Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Open accessThe DOI matches its Crossref record; 147 of the 151 references it cites were found in a registry or an index; 5 of the 201 sources its claims cite were checked for support.
Abstract
Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC)—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have shown that cellulose nanoparticles could be used as fillers to improve mechanical and barrier properties of biocomposites. Their use for industrial packaging is being investigated, with continuous studies to find innovative solutions for efficient and sustainable systems. Processing is more and more important and different systems are detailed in this paper depending on the polymer solubility, i.e., (i) hydrosoluble systems, (ii) non-hydrosoluble systems, and (iii) emulsion systems. This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.
Overview
CoChat Summary
TL;DR
This review summarizes preparation, properties, and applications of cellulosic bionanocomposites reinforced with cellulose nanocrystals/whiskers and microfibrillated cellulose (MFC). It reports that these nanofillers can strongly improve mechanical and barrier properties, often via a percolating hydrogen-bonded network, while processing and industrial scale-up remain challenging.
Key findings
- Cellulose nanoparticles act as effective reinforcing fillers; the strong effect is generally attributed to formation of a percolating network above the percolation threshold from hydrogen bonding between nanoparticles.
- Mechanical examples include poly(S-co-BuA) latex with 30 wt% wheat straw cellulose whiskers showing a rubbery Young’s modulus more than 1000-times higher than the bulk matrix; 10 wt% cellulose palm tree whiskers in natural rubber decreased strain at break from 575% to 16%; 5 wt% MFC improved PU modulus by approximately 200% at 5 °C and close to 500% at 85 °C; and PLA-MFC modulus increased from 5 GPa at 10 wt% MFC to almost 9 GPa at 70 wt% MFC.
- Barrier properties can improve: pure MFC films had oxygen transmission rate values of 17.0 and 17.8 mL m⁻² day⁻¹; MFC coating on PLA decreased OTR from 746 to 1 mL m⁻² day⁻¹ Pa⁻¹; and 10 wt% sulfonated whiskers in xylan/sorbitol films decreased WVTR from 304 to 174 g h⁻¹ m⁻².
- Thermal behavior varies: several studies found no important Tg changes with cellulose nanofillers, while moisture, plasticization, and filler content can alter Tg and crystallinity depending on the system.
Methods
- Narrative review of cellulose nanoparticles (whiskers/nanocrystals and MFC), their preparation, characterization, properties, and applications, citing more than 150 references.
- Describes processing routes classified by polymer solubility: hydrosoluble systems, emulsion systems, and non-hydrosoluble systems, plus solvent casting, extrusion, surfactant coating, and surface chemical modification/grafting.
- No new experimental data are generated; the paper synthesizes selected published works and cites SciFinder literature trends, e.g., papers on “cellulose and nano” increased from 57 in 2000 to more than 700 in 2009.
Limitations
- The paper states that toxicity is not discussed because of “a lot of uncertainty,” that practical transition from laboratory to industrial scale is not simple and requires chemical engineering to reduce nanoparticle production costs, and that inconsistent terminology for cellulose nanoparticles causes misunderstanding and ambiguity.
- Evident from the text: as a narrative review, it summarizes “some selected works” rather than using a described systematic search or inclusion criteria, and it does not perform quantitative meta-analysis.
- Evident from the text: many property claims are drawn from cited studies rather than independently verified here, and the review notes limited reported use of cellulose nanocrystals for barrier properties and possible porosity in nanocomposite films reducing MFC efficiency.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
5 Valid · 6 Not valid · 149 Not checked · 42 Own results and interpretations
In the paper
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers. This result was surprising due to the high specific area of such nanofillers, e.g., around 170 m 2 g -1 for tunicin whiskers [139].”
- Also stated in: § 3.2. Thermal Properties · plain
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers.”
What the sources say
- Not checked — no full text of the sourcecites [139] Angles, 2000, Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3.2. Thermal Properties · plain
In the paper
“However, it seems that, at least under the conditions presented in this work, the cellulose chemical modification via grafting-from technique changes partially the cellulose crystallinity.”
What the sources say
- Not checked — no full text of the sourcecites [44] Morandi, 2009, Cellulose nanocrystals grafted with polystyrene chains through surface-initiated atom transfer radical polymerization (SI-ATRP), Langmuir source
hedgedstates a possible causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Indeed, classical predicting models for short-fiber composites cannot be applied.”
