Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Open accessThe DOI matches its Crossref record; 147 of the 151 references it cites were found in a registry or an index; 5 of the 201 sources its claims cite were checked for support.
Abstract
Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC)—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have shown that cellulose nanoparticles could be used as fillers to improve mechanical and barrier properties of biocomposites. Their use for industrial packaging is being investigated, with continuous studies to find innovative solutions for efficient and sustainable systems. Processing is more and more important and different systems are detailed in this paper depending on the polymer solubility, i.e., (i) hydrosoluble systems, (ii) non-hydrosoluble systems, and (iii) emulsion systems. This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.
Overview
CoChat Summary
TL;DR
This review summarizes preparation, properties, and applications of cellulosic bionanocomposites reinforced with cellulose nanocrystals/whiskers and microfibrillated cellulose (MFC). It reports that these nanofillers can strongly improve mechanical and barrier properties, often via a percolating hydrogen-bonded network, while processing and industrial scale-up remain challenging.
Key findings
- Cellulose nanoparticles act as effective reinforcing fillers; the strong effect is generally attributed to formation of a percolating network above the percolation threshold from hydrogen bonding between nanoparticles.
- Mechanical examples include poly(S-co-BuA) latex with 30 wt% wheat straw cellulose whiskers showing a rubbery Young’s modulus more than 1000-times higher than the bulk matrix; 10 wt% cellulose palm tree whiskers in natural rubber decreased strain at break from 575% to 16%; 5 wt% MFC improved PU modulus by approximately 200% at 5 °C and close to 500% at 85 °C; and PLA-MFC modulus increased from 5 GPa at 10 wt% MFC to almost 9 GPa at 70 wt% MFC.
- Barrier properties can improve: pure MFC films had oxygen transmission rate values of 17.0 and 17.8 mL m⁻² day⁻¹; MFC coating on PLA decreased OTR from 746 to 1 mL m⁻² day⁻¹ Pa⁻¹; and 10 wt% sulfonated whiskers in xylan/sorbitol films decreased WVTR from 304 to 174 g h⁻¹ m⁻².
- Thermal behavior varies: several studies found no important Tg changes with cellulose nanofillers, while moisture, plasticization, and filler content can alter Tg and crystallinity depending on the system.
Methods
- Narrative review of cellulose nanoparticles (whiskers/nanocrystals and MFC), their preparation, characterization, properties, and applications, citing more than 150 references.
- Describes processing routes classified by polymer solubility: hydrosoluble systems, emulsion systems, and non-hydrosoluble systems, plus solvent casting, extrusion, surfactant coating, and surface chemical modification/grafting.
- No new experimental data are generated; the paper synthesizes selected published works and cites SciFinder literature trends, e.g., papers on “cellulose and nano” increased from 57 in 2000 to more than 700 in 2009.
Limitations
- The paper states that toxicity is not discussed because of “a lot of uncertainty,” that practical transition from laboratory to industrial scale is not simple and requires chemical engineering to reduce nanoparticle production costs, and that inconsistent terminology for cellulose nanoparticles causes misunderstanding and ambiguity.
- Evident from the text: as a narrative review, it summarizes “some selected works” rather than using a described systematic search or inclusion criteria, and it does not perform quantitative meta-analysis.
- Evident from the text: many property claims are drawn from cited studies rather than independently verified here, and the review notes limited reported use of cellulose nanocrystals for barrier properties and possible porosity in nanocomposite films reducing MFC efficiency.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
5 Valid · 6 Not valid · 149 Not checked · 42 Own results and interpretations
In the paper
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers. This result was surprising due to the high specific area of such nanofillers, e.g., around 170 m 2 g -1 for tunicin whiskers [139].”
- Also stated in: § 3.2. Thermal Properties · plain
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers.”
What the sources say
- Not checked — no full text of the sourcecites [139] Angles, 2000, Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3.2. Thermal Properties · plain
In the paper
“However, it seems that, at least under the conditions presented in this work, the cellulose chemical modification via grafting-from technique changes partially the cellulose crystallinity.”
What the sources say
- Not checked — no full text of the sourcecites [44] Morandi, 2009, Cellulose nanocrystals grafted with polystyrene chains through surface-initiated atom transfer radical polymerization (SI-ATRP), Langmuir source
hedgedstates a possible causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Indeed, classical predicting models for short-fiber composites cannot be applied.”
