Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Open accessThe DOI matches its Crossref record; 147 of the 151 references it cites were found in a registry or an index; 5 of the 201 sources its claims cite were checked for support.
Abstract
Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC)—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have shown that cellulose nanoparticles could be used as fillers to improve mechanical and barrier properties of biocomposites. Their use for industrial packaging is being investigated, with continuous studies to find innovative solutions for efficient and sustainable systems. Processing is more and more important and different systems are detailed in this paper depending on the polymer solubility, i.e., (i) hydrosoluble systems, (ii) non-hydrosoluble systems, and (iii) emulsion systems. This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.
Overview
CoChat Summary
TL;DR
This review summarizes preparation, properties, and applications of cellulosic bionanocomposites reinforced with cellulose nanocrystals/whiskers and microfibrillated cellulose (MFC). It reports that these nanofillers can strongly improve mechanical and barrier properties, often via a percolating hydrogen-bonded network, while processing and industrial scale-up remain challenging.
Key findings
- Cellulose nanoparticles act as effective reinforcing fillers; the strong effect is generally attributed to formation of a percolating network above the percolation threshold from hydrogen bonding between nanoparticles.
- Mechanical examples include poly(S-co-BuA) latex with 30 wt% wheat straw cellulose whiskers showing a rubbery Young’s modulus more than 1000-times higher than the bulk matrix; 10 wt% cellulose palm tree whiskers in natural rubber decreased strain at break from 575% to 16%; 5 wt% MFC improved PU modulus by approximately 200% at 5 °C and close to 500% at 85 °C; and PLA-MFC modulus increased from 5 GPa at 10 wt% MFC to almost 9 GPa at 70 wt% MFC.
- Barrier properties can improve: pure MFC films had oxygen transmission rate values of 17.0 and 17.8 mL m⁻² day⁻¹; MFC coating on PLA decreased OTR from 746 to 1 mL m⁻² day⁻¹ Pa⁻¹; and 10 wt% sulfonated whiskers in xylan/sorbitol films decreased WVTR from 304 to 174 g h⁻¹ m⁻².
- Thermal behavior varies: several studies found no important Tg changes with cellulose nanofillers, while moisture, plasticization, and filler content can alter Tg and crystallinity depending on the system.
Methods
- Narrative review of cellulose nanoparticles (whiskers/nanocrystals and MFC), their preparation, characterization, properties, and applications, citing more than 150 references.
- Describes processing routes classified by polymer solubility: hydrosoluble systems, emulsion systems, and non-hydrosoluble systems, plus solvent casting, extrusion, surfactant coating, and surface chemical modification/grafting.
- No new experimental data are generated; the paper synthesizes selected published works and cites SciFinder literature trends, e.g., papers on “cellulose and nano” increased from 57 in 2000 to more than 700 in 2009.
Limitations
- The paper states that toxicity is not discussed because of “a lot of uncertainty,” that practical transition from laboratory to industrial scale is not simple and requires chemical engineering to reduce nanoparticle production costs, and that inconsistent terminology for cellulose nanoparticles causes misunderstanding and ambiguity.
- Evident from the text: as a narrative review, it summarizes “some selected works” rather than using a described systematic search or inclusion criteria, and it does not perform quantitative meta-analysis.
- Evident from the text: many property claims are drawn from cited studies rather than independently verified here, and the review notes limited reported use of cellulose nanocrystals for barrier properties and possible porosity in nanocomposite films reducing MFC efficiency.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
5 Valid · 6 Not valid · 149 Not checked · 42 Own results and interpretations
In the paper
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers. This result was surprising due to the high specific area of such nanofillers, e.g., around 170 m 2 g -1 for tunicin whiskers [139].”
- Also stated in: § 3.2. Thermal Properties · plain
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers.”
What the sources say
- Not checked — no full text of the sourcecites [139] Angles, 2000, Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3.2. Thermal Properties · plain
In the paper
“However, it seems that, at least under the conditions presented in this work, the cellulose chemical modification via grafting-from technique changes partially the cellulose crystallinity.”
