Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Open accessThe DOI matches its Crossref record; 147 of the 151 references it cites were found in a registry or an index; 5 of the 201 sources its claims cite were checked for support.
Abstract
Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC)—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have shown that cellulose nanoparticles could be used as fillers to improve mechanical and barrier properties of biocomposites. Their use for industrial packaging is being investigated, with continuous studies to find innovative solutions for efficient and sustainable systems. Processing is more and more important and different systems are detailed in this paper depending on the polymer solubility, i.e., (i) hydrosoluble systems, (ii) non-hydrosoluble systems, and (iii) emulsion systems. This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.
Overview
CoChat Summary
TL;DR
This review summarizes preparation, properties, and applications of cellulosic bionanocomposites reinforced with cellulose nanocrystals/whiskers and microfibrillated cellulose (MFC). It reports that these nanofillers can strongly improve mechanical and barrier properties, often via a percolating hydrogen-bonded network, while processing and industrial scale-up remain challenging.
Key findings
- Cellulose nanoparticles act as effective reinforcing fillers; the strong effect is generally attributed to formation of a percolating network above the percolation threshold from hydrogen bonding between nanoparticles.
- Mechanical examples include poly(S-co-BuA) latex with 30 wt% wheat straw cellulose whiskers showing a rubbery Young’s modulus more than 1000-times higher than the bulk matrix; 10 wt% cellulose palm tree whiskers in natural rubber decreased strain at break from 575% to 16%; 5 wt% MFC improved PU modulus by approximately 200% at 5 °C and close to 500% at 85 °C; and PLA-MFC modulus increased from 5 GPa at 10 wt% MFC to almost 9 GPa at 70 wt% MFC.
- Barrier properties can improve: pure MFC films had oxygen transmission rate values of 17.0 and 17.8 mL m⁻² day⁻¹; MFC coating on PLA decreased OTR from 746 to 1 mL m⁻² day⁻¹ Pa⁻¹; and 10 wt% sulfonated whiskers in xylan/sorbitol films decreased WVTR from 304 to 174 g h⁻¹ m⁻².
- Thermal behavior varies: several studies found no important Tg changes with cellulose nanofillers, while moisture, plasticization, and filler content can alter Tg and crystallinity depending on the system.
Methods
- Narrative review of cellulose nanoparticles (whiskers/nanocrystals and MFC), their preparation, characterization, properties, and applications, citing more than 150 references.
- Describes processing routes classified by polymer solubility: hydrosoluble systems, emulsion systems, and non-hydrosoluble systems, plus solvent casting, extrusion, surfactant coating, and surface chemical modification/grafting.
- No new experimental data are generated; the paper synthesizes selected published works and cites SciFinder literature trends, e.g., papers on “cellulose and nano” increased from 57 in 2000 to more than 700 in 2009.
Limitations
- The paper states that toxicity is not discussed because of “a lot of uncertainty,” that practical transition from laboratory to industrial scale is not simple and requires chemical engineering to reduce nanoparticle production costs, and that inconsistent terminology for cellulose nanoparticles causes misunderstanding and ambiguity.
- Evident from the text: as a narrative review, it summarizes “some selected works” rather than using a described systematic search or inclusion criteria, and it does not perform quantitative meta-analysis.
- Evident from the text: many property claims are drawn from cited studies rather than independently verified here, and the review notes limited reported use of cellulose nanocrystals for barrier properties and possible porosity in nanocomposite films reducing MFC efficiency.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
5 Valid · 6 Not valid · 149 Not checked · 42 Own results and interpretations
In the paper
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers. This result was surprising due to the high specific area of such nanofillers, e.g., around 170 m 2 g -1 for tunicin whiskers [139].”
- Also stated in: § 3.2. Thermal Properties · plain
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers.”
What the sources say
- Not checked — no full text of the sourcecites [139] Angles, 2000, Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3.2. Thermal Properties · plain
In the paper
“However, it seems that, at least under the conditions presented in this work, the cellulose chemical modification via grafting-from technique changes partially the cellulose crystallinity.”
What the sources say
- Not checked — no full text of the sourcecites [44] Morandi, 2009, Cellulose nanocrystals grafted with polystyrene chains through surface-initiated atom transfer radical polymerization (SI-ATRP), Langmuir source
hedgedstates a possible causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Indeed, classical predicting models for short-fiber composites cannot be applied.”
