Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Open accessThe DOI matches its Crossref record; 147 of the 151 references it cites were found in a registry or an index; 5 of the 201 sources its claims cite were checked for support.
Abstract
Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC)—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have shown that cellulose nanoparticles could be used as fillers to improve mechanical and barrier properties of biocomposites. Their use for industrial packaging is being investigated, with continuous studies to find innovative solutions for efficient and sustainable systems. Processing is more and more important and different systems are detailed in this paper depending on the polymer solubility, i.e., (i) hydrosoluble systems, (ii) non-hydrosoluble systems, and (iii) emulsion systems. This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.
Overview
CoChat Summary
TL;DR
This review summarizes preparation, properties, and applications of cellulosic bionanocomposites reinforced with cellulose nanocrystals/whiskers and microfibrillated cellulose (MFC). It reports that these nanofillers can strongly improve mechanical and barrier properties, often via a percolating hydrogen-bonded network, while processing and industrial scale-up remain challenging.
Key findings
- Cellulose nanoparticles act as effective reinforcing fillers; the strong effect is generally attributed to formation of a percolating network above the percolation threshold from hydrogen bonding between nanoparticles.
- Mechanical examples include poly(S-co-BuA) latex with 30 wt% wheat straw cellulose whiskers showing a rubbery Young’s modulus more than 1000-times higher than the bulk matrix; 10 wt% cellulose palm tree whiskers in natural rubber decreased strain at break from 575% to 16%; 5 wt% MFC improved PU modulus by approximately 200% at 5 °C and close to 500% at 85 °C; and PLA-MFC modulus increased from 5 GPa at 10 wt% MFC to almost 9 GPa at 70 wt% MFC.
- Barrier properties can improve: pure MFC films had oxygen transmission rate values of 17.0 and 17.8 mL m⁻² day⁻¹; MFC coating on PLA decreased OTR from 746 to 1 mL m⁻² day⁻¹ Pa⁻¹; and 10 wt% sulfonated whiskers in xylan/sorbitol films decreased WVTR from 304 to 174 g h⁻¹ m⁻².
- Thermal behavior varies: several studies found no important Tg changes with cellulose nanofillers, while moisture, plasticization, and filler content can alter Tg and crystallinity depending on the system.
Methods
- Narrative review of cellulose nanoparticles (whiskers/nanocrystals and MFC), their preparation, characterization, properties, and applications, citing more than 150 references.
- Describes processing routes classified by polymer solubility: hydrosoluble systems, emulsion systems, and non-hydrosoluble systems, plus solvent casting, extrusion, surfactant coating, and surface chemical modification/grafting.
- No new experimental data are generated; the paper synthesizes selected published works and cites SciFinder literature trends, e.g., papers on “cellulose and nano” increased from 57 in 2000 to more than 700 in 2009.
Limitations
- The paper states that toxicity is not discussed because of “a lot of uncertainty,” that practical transition from laboratory to industrial scale is not simple and requires chemical engineering to reduce nanoparticle production costs, and that inconsistent terminology for cellulose nanoparticles causes misunderstanding and ambiguity.
- Evident from the text: as a narrative review, it summarizes “some selected works” rather than using a described systematic search or inclusion criteria, and it does not perform quantitative meta-analysis.
- Evident from the text: many property claims are drawn from cited studies rather than independently verified here, and the review notes limited reported use of cellulose nanocrystals for barrier properties and possible porosity in nanocomposite films reducing MFC efficiency.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
5 Valid · 6 Not valid · 149 Not checked · 42 Own results and interpretations
In the paper
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers. This result was surprising due to the high specific area of such nanofillers, e.g., around 170 m 2 g -1 for tunicin whiskers [139].”
- Also stated in: § 3.2. Thermal Properties · plain
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers.”
What the sources say
- Not checked — no full text of the sourcecites [139] Angles, 2000, Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3.2. Thermal Properties · plain
In the paper
“However, it seems that, at least under the conditions presented in this work, the cellulose chemical modification via grafting-from technique changes partially the cellulose crystallinity.”
What the sources say
- Not checked — no full text of the sourcecites [44] Morandi, 2009, Cellulose nanocrystals grafted with polystyrene chains through surface-initiated atom transfer radical polymerization (SI-ATRP), Langmuir source
hedgedstates a possible causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Indeed, classical predicting models for short-fiber composites cannot be applied.”
