Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Open accessThe DOI matches its Crossref record; 147 of the 151 references it cites were found in a registry or an index; 5 of the 201 sources its claims cite were checked for support.
Abstract
Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC)—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have shown that cellulose nanoparticles could be used as fillers to improve mechanical and barrier properties of biocomposites. Their use for industrial packaging is being investigated, with continuous studies to find innovative solutions for efficient and sustainable systems. Processing is more and more important and different systems are detailed in this paper depending on the polymer solubility, i.e., (i) hydrosoluble systems, (ii) non-hydrosoluble systems, and (iii) emulsion systems. This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.
Overview
CoChat Summary
TL;DR
This review summarizes preparation, properties, and applications of cellulosic bionanocomposites reinforced with cellulose nanocrystals/whiskers and microfibrillated cellulose (MFC). It reports that these nanofillers can strongly improve mechanical and barrier properties, often via a percolating hydrogen-bonded network, while processing and industrial scale-up remain challenging.
Key findings
- Cellulose nanoparticles act as effective reinforcing fillers; the strong effect is generally attributed to formation of a percolating network above the percolation threshold from hydrogen bonding between nanoparticles.
- Mechanical examples include poly(S-co-BuA) latex with 30 wt% wheat straw cellulose whiskers showing a rubbery Young’s modulus more than 1000-times higher than the bulk matrix; 10 wt% cellulose palm tree whiskers in natural rubber decreased strain at break from 575% to 16%; 5 wt% MFC improved PU modulus by approximately 200% at 5 °C and close to 500% at 85 °C; and PLA-MFC modulus increased from 5 GPa at 10 wt% MFC to almost 9 GPa at 70 wt% MFC.
- Barrier properties can improve: pure MFC films had oxygen transmission rate values of 17.0 and 17.8 mL m⁻² day⁻¹; MFC coating on PLA decreased OTR from 746 to 1 mL m⁻² day⁻¹ Pa⁻¹; and 10 wt% sulfonated whiskers in xylan/sorbitol films decreased WVTR from 304 to 174 g h⁻¹ m⁻².
- Thermal behavior varies: several studies found no important Tg changes with cellulose nanofillers, while moisture, plasticization, and filler content can alter Tg and crystallinity depending on the system.
Methods
- Narrative review of cellulose nanoparticles (whiskers/nanocrystals and MFC), their preparation, characterization, properties, and applications, citing more than 150 references.
- Describes processing routes classified by polymer solubility: hydrosoluble systems, emulsion systems, and non-hydrosoluble systems, plus solvent casting, extrusion, surfactant coating, and surface chemical modification/grafting.
- No new experimental data are generated; the paper synthesizes selected published works and cites SciFinder literature trends, e.g., papers on “cellulose and nano” increased from 57 in 2000 to more than 700 in 2009.
Limitations
- The paper states that toxicity is not discussed because of “a lot of uncertainty,” that practical transition from laboratory to industrial scale is not simple and requires chemical engineering to reduce nanoparticle production costs, and that inconsistent terminology for cellulose nanoparticles causes misunderstanding and ambiguity.
- Evident from the text: as a narrative review, it summarizes “some selected works” rather than using a described systematic search or inclusion criteria, and it does not perform quantitative meta-analysis.
- Evident from the text: many property claims are drawn from cited studies rather than independently verified here, and the review notes limited reported use of cellulose nanocrystals for barrier properties and possible porosity in nanocomposite films reducing MFC efficiency.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
5 Valid · 6 Not valid · 149 Not checked · 42 Own results and interpretations
In the paper
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers. This result was surprising due to the high specific area of such nanofillers, e.g., around 170 m 2 g -1 for tunicin whiskers [139].”
- Also stated in: § 3.2. Thermal Properties · plain
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers.”
What the sources say
- Not checked — no full text of the sourcecites [139] Angles, 2000, Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3.2. Thermal Properties · plain
In the paper
“However, it seems that, at least under the conditions presented in this work, the cellulose chemical modification via grafting-from technique changes partially the cellulose crystallinity.”