What the sources say
- Not checked — no full text of the sourcecites [44] Morandi, 2009, Cellulose nanocrystals grafted with polystyrene chains through surface-initiated atom transfer radical polymerization (SI-ATRP), Langmuir source
hedgedstates a possible causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Indeed, classical predicting models for short-fiber composites cannot be applied.”
What the sources say
- Not checked — no full text of the sourcecites [71] Favier, 1995, Polymer nanocomposites reinforced by cellulose whiskers, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
What the sources say
- Not checked — no full text of the sourcecites [136] Seydibeyoglu, 2008, Novel nanocomposites based on polyurethane and micro fibrillated cellulose, Compos. Sci. Technol. source
- Not checked — no full text of the sourcecites [137] Wu, 2007, A high strength nanocomposite based on microcrystalline cellulose and polyurethane, Biomacromolecules source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“High efficiency was reached by this method that allowed esterification of cellulose nanoparticles to different extents with fatty acid chlorides.”
What the sources say
- Not checked — no full text of the sourcecites [129] Berlioz, 2009, Gas-phase surface esterification of cellulose microfibrils and whiskers, Biomacromolecules source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
108 more claims
Create a free account to see all 202 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 61
- It may state two separate claims as one. 45
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
“This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.”
§ References
“150. Saxena, A.; Ragauskas, A.J. Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan. Carbohyd. Polym. 2009 , 78 , 357-360.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ References
“23. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1296.”
§ References
“35. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1298.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3.2. Thermal Properties
“However, when bacterial cellulose nanocrystals were modified with silane groups, Tm values were founded to increase with increasing filler content. According to the authors, this difference was due to stronger interactions between silylated whiskers and PVA matrix.”
§ 3.2. Thermal Properties
“Grunert et al. [43] in their work with cellulose acetate butyrate (CAB) reinforced with bacterial cellulose nanocrystals.”
Citations
Cites
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980 · cited 1×
“[61] gives a clear overview of such cellulosic nanomaterials.”
BackgroundComposites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 5×
“The term ―natural fibers‖ is used to designate numerous kinds of fibers that are naturally produced by plants, animals and minerals [5].”
BackgroundInfluentialNishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676 · cited 1×
“Indeed lignocellulosic materials start to degrade near 220 °C restricting the type of matrix that can be used in association with natural fillers [22,101].”
BackgroundCellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493 · cited 2×
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
MethodJOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · cited 1×
“their ability to form hydrogen bonds play a major role in directing the crystalline packing and also governing the physical properties of cellulose [16].”
BackgroundAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Self-citationPääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796 · cited 1×
“[85,86] have proposed a new process to obtain MFC based on TEMPO reaction and strong mixing.”
MethodNatural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Research works printed but not linked: 9
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Nalwa, H.S. Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publisher. [2nd ed.]. in press.
- Brännvall, E. (2007). Aspect on Strength Delivery and Higher Utilisation of Strength Potential of Soft Wood Kraft Pupl Fibres. [Ph.D. Thesis, KTH, Royal Institute of Technology].
- Kroschwitz, 2003, Cellulose, Encyclopedia of Polymler Science and Technology, Volume 5, 473
- Lu, 2008, Surface modification of microfibrillated cellulose for epoxy composite applications, Polymer, 49, 1285, 10.1016/j.polymer.2008.01.028 · DOI · Paper page
- Herrick, 1983, Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci. Appl. Polym. Symp., 37, 797
- Khademhosseini, 2006, Nanobiotechnology—Drug delivery and tissue engineering, Chem. Engin. Progress, 102, 38
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
Cited by
Items 601–700 of 1,323
Nanocelluloses and Their Applications in Conservation and Restoration of Historical Documents
Marques, A. P. S., Almeida, R. O., Pereira, L. F. R., Carvalho, M. G. V. S., & Gamelas, J. A. F. (2024) · Polymers · doi:10.3390/polym16091227 · Cited by 26
“However, over time, the iron gall ink can darken and turn blacker due to However, over time, the iron gall ink can darken and turn blacker due to the oxidation of iron ions. the oxidation of iron ions.”
