The DOI matches its Crossref record; 187 of the 187 references it cites were found in a registry or an index.
Digital Twins in Pharmaceutical and Biopharmaceutical Manufacturing: A Literature Review
Open accessAbstract
The development and application of emerging technologies of Industry 4.0 enable the realization of digital twins (DT), which facilitates the transformation of the manufacturing sector to a more agile and intelligent one. DTs are virtual constructs of physical systems that mirror the behavior and dynamics of such physical systems. A fully developed DT consists of physical components, virtual components, and information communications between the two. Integrated DTs are being applied in various processes and product industries. Although the pharmaceutical industry has evolved recently to adopt Quality-by-Design (QbD) initiatives and is undergoing a paradigm shift of digitalization to embrace Industry 4.0, there has not been a full DT application in pharmaceutical manufacturing. Therefore, there is a critical need to examine the progress of the pharmaceutical industry towards implementing DT solutions. The aim of this narrative literature review is to give an overview of the current status of DT development and its application in pharmaceutical and biopharmaceutical manufacturing. State-of-the-art Process Analytical Technology (PAT) developments, process modeling approaches, and data integration studies are reviewed. Challenges and opportunities for future research in this field are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A survey on concept drift adaptation
Gama, J., Žliobaitė, I., Bifet, A., Pechenizkiy, M., & Bouchachia, A. (2014) · ACM Computing Surveys · doi:10.1145/2523813 · Cited by 3,735
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727 · cited 2×
“As described by Grieves, the DT is a digital informational construct of a physical system, created as an entity on its own and linked with the physical system [24].”
BackgroundDigital Twin in manufacturing: A categorical literature review and classification
Kritzinger, W., Karner, M., Traar, G., Henjes, J., & Sihn, W. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.08.474 · Cited by 3,612 · cited 5×
“…ones in industry currently, including the employment of a digital model where the digital representation of a physical system exists without automated data communications in both ways, and a digital shadow where model exists with one-way data transfer from physical to virtual component [2].”
BackgroundInfluentialDigital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
Organizing for Innovation in the Digitized World
Yoo, Y., Boland, R. J., Lyytinen, K., & Majchrzak, A. (2012) · Organization Science · doi:10.1287/orsc.1120.0771 · Cited by 2,469
Characterising the Digital Twin: A systematic literature review
Jones, D., Snider, C., Nassehi, A., Yon, J., & Hicks, B. (2020) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2020.02.002 · Cited by 2,422
The Digital Twin Paradigm for Future NASA and U.S. Air Force Vehicles
Glaessgen, E., & Stargel, D. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1818 · Cited by 2,404 · cited 4×
“Since the first definition of DT, interpretations from different perspectives have been proposed, with the most popular one given by Glaessegen and Stargel, noting that a DT is an integrated multiphysics, multiscale, probabilistic simulation of a complex product and uses the best available data, sensors, and models to…”
BackgroundMethodInfluentialIntegration of Cloud computing and Internet of Things: A survey
Botta, A., de Donato, W., Persico, V., & Pescapé, A. (2016) · Future Generation Computer Systems · doi:10.1016/j.future.2015.09.021 · Cited by 2,388
Literature review of Industry 4.0 and related technologies
Oztemel, E., & Gursev, S. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1433-8 · Cited by 2,143
Digital twin: values, challenges and enablers from a modeling perspective
Rasheed, A., San, O., & Kvamsdal, T. (2020) · IEEE Access · doi:10.1109/access.2020.2970143 · Cited by 1,952
Data-driven Soft Sensors in the process industry
Kadlec, P., Gabrys, B., & Strandt, S. (2009) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2008.12.012 · Cited by 1,845 · cited 1×
“These sensors have been used to measure cake resistance in freeze-drying applications [39], measuring temperature from pyrometers [40], estimating product quality during crude distillation [41], and have also found several other industrial applications [42–45].”
MethodDIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
Prof. RajratnaKharat*1, V. B. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493929 · Cited by 1,753
Encyclopedia of Database Systems
(2009) · Springer eBooks · doi:10.1007/978-0-387-39940-9 · Cited by 1,739
Silva, B. N., Khan, M., & Han, K. (2018) · Sustainable Cities and Society · doi:10.1016/j.scs.2018.01.053 · Cited by 1,668
Enabling technologies and tools for digital twin
Qi, Q., Tao, F., Hu, T., Anwer, N., Liu, A., Wei, Y., Wang, L., & Nee, A. Y. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.10.001 · Cited by 1,579
Tao, F., Qi, Q., Wang, L., & Nee, A. Y. C. (2019) · Engineering · doi:10.1016/j.eng.2019.01.014 · Cited by 1,487
About The Importance of Autonomy and Digital Twins for the Future of Manufacturing
Rosen, R., von Wichert, G., Lo, G., & Bettenhausen, K. D. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.141 · Cited by 1,474 · cited 1×
“The concept of creating a “twin” of a process or a product can be traced back to the late 1960s when NASA ensembled two identical space vehicles for its Apollo project [20–22].”
BackgroundWang, S., Wan, J., Zhang, D., Li, D., & Zhang, C. (2016) · Computer Networks · doi:10.1016/j.comnet.2015.12.017 · Cited by 1,404
Digital twin shop-floor: a new shop-floor paradigm towards smart manufacturing
Tao, F., & Zhang, M. (2017) · IEEE Access · doi:10.1109/access.2017.2756069 · Cited by 1,397
Shaping the digital twin for design and production engineering
Schleich, B., Anwer, N., Mathieu, L., & Wartzack, S. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.040 · Cited by 1,305
Reengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119
Leveraging Digital Twin Technology in Model-Based Systems Engineering
Madni, A. M., Madni, C. C., & Lucero, S. D. (2019) · Systems · doi:10.3390/systems7010007 · Cited by 1,050
A hybrid neural network‐first principles approach to process modeling
Psichogios, D. C., & Ungar, L. H. (1992) · AIChE Journal · doi:10.1002/aic.690381003 · Cited by 982
Legner, C., Eymann, T., Hess, T., Matt, C., Böhmann, T., Drews, P., Mädche, A., Urbach, N., & Ahlemann, F. (2017) · Business & Information Systems Engineering · doi:10.1007/s12599-017-0484-2 · Cited by 979
Sanders, A., Elangeswaran, C., & Wulfsberg, J. (2016) · Journal of Industrial Engineering and Management · doi:10.3926/jiem.1940 · Cited by 938
A Complex View of Industry 4.0
Roblek, V., Meško, M., & Krapež, A. (2016) · Sage Open · doi:10.1177/2158244016653987 · Cited by 926
C2PS: A Digital Twin Architecture Reference Model for the Cloud-Based Cyber-Physical Systems
Alam, K. M., & El Saddik, A. (2017) · IEEE Access · doi:10.1109/access.2017.2657006 · Cited by 741
Human-machine-interaction in the industry 4.0 era
Gorecky, D., Schmitt, M., Loskyll, M., & Zuhlke, D. (2014) · 2014 12th IEEE International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin.2014.6945523 · Cited by 724
Advances in surrogate based modeling, feasibility analysis, and optimization: A review
Bhosekar, A., & Ierapetritou, M. (2018) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2017.09.017 · Cited by 707
Self-citationDigital Twins in Health Care: Ethical Implications of an Emerging Engineering Paradigm
Bruynseels, K., Santoni de Sio, F., & van den Hoven, J. (2018) · Frontiers in Genetics · doi:10.3389/fgene.2018.00031 · Cited by 704
Zhuang, C., Liu, J., & Xiong, H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1617-6 · Cited by 693
The promise of artificial intelligence in chemical engineering: Is it here, finally?