What the sources say
- Not checked — no full text of the sourcecites [71] Favier, 1995, Polymer nanocomposites reinforced by cellulose whiskers, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
What the sources say
- Not checked — no full text of the sourcecites [136] Seydibeyoglu, 2008, Novel nanocomposites based on polyurethane and micro fibrillated cellulose, Compos. Sci. Technol. source
- Not checked — no full text of the sourcecites [137] Wu, 2007, A high strength nanocomposite based on microcrystalline cellulose and polyurethane, Biomacromolecules source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“High efficiency was reached by this method that allowed esterification of cellulose nanoparticles to different extents with fatty acid chlorides.”
What the sources say
- Not checked — no full text of the sourcecites [129] Berlioz, 2009, Gas-phase surface esterification of cellulose microfibrils and whiskers, Biomacromolecules source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
108 more claims
Create a free account to see all 202 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 61
- It may state two separate claims as one. 45
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
“This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.”
§ References
“150. Saxena, A.; Ragauskas, A.J. Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan. Carbohyd. Polym. 2009 , 78 , 357-360.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ References
“23. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1296.”
§ References
“35. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1298.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3.2. Thermal Properties
“However, when bacterial cellulose nanocrystals were modified with silane groups, Tm values were founded to increase with increasing filler content. According to the authors, this difference was due to stronger interactions between silylated whiskers and PVA matrix.”
§ 3.2. Thermal Properties
“Grunert et al. [43] in their work with cellulose acetate butyrate (CAB) reinforced with bacterial cellulose nanocrystals.”
Citations
Cites
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980 · cited 1×
“[61] gives a clear overview of such cellulosic nanomaterials.”
BackgroundComposites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 5×
“The term ―natural fibers‖ is used to designate numerous kinds of fibers that are naturally produced by plants, animals and minerals [5].”
BackgroundInfluentialNishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676 · cited 1×
“Indeed lignocellulosic materials start to degrade near 220 °C restricting the type of matrix that can be used in association with natural fillers [22,101].”
BackgroundCellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493 · cited 2×
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
MethodJOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · cited 1×
“their ability to form hydrogen bonds play a major role in directing the crystalline packing and also governing the physical properties of cellulose [16].”
BackgroundAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Self-citationPääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796 · cited 1×
“[85,86] have proposed a new process to obtain MFC based on TEMPO reaction and strong mixing.”
MethodNatural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Research works printed but not linked: 9
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Nalwa, H.S. Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publisher. [2nd ed.]. in press.
- Brännvall, E. (2007). Aspect on Strength Delivery and Higher Utilisation of Strength Potential of Soft Wood Kraft Pupl Fibres. [Ph.D. Thesis, KTH, Royal Institute of Technology].
- Kroschwitz, 2003, Cellulose, Encyclopedia of Polymler Science and Technology, Volume 5, 473
- Lu, 2008, Surface modification of microfibrillated cellulose for epoxy composite applications, Polymer, 49, 1285, 10.1016/j.polymer.2008.01.028 · DOI · Paper page
- Herrick, 1983, Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci. Appl. Polym. Symp., 37, 797
- Khademhosseini, 2006, Nanobiotechnology—Drug delivery and tissue engineering, Chem. Engin. Progress, 102, 38
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
Cited by
Items 1,101–1,200 of 1,323
POLY(3-HYDROXYBUTYRATE-CO-3-HYDROXYVALERATE) - CELLULOSE NANOWHISKERS COMPOSITES BY SOLUTION CASTING
Ten, E. (2011) · Research Exchange (Washington State University) · Cited by 2
Cellulose Whisker‐Based Green Polymer Composites
Elanthikkal, S., Francis, T., Sangeetha, C., & Unnikrishnan, G. P. (2017) · Wiley eBooks · doi:10.1002/9781119441632.ch140 · Cited by 4
Park, S. (2019) · UWSpace (University of Waterloo) · Cited by 2
An interdisciplinary team approach to development of health professions education.