What the sources say
- Not checked — no full text of the sourcecites [71] Favier, 1995, Polymer nanocomposites reinforced by cellulose whiskers, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
What the sources say
- Not checked — no full text of the sourcecites [136] Seydibeyoglu, 2008, Novel nanocomposites based on polyurethane and micro fibrillated cellulose, Compos. Sci. Technol. source
- Not checked — no full text of the sourcecites [137] Wu, 2007, A high strength nanocomposite based on microcrystalline cellulose and polyurethane, Biomacromolecules source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“High efficiency was reached by this method that allowed esterification of cellulose nanoparticles to different extents with fatty acid chlorides.”
What the sources say
- Not checked — no full text of the sourcecites [129] Berlioz, 2009, Gas-phase surface esterification of cellulose microfibrils and whiskers, Biomacromolecules source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
108 more claims
Create a free account to see all 202 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 61
- It may state two separate claims as one. 45
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
“This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.”
§ References
“150. Saxena, A.; Ragauskas, A.J. Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan. Carbohyd. Polym. 2009 , 78 , 357-360.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ References
“23. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1296.”
§ References
“35. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1298.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3.2. Thermal Properties
“However, when bacterial cellulose nanocrystals were modified with silane groups, Tm values were founded to increase with increasing filler content. According to the authors, this difference was due to stronger interactions between silylated whiskers and PVA matrix.”
§ 3.2. Thermal Properties
“Grunert et al. [43] in their work with cellulose acetate butyrate (CAB) reinforced with bacterial cellulose nanocrystals.”
Citations
Cites
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980 · cited 1×
“[61] gives a clear overview of such cellulosic nanomaterials.”
BackgroundComposites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 5×
“The term ―natural fibers‖ is used to designate numerous kinds of fibers that are naturally produced by plants, animals and minerals [5].”
BackgroundInfluentialNishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676 · cited 1×
“Indeed lignocellulosic materials start to degrade near 220 °C restricting the type of matrix that can be used in association with natural fillers [22,101].”
BackgroundCellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493 · cited 2×
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
MethodJOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · cited 1×
“their ability to form hydrogen bonds play a major role in directing the crystalline packing and also governing the physical properties of cellulose [16].”
BackgroundAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Self-citationPääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796 · cited 1×
“[85,86] have proposed a new process to obtain MFC based on TEMPO reaction and strong mixing.”
MethodNatural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Research works printed but not linked: 9
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Nalwa, H.S. Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publisher. [2nd ed.]. in press.
- Brännvall, E. (2007). Aspect on Strength Delivery and Higher Utilisation of Strength Potential of Soft Wood Kraft Pupl Fibres. [Ph.D. Thesis, KTH, Royal Institute of Technology].
- Kroschwitz, 2003, Cellulose, Encyclopedia of Polymler Science and Technology, Volume 5, 473
- Lu, 2008, Surface modification of microfibrillated cellulose for epoxy composite applications, Polymer, 49, 1285, 10.1016/j.polymer.2008.01.028 · DOI · Paper page
- Herrick, 1983, Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci. Appl. Polym. Symp., 37, 797
- Khademhosseini, 2006, Nanobiotechnology—Drug delivery and tissue engineering, Chem. Engin. Progress, 102, 38