What the sources say
- Not checked — no full text of the sourcecites [71] Favier, 1995, Polymer nanocomposites reinforced by cellulose whiskers, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
What the sources say
- Not checked — no full text of the sourcecites [136] Seydibeyoglu, 2008, Novel nanocomposites based on polyurethane and micro fibrillated cellulose, Compos. Sci. Technol. source
- Not checked — no full text of the sourcecites [137] Wu, 2007, A high strength nanocomposite based on microcrystalline cellulose and polyurethane, Biomacromolecules source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“High efficiency was reached by this method that allowed esterification of cellulose nanoparticles to different extents with fatty acid chlorides.”
What the sources say
- Not checked — no full text of the sourcecites [129] Berlioz, 2009, Gas-phase surface esterification of cellulose microfibrils and whiskers, Biomacromolecules source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
108 more claims
Create a free account to see all 202 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 61
- It may state two separate claims as one. 45
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
“This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.”
§ References
“150. Saxena, A.; Ragauskas, A.J. Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan. Carbohyd. Polym. 2009 , 78 , 357-360.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ References
“23. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1296.”
§ References
“35. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1298.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3.2. Thermal Properties
“However, when bacterial cellulose nanocrystals were modified with silane groups, Tm values were founded to increase with increasing filler content. According to the authors, this difference was due to stronger interactions between silylated whiskers and PVA matrix.”
§ 3.2. Thermal Properties
“Grunert et al. [43] in their work with cellulose acetate butyrate (CAB) reinforced with bacterial cellulose nanocrystals.”
Citations
Cites
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980 · cited 1×
“[61] gives a clear overview of such cellulosic nanomaterials.”
BackgroundComposites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 5×
“The term ―natural fibers‖ is used to designate numerous kinds of fibers that are naturally produced by plants, animals and minerals [5].”
BackgroundInfluentialNishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676 · cited 1×
“Indeed lignocellulosic materials start to degrade near 220 °C restricting the type of matrix that can be used in association with natural fillers [22,101].”
BackgroundCellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493 · cited 2×
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
MethodJOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · cited 1×
“their ability to form hydrogen bonds play a major role in directing the crystalline packing and also governing the physical properties of cellulose [16].”
BackgroundAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Self-citationPääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796 · cited 1×
“[85,86] have proposed a new process to obtain MFC based on TEMPO reaction and strong mixing.”
MethodNatural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Research works printed but not linked: 9
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Nalwa, H.S. Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publisher. [2nd ed.]. in press.
- Brännvall, E. (2007). Aspect on Strength Delivery and Higher Utilisation of Strength Potential of Soft Wood Kraft Pupl Fibres. [Ph.D. Thesis, KTH, Royal Institute of Technology].
- Kroschwitz, 2003, Cellulose, Encyclopedia of Polymler Science and Technology, Volume 5, 473
- Lu, 2008, Surface modification of microfibrillated cellulose for epoxy composite applications, Polymer, 49, 1285, 10.1016/j.polymer.2008.01.028 · DOI · Paper page
- Herrick, 1983, Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci. Appl. Polym. Symp., 37, 797
- Khademhosseini, 2006, Nanobiotechnology—Drug delivery and tissue engineering, Chem. Engin. Progress, 102, 38
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
Cited by
Items 501–600 of 1,323
Qi, Y., Zhang, H., Xu, D., He, Z., Pan, X., Gui, S., Dai, X., Fan, J., Dong, X., & Li, Y. (2020) · Molecules · doi:10.3390/molecules25010227 · Cited by 37
Li, J., & Wu, D. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.02.123 · Cited by 36
Nanocellulose as an Avenue for Drug Delivery Applications: A Mini-Review
Varghese, R. S., Cherian, R. M., Chirayil, C. J., Antony, T., Kargarzadeh, H., & Thomas, S. (2023) · Journal of Composites Science · doi:10.3390/jcs7060210 · Cited by 40
Cellulose from Lignocellulosic Waste
Michelin, M., Ruíz, H. A., Silva, D. P., Ruzene, D. S., Teixeira, J. A., & Polizeli, M. D. L. T. D. M. (2015) · Springer eBooks · doi:10.1007/978-3-319-16298-0_52 · Cited by 51
Hassan, M. L., Mathew, A. P., Hassan, E. A., Fadel, S. M., & Oksman, K. (2013) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684413509292 · Cited by 39
“However, it indicates good coverage of the nanofibers’ surfaces since the fraction of cellulose chains at the surface of the nanofibers represents not more than 10% of total cellulose chains.(23) Similar results were obtained in case of modification of sisal nanofibers using the same reagent (N%1⁄4 0.”