McPherson, C., Jk, W., & Hasbrouck, C. S. (1984) · PubMed · Cited by 2
Nanocellulose: Biomedical Nanomaterial Applications
Lin, N., & Dufresne, A. (2015) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120050596 · Cited by 4
Self-citationLignocellulosic biowaste for composite applications
Singh, H., & Chatterjee, A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91593-9.00008-0 · Cited by 1
Wang, Y., Dufresne, A., Chang, P. R., Ma, X., & Huang, J. T. (2018) · Paper and Biomaterials · doi:10.26599/pbm.2018.9260027 · Cited by 1
Self-citationShaine, M. L., Syed, I. A., & Muhammad, A. K. (2023) · Petroleum Chemistry · doi:10.31857/s0028242123040044 · Cited by 1
Polylactic Acid-Based (Nano) Composites and Their Biomedical Applications
Homavand, A., Cree, D. E., & Wilson, L. D. (2024) · Springer series on polymer and composite materials · doi:10.1007/978-3-031-69654-1_6 · Cited by 3
FABRICATION AND CHARACTERIZATION OF MICROCRYSTALLINE CELLULOSE FROM SENGON WOOD SAWDUST
Cahyani, I. M., Lukitaningsih, E., Adhyatmika, A., et al. (2024) · Cellulose Chemistry and Technology · doi:10.35812/cellulosechemtechnol.2024.58.61 · Cited by 1
Huang, F., Feng, C., Pei, H., Chen, D., He, G., Jiang, S., Wu, Z., Wang, N., & Zhu, Y. (2025) · Materials Today Sustainability · doi:10.1016/j.mtsust.2025.101110 · Cited by 1
Zheng, B., Tang, J., Nie, C., Jiang, Y., Dimde, M., Li, W., & Haag, R. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.149716 · Cited by 2
Pereira, J. F., Mali, S., & Cruz, S. A. (2026) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2026.101721 · Cited by 1
Krishnan, A., Paul, S., Phiri, R., Srisuk, R., Singh, M. K., Palaniappan, S. K., Rangappa, S. M., D., M. D. C., Ajithkumar, T. G., & Siengchin, S. (2026) · ACS Omega · doi:10.1021/acsomega.5c09694 · Cited by 5
Rocha, P. J. T., Moreira, R. A. S., Pinto, P., Durães, L. M. R., & Ferreira, P. J. (2026) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2026.110360 · Cited by 5
Bamboo-Enabled Nanomaterials for Biomedical Applications
Wang, H. (2026) · Polymers · doi:10.3390/polym18141685 · Cited by 1
“The resulting bleached fibers are subsequently processed either by acid hydrolysis or by mechanical disintegration under high-pressure shear [63].”
Fabrication and Performance Evaluation of Cellulose Nanofiber/PVA Composite Films
Mohamed, N. H. N., Takagi, H., & Nakagaito, A. N. (2015) · Advanced materials research · doi:10.4028/www.scientific.net/amr.1110.40 · Cited by 1
Recent Developments in Cellulose and Cellulose Derivatives/Clay Nanocomposites
Gonçalves, M. D. C., & Ferrarezi, M. M. F. (2013) · Springer eBooks · doi:10.1007/978-3-642-38649-7_10 · Cited by 1
Kotsuchibashi, Y., & Narain, R. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-37127-8.00005-4 · Cited by 1
Yeo, J.-S., Seong, D.-W., & Hwang, S. (2015) · Elastomers and Composites · doi:10.7473/ec.2015.50.1.062 · Cited by 1
A Delineating Procedure to Retrieve Relevant Research Areas on Nanocellulose.