What the sources say
- Not checked — no full text of the sourcecites [71] Favier, 1995, Polymer nanocomposites reinforced by cellulose whiskers, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
What the sources say
- Not checked — no full text of the sourcecites [136] Seydibeyoglu, 2008, Novel nanocomposites based on polyurethane and micro fibrillated cellulose, Compos. Sci. Technol. source
- Not checked — no full text of the sourcecites [137] Wu, 2007, A high strength nanocomposite based on microcrystalline cellulose and polyurethane, Biomacromolecules source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“High efficiency was reached by this method that allowed esterification of cellulose nanoparticles to different extents with fatty acid chlorides.”
What the sources say
- Not checked — no full text of the sourcecites [129] Berlioz, 2009, Gas-phase surface esterification of cellulose microfibrils and whiskers, Biomacromolecules source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
108 more claims
Create a free account to see all 202 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 61
- It may state two separate claims as one. 45
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
“This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.”
§ References
“150. Saxena, A.; Ragauskas, A.J. Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan. Carbohyd. Polym. 2009 , 78 , 357-360.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ References
“23. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1296.”
§ References
“35. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1298.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3.2. Thermal Properties
“However, when bacterial cellulose nanocrystals were modified with silane groups, Tm values were founded to increase with increasing filler content. According to the authors, this difference was due to stronger interactions between silylated whiskers and PVA matrix.”
§ 3.2. Thermal Properties
“Grunert et al. [43] in their work with cellulose acetate butyrate (CAB) reinforced with bacterial cellulose nanocrystals.”
Citations
Cites
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980 · cited 1×
“[61] gives a clear overview of such cellulosic nanomaterials.”
BackgroundComposites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 5×
“The term ―natural fibers‖ is used to designate numerous kinds of fibers that are naturally produced by plants, animals and minerals [5].”
BackgroundInfluentialNishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676 · cited 1×
“Indeed lignocellulosic materials start to degrade near 220 °C restricting the type of matrix that can be used in association with natural fillers [22,101].”
BackgroundCellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493 · cited 2×
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
MethodJOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · cited 1×
“their ability to form hydrogen bonds play a major role in directing the crystalline packing and also governing the physical properties of cellulose [16].”
BackgroundAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Self-citationPääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796 · cited 1×
“[85,86] have proposed a new process to obtain MFC based on TEMPO reaction and strong mixing.”
MethodNatural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Research works printed but not linked: 9
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Nalwa, H.S. Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publisher. [2nd ed.]. in press.
- Brännvall, E. (2007). Aspect on Strength Delivery and Higher Utilisation of Strength Potential of Soft Wood Kraft Pupl Fibres. [Ph.D. Thesis, KTH, Royal Institute of Technology].
- Kroschwitz, 2003, Cellulose, Encyclopedia of Polymler Science and Technology, Volume 5, 473
- Lu, 2008, Surface modification of microfibrillated cellulose for epoxy composite applications, Polymer, 49, 1285, 10.1016/j.polymer.2008.01.028 · DOI · Paper page
- Herrick, 1983, Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci. Appl. Polym. Symp., 37, 797
- Khademhosseini, 2006, Nanobiotechnology—Drug delivery and tissue engineering, Chem. Engin. Progress, 102, 38
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
Cited by
Items 901–1,000 of 1,323
Starch‐Based Bionanocomposite: Processing Techniques
Koshy, R. R., Pothan, L. A., & Thomas, S. (2013) · Wiley eBooks · doi:10.1002/9781118609958.ch10 · Cited by 8
Satyanarayana, K. G., Rangan, A., Prasad, V. S., & Magalhães, W. L. E. (2017) · Wiley eBooks · doi:10.1002/9781119441632.ch126 · Cited by 8
“…et al., 2005), potato (Dufresne et al., 2000), wheat straw (Alemdar et al., 2008; Chen W et al., 2011), bamboo (Abe & Yano, 2010; Chen W et al., 2011a; Hrabalova et al., 2011), Luffa cylindrica (Siqueira et al., 2010b), and some seaweed (Nystro¨m et al., 2009; Thiripurasundari et al., 2012).”