Venkatasubramanian, V. (2019) · AIChE Journal · doi:10.1002/aic.16489 · Cited by 664
Haag, S., & Anderl, R. (2018) · Manufacturing Letters · doi:10.1016/j.mfglet.2018.02.006 · Cited by 559 · cited 2×
“irt l c t s t c r si i it l r r s t ti f t sic l c t i ll s cts [8].”
BackgroundA review of industrial wireless networks in the context of Industry 4.0
Li, X., Li, D., Wan, J., Vasilakos, A. V., Lai, C.-F., & Wang, S. (2017) · Wireless Networks · doi:10.1007/s11276-015-1133-7 · Cited by 556
Particle Size Analysis in Pharmaceutics: Principles, Methods and Applications
Shekunov, B. Y., Chattopadhyay, P., Tong, H. H. Y., & Chow, A. H. L. (2007) · Pharmaceutical Research · doi:10.1007/s11095-006-9146-7 · Cited by 545
Webb, G. I., Hyde, R., Cao, H., Nguyen, H. L., & Petitjean, F. (2016) · Data Mining and Knowledge Discovery · doi:10.1007/s10618-015-0448-4 · Cited by 536
Review of adaptation mechanisms for data-driven soft sensors
Kadlec, P., Grbić, R., & Gabrys, B. (2011) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2010.07.034 · Cited by 517
Hybrid semi-parametric modeling in process systems engineering: Past, present and future
von Stosch, M., Oliveira, R., Peres, J., & Feyo de Azevedo, S. (2014) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2013.08.008 · Cited by 490 · cited 3×
“However, the poor interpretability, poor generalizability, and the need for large amounts of data present limitations of this modeling method [55,57,58].”
BackgroundMethodThe Digital Twin: Demonstrating the Potential of Real Time Data Acquisition in Production Systems
Uhlemann, T. H.-J., Schock, C., Lehmann, C., Freiberger, S., & Steinhilper, R. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.04.043 · Cited by 489
Digital twin-driven manufacturing cyber-physical system for parallel controlling of smart workshop
Leng, J., Zhang, H., Yan, D., Liu, Q., Chen, X., & Zhang, D. (2019) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0881-5 · Cited by 475
The Future of Pharmaceutical Manufacturing Sciences
Rantanen, J., & Khinast, J. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24594 · Cited by 442
Assessment of Recent Process Analytical Technology (PAT) Trends: A Multiauthor Review
Simon, L. L., Pataki, H., Marosi, G., Meemken, F., Hungerbühler, K., Baiker, A., Tummala, S., Glennon, B., Kuentz, M., Steele, G., et al. (2015) · Organic Process Research & Development · doi:10.1021/op500261y · Cited by 439
Bioprocess optimization using design-of-experiments methodology
Mandenius, C., & Brundin, A. (2008) · Biotechnology Progress · doi:10.1002/btpr.67 · Cited by 422
(2010) · Wiley eBooks · doi:10.1002/9780470689592 · Cited by 398
Applications of hybrid models in chemical, petroleum, and energy systems: A systematic review
Zendehboudi, S., Rezaei, N., & Lohi, A. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.06.051 · Cited by 394
A Survey on Concepts, Applications, and Challenges in Cyber-Physical Systems
(2014) · KSII Transactions on Internet and Information Systems · doi:10.3837/tiis.2014.12.001 · Cited by 392
The Living Heart Project: A robust and integrative simulator for human heart function
Baillargeon, B., Rebelo, N., Fox, D. D., Taylor, R. L., & Kuhl, E. (2014) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2014.04.001 · Cited by 370
Ding, B. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2018.06.031 · Cited by 358
Development and operation of Digital Twins for technical systems and services
Stark, R., Fresemann, C., & Lindow, K. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.04.024 · Cited by 352
The modelling and operations for the digital twin in the context of manufacturing
