The DOI matches its Crossref record; 145 of the 145 references it cites were found in a registry or an index.
Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications
Open accessAbstract
Over recent years, enthusiasm towards the manufacturing of biopolymers has attracted considerable attention due to the rising concern about depleting resources and worsening pollution. Among the biopolymers available in the world, polylactic acid (PLA) is one of the highest biopolymers produced globally and thus, making it suitable for product commercialisation. Therefore, the effectiveness of natural fibre reinforced PLA composite as an alternative material to substitute the non-renewable petroleum-based materials has been examined by researchers. The type of fibre used in fibre/matrix adhesion is very important because it influences the biocomposites’ mechanical properties. Besides that, an outline of the present circumstance of natural fibre-reinforced PLA 3D printing, as well as its functions in 4D printing for applications of stimuli-responsive polymers were also discussed. This research paper aims to present the development and conducted studies on PLA-based natural fibre bio-composites over the last decade. This work reviews recent PLA-derived bio-composite research related to PLA synthesis and biodegradation, its properties, processes, challenges and prospects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Cosgrove, D. J. (2005) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1746 · Cited by 3,308
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,921
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Isolation and characterization of nanofibers from agricultural residues – Wheat straw and soy hulls
Alemdar, A., & Sain, M. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.04.029 · Cited by 1,713
Natural-fiber-reinforced polymer composites in automotive applications
Holbery, J., & Houston, D. (2006) · JOM · doi:10.1007/s11837-006-0234-2 · Cited by 1,565
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
Jamshidian, M., Tehrany, E. A., Imran, M., Jacquot, M., & Desobry, S. (2010) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/j.1541-4337.2010.00126.x · Cited by 1,557
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
A short review on basalt fiber reinforced polymer composites
Dhand, V., Mittal, G., Rhee, K. Y., Park, S.-J., & Hui, D. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2014.12.011 · Cited by 1,080
Surface modifications of natural fibers and performance of the resulting biocomposites: An overview
Mohanty, A. K., Misra, M., & Drzal, L. T. (2001) · Composite Interfaces · doi:10.1163/156855401753255422 · Cited by 1,072
Poly(Lactic Acid): Synthesis, Structures, Properties, Processing, and Applications
(2010) · Wiley eBooks · doi:10.1002/9780470649848 · Cited by 1,058
Hydrogel Adhesion: A Supramolecular Synergy of Chemistry, Topology, and Mechanics
Yang, J., Bai, R., Chen, B., & Suo, Z. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201901693 · Cited by 1,033
Bamboo fibre reinforced biocomposites: A review
Abdul Khalil, H. P. S., Bhat, I. U. H., Jawaid, M., Zaidon, A., Hermawan, D., & Hadi, Y. S. (2012) · Materials & Design · doi:10.1016/j.matdes.2012.06.015 · Cited by 835
Chitosan: A Natural Biopolymer with a Wide and Varied Range of Applications
Jiménez-Gómez, C. P., & Cecilia, J. A. (2020) · Molecules · doi:10.3390/molecules25173981 · Cited by 817
Natural fibre-reinforced composites for bioengineering and environmental engineering applications
Cheung, H.-Y., Ho, M.-P., Lau, K.-T., Cardona, F., & Hui, D. (2009) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2009.04.014 · Cited by 769
Isolation of nanocellulose from pineapple leaf fibres by steam explosion
Cherian, B. M., Leão, A. L., de Souza, S. F., Thomas, S., Pothan, L. A., & Kottaisamy, M. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.03.046 · Cited by 673
FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
Mazzanti, V., Malagutti, L., & Mollica, F. (2019) · Polymers · doi:10.3390/polym11071094 · Cited by 666
Biocomposites from wheat straw nanofibers: morphology, thermal and mechanical properties
Alemdar, A., & Sain, M. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.05.044 · Cited by 661
Impact and tensile properties of PLA/Cordenka and PLA/flax composites
Bax, B., & Müssig, J. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.004 · Cited by 637
The development and challenges of poly (lactic acid) and poly (glycolic acid)
Jem, K. J., & Tan, B. (2020) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2020.01.002 · Cited by 615
Graupner, N., Herrmann, A. S., & Müssig, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.003 · Cited by 608
Isolation and characterization of nanocrystalline cellulose from sugar palm fibres (Arenga Pinnata)
Ilyas, R. A., Sapuan, S. M., & Ishak, M. R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.045 · Cited by 568
Self-citationExtraction of cellulose nanocrystals from mengkuang leaves (Pandanus tectorius)
Sheltami, R. M., Abdullah, I., Ahmad, I., Dufresne, A., & Kargarzadeh, H. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.01.062 · Cited by 534
Biodegradable composites based on l-polylactide and jute fibres
Plackett, D., Løgstrup Andersen, T., Batsberg Pedersen, W., & Nielsen, L. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00100-3 · Cited by 531
Natural fiber reinforced polylactic acid composites: A review
Siakeng, R., Jawaid, M., Ariffin, H., Sapuan, S. M., Asim, M., & Saba, N. (2019) · Polymer Composites · doi:10.1002/pc.24747 · Cited by 524
Self-citation3D printing of wood fibre biocomposites: From mechanical to actuation functionality
Le Duigou, A., Castro, M., Bevan, R., & Martin, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.018 · Cited by 523
Could biopolymers reinforced by randomly scattered flax fibre be used in structural applications?