BackgroundStarch nanocrystals : preparation and application to bio-based flexible packaging
Corre, D. L. (2011) · theses.fr (ABES) · doi:10.70675/47986feezd7a0z4dadz904fza00b81be9a65 · Cited by 11
Li, B., Sun, Z., Tian, Z., et al. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.140247 · Cited by 6
Chandrika, K. S. V. P., Singh, A., Prasad, R. D., Yadav, P., Dhara, M., Kavya, M., Kumar, A., & Gopalan, B. (2025) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2025.100900 · Cited by 6
Effect of drying method on the surface properties of cellulose nanofibril films
Andrade, A., Vega-Reyes, J., Yáñez-Durán, G., Henríquez-Gallegos, S., Torres, C., Villalba-Yepez, C., Castaño, J., Montoya, L. F., Pereira, M., & Valerio, O. (2026) · Scientific Reports · doi:10.1038/s41598-026-36984-3 · Cited by 9
“On the other hand, attempts to use vacuum oven drying were discarded after 24 h due to the appearance of numerous bubbles within the suspension, indicating the formation of undesirable internal cavities 18,20 .”
Hierarchical Model for Optimizing Natural Fiber Selection Process for Eco-design of Buildings
Balo, F., & Sagbansua, L. (2022) · Journal of Natural Fibers · doi:10.1080/15440478.2021.2002778 · Cited by 6
“The hemicelluloses are poly-saccharides joined jointly by comparatively branching, short bonds (John and Anandjiwala 2007; Siqueira, Bras, and Dufresne 2010; Thakur, Thakur, and Gupta 2014).”
BackgroundStructure and Properties of Cellulose and Its Derivatives
Kassab, Z., Bahloul, A., Hassani, F. S. A., et al. (2023) · Composites science and technology · doi:10.1007/978-981-99-2473-8_15 · Cited by 6
Pawar, J., Phatak, R. S., Qureshi, N., Singh, A. E., Shinde, M., Amalnerkar, D., & Doh, J. (2023) · Current Materials Science · doi:10.2174/2666145417666230712122748 · Cited by 11
Cellulosic Nanofibers Utilizing a Silicone Elastomeric Core to Form Stretchable Paper
Dorsainvil, J. S., Brown, M. S., Rafiee, Z., Elhadad, A., Choi, S., & Koh, A. (2023) · Advanced Materials Interfaces · doi:10.1002/admi.202300487 · Cited by 6
Bio-based hybrid adhesive with superior bonding strength and excellent flame retardancy
Yang, Y., Yang, H., Yang, H., et al. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.120079 · Cited by 6
Li, X., Zhu, H., Wei, X., et al. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.140279 · Cited by 6
Fontananova, E., Ciriminna, R., Talarico, D., Galiano, F., Figoli, A., Profio, G. D., Mancuso, R., Gabriele, B., Pomelli, C. S., Guazzelli, L., et al. (2025) · Nano Select · doi:10.1002/nano.70001 · Cited by 15
Orellana, J. L., Mauhar, M., & Kitchens, C. L. (2016) · JOURNAL OF RENEWABLE MATERIALS · doi:10.7569/jrm.2016.634126 · Cited by 6
STEX Treated and Untreated Hemp Fiber Comparative Structural Analysis
Šutka, A., Kukle, S., & Gravitis, J. A. (2011) · Cited by 6
Nanostructured biomimetic, bioresponsive, and bioactive biomaterials
Raghvendra, K. M. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102205-4.00002-7 · Cited by 11
Abdullah, M. A., Nazir, M. S., Tahir, Z., Abbas, Y. J., Akhtar, M. N., Raza, M. R., & Hussein, H. A. (2019) · Springer eBooks · doi:10.1007/978-3-030-05399-4_25 · Cited by 6
General introduction on sustainable nanocellulose and nanohydrogel matrices
Mohammad, F., Bwatanglang, I. B., balawi, A. N. A., Chavali, M. S., & Al‐Lohedan, H. A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-816789-2.00001-8 · Cited by 7
Biofilms of cellulose and hydroxyapatite composites: Alternative synthesis process
