Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Open accessThe DOI matches its Crossref record; 147 of the 151 references it cites were found in a registry or an index; 5 of the 201 sources its claims cite were checked for support.
Abstract
Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC)—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have shown that cellulose nanoparticles could be used as fillers to improve mechanical and barrier properties of biocomposites. Their use for industrial packaging is being investigated, with continuous studies to find innovative solutions for efficient and sustainable systems. Processing is more and more important and different systems are detailed in this paper depending on the polymer solubility, i.e., (i) hydrosoluble systems, (ii) non-hydrosoluble systems, and (iii) emulsion systems. This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.
Overview
CoChat Summary
TL;DR
This review summarizes preparation, properties, and applications of cellulosic bionanocomposites reinforced with cellulose nanocrystals/whiskers and microfibrillated cellulose (MFC). It reports that these nanofillers can strongly improve mechanical and barrier properties, often via a percolating hydrogen-bonded network, while processing and industrial scale-up remain challenging.
Key findings
- Cellulose nanoparticles act as effective reinforcing fillers; the strong effect is generally attributed to formation of a percolating network above the percolation threshold from hydrogen bonding between nanoparticles.
- Mechanical examples include poly(S-co-BuA) latex with 30 wt% wheat straw cellulose whiskers showing a rubbery Young’s modulus more than 1000-times higher than the bulk matrix; 10 wt% cellulose palm tree whiskers in natural rubber decreased strain at break from 575% to 16%; 5 wt% MFC improved PU modulus by approximately 200% at 5 °C and close to 500% at 85 °C; and PLA-MFC modulus increased from 5 GPa at 10 wt% MFC to almost 9 GPa at 70 wt% MFC.
- Barrier properties can improve: pure MFC films had oxygen transmission rate values of 17.0 and 17.8 mL m⁻² day⁻¹; MFC coating on PLA decreased OTR from 746 to 1 mL m⁻² day⁻¹ Pa⁻¹; and 10 wt% sulfonated whiskers in xylan/sorbitol films decreased WVTR from 304 to 174 g h⁻¹ m⁻².
- Thermal behavior varies: several studies found no important Tg changes with cellulose nanofillers, while moisture, plasticization, and filler content can alter Tg and crystallinity depending on the system.
Methods
- Narrative review of cellulose nanoparticles (whiskers/nanocrystals and MFC), their preparation, characterization, properties, and applications, citing more than 150 references.
- Describes processing routes classified by polymer solubility: hydrosoluble systems, emulsion systems, and non-hydrosoluble systems, plus solvent casting, extrusion, surfactant coating, and surface chemical modification/grafting.
- No new experimental data are generated; the paper synthesizes selected published works and cites SciFinder literature trends, e.g., papers on “cellulose and nano” increased from 57 in 2000 to more than 700 in 2009.
Limitations
- The paper states that toxicity is not discussed because of “a lot of uncertainty,” that practical transition from laboratory to industrial scale is not simple and requires chemical engineering to reduce nanoparticle production costs, and that inconsistent terminology for cellulose nanoparticles causes misunderstanding and ambiguity.
- Evident from the text: as a narrative review, it summarizes “some selected works” rather than using a described systematic search or inclusion criteria, and it does not perform quantitative meta-analysis.
- Evident from the text: many property claims are drawn from cited studies rather than independently verified here, and the review notes limited reported use of cellulose nanocrystals for barrier properties and possible porosity in nanocomposite films reducing MFC efficiency.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
5 Valid · 6 Not valid · 149 Not checked · 42 Own results and interpretations
In the paper
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers. This result was surprising due to the high specific area of such nanofillers, e.g., around 170 m 2 g -1 for tunicin whiskers [139].”
- Also stated in: § 3.2. Thermal Properties · plain
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers.”
What the sources say
- Not checked — no full text of the sourcecites [139] Angles, 2000, Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3.2. Thermal Properties · plain
In the paper
“However, it seems that, at least under the conditions presented in this work, the cellulose chemical modification via grafting-from technique changes partially the cellulose crystallinity.”