BackgroundPolyhydroxyalkanoates and Their Nanobiocomposites With Cellulose Nanocrystals
de Carvalho, K. C. C., Montoro, S. R., Cioffi, M. O. H., & Voorwald, H. J. C. (2015) · Elsevier eBooks · doi:10.1016/b978-0-323-39408-6.00012-1 · Cited by 35
Emerging Cellulose-Based Nanomaterials and Nanocomposites
Sheikhi, A. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-814615-6.00009-6 · Cited by 37
An overview of biopolymer nanostructures for encapsulation of food ingredients
Assadpour, E., & Jafari, S. M. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815663-6.00001-x · Cited by 55
Formation of hairy cellulose nanocrystals by cryogrinding
Mahrous, F., Koshani, R., Tavakolian, M., Conley, K. M., & van de Ven, T. G. M. (2021) · Cellulose · doi:10.1007/s10570-021-04092-2 · Cited by 25
“2015), flexible electronics, optical devices (Siqueira et al. 2010; Wei et al. 2014) biomedical products (Halib et al.”
BackgroundMicrocellulose Vs Nanocellulose – A Review
Ioelovich, M. (2022) · World Journal of Advanced Engineering Technology and Sciences · doi:10.30574/wjaets.2022.5.2.0037 · Cited by 32
“Various mechanical processing usually produces a heterogeneous mixture of CNFs of various diameters ranging from 10 to 100 nm, and lengths of several microns [41, 42].”
BackgroundExtraction, Applications and Characterization of Plant Fibers
Ntenga, R., SAÏDJO, S., Wakata, A. S., et al. (2022) · IntechOpen eBooks · doi:10.5772/intechopen.103093 · Cited by 25
Well-defined ABA- and BAB-type block copolymers of PDMAEMA and PCL
Bruce, C., Javakhishvili, I., Fogelström, L., Carlmark, A., Hvilsted, S., & Malmström, E. (2014) · RSC Advances · doi:10.1039/c4ra04325a · Cited by 26
Ng, T. S., Ching, Y. C., Awanis, N., Ishenny, N., & Rahman, M. R. (2014) · Materials Research Innovations · doi:10.1179/1432891714z.000000000986 · Cited by 25
Cellulosic Biocomposites: Potential Materials for Future
Bhat, A. H., Dasan, Y. K., Khan, I., & Jawaid, M. (2017) · Green energy and technology · doi:10.1007/978-3-319-49382-4_4 · Cited by 30
Ali, K. A. K., Wahba, M. I., ABOUZEID, R. E., et al. (2018) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-018-1936-z · Cited by 25
Raisipour-Shirazi, A., Ahmadi, Z., & Garmabi, H. (2018) · Iranian Polymer Journal · doi:10.1007/s13726-018-0651-4 · Cited by 27
Liu, M., Li, S., Fang, Y., Chen, Z., Alyas, M. F., Liu, J., Zeng, X., & Zhang, L. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c00971 · Cited by 26
Otoni, C. G., Carvalho, A. S., Cardoso, M. V. C., Bernardinelli, O. D., Lorevice, M. V., Colnago, L. A., Loh, W., & Mattoso, L. H. C. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01855 · Cited by 25
Extraction and Production of Cellulose Nanofibers
Vázquez, A., Foresti, M. L., Morán, J., & Cyras, V. P. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_57 · Cited by 37
Jin, H., Cao, A., Shi, E., Seitsonen, J. J. T., Zhang, L., Ras, R. H. A., Berglund, L. A., Ankerfors, M., Walther, A., & Ikkala, O. T. (2012) · Journal of Materials Chemistry B · doi:10.1039/c2tb00370h · Cited by 25
Rahman, M. M., & Netravali, A. N. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500095r · Cited by 24
Reid, M. S., Erlandsson, J., & Wågberg, L. (2019) · ACS Macro Letters · doi:10.1021/acsmacrolett.9b00692 · Cited by 24
de Oliveira, G. H. M., Maia, T. H. S., Talabi, S. I., et al. (2020) · Polymer Composites · doi:10.1002/pc.25907 · Cited by 24
Composition of plant biomass and its impact on pretreatment
Yang, C., & Lü, X. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-818862-0.00002-9 · Cited by 45
Wang, Y., Yang, J., Song, Y., Yang, Q., Xiong, C., & Shi, Z. (2022) · Diamond and Related Materials · doi:10.1016/j.diamond.2022.109626 · Cited by 25
Starch-based biofilm reinforced with empty fruit bunch cellulose nanofibre
