018). Thermoresponsive hydrogels and their biomedical applications: Special insight into their applications in textile based transdermal therapy. Polymers-Basel, 10. sourceExperimental — accuracy not yet measured
Section 3.1 describes pNIPAAm as extensively studied for drug delivery and reports gelation around 32 °C, close to body temperature. Sections 3.2 and 4 describe PF127 drug-delivery applications and sol–gel transition near body temperature. But Section 4 says concerns about pNIPAAm hydrogels have largely prevented their use in real drug-delivery systems, so the claim that both are widely used overstates the source. (LLM, conf=0.85)
- Not checked — no full text of the sourcecites [36] Bajpai, 2008, Responsive polymers in controlled drug delivery, Prog. Polym. Sci. source
- Partly supportedcites [37] Tang, 2017, Synthesis and characterization of thermoresponsive hydrogels Based on N-Isopropylacrylamide crosslinked with 4,4′-dihydroxybiphenyl diacrylate, ACS Omega sourceExperimental — accuracy not yet measured
The Introduction (page not provided) describes NIPAAm-based hydrogels as useful for drug delivery and says biomedical applications often require a transition temperature near body temperature. It gives their typical transition temperature as 32 °C, however, and does not discuss PF127 or establish that either polymer forms gels near 37 °C. (LLM, conf=0.85)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“For last few years, the potential drug delivery applications of PF127-based systems have been emerging for transdermal therapy [35].”
§ Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application > 3. Synthetic Stimuli-Responsive Polymers > 3.1. Pluronic F127 Pluronic F127 (PF127) is a non-ionic triblock copolymer of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) and, being a thremo-responsive synthetic polymer, PF127 can form the hydrogel near the body temperature [35,95]. PF127 is approved by the ‘U.S. Food and Drug Administration’ (FDA) to be used in biomedical areas especially for drug delivery, tissue engineering, and the administration of the PF127-based drug delivery system, which can be oral, ocular, intranasal, subcutaneous, vaginal, and rectal [95]. For last few years, the potential drug delivery applications of PF127-based systems have been emerging for transdermal therapy [35]. The thermo-responsive hydrogel made of PF127 and hyaluronic acid showed gel formation at a body temperature of 37 °C and was used as a drug delivery system for a human growth hormone [96]. The thermo-responsive hydrogel made of hyaluronic acid grafted PF127 showed in situ gel formation and was applied for delivery of model anti-cancer drugs cisplatin and carboplatin [97]. The drug delivery system made from thermo-responsive hydrogel of glycol chitosan and PF127 by photo-polymerization was applied for delivery of doxorubicin [98]. The biodegradable thermo-responsive composite hydrogel made of PF127 and PEG-poly(ε-caprolactone)-PEG copolymer was applied as a drug delivery system for model drugs Vitamin B12, honokiol, and BSA and the hydrogel showed sol-gel transition at the body temperature [99]. The thermo-responsive hydrogel made from chitosan and PF-127 was applied as a drug delivery system for model anti-cancer drug 5-fluorouracil [100]. The hydrogel system made of PF127 and Pluronic F68 was evaluated for in situ hydrogel formation under physiological conditions and the hydrogel made of PF127 (20 wt%) was found to be capable of forming hydrogel under a physiological condition. However, the addition of Pluronic F68 to PF127 enhanced the gelation temperature and could not form hydrogels under physiological condition [101]. This thermo-responsive hydrogel was applied for ocular drug delivery [101]. The thermo-responsive hydrogel made of PF127 and alginate was applied as a drug delivery system of a model drug selegeline for transdermal therapy. The drug delivery system showed sustained and controlled release of selegeline [102]. The PF127-based thermo-responsive hydrogels were used in textile-based transdermal therapy for the treatment of AD. The hydrogels made of PF127 and carboxymethyl cellulose sodium were loaded with Chinese herbal medicine to deliver moisture and drugs simultaneously to infected sites on the skin [43,44].
What the sources say
- Supportedcites [35] Chatterjee, S., Hui, P.C.-l., and Kan, C.-W. (2018). Thermoresponsive hydrogels and their biomedical applications: Special insight into their applications in textile based transdermal therapy. Polymers-Basel, 10. source
Section 3.2, “Pluronics or Poloxamers,” explicitly says PF127-based hydrogels are applied for transdermal drug delivery and describes their use in textile-based transdermal therapy. This supports the claim that PF127-based systems have potential drug-delivery applications in that setting. (LLM, conf=0.92)
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
14 more claims · 9 with their cited sources checked
Create a free account to see all 44 claims and every source verdict.