What the sources say
- Not checked — no full text of the sourcecites [44] Morandi, 2009, Cellulose nanocrystals grafted with polystyrene chains through surface-initiated atom transfer radical polymerization (SI-ATRP), Langmuir source
hedgedstates a possible causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Indeed, classical predicting models for short-fiber composites cannot be applied.”
What the sources say
- Not checked — no full text of the sourcecites [71] Favier, 1995, Polymer nanocomposites reinforced by cellulose whiskers, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
What the sources say
- Not checked — no full text of the sourcecites [136] Seydibeyoglu, 2008, Novel nanocomposites based on polyurethane and micro fibrillated cellulose, Compos. Sci. Technol. source
- Not checked — no full text of the sourcecites [137] Wu, 2007, A high strength nanocomposite based on microcrystalline cellulose and polyurethane, Biomacromolecules source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“High efficiency was reached by this method that allowed esterification of cellulose nanoparticles to different extents with fatty acid chlorides.”
What the sources say
- Not checked — no full text of the sourcecites [129] Berlioz, 2009, Gas-phase surface esterification of cellulose microfibrils and whiskers, Biomacromolecules source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
108 more claims
Create a free account to see all 202 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 61
- It may state two separate claims as one. 45
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
“This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.”
§ References
“150. Saxena, A.; Ragauskas, A.J. Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan. Carbohyd. Polym. 2009 , 78 , 357-360.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ References
“23. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1296.”
§ References
“35. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1298.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3.2. Thermal Properties
“However, when bacterial cellulose nanocrystals were modified with silane groups, Tm values were founded to increase with increasing filler content. According to the authors, this difference was due to stronger interactions between silylated whiskers and PVA matrix.”
§ 3.2. Thermal Properties
“Grunert et al. [43] in their work with cellulose acetate butyrate (CAB) reinforced with bacterial cellulose nanocrystals.”
Citations
Cites
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980 · cited 1×
“[61] gives a clear overview of such cellulosic nanomaterials.”
BackgroundComposites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 5×
“The term ―natural fibers‖ is used to designate numerous kinds of fibers that are naturally produced by plants, animals and minerals [5].”
BackgroundInfluentialNishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676 · cited 1×
“Indeed lignocellulosic materials start to degrade near 220 °C restricting the type of matrix that can be used in association with natural fillers [22,101].”
BackgroundCellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493 · cited 2×
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
MethodJOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · cited 1×
“their ability to form hydrogen bonds play a major role in directing the crystalline packing and also governing the physical properties of cellulose [16].”
BackgroundAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Self-citationPääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796 · cited 1×
“[85,86] have proposed a new process to obtain MFC based on TEMPO reaction and strong mixing.”
MethodNatural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Research works printed but not linked: 9
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Nalwa, H.S. Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publisher. [2nd ed.]. in press.
- Brännvall, E. (2007). Aspect on Strength Delivery and Higher Utilisation of Strength Potential of Soft Wood Kraft Pupl Fibres. [Ph.D. Thesis, KTH, Royal Institute of Technology].
- Kroschwitz, 2003, Cellulose, Encyclopedia of Polymler Science and Technology, Volume 5, 473
- Lu, 2008, Surface modification of microfibrillated cellulose for epoxy composite applications, Polymer, 49, 1285, 10.1016/j.polymer.2008.01.028 · DOI · Paper page
- Herrick, 1983, Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci. Appl. Polym. Symp., 37, 797
- Khademhosseini, 2006, Nanobiotechnology—Drug delivery and tissue engineering, Chem. Engin. Progress, 102, 38
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
Cited by
Items 401–500 of 1,323
The Influence of Bleached Jute Fiber Filler on the Properties of Vulcanized Natural Rubber
Correia, C. A., de Oliveira, L. M., & Valera, T. S. (2017) · Materials Research · doi:10.1590/1980-5373-mr-2017-0126 · Cited by 54
Highly reversible photochromism in composite WO3/nanocellulose films
Evdokimova, O. L., Kusova, T. V., Иванова, О. С., Shcherbakov, A. B., Yorov, K. E., Baranchikov, A. E., Агафонов, А. В., & Ivanov, V. K. (2019) · Cellulose · doi:10.1007/s10570-019-02716-2 · Cited by 50
Thermo-responsive nanofibrillated cellulose by polyelectrolyte adsorption
Larsson, E., Sánchez, C. C., Porsch, C., et al. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.05.023 · Cited by 51
Lindström, T., Aulin, C., Naderi, A., & Ankerfors, M. (2014) · Wiley eBooks · doi:10.1002/0471440264.pst614 · Cited by 64
Socially‐Directed Development of Materials for Structural Color
Datta, B., Spero, E. F., Martín‐Martínez, F. J., & Christine Ortiz, B. (2022) · Advanced Materials · doi:10.1002/adma.202100939 · Cited by 53
Kumar, N., Kandasami, R. K., & Singh, S. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.128606 · Cited by 56
Reinforced plastics and aerogels by nanocrystalline cellulose
Leung, A. C. W., Lam, E., Chong, J. H., Hrapovic, S., & Luong, J. H. T. (2013) · Journal of Nanoparticle Research · doi:10.1007/s11051-013-1636-z · Cited by 62
“Since then, NCC has been incorporated into various polymers (Eichhorn et al. 2010; Klemm et al. 2011; Siqueira et al. 2010).”