ResultCataldi, A., Berglund, L. A., Deflorian, F., et al. (2015) · Nanocomposites · doi:10.1080/20550324.2015.1117239 · Cited by 36
Yu, H., Zhang, H., Abdalkarim, S. Y. H., Yang, L., Zhu, J., Gu, J., & Yao, J. (2018) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2018.09.016 · Cited by 36
Prospects on utilization of biopolymer materials for ion exchange membranes in fuel cells
Samaniego, A. J., & Espiritu, R. (2022) · Green Chemistry Letters and Reviews · doi:10.1080/17518253.2022.2040599 · Cited by 39
“talline regions, as opposed to amorphous regions, lead to higher mechanical strength and stiffness (30).”
BackgroundLi, J., Lu, D., Yang, J., et al. (2023) · Cellulose · doi:10.1007/s10570-023-05160-5 · Cited by 35
Adsorbent based on MOF-5/cellulose aerogel composite for adsorption of organic dyes from wastewater
Shiri, M., Hosseinzadeh, M., Shiri, S., & Javanshir, S. (2024) · Scientific Reports · doi:10.1038/s41598-024-65774-y · Cited by 35
“These peaks align with the pattern specified in the literature, indicating the presence of MOF-5 with its expected crystal structure (as reported in reference 49 46).”
BackgroundResultFabrication and electrical characterization of bamboo fiber-reinforced polypropylene composite
Latif, S. S., Nahar, S., & Hasan, M. (2014) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684414565941 · Cited by 36
Moodley, V., Maddila, S., Jonnalagadda, S. B., et al. (2017) · New Journal of Chemistry · doi:10.1039/c7nj00855d · Cited by 35
Retractedda Silva, C. G., Kano, F. S., & Rosa, D. D. S. (2019) · Waste and Biomass Valorization · doi:10.1007/s12649-019-00610-3 · Cited by 39
Reyes, G., Lundahl, M. J., Alejandro-Martín, S., Arteaga-Pérez, L. E., Oviedo, C., King, A. W. T., & Rojas, O. J. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.9b01559 · Cited by 37
Fabrication of Flame Retarded Cellulose Aerogel with Hydrophobicity via MF/MTMS Double Cross-Linking
Yue, X., Zhang, S., He, J., et al. (2022) · Journal of Natural Fibers · doi:10.1080/15440478.2022.2133053 · Cited by 34
“Due to the characteristics such as biodegradability, low cost and renewability, cellulose-based materials have become a hot research field in biomass materials (Siqueira, Bras, and Dufresne 2010, Mokhena et al. 2020).”
BackgroundJin, Y. H., Hengl, N., Baup, S., Pignon, F., Gondrexon, N., Sztucki, M., Romdhane, A., Guillet, A., & Aurousseau, M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.01.073 · Cited by 43
Bai, H., Zhou, Y., & Zhang, L. (2014) · Advances in Polymer Technology · doi:10.1002/adv.21471 · Cited by 37
Potato peeling costreams as raw materials for biopolymer film preparation
Rommi, K., Rahikainen, J. L., Vartiainen, J., Holopainen‐Mantila, U., Lahtinen, P., Honkapää, K., & Lantto, R. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42862 · Cited by 39
Macrostructure and optical studies of hydroxypropyl cellulose in pure and Nano-composites forms
Alharbi, N. D., & Guirguis, O. W. (2019) · Results in Physics · doi:10.1016/j.rinp.2019.102637 · Cited by 34
Bionanocomposite Films from Resilin-CBD Bound to Cellulose Nanocrystals
Rivkin, A., Abitbol, T., Nevo, Y., Verker, R., Lapidot, S., Komarov, A., Veldhuis, S. C., Zilberman, G., Reches, M., Cranston, E. D., et al. (2015) · Industrial Biotechnology · doi:10.1089/ind.2014.0026 · Cited by 36
Oğuzlu, H., Danumah, C., & Boluk, Y. (2016) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.22597 · Cited by 35
Analysis on cellulose extraction from hybrid biomass for improved crystallinity
Kalpana, V. P., & Perarasu, V. T. (2020) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2020.128350 · Cited by 33
Nanocellulose and microcrystalline cellulose from citrus processing waste: A review
Ciriminna, R., Petri, G. L., Angellotti, G., et al. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.135865 · Cited by 33
“…drawback related to the use of nanocellulose in polymer composites, namely the inherent difficulty to disperse the highly polar cellulose nanofibrils in non-polar media, that so far limited the effective incorporation of cellulose nanocrystals as polymer reinforcing agents only to polar media [28].”