Milanez, D. H., & Noyons, E. (2015) · ISSI · Cited by 1
Han, S.-Y., Park, C.-W., Kim, B.-Y., et al. (2015) · Journal of the Korean Wood Science and Technology · doi:10.5658/wood.2015.43.6.730 · Cited by 1
Danno, T., Hasegawa, E., Konosu, Y., et al. (2016) · KOBUNSHI RONBUNSHU · doi:10.1295/koron.2016-0009 · Cited by 1
Nanocompounds as Formulating Aids
Gómez-Estaca, J., Gómez-Guillén, M. C., & García, M. P. M. (2016) · Food preservation technology series/Food preservation technology · doi:10.1201/9781315373713-14 · Cited by 1
Rubber Based Bionanocomposites: Preparation and State of Art
Visakh, P. M. (2017) · Advanced structured materials · doi:10.1007/978-3-319-48806-6_1 · Cited by 1
Shabrina, A., Suryadi, H., & Sutriyo Sutriyo, S. (2019) · Pharmacognosy Journal · doi:10.5530/pj.2019.11.190 · Cited by 1
Saleh, A. K., El‐Gendy, A., Diab, M. A., & ABOUZEID, R. E. (2021) · Egyptian Journal of Chemistry · doi:10.21608/ejchem.2021.95020.4466 · Cited by 1
Cellulose nanocrystal dispersions improve cold tolerance in developing apple flowers
Arnoldussen, B., Alhamid, J. O., Mo, C., et al. (2022) · Acta Horticulturae · doi:10.17660/actahortic.2022.1346.51 · Cited by 1
Biodegradable Inorganic Nanocomposites
Matmin, J., Malek, N. A. N. N., & Sani, N. S. (2022) · Springer eBooks · doi:10.1007/978-3-030-83783-9_23-1 · Cited by 1
Balo, F., & Sagbansua, L. (2023) · Emerald Group Publishing Limited eBooks · doi:10.1108/978-1-80262-997-220231002 · Cited by 1
Liukko, S., Dimić‐Mišić, K., Ge, Y., et al. (2023) · Journal of Composites Science · doi:10.3390/jcs7080333 · Cited by 1
Singh, H., Chatterjee, A., & YADAV, N. (2023) · Cellulose Chemistry and Technology · doi:10.35812/cellulosechemtechnol.2023.57.76 · Cited by 1
Agricultural Crop Residues Biomass
Bramorski, J., Lopes, H. S. M., Barros, M. F. D. J., et al. (2023) · Springer eBooks · doi:10.1007/978-981-19-6772-6_8-1 · Cited by 1
Polysaccharide-based superabsorbent hydrogels
Nath, J., Sharma, K., Sehgal, R., Kumar, S., Sharma, V., Sehgal, R., & Kumar, V. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-99341-8.00009-0 · Cited by 1
CELLULOSE REINFORCED POLYAMIDE COMPOSITES: EFFECT OF PREPARATION METHOD ON COMPOSITE PROPERTIES
Magunga, L., Magagula, S. I., Motloung, M. T., et al. (2023) · Cellulose Chemistry and Technology · doi:10.35812/cellulosechemtechnol.2023.57.96 · Cited by 1
Thomas, S. K., Begum, P. M. S., Neenu, K. V., Dhanyasree, P., Dileep, P., Ravindran, L., Siriwong, C., Duan, Y., Badawi, M., & D., M. D. C. (2024) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-024-05647-6 · Cited by 2
Agricultural Crop Residues Biomass
Bramorski, J., Lopes, H. S. M., Barros, M. F. D. J., et al. (2024) · Springer eBooks · doi:10.1007/978-981-99-6727-8_8 · Cited by 1
Nanocelulosas a partir de biomasas con amplio potencial industrial en Costa Rica
CeNAT, C. N. D. A. T., Menezes, D. B., de Oca-Vásquez, G. M., CeNAT, C. N. D. A. T., Camacho, M., CeNAT, C. N. D. A. T., Lecot, N., CeNAT, C. N. D. A. T., Lopretti, M. I., CeNAT, C. N. D. A. T., et al. (2024) · doi:10.61728/ae20246068 · Cited by 1
Bio-nanocomposites for Food Packaging: Synthesis and Surface Properties
Aprilia, S., Fitriani, F., & Muchtar, S. (2024) · Springer series on polymer and composite materials · doi:10.1007/978-3-031-69654-1_3 · Cited by 1
Nasir, M. Z. M., Fatima, N., Khan, K. M., Zahra, D. N., Ansar, N., & Khan, S. T. (2014) · Applied Nanoscience · doi:10.1007/s13204-014-0318-1 · Cited by 1
“There are number of chemical treatments of cellulose related to fiber treatment (Siqueira et al. 2010); however, only few and recent papers have been published on nanoscale cellulose treatment due to recent development of such materials and their important differences in specific area compared to…”
BackgroundGold Nanoparticle-Reinforced Eco-friendly Polymer Nanocomposites and Their Applications
Sain, S., & Ray, D. (2015) · Advanced structured materials · doi:10.1007/978-81-322-2473-0_17 · Cited by 1
Natural Cellulose Fibers: Sources, Isolation, Properties and Applications
Mochochoko, T., Oluwafemi, O. S., Adeyemi, O. O., Jumbam, D., & Songca, S. P. (2015) · Apple Academic Press eBooks · doi:10.1201/b19859-4 · Cited by 2
Environmental and Human Health Risks
Bajpai, P. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-811101-7.00010-1 · Cited by 1
Milanez, D. H., Chanchetti, L. F., do Amaral, R. M., et al. (2014) · ABM Proceedings · doi:10.5151/1516-392x-24684 · Cited by 1
Morales‐Zamudio, L., López-Marure, A., García-Hernández, M., et al. (2019) · BioResources · doi:10.15376/biores.14.2.2513-2535 · Cited by 1
“The native crystallinity degree is usually in the range of 40% to 70% and depends on the cellulose source and isolation method (Fengel and Wegener 1989; Habibi et al. 2010; Siqueira et al. 2010; Wertz et al. 2010).”