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
Cited by
Items 1,001–1,100 of 1,323
Recent Developments in Food-Based Bioplastics Production
Srinivasan, B., & Kulshreshtha, G. (2020) · The handbook of environmental chemistry · doi:10.1007/698_2020_578 · Cited by 5
Wan, C., & Li, J. (2015) · Fibers and Polymers · doi:10.1007/s12221-015-1230-3 · Cited by 6
THE POTENTIAL OF OPTICAL TWEEZER (OT) FOR VISCOELASTIVITY MEASUREMENT OF NANOCELLULOSE SOLUTION
Aziz, W. N. S. W., Ayop, S. K., & Riyanto, S. (2015) · Jurnal Teknologi · doi:10.11113/jt.v74.4722 · Cited by 4
Jang, J., Lee, S. H., & Kim, N. (2014) · Journal of the Korean Wood Science and Technology · doi:10.5658/wood.2014.42.4.483 · Cited by 4
Paper Properties Improvement by adding Microfibrillated Cellulose-Mineral Composites
Lee, J. M. (2016) · Journal of Korea Technical Association of The Pulp and Paper Industry · doi:10.7584/ktappi.2016.48.2.083 · Cited by 4
Extraction and structural characterization of cellulose from milkweed floss
Maheswari, C. U., Reddy, K. O., Dhlamini, M. S., et al. (2017) · Separation Science and Technology · doi:10.1080/01496395.2017.1374406 · Cited by 4
Reactive supramolecular filler for elastomer reinforcement
Tan, X., Zhao, Y., Qian, M., et al. (2017) · Polymer · doi:10.1016/j.polymer.2017.09.024 · Cited by 4
Dimensionally stable cellulosic aerogels functionalized by titania
Postnova, I. V., Khlebnikov, O. N., Silant’ev, V. E., & Shchipunov, Y. A. (2018) · Pure and Applied Chemistry · doi:10.1515/pac-2018-0706 · Cited by 6
Adhesion and Surface Issues in Biocomposites and Bionanocomposites
Jose, C., Thomas, M. S., Deepa, B., Pothan, L. A., & Thomas, S. (2015) · Wiley eBooks · doi:10.1002/9781119162346.ch6 · Cited by 4
NANOCELLULOSE: PREPARATION, CHARACTERIZATION, SUPRAMOLECULAR MODELING, AND ITS LIFE CYCLE ASSESSMENT
Li, Q. Q. (2012) · VTechWorks (Virginia Tech) · Cited by 10
Preparation, isolation and characterization of nanocellulose from sugarcane bagasse
Mashego, D. V. (2016) · DUT Open Scholar (Durban University of Technology) · doi:10.51415/10321/1711 · Cited by 6
Nanocrystalline Cellulose: Green, Multifunctional and Sustainable Nanomaterials
Bagheri, S., Julkapli, N. M., & Mansouri, N. (2017) · Wiley eBooks · doi:10.1002/9781119441632.ch142 · Cited by 6
Role of Cellulose Nanofibrils in Polymer Nanocomposites
Maia, T. H. S., Calazans, M. O., de Lima, V. H., Moreira, F. K. V., & Lucas, A. D. A. (2019) · Wiley eBooks · doi:10.1002/9783527807437.ch8 · Cited by 5
Solid‐State Batteries with Polymer Electrolytes
Iojoiu, C., & Paillard, E. E. (2020) · Wiley eBooks · doi:10.1002/9783527610426.bard110014 · Cited by 6
Specificity of Thermal Destruction of Nonwoven Mixture Systems Based on Bast and Viscose Fibers
Kalauova, A. S., Palchikova, E. E., Makarov, I., Shandryuk, G. А., Abilkhairov, A. I., Kalimanova, D. Z., Naukenov, M. Z., Shambilova, G. K., Novikov, E. M., Song, J., et al. (2025) · Polymers · doi:10.3390/polym17091223 · Cited by 3
“It is interesting to note that, in polymer composite systems, the concentration range of 40–60% is a boundary region, where it is difficult to predict the properties of the resulting composition [74,75], and a similar situation is observed in the presented mixed systems.”
Understanding interactions of pharmaceutical pollutants with cellulosic materials
Vuoriluoto, M., Tammelin, T., & Orelma, H. (2025) · Cellulose · doi:10.1007/s10570-025-06634-4 · Cited by 3
“Cellulose nanofibrils and cellulose nanocrystals are emerging as effective adsorbent materials for pharmaceutical residues (Siqueira et al. 2010).”
Kamiuchi, N., Hikima, Y., Koshino, M., & Sakakibara, K. (2025) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2025.109317 · Cited by 3
Ji, S., Fu, X., Zhang, Y., et al. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.122095 · Cited by 3
Parhizgar, M., Azadfallah, M., Kaboorani, A., Mastouri, A., & Frigione, M. (2026) · Polymers · doi:10.3390/polym18020175 · Cited by 3
“Cellulose, the most abundant natural biomass, is extracted from plant fibers and possesses a hierarchical structure that allows for the production of nanoscale fillers such as cellulose nanocrystals [12].”