What the sources say
- Not checked — no full text of the sourcecites [44] Morandi, 2009, Cellulose nanocrystals grafted with polystyrene chains through surface-initiated atom transfer radical polymerization (SI-ATRP), Langmuir source
hedgedstates a possible causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Indeed, classical predicting models for short-fiber composites cannot be applied.”
What the sources say
- Not checked — no full text of the sourcecites [71] Favier, 1995, Polymer nanocomposites reinforced by cellulose whiskers, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
What the sources say
- Not checked — no full text of the sourcecites [136] Seydibeyoglu, 2008, Novel nanocomposites based on polyurethane and micro fibrillated cellulose, Compos. Sci. Technol. source
- Not checked — no full text of the sourcecites [137] Wu, 2007, A high strength nanocomposite based on microcrystalline cellulose and polyurethane, Biomacromolecules source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“High efficiency was reached by this method that allowed esterification of cellulose nanoparticles to different extents with fatty acid chlorides.”
What the sources say
- Not checked — no full text of the sourcecites [129] Berlioz, 2009, Gas-phase surface esterification of cellulose microfibrils and whiskers, Biomacromolecules source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
108 more claims
Create a free account to see all 202 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 61
- It may state two separate claims as one. 45
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
“This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.”
§ References
“150. Saxena, A.; Ragauskas, A.J. Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan. Carbohyd. Polym. 2009 , 78 , 357-360.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ References
“23. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1296.”
§ References
“35. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1298.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3.2. Thermal Properties
“However, when bacterial cellulose nanocrystals were modified with silane groups, Tm values were founded to increase with increasing filler content. According to the authors, this difference was due to stronger interactions between silylated whiskers and PVA matrix.”
§ 3.2. Thermal Properties
“Grunert et al. [43] in their work with cellulose acetate butyrate (CAB) reinforced with bacterial cellulose nanocrystals.”
Citations
Cites
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980 · cited 1×
“[61] gives a clear overview of such cellulosic nanomaterials.”
BackgroundComposites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 5×
“The term ―natural fibers‖ is used to designate numerous kinds of fibers that are naturally produced by plants, animals and minerals [5].”
BackgroundInfluentialNishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676 · cited 1×
“Indeed lignocellulosic materials start to degrade near 220 °C restricting the type of matrix that can be used in association with natural fillers [22,101].”
BackgroundCellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493 · cited 2×
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
MethodJOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · cited 1×
“their ability to form hydrogen bonds play a major role in directing the crystalline packing and also governing the physical properties of cellulose [16].”
BackgroundAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Self-citationPääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796 · cited 1×
“[85,86] have proposed a new process to obtain MFC based on TEMPO reaction and strong mixing.”
MethodNatural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Research works printed but not linked: 9
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Nalwa, H.S. Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publisher. [2nd ed.]. in press.
- Brännvall, E. (2007). Aspect on Strength Delivery and Higher Utilisation of Strength Potential of Soft Wood Kraft Pupl Fibres. [Ph.D. Thesis, KTH, Royal Institute of Technology].