Bao, J., Guo, D., Li, J., & Zhang, J. (2019) · Enterprise Information Systems · doi:10.1080/17517575.2018.1526324 · Cited by 347
Francisco, A., Mohammadi, N., & Taylor, J. E. (2020) · Journal of Management in Engineering · doi:10.1061/(asce)me.1943-5479.0000741 · Cited by 325
O’Donovan, P., Leahy, K., Bruton, K., & O’Sullivan, D. T. J. (2015) · Journal of Big Data · doi:10.1186/s40537-015-0034-z · Cited by 311
Data Security and Privacy in Cloud Computing
Sun, Y., Zhang, J., Xiong, Y., & Zhu, G. (2014) · International Journal of Distributed Sensor Networks · doi:10.1155/2014/190903 · Cited by 303
Recent advances in the monitoring, modelling and control of crystallization systems
Nagy, Z. K., Fevotte, G., Kramer, H., & Simon, L. L. (2013) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2013.07.018 · Cited by 297
Bioprocessing in the Digital Age: The Role of Process Models
Narayanan, H., Luna, M. F., von Stosch, M., Cruz Bournazou, M. N., Polotti, G., Morbidelli, M., Butté, A., & Sokolov, M. (2020) · Biotechnology Journal · doi:10.1002/biot.201900172 · Cited by 247
Walther, J., Godawat, R., Hwang, C., Abe, Y., Sinclair, A., & Konstantinov, K. (2015) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2015.05.010 · Cited by 238
Sensor systems for bioprocess monitoring
Biechele, P., Busse, C., Solle, D., Scheper, T., & Reardon, K. (2015) · Engineering in Life Sciences · doi:10.1002/elsc.201500014 · Cited by 224
Read, E. K., Park, J. T., Shah, R. B., Riley, B. S., Brorson, K. A., & Rathore, A. S. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22528 · Cited by 217
Komninos, N. (2006) · 2nd IET International Conference on Intelligent Environments (IE 06) · doi:10.1049/cp:20060620 · Cited by 215
Wagner, C., Grothoff, J., Epple, U., Drath, R., Malakuti, S., Gruner, S., Hoffmeister, M., & Zimermann, P. (2017) · 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2017.8247583 · Cited by 207
Damiani, L., Demartini, M., Guizzi, G., Revetria, R., & Tonelli, F. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.08.388 · Cited by 205
Dynamic model of CHO cell metabolism
Nolan, R. P., & Lee, K. (2011) · Metabolic Engineering · doi:10.1016/j.ymben.2010.09.003 · Cited by 204
Big data challenges and opportunities in the hype of Industry 4.0
Khan, M., Wu, X., Xu, X., & Dou, W. (2017) · 2017 IEEE International Conference on Communications (ICC) · doi:10.1109/icc.2017.7996801 · Cited by 194
Bikmukhametov, T., & Jäschke, J. (2020) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2020.106834 · Cited by 194
Data science tools and applications on the way to Pharma 4.0
Steinwandter, V., Borchert, D., & Herwig, C. (2019) · Drug Discovery Today · doi:10.1016/j.drudis.2019.06.005 · Cited by 191
Pollock, J., Coffman, J., Ho, S. V., & Farid, S. S. (2017) · Biotechnology Progress · doi:10.1002/btpr.2492 · Cited by 183
Boukouvala, F., Niotis, V., Ramachandran, R., Muzzio, F. J., & Ierapetritou, M. G. (2012) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2012.02.015 · Cited by 178
Self-citationWasalathanthri, D. P., Rehmann, M. S., Song, Y., Gu, Y., Mi, L., Shao, C., Chemmalil, L., Lee, J., Ghose, S., Borys, M. C., et al. (2020) · Biotechnology and Bioengineering · doi:10.1002/bit.27461 · Cited by 177
Digital Twin of Experimental Smart Manufacturing Assembly System for Industry 4.0 Concept
Židek, K., Piteľ, J., Adámek, M., Lazorík, P., & Hošovský, A. (2020) · Sustainability · doi:10.3390/su12093658 · Cited by 177
Claßen, J., Aupert, F., Reardon, K. F., Solle, D., & Scheper, T. (2017) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-016-0068-x · Cited by 176