- Probably not a substantial claim. 6
- It may state two separate claims as one. 20
Citations
Cites
Hydrogel: Preparation, characterization, and applications: A review
Ahmed, E. M. (2015) · Journal of Advanced Research · doi:10.1016/j.jare.2013.07.006 · Cited by 5,800 · cited 2×
“The suitable use of hydrogels for delivering drugs can be upgraded by modifying their transport properties for drugs and also by chemical modification [4,19].”
BackgroundMethodHydrogels for biomedical applications
Hoffman, A. S. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00239-3 · Cited by 4,864
Designing hydrogels for controlled drug delivery
Li, J., & Mooney, D. J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.71 · Cited by 4,832
Hydrogels in drug delivery: Progress and challenges
Hoare, T. R., & Kohane, D. S. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.027 · Cited by 3,776 · cited 1×
“The suitable use of hydrogels for delivering drugs can be upgraded by modifying their transport properties for drugs and also by chemical modification [4,19].”
MethodHydrophilic gels for biological use
WICHTERLE, O., & LÍM, D. (1960) · Nature · doi:10.1038/185117a0 · Cited by 2,996
Biomedical applications of hydrogels: A review of patents and commercial products
Caló, E., & Khutoryanskiy, V. V. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.11.024 · Cited by 2,634
Hydrogels: From controlled release to pH-responsive drug delivery
Gupta, P., Vermani, K., & Garg, S. (2002) · Drug Discovery Today · doi:10.1016/s1359-6446(02)02255-9 · Cited by 1,825 · cited 1×
“The cationic pH responsive polymers including chitosan, poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), and poly(N,N-diethylaminoethyl methacrylate) (PDEAEMA) swell in acidic pH and shrink in basic pH, where the basic pH-responsive polymers such as albumin and polyacrylic acid (PAA) swell in basic pH and shrink i…”
BackgroundKamoun, E. A., Kenawy, E.-R. S., & Chen, X. (2017) · Journal of Advanced Research · doi:10.1016/j.jare.2017.01.005 · Cited by 1,707
Thermosensitive sol-gel reversible hydrogels
Jeong, B., Kim, S. W., & Bae, Y. H. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00242-3 · Cited by 1,478
Responsive polymers in controlled drug delivery
Bajpai, A. K., Shukla, S. K., Bhanu, S., & Kankane, S. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.005 · Cited by 1,391
Research works printed but not linked: 1
- Kulkarni, 2010, Smart polymers in drug delivery: An overview, J. Pharm. Res., 3, 100
Cited by
Stimuli-Responsive Polymeric Nanocarriers for Drug Delivery, Imaging, and Theragnosis
Das, S. S., Bharadwaj, P., Bilal, M., Barani, M., Rahdar, A., Taboada, P., Bungau, S., & Kyzas, G. Z. (2020) · Polymers · doi:10.3390/polym12061397 · Cited by 581
“[216] Bioimaging is a noninvasive method of observing biological behavior over a given period of time which does not hinder the various life cycles, such as movement, respiration, etc.”
MethodEl-Husseiny, H. M., Mady, E. A., Hamabe, L., Abugomaa, A., Shimada, K., Yoshida, T., Tanaka, T., Yokoi, A., Elbadawy, M., & Tanaka, R. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2021.100186 · Cited by 533
“Hydrogels containing cationic groups as PDMAEMA, CH, and PDEAEMA swell at pH lower than pKa and deswell at pH higher than pKa [100,218, 219].”
BackgroundA Review on the Design and Hydration Properties of Natural Polymer-Based Hydrogels
Karoyo, A. H., & Wilson, L. D. (2021) · Materials · doi:10.3390/ma14051095 · Cited by 351
“The general mechanism of a stimuli-responsive behavior of pH-responsive hydrogels is presented in Figure 8 [78].”
BackgroundPolymeric Nanoparticles for Delivery of Natural Bioactive Agents: Recent Advances and Challenges
Elmowafy, M., Shalaby, K., Elkomy, M. H., Alsaidan, O. A., Gomaa, H. A. M., Abdelgawad, M. A., & Mostafa, E. M. (2023) · Polymers · doi:10.3390/polym15051123 · Cited by 332
“On the other hand, near-infrared light [289], ultrasound [290], and temperature [291] were reported to control the release from some polymeric materials.”
BackgroundpH ‐responsive polymers for drug delivery: Trends and opportunities
Singh, J., & Nayak, P. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230403 · Cited by 327
Constructions and Properties of Physically Cross-Linked Hydrogels Based on Natural Polymers
Yang, J., Chen, Y., Zhao, L., Zhang, J., & Luo, H. (2023) · Polymer Reviews · doi:10.1080/15583724.2022.2137525 · Cited by 261
Cellulose-Based Hydrogels as Sustained Drug-Delivery Systems
Ciolacu, D. E., Nicu, R., & Ciolacu, F. (2020) · Materials · doi:10.3390/ma13225270 · Cited by 257
“3% in 1 h), having the smaller particle sizes with a greater surface area [78].”