- Kroschwitz, 2003, Cellulose, Encyclopedia of Polymler Science and Technology, Volume 5, 473
- Lu, 2008, Surface modification of microfibrillated cellulose for epoxy composite applications, Polymer, 49, 1285, 10.1016/j.polymer.2008.01.028 · DOI · Paper page
- Herrick, 1983, Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci. Appl. Polym. Symp., 37, 797
- Khademhosseini, 2006, Nanobiotechnology—Drug delivery and tissue engineering, Chem. Engin. Progress, 102, 38
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
Cited by
Items 801–900 of 1,323
Water and Oxygen Barrier Properties of All-Cellulose Nanocomposites
Rader, C., Grillo, L., & Weder, C. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.3c01337 · Cited by 10
Wei, X., Zhu, H., Hong, D., et al. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.4c01838 · Cited by 10
Barzegarzadeh, M., Hazrati, A. M., & Amini‐Fazl, M. S. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.141875 · Cited by 15
Lapka, T., Mazúr, P., Prokeš, J., Lhotka, M., Jurča, M., Dendisová, M., Jankovský, O., & Hassouna, F. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.117046 · Cited by 10
Tungsten oxide–cellulose nanocrystal composite films for electrochromic applications
Stoenescu, S., Bǎdilescu, S., Sharma, T., Brüning, R., & Truong, V. (2016) · Optical Engineering · doi:10.1117/1.oe.55.12.127102 · Cited by 10
“Different acids have been used, with different effects.(28)”
MethodBhardwaj, M., & Saxena, D. C. (2017) · Indian Journal of Science and Technology · doi:10.17485/ijst/2017/v10i31/113864 · Cited by 12
Chen, H.-C., Tze, W. T. Y., & Chang, F. (2020) · Cellulose · doi:10.1007/s10570-020-03190-x · Cited by 12
Chandra, C. S. J., Bipinbal, P. K., Renju, V. S., Raman, V., K, B. S. T., Sasi, S., & Antony, J. V. (2022) · Journal of Polymer Research · doi:10.1007/s10965-022-03069-4 · Cited by 12
Arnoldussen, B., Alhamid, J. O., Wang, P., et al. (2022) · Frontiers in Plant Science · doi:10.3389/fpls.2022.949537 · Cited by 10
“These nanocrystals can be renewably produced on an industrial scale from different plant materials such as wood pulp and agricultural byproducts (e.g., soybean, corn, sugarcane bagasse, hemp) (Siqueira et al., 2010; Costa et al., 2015; Cudjoe et al., 2017; Martelli-Tosi et al., 2018).”
BackgroundWei, C. Y., Wang, W., Liu, H., Qin, A., Yu, C., & Wang, B. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3831 · Cited by 10
Padash, A., Halabian, R., Salimi, A., Kazemi, N. M., & Shahrousvand, M. (2020) · Human Cell · doi:10.1007/s13577-020-00449-0 · Cited by 11
Flaxseed gum/agar blends and nanocomposites: preparation and physical properties
Prado, N. S., da Silva, I. S. V., Nascimento, J. A. D. A., Pasquini, D., & Otaguro, H. (2021) · Iranian Polymer Journal · doi:10.1007/s13726-021-00933-w · Cited by 12
Adhesion and Surface Issues in Biocomposites and Bionanocomposites
Jose, C., Thomas, M. S., Deepa, B., Pothan, L. A., & Thomas, S. (2014) · Reviews of Adhesion and Adhesives · doi:10.7569/raa.2014.097303 · Cited by 12
Nuruddin, M., Hosur, M. V., Triggs, E., & Jeelani, S. (2014) · ASME International Mechanical Engineering Congress and Exposition (IMECE) · doi:10.1115/imece2014-36174 · Cited by 10
Okra Fibres as Potential Reinforcement in Biocomposites
Santulli, C., Fabrizio Sarasini, A., Fortunati, E., Puglia, D., & Kenny, J. M. (2014) · Springer eBooks · doi:10.1007/978-3-319-07641-6_11 · Cited by 13
Morphological Analyses of Some Micro- and Nanofibrils from Birch and Wheat Straw Sources
Suopajärvi, T., Liimatainen, H., & Niinimäki, J. (2014) · Journal of Wood Chemistry and Technology · doi:10.1080/02773813.2014.892990 · Cited by 11
Novel production method for in-situ hydrophobization of a microfibrillated cellulose network
Rastogi, V. K., & Samyn, P. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.01.060 · Cited by 10