Zhu, Y., Wu, H., Yang, W., et al. (2026) · Food Chemistry X · doi:10.1016/j.fochx.2026.103705 · Cited by 3
“This improvement can be attributed to the overall reinforcement of SPI through the introduction of nanofillers and formation of physical or chemical forces, causing reinforcement (Siqueira et al., 2010).”
AI-Powered Innovations in Natural Fiber Packaging for Sustainability
Mann, G. S., Singh, B., Alzahrani, K. A., Khan, A., Kumar, R. R., Patil, A. Y., & Keshta, B. E. (2026) · Journal of Natural Fibers · doi:10.1080/15440478.2026.2640280 · Cited by 6
Polyester–melamine coil coating formulation reinforced with surface-modified cellulose nanofibrils
Leggieri, M. R. T., Deltin, T., Wärnheim, A., et al. (2023) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2023.107608 · Cited by 3
Oyekale, J. O. (2023) · Bitlis Eren University Journal of Science and Technology · doi:10.17678/beuscitech.1233168 · Cited by 3
Karak, N. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-19074-2.00001-0 · Cited by 4
Production of nanocellulose from lignocellulosic biomass and its potential applications: A review
Khan, M. N., Sharif, A., Farooqi, Z. H., Rehman, N., Ahmed, E., Din, M. I., Tariq, M., Iqbal, R., Basuliman, O. A., Ali, I., et al. (2024) · Global NEST Journal · doi:10.30955/gnj.005604 · Cited by 10
“2023, Siqueira et al .”
A holistic approach toward the maximum conversion of lignocellulose into biofuels
Tyagi, A., Banerjee, B., & Tyagi, S. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-21433-2.00014-1 · Cited by 5
Aydemir, D., Sözen, E., Kayahan, K., et al. (2025) · Advances in Polymer Technology · doi:10.1155/adv/7105141 · Cited by 3
Emami, H., Mahmoodi, Y., Shahriari, M., et al. (2025) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2025.128304 · Cited by 3
Hemp Fibres and Shives, Nano- and Micro-Composites
Kukle, S., Putniņa, A., & Gravitis, J. A. (2015) · World sustainability series · doi:10.1007/978-3-319-14883-0_22 · Cited by 3
Preparation of Polyimide–Cellulose Composite Using Oligoimide with Ethynyl Terminals
Shirata, T., Kon, T., Sasaki, K., Oishi, Y., & Shibasaki, Y. (2014) · Chemistry Letters · doi:10.1246/cl.140072 · Cited by 3
Some Properties of Polycaprolactone Composites with Cellulose Nanocrystals
Surov, O. V., Lebedeva, E. O., Rubleva, N. V., et al. (2021) · Russian Journal of General Chemistry · doi:10.1134/s1070363221050170 · Cited by 3
Sustainable Product Packaging Using Vegetables Fibres and Its Composite
Singh, G., Sharma, S., Sandhu, K., Asiri, A. M., & Khan, A. (2021) · Composites science and technology · doi:10.1007/978-981-16-1854-3_12 · Cited by 3
Karp, S. G., Pagnoncelli, M. G. B., do Prado, F. G., et al. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821888-4.00007-1 · Cited by 3
Polycaprolactones based bionanocomposites for food packaging applications
Samykannu, M. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-88528-7.00001-0 · Cited by 3
Thermoformable fiberboards of wood pulp and nanofibrillated cellulose
Chiromito, E. M. S., Trovatti, E., & Carvalho, A. J. F. (2022) · Industrial Crops and Products · doi:10.1016/j.indcrop.2022.115433 · Cited by 3
Food Packaging Applications for Biorenewable-Based Nanomaterials
Yadav, G., & Ahmaruzzaman, M. (2022) · ACS symposium series · doi:10.1021/bk-2022-1410.ch010 · Cited by 3
Bosu, S., Rajamohan, N., Lam, S. S., & Vasseghian, Y. (2023) · Reviews of Environmental Contamination and Toxicology · doi:10.1007/s44169-023-00043-z · Cited by 5