Pieper, C. M., da Rosa, W. L. D. O., Lund, R. G., da Silva, A. F., Piva, E., Salas, M. M., Maron, G. K., Bomio, M. R. D., Motta, F. V., & Carreño, N. L. V. (2020) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911520951838 · Cited by 7
Kusnoto, J., Dwifulqi, H., & Tjandrawinata, R. (2021) · Scientific Dental Journal · doi:10.4103/sdj.sdj_53_20 · Cited by 6
Hamid, N. H., Jawaid, M., Hisan, W. S. I. W. B., et al. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.08.056 · Cited by 6
Nanocellulose: Chemistry, preparation, and applications in the food industry
Bashir, O., Rashid, S., Masoodi, N., Khan, S. A., Majid, I., Malik, M., & Beenish (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-89909-3.00008-0 · Cited by 10
Plant-Fiber and Wood-Based Functional Materials
Wimmer, R., Frey, M., Hausmann, M. K., Keplinger, T., Siqueira, G. D. F., & Zimmermann, T. (2023) · Springer handbooks · doi:10.1007/978-3-030-81315-4_30 · Cited by 8
Self-citationStructure and Properties of Cellulose and Nanocellulose
Bajpai, P. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-811101-7.00003-4 · Cited by 17
Cellulose-Based Hydrogel for Industrial Applications
Billah, S. M. R., Mondal, M. I. H., Somoal, S. H., & Pervez, M. N. (2018) · Polymers and polymeric composites · doi:10.1007/978-3-319-76573-0_63-1 · Cited by 13
Bionanomaterials from Agricultural Wastes
Kaur, M., Mehta, A., Bhardwaj, K. K., & Gupta, R. (2020) · Advanced structured materials · doi:10.1007/978-981-15-3560-4_10 · Cited by 9
Hashim, S. N. A. S., Norizan, B. A.-Z., Baharin, K. W., et al. (2020) · Cellulose Chemistry and Technology · doi:10.35812/cellulosechemtechnol.2020.54.63 · Cited by 6
Fortunati, E., Verma, D., Luzi, F., Mazzaglia, A., Torre, L., & Balestra, G. M. (2019) · Springer eBooks · doi:10.1007/978-3-319-68255-6_15 · Cited by 6
Electrospun cellulosic fibre-reinforced composite materials
Corre, D. L., Tucker, N., & Staiger, M. P. (2014) · Elsevier eBooks · doi:10.1533/9780857099228.1.115 · Cited by 7
Production and properties of micro-cellulose reinforced thermoplastic starch
Kmetty, Á., Karger-Kocsis, J., & Czigány, T. (2015) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/74/1/012008 · Cited by 6
Molecular mobility of nanocellulose hydrogels
Кузина, С. И., Shilova, I. A., Ivanov, V. F., et al. (2016) · Russian Journal of Physical Chemistry B · doi:10.1134/s1990793116050067 · Cited by 6
Agarwal, C., Singh, M. N., Sharma, R. K., et al. (2019) · Materials Performance and Characterization · doi:10.1520/mpc20180149 · Cited by 6
Behzad, T., & Ahmadi, M. (2016) · InTech eBooks · doi:10.5772/63704 · Cited by 7
Cellulose‐Based Liquid Crystalline Composite Systems
Borges, J. P., Canejo, J. P., Fernandes, S. N., Brogueira, P., & Godinho, M. H. (2014) · Wiley eBooks · doi:10.1002/9781118872246.ch8 · Cited by 14
Mechanical Properties of Cellulose‐Based Bionanocomposites
Deepa, B., Pillai, S. S., Pothan, L. A., & Thomas, S. (2013) · Wiley eBooks · doi:10.1002/9781118609958.ch19 · Cited by 6
Biopolymer ‐Based Nanocomposites for Environmental Applications
El-sherbiny, I. M., & Ali, I. H. (2017) · Wiley eBooks · doi:10.1002/9781119441632.ch162 · Cited by 9
Processing Methods for Bionanocomposites
Bagal-Kestwal, D., Pan, M. H., & Chiang, B. (2019) · Wiley eBooks · doi:10.1002/9781119301714.ch2 · Cited by 8
A brief review on extraction and characterization of nanocellulose from date palm biomass
Thomas, S. P. (2025) · Journal of King Saud University - Engineering Sciences · doi:10.1007/s44444-025-00005-x · Cited by 8
“A very recent review highlighted the importance of date palm trees in Saudi Arabia, their uses, compounds that can be extracted from the tree parts, etc. (Albishi and Alsabi 2025).”