Current Perspectives on the Development of Industry 4.0 in the Pharmaceutical Sector
Reinhardt, I. C., Oliveira, D. J. C., & Ring, D. D. T. (2020) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2020.100131 · Cited by 174
De Beer, T. R. M., Bodson, C., Dejaegher, B., Walczak, B., Vercruysse, P., Burggraeve, A., Lemos, A., Delattre, L., Heyden, Y. V., Remon, J. P., et al. (2008) · Journal of Pharmaceutical and Biomedical Analysis · doi:10.1016/j.jpba.2008.07.023 · Cited by 166
Towards Security-Aware Virtual Environments for Digital Twins
Eckhart, M., & Ekelhart, A. (2018) · Proceedings of the 4th ACM Workshop on Cyber-Physical System Security · doi:10.1145/3198458.3198464 · Cited by 165
Cheng, Y., Zhang, Y., Ji, P., Xu, W., Zhou, Z., & Tao, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2001-2 · Cited by 161
Industry 4.0 based process data analytics platform: A waste-to-energy plant case study
Kabugo, J. C., Jämsä-Jounela, S.-L., Schiemann, R., & Binder, C. (2020) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2019.105508 · Cited by 159
Recent Advances in Crystallization control
Yu, Z.-Q., Chew, J. W., Chow, P. S., & Tan, R. B. H. (2007) · Process Safety and Environmental Protection · doi:10.1205/cherd06234 · Cited by 158
Perspectives on the continuous manufacturing of powder‐based pharmaceutical processes
Ierapetritou, M., Muzzio, F. J., & Reklaitis, G. V. (2016) · AIChE Journal · doi:10.1002/aic.15210 · Cited by 157
Self-citationBerry, B. N., Dobrowsky, T. M., Timson, R. C., Kshirsagar, R., Ryll, T., & Wiltberger, K. (2015) · Biotechnology Progress · doi:10.1002/btpr.2205 · Cited by 145
A Digital Twin-based Privacy Enhancement Mechanism for the Automotive Industry
Damjanović, V. (2018) · IEEE International Conference on Intelligent Systems · doi:10.1109/is.2018.8710526 · Cited by 143
Process performance and product quality in an integrated continuous antibody production process
Karst, D. J., Steinebach, F., Šoóš, M., & Morbidelli, M. (2016) · Biotechnology and Bioengineering · doi:10.1002/bit.26069 · Cited by 142
Implementation of Fully Integrated Continuous Antibody Processing: Effects on Productivity and COGm
Arnold, L., Lee, K. M. L., Pezzini, J., & Lee, J. H. (2018) · Biotechnology Journal · doi:10.1002/biot.201800061 · Cited by 139
Narayanan, H., Sokolov, M., Morbidelli, M., & Butté, A. (2019) · Biotechnology and Bioengineering · doi:10.1002/bit.27097 · Cited by 123
Body Sensor Network for Mobile Health Monitoring, a Diagnosis and Anticipating System
Wannenburg, J., & Malekian, R. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2015.2464773 · Cited by 122
Rogers, A. J., Hashemi, A., & Ierapetritou, M. (2013) · Processes · doi:10.3390/pr1020067 · Cited by 121
Self-citationProcess analysis and optimization of continuous pharmaceutical manufacturing using flowsheet models
Wang, Z., Escotet-Espinoza, M. S., & Ierapetritou, M. (2017) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2017.02.030 · Cited by 118
Self-citationStructural Health Management of Damaged Aircraft Structures Using Digital Twin Concept
Seshadri, B. R., & Krishnamurthy, T. (2017) · AIAA/AHS Adaptive Structures Conference · doi:10.2514/6.2017-1675 · Cited by 117
Hybrid modeling as a QbD/PAT tool in process development: an industrial E. coli case study
von Stosch, M., Hamelink, J., & Oliveira, R. (2016) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-016-1557-1 · Cited by 115
A Reconfigurable Modeling Approach for Digital Twin-based Manufacturing System
Zhang, C., Xu, W., Liu, J., Liu, Z., Zhou, Z., & Pham, D. T. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.03.141 · Cited by 115