Tritt‐Goc, J., Jankowska, I., Pogorzelec-Glaser, K., Pankiewicz, R., & Ławniczak, P. (2017) · Cellulose · doi:10.1007/s10570-017-1555-8 · Cited by 50
Kriechbaum, K., Munier, P., Apostolopoulou‐Kalkavoura, V., & Lavoine, N. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b02278 · Cited by 54
Preparation and Applications of the Cellulose Nanocrystal
Yang, Y., Chen, Z., Zhang, J., Wang, G., Zhang, R., & Suo, D. (2019) · International Journal of Polymer Science · doi:10.1155/2019/1767028 · Cited by 51
Baghbadorani, N. B., Behzad, T., Darvanjooghi, M. H. K., & Etesami, N. (2020) · Cellulose · doi:10.1007/s10570-020-03511-0 · Cited by 51
Industrial Point of View of Nanocellulose Materials and Their Possible Applications
Chauve, G., & Bras, J. (2014) · Materials and Energy/Materials and energy · doi:10.1142/9789814566469_0014 · Cited by 67
Self-citationShahrousvand, E., Shahrousvand, M., Ghollasi, M., Seyedjafari, E., Jouibari, I. S., Babaei, A., & Salimi, A. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.05.027 · Cited by 53
The use of biobased nanofibres in composites
Bandyopadhyay‐Ghosh, S., Ghosh, S. B., & Sain, M. M. (2014) · Elsevier eBooks · doi:10.1533/9781782421276.5.571 · Cited by 76
Paladini, G., Venuti, V., Crupi, V., Majolino, D., Fiorati, A., & Punta, C. (2021) · Polymers · doi:10.3390/polym13040528 · Cited by 50
Pal, N., Banerjee, S., Roy, P., & Pal, K. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.08.237 · Cited by 48
Emami, Z., Meng, Q., Pircheraghi, G., & Manas‐Zloczower, I. (2015) · Cellulose · doi:10.1007/s10570-015-0728-6 · Cited by 49
“Nanoscaled crystalline cellulosic short fibers called cellulose nanowhiskers (CNWs) are an interesting material for developing bio-based nanocomposites because of the abundance and renewability of cellulosic resources (Siqueira et al. 2010; Cao et al. 2012; Xu et al. 2013).”