BackgroundInfluentialRecent advances in the synthesis of smart hydrogels
Sikdar, P., Uddin, M. M., Dip, T. M., Islam, S., Hoque, M. S., Dhar, A. K., & Wu, S. (2021) · Materials Advances · doi:10.1039/d1ma00193k · Cited by 254
Stimulus-responsive sequential release systems for drug and gene delivery
Ahmadi, S., Rabiee, N., Bagherzadeh, M., Elmi, F., Fatahi, Y., Farjadian, F., Baheiraei, N., Nasseri, B., Rabiee, M., Dastjerd, N. T., et al. (2020) · Nano Today · doi:10.1016/j.nantod.2020.100914 · Cited by 248
Kuperkar, K., Atanase, L., Bahadur, A., Crivei, I., & Bahadur, P. (2024) · Polymers · doi:10.3390/polym16020206 · Cited by 240
Lombardo, D., Calandra, P., Pasqua, L., & Magazù, S. (2020) · Materials · doi:10.3390/ma13051048 · Cited by 229
“Possible trigger effects caused by (internal/external) stimuli may activate a structural response of the system (stimuli responsive nanomaterials) [10,11].”
BackgroundMetal-organic frameworks for improving wound healing
Chen, S., Lu, J., You, T., & Sun, D. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2021.213929 · Cited by 185
Carbon-Based Stimuli-Responsive Nanomaterials: Classification and Application
Zhao, C., Kang, J., Li, Y., Wang, Y., Tang, X., & Jiang, Z. (2023) · Cyborg and Bionic Systems · doi:10.34133/cbsystems.0022 · Cited by 186
“In the past 10 years, the safety of carbon-based stimuliresponsive materials is a research hotspot [76] (Fig.”
Wearable and implantable devices for drug delivery: Applications and challenges
Kar, A., Ahamad, N., Dewani, M., Awasthi, L., Patil, R., & Banerjee, R. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121435 · Cited by 179
Enhancing in situ cancer vaccines using delivery technologies
Gong, N., Alameh, M.-G., El-Mayta, R., Xue, L., Weissman, D., & Mitchell, M. J. (2024) · Nature Reviews Drug Discovery · doi:10.1038/s41573-024-00974-9 · Cited by 173
Chatterjee, S., & Hui, P. C.-L. (2021) · Polymers · doi:10.3390/polym13132086 · Cited by 168
“Ov r th la t few years, it has been a growg int rest in develop ng drug delivery systems of thermo-re ponsive polysa charides which exhibit LCST [6,9].”
BackgroundSelf-citationA Critical Review on Polymeric Biomaterials for Biomedical Applications
Kalirajan, C., Dukle, A., Nathanael, A. J., Oh, T.-H., & Manivasagam, G. (2021) · Polymers · doi:10.3390/polym13173015 · Cited by 152
Towards a new class of stimuli-responsive polymer-based materials – Recent advances and challenges
Bratek‐Skicki, A. (2021) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2021.100068 · Cited by 158
Wang, X., Wang, Q., & Xu, C. (2020) · Bioengineering · doi:10.3390/bioengineering7020040 · Cited by 133
“Hui recently reviewed the stimuli-responsive polymers, mainly including chitosan, cellulose, and gelatin, imparting sensitivity to act in responding to temperatures and pH conditions for their respective applications in drug delivery [81].”
BackgroundPolysaccharide-Based Hydrogels for Advanced Biomedical Engineering Applications
Rumon, M. M. H., Akib, A. A., Sarkar, S. D., Khan, M. A. R., Uddin, M. M., Nasrin, D., & Roy, C. K. (2024) · ACS Polymers Au · doi:10.1021/acspolymersau.4c00028 · Cited by 153
Hydrogels as artificial matrices for cell seeding in microfluidic devices
Akther, F., Little, P., Li, Z., Nguyen, N.-T., & Ta, H. T. (2020) · RSC Advances · doi:10.1039/d0ra08566a · Cited by 127
Advancements and Prospects of pH-Responsive Hydrogels in Biomedicine
Gao, K., & Xu, K. (2025) · Gels · doi:10.3390/gels11040293 · Cited by 136
“…synthesizes literature from the past five years focusing Previous literature reviews have predominantly focused on the fabrication principles and drug delivery applications of pH-responsive hydrogels [26–29]. hydrogels, aiming to elucidate their evolving roles in biomedical research and therapy.”