BackgroundRecent Developments of Polymer Bionanocomposites and Bionanoceramics
Mtibe, A., Mokhena, T. C., Mokhothu, T. H., & Mochane, M. J. (2019) · Springer eBooks · doi:10.1007/978-3-030-10614-0_20-1 · Cited by 1
On the development of a continuous methodology to fractionate microfibriallated cellulose
Ghazani, M. S., Martinez, D. M., Al-Shibl, M., Madani, A., Olson, J. A., Demuner, B. J., & Kadla, J. F. (2020) · Nordic Pulp & Paper Research Journal · doi:10.1515/npprj-2019-0069 · Cited by 1
“We find that these materials have been rapidly adopted as strength additives in the paper, polymer composites, or in foamed cellulosicmaterials (Siqueira et al. 2010, Klemm et al. 2011, Lavoine et al. 2012, Cozzolino et al. 2013, Korehei et al. 2016).”
BackgroundPolymer Nanocomposite Matrix-Based Nanoproducts
AI-Jawhari, I. F. H. (2021) · Springer eBooks · doi:10.1007/978-981-15-6453-6_21-1 · Cited by 2
Obtención de nanocelulosa a partir de residuos postcosecha
Pérez, R. H., Castillo, A. Á., Paredes, A. O., & Delgado, A. M. S. (2021) · Mundo Nano Revista Interdisciplinaria en Nanociencia y Nanotecnología · doi:10.22201/ceiich.24485691e.2023.30.69662 · Cited by 7
Biodegradable Inorganic Nanocomposites
Matmin, J., Malek, N. A. N. N., & Sani, N. S. (2023) · Springer eBooks · doi:10.1007/978-3-031-09710-2_23 · Cited by 4
Composition and Application Potentials of Scandinavian Tunicates
Hassanzadeh, M. (2011) · DiVA (Digitala Vetenskapliga Arkivet) · Cited by 1
Correia, V. D. C. (2015) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.74.2015.tde-04092015-104346 · Cited by 9
Investigation of polyvinyl alcohol (PVOH) added kenaf nanowhisker and montmorillonite (MMT)
Mah, B. L. (2015) · Cited by 1
Cellulose-based composites as functional conductive materials for printed electronics
Barras, R. (2015) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 3
Thermoplastic Cellulose Nanocomposites
Karimi, S. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch5 · Cited by 2
Caracterização do compósito de borracha natural reforçado com nanocristais de celulose.
de Oliveira, L. M. (2017) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.3.2017.tde-26092017-141427 · Cited by 2
Green Resins from Plant Sources and Strengthening Mechanisms
Rahman, M. M., & Netravali, A. N. (2018) · Wiley eBooks · doi:10.1002/9781119323327.ch2 · Cited by 3
Obtenção de nanocelulose a partir de bagaço de cana-de-açúcar e incorporação em EVA.
Seixas, M. V. D. S. (2019) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.3.2019.tde-15042019-140338 · Cited by 2
Laser and ultrasound radiation pretreatment of cellulose in dissolving wood pulp.