“Therefore, major efforts have been put forward for hydrophobic surface modification of MFC [6,7], in parallel with common methods applied for the modification of cellulose in papermaking [8]: several chemical pathways include silylation, acetylation, grafting, plasma-assisted coating, pentafluorobenzoylation, esterifi…”
MethodTercjak, A., Gutierrez, J., Mondragón, G., & Mondragòn, I. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp2054958 · Cited by 10
Ingverud, T., Larsson, E., Hemmer, G., Rojas, R., Malkoch, M., & Carlmark, A. (2016) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.28225 · Cited by 10
A New Strategy to Produce Hemp Fibers through a Waterglass-Based Ecofriendly Process
Bifulco, A., Silvestri, B., Passaro, J., Boccarusso, L., Roviello, V., Branda, F., & Durante, M. (2020) · Materials · doi:10.3390/ma13081844 · Cited by 11
Extraction, Preparation and Characterization: Nanocellullose
(2017) · International Journal of Science and Research (IJSR) · doi:10.21275/13121701 · Cited by 10
Biomass Derived and Biomass Inspired Polymers in Pharmaceutical Applications
Bartzoka, E. D., Crestini, C., & Lange, H. (2015) · Wiley eBooks · doi:10.1002/9781119041450.ch5 · Cited by 12
Sugar beet leaves for functional ingredients
Tenorio, A. T. (2017) · doi:10.18174/409816 · Cited by 23
Mechanical and Dynamic Mechanical Analysis of Bio‐based Composites
Ilyas, R. A., Sapuan, S. M., Asyraf, M. R. M., Atikah, M. S. N., Ibrahim, R., Norrrahim, M. N. F., Yasim‐Anuar, T. A. T., & Megashah, L. N. (2021) · Wiley eBooks · doi:10.1002/9783527822331.ch3 · Cited by 14
Thomas, S. K., Dileep, P., & Begum, P. M. S. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.11.613 · Cited by 9
Azlouk, M., Basyooni, M. A., Eker, Y. R., et al. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.102228 · Cited by 9
“In the first instance, nanocellulose has been used as filler in polymer matrixes for windmill blades, lightweight armor, or flexible batteries [30 – 32].”
Bio-nanocomposites: Fundamentals and Recent Advances
Farooq, K., Kumawat, Y. K., Sharma, K., & Kumar, V. (2024) · Springer series on polymer and composite materials · doi:10.1007/978-3-031-69654-1_1 · Cited by 13
4D printing of natural materials: A review
Arsuffi, B., Magrini, T., Champeau, M., Siqueira, G. D. F., & Titotto, S. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01346 · Cited by 23
Self-citationPlant Derived Polymers, Properties, Modification & Applications
Bhatia, S. (2016) · Springer eBooks · doi:10.1007/978-3-319-41129-3_4 · Cited by 15
Nanomaterials-Based Health Care and Bioanalytical Applications: Trend and Prospects
Sandeep, K. V. (2013) · Journal of Nanomaterials & Molecular Nanotechnology · doi:10.4172/2324-8777.1000109 · Cited by 10
Preparation of niacinamide imprinted starch-based biomaterials for treating of hyperpigmentation
Lee, S.-Y., Yeon-HumYun, Ahn, G., et al. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123382 · Cited by 9
Perspective Chapter: Cellulose in Food Production – Principles and Innovations
Sabbaghi, H. (2023) · IntechOpen eBooks · doi:10.5772/intechopen.109204 · Cited by 17
Electrical and Optical Properties of Nanocellulose Films and Its Nanocomposites
Kim, H., Kwon, H., Jeon, S., Park, J., Sunthornvarabhas, J., & Sriroth, K. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_74 · Cited by 10
Electrospinning of Poly(Vinyl Alcohol) Nanofiber Mats Reinforced by Lignocellulose Nanowhiskers
Šutka, A., Šutka, A., Gravitis, J. A., et al. (2014) · Soft Materials · doi:10.1080/1539445x.2014.995309 · Cited by 9
Aimi, M. N. N., Anuar, H., Maizirwan, M., Sapuan, S. M., Wahit, M. U., & Zakaria, S. (2015) · Cited by 9
Supramolecular reinforcement of styrene-butadiene rubber composites
Tan, X., Zhao, Y., Shang, M., et al. (2017) · Polymer · doi:10.1016/j.polymer.2017.06.056 · Cited by 9
Wang, H., Tan, H., Hua, S., Liu, Z., Yang, W. M., & Yang, M. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201700409 · Cited by 10