BackgroundInterfacial mechanics of cellulose nanocrystals
Sinko, R., Qin, X., & Keten, S. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.67 · Cited by 52
Extraction and Characterization of Cellulose Nanocrystals Produced by Acid Hydrolysis from Corn Husk
Kampeerapappun, P. (2015) · Journal of Metals Materials and Minerals · doi:10.14456/jmmm.2015.3 · Cited by 66
Chitosan-based nanocomposite matrices: Development and characterization
Marín-Silva, D. A., Rivero, S., & Pinotti, A. N. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.035 · Cited by 48
Active biopackaging produced from by‐products and waste from food and marine industries
Debeaufort, F. (2021) · FEBS Open Bio · doi:10.1002/2211-5463.13121 · Cited by 55
Effect of cellulose nanocrystals (CNC) on isothermal crystallization kinetics of polypropylene
Khoshkava, V., Ghasemi, H., & Kamal, M. R. (2015) · Thermochimica Acta · doi:10.1016/j.tca.2015.04.007 · Cited by 49
Nanocellulose-Based Polymeric Blends for Food Packaging Applications
Arrieta, M. P., Fortunati, E., Burgos, N., Peltzer, M. A., López, J., & Peponi, L. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-44248-0.00007-9 · Cited by 69
Thermal properties and crystallinity of PCL/PBSA/cellulose nanocrystals grafted with PCL chains
Simão, J. A., Bellani, C. F., & Branciforti, M. C. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44493 · Cited by 49
Dhaliwal, J. S. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.86884 · Cited by 63
Impact of microfluidization on the microstructure and functional properties of pea hull fibre
Morales‐Medina, R., Dong, D., Schalow, S., & Drusch, S. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.105660 · Cited by 49
Preparation and application of edible agar-based composite films modified by cellulose nanocrystals
Zhao, J., Liu, T., Xia, K., et al. (2022) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2022.100936 · Cited by 46
Materials, Weaving Parameters, and Tensile Responses of Woven Textiles
Patti, A., & Acierno, D. (2023) · Macromol—A Journal of Macromolecular Research · doi:10.3390/macromol3030037 · Cited by 54
“Chemical structures of some fiber components: cellulose [51]; keratin [52]; lignin [ fibroin [54”
BackgroundIslam, T., Hossain, M. M., & Covington, S. (2025) · Journal of Natural Fibers · doi:10.1080/15440478.2025.2462218 · Cited by 57
“Natural fibers have highly complex cell structures and chemical compositions (Siqueira, Bras, and Dufresne 2010).”
Karimi, S., Tahir, P. M., Dufresne, A., Karimi, A. N., & Abdulkhani, A. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p041-045 · Cited by 46
“…deconstructing cellulosic fibers into their elementary building blocks known as cellulose nanofibers (CNFs) or microfibrillated cellulose (MFC), cellulose nanocrystals (CNCs) or whiskers, while one of the promising application is in the composite industry (Hubbe et al. 2008; Siqueira et al. 2010).”
BackgroundSelf-citationNanocellulose-Based Conductive Membranes for Free-Standing Supercapacitors: A Review
Hsu, H. H., & Zhong, W. (2019) · Membranes · doi:10.3390/membranes9060074 · Cited by 51
“Hemicellulose is a different component from cellulose in that it has various units of sugars, a higher degree of branching, and a lower degree of polymerization than cellulose [20,21].”
BackgroundInfluentialPoly(butylene adipate-co-terephthalate) Polyester Synthesis Process and Product Development
Mahata, D., Karthikeyan, S., Godse, R. R., & Gupta, V. K. (2021) · Polymer Science Series C · doi:10.1134/s1811238221010045 · Cited by 54
Clues for Biomimetics From Natural Composite Materials
Lapidot, S., Meirovitch, S., Sharon, S., Heyman, A., Kaplan, D. L., & Shoseyov, O. (2012) · Nanomedicine · doi:10.2217/nnm.12.107 · Cited by 51
“[8]; therefore, in the current review we only highlight some of our own recent experiences with cellulose nanocomposites.”
