Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application
Open accessThe DOI matches its Crossref record; 144 of the 151 references it cites were found in a registry or an index; 34 of the 69 sources its claims cite were checked for support.
Abstract
This review describes some commercially available stimuli-responsive polymers of natural and synthetic origin, and their applications in drug delivery and textiles. The polymers of natural origin such as chitosan, cellulose, albumin, and gelatin are found to show both thermo-responsive and pH-responsive properties and these features of the biopolymers impart sensitivity to act differently under different temperatures and pH conditions. The stimuli-responsive characters of these natural polymers have been discussed in the review, and their respective applications in drug delivery and textile especially for textile-based transdermal therapy have been emphasized. Some practically important thermo-responsive polymers such as pluronic F127 (PF127) and poly(N-isopropylacrylamide) (pNIPAAm) of synthetic origin have been discussed in the review and they are of great importance commercially because of their in situ gel formation capacity. Some pH-responsive synthetic polymers have been discussed depending on their surface charge, and their drug delivery and textile applications have been discussed in this review. The selected stimuli-responsive polymers of synthetic origin are commercially available. Above all, the applications of bio-based or synthetic stimuli-responsive polymers in textile-based transdermal therapy are given special regard apart from their general drug delivery applications. A special insight has been given for stimuli-responsive hydrogel drug delivery systems for textile-based transdermal therapy, which is critical for the treatment of skin disease atopic dermatitis.
Overview
CoChat Summary
## TL;DR
This review surveys commercially available stimuli-responsive polymers of natural and synthetic origin and summarizes their uses in drug delivery and textile-based transdermal therapy. It emphasizes that natural polymers such as chitosan, cellulose, albumin, and gelatin can be both thermo- and pH-responsive, while synthetic systems like PF127 and pNIPAAm are especially important for in situ gel formation.
## Key findings
- Natural polymers highlighted in the review — chitosan, cellulose, albumin, and gelatin — are described as showing both thermo-responsive and pH-responsive behavior, making them useful for drug delivery and textile-based transdermal therapy.
- Synthetic thermo-responsive polymers PF127 and pNIPAAm are described as widely used because they can form gels near body temperature, especially around 37 °C.
- The review states that PF127-based thermo-responsive hydrogels have been applied in textile-based transdermal therapy for atopic dermatitis, including systems loaded with traditional Chinese medicine and moisture.
- pH-responsive polymers such as PEG, PAA, PDMAEMA, and PDEAEMA are presented as useful for oral, colon-targeted, and transdermal drug delivery, with applications shaped by whether they swell in acidic or basic conditions.
## Methods
- Not an experimental study; this is a narrative review of stimuli-responsive polymers and their reported biomedical applications.
- The paper compiles examples from the literature on natural and synthetic polymers, including drug delivery and textile applications.
- The main analysis is descriptive: it categorizes polymers by stimulus response (temperature, pH, sometimes light/redox) and summarizes reported uses and performance claims from prior studies.
## Limitations
- The paper states that textile-based transdermal therapy needs further and more extensive research because skin pH and temperature vary with physiological state.
- The paper states that stability on skin is a major hurdle, noting that some thermo-responsive hydrogels, such as PF127, can disintegrate under acidic conditions and that skin pH around 5.5 may destabilize PF127-based hydrogel systems.
- Evident from the text: the review is largely a compilation of examples and does not report new experiments, datasets, or quantitative head-to-head comparisons of the polymers discussed.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
24 Valid · 1 Not valid · 12 Not checked · 7 Own results and interpretations
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“The recent focus on functional polymers mostly centers around stimuli-responsive polymers and these polymers have attracted great attention since these can show sol-gel transitions in response to external triggers like temperature, pH, and light [20,21].”
§ Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application > 1. Introduction Hydrogels are three-dimensional polymeric networks made up of the same or different hydrophilic polymers and contain large amounts of water in their structure [1,2,3]. The polymeric backbone with hydrophilic functional groups hold a large amount of water in the structure and crosslinking network formed by polymeric chains, which resists its dissolution in water [4,5]. Hydrogels exhibit the ability to swell and possess some degree of flexibilities, which are very similar to the natural tissue due to their large water content. The compactness of hydrogels in aqueous media is maintained by physical cross-linking (e.g., entanglements, crystallites) and, also, chemical cross-linking [6,7]. Hydrogels widely vary in their composition, chemical structure, biodegradability, and various physio-chemical properties such as spectral and mechanical properties, pH stability, and, depending on all such factors, their biological function and performances vary in multiple dimensions [8,9,10]. Hydrogels resemble some physical properties of living tissues such as high-water content, compactness, and low interfacial tension with aqueous media, and those properties of hydrogels impart their great applicability in the bio-medical field, especially for drug delivery [11,12,13,14]. The biomedical applications of hydrogels including drug delivery, tissue engineering, clinical bandages, and biosensors come in the form of film/film forming systems, micro/nano-sphere, matrix, nanoparticles, and nanocomposites depending on the chemical composition and processing parameters of hydrogels [15,16,17,18]. The suitable use of hydrogels for delivering drugs can be upgraded by modifying their transport properties for drugs and also by chemical modification [4,19]. The recent focus on functional polymers mostly centers around stimuli-responsive polymers and these polymers have attracted great attention since these can show sol-gel transitions in response to external triggers like temperature, pH, and light [20,21]. Moreover, the physical changes in stimuli-responsive polymers are reversible and they are capable of returning to their initial state after the trigger is removed [21]. In recent years, there has been a remarkable growth in the development of stimuli-responsive polymer-based drug delivery systems with sustained and controlled drug release properties [22,23]. The important feature of stimuli-responsive polymers is the critical solution temperature (CST), which can be defined as a critical temperature at which the polymeric solution shows a phase separation, which moves from the isotropic state to the anisotropic state [21]. The polymer with lower critical solution temperature (LCST) shows the solution phase below CST and becomes insoluble or forms hydrogels over CST with heating [20]. The LSCT can be defined as a critical temperature at which the polymeric solution shows a phase separation, which moves from the isotropic state to the anisotropic state [21]. The polymers with LCST are mostly used for developing drug delivery systems [22]. Stimuli-responsive gelling materials constructed from natural and synthetic polymers are successfully used to develop drug delivery systems and regenerative medicine products because of their triggered actions in response to external stimuli [24,25,26]. The hydrogels made of stimuli-responsive polymers can show some physical changes like porosity, swelling with external stimuli, and the switchable physical properties provide huge and wide-spread biomedical applications of these polymers [27,28]. Thermo-responsive polymers show sol-gel transitions with a change in temperature of the external environment and hydrogels made of thermoresponsive polymers find tremendous drug delivery applications through simple chemical modifications [29,30,31,32], and some thermoresponsive polymers are capable of forming hydrogel near body temperature [33,34]. A part of thermoresponsive polymers show Arrhenius-type viscosity changes based on coil to globule transitions and others show enthalpic or entropic driven sol-gel transition [22,24]. The synthetic thermoresponsive polymers mainly poly(N-isopropylacrylamide) (pNIPAAm) and pluronic F127 (PF127) are widely used for drug delivery applications since they can form gels near the body temperature of 37 °C [35,36,37]. The stimuli-responsive behavior of thermoresponsive polymers has been schematized in Figure 1 and this diagram of the thermoresponsive polymer having LCST shows sol-gel transition with the temperature. The phase change of thermoresponsive polymers in Figure 2 has been shown to be reversible where the polymer chains form hydrogel above LCST and the polymer chains are found to be in close proximity encapsulating a drug within it. The hydrogel reverts back to the sol phase when the temperature is below LCST and the polymers are soluble in the solvent mixture with no encapsulated drug (Figure 2). The swelling-shrinking behavior of pH-responsive polymers in response to an external pH condition makes them suitable for drug delivery applications [38,39,40]. The cationic pH responsive polymers including chitosan, poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), and poly(N,N-diethylaminoethyl methacrylate) (PDEAEMA) swell in acidic pH and shrink in basic pH, where the basic pH-responsive polymers such as albumin and polyacrylic acid (PAA) swell in basic pH and shrink in acidic pH [41,42]. The stimuli-responsive behavior of pH-responsive polymers has been presented in Figure 2 and this schematic diagram of pH-responsive hydrogels gives an idea about the sensitivity of pH-responsive polymers toward different external pH conditions. As shown in Figure 2, depending on the charge groups of pH-responsive polymers, their hydrogels are found to change their swollen/shrinkage state in response to external pH of the media. Textile-based transdermal therapy using drug loaded hydrogels made of stimuli-responsive polymers has become an effective means of skin care [35,43,44,45]. Wang et al. [43,44] developed PF127-based thermo-responsive hydrogels to load water soluble traditional Chinese drug Cortex moutan, which has been reported to be effective against pathogenesis related to atopic dermatitis and the transdermal therapy using their system seems to be an effective means to fight against this disease using smart textiles. The functionalized textiles coated with stimuli-responsive hydrogel can balance moisture on the skin and give comfort by actively balancing body temperature [46,47]. The functionalized textiles coated with stimuli-responsive hydrogels are enriched with soft display, aesthetic appeal, and improved wetting properties [48,49,50]. In this review, the drug delivery and textile applications of various stimuli-responsive polymers have been considered. The textile applications of stimuli-responsible polymers mainly focus on textile based transdermal therapy where drugs and moisture are simultaneously transferred to infected sites on the skin. The whole review has been divided into two parts: drug delivery and textile applications of natural stimuli-responsive polymers including chitosan, albumin, cellulose, gelatin, and those of synthetic polymers including PF127, pNIPAAm, poly(ethylene glycol) (PEG), polyacrylic acid (PAA), and poly(dimethylaminoethyl methacrylate) (PDMAEMA) and poly(diethylaminoethyl methacrylate) (PDEAEMA). Figure 3 highlights the main objective of the study and outlines the properties of stimuli-responsive polymers of biological and synthetic origin, and their biomedical applications in brief. The chemical structure of natural polymers are given in Figure 4. Figure 5 depicts the chemical structure of all synthetic polymers described in this case. The natural polymers are capable of showing both thermo-responsive and pH-responsive properties as well as simple chemical modifications and composite formation with other polymers are applied to increase and improve their biomedical applications especially for drug delivery. Synthetic thermo-responsive polymers are well recognized for their in situ gel forming ability. Their simple chemical modifications and composite formations are applied using other polymers of natural or synthetic origin to increase their biocompatibility and reduce toxicity. The chemical nature, type of stimuli-responsiveness, and biomedical applications of all stimuli-responsive polymers are described in Table 1.