Biocomposite Reinforced with Nanocellulose for Packaging Applications
Perumal, A. B., Sellamuthu, P. S., Nambiar, R. B., Sadiku, E. R., & Adeyeye, O. A. (2019) · Materials horizons · doi:10.1007/978-981-13-8063-1_4 · Cited by 18
Evaluation of cellulose based patches for oral mucosal impairment
Laffleur, F., & Egeling, M. (2020) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2020.101839 · Cited by 9
Silver Nanoparticles with Natural Polymers
Jadoun, S., & Dilfi, K. F. A. (2021) · Engineering materials · doi:10.1007/978-3-030-44259-0_6 · Cited by 9
Roy, B. L. F., Heinrich, L. A., Tayo, L. L., Malmström, E., & Engström, J. (2021) · SPE Polymers · doi:10.1002/pls2.10058 · Cited by 10
Fly ash as a potential filler for the rubber industry
Barrera, C. S., & Cornish, K. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-817686-3.00010-4 · Cited by 11
Stoyanov, S. R., Lyubimova, O., Gusarov, S., & Kovalenko, A. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p144-155 · Cited by 9
“The outstanding mechanical properties of CNC (Lahiji et al. 2010) make it very attractive as reinforcing additive in nanocomposite materials (Siqueira et al. 2010; Zainuddin et al. 2013; de Mesquita et al. 2012; Khan et al. 2013; Chen et al. 2012), hydrogels (Abitbol et al. 2011; Dorris, Gray 2012;…”
Rizkiansyah, R. R., Mardiyati, M., Steven, S., & Suratman, R. (2016) · AIP conference proceedings · doi:10.1063/1.4945525 · Cited by 11
Controlled delivery systems of cellulose matrix for oxytetracycline: In vitro dissolution
Mishra, D., Khare, P., Shanker, K., Singh, D. K., & Luqman, S. (2016) · European Journal of Molecular & Clinical Medicine · doi:10.1016/j.nhtm.2016.06.001 · Cited by 9
Araújo, R. D. S., Marques, M. D. F. V., de Oliveira, P. F., & Calado, C. R. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-018-1253-0 · Cited by 9
“According to Siqueira [46], the mobility reduction of the polymer chains can be observed by the increase of Tg.”
BackgroundBogdanova, O. I., Istomina, A. P., Glushkova, N. A., Belousov, S. I., Kuznetsov, N. M., Polyakov, D. K., Malakhov, S. N., Krasheninnikov, S. V., Bakirov, A. V., Kamyshinsky, R. A., et al. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.07.194 · Cited by 9
Polyethylene Composites with Lignocellulosic Material
Fernandes, E. M., Mano, J. F., & Reis, R. L. (2015) · Wiley eBooks · doi:10.1002/9781118831328.ch5 · Cited by 9
Industrial Applications of Cellulose Extracted from Agricultural and Food Industry Wastes
Rashid, S., & Dutta, H. (2022) · Wiley eBooks · doi:10.1002/9781119818816.ch18 · Cited by 12
Nanocellulose as Reinforcement Materials for Polymer Matrix Composites
Punia, H., Tokas, J., Bhadu, S., Rani, A., Sangwan, S., Kamboj, A., Yashveer, S., & Baloda, S. (2022) · Springer eBooks · doi:10.1007/978-3-030-89621-8_25 · Cited by 19
One-Component Nanocomposites Made from Diblock Copolymer Grafted Cellulose Nanocrystals
Rader, C., Fritz, P. W., Ashirov, T., Coşkun, A., & Weder, C. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.3c01196 · Cited by 11
A Fully Plant-Based Water- and Oil-Resistant Paper Composite
Zhou, Z., Rajan, K., Saedi, S., Labbé, N., Li, M., Wang, W., & Wang, S. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c06079 · Cited by 9
Raeisi, A., Ara, I., Holt, G. A., et al. (2025) · ACS Omega · doi:10.1021/acsomega.4c06854 · Cited by 8
Utilization of cellulose nanofiber in dental applications: A systematic review of in vitro evidence
Yang, K., Nugraha, A. P., Chen, J., Yang, H., Wang, J., Sáenz, J. R. V., & Hong, G. (2025) · Japanese Dental Science Review · doi:10.1016/j.jdsr.2025.05.002 · Cited by 8
“Crystalline cellulose regions provide rigidity and strength, enhancing the Young ’ s modulus, while extensive hydrogen bonding among hydroxyl groups forms a robust network that contributes to tensile strength and modulus [9,36,37].”