BackgroundBio-Based Nanocomposites in Food Packaging
Fortunati, E., Luzi, F., Yang, W., Kenny, J. M., Torre, L., & Puglia, D. (2018) · Elsevier eBooks · doi:10.1016/b978-0-323-51271-8.00004-8 · Cited by 67
Adsorption Behavior of Chromium(VI) onto Regenerated Cellulose Membrane
Awang, N., Salleh, W. N. W., Ismail, A. F., Yusof, N. B., Aziz, F., & Jaafar, J. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b02366 · Cited by 47
Ferreira, F. V., Mariano, M., Pinheiro, I. F., Cazalini, E. M., Souza, D. H. S., Lepesqueur, L. S. S., Koga‐Ito, C. Y., Gouveia, R. F., & Lona, L. M. F. (2019) · Polymer Engineering and Science · doi:10.1002/pen.25066 · Cited by 48
Macroporous hybrid Pickering foams based on carbon nanotubes and cellulose nanocrystals
Mougel, J.-B., Bertoncini, P., Cathala, B., et al. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.01.127 · Cited by 45
Susi, S., Ainuri, M., Wagiman, W., & Falah, M. A. F. (2023) · International Journal of Biomaterials · doi:10.1155/2023/9169431 · Cited by 44
Assessing nanocellulose developments using science and technology indicators
Milanez, D. H., do Amaral, R. M., de Faria, L. I. L., et al. (2013) · Materials Research · doi:10.1590/s1516-14392013005000033 · Cited by 44
Acid-free extraction of cellulose type I nanocrystals using Brønsted acid-type ionic liquids
Lazko, J., Sénéchal, T., Bouchut, A., Paint, Y., Dangreau, L., Fradet, A., Tessier, M., Raquez, J., & Dúbois, P. (2016) · Nanocomposites · doi:10.1080/20550324.2016.1199410 · Cited by 45
Alkenylation of cellulose nanocrystals (CNC) and their applications
Miao, C., & Hamad, W. Y. (2016) · Polymer · doi:10.1016/j.polymer.2016.08.099 · Cited by 46
The nanocellulose biorefinery: woody versus herbaceous agricultural wastes for NCC production
García, A., Labidi, J., Belgacem, M. N., & Bras, J. (2016) · Cellulose · doi:10.1007/s10570-016-1144-2 · Cited by 47
Self-citationPreparation and properties of microcrystalline cellulose/hydroxypropyl starch composite films
Chen, J., Long, Z., Wang, J., Wu, M., Wang, F., Wang, B., & Lv, W. (2017) · Cellulose · doi:10.1007/s10570-017-1423-6 · Cited by 44
“Microcrystalline cellulose, the product of natural cellulose hydrolyzed by acid (Brannan et al. 2014; Siqueira et al. 2010), was characterized by low cost, low density, high specific surface area, high strength, high elastic modulus, high thermal stability, biodegradability, and recyclability (Andresen et al.”
BackgroundDai, J., Chae, M. S., Beyene, D., Danumah, C., Tosto, F., & Bressler, D. C. (2018) · Materials · doi:10.3390/ma11091645 · Cited by 46
“However, the use of enzyme treatment in combination with mechanical processing for CNCs production has been widely studied [10,22,23].”
BackgroundNguyen, T. T. Q., Loganathan, P., Nguyễn, T. V., Vigneswaran, S., & Ngo, H. H. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.127370 · Cited by 45
Luminescent nanohybrid of ZnO quantum dot and cellulose nanocrystal as anti-counterfeiting ink
Ngoensawat, U., Parnsubsakul, A., Kaitphaiboonwet, S., et al. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117864 · Cited by 44
Khairnar, Y. N., Hansora, D., Hazra, C., Kundu, D., Tayde, S., Tonde, S., Naik, J., & Chatterjee, A. (2021) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2021.100065 · Cited by 51
Hassan, M. L., Bras, J., Hassan, E. A., Fadel, S. M., & Dufresne, A. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36373 · Cited by 43
Darmenbayeva, A. S., Rajasekharan, R., Massalimova, B. K., Бектенов, Н. А., Taubayeva, R., Bazarbaeva, K. Z., Курманалиевич, К. М., Mukazhanova, Z., Nurlybayeva, А. N., Bulekbayeva, K., et al. (2024) · Molecules · doi:10.3390/molecules29245969 · Cited by 60
“At this stage, additional material treatment may also be carried out to improve its physicochemical properties, such as increasing porosity or strength [45].”