Meijouda, A., Chaari, M., Kaddami, H., et al. (2025) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2025.128497 · Cited by 5
Cellulose based bioplastics: A sustainable approach toward environmental safety - A review
Kour, M., Chaudhary, S., & Kumar, R. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01694 · Cited by 12
POWDERED CELLULOSIC MATERIALS: OVERVIEW, CLASSIFICATION, CHARACTERISTICS AND FIELDS OF APPLICATION
Toptunov, Е. А., & Вениаминовна, С. Ю. (2021) · chemistry of plant raw material · doi:10.14258/jcprm.2021049186 · Cited by 10
Barrier properties of bionanocomposites
Sheibani, S., Rozalli, N. H. M., & Nafchi, A. M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-22067-8.00006-x · Cited by 10
Bhavya, E. P., & Raman, M. (2025) · Journal of Applied Phycology · doi:10.1007/s10811-025-03531-y · Cited by 5
“The high interfacial interaction and uniform dispersion of nanocellulose and soy protein in the matrix evidently contributed to the greater mechanical strength (Siqueira et al. 2010).”
Caracterização morfológica de nanocristais de celulose por microscopia de força atômica
Moraes, A. D. S., de Góes, T. S., Hausen, M. D. A., Morais, J. P. S., Rosa, M. D. F., de Menezes, A. J., Mattoso, L. H. C., & Leite, F. L. (2016) · Matéria (Rio de Janeiro) · doi:10.1590/s1517-707620160002.0050 · Cited by 5
Nanocellulose as Polymer Composite Reinforcement Material
George, B., Lal, N., & Vasu, S. T. (2019) · Nanotechnology in the life sciences · doi:10.1007/978-3-030-16379-2_14 · Cited by 7
Samarawickrama, R., Wijayapala, U. G. S., Wanasekara, N. D., & Fernando, C. A. N. (2021) · Journal of Nanotechnology · doi:10.32829/nanoj.v5i1.141 · Cited by 5
“These hydroxyl groups on CNCs surfaces can be readily modified to achieve different surface properties and successfully bonding with natural polymers with dye molecules (Hubbe et al., 2018; Siqueira et al., 2010).”
BackgroundSynthesis and Characterization of Biocomposite Films of Methylcellulose-Based with Nanocellulose
(2022) · Biointerface Research in Applied Chemistry · doi:10.33263/briac133.274 · Cited by 5
Nwuzor, I. C., Ewulonu, C. M., Nwanonenyi, S. C., & Oyeoka, H. C. (2023) · International Journal of Advanced Science and Engineering · doi:10.29294/ijase.9.3.2023.2874-2918 · Cited by 6
Biodegradable and biocompatible polymer nanocomposites for tissue engineering applications
Rashdan, H. R. M., & El‐Naggar, M. E. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91696-7.00002-7 · Cited by 6
Mahdy, S. Z. A., Amin, A., ABOUZEID, R. E., Moustafa, I. M. I., Youssef, A., & ELhabasha, E. S. (2023) · Egyptian Journal of Chemistry · doi:10.21608/ejchem.2023.232794.8532 · Cited by 6
Li, H., Asta, N., Wang, Z., Pettersson, T., & Wågberg, L. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.121894 · Cited by 6
Iridescent Patterns Production from Solid Film Cellulose Nanocrystals Prepared from Coffee Husks
Nyaruai, C., Ollengo, M. A., & Muthakia, G. K. (2024) · Universal Journal of Carbon Research · doi:10.37256/ujcr.2120244851 · Cited by 5
“The chemical structure of cellulose contributes to the high crystallinity observed in CNCs, as each monomer contains three hydroxyl groups that can participate in inter-and intra-molecular hydrogen bonding, resulting in a highly compact system [45].”
BackgroundChemical Functionalization of Cellulose Nanofibrils with 2-Aminoethyl Hydrogen Sulfate
Barros, M. F. D. J., Mathias, S. L., Lopes, H. S. M., et al. (2024) · ACS Omega · doi:10.1021/acsomega.4c08573 · Cited by 5
Thermal characteristics of ethylene‐ co ‐vinyl acetate/cellulose microfibers composites
Sonia, A., Dasan, K. P., & Jayachandran, J. (2013) · Polymer Composites · doi:10.1002/pc.22437 · Cited by 5
Duanmu, J., Gamstedt, E. K., & Rosling, A. (2012) · Journal of Composite Materials · doi:10.1177/0021998312437000 · Cited by 5
“Recently, the interest of applying MFC as reinforcement in polymer matrices has much increased and has also been reviewed.(21) The material consists of nanoscale bundles of microfibrils, which form entangled networks.”