Camargos, C. H. M., de Figueiredo, J. C. D., & Pereira, F. V. (2016) · Journal of Cultural Heritage · doi:10.1016/j.culher.2016.10.007 · Cited by 33
Smyth, M., M’Bengue, M.-S., Terrien, M., Picart, C., Bras, J., & Foster, E. J. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.002 · Cited by 38
Self-citationEffects of Sodium Montmorillonite on the Preparation and Properties of Cellulose Aerogels
Long, L., Li, F., Weng, Y., et al. (2019) · Polymers · doi:10.3390/polym11030415 · Cited by 33
“Today, because the depletion of petroleum resources and serious environmental pollution continue to increase, the preparation of cellulose-based functional materials has attracted increasing attention from scientists and society [1,2].”
BackgroundFabrication of transparent paper devices from nanocellulose fiber
Dinesh, G., & Kandasubramanian, B. (2022) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2022.125707 · Cited by 38
Structure and solution properties of cyanoethyl celluloses synthesized in LiOH/urea aqueous solution
Li, Q., Wu, P., Zhou, J., et al. (2011) · Cellulose · doi:10.1007/s10570-011-9609-9 · Cited by 33
“Nowadays, there is a growing tendency to use environmentally friendly or ‘‘green’’ materials (Siqueira et al. 2010; Kim and Yun 2006).”
BackgroundHassan, M. L., ABOUZEID, R. E., Fadel, S. M., El‐Sakhawy, M., & Khiari, R. (2014) · International Journal of Nanoparticles · doi:10.1504/ijnp.2014.067613 · Cited by 36
Kupka, V., Zhou, Q., Ansari, F., Tang, H., Šlouf, M., Vojtová, L., Berglund, L. A., & Jančář, J. (2018) · Polymer Composites · doi:10.1002/pc.24748 · Cited by 34
Peculiarities of cellulose nanoparticles
Ioelovich, M. (2014) · TAPPI Journal · doi:10.32964/tj13.5.45 · Cited by 36
Abdollahi, S., & Raoufi, Z. (2022) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2022.103423 · Cited by 32
de Carvalho, A. P. A., Santos, R. É. P. D. D., & Conte‐Júnior, C. A. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.123851 · Cited by 42
Mechanical and thermal properties of starch films reinforced with microcellulose fibres
Nordin, N., Othman, S. H., Basha, R. K., & Rashid, S. B. A. (2018) · Food Research · doi:10.26656/fr.2017.2(6).110 · Cited by 36
Impoolsup, T., Chiewchan, N., & Devahastin, S. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115630 · Cited by 32
Rezaei-DashtArzhandi, M., Sarrafzadeh, M., Goh, P. S., et al. (2020) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.6455 · Cited by 32
Copenhaver, K., Li, K., Lamm, M. E., Walker, C. C., Johnson, D. A., Han, Y., Wang, L., Zhao, X., Pu, Y., Hinton, H. E., et al. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c03890 · Cited by 34
Piccinno, F., Hischier, R., Saba, A., Mitrano, D. M., Seeger, S., & Som, C. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.06.105 · Cited by 36
“Another drawback is that cellulose degrades at high temperatures limiting both the potential application as well as its ability to be processed under such conditions, and hence reducing the compatibility with certain matrix materials (Azizi Samir et al., 2005; Kamel, 2007; Siqueira et al., 2010).”