Chen, T., Liu, W., Xiong, S., Li, D., Fang, S., Wu, Z., Wang, Q., & Chen, X. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b16047 · Cited by 111
Bioperspectives for Shape-Memory Polymers as Shape Programmable, Active Materials
Lendlein, A., Balk, M., Tarazona, N. A., & Gould, O. E. C. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b01074 · Cited by 95
Zhu, Y., Yao, Z., Liu, Y., Zhang, W., Geng, L., & Ni, T. (2020) · International Journal of Nanomedicine · doi:10.2147/ijn.s225197 · Cited by 96
Chatterjee, S., Hui, C. L., Wat, E., Kan, C. W., Leung, P.-C., & Wang, W. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116074 · Cited by 95
Self-citationHybrid Thermo-Responsive Polymer Systems and Their Biomedical Applications
Sarwan, T., Kumar, P., Choonara, Y. E., & Pillay, V. (2020) · Frontiers in Materials · doi:10.3389/fmats.2020.00073 · Cited by 90
Gevrek, T. N., & Sanyal, A. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110514 · Cited by 86
Liposomes-Based Drug Delivery Systems of Anti-Biofilm Agents to Combat Bacterial Biofilm Formation
Makhlouf, Z., Ali, A. A., & Al-Sayah, M. H. (2023) · Antibiotics · doi:10.3390/antibiotics12050875 · Cited by 92
“As explained previously, one way to increase an agent’s selectivity and bioavailability is the concept of controlled release: the incorporation of constituents that only respond to certain internal or external stimuli [86].”
BackgroundColino, C. I., Lanao, J. M., & Millán, C. G. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111843 · Cited by 84
pH-sensitive cellulose/chitin nanofibrillar hydrogel for dye pollutant removal
Jung, S., Kim, J., Bang, J., Jung, M., Park, S., Yun, H., & Kwak, H. W. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121090 · Cited by 86
Promising Drug Delivery Approaches to Treat Microbial Infections in the Vagina: A Recent Update
Pandey, M., Choudhury, H., Aziz, A. A., Bhattamisra, S. K., Gorain, B., Carine, T., Toong, T. W., Yi, N. J., & Yi, L. W. (2020) · Polymers · doi:10.3390/polym13010026 · Cited by 105
Biomaterials in treatment of Alzheimer's disease
Agrawal, M., Prathyusha, E., Ahmed, H., Dubey, S. K., Kesharwani, P., Singhvi, G., Naidu, V. G. M., & Alexander, A. (2021) · Neurochemistry International · doi:10.1016/j.neuint.2021.105008 · Cited by 79
Mo, Y., Duan, L., Yang, Y., Liu, W., Zhang, Y., Zhou, L., Su, S., Lo, P.-C., Cai, J., Gao, L., et al. (2021) · Nanoscale · doi:10.1039/d0nr06249a · Cited by 79
Bottom-Up Engineering of Responsive Hydrogel Materials for Molecular Detection and Biosensing
Lim, J. Y. C., Goh, S. S., & Loh, X. J. (2020) · ACS Materials Letters · doi:10.1021/acsmaterialslett.0c00204 · Cited by 79
Recent advances in celluloses and their hybrids for stimuli-responsive drug delivery
Gunathilake, T. M. S. U., Ching, Y. C., Chuah, C. H., Rahman, N. A., & Liou, N.-S. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.05.010 · Cited by 79
Recent developments in stimuli-responsive polymer for emerging applications: A review
Khalil, A. K. A., Teow, Y. H., Takriff, M. S., Ahmad, A. L., & Atieh, M. A. (2025) · Results in Engineering · doi:10.1016/j.rineng.2024.103900 · Cited by 91
Aram, E., Moeni, M., Abedizadeh, R., Sabour, D., Sadeghi-Abandansari, H., Gardy, J., & Hassanpour, A. (2022) · Nanomaterials · doi:10.3390/nano12203567 · Cited by 66
Chatterjee, S., Hui, C. L., Siu, W. S., Kan, C. W., Leung, P.-C., Wanxue, C., & Chiou, J. A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.12.035 · Cited by 65
Self-citationPourmasoumi, P., Moghaddam, A., Mahand, S. N., Heidari, F., Moghaddam, Z. S., Arjmand, M., Kuehnert, I., Kruppke, B., Wiesmann, H., & Khonakdar, H. A. (2022) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2022.2110480 · Cited by 66
“In addition, poly(ethylene glycol) (PEG), polyacrylic acid (PAA), poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) and poly(N,N-diethylaminoethyl methacrylate) (PDEAEMA) are other pH-responsive materials [92].”