Background심, 규., 윤, 혜., & 류, 재. (2013) · Journal of Korea Technical Association of The Pulp and Paper Industry · doi:10.7584/ktappi.2013.45.1.035 · Cited by 5
CTViz: A tool for the visualization of transport in nanocomposites
Beach, B., Brown, J. S., Tarlton, T., et al. (2016) · Journal of Molecular Graphics and Modelling · doi:10.1016/j.jmgm.2016.03.012 · Cited by 5
Spectroscopy and microscopy of microfibrillar and nanofibrillar composites
Owolabi, A. F., Saurabh, C. K., Dungani, R., & Khalil, H. P. S. A. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-101991-7.00012-1 · Cited by 5
Application of micro- and nanocrystalline cellulose
Sotnikova, Y. S., Demina, T. S., Istomin, A. V., et al. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/347/1/012006 · Cited by 5
The Effect of Cellulose Nanocrystals (CNC) on Isothermal Crystallization Kinetics of LLDPE and HDPE
Tan, V., Abdallah, W., & Kamal, M. R. (2018) · International Polymer Processing · doi:10.3139/217.3559 · Cited by 4
“…biomedical applications, foams for thermal, electrical or sound insulation, rheology modifiers, continuous fibers, hybrid composites, barrier and optical films etc. (Lin et al., 2012; Mihindukulasuriya and Lim, 2014; Plackett et al., 2014; Rajisha et al., 2014; Siqueira et al., 2010).”
BackgroundMuhamad, I. I., Zahan, K. A., Pa’e, N., et al. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102290-0.00008-8 · Cited by 5
Yanuartono, Y., Purnamaningsih, H., Indarjulianto, S., Nururrozi, A., Raharjo, S., & Haribowo, N. (2020) · Jurnal Peternakan Sriwijaya · doi:10.33230/jps.8.2.2019.10227 · Cited by 9
Seta, F. T., An, X., & Liu, H. (2021) · JURNAL SELULOSA · doi:10.25269/jsel.v11i02.341 · Cited by 5
Chemical Degradation of Aflatoxins
Freitas‐Silva, O., Coelho, C. C. D. S., Trombete, F. M., da Conceição, R. R. P., & Ribeiro‐Santos, R. (2021) · Springer eBooks · doi:10.1007/978-3-030-85762-2_11 · Cited by 5
Adsorption Mechanism of Chloropropanol by Crystalline Nanocellulose
Zhao, J., Gong, Z., Chen, C., Liang, C., Huang, L., Huang, M., Qin, C., & Wang, S. (2022) · Polymers · doi:10.3390/polym14091746 · Cited by 5
“Paper packaging materials possess the advantages of renewable resources [7] such as easy waste recycling ability and degradability [8].”