Fahma, F., Hori, N., Iwata, T., & Takemura, A. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38312 · Cited by 45
Dagnon, K. L., Way, A. E., Carson, S. O., Silva, J., Maia, J. M., & Rowan, S. J. (2013) · Macromolecules · doi:10.1021/ma4008187 · Cited by 47
Microcrystalline cellulose as reinforcing agent in silicone elastomers
Deng, S., Binauld, S., Mangiante, G., Frances, J.-M., Charlot, A., Bernard, J., Zhou, X. D., & Fleury, É. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.06.035 · Cited by 45
Gicquel, E., Martin, C., Heux, L., Jean, B., & Bras, J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.01.022 · Cited by 46
Self-citationZhan, Y., Xiong, C., Yang, J., et al. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.01.029 · Cited by 43
Gicquel, E., Martin, C., Gauthier, Q., Engström, J., Abbattista, C., Carlmark, A., Cranston, E. D., Jean, B., & Bras, J. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00327 · Cited by 45
Self-citationKamelnia, E., Divsalar, A., Darroudi, M., Yaghmaei, P., & Sadri, K. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111538 · Cited by 43
Paşaoğlu, M. E., & Koyuncu, İ. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.128710 · Cited by 42
Cellulose grafting by photoinduced controlled radical polymerisation
Larsson, E., Pendergraph, S. A., Kaldéus, T., Malmström, E., & Carlmark, A. (2014) · Polymer Chemistry · doi:10.1039/c4py01618a · Cited by 42
Bionanocomposites based on thermoplastic starch and cellulose nanofibers
Orue, A., Corcuera, M. Á., Peña-Rodríguez, C., Eceiza, A., & Arbelaiz, A. (2014) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705714536424 · Cited by 42
Wang, L., Roach, A. W., Gardner, D. J., & Han, Y. (2017) · Cellulose · doi:10.1007/s10570-017-1556-7 · Cited by 42
Tan, L., Mandley, S., Peijnenburg, W. J. G. M., Waaijers, S. L., Giesen, D., Legradi, J., & Shen, L. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.243 · Cited by 46
Cellulose-mineral interactions based on the DLVO theory and their correlation with flotability
Hartmann, R., Kinnunen, P., & Illikainen, M. (2018) · Minerals Engineering · doi:10.1016/j.mineng.2018.03.023 · Cited by 42
Overview of Nanocellulose in Food Packaging
de Souza, E. F., Gottschalk, L. M. F., & Freitas‐Silva, O. (2019) · Recent Patents on Food Nutrition & Agriculture · doi:10.2174/2212798410666190715153715 · Cited by 46
Góis, G. D. S., Nepomuceno, N. C., França, C. H. A., de Almeida, Y. M. B., Hernández, E. P., de Oliveira, J. E., de Oliveira, M. P., Medeiros, E. S. D., & Santos, A. S. F. (2018) · Polymer Composites · doi:10.1002/pc.24704 · Cited by 43
A review of bio-based nanocellulose epoxy composites
Ilyas, R. A., Asyraf, M. R. M., Rajeshkumar, L., Awais, H., Siddique, A., Shaker, K., Nawab, Y., & Wahit, M. U. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.113835 · Cited by 45
Corre, D. L., Bras, J., & Dufresne, A. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100317 · Cited by 47
Self-citationMicrofibrillated cellulose (MFC): pullulan bionanocomposite films
Cozzolino, C. A., Cerri, G., Brundu, A., & Farris, S. (2014) · Cellulose · doi:10.1007/s10570-014-0433-x · Cited by 50
Tailoring Cellulose Surfaces by Controlled Polymerization Methods
Carlmark, A. (2013) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201300272 · Cited by 41
Shi, Z., Xu, H., Yang, Q., Xiong, C., Zhao, M., Kobayashi, K., Saito, T., & Isogai, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115215 · Cited by 41
Saeed, A. A., Abbas, M. N., Singh, B., ABOUZEID, R. E., & Kamel, S. M. (2019) · Analytical Methods · doi:10.1039/c9ay02176k · Cited by 44
Specimen preparation optimization for size and morphology characterization of nanocellulose by TEM
da Silva, L. C. E., Cassago, A., Battirola, L. C., et al. (2020) · Cellulose · doi:10.1007/s10570-020-03116-7 · Cited by 41
Novel technologies for producing tridimensional cellulosic materials for packaging: A review
Fréville, E., Pescheux-Sergienko, J., Mujica, R., Rey, C., & Bras, J. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122413 · Cited by 46
Self-citationThe effect of Fenton chemistry on the properties of microfibrillated cellulose
Hellström, P., Heijnesson-Hultén, A., Paulsson, M., Håkansson, H., & Germgård, U. (2014) · Cellulose · doi:10.1007/s10570-014-0243-1 · Cited by 45
“Various mechanical treatment methods have been used to manufacture MFC, for example the Gaulin homogenizer (Turbak et al. 1983) in which the pulp suspension is forced through a small-diameter orifice at 53 MPa.”