Salehudin, M. H., Salleh, M. H. M., Muhamad, I. I., & Mamat, S. N. H. (2014) · Materials Research Innovations · doi:10.1179/1432891714z.000000000977 · Cited by 26
High strength modified nanofibrillated cellulose-polyvinyl alcohol films
Virtanen, S., Vuoti, S., Heikkinen, H. A., & Lahtinen, P. (2014) · Cellulose · doi:10.1007/s10570-014-0347-7 · Cited by 27
“These polymer nanocomposites contain low quantities of well-dispersed nano-sized fillers, which provides high mechanical performance (Siqueira et al. 2010).”
BackgroundMilanez, D. H., Noyons, E., & de Faria, L. I. L. (2016) · Scientometrics · doi:10.1007/s11192-016-1922-5 · Cited by 24
“…an initial set of publication on nanocellulose A search expression was developed considering several terms and synonyms found in nanocellulose literature and recommended by experts (Klemm et al., 2011; Milanez et al., 2013; Siqueira et al., 2010; Siró & Plackett, 2010), as can be seen from Table 1.”
BackgroundInfluentialYan, Y., Herzele, S., Mahendran, A. R., Edler, M., Grießer, T., Saake, B., Li, J., & Gindl‐Altmutter, W. (2016) · Polymers · doi:10.3390/polym8070255 · Cited by 25
PHBV/cellulose nanofibrils composites obtained by solution casting and electrospinning process
Benini, K. C. C. D. C., Cioffi, M. O. H., & Voorwald, H. J. C. (2017) · Matéria (Rio de Janeiro) · doi:10.1590/s1517-707620170002.0170 · Cited by 26
“In the literature, the most widespread process is the solvent evaporation samples obtained by solution casting, which allows obtaining thin films without the use of sophisticated equipment and with a simple and inexpensive process [19].”
BackgroundAhmadi, M., Behzad, T., Bagheri, R., & Heidarian, P. (2018) · Polymer International · doi:10.1002/pi.5592 · Cited by 23
Chiral Nematic Self-Assembly of Cellulose Nanocrystals in Suspensions and Solid Films
Abitbol, T., & Cranston, E. D. (2014) · Materials and Energy/Materials and energy · doi:10.1142/9789814566469_0035 · Cited by 32
Synthesis of biopolymer-based metal nanoparticles
Nasrollahzadeh, M., Shafiei, N., & Nezafat, Z. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-822108-2.00018-1 · Cited by 24
Lapka, T., Kopecký, D., Mazúr, P., et al. (2021) · Synthetic Metals · doi:10.1016/j.synthmet.2021.116806 · Cited by 23
Naghdi, R. (2021) · International Wood Products Journal · doi:10.1080/20426445.2021.1945180 · Cited by 27
Biodegradable trays based on Manihot esculenta Crantz starch and Zea mays husk flour
Aguirre, E., Domínguez, J., Villanueva, E., Ponce-Ramirez, J. A., Arévalo-Oliva, M. D. F., Siché, R., González-Cabeza, J., & Rodríguez, G. (2023) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2023.101129 · Cited by 24
Anisotropic, Strong, and Thermally Insulating 3D‐Printed Nanocellulose–PNIPAAM Aerogels
Nagel, Y., Sivaraman, D., Neels, A., Zimmermann, T., Zhao, S., Siqueira, G. D. F., & Nyström, G. (2023) · Small Structures · doi:10.1002/sstr.202300073 · Cited by 23
Self-citationWang, M., Liu, Q., Zeng, X., Chen, R., Wang, C., Li, M., Wu, X., Weng, W., & Zhang, Y. (2024) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2024.134154 · Cited by 25
Buskens, P., Mourad, M. C. D., Meulendijks, N. M. M., van Ee, R. J., Burghoorn, M. M. A., Verheijen, M. A., & van Veldhoven, E. (2015) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2015.09.041 · Cited by 24
Gutierrez, J., Carrasco‐Hernandez, S., Barud, H. D. S., Oliveira, R. L., de Carvalho, R. A., Amaral, A. C., & Tercjak, A. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.02.070 · Cited by 23
Naderi, A., Lindström, T., Sundström, J., & Flodberg, G. (2015) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2015-30-04-p568-577 · Cited by 24
“Concentrated nanofibrillated cellulose suspensions constitute fibrous flocs, which sinter together above a critical concentration ( 0.1% (w/w) (Pääkkö et al. 2007; Tanaka et al. 2014; Naderi et al. 2014a; Naderi et al. 2015) to form three-dimensional networks.”