BackgroundSarangi, P. K., Srivastava, R. K., Sahoo, U. K., Singh, A. K., Parikh, J. K., Bansod, S. P., Parsai, G., Luqman, M., Shadangi, K. P., Diwan, D., et al. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.140833 · Cited by 37
Suzuki, K., Homma, Y., Igarashi, Y., Okumura, H., Semba, T., Nakatsubo, F., & Yano, H. (2015) · Cellulose · doi:10.1007/s10570-015-0845-2 · Cited by 31
Mechanical properties of TEMPO-oxidised bacterial cellulose-amino acid biomaterials
Pahlevan, M., Toivakka, M., & Alam, P. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.02.013 · Cited by 32
Generation, Development and Modifications of Natural Fibers
Abbas, M., & Jeon, H. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.78111 · Cited by 35
Jadhav, H., Jadhav, A., Takkalkar, P., Hossain, N., Nizamuddin, S., Zahoor, M., Jamal, M., Mubarak, N. M., Griffin, G. J., & Kao, N. (2020) · Journal of Polymer Research · doi:10.1007/s10965-020-02287-y · Cited by 31
Souza, A. G., de Lima, G. F., Colombo, R., & Rosa, D. D. S. (2020) · Cellulose · doi:10.1007/s10570-020-03160-3 · Cited by 33
Design and characterization of cellulose nanocrystal-enhanced epoxy hardeners
Peng, S. X., Moon, R. J., & Youngblood, J. P. (2014) · Green Materials · doi:10.1680/gmat.14.00015 · Cited by 33
Current technologies to control fungal diseases in postharvest papaya (Carica papaya L.)
Rodrigues, J. P., Coelho, C. C. D. S., Soares, A. G., & Freitas‐Silva, O. (2021) · Biocatalysis and Agricultural Biotechnology · doi:10.1016/j.bcab.2021.102128 · Cited by 44
Rubber Nanocomposites: Latest Trends and Concepts
Ponnamma, D., Maria, H. J., Chandra, A. K., & Thomas, S. (2013) · Advanced structured materials · doi:10.1007/978-3-642-20928-4_3 · Cited by 38
Charreau, H., Foresti, M. L., & Vázquez, A. (2012) · Recent Patents on Nanotechnology · doi:10.2174/1872210511307010056 · Cited by 64
“…cellulose elements; cellulose nanoparticles, cellulose nanofibers, cellulose nanofibrils, cellulose microfibrils, cellulose fibrils, nanocellulose, nanoscale cellulose, nanocellulosics and nanosized cellulose fibrils, are just some of the terms that have been frequently used [6, 30-31 , 33].”
InfluentialExtraction Optimization and Characterization of Cellulose Nanocrystals from Apricot Pomace
KASAPOĞLU, E. D., Kahraman, S., & Törnük, F. (2023) · Foods · doi:10.3390/foods12040746 · Cited by 31
“The terms such as “cellulose nanowhiskers”, “cellulose nanocrystals (CNCs)”, “nanocrystalline cellulose (NCC)”, “monocrystals”, “microcrystals”, and “microcrystallites” are commonly used to describe nano-scale cellulose derivatives [8].”
Luminescent cellulose fibers modified with cerium fluoride doped with terbium particles
Kulpiński, P., Erdman, A., Grzyb, T., et al. (2014) · Polymer Composites · doi:10.1002/pc.23166 · Cited by 29
Analyses of Biomass Fibers by XRD, FT-IR, and NIR
Ferrer, A., Alciaturi, C. E., Noguera, A. M. F., & Ríos, J. (2016) · Springer eBooks · doi:10.1007/978-3-319-41414-0_3 · Cited by 40
Roy, D., Kotula, A. P., Natarajan, B., Gilman, J. W., Fox, D. M., & Migler, K. B. (2018) · Polymer · doi:10.1016/j.polymer.2018.08.007 · Cited by 29
Peng, C., Yang, Q., Zhao, W., Ren, J., Yu, Q., Hu, Y., & Zhang, X. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.04.029 · Cited by 28
Processing cellulose@Fe3O4 into mechanical, magnetic and biodegradable synapse-like material
Zhang, Y., Li, J., Ma, N., Meng, Z., & Sui, G. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107432 · Cited by 30
Dual responsive wool fabric by cellulose nanowhisker reinforced shape memory polyurethane
Memiş, N. K., & Kaplan, S. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.48674 · Cited by 27
Microscale 3D Printing and Tuning of Cellulose Nanocrystals Reinforced Polymer Nanocomposites
Groetsch, A., Stelzl, S., Nagel, Y., Kochetkova, T., Scherrer, N. C., Ovsianikov, A., Michler, J., Pethő, L., Siqueira, G. D. F., Nyström, G., et al. (2022) · Small · doi:10.1002/smll.202202470 · Cited by 28
Self-citationRice straw as a source of nanocellulose for sustainable food packaging materials: A Review
Islam, M., Saini, P., Das, R., Shekhar, S., Sinha, A. S. K., & Prasad, K. (2022) · BioResources · doi:10.15376/biores.18.1.islam · Cited by 43
“However, adding reinforcement fillers such NC to the PVOH can improve its water resistance capacity and enhance its mechanical and thermal properties (Solikhin et al. 2018).”