Redefining polymer science via multi-stimulus responsiveness
Wang, S., & Urban, M. W. (2023) · Chem · doi:10.1016/j.chempr.2023.04.014 · Cited by 64
Graphene Oxide-Based Stimuli-Responsive Platforms for Biomedical Applications
Patil, T. V., Patel, D. K., Dutta, S. D., Ganguly, K., & Lim, K. (2021) · Molecules · doi:10.3390/molecules26092797 · Cited by 61
“Stimuli-responsive materials, such as GO, chitosan, cellulose, albumin, and gelatin have widely applied in sensors [21], actuators [22], self-healing coatings [23], textiles [24], diagnostics [25], soft robots [26], and optical systems [27].”
BackgroundMcCarthy, P. C., Zhang, Y., & Abebe, F. A. (2021) · Molecules · doi:10.3390/molecules26164735 · Cited by 63
“For example, swelling of chitosan-based hydrogels is highly pH-dependent and reversible and depends greatly on the crosslinking [57].”
BackgroundAdvances in Natural Polymer‐Based Transdermal Drug Delivery Systems for Tumor Therapy
Han, W., Liu, F., Li, Y., Liu, G., Li, H., Xu, Y., & Sun, S. (2023) · Small · doi:10.1002/smll.202301670 · Cited by 62
A Review on Gelatin Based Hydrogels for Medical Textile Applications
Petros, S., Tesfaye, T., & Ayele, M. (2020) · Journal of Engineering · doi:10.1155/2020/8866582 · Cited by 70
“Due to these properties, gelatin based hydrogels have various applications in drug delivery, tissue engineering, and medical textiles [67].”
BackgroundCotton-based health care textile: a mini review
Shahriari‐Khalaji, M., Alassod, A., & Nozhat, Z. (2022) · Polymer Bulletin · doi:10.1007/s00289-021-04015-y · Cited by 60
Pires, P. C., Damiri, F., Zare, E. N., Hasan, A., Neisiany, R. E., Veiga, F., Makvandi, P., & Paiva‐Santos, A. C. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.130296 · Cited by 58
Lee, H. K., Yang, Y. J., Koirala, G. R., Oh, S., & Kim, T. (2024) · Biomaterials · doi:10.1016/j.biomaterials.2024.122632 · Cited by 56
Requirement and Development of Hydrogel Micromotors towards Biomedical Applications
Lin, X., Xu, B., Zhu, H. Y., Liu, J., Solovev, A. A., & Mei, Y. (2020) · Research · doi:10.34133/2020/7659749 · Cited by 53
“The cationic pH-responsive hydrogels, such as chitosan, poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), and poly(N,N-diethylaminoethyl methacrylate), increase polymer matrix porosity in acidic pH and decrease the porosity in basic pH solutions, while pHresponsive polymers such as albumin and polyacrylic acid incr…”
BackgroundCellulose-based 3D printing bio-inks for biomedical applications: A review
Sharma, C., Raza, M. A., Purohit, S. D., Pathak, P., Gautam, S., Corridon, P. R., & Han, S. S. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.141174 · Cited by 50
Farjadian, F., Ghasemi, S., Andami, Z., & Tamami, B. (2020) · Iranian Polymer Journal · doi:10.1007/s13726-020-00785-w · Cited by 43
Pharmaceutical Applications of Biomass Polymers: Review of Current Research and Perspectives
Bejenaru, C., Radu, A., Segneanu, A., Biţă, A., Ciocîlteu, M. V., Mogoşanu, G. D., Bradu, I.-A., Vlase, T., Vlase, G., & Bejenaru, L. E. (2024) · Polymers · doi:10.3390/polym16091182 · Cited by 39
Guo, W. P., Hu, C., Wang, Y., Zhang, W., Zhang, S., Peng, J., Wang, Y., & Wu, J. (2025) · Acta Pharmaceutica Sinica B · doi:10.1016/j.apsb.2025.01.005 · Cited by 43
“Consequently, we have specifically chosen in situ injection of hydrogels for the treatment of cerebral infarction 15 .”