BackgroundMethodSynthesis and characterization of iron oxide/cellulose nanocomposite film
Yadav, M., Mun, S., Hyun, J., & Kim, J. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.11.042 · Cited by 40
Sustained Dye Release Using Poly(urea–urethane)/Cellulose Nanocrystal Composite Microcapsules
Yoo, Y., Martinez, C. J., & Youngblood, J. P. (2017) · Langmuir · doi:10.1021/acs.langmuir.6b04628 · Cited by 40
Reusable and cross‐linked cellulose nanofibrils aerogel for the removal of heavy metal ions
Tian, C., She, J., Wu, Y., et al. (2017) · Polymer Composites · doi:10.1002/pc.24536 · Cited by 40
All-Aqueous SI-ARGET ATRP from Cellulose Nanofibrils Using Hydrophilic and Hydrophobic Monomers
Kaldéus, T., Leggieri, M. R. T., Sánchez, C. C., & Malmström, E. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00153 · Cited by 42
Biorefining of perennial ryegrass for the production of nanofibrillated cellulose
Sharma, H. S. S., Carmichael, E., Muhamad, M., McCall, D., Andrews, F., Lyons, G. A., McRoberts, W. C., & Hornsby, P. R. (2012) · RSC Advances · doi:10.1039/c2ra20716h · Cited by 43
Influence of high loading of cellulose nanocrystals in polyacrylonitrile composite films
Luo, J., Chang, H., Davijani, A. A. B., Liu, H. C., Wang, P., Moon, R. J., & Kumar, S. (2017) · Cellulose · doi:10.1007/s10570-017-1219-8 · Cited by 42
“be an effective reinforcement in polymer composites (Habibi et al. 2010; Lin and Dufresne 2014; Siqueira et al. 2010).”
BackgroundMethodInfluentialTransformer Insulation Materials and Ageing
Saha, T. K., & Purkait, P. (2017) · doi:10.1002/9781119239970.ch1 · Cited by 40
Occurrence, distribution, and structure of natural polysaccharides
Kabir, S. F., Rahman, A., Yeasmin, F., Sultana, S., Masud, R. A., Kanak, N. A., & Haque, P. (2021) · Elsevier eBooks · doi:10.1016/b978-0-323-85672-0.00005-2 · Cited by 86
Hu, Y., Yang, Z. Y., Xu, M., Niu, F., Chen, Y., Yang, Q., Xiong, C., & Shi, Z. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109725 · Cited by 39
Biopolymer-based composites for sustainable energy storage: recent developments and future outlook
Patra, N., Ramesh, P., Donthu, V., et al. (2024) · Journal of Materials Science Materials in Engineering · doi:10.1186/s40712-024-00181-9 · Cited by 39
“There are a wide variety of applications, including medical equipment, food, packaging, and textiles (Sanivada et al. 2020; Siqueira et al. 2010).”
BackgroundA green Pickering emulsion stabilized by cellulose nanocrystals via RAFT polymerization
Liu, B., Yang, D., Man, H., Liu, Y., Chen, H., Xu, H., Wang, W., & Bai, L. (2017) · Cellulose · doi:10.1007/s10570-017-1559-4 · Cited by 37
“The application of CNCs has been of interest involving nanocomposite (Kargarzadeh et al. 2015; Dufresne 2013; Siqueira et al. 2010), biomedical materials (Lin and Dufresne 2014a, b; Lin et al. 2016), gelation agents (Yang et al. 2015), and pharmaceutics due to its favorable material properties (Lin…”
MethodZhu, Z., Fu, S., & Lucia, L. A. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b06399 · Cited by 43
Jha, P. (2020) · Journal of Food Science and Technology · doi:10.1007/s13197-020-04908-2 · Cited by 41
The digital printing of chromatic pattern with a single cellulose nanocrystal ink
Cheng, Q., Guo, J., Cao, X., et al. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.135670 · Cited by 39
Recent Progress on Tailoring the Biomass-Derived Cellulose Hybrid Composite Photocatalysts
Chai, Y. D., Pang, Y. L., Lim, S., Chong, W. C., Lai, C. W., & Abdullah, A. Z. (2022) · Polymers · doi:10.3390/polym14235244 · Cited by 44
“The Iα crystal structures predominate in bacterial cellulose and algae cellulose, whereas the Iβ crystal structures predominate in plant cellulose and tunicate cellulose [58].”