BackgroundInfluentialElectrospinning of cellulose nanocrystals; procedure and optimization
Khodayari, A., Vats, S., Mertz, G., Schnell, C. N., Rojas, C. F., & Seveno, D. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122698 · Cited by 27
Rey, C., Hengl, N., Baup, S., Karrouch, M., Gicquel, E., Dufresne, A., Djéridi, H., Dattani, R., Jin, Y., & Pignon, F. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b01333 · Cited by 24
“An exponentially increasing number of works is devoted to understand and control the structural organization of these colloidal systems 1 and the way they are chemically treated and processed, in order to reach specific functional properties in many industrial applications.”
Self-citationHuang, M., Lee, S., Jo, I., Park, H., Shim, B. S., & Yoon, M. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121559 · Cited by 25
Gaurav, A., Ashamol, A., Deepthi, M. V., & Sailaja, R. R. N. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35591 · Cited by 23
Lignocellulose-Based Nanoparticles and Nanocomposites: Preparation, Properties, and Applications
Deepa, B., Chirayil, C. J., Pothan, L. A., & Thomas, S. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816354-2.00004-9 · Cited by 25
Wu, Q., Li, X., Li, Q., et al. (2019) · Polymers · doi:10.3390/polym11050781 · Cited by 22
Peterson, A., Östergren, I., Lotsari, A., Venkatesh, A., Thunberg, J., Ström, A., Rojas, R., Andersson, M., Berglund, L. A., Boldizar, A., et al. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00993 · Cited by 22
High-Modulus Oriented Cellulose Nanopaper
Gindl‐Altmutter, W., Veigel, S., Obersriebnig, M., Tippelreither, C., & Kečkéš, J. (2012) · ACS symposium series · doi:10.1021/bk-2012-1107.ch001 · Cited by 23
Bio‐based Nanomaterials and Their Bionanocomposites
Bagal-Kestwal, D., Kestwal, R. M., & Chiang, B. (2016) · Wiley eBooks · doi:10.1002/9783527683772.ch8 · Cited by 30
Sonocatalytic degradation of Congo Red using biomass-based cellulose/TiO2 composite
Chai, Y. D., Pang, Y. L., Lim, S., & Chong, W. C. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.09.246 · Cited by 21
Memiş, N. K., & Kaplan, S. (2020) · Journal of Industrial Textiles · doi:10.1177/1528083720975652 · Cited by 22
Qian, G., Dai, F., Chen, H., Wang, M., Hu, M., Chen, C., & Yu, Y. (2021) · Journal of Polymer Science · doi:10.1002/pol.20200879 · Cited by 21
Dunlop, M. J., Sabo, R. C., Bissessur, R., & Acharya, B. (2021) · Polymers · doi:10.3390/polym13213661 · Cited by 21
Photocured Nanocellulose Composites: Recent Advances
Poothanari, M. A., Schreier, A., Missoum, K., et al. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c07631 · Cited by 21
Self-citationYang, H., Yang, H., Wu, Y., et al. (2023) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2023.103449 · Cited by 21
Room-temperature embedment of anatase titania nanoparticles into porous cellulose aerogels
Jiao, Y., Wan, C., & Li, J. (2015) · Applied Physics A · doi:10.1007/s00339-015-9192-2 · Cited by 21
Shamsuri, A. A., Azid, M., Ariff, A. H. M., et al. (2014) · Polymers · doi:10.3390/polym6092345 · Cited by 21