Geris, R., Calil, S., Rigoli, I. C., Vidal, R. R. L., da Silva, A. F., & Malta, M. (2023) · Engineering materials · doi:10.1007/978-3-031-46545-1_19 · Cited by 5
K, B. S. T., Chandra, C. S. J., Sasi, S., & Arundhathi, C. K. (2024) · Springer eBooks · doi:10.1007/978-981-99-6727-8_22 · Cited by 10
Soares, V. D. M., dos Reis, A. C., & Valente, M. L. D. C. (2025) · Cellulose · doi:10.1007/s10570-025-06763-w · Cited by 3
“…of cellulose nanomaterials (CNs) enhances crystallinity, chemical stability, surface area, dispersibility, reactivity (Habibi et al. 2010; Siqueira et al. 2010; Moon et al. 2011; Dufresne 2013; Yang et al. 2023; Yusuf et al. 2024), and crosslinking ability (Habibi et al. 2010; Siqueira…”
InfluentialKusumaningrum, W. B., Amanda, P., Suryanegara, L., & Masruchin, N. (2020) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/572/1/012044 · Cited by 3
Dasan, Y. K., Bhat, A. H., & Faiz, A. (2015) · AIP conference proceedings · doi:10.1063/1.4919196 · Cited by 3
Cellulose nanoparticles: photoacoustic contrast agents that biodegrade to simple sugars
Jokerst, J. V., Bohndiek, S. E., & Gambhir, S. S. (2014) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2036256 · Cited by 3
Morphological Characteristics of Weed Seed Fibers
Yoon, A. R., Lee, M. W., Kim, S. K., & Kim, J. (2014) · Weed & Turfgrass Science · doi:10.5660/wts.2014.3.3.196 · Cited by 3
“이들 중 최근 가장 관심을 받고 있는 것은 바이오복합재료(bio-composite) 연구분야, 즉 식물의 고분자물질(전분, 셀룰로오스, 다당류, 리그닌 등)을 자체만으로 또는 화학수지와 복합시켜 새로 운 기능의 소재를 만들거나, 생분해성이 높은 수지 또는 경 량화 소재 등을 개발하여 전자, 자동차, 화장품, 의료 및 농 식품용 화학소재로 활용하려는 분야이다(Faruk et al., 2012; Klemm et al., 2011; Mohanty et al., 2000; Pandey et al., 2010; Reddy et al., 2013; Siqueira et al.…”
An eco-friendly composite adsorbent for efficient removal of Cu2+ from aqueous solution
Luo, Z., Zhang, J., Zhuang, C., Tu, S., Yin, Y., & Ye, L. (2015) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2015.11.014 · Cited by 3
Jo, Y.-J., Cho, H.-J., Chun, S., et al. (2015) · Journal of the Korean Wood Science and Technology · doi:10.5658/wood.2015.43.6.740 · Cited by 3
Grafted Nanocellulose as an Advanced Smart Biopolymer
Bagheri, S., & Julkapli, N. M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-323-48104-5.00012-3 · Cited by 7
REINFORCEMENT OF RUBBER USING REACTIVE OLIGO(β-ALANINE) SUPRAMOLECULAR FILLERS
Tan, X., Zhao, Y., Hamed, G. R., et al. (2019) · Rubber Chemistry and Technology · doi:10.5254/rct.19.81531 · Cited by 3
Bio-nanocomposite IPN for Biomedical Application
Ismail, N. A., & Razali, M. H. (2020) · Springer eBooks · doi:10.1007/978-981-15-0283-5_12 · Cited by 4
Green composites for food packaging
Bajpai, A. K., Chouksey, S., & Raj, V. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-99643-3.00001-2 · Cited by 5
Nanocellulose‐Reinforced Polymer Matrix Composites Fabricated by In‐Situ Polymerization Technique
Ray, D., & Sain, S. (2014) · Wiley eBooks · doi:10.1002/9781118872246.ch5 · Cited by 4
X‐Ray Photoelectron Spectroscopy: A Tool for Studying Biopolymers
do Rego, A. M. B., Ferraria, A. M., Vilar, M. R., & Boufi, S. (2013) · Wiley eBooks · doi:10.1002/9783527652457.ch16 · Cited by 3
Nanocellulose extraction and surface modification toward active packaging applications
Wu, Y. (. S. I. B. E. (2017) · MOspace Institutional Repository (University of Missouri) · doi:10.32469/10355/63577 · Cited by 4
Challenges with Biomass Waste Valorisation
Yan, G., Feng, Y., Long, S., et al. (2020) · doi:10.1002/9781119502753.ch8 · Cited by 3
Wang, Y., Yang, J., Song, Y., et al. (2022) · Research Square · doi:10.21203/rs.3.rs-1977044/v1 · Cited by 3