Bodros, E., Pillin, I., Montrelay, N., & Baley, C. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.08.024 · Cited by 481
Mohd Nurazzi, N., Asyraf, M. R. M., Khalina, A., Abdullah, N., Sabaruddin, F. A., Kamarudin, S. H., Ahmad, S., Mahat, A. M., Lee, C. L., Aisyah, H. A., et al. (2021) · Polymers · doi:10.3390/polym13071047 · Cited by 478
Self-citationJonoobi, M., Harun, J., Shakeri, A., Misra, M., & Oksman, K. (2009) · BioResources · doi:10.15376/biores.4.2.626-639 · Cited by 458
4D Printing of Hydrogels: A Review
Champeau, M., Heinze, D. A., Viana, T. N., de Souza, E. R., Chinellato, A. C., & Titotto, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910606 · Cited by 443
Isolation and characterization of cellulose nanofibrils from arecanut husk fibre
C.S., J. C., George, N., & Narayanankutty, S. K. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.01.015 · Cited by 429
Bledzki, A. K., & Jaszkiewicz, A. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.06.005 · Cited by 415
On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications
Arrieta, M., Samper, M., Aldas, M., & López, J. (2017) · Materials · doi:10.3390/ma10091008 · Cited by 415
A Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications
Nurazzi, N. M., Asyraf, M. R. M., Khalina, A., Abdullah, N., Aisyah, H. A., Rafiqah, S. A., Sabaruddin, F. A., Kamarudin, S. H., Norrrahim, M. N. F., Ilyas, R. A., et al. (2021) · Polymers · doi:10.3390/polym13040646 · Cited by 398
Self-citationIsolation and characterization of cellulose nanofibrils from Helicteres isora plant
Chirayil, C. J., Joy, J., Mathew, L., Mozetic, M., Koetz, J., & Thomas, S. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.04.020 · Cited by 373
Tribological behavior of natural fiber reinforced PLA composites
Bajpai, P. K., Singh, I., & Madaan, J. (2012) · Wear · doi:10.1016/j.wear.2012.10.019 · Cited by 366
Natural Fibers, Plastics and Composites
(2004) · Springer eBooks · doi:10.1007/978-1-4419-9050-1 · Cited by 364
Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment
Tibolla, H., Pelissari, F. M., & Menegalli, F. C. (2014) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2014.04.011 · Cited by 358
PLA Based Biopolymer Reinforced with Natural Fibre: A Review
Mukherjee, T., & Kao, N. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0320-6 · Cited by 348
Hu, R., & Lim, J.-K. (2007) · Journal of Composite Materials · doi:10.1177/0021998306069878 · Cited by 334
3D printing of continuous flax fibre reinforced biocomposites for structural applications
Le Duigou, A., Barbé, A., Guillou, E., & Castro, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107884 · Cited by 309
Sugarcane bagasse whiskers: Extraction and characterizations
Teixeira, E. D. M., Bondancia, T. J., Teodoro, K. B. R., Corrêa, A. C., Marconcini, J. M., & Mattoso, L. H. C. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.08.009 · Cited by 304
Nazrin, A., Sapuan, S. M., Zuhri, M. Y. M., Ilyas, R. A., Syafiq, R., & Sherwani, S. F. K. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00213 · Cited by 294
Self-citationTransparent and antimicrobial cellulose film from ginger nanofiber
Abral, H., Ariksa, J., Mahardika, M., Handayani, D., Aminah, I., Sandrawati, N., Pratama, A. B., Fajri, N., Sapuan, S. M., & Ilyas, R. A. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.105266 · Cited by 290
Self-citationGanesh Saratale, R., Cho, S.-K., Dattatraya Saratale, G., Kadam, A. A., Ghodake, G. S., Kumar, M., Naresh Bharagava, R., Kumar, G., Su Kim, D., Mulla, S. I., et al. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.124685 · Cited by 285
Alkbir, M. F. M., Sapuan, S. M., Nuraini, A. A., & Ishak, M. R. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.01.098 · Cited by 284