Oriented polyvinyl alcohol films using short cellulose nanofibrils as a reinforcement
Peng, J., Ellingham, T., Sabo, R. C., Clemons, C. M., & Turng, L. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42283 · Cited by 22
Enzymatic hydrolysis and fermentation of ultradispersed wood particles after ultrasonic pretreatment
Ревин, В. В., Atykyan, N., & Zakharkin, D. (2016) · Electronic Journal of Biotechnology · doi:10.1016/j.ejbt.2015.11.007 · Cited by 21
Comparative Study of Microcelluloses Isolated From Two Different Biomasses with Commercial Cellulose
Owi, W. T., Lin, O. H., Sam, S. T., Chia, C. H., Zakaria, S., Mohaiyiddin, M. S., Villagracia, A. R., Santos, G. N. C., & Akil, H. M. (2016) · BioResources · doi:10.15376/biores.11.2.3453-3465 · Cited by 22
“It is the fibrous by-product obtained after sugarcane stalks are crushed for juice extraction (Faruk et al. 2012; Slavutsky and Bertuzzi 2014).”
BackgroundLu, A., Wang, Y., & Boluk, Y. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.01.077 · Cited by 21
Ibrahim, N. A., El‐Zairy, M. R., Eid, B. M., El-Zairy, E. M. R., & Emam, E. M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.11.040 · Cited by 21
“…materials, bionanocomposites, hydrogels, green 37 composites as well as functionalized textile materials (Holme, 2007; Chang & Zhang, 2011; 38 Siqueria et al., 2010; Thakur et al., 2014 a,b&c; Thakur et al., 2013; Zimniewska et al., 2011) 39 On the other hand, The increase in global…”
BackgroundTitania synthesized through regulated mineralization of cellulose and its photocatalytic activity
Postnova, I. V., Kozlova, E. A., Cherepanova, S. V., Tsybulya, S. V., Rempel, A. A., & Shchipunov, Y. A. (2014) · RSC Advances · doi:10.1039/c4ra15862h · Cited by 20
Hamdan, M. A., Najwa, M. A. K., Jose, R., Martin, D. J., & Adam, F. (2021) · Food Hydrocolloids for Health · doi:10.1016/j.fhfh.2021.100023 · Cited by 25
Lalji, S. M., Ali, S. I., & Asad, M. (2023) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-023-07737-5 · Cited by 20
Iswarya, S., Theivasanthi, T., & Gopinath, S. C. B. (2023) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2023.106189 · Cited by 23
Multiscale Modeling of Solvation
Kovalenko, A. (2016) · Springer eBooks · doi:10.1007/978-3-662-46657-5_5 · Cited by 24
Lam, N. T., Saewong, W., & Sukyai, P. (2017) · Journal of Polymer Research · doi:10.1007/s10965-017-1232-5 · Cited by 22
Nanocellulose-Polymer Composites: Novel Materials for Food Packaging Applications
Bharimalla, A. K., Patil, P. G., Mukherjee, S., Yadav, V., & Prasad, V. (2019) · Springer eBooks · doi:10.1007/978-3-030-19416-1_27 · Cited by 32
Çelebi, H., İlgar, M., & Seyhan, A. T. (2021) · Polymer Bulletin · doi:10.1007/s00289-021-03753-3 · Cited by 23
Transparent composite films prepared from chemically modified cellulose fibers
Sim, G., Liu, Y., & van de Ven, T. G. M. (2016) · Cellulose · doi:10.1007/s10570-016-0923-0 · Cited by 21
“Both NFC and NCC can be used in polymer composites as reinforcing agents as well (Hubbe et al. 2008; Koga et al. 2013; Siqueira et al. 2010).”