Chitosan/carbon nanotube hybrids: recent progress and achievements for industrial applications
Mallakpour, S. E., Azadi, E., & Hussain, C. M. (2021) · New Journal of Chemistry · doi:10.1039/d0nj06035f · Cited by 39
Stimuli-responsive polymeric nanomaterials for rheumatoid arthritis therapy
Xie, Y., Tuguntaev, R. G., Mao, C., Chen, H., Tao, Y., Wang, S., Yang, B., & Guo, W. (2020) · Biophysics Reports · doi:10.1007/s41048-020-00117-8 · Cited by 47
Tayebi-Khorrami, V., Rahmanian‐Devin, P., Fadaei, M. R., Movaffagh, J., & Askari, V. R. (2024) · International Journal of Pharmaceutics X · doi:10.1016/j.ijpx.2024.100265 · Cited by 56
Atanasova, D., Staneva, D., & Grabchev, I. K. (2021) · Materials · doi:10.3390/ma14040930 · Cited by 40
Stimuli‐Responsive Functional Polymeric Materials: Recent Advances and Future Perspectives
Dolui, S., Sahu, B., & Banerjee, S. (2025) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202400472 · Cited by 36
Electro‐Thermo Controlled Water Valve Based on 2D Graphene–Cellulose Hydrogels
Yang, K., Chen, M., Wang, Q., Grebenchuk, S., Chen, S., Leng, X., Novoselov, K. S., & Andreeva, D. V. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202201904 · Cited by 32
Organ-restricted delivery through stimuli-responsive nanocarriers for lung cancer therapy
Dinakar, Y. H., Karole, A., Parvez, S., Jain, V. K., & Mudavath, S. L. (2022) · Life Sciences · doi:10.1016/j.lfs.2022.121133 · Cited by 32
Parvathy, P. A., Ajisafe, V. A., Raichur, A. M., & Sahoo, S. K. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.09.183 · Cited by 32
Stimuli-Responsive Hydrogels for Protein Delivery
Malta, R., Marques, A. C., Costa, P. C., & Amaral, M. H. (2023) · Gels · doi:10.3390/gels9100802 · Cited by 32
“Also termed “smart” polymers, stimuli-responsive polymers respond to external stimuli with reversible changes as they return to their original state after the stimulus is removed [82].”
BackgroundHydrogels: A Promising Vehicle for the Topical Management of Atopic Dermatitis
Barbosa, A. I., Torres, T. R., Lima, S. A. C., & Reis, S. (2021) · Advanced Therapeutics · doi:10.1002/adtp.202100028 · Cited by 33
Temperature and pH responsive polymers: sensing applications
Gayathri, V., Jaisankar, S. N., & Samanta, D. (2021) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2021.1988636 · Cited by 34
“reviewing applications of stimuli-responsive polymers as gene/drug delivery, smart textiles,([1]) nanomedicines([13]) have also been reported.”
BackgroundSharma, A., Mittal, P., Yadav, A., Mishra, A. K., Hazari, P. P., & Sharma, R. K. (2022) · ACS Applied Bio Materials · doi:10.1021/acsabm.1c01078 · Cited by 29
Uptake and Release of Species from Carbohydrate Containing Organogels and Hydrogels
Pan, A., Roy, S. G., Haldar, U., Mahapatra, R. D., Harper, G. R., Low, W. L., De, P., & Hardy, J. G. (2019) · Gels · doi:10.3390/gels5040043 · Cited by 29
“externally applied stimuli [8], which offers opportunities for application as drug/fragrance delivery systems [9], hand sanitizers [10], and recovery/separation of crude oil [11–13].”
BackgroundNew Formulations Loading Caspofungin for Topical Therapy of Vulvovaginal Candidiasis
Pérez-González, N., Febrer, N. B.-D., Calpena, A. C., Nardi-Ricart, A., Rodríguez-Lagunas, M. J., Morales-Molina, J. A., Soriano-Ruiz, J. L., Fernández-Campos, F., & Clares, B. (2021) · Gels · doi:10.3390/gels7040259 · Cited by 30
“It is well-known that hydrogels are three-dimensional polymeric networks containing large amounts of water in their structure [31].”
BackgroundArroub, K., Gessner, I., Fischer, T., & Mathur, S. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100221 · Cited by 24
Mudjahid, M., Nainu, F., Utami, R. N., et al. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c16857 · Cited by 24
Multiple Natural Polymers in Drug and Gene Delivery Systems
Jiang, Z., Song, Z., Cao, C., Yan, M., Liu, Z., Cheng, X., Wang, H., Wang, Q., Liu, H., & Chen, S. (2023) · Current Medicinal Chemistry · doi:10.2174/0929867330666230316094540 · Cited by 30
Ahmad, N. N., Ghazali, N. N. N., & Wong, Y. H. (2021) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2021.113384 · Cited by 24
New Generation Smart Drug Delivery Systems for Rheumatoid Arthritis
Singh, R., Jadhav, K., Vaghasiya, K., Ray, E., Shukla, R., & Verma, R. K. (2023) · Current Pharmaceutical Design · doi:10.2174/1381612829666230406102935 · Cited by 26
Thermo-Responsive Antimicrobial Hydrogel for the In-Situ Coating of Mesh Materials for Hernia Repair
Kohler, B., Pascual, G., Martínez, S. B., Bellón, J. M., Eglin, D., & Guillaume, O. (2020) · Polymers · doi:10.3390/polym12061245 · Cited by 24
“The ability of thermo‐responsive hydrogels to respond to changes in temperature makes them highly effective drug carriers [24,25].”