Habib, M. L., Munshi, M. H., Kamruzzaman, M., et al. (2025) · Results in Materials · doi:10.1016/j.rinma.2025.100735 · Cited by 8
Applications of Rubber Based Biocomposites and Bionanocomposites
Jayalakshmy, M. S. (2017) · Advanced structured materials · doi:10.1007/978-3-319-48806-6_8 · Cited by 8
Processing and Properties of Starch-Based Thermoplastic Matrix for Green Composites
Ribba, L., Lorenzo, M. C., Tupa, M. V., Melaj, M. A., Eisenberg, P., & Goyanes, S. (2021) · Materials horizons · doi:10.1007/978-981-15-9643-8_4 · Cited by 10
Study on the Characteristics of the Dispersion and Conductivity of Surfactants for the Nanofluids
Kim, S.-D. (2022) · Nanomaterials · doi:10.3390/nano12091537 · Cited by 8
“Cellulose nanocrystals (CNCs) have become widespread in many studies [13,14].”
BackgroundThe Prospects and Challenges of Biopolymers for Enhanced Oil Recovery (EOR)
Matovanni, M. P. N., Ikhsanudin, M. N., Arvianto, R. I., Waluyo, J., Distantina, S., Kaavessina, M., & Pranolo, S. H. (2023) · EKUILIBIUM · doi:10.20961/equilibrium.v7i1.73947 · Cited by 11
“Cellulose and its derivatives are one of the most abundant sources of renewable biopolymer on earth [23] with annual production estimated at about 10 bn tonnes [24].”
BackgroundHaridevan, H., Evans, D. A. C., Martin, D. J., et al. (2024) · Materials Advances · doi:10.1039/d3ma00865g · Cited by 8
Kareem, F., Chandrawati, R., & Ahmed, M. U. (2024) · Measurement · doi:10.1016/j.measurement.2024.115499 · Cited by 17
Silva, F. L., Correia, C. A., Oliveira, L. M., Ribeiro, H., & Valera, T. S. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.120023 · Cited by 9
Preparation of bionanocomposites and bionanomaterials from agricultural wastes
Abdellaoui, H., Bouhfid, R., & Qaiss, A. E. K. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00015-2 · Cited by 15
MHUMAK, C., & Pechyen, C. (2018) · Walailak Journal of Science and Technology (WJST) · doi:10.48048/wjst.2018.5967 · Cited by 8
Bionanocomposites in food industry
Akram, N., Anjum, M. N., Malik, F. Z., Rehman, S., Hafeez, I., Murtaza, M. A., & Arshad, M. U. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-816751-9.00016-7 · Cited by 10
Sharma, M., Chouksey, S., Gond, L., et al. (2022) · Polymer Bulletin · doi:10.1007/s00289-021-04073-2 · Cited by 8
Cellulose-Based Hydrogel for Industrial Applications
Billah, S. M. R., Mondal, M. I. H., Somoal, S. H., & Pervez, M. N. (2019) · Polymers and polymeric composites · doi:10.1007/978-3-319-77830-3_63 · Cited by 12
Farzi, A., Soltani, M., Ostadrahimi, A., Soleimanzadeh, H., & Namjoufar, M. (2023) · Applied Water Science · doi:10.1007/s13201-023-02046-6 · Cited by 8
“(Siqueira et al. 2010; John & Thomas 2008; Lucenius et al. 2019; Chen et al. 2021).”
BackgroundPaper‐sheet biocomposites based on wood pulp grafted with poly(ε‐caprolactone)
Bruce, C., Nilsson, C., Malmström, E., & Fogelström, L. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42039 · Cited by 8
Pérez, L. A. M. D. P., Morales–Cepeda, A. B., Castro–Guerrero, C. F., et al. (2021) · Cellulose · doi:10.1007/s10570-021-03922-7 · Cited by 8
“excellent mechanical properties and biodegradability (Bohn et al. 2005; Bras et al. 2010; Akihiro et al. 2011), which is fundamental to decrease overall pollution.”