Polyvinyl Alcohol/Cellulose‐Based Biocomposites and Bionanocomposites
Awang, N. A., Mohamed, M. A., & Salleh, W. N. W. (2023) · doi:10.1002/9781119593218.ch4 · Cited by 3
Preparation and modification of thermoplastic/tannins composites via reactive extrusion
Liao, J. (2019) · theses.fr (ABES) · doi:10.70675/8d1a6e89z3396z48e6z9489z3ddf75eba0e4 · Cited by 4
Polymer Nanocomposite Matrix-Based Nanoproducts
AI-Jawhari, I. F. H. (2022) · Springer eBooks · doi:10.1007/978-981-16-8698-6_21 · Cited by 2
Plasticized Agar-Carboxymethyl Cellulose Based Composites Properties Reinforced with Nanocellulose
Pourghasemi-Soufiani, V., & Amidi-Fazli, F. (2025) · JOURNAL OF RENEWABLE MATERIALS · doi:10.32604/jrm.2025.02024-0009 · Cited by 2
Pan, S., Tian, G., Su, Z., Shen, Z., Zhou, J., Yang, L., Cui, Z., Zhang, Z., Gao, Q., & Cai, H. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.121695 · Cited by 4
Rheological Design and Applications of Cellulose Nanofiber in Additive Manufacturing
Shin, S. (2025) · Journal of Korea Technical Association of The Pulp and Paper Industry · doi:10.7584/jktappi.2025.8.57.4.19 · Cited by 2
A hybrid cellulose nano-crystals cyanobacterial living material improves soil crust rehabilitation
Belsey, S., Shoseyov, O., Zer, H., Yochelis, S., Paltiel, Y., Keren, N., & Shoseyov, O. (2025) · Environmental Technology & Innovation · doi:10.1016/j.eti.2025.104501 · Cited by 3
Thermoresponsive Gels Based on Cross-Linked Polymer-Grafted Cellulose Nanocrystals
Folkesson, M., Wesseler, J. P., Pierucci, C., Rader, C., Weder, C., Ianiro, A., & Berrocal, J. A. (2026) · Biomacromolecules · doi:10.1021/acs.biomac.5c02262 · Cited by 4
Kim, J., Ko, H., & Kim, H. C. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.606008 · Cited by 2
“Peaks at 3,390 and 3,425 cm−1 correspond to hydrogenbonded O-H peaks from CNC (Siqueira et al., 2010).”
BackgroundMontmorillonite-Chitosan based Nano-Composites and Applications
Parhi, R. (2022) · Materials research foundations · doi:10.21741/9781644901915-3 · Cited by 4
Polymeric Nanoparticles in Drug Delivery
Parashar, K., & Khan, M. A. (2023) · Advances in medical diagnosis, treatment, and care (AMDTC) book series · doi:10.4018/979-8-3693-0448-8.ch005 · Cited by 2
Advances in Research on Cellulose-based Drug Carriers
Yang, M., Zhang, Y., Liu, Z., Liu, L., Wang, X., & Qian, L. (2023) · Paper and Biomaterials · doi:10.26599/pbm.2023.9260026 · Cited by 2
Fang, C., Xu, K., Li, T., Qian, G., Li, D., & Chen, C. (2024) · High Performance Polymers · doi:10.1177/09540083241247490 · Cited by 2
Hybrid nanoparticles in building materials
Patra, N., Latha, T. H., & Salerno, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-99132-2.00011-x · Cited by 2
Cellulose Based Rubber Blends and Microcomposites
Sahila, S., Jayakumari, L. S., Sampath, P. S., Palanisamy, S., & Palaniappan, M. (2024) · Advanced structured materials · doi:10.1007/978-981-10-2978-3_3 · Cited by 3
Yang, X., Wang, W., Long, M., Xiang, L., Cao, Y., & Hao, J. (2024) · Polymer Composites · doi:10.1002/pc.29085 · Cited by 2
“29 For example, polyoxyethylene (10) nonylphenyl ether (PNE) surfactant was applied to coat MFCs by Iwamoto et al. The surfactant coating led to a uniform distribution of MFCs in polypropylene.”
do Prado, F. N. F., Gomes, M. G., Bernardo, M. P., et al. (2025) · JOURNAL OF RENEWABLE MATERIALS · doi:10.32604/jrm.2025.02024-0014 · Cited by 2
“The band at 1230 cm − 1 is related to the asymmetric deformation of = C-O-C, typical of phenol, ether, and esters [42].”