BackgroundPreparation and properties of riboflavin-loaded sanxan microcapsules
Lu, H., Li, X., Yang, H., Wu, J., Zhang, Y., & Huang, H. (2022) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2022.107641 · Cited by 25
Liu, G., Wang, Y., Xue, Q., et al. (2021) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-020-05151-3 · Cited by 22
RetractedWang, S., Wu, J., Ren, K., Zhang, Y., Gao, F., Chen, Y., Chen, C., & Lü, J. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c02705 · Cited by 29
Sadraei, A., Naghib, S. M., & Rabiee, N. (2025) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2025.2466768 · Cited by 25
“Gels with positive charges such as PDMAEMA, CH, and Poly (diethylaminoethyl metha-crylate) (PDEAEMA) get bigger at a low pH and get smaller at a high pH [10,73,74].”
Zhao, R., Liang, B., Shi, Y., Gao, J., Wang, X., Shao, T., Xing, K., Yan, M., Wang, T., Zhang, Y., et al. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.102100 · Cited by 33
“Due to their unique ability to respond to external stimuli such as temperature changes, temperature-responsive hydrogels have garnered significant attention in various biomedical applications, particularly as controlled drug release systems [235].”
Cosma, M. P., & Brighenti, R. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.101842 · Cited by 24
Giuliano, E., Fresta, M., & Cosco, D. (2021) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2021.116588 · Cited by 18
Textile electronic systems for therapeutic applications
Lee, B. W., Kang, J., Yoo, J., & Won, S. M. (2025) · npj Flexible Electronics · doi:10.1038/s41528-025-00495-4 · Cited by 35
“Beyond electrical performance, functional coatings can impart additional therapeutic functionalities such as stimuli-responsive drug delivery andthermalregulationtotextile-basedsystems 100 – 103 .”
Smart polymer grafted silica based drug delivery systems
Shah, I. U., Jadhav, S. A., Belekar, V. M., & Patil, P. S. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5890 · Cited by 20
Effects of Steam Sterilization on the Properties of Stimuli-Responsive Polymer-Based Hydrogels
Ferreira, I., Marques, A. C., Costa, P. C., & Amaral, M. H. (2023) · Gels · doi:10.3390/gels9050385 · Cited by 17
“On the contrary, when the temperature is higher than the critical solution temperature, this polymer becomes insoluble, with phase separation and formation of a gel [8].”
BackgroundWong, Y. L., Pandey, M., Choudhury, H., et al. (2021) · Polymers · doi:10.3390/polym13162770 · Cited by 17
“Furthermore, the use of stimuli of the site of application has been explored with the possibilities of fabricating in situ formulations by the use of various polymers [27].”
Background(2021) · Biointerface Research in Applied Chemistry · doi:10.33263/briac123.34293445 · Cited by 17
Stimuli-Responsive Polymeric Nanosystems for Controlled Drug Delivery
Xiang, Z., Liu, M., & Song, J. (2021) · Applied Sciences · doi:10.3390/app11209541 · Cited by 18
“A variety of nanoparticles that are sensitive to temperature have been designed for thermo-controlled drug release based on thermo-sensitive polymeric materials such as poly( N -iso-propylacrylamide) (PNIPAAm) [35–37].”
BackgroundSmart hydrogel-based trends in future tendon injury repair: A review
Jiang, Y., Zhu, C., Ma, X., & Fan, D. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.137092 · Cited by 18
Biomedical Application of Cotton and Its Derivatives
Shahriari‐Khalaji, M., & Lugoloobi, I. (2020) · Textile science and clothing technology · doi:10.1007/978-981-15-9169-3_16 · Cited by 19
pH-Sensitive Dairy-Derived Hydrogels with a Prolonged Drug Release Profile for Cancer Treatment
Mayorova, O. A., Jolly, B. C. N., Verkhovskii, R. A., Plastun, V. O., Sindeeva, O. A., & Douglas, T. (2021) · Materials · doi:10.3390/ma14040749 · Cited by 15
“[9] Hence, it would be desirable to com- 60 bine the ability of WPI hydrogels to solubilize and carry hydrophobic drugs with pH re- 61 sponsiveness.”
BackgroundMultiscale metal-based nanocomposites for bone and joint disease therapies
Wang, Y., Jan, H., Zheng, Z., Zhou, L., Teng, K., Chen, Y., Xu, J., Xie, D., Chen, D., Xu, J., et al. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101773 · Cited by 23
“Consequently, changes in the pH of the medium can determine the diffusion characteristics and, therefore the release of drugs [199,200].”