Wu, H., White, M., & Khan, M. A. (2010) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2010.11.045 · Cited by 112
Self-Validating Inferential Sensors with Application to Air Emission Monitoring
Qin, S. J., Yue, H., & Dunia, R. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie960615y · Cited by 111
Comparison between Batch and Continuous Monoclonal Antibody Production and Economic Analysis
Yang, O., Prabhu, S., & Ierapetritou, M. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b04717 · Cited by 111
Self-citationBaur, D., Angarita, M., Müller‐Späth, T., & Morbidelli, M. (2015) · Biotechnology Journal · doi:10.1002/biot.201500223 · Cited by 110
Generic Raman‐based calibration models enabling real‐time monitoring of cell culture bioreactors
Mehdizadeh, H., Lauri, D., Karry, K. M., Moshgbar, M., Procopio‐Melino, R., & Drapeau, D. (2015) · Biotechnology Progress · doi:10.1002/btpr.2079 · Cited by 108
Zobel‐Roos, S., Schmidt, A., Mestmäcker, F., Mouellef, M., Huter, M. J., Uhlenbrock, L., Kornecki, M., Lohmann, L. J., Ditz, R., & Strube, J. (2019) · Processes · doi:10.3390/pr7020094 · Cited by 107
Singh, R., Sahay, A., Karry, K. M., Muzzio, F. J., Ierapetritou, M., & Ramachnadran, R. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.06.045 · Cited by 105
Self-citationGonzález, I., Calderón, A. J., Figueiredo, J., & Sousa, J. M. C. (2019) · Electronics · doi:10.3390/electronics8050510 · Cited by 103 · cited 1×
“OPC UA is considered to be the current standard as it has added features such as multiple tags along with their properties [36].”
BackgroundOptimizing amino acid composition of CHO cell culture media for a fusion protein production
Xing, Z., Kenty, B. M., Koyrakh, I., Borys, M., Pan, S., & Li, Z. J. (2011) · Process Biochemistry · doi:10.1016/j.procbio.2011.03.014 · Cited by 103
Smiatek, J., Jung, A., & Bluhmki, E. (2020) · Trends in biotechnology · doi:10.1016/j.tibtech.2020.05.008 · Cited by 100
Spahn, P. N., Hansen, A. H., Hansen, H. G., Arnsdorf, J., Kildegaard, H. F., & Lewis, N. E. (2015) · Metabolic Engineering · doi:10.1016/j.ymben.2015.10.007 · Cited by 99
Feidl, F., Vogg, S., Wolf, M., Podobnik, M., Ruggeri, C., Ulmer, N., Wälchli, R., Souquet, J., Broly, H., Butté, A., et al. (2020) · Biotechnology and Bioengineering · doi:10.1002/bit.27296 · Cited by 99
Singh, R., Sahay, A., Muzzio, F. J., et al. (2014) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2014.02.029 · Cited by 98
Concept drift in Streaming Data Classification: Algorithms, Platforms and Issues
Janardan, & Mehta, S. (2017) · Procedia Computer Science · doi:10.1016/j.procs.2017.11.440 · Cited by 94
Challenges with Structural Life Forecasting Using Realistic Mission Profiles
Gockel, B., Tudor, A., Brandyberry, M., Penmetsa, R., & Tuegel, E. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1813 · Cited by 91
Model-based optimization of antibody galactosylation in CHO cell culture
Kotidis, P., Jedrzejewski, P., Sou, S. N., Sellick, C., Polizzi, K., del Val, I. J., & Kontoravdi, C. (2019) · Biotechnology and Bioengineering · doi:10.1002/bit.26960 · Cited by 90
O’Connor, T. F., Yu, L. X., & Lee, S. L. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.05.058 · Cited by 85
Mini‐review: soft sensors as means for PAT in the manufacture of bio‐therapeutics
Mandenius, C., & Gustavsson, R. (2015) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.4477 · Cited by 84 · cited 1×
“Soft sensors are a combination of hardware sensors with their propriety software-enabled models that help obtain information about the process [38].”