What the sources say
- Supportedcites [20] Koetting, 2015, Stimulus-responsive hydrogels: Theory, modern advances, and applications, Mater. Sci. Eng. source
Section 8.1 explicitly describes a sol–gel transition in temperature-responsive gels. Section 8.2 reports that lowering pH increases silk fibroin gelation rates, and Section 6.2 describes light-triggered switching from solution to gel. These examples support the claim that such transitions can occur in response to temperature, pH, and light; page numbers are not available in our copy. (LLM, conf=0.88)
- Not checked — no full text of the sourcecites [21] Jeong, 2000, Thermogelling biodegradable polymers with hydrophilic backbones: PEG-g-PLGA, Macromolecules source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The carbomethyl cellulose, which is another functional derivative of cellulose, is capable of forming thermo-responsive hydrogel.”
§ Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application > 2. Natural Stimuli-Responsive Polymers > 2.2. Cellulose Cellulose, which is the most abundant natural polymer on earth, is made up of glucose monomers and capable of forming hydrogel using their functional hydroxyl groups [65,66]. Methylcellulose, which is the functional material developed from cellulose, is water soluble and can show a thermo-responsive property with the sol-gel transition in the temperature range of 60 to 80 °C [24,67]. The thermo-responsive hydrogel made from pNIPAAm and methylcellulose showed gel formation near the body temperature and the mechanical strength of the hydrogel was improved [68]. The thermo-responsive hydrogel from methylcellulose and PF127 was used as a drug delivery system for anti-cancer drug docetaxel and the system showed more sustained drug release than free docetaxel [69]. The thermo-responsive hydrogel from kappa-carrageenan and methylcellulose showed double thermal gel-sol-gel transition upon heating and was used for developing the drug delivery system [70]. The injectable bone substitute was prepared from the thermo-responsive hydrogel of methylcellulose, gelatin, and citric acid with a bio-ceramic powder loaded into it [71]. The injectable thermosensitive hydrogel from methylcellulose and chitosan was applied for tissue engineering and showed sol-gel transition near the body temperature of 37 °C [72]. The carbomethyl cellulose, which is another functional derivative of cellulose, is capable of forming thermo-responsive hydrogel. The drug delivery system formed from carboxymethyl cellulose and gelatin showed sol-gel transition near the body temperature and was used for transdermal drug therapy with lidocaine [73]. The thermo-responsive hydrogel formed from carboxymethyl cellulose sodium and Poloxamer 407 was used as the drug delivery system for Chinese herbal medicine in textile-based transdermal therapy [43,44]. The hydrogel system with traditional Chinese medicine was mainly applied for the treatment of atopic dermatitis and the hydrogel with thermo-responsive property is capable of showing sol-gel transition near a body temperature of 37 °C [43,44]. The stimuli-responsive hydrogels made from cellulose have been becoming popular for the last few years due to their biocompatibility and non-toxicity. The pH-responsive hydrogel of cellulose was developed by simply mixing aqueous solutions of cellulose acetoacetate and cystamine dihydrochloride at room temperature and, moreover, this cellulose-based hydrogel showed dual responsiveness via reversible sol-gel transitions in response to both pH and redox triggers [74]. The cellulose-based hydrogels after epichlorohydrin mediated cross-linking of quaternized cellulose and carboxymethyl cellulose showed a pH responsive property along with salt responsiveness and the mass ratio of two cellulose-based compounds in the composites was varied to compare their pH and salt responsiveness [75]. These cellulose-based hydrogels are reported to have various biomedical applications including drug delivery and tissue engineering [75]. The hydrogel system made of carboxymethyl cellulose and pNIPAAm showed the pH-responsive character along with thermo and redox responsiveness [76]. The multi-responsive hydrogel was used as a drug delivery system for lysozyme and the release of lysozyme from the system was studied at a different pH, temperature, and redox environments to ensure its maximum effective drug delivery applications [76]. The pH-responsive hydrogel made of hydroxyethyl cellulose and hyaluronic acid was used as a drug delivery system for the treatment of skin lesions and this transdermal drug delivery system loaded with isoliquiritigenin was found to be effective for the treatment of acne since it showed excellent permeability in the skin [77].
What the sources say
- Partly supportedcites [73] Nayak, 2016, Lidocaine carboxymethylcellulose with gelatine co-polymer hydrogel delivery by combined microneedle and ultrasound, Drug Deliv. sourceExperimental — accuracy not yet measured
The Materials and methods section says sodium carboxymethylcellulose was cross-linked with gelatin to form a hydrogel. The Formulation section describes cooling the mixture to harden microparticles, but neither section establishes that the resulting hydrogel is thermo-responsive. Page numbers are unavailable in our copy. (LLM, conf=0.82)
- Partly supportedcites [43] Wang, 2016, Dual-functional transdermal drug delivery system with controllable drug loading based on thermosensitive poloxamer hydrogel for atopic dermatitis treatment, Sci. Rep. UK sourceExperimental — accuracy not yet measured
The Methods (Materials; Preparation of P407/CMCs composite hydrogel, pages unavailable) identify CMCs as carboxymethyl cellulose sodium and describe adding it to poloxamer 407 to make a composite hydrogel. The Results (Phase transition analysis, page unavailable) show that the composite is thermo-responsive, but do not establish that carboxymethyl cellulose forms a thermo-responsive hydrogel on its own. (LLM, conf=0.86)
- Partly supportedcites [44] Wang, W., Hui, P.C.L., Wat, E., Chan, B., Ng, F.S.F., Kan, C.-W., Lau, C.B.S., and Leung, P.-C. (2016). Enhanced transdermal permeability via constructing the porous structure of poloxamer-based hydrogel. Polymers-Basel, 8. sourceExperimental — accuracy not yet measured
The Introduction identifies poloxamer 407 as the thermosensitive polymer and says carboxymethyl cellulose sodium (CMCs) was added to reinforce and regulate the poloxamer matrix. The Results (section 3.1; page unavailable) show that the P407/CMCs composite has a gelation transition temperature, but the paper does not establish that CMC itself can form a thermoresponsive hydrogel. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The anionic hydrogel forming albumin can show pH-responsiveness by swelling in basic pH medium and shrinking in acidic pH [27,81].”
§ Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application > 2. Natural Stimuli-Responsive Polymers > 2.3. Albumin
What the sources say
- Partly supportedcites [27] Sood, 2016, Stimuli-responsive hydrogels in drug delivery and tissue engineering, Drug Deliv. sourceExperimental — accuracy not yet measured
The pH-sensitive or ion-sensitive hydrogels section says an anionic polymer, polyacrylic acid, swells more at high pH, supporting the general pH-response pattern. It does not identify albumin as that polymer or establish that albumin hydrogels swell in basic conditions and shrink in acidic conditions (searched: albumin; albumin hydrogel swelling acidic basic pH). (LLM, conf=0.84)
- Partly supportedcites [81] Raja, 2015, pH and redox sensitive albumin hydrogel: A self-derived biomaterial, Sci. Rep. UK. sourceExperimental — accuracy not yet measured
The Abstract reports maximum swelling at alkaline pH, supporting the basic-pH part of the claim. But the Results and Discussion report a five- to eight-fold weight increase at acidic pH 2.0, not shrinking in acidic conditions. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The synthetic thermoresponsive polymers mainly poly(N-isopropylacrylamide) (pNIPAAm) and pluronic F127 (PF127) are widely used for drug delivery applications since they can form gels near the body temperature of 37 °C [35,36,37].”
§ Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application > 1. Introduction Hydrogels are three-dimensional polymeric networks made up of the same or different hydrophilic polymers and contain large amounts of water in their structure [1,2,3]. The polymeric backbone with hydrophilic functional groups hold a large amount of water in the structure and crosslinking network formed by polymeric chains, which resists its dissolution in water [4,5]. Hydrogels exhibit the ability to swell and possess some degree of flexibilities, which are very similar to the natural tissue due to their large water content. The compactness of hydrogels in aqueous media is maintained by physical cross-linking (e.g., entanglements, crystallites) and, also, chemical cross-linking [6,7]. Hydrogels widely vary in their composition, chemical structure, biodegradability, and various physio-chemical properties such as spectral and mechanical properties, pH stability, and, depending on all such factors, their biological function and performances vary in multiple dimensions [8,9,10]. Hydrogels resemble some physical properties of living tissues such as high-water content, compactness, and low interfacial tension with aqueous media, and those properties of hydrogels impart their great applicability in the bio-medical field, especially for drug delivery [11,12,13,14]. The biomedical applications of hydrogels including drug delivery, tissue engineering, clinical bandages, and biosensors come in the form of film/film forming systems, micro/nano-sphere, matrix, nanoparticles, and nanocomposites depending on the chemical composition and processing parameters of hydrogels [15,16,17,18]. The suitable use of hydrogels for delivering drugs can be upgraded by modifying their transport properties for drugs and also by chemical modification [4,19]. The recent focus on functional polymers mostly centers around stimuli-responsive polymers and these polymers have attracted great attention since these can show sol-gel transitions in response to external triggers like temperature, pH, and light [20,21]. Moreover, the physical changes in stimuli-responsive polymers are reversible and they are capable of returning to their initial state after the trigger is removed [21]. In recent years, there has been a remarkable growth in the development of stimuli-responsive polymer-based drug delivery systems with sustained and controlled drug release properties [22,23]. The important feature of stimuli-responsive polymers is the critical solution temperature (CST), which can be defined as a critical temperature at which the polymeric solution shows a phase separation, which moves from the isotropic state to the anisotropic state [21]. The polymer with lower critical solution temperature (LCST) shows the solution phase below CST and becomes insoluble or forms hydrogels over CST with heating [20]. The LSCT can be defined as a critical temperature at which the polymeric solution shows a phase separation, which moves from the isotropic state to the anisotropic state [21]. The polymers with LCST are mostly used for developing drug delivery systems [22]. Stimuli-responsive gelling materials constructed from natural and synthetic polymers are successfully used to develop drug delivery systems and regenerative medicine products because of their triggered actions in response to external stimuli [24,25,26]. The hydrogels made of stimuli-responsive polymers can show some physical changes like porosity, swelling with external stimuli, and the switchable physical properties provide huge and wide-spread biomedical applications of these polymers [27,28]. Thermo-responsive polymers show sol-gel transitions with a change in temperature of the external environment and hydrogels made of thermoresponsive polymers find tremendous drug delivery applications through simple chemical modifications [29,30,31,32], and some thermoresponsive polymers are capable of forming hydrogel near body temperature [33,34]. A part of thermoresponsive polymers show Arrhenius-type viscosity changes based on coil to globule transitions and others show enthalpic or entropic driven sol-gel transition [22,24]. The synthetic thermoresponsive polymers mainly poly(N-isopropylacrylamide) (pNIPAAm) and pluronic F127 (PF127) are widely used for drug delivery applications since they can form gels near the body temperature of 37 °C [35,36,37]. The stimuli-responsive behavior of thermoresponsive polymers has been schematized in Figure 1 and this diagram of the thermoresponsive polymer having LCST shows sol-gel transition with the temperature. The phase change of thermoresponsive polymers in Figure 2 has been shown to be reversible where the polymer chains form hydrogel above LCST and the polymer chains are found to be in close proximity encapsulating a drug within it. The hydrogel reverts back to the sol phase when the temperature is below LCST and the polymers are soluble in the solvent mixture with no encapsulated drug (Figure 2). The swelling-shrinking behavior of pH-responsive polymers in response to an external pH condition makes them suitable for drug delivery applications [38,39,40]. The cationic pH responsive polymers including chitosan, poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), and poly(N,N-diethylaminoethyl methacrylate) (PDEAEMA) swell in acidic pH and shrink in basic pH, where the basic pH-responsive polymers such as albumin and polyacrylic acid (PAA) swell in basic pH and shrink in acidic pH [41,42]. The stimuli-responsive behavior of pH-responsive polymers has been presented in Figure 2 and this schematic diagram of pH-responsive hydrogels gives an idea about the sensitivity of pH-responsive polymers toward different external pH conditions. As shown in Figure 2, depending on the charge groups of pH-responsive polymers, their hydrogels are found to change their swollen/shrinkage state in response to external pH of the media. Textile-based transdermal therapy using drug loaded hydrogels made of stimuli-responsive polymers has become an effective means of skin care [35,43,44,45]. Wang et al. [43,44] developed PF127-based thermo-responsive hydrogels to load water soluble traditional Chinese drug Cortex moutan, which has been reported to be effective against pathogenesis related to atopic dermatitis and the transdermal therapy using their system seems to be an effective means to fight against this disease using smart textiles. The functionalized textiles coated with stimuli-responsive hydrogel can balance moisture on the skin and give comfort by actively balancing body temperature [46,47]. The functionalized textiles coated with stimuli-responsive hydrogels are enriched with soft display, aesthetic appeal, and improved wetting properties [48,49,50]. In this review, the drug delivery and textile applications of various stimuli-responsive polymers have been considered. The textile applications of stimuli-responsible polymers mainly focus on textile based transdermal therapy where drugs and moisture are simultaneously transferred to infected sites on the skin. The whole review has been divided into two parts: drug delivery and textile applications of natural stimuli-responsive polymers including chitosan, albumin, cellulose, gelatin, and those of synthetic polymers including PF127, pNIPAAm, poly(ethylene glycol) (PEG), polyacrylic acid (PAA), and poly(dimethylaminoethyl methacrylate) (PDMAEMA) and poly(diethylaminoethyl methacrylate) (PDEAEMA). Figure 3 highlights the main objective of the study and outlines the properties of stimuli-responsive polymers of biological and synthetic origin, and their biomedical applications in brief. The chemical structure of natural polymers are given in Figure 4. Figure 5 depicts the chemical structure of all synthetic polymers described in this case. The natural polymers are capable of showing both thermo-responsive and pH-responsive properties as well as simple chemical modifications and composite formation with other polymers are applied to increase and improve their biomedical applications especially for drug delivery. Synthetic thermo-responsive polymers are well recognized for their in situ gel forming ability. Their simple chemical modifications and composite formations are applied using other polymers of natural or synthetic origin to increase their biocompatibility and reduce toxicity. The chemical nature, type of stimuli-responsiveness, and biomedical applications of all stimuli-responsive polymers are described in Table 1.
What the sources say
- Partly supportedcites [35] Chatterjee, S., Hui, P.C.-l., and Kan, C.-W. (2018). Thermoresponsive hydrogels and their biomedical applications: Special insight into their applications in textile based transdermal therapy. Polymers-Basel, 10. sourceExperimental — accuracy not yet measured
Section 3.1 describes pNIPAAm as extensively studied for drug delivery and reports gelation around 32 °C, close to body temperature. Sections 3.2 and 4 describe PF127 drug-delivery applications and sol–gel transition near body temperature. But Section 4 says concerns about pNIPAAm hydrogels have largely prevented their use in real drug-delivery systems, so the claim that both are widely used overstates the source. (LLM, conf=0.85)
- Not checked — no full text of the sourcecites [36] Bajpai, 2008, Responsive polymers in controlled drug delivery, Prog. Polym. Sci. source
- Partly supportedcites [37] Tang, 2017, Synthesis and characterization of thermoresponsive hydrogels Based on N-Isopropylacrylamide crosslinked with 4,4′-dihydroxybiphenyl diacrylate, ACS Omega sourceExperimental — accuracy not yet measured
The Introduction (page not provided) describes NIPAAm-based hydrogels as useful for drug delivery and says biomedical applications often require a transition temperature near body temperature. It gives their typical transition temperature as 32 °C, however, and does not discuss PF127 or establish that either polymer forms gels near 37 °C. (LLM, conf=0.85)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“For last few years, the potential drug delivery applications of PF127-based systems have been emerging for transdermal therapy [35].”
§ Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application > 3. Synthetic Stimuli-Responsive Polymers > 3.1. Pluronic F127 Pluronic F127 (PF127) is a non-ionic triblock copolymer of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) and, being a thremo-responsive synthetic polymer, PF127 can form the hydrogel near the body temperature [35,95]. PF127 is approved by the ‘U.S. Food and Drug Administration’ (FDA) to be used in biomedical areas especially for drug delivery, tissue engineering, and the administration of the PF127-based drug delivery system, which can be oral, ocular, intranasal, subcutaneous, vaginal, and rectal [95]. For last few years, the potential drug delivery applications of PF127-based systems have been emerging for transdermal therapy [35]. The thermo-responsive hydrogel made of PF127 and hyaluronic acid showed gel formation at a body temperature of 37 °C and was used as a drug delivery system for a human growth hormone [96]. The thermo-responsive hydrogel made of hyaluronic acid grafted PF127 showed in situ gel formation and was applied for delivery of model anti-cancer drugs cisplatin and carboplatin [97]. The drug delivery system made from thermo-responsive hydrogel of glycol chitosan and PF127 by photo-polymerization was applied for delivery of doxorubicin [98]. The biodegradable thermo-responsive composite hydrogel made of PF127 and PEG-poly(ε-caprolactone)-PEG copolymer was applied as a drug delivery system for model drugs Vitamin B12, honokiol, and BSA and the hydrogel showed sol-gel transition at the body temperature [99]. The thermo-responsive hydrogel made from chitosan and PF-127 was applied as a drug delivery system for model anti-cancer drug 5-fluorouracil [100]. The hydrogel system made of PF127 and Pluronic F68 was evaluated for in situ hydrogel formation under physiological conditions and the hydrogel made of PF127 (20 wt%) was found to be capable of forming hydrogel under a physiological condition. However, the addition of Pluronic F68 to PF127 enhanced the gelation temperature and could not form hydrogels under physiological condition [101]. This thermo-responsive hydrogel was applied for ocular drug delivery [101]. The thermo-responsive hydrogel made of PF127 and alginate was applied as a drug delivery system of a model drug selegeline for transdermal therapy. The drug delivery system showed sustained and controlled release of selegeline [102]. The PF127-based thermo-responsive hydrogels were used in textile-based transdermal therapy for the treatment of AD. The hydrogels made of PF127 and carboxymethyl cellulose sodium were loaded with Chinese herbal medicine to deliver moisture and drugs simultaneously to infected sites on the skin [43,44].
What the sources say
- Supportedcites [35] Chatterjee, S., Hui, P.C.-l., and Kan, C.-W. (2018). Thermoresponsive hydrogels and their biomedical applications: Special insight into their applications in textile based transdermal therapy. Polymers-Basel, 10. source
Section 3.2, “Pluronics or Poloxamers,” explicitly says PF127-based hydrogels are applied for transdermal drug delivery and describes their use in textile-based transdermal therapy. This supports the claim that PF127-based systems have potential drug-delivery applications in that setting. (LLM, conf=0.92)
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
14 more claims · 9 with their cited sources checked
Create a free account to see all 44 claims and every source verdict.
- Probably not a substantial claim. 6
- It may state two separate claims as one. 20
Citations
Cites
Hydrogel: Preparation, characterization, and applications: A review
Ahmed, E. M. (2015) · Journal of Advanced Research · doi:10.1016/j.jare.2013.07.006 · Cited by 5,800 · cited 2×
“The suitable use of hydrogels for delivering drugs can be upgraded by modifying their transport properties for drugs and also by chemical modification [4,19].”