BackgroundAlgae as a Source of Microcrystalline Cellulose
Samiee, S., Ahmadzadeh, H., Hosseini, M., & Lyon, S. (2019) · Advanced Bioprocessing for Alternative Fuels, Biobased Chemicals, and Bioproducts · doi:10.1016/b978-0-12-817941-3.00017-6 · Cited by 29
Strategies to mitigate the synergistic effects of moist-heat aging on TEMPO-oxidized nanocellulose
Camargos, C. H. M., Poggi, G., Chelazzi, D., Baglioni, P., & de Rezende, C. A. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.109943 · Cited by 31
Nanocellulose as a carrier for improved drug delivery: Progresses and innovation
Das, M., Lalsangi, S. B., Santra, S., & Banerjee, R. (2024) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2024.105743 · Cited by 31
Market Opportunities for Cellulose Products From Combined Renewable Resources
Žihare, L., & Blumberga, D. (2017) · Environmental and Climate Technologies · doi:10.1515/rtuect-2017-0003 · Cited by 28
Farooq, A., Jiang, S., Farooq, A., Naeem, M. A., Ahmad, A., & Liu, L. (2019) · Journal of Industrial Textiles · doi:10.1177/1528083719887533 · Cited by 29
Gerbin, E., Frapart, Y., Marcuello, C., Cottyn, B., Foulon, L., Pernes, M., Crônier, D., Molinari, M., Chabbert, B., Ducrot, P., et al. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00583 · Cited by 34
Peterson, A., Mehandzhiyski, A. Y., Svenningsson, L., Ziółkowska, A., Kádár, R., Lund, A., Sandblad, L., Evenäs, L., Re, G. L., Zozoulenko, I. V., et al. (2021) · Macromolecules · doi:10.1021/acs.macromol.0c02305 · Cited by 28
Metal–Ligand Complexes as Dynamic Sacrificial Bonds in Elastic Polymers
Mareliati, M., Tadiello, L., Guerra, S., Giannini, L., Schrettl, S., & Weder, C. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00752 · Cited by 31
Boroujeni, F. M., Fioravanti, G., & Kander, R. (2024) · Materials · doi:10.3390/ma17020526 · Cited by 31
“Natural fibers such as cotton, flax, bamboo, jute, and hemp exhibit relatively high strength, stiffness, and low density, though their properties are influenced by factors such as geography, climate, and plant age [5].”