BackgroundRouilly, A., & Vaca‐García, C. (2014) · Wiley eBooks · doi:10.1002/9781118714478.ch6 · Cited by 9
Development of hydrophobic thermoplastic starch composites
Fazeli, M. (2018) · Americanae (AECID Library) · Cited by 26
Adhesion in Biocomposites: A Critical Review
Mary, S. K., Thomas, M. S., Koshy, R. R., Pillai, P. K. S., Pothan, L. A., & Thomas, S. (2021) · Wiley eBooks · doi:10.1002/9781119846703.ch11 · Cited by 8
High-performance and sustainable clear water-based coatings for outdoor wood protection: A review
Jorbandian, A., Ashori, A., & Jonoobi, M. (2025) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2025.109452 · Cited by 9
Hussain, Z., Ahmed, D. J., Alkabra, R. M., Thu, H. E., Khan, S., Sohail, M. F., Sarfraz, R. M., & Ramli, N. A. (2021) · International Journal of Polymeric Materials · doi:10.1080/00914037.2021.2006655 · Cited by 8
Bautkinová, T., Mazúr, P., Soukupová, G., Dendisová, M., Prokeš, J., Jurča, M., Kopecký, D., Lhotka, M., Ulbrich, P., & Hassouna, F. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07491-3 · Cited by 6
“Those features make the nanocellulose an attractive choice for various applications [4, 5].”
BackgroundBiodegradable polymer nanocomposites for food packaging applications
Törnük, F., & Akman, P. K. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91696-7.00006-4 · Cited by 9
Rehman, N., Muhammad, N., Ullah, H., Khan, M. N., Rahman, L. U., Jan, A. K., & Hassan, T. (2023) · Zeitschrift für Physikalische Chemie · doi:10.1515/zpch-2022-0174 · Cited by 7
Liu, Y., Liu, D., & Sui, G. (2015) · Polymer Composites · doi:10.1002/pc.23831 · Cited by 7
XRD and FTIR Studies of Natural Cellulose Isolated from Pineapple (Ananas comosus) Leaf Fibres
Ibrahim, N. A., Azraaie, N., Abidin, N. A. M. Z., Razali, N. A. M., Aziz, F. H. A., & Zakaria, S. (2015) · Advanced materials research · doi:10.4028/www.scientific.net/amr.1087.197 · Cited by 7
Hassouna, F., Korbelářová, J., Jaquet, B., Kutorglo, E. M., Kopecký, D., Ulbrich, P., Fulem, M., Hrdlička, Z., & Šoóš, M. (2018) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2018.05.054 · Cited by 7
Sahu, P., & Bhowmick, A. K. (2020) · Processes · doi:10.3390/pr8060726 · Cited by 9
“Cellulose nanofibrils (CNFs) are biobased, biodegradable, and can be derived from several renewable sources, including wood pulp, cotton and tunicates [20].”
BackgroundElectrochemical applications of nanocellulose
Mohammed, M. A., Basirun, W. J., Rahman, N. M. M. A., & Salleh, N. M. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-822350-5.00013-8 · Cited by 8
Starch-based nanomaterials in drug delivery applications
Ali, K. A., Roy, P. K., Hossain, C. M., Dutta, D., Vichare, R., & Biswal, M. R. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820874-8.00023-3 · Cited by 13
Thermoplastic natural fiber based composites
Berzin, F., & Vergnes, B. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821090-1.00015-6 · Cited by 11
Saeed, U., Rather, S., Al-Turaif, H., & Bamufleh, H. S. (2021) · Journal of Nanomaterials · doi:10.1155/2021/9076170 · Cited by 9
“The inhomogeneous distribution and low compatibility of NCF in polymer matrix resulted in end product with inadequate and unsuitable properties [21, 22].”