Self-citationCellulose nanofibers from curaua fibers
Corrêa, A. C., de Morais Teixeira, E., Pessan, L. A., & Mattoso, L. H. C. (2010) · Cellulose · doi:10.1007/s10570-010-9453-3 · Cited by 274
Ayrilmis, N., Kariz, M., Kwon, J. H., & Kitek Kuzman, M. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03299-9 · Cited by 274
Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites
Sawpan, M. A., Pickering, K. L., & Fernyhough, A. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.12.004 · Cited by 261
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.124 · Cited by 257
Self-citationIlyas, R. A., Sapuan, S. M., Sanyang, M. L., Ishak, M. R., & Zainudin, E. S. (2018) · Current Analytical Chemistry · doi:10.2174/1573411013666171003155624 · Cited by 253
Self-citationA review of natural fibres, their sustainability and automotive applications
Dunne, R. K., Desai, D. A., Sadiku, E. R., & Jayaramudu, J. (2016) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684416633898 · Cited by 249
4D Printing: A Review on Recent Progresses
Chu, H., Yang, W., Sun, L., Cai, S., Yang, R., Liang, W., Yu, H., & Liu, L. (2020) · Micromachines · doi:10.3390/mi11090796 · Cited by 247
Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Asrofi, M., Atikah, M. S. N., Huzaifah, M. R. M., Radzi, A. M., et al. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.04.011 · Cited by 240
Self-citationJonoobi, M., Khazaeian, A., Tahir, P. M., Azry, S. S., & Oksman, K. (2011) · Cellulose · doi:10.1007/s10570-011-9546-7 · Cited by 237
Preparation and characterization of cellulose nanofibers from de-pectinated sugar beet pulp
Li, M., Wang, L.-J., Li, D., Cheng, Y.-L., & Adhikari, B. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.11.021 · Cited by 234
Closed-loop 4D-printed soft robots
Zolfagharian, A., Kaynak, A., & Kouzani, A. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108411 · Cited by 225
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2017) · BioResources · doi:10.15376/biores.12.4.8734-8754 · Cited by 218
Self-citationSawpan, M. A., Pickering, K. L., & Fernyhough, A. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.05.003 · Cited by 217
Spiegel, C. A., Hippler, M., Münchinger, A., Bastmeyer, M., Barner‐Kowollik, C., Wegener, M., & Blasco, E. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907615 · Cited by 215
Effect of ultrasonication duration of polyvinyl alcohol (PVA) gel on characterizations of PVA film
Abral, H., Atmajaya, A., Mahardika, M., Hafizulhaq, F., Kadriadi, Handayani, D., Sapuan, S. M., & Ilyas, R. A. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.12.078 · Cited by 209
Self-citationThermoplastic pultrusion of natural fibre reinforced composites
de Velde, K. V., & Kiekens, P. (2001) · Composite Structures · doi:10.1016/s0263-8223(01)00110-6 · Cited by 204
4D printing of shape memory polymers
Subash, A., & Kandasubramanian, B. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109771 · Cited by 204
Graupner, N. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-2762-3 · Cited by 199
Syafiq, R., Sapuan, S. M., Zuhri, M. Y. M., Ilyas, R. A., Nazrin, A., Sherwani, S. F. K., & Khalina, A. (2020) · Polymers · doi:10.3390/polym12102403 · Cited by 199
Self-citationPreparation and properties of short natural fiber reinforced poly(lactic acid) composites
YU, T., LI, Y., & REN, J. (2009) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(10)60126-4 · Cited by 194
Hughes, M. (2012) · Journal of Materials Science · doi:10.1007/s10853-011-6025-3 · Cited by 192
Du, Y., Wu, T., Yan, N., Kortschot, M. T., & Farnood, R. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.09.012 · Cited by 191