BackgroundMethodHydrogels for biomedical applications
Hoffman, A. S. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00239-3 · Cited by 4,864
Designing hydrogels for controlled drug delivery
Li, J., & Mooney, D. J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.71 · Cited by 4,832
Hydrogels in drug delivery: Progress and challenges
Hoare, T. R., & Kohane, D. S. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.027 · Cited by 3,776 · cited 1×
“The suitable use of hydrogels for delivering drugs can be upgraded by modifying their transport properties for drugs and also by chemical modification [4,19].”
MethodHydrophilic gels for biological use
WICHTERLE, O., & LÍM, D. (1960) · Nature · doi:10.1038/185117a0 · Cited by 2,996
Biomedical applications of hydrogels: A review of patents and commercial products
Caló, E., & Khutoryanskiy, V. V. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.11.024 · Cited by 2,634
Hydrogels: From controlled release to pH-responsive drug delivery
Gupta, P., Vermani, K., & Garg, S. (2002) · Drug Discovery Today · doi:10.1016/s1359-6446(02)02255-9 · Cited by 1,825 · cited 1×
“The cationic pH responsive polymers including chitosan, poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), and poly(N,N-diethylaminoethyl methacrylate) (PDEAEMA) swell in acidic pH and shrink in basic pH, where the basic pH-responsive polymers such as albumin and polyacrylic acid (PAA) swell in basic pH and shrink i…”
BackgroundKamoun, E. A., Kenawy, E.-R. S., & Chen, X. (2017) · Journal of Advanced Research · doi:10.1016/j.jare.2017.01.005 · Cited by 1,707
Thermosensitive sol-gel reversible hydrogels
Jeong, B., Kim, S. W., & Bae, Y. H. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00242-3 · Cited by 1,478
Responsive polymers in controlled drug delivery
Bajpai, A. K., Shukla, S. K., Bhanu, S., & Kankane, S. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.005 · Cited by 1,391
Thermoresponsive hydrogels in biomedical applications
Klouda, L., & Mikos, A. G. (2008) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.02.025 · Cited by 1,349 · cited 5×
“pNIPAAm is the mostly studied and FDA-approved, widely applied thermo-responsive polymer for drug delivery applications [24,104,105].”
BackgroundInfluentialIn situ-forming hydrogels--review of temperature-sensitive systems
Ruel-Gariépy, E., & Leroux, J.-C. (2004) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2004.03.019 · Cited by 1,297 · cited 1×
“Thermo-responsive polymers show sol-gel transitions with a change in temperature of the external environment and hydrogels made of thermoresponsive polymers find tremendous drug delivery applications through simple chemical modifications [29–32], and some thermoresponsive polymers are capable of forming hydrogel near…”
BackgroundStimulus-responsive hydrogels: theory, modern advances, and applications
Koetting, M. C., Peters, J. T., Steichen, S. D., & Peppas, N. A. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.04.001 · Cited by 1,191 · cited 2×
“The polymer with lower critical solution temperature (LCST) shows the solution phase below CST and becomes insoluble or forms hydrogels over CST with heating [20].”
BackgroundCellulose-based hydrogels: Present status and application prospects
Chang, C., & Zhang, L. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.12.023 · Cited by 1,081 · cited 1×
“Cellulose, which is the most abundant natural polymer on earth, is made up of glucose monomers and capable of forming hydrogel using their functional hydroxyl groups [65,66].”
BackgroundHydrogels for Biomedical Applications: Their Characteristics and the Mechanisms behind Them
Chai, Q., Jiao, Y., & Yu, X. (2017) · Gels · doi:10.3390/gels3010006 · Cited by 1,072
Hydrogels in a historical perspective: From simple networks to smart materials
Buwalda, S. J., Boere, K. W. M., Dijkstra, P. J., Feijen, J., Vermonden, T., & Hennink, W. E. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.03.052 · Cited by 994 · cited 1×
“, entanglements, crystallites) and, also, chemical cross-linking [6,7].”
Design and applications of interpenetrating polymer network hydrogels. A review
Dragan, E. S. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.01.065 · Cited by 992
Stimuli-responsive polymers: Biomedical applications and challenges for clinical translation
Hoffman, A. S. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.11.004 · Cited by 759
Hydrogels and Their Applications in Targeted Drug Delivery
Narayanaswamy, R., & Torchilin, V. P. (2019) · Molecules · doi:10.3390/molecules24030603 · Cited by 664
A review of stimuli-responsive polymers for smart textile applications
Hu, J., Meng, H., Li, G., & Ibekwe, S. I. (2012) · Smart Materials and Structures · doi:10.1088/0964-1726/21/5/053001 · Cited by 639
Hydrogels for Biomedical Applications
HOFFMAN, A. S. (2001) · Annals of the New York Academy of Sciences · doi:10.1111/j.1749-6632.2001.tb03823.x · Cited by 579
A mini review on hydrogels classification and recent developments in miscellaneous applications
Varaprasad, K., Raghavendra, G. M., Jayaramudu, T., Yallapu, M. M., & Sadiku, R. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.096 · Cited by 534
Studies on thermoresponsive polymers: Phase behaviour, drug delivery and biomedical applications
Gandhi, A., Paul, A., Sen, S. O., & Sen, K. K. (2015) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2014.08.010 · Cited by 506
The pH-responsive behaviour of poly(acrylic acid) in aqueous solution is dependent on molar mass
Swift, T., Swanson, L., Geoghegan, M., & Rimmer, S. (2016) · Soft Matter · doi:10.1039/c5sm02693h · Cited by 455 · cited 1×
“Polyacrylic acid (PAA), which is an anionic synthetic compound, can form pH-responsive hydrogel, swells/dissolves at pH higher than its pKa, and remains collapsed at acidic pH (pH < pKa) [123].”
BackgroundStimuli-responsive hydrogels in drug delivery and tissue engineering
Sood, N., Bhardwaj, A., Mehta, S., & Mehta, A. (2016) · Drug Delivery · doi:10.3109/10717544.2014.940091 · Cited by 426 · cited 2×
“The anionic hydrogel forming albumin can show pH-responsiveness by swelling in basic pH medium and shrinking in acidic pH [27,81].”
BackgroundpH-Responsive carriers for oral drug delivery: Challenges and opportunities of current platforms
Liu, L., Yao, W., Rao, Y., Lu, X., & Gao, J. (2017) · Drug Delivery · doi:10.1080/10717544.2017.1279238 · Cited by 420 · cited 1×
“The pH-responsive anionic hydrogels made of PAA can protect drugs from degradation and denaturation at a low pH of gastric juice and release drugs in specific locations, such as the upper small intestine and colon [125].”
BackgroundYin, X., Hoffman, A. S., & Stayton, P. S. (2006) · Biomacromolecules · doi:10.1021/bm0507812 · Cited by 416 · cited 1×
“The hydrogel system also showed a pH-responsive property [107].”
BackgroundPatel, V. R., & Amiji, M. M. (1996) · Pharmaceutical Research · doi:10.1023/a:1016054306763 · Cited by 397 · cited 1×
“The pH-responsive hydrogel network was found to release more drugs in simulated gastric fluid than simulated intestinal fluid [62].”
BackgroundRecent progress in biomedical applications of pluronic (PF127): Pharmaceutical perspectives
Akash, M. S. H., & Rehman, K. (2015) · Journal of Controlled Release · doi:10.1016/j.jconrel.2015.04.032 · Cited by 394 · cited 2×
“Pluronic F127 (PF127) is a non-ionic triblock copolymer of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) and, being a thremo-responsive synthetic polymer, PF127 can form the hydrogel near the body temperature [35,95].”
BackgroundStimulus responsive nanogels for drug delivery
Zha, L., Banik, B., & Alexis, F. (2011) · Soft Matter · doi:10.1039/c0sm01307b · Cited by 391
pH- and ion-sensitive polymers for drug delivery
Yoshida, T., Lai, T. C., Kwon, G. S., & Sako, K. (2013) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2013.821978 · Cited by 367 · cited 1×
“The cationic pH responsive polymers including chitosan, poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), and poly(N,N-diethylaminoethyl methacrylate) (PDEAEMA) swell in acidic pH and shrink in basic pH, where the basic pH-responsive polymers such as albumin and polyacrylic acid (PAA) swell in basic pH and shrink i…”
BackgroundRaza, A., Rasheed, T., Nabeel, F., Hayat, U., Bilal, M., & Iqbal, H. M. N. (2019) · Molecules · doi:10.3390/molecules24061117 · Cited by 367 · cited 1×
“In recent years, there has been a remarkable growth in the development of stimuli-responsive polymer-based drug delivery systems with sustained and controlled drug release properties [22,23].”
BackgroundA review on tough and sticky hydrogels
Peak, C. W., Wilker, J. J., & Schmidt, G. (2013) · Colloid and Polymer Science · doi:10.1007/s00396-013-3021-y · Cited by 364
Therapeutic applications of hydrogels in oral drug delivery
Sharpe, L. A., Daily, A. M., Horava, S. D., & Peppas, N. A. (2014) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2014.902047 · Cited by 354
Park, K. M., Lee, S. Y., Joung, Y. K., Na, J. S., Lee, M. C., & Park, K. D. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.01.040 · Cited by 346 · cited 1×
“The thermo-responsive hydrogel made by grafting pluronic onto chitosan was used as an injectable cell delivery system for cartilage regeneration [55].”
MethodSwelling Behaviors of pH- and Salt-Responsive Cellulose-Based Hydrogels
Chang, C., He, M., Zhou, J., & Zhang, L. (2011) · Macromolecules · doi:10.1021/ma102801f · Cited by 300 · cited 2×
“These cellulose-based hydrogels are reported to have various biomedical applications including drug delivery and tissue engineering [75].”