Mendes, J. F., Silva, M. J., Evangelista, N. C., Lopes, L. D. P., Martins, M. A., Mendes, R. F., & Mattoso, L. H. C. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.143905 · Cited by 4
Jiménez, J. A. V., Moigne, N. L., Taguet, A., Sauceau, M., Sescousse, R., Espitalier, F., Bénézet, J., & Fages, J. (2025) · Cellulose · doi:10.1007/s10570-025-06566-z · Cited by 2
“Values ranging between 2 and 3 were found, which have been already reported for neat PLA (Iannace and Nicolais 1996; Tsuji et al. 2006; Pei et al. 2010; Siqueira et al. 2010; Liu et al. 2012).”
Žigon, J., Poljanšek, I., Oven, P., et al. (2025) · Cellulose · doi:10.1007/s10570-025-06606-8 · Cited by 2
“…are gaining attention as a reinforcing material in thermoplastic matrices due to their numerous advantages, such as renewability, low density, high tensile strength, large specific surface area, biodegradability, transparency, and gas barrier properties (Jonoobi et al. 2010; Siqueira et al. 2010).”
Martínez‐Sanz, M., López‐Rubio, A., Fabra, M. J., & Lagaron, J. M. (2014) · JOURNAL OF RENEWABLE MATERIALS · doi:10.7569/jrm.2014.634106 · Cited by 2
Caiping, L. (2021) · Composites and Advanced Materials · doi:10.1177/26349833211024659 · Cited by 2
Nanocellulose-Based Materials for Heavy Metal Removal from Wastewater
Awang, N. A., Salleh, W. N. W., Yusof, N. B., Karim, Z. A., & Ismail, A. F. (2021) · Environmental chemistry for a sustainable world · doi:10.1007/978-3-030-73010-9_1 · Cited by 2
Nanocellulose as Reinforcement Materials for Polymer Matrix Composites
Punia, H., Tokas, J., Bhadu, S., Rani, A., Sangwan, S., Kamboj, A., Yashveer, S., & Baloda, S. (2021) · Springer eBooks · doi:10.1007/978-3-030-62976-2_25-1 · Cited by 2
Organic antimicrobial nanomaterials and reducing copper use in sustainable plant protection
Balestra, G. M., Lorenzo, V. D., & Fortunati, E. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823394-8.00008-1 · Cited by 4
Nanocellulose applications in packaging materials
Yasim‐Anuar, T. A. T., Ariffin, H., Padzil, F. N. M., Sharip, N. S., Ng, L. Y. F., Shazleen, S. S., Megashah, L. N., Abd-Rahim, N. F., & Hassan, M. A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-89909-3.00003-1 · Cited by 7
Speight, J. G. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-821679-8.00008-9 · Cited by 2
Karakterisasi selulosa kulit rotan sebagai material pengganti fiber glass pada komposit
Nikmatin, S., Purwanto, Y. A., Mandang, T., et al. (2012) · Cited by 2
Uddin, M. H., & Haque, M. M. (2023) · Scholars International Journal of Chemistry and Material Sciences · doi:10.36348/sijcms.2023.v06i01.002 · Cited by 3
Fabrication of Cr2O3 Nanoparticles Using Okra Plant Extract for Antimicrobial Activity
Ali, S. Q., Aziz, W. J., & Sabry, R. S. (2022) · Journal of Kufa Physics · doi:10.31257/2018/jkp/2021/130206 · Cited by 2
Advances in the Production of Cellulose Nanomaterials and Their Use in Engineering (Bio)Plastics
Banvillet, G., Bugaut, M., Doineau, E., Taguet, A., Moigne, N. L., & Rojas, O. J. (2023) · Composites science and technology · doi:10.1007/978-981-99-2473-8_12 · Cited by 2
Lavoine, N. (2023) · Springer handbooks · doi:10.1007/978-3-030-27322-4_27 · Cited by 2
Cahyani, I. M., Adhyatmika, A., Lukitaningsih, E., et al. (2023) · Science & Technology Indonesia · doi:10.26554/sti.2023.8.4.666-674 · Cited by 2
