CoChat

Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications

Open access

The DOI matches its Crossref record; 147 of the 151 references it cites were found in a registry or an index; 5 of the 201 sources its claims cite were checked for support.

Abstract

Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC)—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have shown that cellulose nanoparticles could be used as fillers to improve mechanical and barrier properties of biocomposites. Their use for industrial packaging is being investigated, with continuous studies to find innovative solutions for efficient and sustainable systems. Processing is more and more important and different systems are detailed in this paper depending on the polymer solubility, i.e., (i) hydrosoluble systems, (ii) non-hydrosoluble systems, and (iii) emulsion systems. This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.

Overview

CoChat Summary

TL;DR

This review summarizes preparation, properties, and applications of cellulosic bionanocomposites reinforced with cellulose nanocrystals/whiskers and microfibrillated cellulose (MFC). It reports that these nanofillers can strongly improve mechanical and barrier properties, often via a percolating hydrogen-bonded network, while processing and industrial scale-up remain challenging.

Key findings

  • Cellulose nanoparticles act as effective reinforcing fillers; the strong effect is generally attributed to formation of a percolating network above the percolation threshold from hydrogen bonding between nanoparticles.
  • Mechanical examples include poly(S-co-BuA) latex with 30 wt% wheat straw cellulose whiskers showing a rubbery Young’s modulus more than 1000-times higher than the bulk matrix; 10 wt% cellulose palm tree whiskers in natural rubber decreased strain at break from 575% to 16%; 5 wt% MFC improved PU modulus by approximately 200% at 5 °C and close to 500% at 85 °C; and PLA-MFC modulus increased from 5 GPa at 10 wt% MFC to almost 9 GPa at 70 wt% MFC.
  • Barrier properties can improve: pure MFC films had oxygen transmission rate values of 17.0 and 17.8 mL m⁻² day⁻¹; MFC coating on PLA decreased OTR from 746 to 1 mL m⁻² day⁻¹ Pa⁻¹; and 10 wt% sulfonated whiskers in xylan/sorbitol films decreased WVTR from 304 to 174 g h⁻¹ m⁻².
  • Thermal behavior varies: several studies found no important Tg changes with cellulose nanofillers, while moisture, plasticization, and filler content can alter Tg and crystallinity depending on the system.

Methods

  • Narrative review of cellulose nanoparticles (whiskers/nanocrystals and MFC), their preparation, characterization, properties, and applications, citing more than 150 references.
  • Describes processing routes classified by polymer solubility: hydrosoluble systems, emulsion systems, and non-hydrosoluble systems, plus solvent casting, extrusion, surfactant coating, and surface chemical modification/grafting.
  • No new experimental data are generated; the paper synthesizes selected published works and cites SciFinder literature trends, e.g., papers on “cellulose and nano” increased from 57 in 2000 to more than 700 in 2009.

Limitations

  • The paper states that toxicity is not discussed because of “a lot of uncertainty,” that practical transition from laboratory to industrial scale is not simple and requires chemical engineering to reduce nanoparticle production costs, and that inconsistent terminology for cellulose nanoparticles causes misunderstanding and ambiguity.
  • Evident from the text: as a narrative review, it summarizes “some selected works” rather than using a described systematic search or inclusion criteria, and it does not perform quantitative meta-analysis.
  • Evident from the text: many property claims are drawn from cited studies rather than independently verified here, and the review notes limited reported use of cellulose nanocrystals for barrier properties and possible porosity in nanocomposite films reducing MFC efficiency.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/polym2040728

Cites

147 of 147 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

5 Valid · 6 Not valid · 149 Not checked · 42 Own results and interpretations

108 more claims

Create a free account to see all 202 claims and to verify the 1 reference still open.

See all claims — free account
  • Probably not a substantial claim. 61
  • It may state two separate claims as one. 45

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

3 of 3

Citations

Cites

Show all 147 references

Research works printed but not linked: 9

  1. Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
  2. Nalwa, H.S. Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publisher. [2nd ed.]. in press.
  3. Brännvall, E. (2007). Aspect on Strength Delivery and Higher Utilisation of Strength Potential of Soft Wood Kraft Pupl Fibres. [Ph.D. Thesis, KTH, Royal Institute of Technology].
  4. Kroschwitz, 2003, Cellulose, Encyclopedia of Polymler Science and Technology, Volume 5, 473
  5. Lu, 2008, Surface modification of microfibrillated cellulose for epoxy composite applications, Polymer, 49, 1285, 10.1016/j.polymer.2008.01.028 · DOI · Paper page
  6. Herrick, 1983, Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci. Appl. Polym. Symp., 37, 797
  7. Khademhosseini, 2006, Nanobiotechnology—Drug delivery and tissue engineering, Chem. Engin. Progress, 102, 38
  8. Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
  9. Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].

Cited by

Items 701–800 of 1,323

Metadata

Authors
Siqueira, G., Bras, J., & Dufresne, A.
Affiliations
Institut polytechnique de Grenoble (FR)
Corresponding author
Dufresne, Alain
Venue
Polymers
Publisher
MDPI AG
Published
2010-12-13
Volume
2
Issue
4
Pages
728-765
ISSN
2073-4360 (ISSN-L)
OpenAlex
W1980921765
Cited by
1,328
References
151
Citations by year
2026: 44 · 2025: 59 · 2024: 69 · 2023: 89 · 2022: 91 · 2021: 111 · 2020: 83 · 2019: 111 · 2018: 101 · 2017: 118 · 2016: 102 · 2015: 113 · 2014: 117 · 2013: 59 · 2012: 41
FWCI
15.68
Type
journal article
Language
en
Open access
Locations
  • Polymers (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
  • Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
  • Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
Keywords
cellulose nanocrystals, microfibrillated cellulose, cellulose nanoparticles, biocomposites, mechanical properties, barrier properties, packaging materials, emulsion processing, natural fibers

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.