BackgroundYu, H., & Yan, C. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch12 · Cited by 32
Rigotti, D., Pegoretti, A., Miotello, A., et al. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.145066 · Cited by 19
Knöller, A., Widenmeyer, M., Bill, J., & Burghard, Ž. (2020) · Materials · doi:10.3390/ma13122838 · Cited by 19
“Typically extracted from plants, it cannot only find use as paper, but also as a mechanically stable matrix of numerous hybrid materials [1,2].”
BackgroundSoukupová, G., Bautkinová, T., Mazúr, P., et al. (2023) · Electrochimica Acta · doi:10.1016/j.electacta.2023.141830 · Cited by 19
Saud, A., Saleem, H., Khan, A. W., et al. (2023) · Membranes · doi:10.3390/membranes13050513 · Cited by 19
“This can provide mechanical integrity, and therefore can be utilized to reinforce membrane materials, polymers, and bio nanocomposites [49].”
BackgroundTimhadjelt, L., Sérier, A., Belgacem, M. N., & Bras, J. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.02.040 · Cited by 19
Self-citationCharacterization of nanoscale retrograded starch prepared by a sonochemical method
Ding, Y., & Kan, J. (2016) · Starch - Stärke · doi:10.1002/star.201500313 · Cited by 20
Hydrogels Nanocomposites Based on Crystals, Whiskers and Fibrils Derived from Biopolymers
Fajardo, A. R., Pereira, A. G. B., & Muniz, E. C. (2015) · Advanced structured materials · doi:10.1007/978-81-322-2473-0_2 · Cited by 27
“Among those strategies, the controlled chemical modification of the fillers surface has been performed, in order to increase the interfacial compatibility between the polymeric matrix and filler [104, 158].”
Bionanomaterial from agricultural waste and its application
Dungani, R., Khalil, H. P. S. A., Aprilia, N. A. S., Sumardi, I., Aditiawati, P., Darwis, A., Karliati, T., Sulaeman, A., Rosamah, E., & Riza, M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00003-6 · Cited by 26
Ahmadi, M., Behzad, T., & Bagheri, R. (2017) · Iranian Polymer Journal · doi:10.1007/s13726-017-0558-5 · Cited by 19
Preparation and properties of cellulose/Thespesia lampas microfiber composite films
Ashok, B., Obi Reddy, K., Feng, H., & Varada Rajulu, A. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.01.041 · Cited by 19
Nanocelluloses from phormium (Phormium tenax) fibers
Giorgio, L. D., Salgado, P. R., Dufresne, A., & Mauri, A. N. (2020) · Cellulose · doi:10.1007/s10570-020-03120-x · Cited by 22
Self-citationEngkagul, V., Rader, C., Pon, N., Rowan, S. J., & Weder, C. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.1c01056 · Cited by 19
da Silva, C. G., de Oliveira, F., & Frollini, E. (2018) · Waste and Biomass Valorization · doi:10.1007/s12649-018-0365-z · Cited by 19
Nair, R. R., Hyun, J. H., Kim, J., Jung, K. O., & Kim, D. (2024) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-024-01078-z · Cited by 20
Hasan, M. Z., Xu, C., Luo, L., Motaleb, K. Z. M. A., Ahmed, M. F., Tan, S., Bashar, M. M., Janutėnienė, J., Yue, C., Tu, H., et al. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.121224 · Cited by 19
Lavoine, N., Bras, J., Saito, T., & Isogai, A. (2017) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.28541 · Cited by 24
Self-citationNanocellulose-Based Adsorption for the Removal of Heavy Metal from Wastewater—A Review
Gobi, M., Kumar, A., Singh, J., Singh, S., & Ramamurthy, P. C. (2024) · Water Conservation Science and Engineering · doi:10.1007/s41101-024-00251-1 · Cited by 24
Khanjanzadeh, H., Pirayesh, H., & Sepahvand, S. (2014) · Journal of the Indian Academy of Wood Science · doi:10.1007/s13196-014-0111-5 · Cited by 18
“An increasing interest from the scientific community to work with materials in nanometric scale has been observed since the introduction of the concept of nanotechnology by Richard Feynman in 1959 at a meeting of the American Chemical Society (Siqueira et al. 2010).”