Release profile of vitamin B6 from a pH-responsive BSA network crosslinked with genipin
Teimouri, S., Morrish, C., & Kasapis, S. (2020) · LWT · doi:10.1016/j.lwt.2020.109458 · Cited by 14
Two-Step Thermoresponsive Ultrafiltration Membranes from Polymerization of Lyotropic Liquid Crystals
Saadat, Y., Kim, K., & Foudazi, R. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c01095 · Cited by 15
Effect of Magnesium Salts with Chaotropic Anions on the Swelling Behavior of PNIPMAM Thin Films
Reitenbach, J., Geiger, C., Wang, P., Vagias, A., Cubitt, R., Schanzenbach, D., Laschewsky, A., Papadakis, C. M., & Müller‐Buschbaum, P. (2023) · Macromolecules · doi:10.1021/acs.macromol.2c02282 · Cited by 13
Ouaragli, J. E., Xiao, Z., Tao, M., Granados-Fócil, S., & Dessel, S. V. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105971 · Cited by 12
Use of Smart Materials in Physiotherapy
Verma, R., Akhai, S., & Wadhwa, A. S. (2024) · Advances in medical technologies and clinical practice book series · doi:10.4018/979-8-3693-2762-3.ch019 · Cited by 18
Romero-Fierro, D., Esquivel-Lozano, Y. A., Camacho-Cruz, A., & Bucio, E. (2023) · Cellulose · doi:10.1007/s10570-023-05561-6 · Cited by 12
“…have found diverse applications in some fields including biology and medicine, to the design and development of sensors and biosensors, in systems for environmental remediation and, especially in drug delivery systems (Liechty et al. 2010; Neamtu et al. 2017; Chatterjee and Chi-leung Hui 2019).”
BackgroundConducting polymer PEDOTs for biomedical application
Zhou, M., Zhu, L., An, S., & Chen, S. (2024) · Synthetic Metals · doi:10.1016/j.synthmet.2024.117700 · Cited by 13
Wan, L., Wang, M., Song, Y., Sun, G., Zhang, R., Chen, Z., Zhou, Y., Ma, K., Zheng, R., Gluchman, M., et al. (2025) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2025.107288 · Cited by 11
Polymeric Nanoparticles in Hybrid Catalytic Processing and Drug Delivery System
Rajan, R., Pal, K., Jayadev, D., Jayan, J. S., Aathira, U., Saritha, A., de Souza, F. G., Joseph, K., & Kumar, S. S. (2022) · Topics in Catalysis · doi:10.1007/s11244-022-01697-0 · Cited by 13
Drug delivery with melt-spun liquid-core fibers
Röthlisberger, M., Dul, S., Meier, P., Giovannini, G., Hufenus, R., & Perret, E. (2024) · Polymer · doi:10.1016/j.polymer.2024.126885 · Cited by 14
“Current research primarily focuses on developing smart stimuli-responsive textiles capable of releasing drugs on demand, triggered by external factors such as ultrasound, pH, temperature or electrical fields [2,10].”
Background
Metadata
- Authors
- CHATTERJEE, S., & Chi-leung HUI, P.
- Affiliations
- Hong Kong Polytechnic University (HK)
- Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Hong Kong
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2019-07-12
- Volume
- 24
- Issue
- 14
- Pages
- 2547
- ISSN
- 1420-3049 (ISSN-L)
- PMC
- PMC6681499
- OpenAlex
- W2958944148
- Cited by
- 201
- References
- 151
- Citations by year
- 2026: 22 · 2025: 27 · 2024: 35 · 2023: 32 · 2022: 24 · 2021: 34 · 2020: 24 · 2019: 3
- FWCI
- 1.42
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Molecules (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- PolyU Institutional Research Archive (Hong Kong Polytechnic University) (submittedVersion, cc-by)
- Funders
- Block Grant of the Faculty of Applied Science and Textiles, The Hong Kong Polytechnic University (1-ZVLM)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Pharmacology, Toxicology and Pharmaceutics › Pharmaceutical Science › Advanced Drug Delivery Systems
- Life Sciences › Agricultural and Biological Sciences › Agronomy and Crop Science › Polymer-Based Agricultural Enhancements
- Keywords
- stimuli-responsive polymers, drug delivery, textile applications, thermoresponsive polymers, pH-responsive polymers, chitosan, cellulose, albumin, gelatin, Pluronic F127, poly(N-isopropylacrylamide), atopic dermatitis, skin disease treatment
- MeSH terms
- Stimuli Responsive Polymers, Drug Carriers, Humans, Hydrogen-Ion Concentration, Structure-Activity Relationship, Temperature, Textiles, Drug Delivery Systems, Hydrogels
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.