Sang, L., Han, S., Li, Z., Yang, X., & Hou, W. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.01.085 · Cited by 189
Potential use of natural fiber composite materials in India
Saravana Bavan, D., & Mohan Kumar, G. (2010) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684410381151 · Cited by 186
Biodegradation of aliphatic polyester composites reinforced by abaca fiber
Teramoto, N., Urata, K., Ozawa, K., & Shibata, M. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.04.026 · Cited by 185
Ilyas, R., Sapuan, S., Atikah, M., Asyraf, M., Rafiqah, S. A., Aisyah, H., Nurazzi, N. M., & Norrrahim, M. (2021) · Textile Research Journal · doi:10.1177/0040517520932393 · Cited by 183
Self-citationEffect of fiber length on processing and properties of extruded wood‐fiber/HDPE composites
Migneault, S., Koubaa, A., Erchiqui, F., Chaala, A., Englund, K., Krause, C., & Wolcott, M. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28720 · Cited by 179
Gunti, R., Ratna Prasad, A. V., & Gupta, A. V. S. S. K. S. (2018) · Polymer Composites · doi:10.1002/pc.24041 · Cited by 178
Syafri, E., Sudirman, Mashadi, Yulianti, E., Deswita, Asrofi, M., Abral, H., Sapuan, S. M., Ilyas, R. A., & Fudholi, A. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.10.016 · Cited by 175
Self-citationFerreira, F. V., Mariano, M., Rabelo, S. C., Gouveia, R. F., & Lona, L. M. F. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2017.12.137 · Cited by 174
Sapuan, S. M., Aulia, H. S., Ilyas, R. A., Atiqah, A., Dele-Afolabi, T. T., Nurazzi, M. N., Supian, A. B. M., & Atikah, M. S. N. (2020) · Polymers · doi:10.3390/polym12102211 · Cited by 172
Self-citationRecent 3D and 4D intelligent printing technologies: A comparative review and future perspective
Ma, Q., Rejab, M. R. M., Sahat, I. M., Kumar, N. M., Abdullah, M., & Guduru, R. K. R. (2020) · Procedia Computer Science · doi:10.1016/j.procs.2020.03.434 · Cited by 167
Bendahou, A., Habibi, Y., Kaddami, H., & Dufresne, A. (2009) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2009.1011 · Cited by 165
3D/4D-printed bending-type soft pneumatic actuators: fabrication, modelling, and control
Zolfagharian, A., Mahmud, M. A. P., Gharaie, S., Bodaghi, M., Kouzani, A. Z., & Kaynak, A. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1795209 · Cited by 164
Studies on the mechanical properties of woven jute fabric reinforced poly(l-lactic acid) composites
Khan, G. M. A., Terano, M., Gafur, M. A., & Alam, M. S. (2013) · Journal of King Saud University - Engineering Sciences · doi:10.1016/j.jksues.2013.12.002 · Cited by 161
Highly transparent and antimicrobial PVA based bionanocomposites reinforced by ginger nanofiber
Abral, H., Ariksa, J., Mahardika, M., Handayani, D., Aminah, I., Sandrawati, N., Sapuan, S. M., & Ilyas, R. A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106186 · Cited by 160
Self-citationAsyraf, M. R. M., Rafidah, M., Azrina, A., & Razman, M. R. (2021) · Cellulose · doi:10.1007/s10570-021-03710-3 · Cited by 154
Self-citationThermal Properties of Woven Kenaf/Carbon Fibre-Reinforced Epoxy Hybrid Composite Panels
Aisyah, H. A., Tahir, P. M., Sapuan, S. M., Abdan, K., Berkalp, Ö. B., Lee, S. H., Lee, C. H., Norizan, M. N., Ramli, N., Wahab, M. S., et al. (2019) · International Journal of Polymer Science · doi:10.1155/2019/5258621 · Cited by 153
Self-citationZhang, L., Li, Z., Pan, Y., Yáñez, A. P., Hu, S., Zhang, X., Wang, R., & Wang, D. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.07.037 · Cited by 150
4D Printing: Future Insight in Additive Manufacturing
Zafar, M. Q., & Zhao, H. (2019) · Metals and Materials International · doi:10.1007/s12540-019-00441-w · Cited by 146