BackgroundIn situ gelling systems based on Pluronic F127/Pluronic F68 formulations for ocular drug delivery
Al Khateb, K., Ozhmukhametova, E. K., Mussin, M. N., Seilkhanov, S. K., Rakhypbekov, T. K., Lau, W. M., & Khutoryanskiy, V. V. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.02.027 · Cited by 281
Responsive reversible hydrogels from associative “smart” macromolecules
Tsitsilianis, C. (2010) · Soft Matter · doi:10.1039/b923947b · Cited by 278
Thermally induced association and dissociation of methylcellulose in aqueous solutions
Li, L., Shan, H., Yue, C. Y., Lam, Y. C., Tam, K. C., & Hu, X. (2002) · Langmuir · doi:10.1021/la020029b · Cited by 247 · cited 1×
“Methylcellulose, which is the functional material developed from cellulose, is water soluble and can show a thermo-responsive property with the sol-gel transition in the temperature range of 60 to 80 ◦C [24,67].”
BackgroundFerreira, N. N., Ferreira, L. M. B., Cardoso, V. M. O., Boni, F. I., Souza, A. L. R., & Gremião, M. P. D. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.12.004 · Cited by 245 · cited 1×
“The polymeric backbone with hydrophilic functional groups hold a large amount of water in the structure and crosslinking network formed by polymeric chains, which resists its dissolution in water [4,5].”
BackgroundLiu, M., Song, X., Wen, Y., Zhu, J.-L., & Li, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b12849 · Cited by 244 · cited 1×
“The thermo-responsive hydrogel made of pNIPAAm and alginate showed gel formation near the body temperature and was used as a drug delivery system for anti-cancer drug doxorubicin [109].”
MethodStimuli responsive biopolymer (chitosan) based blend hydrogels for wound healing application
Rasool, A., Ata, S., & Islam, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.083 · Cited by 235 · cited 1×
“It showed different extent of swelling depending on the pH of external media [63].”
BackgroundThermosensitive polymeric hydrogels as drug delivery systems
Gong, C., Qi, T., Wei, X., Qu, Y., Wu, Q., Luo, F., & Qian, Z. (2012) · Current Medicinal Chemistry · doi:10.2174/0929867311302010009 · Cited by 228
Zhou, H. Y., Chen, X. G., Kong, M., Liu, C. S., Cha, D. S., & Kennedy, J. F. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.11.026 · Cited by 227 · cited 1×
“The drug delivery system made from chitosan and αβ-glycerophosphate exhibited a thermo-responsive property and was used as a drug delivery system for adriamycin and 6-mercaptopurine [57].”
MethodChemical, biochemical, functional, and nutritional characteristics of collagen in food systems
Asghar, A., & Henrickson, R. L. (1982) · Advances in Food Research · doi:10.1016/s0065-2628(08)60113-5 · Cited by 203 · cited 1×
“Gelatin, which is an animal origin natural protein, can show thermo-responsive properties and is commercially available in different form such as hydrogels, fibers, and nanoparticles [86].”
BackgroundChatterjee, S., Hui, P. C.-L., & Kan, C.-W. (2018) · Polymers · doi:10.3390/polym10050480 · Cited by 196 · cited 2×
“Pluronic F127 (PF127) is a non-ionic triblock copolymer of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) and, being a thremo-responsive synthetic polymer, PF127 can form the hydrogel near the body temperature [35,95].”
BackgroundSelf-citationThermogelling Biodegradable Polymers with Hydrophilic Backbones: PEG-g-PLGA
Jeong, B., Kibbey, M. R., Birnbaum, J. C., Won, Y.-Y., & Gutowska, A. (2000) · Macromolecules · doi:10.1021/ma000638v · Cited by 193 · cited 4×
“The LSCT can be defined as a critical temperature at which the polymeric solution shows a phase separation, which moves from the isotropic state to the anisotropic state [21].”
BackgroundInfluentialKim, M. R., & Park, T. G. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(01)00557-0 · Cited by 191 · cited 1×
“The thermo-responsive hydrogel made of PF127 and hyaluronic acid showed gel formation at a body temperature of 37 ◦C and was used as a drug delivery system for a human growth hormone [96].”
MethodRecent Advances in Stimuli-Responsive Release Function Drug Delivery Systems for Tumor Treatment
Ding, C., Tong, L., Feng, J., & Fu, J. (2016) · Molecules · doi:10.3390/molecules21121715 · Cited by 181 · cited 1×
“The hydrogels made of stimuli-responsive polymers can show some physical changes like porosity, swelling with external stimuli, and the switchable physical properties provide huge and wide-spread biomedical applications of these polymers [27,28].”
BackgroundZubik, K., Singhsa, P., Wang, Y., Manuspiya, H., & Narain, R. (2017) · Polymers · doi:10.3390/polym9040119 · Cited by 181
(2015) · doi:10.1007/978-981-4451-45-1 · Cited by 180
Liu, W., Zhang, B., Lu, W. W., Li, X., Zhu, D., De Yao, K., Wang, Q., Zhao, C., & Wang, C. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.09.077 · Cited by 170 · cited 2×
“The thermo-responsive hydrogel made of pNIPAAm and methylcellulose showed gel formation at the body temperature and was used as a promising drug delivery system near the body temperature [68].”
BackgroundMethodGao, X., He, C., Xiao, C., Zhuang, X., & Chen, X. (2013) · Polymer · doi:10.1016/j.polymer.2013.01.050 · Cited by 163 · cited 1×
“The pH-responsive biodegradable hydrogels made from four types of pH-sensitive PAA derivatives and poly(l-glutamic acid) as a cross-linker were applied for oral delivery of insulin [129].”
Hydrogels for oral delivery of therapeutic proteins
Peppas, N. A., Wood, K. M., & Blanchette, J. O. (2004) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.4.6.881 · Cited by 161
Thermosensitive Polymeric Hydrogels As Drug Delivery Systems
Gong, C., Qi, T., Wei, X., Qu, Y., Wu, Q., Luo, F., & Qian, Z. (2012) · Current Medicinal Chemistry · doi:10.2174/09298673130109 · Cited by 161
Kwon, S. S., Kong, B. J., & Park, S. N. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2015.02.025 · Cited by 160 · cited 1×
“The pH-responsive hydrogel made of hydroxyethyl cellulose and hyaluronic acid was used as a drug delivery system for the treatment of skin lesions and this transdermal drug delivery system loaded with isoliquiritigenin was found to be effective for the treatment of acne since it showed excellent permeability in the sk…”
MethodOishi, M., Hayashi, H., Iijima, M., & Nagasaki, Y. (2007) · Journal of Materials Chemistry · doi:10.1039/b706973a · Cited by 160 · cited 1×
“The nano-hydrogel was used as a drug delivery system for anti-cancer drug doxorubicin [135].”
MethodTian, B., Liu, S., Wu, S., Lu, W., Wang, D., Jin, L., Hu, B., Li, K., Wang, Z., & Quan, Z. (2017) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2017.03.024 · Cited by 159 · cited 1×
“The pH-triggered oral drug delivery system was developed by capping mesoporous silica SBA-15 with pH-responsive polymer PAA via a facile graft-onto strategy and it was used to deliver anti-cancer drug doxorubicin for the treatment of colon cancer [128].”
MethodLiu, R., Li, D., He, B., Xu, X., Sheng, M., Lai, Y., Wang, G., & Gu, Z. (2011) · Journal of Controlled Release · doi:10.1016/j.jconrel.2011.02.031 · Cited by 157 · cited 1×
“The pH-responsive nanoparticles made of PEG-poly(l-histidine)-poly(l-lactide) were used as drug carriers for anti-tumor drug doxorubicin [120].”
MethodPEG‐Grafted Chitosan as an Injectable Thermoreversible Hydrogel
Bhattarai, N., Matsen, F. A., & Zhang, M. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200400140 · Cited by 156 · cited 1×
“The injectable thermo-reversible hydrogel made from PEG grafted chitosan was used for sustained release of drugs and the hydrogel system also showed a pH-responsive property [56].”
MethodLi, G., Song, S., Guo, L., & Ma, S. (2008) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.22831 · Cited by 154 · cited 1×
“The pH and thermo-responsive micelles developed from the block copolymer of PAA and pNIPAAM (pNIPAAm-b-PAA) was used as a drug delivery system for anti-cancer drug doxorubicin [127].”
MethodÇetin, M., Atila, A., & Kadıoğlu, Y. (2010) · AAPS PharmSciTech · doi:10.1208/s12249-010-9489-6 · Cited by 153
Lim, Y.-B., Kim, S.-M., Lee, Y., Lee, W.-K., Yang, T.-G., Lee, M.-J., Suh, H., & Park, J.-S. (2001) · Journal of the American Chemical Society · doi:10.1021/ja005715g · Cited by 138 · cited 1×
“The pH-responsive hydrogels formed by PDMAEMA and PDEAEMA find drug delivery applications since they can change the swelling-deswelling state in response to change in body pH, especially in the gastro-intestinal environment of the human body [132].”
BackgroundTemperature, pH and redox responsive cellulose based hydrogels for protein delivery
Dutta, S., Samanta, P., & Dhara, D. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.02.042 · Cited by 136 · cited 2×
“The multi-responsive hydrogel was used as a drug delivery system for lysozyme and the release of lysozyme from the system was studied at a different pH, temperature, and redox environments to ensure its maximum effective drug delivery applications [76].”
BackgroundMethodWang, W., Wat, E., Hui, P. C. L., Chan, B., Ng, F. S. F., Kan, C.-W., Wang, X., Hu, H., Wong, E. C. W., Lau, C. B. S., et al. (2016) · Scientific Reports · doi:10.1038/srep24112 · Cited by 130 · cited 5×
“[43,44] developed PF127based thermo-responsive hydrogels to load water soluble traditional Chinese drug Cortex moutan, which has been reported to be effective against pathogenesis related to atopic dermatitis and the transdermal therapy using their system seems to be an effective means to fight against this disease us…”
BackgroundMethodInfluentialLeo, V. D., Milano, F., Mancini, E., Comparelli, R., Giotta, L., Nacci, A., Longobardi, F., Garbetta, A., Agostiano, A., & Catucci, L. (2018) · Molecules · doi:10.3390/molecules23040739 · Cited by 130 · cited 1×
“Eudragit S100 as a pH-responsive polymer was coated onto the liposomes by a fast and organic solvent-free method for the colonic delivery of curcumin [141].”