BackgroundFang, L., Chen, J., Wang, P., et al. (2022) · Diamond and Related Materials · doi:10.1016/j.diamond.2022.109137 · Cited by 7
Nonwoven viscose fabric‐polyvinyl alcohol based flexible composite
Chatterjee, A., Singh, H., & Chaudhary, K. (2022) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.21941 · Cited by 7
Hasan, K. M. F., Horváth, P. G., Baş, S., Mucsi, Z. M., Bak, M., & Alpár, T. (2022) · Elsevier eBooks · doi:10.1016/b978-0-443-15186-6.00030-8 · Cited by 10
Nanofillers and Nanomaterials for Green Based Nanocomposites
González, F. J. F., González-Castillo, E. I., Peña, A., et al. (2022) · Engineering materials · doi:10.1007/978-3-031-18428-4_2 · Cited by 7
Cellulose Acetate Nanocomposites with Antimicrobial Properties
Dobos, A. M., Onofrei, M. D., & Ioan, S. (2015) · Advanced structured materials · doi:10.1007/978-81-322-2470-9_12 · Cited by 8
Biodegradable Polymer/Clay Nanocomposites
Ludueña, L. N., Morán, J., & Álvarez, V. A. (2015) · Advanced structured materials · doi:10.1007/978-81-322-2470-9_4 · Cited by 7
Green hybrid composites from cellulose nanocrystal
Rahimi, S. K., & Otaigbe, J. U. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100791-4.00004-5 · Cited by 9
Fortunati, E., Verma, D., Luzi, F., Mazzaglia, A., Torre, L., & Balestra, G. M. (2017) · Springer eBooks · doi:10.1007/978-3-319-48281-1_15-1 · Cited by 9
Bilek, S., Melikoğlu, A. Y., & Cesur, S. (2019) · Akademik Gıda · doi:10.24323/akademik-gida.544980 · Cited by 7
“Ancak selüloz esaslı nanomalzemeleri tanımlamak amacıyla çok farklı terminolojilerin kullanıldığı ve bunların da belirsizliklere yol açtığı düşünülmektedir [20].”
Extraction and Characterization of Cellulose Nanofibers from Banana Plant
Deepa, B., Abraham, E., Koshy, R. R., Pothan, L. A., & Thomas, S. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_54 · Cited by 9
“it is not necessary to synthesize them, and they allow the production of composite films with excellent visible light transmittance which are easily modified chemically (their structure has a reactive surface of –OH side groups) that facilitate grafting chemical species to achieve different surface properties [15–17].”
Andrea, P.-M., Fernández-Luqueño, F., Hernández, H. P., Vázquez-Núñez, E., Ileana, V.-R., & Ali, A. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821912-6.00001-8 · Cited by 8
Effects of Dilute Acid Pretreatment on Chemical and Physical Properties of Kenaf Biomass
Aimi, M. N. N., Anuar, H., Nurhafizah, S. M., et al. (2015) · Journal of Natural Fibers · doi:10.1080/15440478.2014.919894 · Cited by 7
“The alteration of lignin leads to better surface accessibility for enzymes by increasing the sizes and number of pores (Siqueira et al. 2010; Tang et al. 2011).”
BackgroundMultifunctional Ternary Polymeric Nanocomposites Based on Cellulosic Nanoreinforcements
Puglia, D., Fortunati, E., Santulli, C., & Kenny, J. M. (2014) · Wiley eBooks · doi:10.1002/9781118872246.ch6 · Cited by 13
Effect of Kenaf Cellulose Whiskers on Cellulose Acetate Butyrate Nanocomposites Properties
Zaini, L. H., Tahir, P. M., Jawaid, M., Alothman, O. Y., & Halip, J. A. (2014) · Wiley eBooks · doi:10.1002/9781118872246.ch13 · Cited by 8
Metadata
- Authors
- Siqueira, G., Bras, J., & Dufresne, A.
- Affiliations
- Institut polytechnique de Grenoble (FR)
- Corresponding author
- Dufresne, Alain
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2010-12-13
- Volume
- 2
- Issue
- 4
- Pages
- 728-765
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1980921765
- Semantic Scholar
- 88e39e80ebe121f79b7f4d6157891419553dc112
- Cited by
- 1,328
- References
- 151
- Citations by year
- 2026: 44 · 2025: 59 · 2024: 69 · 2023: 89 · 2022: 91 · 2021: 111 · 2020: 83 · 2019: 111 · 2018: 101 · 2017: 118 · 2016: 102 · 2015: 113 · 2014: 117 · 2013: 59 · 2012: 41
- FWCI
- 15.68
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cellulose nanocrystals, microfibrillated cellulose, cellulose nanoparticles, biocomposites, mechanical properties, barrier properties, packaging materials, emulsion processing, natural fibers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.