BackgroundAll starch nanocomposite coating for barrier material
Corre, D. L., Dufresne, A., Rueff, M., Khelifi, B., & Bras, J. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39826 · Cited by 30
Self-citationNanocellulose—fabrication, structure, properties, and application in the area of care and cure
Ioelovich, M. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-41533-0.00009-x · Cited by 40
Khiari, R., Salon, M. B., Mhenni, M. F., et al. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.01.037 · Cited by 28
Milanez, D. H., de Faria, L. I. L., do Amaral, R. M., et al. (2017) · World Patent Information · doi:10.1016/j.wpi.2017.08.008 · Cited by 28
Protein depletion with bacterial cellulose nanofibers
Göktürk, I., Tamahkar, E., Yılmaz, F., & Denizli, A. (2018) · Journal of Chromatography B · doi:10.1016/j.jchromb.2018.08.030 · Cited by 28
Extraction of Lignocellulosic Materials From Waste Products
Fortunati, E., Luzi, F., Puglia, D., & Torre, L. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-44248-0.00001-8 · Cited by 44
Cheikh, S. B., Cheikh, R. B., Cunha, E., Lopes, P. E., & Paiva, M. C. (2018) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1080/14658011.2018.1479822 · Cited by 28
Cellulose nanocrystal research; A personal perspective
Gray, D. G. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116888 · Cited by 27
Organocatalyzed ring opening polymerization of lactide from the surface of cellulose nanofibrils
Lalanne-Tisné, M., Mees, M. A., Eyley, S., Zinck, P., & Thielemans, W. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116974 · Cited by 29
Alternative High-Performance Fibers for Nonwoven HEPA Filter Media
Beckman, I. P., Berry, G., Cho, H., & Riveros, G. A. (2022) · Aerosol Science and Engineering · doi:10.1007/s41810-022-00161-6 · Cited by 29
Microfibrillated cellulose-SiO2 composite nanopapers produced by spray deposition
Krol, L. F., Beneventi, D., Alloin, F., & Chaussy, D. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-8965-5 · Cited by 30
“Leaving aside thermoplastic polymer nanocomposites [4, 5], where MFC, used as reinforcing phase, represents a small fraction of the composite mass, today MFC is mostly used as a building block in the elaboration of bulk or composite nanopaper for both high strength/barrier packaging [6, 7], and energy/electronic appli…”
MethodLeite, L. S. F., Battirola, L. C., da Silva, L. C. E., & Gonçalves, M. D. C. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44201 · Cited by 28
Carboxymethylcellulose reinforced starch films and rapid detection of spoiled beverages
Qin, S., Sun, H., Wan, X., et al. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.1099118 · Cited by 26
“the two macromolecular chains of starch and CMC, which hindered the movement of the macromolecular chains and inhibited the pyrolysis of the films (Siqueira et al., 2010).”
BackgroundLalji, S. M., Ali, S. I., & Khan, M. A. (2023) · Petroleum Chemistry · doi:10.1134/s0965544123060178 · Cited by 27
Incorporation of Cellulose-Based Aerogels into Textile Structures
Sözcü, S., Venkataraman, M., Wiener, J., Tomková, B., Militký, J., & Mahmood, A. (2023) · Materials · doi:10.3390/ma17010027 · Cited by 25
“As a result, the plant source significantly impacts the structure and performance of cellulose aerogels [34,35].”
Mechanical, thermal, and barrier properties of methylcellulose/cellulose nanocrystals nanocomposites
Silvério, H. A., Neto, W. P. F., da Silva, I. S. V., Rosa, J. R., Pasquini, D., de Assunção, R. M. N., Barud, H. D. S., & Ribeiro, S. J. L. (2014) · Polímeros · doi:10.1590/0104-1428.1691 · Cited by 34
Kurian, J., Gariépy, Y., Orsat, V., & Raghavan, G. S. V. (2015) · Bioresources and Bioprocessing · doi:10.1186/s40643-015-0059-3 · Cited by 27
Heidarian, P., Behzad, T., & Karimi, K. (2016) · Wood Science and Technology · doi:10.1007/s00226-016-0820-6 · Cited by 27
“Their results indicated that the nanocellulose preparation process was optimized after 30 cycles of passing through the homogenizer while the nanocellulose diameter ranged between 10 and 20 nm with particle morphologies exhibiting lower flexibility, strength, and aspect ratio as compared to CNF (Siqueira et al. 2010).”
MethodPHBV/CNC bionanocomposites processed by extrusion: Structural characterization and properties
Malmir, S., Montero, B., Rico, M., et al. (2017) · Polymer Composites · doi:10.1002/pc.24634 · Cited by 26
de Lima, G. F., Souza, A. G., Bauli, C. R., Barbosa, R. F. S., Rocha, D. B., & Rosa, D. D. S. (2019) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-09109-4 · Cited by 25
“As presented in the literature, these peaks are typical for the native cellulose structure [35, 36].”