MethodFunctionalization of cotton cellulose for improved wound healing
Pinho, E., & Soares, G. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb00052b · Cited by 130 · cited 1×
“BSA-based pH-responsive hydrogels were coated on textile fabric to develop medical textiles for wound healing [85].”
BackgroundCheng, Y.-H., Yang, S.-H., Su, W.-Y., Chen, Y.-C., Yang, K.-C., Cheng, W. T.-K., Wu, S.-C., & Lin, F.-H. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0229 · Cited by 129 · cited 1×
“The thermo-responsive hydrogel system developed from chitosan, gelatin, and glycerol phosphate was applied as a cell carrier for nucleus pulposus regeneration [89].”
BackgroundBiodegradable pH-responsive hydrogels for controlled dual-drug release
Xu, L., Qiu, L., Sheng, Y., Sun, Y., Deng, L., Li, X., Bradley, M., & Zhang, R. (2018) · Journal of Materials Chemistry B · doi:10.1039/c7tb01851g · Cited by 128
Wang, D., Tan, J., Kang, H., et al. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.11.023 · Cited by 125 · cited 1×
“The pH-responsive micelles from the copolymers of ethyl cellulose-graft-PDEAEMA through atom transfer radical polymerization were applied as the drug delivery system for model drug rifampicin [136].”
MethodWu, W., Liu, J., Cao, S., Tan, H. S., Li, J., Xu, F., & Zhang, X. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.06.015 · Cited by 124 · cited 2×
“The pH-responsive hydrogel made of poly(vinyl alcohol) and PDMAEMA was used for drug delivery applications [134].”
MethodAycan, D., & Alemdar, N. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.12.023 · Cited by 123 · cited 2×
“The hydrogel structure was fabricated by photopolymerization of chitosan-grafted-glycidyl methacrylate and poly(ethylene glycol)diacrylate under UV light [61].”
MethodZhang, L., Lou, J., Hu, W., Tian, R., Zhang, H., Jia, Y., & Zhang, J. (2014) · International Journal of Nanomedicine · doi:10.2147/ijn.s60270 · Cited by 119 · cited 1×
“The curcumin-loaded thermo-responsive nano-hydrogel was developed with BSA for ophthalmic treatment [80].”
MethodFacile fabrication of redox/pH dual stimuli responsive cellulose hydrogel
Liu, H., Rong, L., Wang, B., Xie, R., Sui, X., Xu, H. Y., Zhang, L., Zhong, Y., & Mao, Z. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.08.085 · Cited by 118 · cited 1×
“The pH-responsive hydrogel of cellulose was developed by simply mixing aqueous solutions of cellulose acetoacetate and cystamine dihydrochloride at room temperature and, moreover, this cellulose-based hydrogel showed dual responsiveness via reversible sol-gel transitions in response to both pH and redox triggers [74].”
MethodTang, Y., Wang, X., Li, Y., Lei, M., Du, Y., Kennedy, J. F., & Knill, C. J. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.06.003 · Cited by 117 · cited 1×
“The injectable thermosensitive hydrogel from methylcellulose and chitosan was applied for tissue engineering and showed sol-gel transition near the body temperature of 37 ◦C [72].”
MethodLi, L., Gu, J., Zhang, J., Xie, Z., Lu, Y., Shen, L., Dong, Q., & Wang, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00389 · Cited by 115 · cited 1×
“The pH-responsive hydrogel made of the PEG derivative andα,β-polyaspartylhydrazide was applied as a drug delivery system for anti-cancer drug doxorubicin [117].”
MethodFANG, J., Chen, J.-P., Yann-Lii, L., & Hu, J. (2007) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.08.012 · Cited by 114 · cited 1×
“The drug delivery system made of chitosan, hyaluronic acid, and pNIPAAm showed thermo-responsive property and was used for controlled delivery of analgesic drug nalbuphine [53].”
MethodpH-Responsive PDMS- b -PDMAEMA Micelles for Intracellular Anticancer Drug Delivery
Car, A., Baumann, P., Duskey, J. T., Chami, M., Bruns, N., & Meier, W. (2014) · Biomacromolecules · doi:10.1021/bm500919z · Cited by 113 · cited 2×
“The thermo-responsive hydrogel of pNIPAAm and spiropyran formed by a facile and versatile surface-initiated controlled polymerization method (SI-ARGET-ATRP) showed the capability of dimensional changes on cotton fabric upon irradiation with visible light or a temperature stimulus [112].”
MethodDerwent, J. J. K., & Mieler, W. F. (2008) · PubMed · Cited by 111
pH-Sensitive hydrogels based on bovine serum albumin for oral drug delivery
Iemma, F., Spizzirri, U. G., Puoci, F., Muzzalupo, R., Trombino, S., Cassano, R., Leta, S., & Picci, N. (2006) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2006.01.010 · Cited by 105 · cited 1×
“BSA-based pH responsive hydrogel formed by free radical polymerization was applied as a drug delivery system for oral delivery [83].”
MethodHacker, M. C., Klouda, L., Ma, B. B., Kretlow, J. D., & Mikos, A. G. (2008) · Biomacromolecules · doi:10.1021/bm8000414 · Cited by 104 · cited 1×
“Poly(N-isopoprylacrilamide) (pNIPAAm), which is a synthetic thermo-responsive polymer can form hydrogel at or near the body temperature [103].”
BackgroundAnirudhan, T. S., & Mohan, A. M. (2014) · RSC Advances · doi:10.1039/c3ra47991a · Cited by 102 · cited 1×
“The gelatin-based pH-responsive hydrogel was developed by grafting β-cyclodextrin to gelatin (Gel), which is followed by cross-linking with oxidized dextran and the hydrogel was used as a drug delivery system for anti-cancer drug 5-fluorouracil [94].”
MethodTransdermal delivery of selegiline from alginate–Pluronic composite thermogels
Chen, C.-C., Fang, C.-L., Al‐Suwayeh, S. A., Leu, Y., & Fang, J. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.05.060 · Cited by 101 · cited 1×
“The drug delivery system showed sustained and controlled release of selegeline [102].”
BackgroundOkuyama, Y., Yoshida, R., Sakai, K., Okano, T., & Sakurai, Y. (1993) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856293x00195 · Cited by 97 · cited 1×
“The hydrogel from pNIPAAm and butyl methacrylate (BuMA) showed a thermo-responsive property with zero order drug release profiles [108].”
BackgroundBetancourt, T., Pardo, J., Soo, K., & Peppas, N. A. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32510 · Cited by 97 · cited 1×
“The pH-responsive hydrogel from PEG and poly(itaconic acid) was developed using UV-initiated free radical polymerization with tetraethylene glycol as the cross-linking agent and Irgacure 2959 as the initiator and it was used as a drug delivery system for oral delivery of the drug [119].”
Methodter Schiphorst, J., van den Broek, M., de Koning, T., Murphy, J. N., Schenning, A. P. H. J., & Esteves, A. C. C. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00161k · Cited by 96
Drug delivery applications for superporous hydrogels
Mastropietro, D. J., Omidian, H., & Park, K. (2012) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2012.641950 · Cited by 94
Stimuli-Responsive Cationic Hydrogels in Drug Delivery Applications
Deen, G., & Loh, X. (2018) · Gels · doi:10.3390/gels4010013 · Cited by 94
Novel hydrogel microspheres of chitosan and pluronic F-127 for controlled release of 5-fluorouracil
Rokhade, A. P., Shelke, N. B., Patil, S. A., & Aminabhavi, T. M. (2007) · Journal of Microencapsulation · doi:10.1080/02652040701281365 · Cited by 93 · cited 1×
“The thermo-responsive hydrogel made from chitosan and PF-127 was applied as a drug delivery system for model anti-cancer drug 5-fluorouracil [100].”
Gong, C. Y., Shi, S., Dong, P. W., Zheng, X. L., Fu, S., Guo, G. F., Yang, J. L., Wei, Y., & Qian, Z. Y. (2009) · BMC Biotechnology · doi:10.1186/1472-6750-9-8 · Cited by 93 · cited 1×
“The biodegradable thermo-responsive composite hydrogel made of PF127 and PEG-poly(ε-caprolactone)-PEG copolymer was applied as a drug delivery system for model drugs Vitamin B12, honokiol, and BSA and the hydrogel showed sol-gel transition at the body temperature [99].”
MethodMucoadhesive Hydrogel Nanoparticles as Smart Biomedical Drug Delivery System
Hanafy, N. A. N., Leporatti, S., & El-Kemary, M. A. (2019) · Applied Sciences · doi:10.3390/app9050825 · Cited by 88
Stimuli-responsive chitosan-based nanocarriers for cancer therapy
Fathi, M., Sahandi Zangabad, P., Majidi, S., Barar, J., Erfan-Niya, H., & Omidi, Y. (2017) · BioImpacts · doi:10.15171/bi.2017.32 · Cited by 87 · cited 1×
“Chitosan as a natural stimuli-responsive polymer is capable of showing both thermo-responsive and pH responsive properties [51,52].”
BackgroundTomšič, M., Prossnigg, F., & Glatter, O. (2008) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2008.03.013 · Cited by 87 · cited 1×
“The thermo-responsive hydrogel from kappa-carrageenan and methylcellulose showed double thermal gel-sol-gel transition upon heating and was used for developing the drug delivery system [70].”
MethodAnirudhan, T. S., & Manasa, A. M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.01.220 · Cited by 83 · cited 1×
“The pH-responsive hydrogel of gelatin methacrylate was developed for the controlled delivery of gentamicin and ampicillin (Amp) and both drugs loaded into the hydrogel showed synergistic activity in killing multi drug resistant bacteria [93].”