BackgroundK, B. S. T., Chandra, C. S. J., Sasi, S., & Arundhathi, C. K. (2023) · Springer eBooks · doi:10.1007/978-981-19-6772-6_22-1 · Cited by 12
Insulation Materials Made with Vegetable Fibres
Lü, X., Lü, T., Lipponen, O., & Viljanen, M. (2013) · Springer eBooks · doi:10.1007/978-1-4471-5523-2_16 · Cited by 7
Mukherjee, G., Dhiman, G., & Akhtar, N. (2017) · Environmental science and engineering · doi:10.1007/978-3-319-48439-6_17 · Cited by 7
Chen, G., Zhang, L., Wang, Z., Chen, C., Guo, H., & Wang, G. (2018) · Materials Research Express · doi:10.1088/2053-1591/aaee39 · Cited by 5
Characterization of Biopolymer and Chitosan‐Based Nanocomposites with Antimicrobial Activity
Rhim, J. (2013) · Wiley eBooks · doi:10.1002/9781118451915.ch19 · Cited by 6
Mechanical Properties and Water Sorption of Chemically Modified Natural Fiber-Based Composites
John, M. J., & Molaba, T. P. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-819724-0.00106-3 · Cited by 5
Cagnon, T. (2012) · theses.fr (ABES) · doi:10.70675/a57bd1e3za669z4b53z9244z2aeba880d523 · Cited by 7
Trifol, J., Mendoza, A. I., & Moriana, R. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c04448 · Cited by 5
Rodrigues, K. F., de Oliveira, T. C., Montanheiro, T. L. D. A., et al. (2025) · International Wound Journal · doi:10.1111/iwj.70711 · Cited by 4
Microstructure of Thermoplastic Composites Reinforced with Wool and Wood
Baptista, C., Martins, G., Santos, C., Mateus, A., & Antunes, F. (2019) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.890.98 · Cited by 4
PREPARATION AND ANALYSIS OF CELLULOSE PFA COMPOSITES: A CRITICAL REVIEW
Khumalo, N. L., Mohomane, S. M., MOTLOUNG, S. V., Koao, L. F., Malevu, T. D., & Motaung, T. E. (2021) · Cellulose Chemistry and Technology · doi:10.35812/cellulosechemtechnol.2021.55.30 · Cited by 4
Effects of Nanocrystal Cellulose from Bamboo on the Flexural Strength of Acrylic Resin: In Vitro
Aupaphong, V., Kraiwattanawong, K., & Thanathornwong, B. (2022) · Dentistry Journal · doi:10.3390/dj10070129 · Cited by 4
Thomas, S. K., Begum, P. M. S., Dileep, P., Neenu, K. V., David, D. A., Santu, A., & D., M. D. C. (2023) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-023-03850-5 · Cited by 6
Berg, A. G., & Guzmán, F. (2023) · Springer handbooks · doi:10.1007/978-3-030-81315-4_32 · Cited by 5
Zhao, K., Huang, N., Qi, W., et al. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.143209 · Cited by 4
CytroCell@Nafion: Enhanced Proton Exchange Membranes
Talarico, D., Fontananova, E., Sibillano, T., Ciriminna, R., Palermo, S., Galiano, F., Profio, G. D., Figoli, A., Petri, G. L., Angellotti, G., et al. (2025) · Global Challenges · doi:10.1002/gch2.202500338 · Cited by 5
“Such behavior is critical for the formation of mechanically robust nanocomposites, as it allows the cellulose nanofibers to reach the percolation threshold at low loading levels [24], where a continuous, rigid nanofibrillar network forms throughout the composite material [28].”
Ajijolakewu, K. A., Sani, A., Oyeyiola, G. P., et al. (2013) · Notulae Scientia Biologicae · doi:10.15835/nsb549176 · Cited by 4
“It is biosynthesized by a number of living organisms ranging from higher to lower plants, some amoebae, sea animals, bacteria and fungi (Gilberto et al., 2010).”
BackgroundSim, K., Youn, H. J., Ahn, J., Lee, J., Lee, H., & Jo, Y. (2014) · Journal of Korea Technical Association of The Pulp and Paper Industry · doi:10.7584/ktappi.2014.46.1.046 · Cited by 4
Sukaimi, J., Abdullah, W. N. H. W., Supian, M. A. F., et al. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/702/1/012035 · Cited by 4
Waterproof and Oil Repellent Treatments of Cotton Fabric
Khan, M. I., Alam, S. S., Jannat, F., & Islam, M. S. (2020) · Journal of Textile Science and Technology · doi:10.4236/jtst.2020.61006 · Cited by 4
Flexural Properties of Surface-Modified Sisal Fiber-Reinforced Polyester Resin Composites
Mengo, W. K., David, M. M., Stephen, M. M., & Siphila, M. W. (2021) · Journal of Natural Fibers · doi:10.1080/15440478.2021.1993471 · Cited by 4
“Studies have shown that, alongside hemp, sisal fiber costs the least to produce (per ton) in the world (Siqueira, Bras, and Dufresne 2010).”