Sources and Applications of Nano Cellulose Tailored Materials
Kirtania, M. D., Chakraborty, S., Barik, A., & Dey, S. (2024) · Nanotechnology and nanomaterials. · doi:10.5772/intechopen.113935 · Cited by 5
Cationic Nanosorbents Biopolymers: Versatile Materials for Environmental Cleanup
Shukla, S. K., Choubey, R., & Bajpai, A. K. (2017) · Springer series on polymer and composite materials · doi:10.1007/978-3-319-68708-7_4 · Cited by 2
Wang, L. (2017) · DigitalCommons (California Polytechnic State University) · Cited by 4
Incorporation of Filler/Additives in Polymer Gel for Advanced Application
Muhamad, I. I., Salleh, E., Shaharuddin, S., Pa’e, N., Selvakumaran, S., & Salehudin, M. H. (2018) · Gels horizons: from science to smart materials · doi:10.1007/978-981-10-6086-1_12 · Cited by 2
Giorgio, E. M., Villalba, L. L., Robledo, G., et al. (2018) · Revista de Biología Tropical · doi:10.15517/rbt.v66i3.30589 · Cited by 2
Dissolution of LAS Micronized-residues with Sodium Chlorite
Choi, H.-S., & Lee, J. M. (2018) · Journal of Korea Technical Association of The Pulp and Paper Industry · doi:10.7584/jktappi.2018.12.50.6.5 · Cited by 2
Zakharov, A. G., Voronova, M. I., Surov, O. V., Rubleva, N. V., & Афинеевский, А. В. (2018) · Fibre Chemistry · doi:10.1007/s10692-019-09977-4 · Cited by 2
Cellulose Nanocrystals: Particles and Polymer Nanocomposites
Abdallah, W., & Kamal, M. R. (2019) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.3139/9781569906361.014 · Cited by 3
Li, Q., Li, Y., Jin, Z., et al. (2021) · Molecules · doi:10.3390/molecules26113201 · Cited by 2
“Cellulose is the most abundant, renewable, and biodegradable natural polymer on Earth [2,3].”
BackgroundRecent Advances in Nanocomposites Based on Biodegradable Polymers and Nanocellulose
Morán, J., Ludueña, L. N., & Álvarez, V. A. (2014) · Wiley eBooks · doi:10.1002/9781118872246.ch9 · Cited by 2
Cellulose Nanocrystals: Nanostrength for Industrial and Biomedical Applications
Kumar, A., & Negi, Y. S. (2014) · Wiley eBooks · doi:10.1002/9781118872246.ch15 · Cited by 5
Surface Modification of Natural and Synthetic Polymeric Fibers for TiO2‐Based Nanocomposites
Almeida, N. A. F., da Silva, P. R., Gonçalves, G., & Marques, P. A. A. P. (2015) · doi:10.1002/9783527670260.ch8 · Cited by 2
Metadata
- Authors
- Siqueira, G., Bras, J., & Dufresne, A.
- Affiliations
- Institut polytechnique de Grenoble (FR)
- Corresponding author
- Dufresne, Alain
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2010-12-13
- Volume
- 2
- Issue
- 4
- Pages
- 728-765
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1980921765
- Semantic Scholar
- 88e39e80ebe121f79b7f4d6157891419553dc112
- Cited by
- 1,328
- References
- 151
- Citations by year
- 2026: 44 · 2025: 59 · 2024: 69 · 2023: 89 · 2022: 91 · 2021: 111 · 2020: 83 · 2019: 111 · 2018: 101 · 2017: 118 · 2016: 102 · 2015: 113 · 2014: 117 · 2013: 59 · 2012: 41
- FWCI
- 15.68
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cellulose nanocrystals, microfibrillated cellulose, cellulose nanoparticles, biocomposites, mechanical properties, barrier properties, packaging materials, emulsion processing, natural fibers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.