BackgroundSELF HEALING POTENTIAL OF GREEN NANOCOMPOSITES FROM CRYSTALLINE CELLULOSE
Pandey, J. K., & Takagi, H. (2011) · International Journal of Modern Physics B · doi:10.1142/s0217979211066611 · Cited by 18
Milanez, D. H., do Amaral, R. M., de Faria, L. I. L., et al. (2014) · Materials Research · doi:10.1590/1516-1439.266314 · Cited by 18
Ak, S., Shamsuri, A. A., Zainudin, E. S., et al. (2015) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705715614064 · Cited by 18
“The fillers pullout occurred due to the incompatibility of cellulose with most of synthetic polymer matrices.(35) Thus, this has prevented the cellulose from being wetted by the molten HDPE/LDPE, causing poor interfacial adhesion between them.”
BackgroundKhattab, M. M., Hady, N. A. A., & Dahman, Y. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00021-8 · Cited by 24
Misenan, M. S. M., Ali, E. S., & Khiar, A. S. A. (2018) · AIP conference proceedings · doi:10.1063/1.5041231 · Cited by 18
Barrera, C. S., & Cornish, K. (2019) · Journal of Composites Science · doi:10.3390/jcs3040102 · Cited by 20
“Crystallinity impacts particle tensile strength, modulus and water resistance, and so affects their reinforcing potential [11,31,54,127].”
BackgroundMethodKamelnia, E., Divsalar, A., Darroudi, M., Yaghmaei, P., & Sadri, K. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.12.179 · Cited by 18
Cellulose and hydrogel matrices for environmental applications
Arfin, T. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-816789-2.00012-2 · Cited by 18
Development and characterization of cellulose nanofibre reinforced Acacia nilotica gum nanocomposite
Joseph, M. R., Nizam, P. A., Gopakumar, S., et al. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2020.113180 · Cited by 18
Derivation of Nanocellulose from Native Rice Husk
Hossain, M. I., Zaman, H., & Rahman, T. (2018) · Chemical Engineering Research Bulletin · doi:10.3329/cerb.v20i1.36926 · Cited by 18
Superhydrophobic and Superoleophobic Nanostructured Cellulose and Cellulose Composites
Ras, R. H. A., Tian, X., & Bayer, I. S. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch22 · Cited by 19
High-performance cellulose aerogel membrane for lithium-ion battery separator
Rong, Y., Fang, L., Shi, Z., et al. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.140535 · Cited by 17
Lima, M., Gomez, L. D., Steele‐King, C. G., et al. (2015) · Apple Academic Press eBooks · doi:10.1201/b18460-4 · Cited by 17
Metadata
- Authors
- Siqueira, G., Bras, J., & Dufresne, A.
- Affiliations
- Institut polytechnique de Grenoble (FR)
- Corresponding author
- Dufresne, Alain
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2010-12-13
- Volume
- 2
- Issue
- 4
- Pages
- 728-765
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1980921765
- Semantic Scholar
- 88e39e80ebe121f79b7f4d6157891419553dc112
- Cited by
- 1,328
- References
- 151
- Citations by year
- 2026: 44 · 2025: 59 · 2024: 69 · 2023: 89 · 2022: 91 · 2021: 111 · 2020: 83 · 2019: 111 · 2018: 101 · 2017: 118 · 2016: 102 · 2015: 113 · 2014: 117 · 2013: 59 · 2012: 41
- FWCI
- 15.68
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cellulose nanocrystals, microfibrillated cellulose, cellulose nanoparticles, biocomposites, mechanical properties, barrier properties, packaging materials, emulsion processing, natural fibers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.