BackgroundEl‐Wakil, N. A., Kassem, N. F., & Hassan, M. L. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.026 · Cited by 39
Application of nanocrystalline cellulose
Bhat, A. H., Dasan, Y. K., Khan, I., Soleimani, H., & Usmani, A. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00009-7 · Cited by 52
Abdallah, W., & Kamal, M. R. (2018) · Cellulose · doi:10.1007/s10570-018-1975-0 · Cited by 44
Jarai, B. M., Kolewe, E. L., Stillman, Z. S., Raman, N., & Fromen, C. A. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816662-8.00018-7 · Cited by 50
Feldman, D. (2015) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2015.1007279 · Cited by 38
Cellulose Nanocrystals: A Potential Nanofiller for Food Packaging Applications
Dhar, P., Bhardwaj, U., Kumar, A., & Katiyar, V. (2014) · ACS symposium series · doi:10.1021/bk-2014-1162.ch017 · Cited by 46
Nanocellulose‐Based Polymer Nanocomposite: Isolation, Characterization and Applications
Khalil, H. P. S. A., Davoudpour, Y., Aprilia, N. A. S., Mustapha, A., Hossain, S., Islam, N., & Dungani, R. (2014) · Wiley eBooks · doi:10.1002/9781118872246.ch11 · Cited by 45
“Indeed lignocellulosic materials start to degrade near 220 °C and this character restricts the type of matrix which can be used with natural fillers (Siqueira et al., 2010).”
BackgroundInfluentialOsolnik, U., Vek, V., Korošec, R. C., Oven, P., & Poljanšek, I. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.128495 · Cited by 47
Different strategies for obtaining high opacity films of MFC with TiO2 pigments
Bardet, R., Belgacem, M. N., & Bras, J. (2013) · Cellulose · doi:10.1007/s10570-013-0025-1 · Cited by 44
Self-citationWagner, R., Moon, R. J., & Raman, A. (2016) · Cellulose · doi:10.1007/s10570-016-0883-4 · Cited by 41
“CNs have shown utility in a wide array of applications, suggesting the potential for commercialization across an array of industrial sectors (Hansen et al. 2014; Moon et al. 2011; Siqueira et al. 2010; Samir et al. 2005; Eichhorn 2011; Mariano et al. 2014).”
BackgroundKuo, P., Barros, L. D. A., Yan, N., Sain, M. M., Qing, Y., & Wu, Y. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.08.091 · Cited by 39
“Based on the percolation theory, the percolation threshold of NCFs connectivity is less than 6 vol%,([40]) but NCFs between 6 vol% to 18 vol% would not form a dense sheet network.”
BackgroundCellulose nanocrystals reduce cold damage to reproductive buds in fruit crops
Alhamid, J. O., Mo, C., Zhang, X., Wang, P., Whiting, M. D., & Zhang, Q. (2018) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2018.06.006 · Cited by 38
Metadata
- Authors
- Siqueira, G., Bras, J., & Dufresne, A.
- Affiliations
- Institut polytechnique de Grenoble (FR)
- Corresponding author
- Dufresne, Alain
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2010-12-13
- Volume
- 2
- Issue
- 4
- Pages
- 728-765
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1980921765
- Semantic Scholar
- 88e39e80ebe121f79b7f4d6157891419553dc112
- Cited by
- 1,328
- References
- 151
- Citations by year
- 2026: 44 · 2025: 59 · 2024: 69 · 2023: 89 · 2022: 91 · 2021: 111 · 2020: 83 · 2019: 111 · 2018: 101 · 2017: 118 · 2016: 102 · 2015: 113 · 2014: 117 · 2013: 59 · 2012: 41
- FWCI
- 15.68
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cellulose nanocrystals, microfibrillated cellulose, cellulose nanoparticles, biocomposites, mechanical properties, barrier properties, packaging materials, emulsion processing, natural fibers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.