Ocwelwang, A. R. (2017) · ResearchSpace (University of KwaZulu-Natal) · Cited by 1
Ionic Liquids as Solvents for the Production of Materials from Biomass
Hennequin, L. M., Levers, O., & Hallett, J. P. (2019) · Encyclopedia of Ionic Liquids · doi:10.1007/978-981-10-6739-6_50-1 · Cited by 1
de Souza, G. F. R. C. T. (2021) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.18.2021.tde-08102021-095559 · Cited by 1
Chaulagain, N. (2021) · ERA: Education and Research Archive (University of Alberta) · doi:10.7939/r3-jn4e-n125 · Cited by 1
Dufresne, A. (2015) · Taylor & Francis eBooks · doi:10.1081/e-enn3-120053539 · Cited by 1
Self-citationCellulose-Based Biopolymers: Formulation and Delivery Applications
Ogbonna, J. D., Kenechukwu, F. C., Chime, S. A., & Attama, A. A. (2016) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120050066 · Cited by 3
Biomedical Applications of Biocomposites Derived From Cellulose
Kundu, S., Mitra, D., & Das, M. (2022) · Wiley eBooks · doi:10.1002/9781119160182.ch13 · Cited by 2
Lema, S. P. R. (2022) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/191458 · Cited by 3
Ionic Liquids as Solvents for the Production of Materials from Biomass
Hennequin, L. M., Levers, O., & Hallett, J. P. (2022) · Encyclopedia of Ionic Liquids · doi:10.1007/978-981-33-4221-7_50 · Cited by 1
Development of alternative air filtration materials and methods of analysis
Beckman, I. P. (2023) · doi:10.21079/11681/47188 · Cited by 1
Zhang, F., Gao, M. H., Sun, D., et al. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4612583 · Cited by 1
Mesoppirr, L. S., Suter, E. K., Omwoyo, W. N., et al. (2024) · Preprints.org · doi:10.20944/preprints202402.0763.v1 · Cited by 1
Surface modifications of cellulose nanocrystals for biobased food packaging applications
Gars, M. L. (2020) · theses.fr (ABES) · doi:10.70675/872fa679z63a3z4ec3z9dc0z199a04c4f8bb · Cited by 6
Investigação do potencial celulolítico de bactérias oriundas de processo de compostagem
Kimura, G. K. (2014) · doi:10.47749/t/unicamp.2014.927055 · Cited by 1
de Lima, M. A. (2013) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.76.2013.tde-10102013-112701 · Cited by 4
Candido, R. G. (2015) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.97.2015.tde-06052015-162127 · Cited by 1
Formación de papel por medio de residuos de marea
Amaya, J. Á. S., Ballesteros, M., & Moral, A. (2015) · Biosaia: Revista de los másteres de Biotecnología Sanitaria y Biotecnología Ambiental, Industrial y Alimentaria
Processing of Soju Industrial Bioresidue to Extract Microcrystalline Cellulose and Characterization
Bhima, A. N., Park, J.-H., Cho, M., Oh, S., Myung, H., Kamala‐Kannan, S., & Oh, B. (2015) · International Polymer Processing · doi:10.3139/217.2996
“Cellulose is a linear homopolysaccharide composed of b-1,4-linked anhydroglucose units (Habibi et al., 2010; Siqueira et al., 2010).”
BackgroundPhysical Properties of Cellulose Acetate Reinforced by Cellulose Nanowhisker
Cho, H. E., Song, Y., & Kim, H. (2014) · Textile Science and Engineering · doi:10.12772/tse.2014.51.299
Synthesis and characterization of iron oxide-cellulose nanocomposite films
Mun, S., Yadav, M., Kim, J., & Kim, J. (2015) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2085287
Preliminary Preparation and Characterization Studies of Cellulose from Merbau (Intsia bijuga)
Razali, N. A. M., Aziz, F. H. A., & Rahman, S. A. (2012) · Advanced materials research · doi:10.4028/www.scientific.net/amr.620.314
Lee, J. A., Yoon, M. J., Kim, K.-Y., & Lim, D. Y. (2013) · Textile Science and Engineering · doi:10.12772/tse.2013.50.386
Fenton Pre-treatment of a Birch Kraft Pulp for MFC preparation
Hellström, P. (2015) · DiVA (Digitala Vetenskapliga Arkivet)
Yoon, A. R., Lee, M. W., Kim, S., & Kim, J. (2014) · Weed & Turfgrass Science · doi:10.5660/wts.2014.3.4.253
“식물섬유를 여러가지로 처리하여 자체만으로 또는 화학수 지와 복합시켜 새로운 기능의 소재를 만들거나, 생분해성 이 높은 수지 또는 경량화 소재 등을 개발하여 전자, 자동 차, 화장품, 의료 및 농식품용 화학소재로 활용하려는 분야 이다(Anuar and Zuraida, 2011; Faruk et al., 2012; Klemm et al., 2011; Mohanty et al., 2000; Pandy et al., 2010; Reddy et al., 2013; Siqueira et al., 2010; Thakur and Thakur, 2014).”