BackgroundpH and redox sensitive albumin hydrogel: A self-derived biomaterial
Raja, S. T. K., Thiruselvi, T., Mandal, A. B., & Gnanamani, A. (2015) · Scientific Reports · doi:10.1038/srep15977 · Cited by 82 · cited 1×
“The anionic hydrogel forming albumin can show pH-responsiveness by swelling in basic pH medium and shrinking in acidic pH [27,81].”
BackgroundStimuli Responsive Polymeric Systems for Cancer Therapy
Alsuraifi, A., Curtis, A. D. M., Lamprou, D. A., & Hoskins, C. (2018) · Pharmaceutics · doi:10.3390/pharmaceutics10030136 · Cited by 78
Klouda, L., Perkins, K. R., Watson, B. M., Hacker, M. C., Bryant, S. J., Raphael, R. M., Kurtis Kasper, F., & Mikos, A. G. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.12.027 · Cited by 75 · cited 1×
“Thermo-responsive polymers show sol-gel transitions with a change in temperature of the external environment and hydrogels made of thermoresponsive polymers find tremendous drug delivery applications through simple chemical modifications [29–32], and some thermoresponsive polymers are capable of forming hydrogel near…”
BackgroundMao, J., Kondu, S., Ji, H., & McShane, M. J. (2006) · Biotechnology and Bioengineering · doi:10.1002/bit.20755 · Cited by 75 · cited 1×
“Chitosan due to its primary amine groups forms a cationic hydrogel network in water and it shows pH-responsive behavior by swelling in acidic pH (pH < pKa) and shrinking in basic pH (pH > pKa) [59].”
BackgroundBarkat, K., Ahmad, M., Usman Minhas, M., Khalid, I., & Nasir, B. (2018) · Advances in Polymer Technology · doi:10.1002/adv.21840 · Cited by 72 · cited 1×
“The pH-responsive hydrogel made of the co-polymeric network of PEG and poly(methacrylic acid) was used for oral delivery of model drug oxaliplatin and it was used for colon targeting of the drug [116].”
MethodChuang, C., Don, T., & Chiu, W. (2009) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23564 · Cited by 69 · cited 1×
“Chitosan as a natural stimuli-responsive polymer is capable of showing both thermo-responsive and pH responsive properties [51,52].”
BackgroundNayak, A., Babla, H., Han, T., & Das, D. B. (2016) · Drug Delivery · doi:10.3109/10717544.2014.935985 · Cited by 69 · cited 2×
“The drug delivery system formed from carboxymethyl cellulose and gelatin showed sol-gel transition near the body temperature and was used for transdermal drug therapy with lidocaine [73].”
MethodHsu, S.-H., Leu, Y.-L., Hu, J.-W., & Fang, J.-Y. (2009) · Chemical and Pharmaceutical Bulletin · doi:10.1248/cpb.57.453 · Cited by 68 · cited 1×
“The thermo-responsive hydrogel made of hyaluronic acid grafted PF127 showed in situ gel formation and was applied for delivery of model anti-cancer drugs cisplatin and carboplatin [97].”
MethodWang, B., Wu, X., Li, J., Hao, X., Lin, J., Cheng, D., & Lu, Y. (2016) · Polymers · doi:10.3390/polym8040110 · Cited by 63
Wearable Biosensors for Monitoring Wound Healing
Pasche, S., Angeloni, S., Ischer, R., Liley, M., Luprano, J., & Voirin, G. (2008) · Advances in Science and Technology · doi:10.4028/www.scientific.net/ast.57.80 · Cited by 60 · cited 1×
“The pH-responsive hydrogel made of polyvinyl acetate cross-linked PAA was applied on textile fabric to develop wound healing monitoring textiles [130].”
MethodpH-Responsive Poly(Ethylene Glycol)-block-Polylactide Micelles for Tumor-Targeted Drug Delivery
Xiao, L. J., Huang, L., Moingeon, F., Gauthier, M., & Yang, G. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00509 · Cited by 59 · cited 1×
“The pH-responsive micellar drug delivery system made of acetal-linked poly(ethylene glycol)-block-polylactide copolymer was applied for delivery of anti-cancer drug paclitaxel [121].”
Smart hydrogel-functionalized textile system with moisture management property for skin application
Wang, X., Hu, H., Yang, Z., He, L., Kong, Y., Fei, B., & Xin, J. H. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/12/125027 · Cited by 58 · cited 1×
“The functionalized textiles coated with stimuli-responsive hydrogel can balance moisture on the skin and give comfort by actively balancing body temperature [46,47].”
BackgroundHibbins, A., Kumar, P., Choonara, Y., Kondiah, P., Marimuthu, T., Du Toit, L., & Pillay, V. (2017) · Polymers · doi:10.3390/polym9100474 · Cited by 57
Che, Y., Li, D., Liu, Y., Ma, Q., Tan, Y., Yue, Q., & Meng, F. (2016) · RSC Advances · doi:10.1039/c6ra16746b · Cited by 56 · cited 1×
“The hydrogel formed from chitosan, acrylic acid, (2-dimethylamino) ethyl methacrylate via in situ free radical polymerization showed pH-responsiveness with enhanced mechanical stability and was used as a drug delivery system for controlled delivery of bovine serum albumin and 5-fluorouracil in cancer therapy [60].”
MethodGupta, B., Arora, A., Saxena, S., & Alam, M. S. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1280 · Cited by 55 · cited 1×
“The pH-responsive hydrogel made of PEG and chitosan was applied on the cotton membrane to develop medical textiles for wound dressing [122].”
MethodHydrogels - Smart Materials for Biomedical Applications
(2019) · doi:10.5772/intechopen.78482 · Cited by 54
(2005) · PolyU Institutional Research Archive (Hong Kong Polytechnic University) · Cited by 54
Liu, Z., & Yao, P. (2014) · Polym. Chem. · doi:10.1039/c3py01083j · Cited by 53 · cited 1×
“The drug delivery system made from thermo-responsive hydrogel of glycol chitosan and PF127 by photo-polymerization was applied for delivery of doxorubicin [98].”
MethodKim, J. K., Won, Y.-W., Lim, K. S., & Kim, Y. (2011) · Pharmaceutical Research · doi:10.1007/s11095-011-0581-8 · Cited by 52
Moghadam, S., & Larson, R. G. (2017) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.6b00942 · Cited by 52 · cited 1×
“pNIPAAm is the mostly studied and FDA-approved, widely applied thermo-responsive polymer for drug delivery applications [24,104,105].”
BackgroundBiodegradable gelatin-based nanospheres as pH-responsive drug delivery systems
Curcio, M., Altimari, I., Spizzirri, U. G., et al. (2013) · Journal of Nanoparticle Research · doi:10.1007/s11051-013-1581-x · Cited by 52 · cited 2×
“The nanogel made of gelatin, N,N′-ethylenebisacrylamide, and sodium methacrylate showed a pH-responsive character and it was developed by a solvent-free emulsion polymerization method with sun flower seed oil as a continuous phase [91].”
MethodChang, Y., Xiao, L., & Tang, Q. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29954 · Cited by 50 · cited 1×
“The injectable thermo-responsive hydrogel made of chitosan and gelatin showed sol-gel transition near the body temperature and it showed compatibility with human tissue [88].”
BackgroundJiang, C., Wang, Q., & Wang, T. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.01.107 · Cited by 49 · cited 1×
“Thermo-responsive pNIPAAm was grafted onto cotton fabric to modify the surface property of the fabric, which was dependent on the temperature during the grafting process, and this was applied to develop smart textiles for clinical applications [114].”
MethodSurface modification of cotton fabric with dual‐responsive PNIPAAm/chitosan nano hydrogel
Bashari, A., Hemmatinejad, N., & Pourjavadi, A. (2013) · Polymers for Advanced Technologies · doi:10.1002/pat.3145 · Cited by 46 · cited 1×
“The thermo-responsive nano-hydrogel made of pNIPAAm and chitosan was applied on cotton fabric as a surface modifying system and the nanohydrogel also showed pH-responsiveness [113].”
MethodRaafat, A. I. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32601 · Cited by 44 · cited 1×
“The pH-responsive hydrogel was developed from gelatin and acrylic acid for colon-specific oral drug delivery using ketoprofen as a model drug [92].”
MethodEnhanced Transdermal Permeability via Constructing the Porous Structure of Poloxamer-Based Hydrogel
Wang, W.-Y., Hui, P., Wat, E., Ng, F., Kan, C.-W., Lau, C., & Leung, P.-C. (2016) · Polymers · doi:10.3390/polym8110406 · Cited by 44 · cited 5×
“[43,44] developed PF127based thermo-responsive hydrogels to load water soluble traditional Chinese drug Cortex moutan, which has been reported to be effective against pathogenesis related to atopic dermatitis and the transdermal therapy using their system seems to be an effective means to fight against this disease us…”
BackgroundMethodInfluentialIntelligent hydrogels for the oral delivery of chemotherapeutics
Bromberg, L. (2005) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2.6.1003 · Cited by 42 · cited 1×
“This pH responsive behavior of PAA attributes to oral delivery of the drug by the PAA-based drug delivery system [124].”
BackgroundThermoresponsive Gelatin Nanogels
Gandhi, S. S., Yan, H., & Kim, C.-J. (2014) · ACS Macro Letters · doi:10.1021/mz500499q · Cited by 40 · cited 1×
“The tunable thermo-responsive gelatin hydrogel showed volume transition near the body temperature and it was reported to be a promising drug delivery system [87].”
BackgroundAhmed, T. A., & El‐Say, K. M. (2016) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2016.03.015 · Cited by 39
Self-healing poly(N-isopropylacrylamide) hydrogels
Gulyuz, U., & Okay, O. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.09.002 · Cited by 38 · cited 1×
“pNIPAAm is the mostly studied and FDA-approved, widely applied thermo-responsive polymer for drug delivery applications [24,104,105].”