BackgroundYang, G., Ma, G., He, M. H., Ji, X., Li, W., Youn, H. J., Lee, H. L., & Chen, J. (2021) · Nanomaterials · doi:10.3390/nano11020439 · Cited by 24
Luo, B., An, X., Yang, J. H., et al. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117865 · Cited by 26
Glycerol-based polymer adhesives reinforced with cellulose nanocrystals
Figueiredo, L. R. F., Nepomuceno, N. C., Melo, J. D. D., & Medeiros, E. S. D. (2021) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2021.102935 · Cited by 29
Pignon, F., Semeraro, E. F., Chèvremont, W., Bodiguel, H., Hengl, N., Karrouch, M., & Sztucki, M. (2021) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.1c03506 · Cited by 26
Bionanocomposites films applied as active and smart food packaging: A review
Naskar, A., Sanyal, I., Nahar, N., Ghosh, D. D., & Chakraborty, S. (2023) · Polymer Engineering and Science · doi:10.1002/pen.26415 · Cited by 28
Zhang, H., Zeng, X., Xie, J., et al. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.060 · Cited by 26
Bažant, P., Kuřitka, I., Münster, L., Machovský, M., Kožáková, Z., & Sáha, P. (2014) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-014-5274-5 · Cited by 26
Microcrystalline Cellulose from Plant Wastes through Sodium Hydroxide-Anthraquinone-Ethanol Pulping
Oluwasina, O. O., Lajide, L., & Owolabi, B. J. (2014) · BioResources · doi:10.15376/biores.9.4.6166-6192 · Cited by 26
“According to the Food and Agricultural Organization (FAO), each year farmers harvest around 35 million tons of natural fibers from a wide range of plant and animals (Siqueira et al. 2010).”
BackgroundKuang, Y., Chen, G., Ming, S., Wu, Z., & Fang, Z. (2016) · Cellulose · doi:10.1007/s10570-016-0906-1 · Cited by 26
“The TEMPO oxidation isa favoredpretreatment for thepreparationof individualized CNFs with high yield and low energy consumption (Isogai et al. 2011; Saito et al. 2006, 2007; Siqueira et al. 2010).”
Rathore, A., & Pradhan, M. K. (2017) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.02.294 · Cited by 26
Coatability of cellulose nanofibril suspensions: Role of rheology and water retention
Kumar, V., Ottesen, V., Syverud, K., Gregersen, Ø. W., & Toivakka, M. (2017) · BioResources · doi:10.15376/biores.12.4.7656-7679 · Cited by 29
“…food packaging (Johansson et al. 2012; Paunonen 2013; Khan et al. 2014; Li et al. 2015; Azeredo et al. 2016; Hubbe et al. 2017), composites (Siqueira et al. 2010; Spence et al. 2011; Khan et al. 2014; Lee et al. 2014; Khalil et al. 2016), rheology modification and colloid science…”
BackgroundYadav, C., Saini, A., & Maji, P. K. (2017) · Cellulose · doi:10.1007/s10570-017-1567-4 · Cited by 26
Peng, C., Dong, B., Zhang, C., Hu, Y., Liu, L., & Zhang, X. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00606 · Cited by 27
Structural characterization of carboxyl cellulose nanofibers extracted from underutilized sources
Zhan, C., Sharma, P. R., Geng, L., Sharma, S. K., Wang, R., Joshi, R., & Hsiao, B. S. (2019) · Science China Technological Sciences · doi:10.1007/s11431-018-9441-1 · Cited by 26
Metadata
- Authors
- Siqueira, G., Bras, J., & Dufresne, A.
- Affiliations
- Institut polytechnique de Grenoble (FR)
- Corresponding author
- Dufresne, Alain
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2010-12-13
- Volume
- 2
- Issue
- 4
- Pages
- 728-765
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1980921765
- Semantic Scholar
- 88e39e80ebe121f79b7f4d6157891419553dc112
- Cited by
- 1,328
- References
- 151
- Citations by year
- 2026: 44 · 2025: 59 · 2024: 69 · 2023: 89 · 2022: 91 · 2021: 111 · 2020: 83 · 2019: 111 · 2018: 101 · 2017: 118 · 2016: 102 · 2015: 113 · 2014: 117 · 2013: 59 · 2012: 41
- FWCI
- 15.68
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cellulose nanocrystals, microfibrillated cellulose, cellulose nanoparticles, biocomposites, mechanical properties, barrier properties, packaging materials, emulsion processing, natural fibers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.