Thermal stability and flammability of coconut fiber reinforced poly(lactic acid) composites
Jang, J. Y., Jeong, T. K., Oh, H. J., Youn, J. R., & Song, Y. S. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.11.003 · Cited by 145
Hinchcliffe, S. A., Hess, K. M., & Srubar, W. V. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.03.089 · Cited by 145
Effect of Maleated Compatibilizer on Performance of PLA/Wheat Straw‐Based Green Composites
Nyambo, C., Mohanty, A. K., & Misra, M. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000403 · Cited by 141
Additive manufacturing in drug delivery applications: A review
Reddy, R. D. P., & Sharma, V. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119820 · Cited by 137
Rozilah, A., Jaafar, C. N. A., Sapuan, S. M., Zainol, I., & Ilyas, R. A. (2020) · Polymers · doi:10.3390/polym12112605 · Cited by 137
Self-citationKumar, N., & Das, D. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.07.059 · Cited by 135
Thermal conductivity of PLA-bamboo fiber composites
Takagi, H., Kako, S., KUSANO, K., & Ousaka, A. (2007) · Advanced Composite Materials · doi:10.1163/156855107782325186 · Cited by 132
Effects of surface treatment of ramie fibers in a ramie/poly(lactic acid) composite
Choi, H. Y., & Lee, J.-S. (2012) · Fibers and Polymers · doi:10.1007/s12221-012-0217-6 · Cited by 131
Biopolymers and Biocomposites: Chemistry and Technology
Ilyas, R. A., & Sapuan, S. M. (2020) · Current Analytical Chemistry · doi:10.2174/157341101605200603095311 · Cited by 129
Self-citationPLA/chitosan/keratin composites for biomedical applications
Tanase, C. E., & Spiridon, I. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.03.054 · Cited by 128
Natural-fibre-reinforced polyurethane microfoams
Bledzki, A. K., Zhang, W., & Chate, A. K. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00129-4 · Cited by 126
Asyraf, M. R. M., Ishak, M. R., Sapuan, S. M., Yidris, N., Ilyas, R. A., Rafidah, M., & Razman, M. R. (2020) · International Journal of Polymer Science · doi:10.1155/2020/8878300 · Cited by 124
Self-citationSabaruddin, F. A., Paridah, M. T., Sapuan, S. M., Ilyas, R. A., Lee, S. H., Abdan, K., Mazlan, N., Roseley, A. S. M., & Khalil, H. P. S. A. (2020) · Polymers · doi:10.3390/polym13010116 · Cited by 122
Self-citationIndustrial Production of High Molecular Weight Poly(Lactic Acid)
Södergård, A., & Stolt, M. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch3 · Cited by 121
Pradhan, R. R., Misra, M., Erickson, L. R., & Mohanty, A. K. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.053 · Cited by 121
Sari, N. H., Pruncu, C. I., Sapuan, S. M., Ilyas, R. A., Catur, A. D., Suteja, S., Sutaryono, Y. A., & Pullen, G. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106751 · Cited by 119
Self-citationControl-Based 4D Printing: Adaptive 4D-Printed Systems
Zolfagharian, A., Kaynak, A., Bodaghi, M., Kouzani, A. Z., Gharaie, S., & Nahavandi, S. (2020) · Applied Sciences · doi:10.3390/app10093020 · Cited by 118
Rafiqah, S. A., Abdan, K., Harmaen, A. S., Zaman, K., Tawakkal, I., Liu, Q., Ilyas, R. A., & Lee, C. H. (2020) · Polymers · doi:10.3390/polym12071571 · Cited by 117
Self-citationCellulose nanofibers isolation and characterization from ramie using a chemical-ultrasonic treatment
Syafri, E., Kasim, A., Abral, H., & Asben, A. (2018) · Journal of Natural Fibers · doi:10.1080/15440478.2018.1455073 · Cited by 113
Self-citationJoe, B., & Joykutty, M. A. (2020) · Asian Pacific Journal of Nursing and Health Sciences · doi:10.46811/apjnh/3.1.1 · Cited by 110
Asyraf, M. R. M., Rafidah, M., Ishak, M. R., Sapuan, S. M., Yidris, N., Ilyas, R. A., & Razman, M. R. (2020) · Polymer Composites · doi:10.1002/pc.25587 · Cited by 109