BackgroundNanomaterialien: Auswirkungen auf Umwelt und Gesundheit
TA-SWISS (2013) · vdf Hochschulverlag AG an der ETH Zürich eBooks · doi:10.3218/3560-5 · Cited by 6
Comprehensive Review on Silicon-enhanced Green Nanocomposites Towards Sustainable Development
Jatoi, A. S., Ahmed, S., Muhammad, A., Mubarak, N. M., Mazari, S. A., Abro, R., Memon, A. Q., Shah, A., Anjum, A., & Iqbal, A. (2021) · Silicon · doi:10.1007/s12633-021-01516-3 · Cited by 4
Nanocelluloses: Production, Characterization and Market
Ferreira, P. J., & Lourenço, A. F. (2022) · Advances in experimental medicine and biology · doi:10.1007/978-3-030-88071-2_6 · Cited by 5
Biorenewable Nanocomposite Materials, Vol. 1: Electrocatalysts and Energy Storage
Pathania12, D., & Singh34, L. (2022) · ACS symposium series · doi:10.1021/bk-2022-1410 · Cited by 4
A Comparative Study of Nanofibers from Regenerated Cotton and Jute
Ara, Z. A., Wang, L., Padhye, R., & Wang, X. (2022) · Journal of Natural Fibers · doi:10.1080/15440478.2022.2131307 · Cited by 4
“(Siqueira, Bras, and Dufresne 2010).”
Khadraoui, M., Nader, S., Khiari, R., et al. (2022) · Cellulose · doi:10.1007/s10570-022-04910-1 · Cited by 4
“Consequently, as the length to diameter ratio lowers, the probability of connection between elements decreases at a given concentration (Siqueira et al. 2010).”
BackgroundBionanocomposites for rejuvenation of heavily contaminated environment
Natarajan, A., & Kirubavathy, S. J. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91767-4.00014-8 · Cited by 4
Świerczyńska, M., Mrozińska, Z., Lisiak-Kucińska, A., Walawska, A., & Kudzin, M. H. (2024) · Coatings · doi:10.3390/coatings14070843 · Cited by 5
Mesoppirr, L. S., Suter, E. K., Omwoyo, W. N., et al. (2024) · Open Journal of Applied Sciences · doi:10.4236/ojapps.2024.149161 · Cited by 4
Effect of Individualized Cellulose Fibrils on Properties of Poly(Methyl Methacrylate) Composites
Islam, M. T., Montarsolo, A., Zoccola, M., Canetti, M., Cacciamani, A., & Bertini, F. (2016) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2016.1207589 · Cited by 4
“In particular, cellulose nanofibrils-filled polymer composites have been studied as an alternative to inorganic filler-reinforced polymer nanocomposites.([4,5]) The cellulose fiber materials have been incorporated into a wide range of both natural and synthetic polymer matrices, biodegradable (e.”
BackgroundXu, N., Ding, E., & Xue, F. (2017) · Journal of Polymer Engineering · doi:10.1515/polyeng-2017-0004 · Cited by 4
Nanocrystalline cellulose from agricultural waste: an overview
Ukkund, S. J., Taqui, S. N., Mayya, D. S., & Prasad, P. (2018) · International Journal of Nanoparticles · doi:10.1504/ijnp.2018.10017716 · Cited by 9
Zhang, Y., Duan, D., Lei, H., et al. (2019) · Sustainable Energy & Fuels · doi:10.1039/c9se00860h · Cited by 4
Nanocellulose for Sustainable Future Applications
AI-Jawhari, I. F. H. (2020) · Springer eBooks · doi:10.1007/978-3-030-11155-7_16-1 · Cited by 8
Metadata
- Authors
- Siqueira, G., Bras, J., & Dufresne, A.
- Affiliations
- Institut polytechnique de Grenoble (FR)
- Corresponding author
- Dufresne, Alain
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2010-12-13
- Volume
- 2
- Issue
- 4
- Pages
- 728-765
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1980921765
- Semantic Scholar
- 88e39e80ebe121f79b7f4d6157891419553dc112
- Cited by
- 1,328
- References
- 151
- Citations by year
- 2026: 44 · 2025: 59 · 2024: 69 · 2023: 89 · 2022: 91 · 2021: 111 · 2020: 83 · 2019: 111 · 2018: 101 · 2017: 118 · 2016: 102 · 2015: 113 · 2014: 117 · 2013: 59 · 2012: 41
- FWCI
- 15.68
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cellulose nanocrystals, microfibrillated cellulose, cellulose nanoparticles, biocomposites, mechanical properties, barrier properties, packaging materials, emulsion processing, natural fibers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.