BackgroundDetailed modeling and process design of an advanced continuous powder mixer
Toson, P., Siegmann, E., Trogrlić, M., Kureck, H., Khinast, J., Jajčević, D., Doshi, P., Blackwood, D. O., Bonnassieux, A., Daugherity, P. D., et al. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.09.032 · Cited by 83
Cyber-physical-based PAT (CPbPAT) framework for Pharma 4.0
Barenji, R. V., Akdağ, Y., Yet, B., & Öner, L. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.06.036 · Cited by 82
Digital Twin: Values, Challenges and Enablers
Rasheed, A., San, O., & Kvamsdal, T. (2019) · arXiv · doi:10.48550/arxiv.1910.01719 · Cited by 81
Advances in process monitoring tools for cell culture bioprocesses
Zhao, L., Fu, H., Zhou, W., & Hu, W. (2015) · Engineering in Life Sciences · doi:10.1002/elsc.201500006 · Cited by 81
Sokolov, M., Ritscher, J., MacKinnon, N., Souquet, J., Broly, H., Morbidelli, M., & Butté, A. (2017) · Biotechnology Progress · doi:10.1002/btpr.2502 · Cited by 80
Escotet-Espinoza, M. S., Moghtadernejad, S., Oka, S., Wang, Y., Román-Ospino, A. D., Schäfer, E., Cappuyns, P., Assche, I. V., Futran, M., Ierapetritou, M., et al. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.10.040 · Cited by 80
Self-citationReal time release testing of tablet content and content uniformity
Goodwin, D., van den Ban, S., Denham, M., & Barylski, I. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.12.011 · Cited by 79
Pirrung, S. M., van der Wielen, L. A. M., van Beckhoven, R. F. W. C., van de Sandt, E. J. A. X., Eppink, M. H. M., & Ottens, M. (2017) · Biotechnology Progress · doi:10.1002/btpr.2435 · Cited by 77
Baumann, P., & Hubbuch, J. J. (2016) · Engineering in Life Sciences · doi:10.1002/elsc.201600033 · Cited by 75
Mechanistic Modeling of Preparative Column Chromatography for Biotherapeutics
Kumar, V., & Lenhoff, A. M. (2020) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-102419-125430 · Cited by 75
Biopharmaceutical Process Optimization with Simulation and Scheduling Tools
Petrides, D. P., Carmichael, D., Siletti, C. A., & Koulouris, A. (2014) · Bioengineering · doi:10.3390/bioengineering1040154 · Cited by 74
Toward intelligent decision support for pharmaceutical product development
Zhao, C., Jain, A., Hailemariam, L., Suresh, P., Akkisetty, P. K., Joglekar, G. S., Venkatasubramanian, V., Reklaitis, G. V., Morris, K. R., & Basu, P. (2006) · Journal of Pharmaceutical Innovation · doi:10.1007/bf02784878 · Cited by 68
Controlling the time evolution of mAb N‐linked glycosylation ‐ Part II: Model‐based predictions
Villiger, T. K., Scibona, E., Stettler, M., Broly, H., Morbidelli, M., & Šoóš, M. (2016) · Biotechnology Progress · doi:10.1002/btpr.2315 · Cited by 66
Mechanistic modeling and applications for CHO cell culture development and production
Sha, S., Huang, Z., Wang, Z., & Yoon, S. (2018) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2018.08.010 · Cited by 66
Drilling Digital Twin Success Stories the Last 10 Years
Mayani, M. G., Svendsen, M., & Oedegaard, S. I. (2018) · SPE Bergen One Day Seminar · doi:10.2118/191336-ms · Cited by 64
Metta, N., Ghijs, M., Schäfer, E., et al. (2019) · Processes · doi:10.3390/pr7040234 · Cited by 64
Towards real-time monitoring of therapeutic protein quality in mammalian cell processes
Pais, D. A. M., Carrondo, M. J. T., Alves, P. M., & Teixeira, A. P. (2014) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2014.06.019 · Cited by 63
Sokolov, M., Morbidelli, M., Butté, A., Souquet, J., & Broly, H. (2017) · Biotechnology Journal · doi:10.1002/biot.201700461 · Cited by 63
Emergence of Digital Twins - Is this the march of reason?