Self-citation4D Printing of Resorbable Complex Shape-Memory Poly(propylene fumarate) Star Scaffolds
Fer, G. L., & Becker, M. L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c01444 · Cited by 101
Abral, H., Dalimunthe, M. H., Hartono, J., Efendi, R. P., Asrofi, M., Sugiarti, E., Sapuan, S. M., Park, J., & Kim, H. (2018) · Starch - Stärke · doi:10.1002/star.201700287 · Cited by 99
Self-citationRecent progress in 4D printing of stimuli-responsive polymeric materials
Ma, S., Zhang, Y., Wang, M., Liang, Y., Ren, L., & Ren, L. (2019) · Science China Technological Sciences · doi:10.1007/s11431-019-1443-1 · Cited by 99
Nechwatal, A., Mieck, K., & Reußmann, T. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00098-8 · Cited by 98
Kurniawan, D., Kim, B.-S., Lee, H. Y., & Lim, J. Y. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.11.007 · Cited by 97
van den Oever, M. J. A., Beck, B., & Müssig, J. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.07.011 · Cited by 96
Production and Characterisation of Cellulose and Nano-Crystalline Cellulose from Kenaf Core Wood
Chan, C. H., Chia, C. H., Zakaria, S., Ahmad, I. B., & Dufresne, A. (2012) · BioResources · doi:10.15376/biores.8.1.785-794 · Cited by 96
Mechanical Property of Surface Modified Natural Fiber Reinforced PLA Biocomposites
Sujaritjun, W., Uawongsuwan, P., Pivsa-Art, W., & Hamada, H. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.06.798 · Cited by 94
Natural fibres actuators for smart bio-inspired hygromorph biocomposites
Duigou, A. L., Réquilé, S., Beaugrand, J., Scarpa, F. L., & Castro, M. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa9410 · Cited by 94
4D Self‐Morphing Culture Substrate for Modulating Cell Differentiation
Miao, S., Cui, H., Esworthy, T. J., Mahadik, B. P., Lee, S., Zhou, X., Hann, S.-Y., Fisher, J. P., & Zhang, L. G. (2020) · Advanced Science · doi:10.1002/advs.201902403 · Cited by 81
Ali, S. S. S., Razman, M. R., & Awang, A. (2020) · International Journal of Energy Economics and Policy · doi:10.32479/ijeep.8987 · Cited by 80
Self-citationStudy on poly(lactic acid)/natural fibers composites
Zhang, Q., Shi, L., Nie, J., Wang, H., & Yang, D. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36852 · Cited by 77
Ożyhar, T., Baradel, F., & Zoppe, J. O. (2020) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2020.105827 · Cited by 77
Jiang, N., Yu, T., Li, Y., Pirzada, T. J., & Marrow, T. J. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.01.018 · Cited by 76
Porras, A., Marañón, A., & Ashcroft, I. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.11.008 · Cited by 59
Nondestructive testing method for Kevlar and natural fiber and their hybrid composites
Amir, S. M. M., Sultan, M. T. H., Jawaid, M., Ariffin, A. H., Mohd, S., Salleh, K. A. M., Ishak, M. R., & Shah, A. U. M. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102290-0.00016-7 · Cited by 58
Self-citationPlant Movements as Concept Generators for the Development of Biomimetic Compliant Mechanisms
Poppinga, S., Correa, D., Bruchmann, B., Menges, A., & Speck, T. (2020) · Integrative and Comparative Biology · doi:10.1093/icb/icaa028 · Cited by 58
Mechanical properties of rice straw fiber-reinforced polymer composites
Ismail, M. R., Yassen, A. A. M., & Afify, M. S. (2011) · Fibers and Polymers · doi:10.1007/s12221-011-0648-5 · Cited by 57
Natural fibre-reinforced composite parts for automotive applications
Furtado, S. C. R., Araújo, A. L., Silva, A., Alves, C., & Ribeiro, A. M. R. (2014) · International Journal of Automotive Composites · doi:10.1504/ijautoc.2014.064112 · Cited by 56
Hydrogel: Preparation, Characterization and Applications