BackgroundDemir, Ö., & Ege, D. (2018) · Materials · doi:10.3390/ma11040604 · Cited by 38
Ou, K., Wu, X., Wang, B., Meng, C., Dong, X., & He, J. (2017) · Cellulose · doi:10.1007/s10570-017-1449-9 · Cited by 37
Tang, S., Floy, M., Bhandari, R., Sunkara, M., Morris, A. J., Dziubla, T. D., & Hilt, J. Z. (2017) · ACS Omega · doi:10.1021/acsomega.7b01247 · Cited by 33
pH‐sensitive hydrogels based on bovine serum albumin for anticancer drug delivery
El-Sherif, H. M., El-Masry, M. M., & Taleb, M. F. A. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.31301 · Cited by 33
Synthesis and release profile analysis of thermo-sensitive albumin hydrogels
Iemma, F., Spizzirri, U. G., Puoci, F., Cirillo, G., Curcio, M., Parisi, O. I., & Picci, N. (2009) · Colloid & Polymer Science · doi:10.1007/s00396-009-2027-y · Cited by 33 · cited 1×
“The pH responsive hydrogel developed by free radical polymerization of methacrylate bovine serum albumin and N-isopropylacrylamide was used as a drug delivery system for caffeine and theophylline [79].”
MethodFormulation Optimization and Stability Study of Transdermal Therapeutic System of Nicorandil
Tipre, D. N., & Vavia, P. R. (2002) · Pharmaceutical Development and Technology · doi:10.1081/pdt-120005729 · Cited by 32 · cited 2×
“The transparent film formed from Eudragit E100 polymer was used for transdermal therapy since it showed good adhesion to the skin [142].”
BackgroundMethodHuang, H., Hou, L., Zhu, F., Li, J., & Xu, M. (2018) · RSC Advances · doi:10.1039/c8ra01018h · Cited by 31 · cited 1×
“Poly(ethylene glycol) (PEG) is a water-soluble synthetic polymer with excellent biocompatibility and no-toxicity, and shows a pH-responsive property in response to an external pH change [115].”
BackgroundGao, X., He, C., Xiao, C., Zhuang, X., & Chen, X. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.02.102 · Cited by 31 · cited 8×
“BSA-based pH-responsive hydrogels were coated on textile fabric to develop medical textiles for wound healing [85].”
MethodInfluentialCriado‐Gonzalez, M., Rey, J. M., Mijangos, C., et al. (2016) · RSC Advances · doi:10.1039/c6ra25053j · Cited by 24 · cited 1×
“The thermo-responsive hydrogel of gelatin and chondroitin sulphate was obtained by a simple method involving layer-by-layer (LbL) deposition and the system was developed with high mechanical strength, which improved its biomedical applications [90].”
MethodShin, B., Kim, J.-J., Kim, J.-J., et al. (2018) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.29073 · Cited by 24 · cited 1×
“The thermo-responsive hydrogel made of cross-linked chitosan and pNIPAAm via emulsion polymerization was applied as a drug delivery system for antibacterial drug levofloxacin [54].”
MethodAkhgari, A., & Tavakol, A. (2016) · Advanced Pharmaceutical Bulletin · doi:10.15171/apb.2016.030 · Cited by 22 · cited 1×
“Eudragit RL and Eudragit RS are anionic copolymers of acrylic and methacrylic acid esters having quaternary ammonium groups and used as anionic pH-responsive polymers for mainly oral delivery of the drug [138].”
BackgroundpH-responsive hydrogels: Swelling model
Traitel, T., & Kost, J. (2004) · Advances in experimental medicine and biology · doi:10.1007/978-0-306-48584-8_3 · Cited by 22
Functionalized Textile Based Therapy for the Treatment of Atopic Dermatitis
Wang, W., Hui, P., & Kan, C.-W. (2017) · Coatings · doi:10.3390/coatings7060082 · Cited by 22
Kuckling, D. (2018) · Gels · doi:10.3390/gels4030060 · Cited by 19
Applications of cellulose nanofibrils in drug delivery
Gopi, S., Balakrishnan, P., Geethamma, V. G., Pius, A., & Thomas, S. (2018) · Applications of Nanocomposite Materials in Drug Delivery · doi:10.1016/b978-0-12-813741-3.00004-2 · Cited by 13 · cited 1×
“Cellulose, which is the most abundant natural polymer on earth, is made up of glucose monomers and capable of forming hydrogel using their functional hydroxyl groups [65,66].”
BackgroundPourmoazzen, Z., Bagheri, M., Entezami, A. A., & Nejati‐Koshki, K. (2013) · Journal of Polymer Research · doi:10.1007/s10965-013-0295-1 · Cited by 13 · cited 1×
“The drug delivery system made of PEG and cholesterol-modified poly(monomethyl itaconate) showed a pH-responsive property and was used for controlled and targeted release of the model drug piroxicam, which was used in tumor-targeting chemotherapy [118].”
BackgroundThermoresponsive hydrogels from BSA esterified with low molecular weight PEG
Wang, K., Buschle‐Diller, G., & Wu, Y. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40946 · Cited by 13 · cited 1×
“The thermo-responsive hydrogel made from bovine serum albumin (BSA) and low molecular weight polyethylene glycol (PEG) showed sol–gel transition near the body temperature and it was reported to be a promising drug delivery material [78].”
BackgroundWang, J., Zhong, Q., Wu, J., & Chen, T. (2014) · Springer eBooks · doi:10.1007/978-981-4451-68-0_5-1 · Cited by 8
Design of pH-responsive albumin-alginate hydrogels for drug delivery
Oliveira, K. A. L. D., Sitta, D. L. A., Guilherme, M. R., et al. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.03.043 · Cited by 5 · cited 1×
“The drug delivery system based on the pH-responsive hydrogel from alginate and albumin was used for delivery of prednisolone [84].”
MethodIbuprofen Encapsulation by Eudragit RS100 as Microspheres: Preparation and Drug Release
Mady, O. Y. (2017) · MOJ Bioequivalence & Bioavailability · doi:10.15406/mojbb.2017.04.00058 · Cited by 4 · cited 1×
“The microspheres made of pH-responsive Eudragit RS100 were used as a drug delivery system for acidic drug ibuprofen [140].”
Method
Research works printed but not linked: 1
- Kulkarni, 2010, Smart polymers in drug delivery: An overview, J. Pharm. Res., 3, 100
Cited by
Stimuli-Responsive Polymeric Nanocarriers for Drug Delivery, Imaging, and Theragnosis
Das, S. S., Bharadwaj, P., Bilal, M., Barani, M., Rahdar, A., Taboada, P., Bungau, S., & Kyzas, G. Z. (2020) · Polymers · doi:10.3390/polym12061397 · Cited by 581
“[216] Bioimaging is a noninvasive method of observing biological behavior over a given period of time which does not hinder the various life cycles, such as movement, respiration, etc.”
MethodEl-Husseiny, H. M., Mady, E. A., Hamabe, L., Abugomaa, A., Shimada, K., Yoshida, T., Tanaka, T., Yokoi, A., Elbadawy, M., & Tanaka, R. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2021.100186 · Cited by 533
“Hydrogels containing cationic groups as PDMAEMA, CH, and PDEAEMA swell at pH lower than pKa and deswell at pH higher than pKa [100,218, 219].”
BackgroundA Review on the Design and Hydration Properties of Natural Polymer-Based Hydrogels
Karoyo, A. H., & Wilson, L. D. (2021) · Materials · doi:10.3390/ma14051095 · Cited by 351
“The general mechanism of a stimuli-responsive behavior of pH-responsive hydrogels is presented in Figure 8 [78].”
BackgroundPolymeric Nanoparticles for Delivery of Natural Bioactive Agents: Recent Advances and Challenges
Elmowafy, M., Shalaby, K., Elkomy, M. H., Alsaidan, O. A., Gomaa, H. A. M., Abdelgawad, M. A., & Mostafa, E. M. (2023) · Polymers · doi:10.3390/polym15051123 · Cited by 332
“On the other hand, near-infrared light [289], ultrasound [290], and temperature [291] were reported to control the release from some polymeric materials.”
BackgroundpH ‐responsive polymers for drug delivery: Trends and opportunities
Singh, J., & Nayak, P. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230403 · Cited by 327
Metadata
- Authors
- CHATTERJEE, S., & Chi-leung HUI, P.
- Affiliations
- Hong Kong Polytechnic University (HK)
- Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Hong Kong
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2019-07-12
- Volume
- 24
- Issue
- 14
- Pages
- 2547
- ISSN
- 1420-3049 (ISSN-L)
- PMC
- PMC6681499
- OpenAlex
- W2958944148
- Cited by
- 201
- References
- 151
- Citations by year
- 2026: 22 · 2025: 27 · 2024: 35 · 2023: 32 · 2022: 24 · 2021: 34 · 2020: 24 · 2019: 3
- FWCI
- 1.42
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Molecules (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- PolyU Institutional Research Archive (Hong Kong Polytechnic University) (submittedVersion, cc-by)
- Funders
- Block Grant of the Faculty of Applied Science and Textiles, The Hong Kong Polytechnic University (1-ZVLM)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Pharmacology, Toxicology and Pharmaceutics › Pharmaceutical Science › Advanced Drug Delivery Systems
- Life Sciences › Agricultural and Biological Sciences › Agronomy and Crop Science › Polymer-Based Agricultural Enhancements
- Keywords
- stimuli-responsive polymers, drug delivery, textile applications, thermoresponsive polymers, pH-responsive polymers, chitosan, cellulose, albumin, gelatin, Pluronic F127, poly(N-isopropylacrylamide), atopic dermatitis, skin disease treatment
- MeSH terms
- Stimuli Responsive Polymers, Drug Carriers, Humans, Hydrogen-Ion Concentration, Structure-Activity Relationship, Temperature, Textiles, Drug Delivery Systems, Hydrogels
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.