Povrchová modifikace mikroplniv nanočásticemi pomocí mikrovlnné syntézy
Münster, L. (2013)
Nasir, N. A. M., Anuar, H., Mel, M., Sapuan, S. M., Wahit, M. U., & Zakaria, S. (2015)
The Design of Novel Functional Materials Based on Cellulose Nanocrystals/Nanofibrils
Yang, S. (2016) · UWSpace (University of Waterloo)
Nanocrystalline Cellulose and Materials Based on It
Zakharov, A. G., Voronova, M. I., Matveeva, I. S., Isaeva, D. A., Kevina, E. V., Kotina, E. F., & Ревин, В. В. (2015) · Fibre Chemistry · doi:10.1007/s10692-016-9679-4
Ayaz, O. (2013) · Istanbul Technical University Academic Open Archive (Istanbul Technical University)
Obtenção e caracterização de PLA reforçado com nanocelulose.
Correia, C. A. (2016) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.3.2016.tde-22062016-082528 · Cited by 5
Sulaiman, H. S., Chan, C. H., Chia, C. H., Zakaria, S., & Jaafar, S. M. J. S. (2015)
Surface functionalization of cellulosic substrates by using chemical and biotechnological methods
Cusola, O. (2013) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · doi:10.5821/dissertation-2117-95351
Natural Nanofibers in Polymer Membranes for Energy Applications
Chiappone, A. (2016) · Wiley eBooks · doi:10.1002/9781118831823.ch10
Aitomäki, Y., Westin, M., Korpimäki, J., et al. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/139/1/012011
Design of Functionalized Cellulose Nanocrystals for Personal Care Applications
Awan, F. (2017) · UWSpace (University of Waterloo)
Estudos de sistemas poliméricos naturais e sintéticos utilizando técnicas avançadas de microscopia
Chimenez, T. A. (2016) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.75.2016.tde-26072016-152852
Novas perspectivas para uma biorrefinaria de cana-de-açúcar no Brasil
Novo, L. P. (2016) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.75.2016.tde-12082016-090114 · Cited by 6
Biocompósitos a partir de "polietileno verde", óleos vegetais, macro e nano fibras de curauá
de Castro, D. O. (2014) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.75.2014.tde-10122014-161805 · Cited by 3
Electrospinning and Characterization of Cellulose/Polymer Nanocomposite Fiber Mats
Šutka, A., Kukle, S., & Gravitis, J. A. (2014)
Aplicação de nanoceluloses em fibras não branqueadas para obtenção de papéis.
Cerro, J. C. (2017) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.3.2017.tde-14032017-145716
Metadata
- Authors
- Siqueira, G., Bras, J., & Dufresne, A.
- Affiliations
- Institut polytechnique de Grenoble (FR)
- Corresponding author
- Dufresne, Alain
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2010-12-13
- Volume
- 2
- Issue
- 4
- Pages
- 728-765
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1980921765
- Semantic Scholar
- 88e39e80ebe121f79b7f4d6157891419553dc112
- Cited by
- 1,328
- References
- 151
- Citations by year
- 2026: 44 · 2025: 59 · 2024: 69 · 2023: 89 · 2022: 91 · 2021: 111 · 2020: 83 · 2019: 111 · 2018: 101 · 2017: 118 · 2016: 102 · 2015: 113 · 2014: 117 · 2013: 59 · 2012: 41
- FWCI
- 15.68
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cellulose nanocrystals, microfibrillated cellulose, cellulose nanoparticles, biocomposites, mechanical properties, barrier properties, packaging materials, emulsion processing, natural fibers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.