Sahu, N., Gupta, D., & Nautiyal, U. (2020) · Asian Pacific Journal of Nursing and Health Sciences · doi:10.46811/apjnh/3.1.2 · Cited by 55
Baghaei, B., Skrifvars, M., Rissanen, M., & Ramamoorthy, S. K. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40534 · Cited by 54
Plastics and Composites from Polylactic Acid
Oksman, K., & Selin, J. (2004) · Springer eBooks · doi:10.1007/978-1-4419-9050-1_10 · Cited by 53
High-resolution direct 3D printed PLGA scaffolds: print and shrink
Chia, H. N., & Wu, B. M. (2014) · Biofabrication · doi:10.1088/1758-5090/7/1/015002 · Cited by 50
PLA/Carbon Nanotubes Multifilament Yarns for Relative Humidity Textile Sensor
Devaux, É., Aubry, C., Campagne, C., & Rochery, M. (2011) · Journal of Engineered Fibers and Fabrics · doi:10.1177/155892501100600302 · Cited by 50
Composites based on conductive polymer with carbon nanotubes in DMMP gas sensors – an overview
Norizan, M. N., Harussani, M. M., Demon, S. Z. N., Norhana, A. H., Mohamad, I. S., & Norli, A. (2021) · Polimery · doi:10.14314/polimery.2021.2.1 · Cited by 49
Self-citationKandemir, N., Mecitogwlu, Ç., Elmacı, Z. S., Arslanogwlu, A., Göksungur, Y., Baysal, T., & Yemeniciogwlu, A. (2005) · IYTE GCRIS Database (Izmir Institute of Technology) · Cited by 47
Near-infrared-light regulated angiogenesis in a 4D hydrogel
Zheng, Y., Chen, Z., Jiang, Q., Feng, J., Wu, S., & del Campo, A. (2020) · Nanoscale · doi:10.1039/d0nr02552f · Cited by 47
Characterization of Natural Composites Fabricated from Abutilon-Fiber-Reinforced Poly (Lactic Acid)
Wang, H., Hassan, E. A. M., Memon, H., Elagib, T. H. H., & AllaIdris, F. A. (2019) · Processes · doi:10.3390/pr7090583 · Cited by 45
Natural Fibre-Reinforced Biofoams
Bergeret, A., & Benezet, J. C. (2011) · International Journal of Polymer Science · doi:10.1155/2011/569871 · Cited by 38
Natural Polylactic Acid-Based Fiber Composites: A Review
Azlin, M. N. M., Sapuan, S. M., Zainudin, E. S., Zuhri, M. Y. M., & Ilyas, R. A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819661-8.00003-2 · Cited by 30
Self-citationMicro Palm and Kenaf Fibers Reinforced PLA Composite: Effect of Volume Fraction on Tensile Strength
Neoh, K. W., Tshai, K. Y., Khiew, P. S., & Chia, C. H. (2011) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.145.1 · Cited by 17
Alief, N. A., Supriadi, S., & Whulanza, Y. (2019) · AIP conference proceedings · doi:10.1063/1.5096673 · Cited by 8
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e
Mohanty (2000) · doi:10.1002/(sici)1439-2054(20000301)276:1
Cited by
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Ilyas, R., Zuhri, M., Aisyah, H., Asyraf, M., Hassan, S., Zainudin, E., Sapuan, S., Sharma, S., Bangar, S., Jumaidin, R., et al. (2022) · Polymers · doi:10.3390/polym14010202 · Cited by 369
Self-citationKhalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Sharma, S., Sudhakara, P., Singh, J., Ilyas, R. A., Asyraf, M. R. M., & Razman, M. R. (2021) · Polymers · doi:10.3390/polym13162623 · Cited by 288
Self-citationIlyas, R., Zuhri, M., Norrrahim, M., Misenan, M., Jenol, M., Samsudin, S., Nurazzi, N., Asyraf, M., Supian, A., Bangar, S., et al. (2022) · Polymers · doi:10.3390/polym14010182 · Cited by 268
Self-citation
Metadata
- Authors
- Ilyas, R. A., Sapuan, S. M., Harussani, M. M., Hakimi, M. Y. A. Y., Haziq, M. Z. M., Atikah, M. S. N., Asyraf, M. R. M., Ishak, M. R., Razman, M. R., Nurazzi, N. M., Norrrahim, M. N. F., Abral, H., & Asrofi, M.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-04-18
- Volume
- 13
- Issue
- 8
- Pages
- 1326
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3154416429
- Cited by
- 513
- References
- 145
- FWCI
- 27.37
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.