Datta, S. (2017) · Journal of Innovation Management · doi:10.24840/2183-0606_005.003_0003 · Cited by 62
A generic hybrid model development for process analysis of industrial fixed-bed catalytic reactors
Azarpour, A., Borhani, T. N. G., Alwi, S. R. W., et al. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2016.10.024 · Cited by 59
Wang, G., Briskot, T., Hahn, T., Baumann, P., & Hubbuch, J. J. (2017) · Journal of Chromatography A · doi:10.1016/j.chroma.2017.01.068 · Cited by 59
Toward Biotherapeutic Product Real‐Time Quality Monitoring
Guerra, A., von Stosch, M., & Glassey, J. (2019) · Critical Reviews in Biotechnology · doi:10.1080/07388551.2018.1524362 · Cited by 58
Xu, J., Tang, P., Yongky, A., Drew, B., Borys, M., Liu, S., & Li, Z. J. (2018) · mAbs · doi:10.1080/19420862.2018.1525262 · Cited by 56
Challenges in Digital Twin Development for Cyber-Physical Production Systems
Park, H., Easwaran, A., & Andalam, S. (2019) · Lecture notes in computer science · doi:10.1007/978-3-030-23703-5_2 · Cited by 55
Model‐based design and control of a small‐scale integrated continuous end‐to‐end mAb platform
Gomis‐Fons, J., Schwarz, H., Zhang, L., Andersson, N., Nilsson, B., Castan, A., Solbrand, A., Stevenson, J., & Chotteau, V. (2020) · Biotechnology Progress · doi:10.1002/btpr.2995 · Cited by 55
Process integration and control in continuous bioprocessing
Rathore, A. S., Kateja, N., & Kumar, D. (2018) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2018.08.005 · Cited by 54
Escotet-Espinoza, M. S., Moghtadernejad, S., Oka, S., Wang, Z., Wang, Y., Román-Ospino, A. D., Schäfer, E., Cappuyns, P., Assche, I. V., Futran, M., et al. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.12.051 · Cited by 53
Self-citationAbu‐Absi, N. R., Martel, R. P., Lanza, A. M., Clements, S. J., Borys, M., & Li, Z. J. (2014) · Pharmaceutical Bioprocessing · doi:10.4155/pbp.14.24 · Cited by 52
Hutter, S., Villiger, T. K., Brühlmann, D., Stettler, M., Broly, H., Šoóš, M., & Gunawan, R. (2017) · Metabolic Engineering · doi:10.1016/j.ymben.2017.07.005 · Cited by 52
Working mode in aircraft manufacturing based on digital coordination model
Guo, F., Zou, F., Liu, J., & Wang, Z. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2048-0 · Cited by 51
Portela, R. M. C., Varsakelis, C., Richelle, A., Giannelos, N., Pence, J., Dessoy, S., & von Stosch, M. (2020) · Advances in biochemical engineering, biotechnology · doi:10.1007/10_2020_138 · Cited by 51
Laursen, S. Ö., Webb, D., & Ramirez, W. (2007) · Computers and Chemical Engineering · doi:10.1016/j.compchemeng.2006.05.018 · Cited by 49
Huter, M. J., & Strube, J. (2019) · Processes · doi:10.3390/pr7060317 · Cited by 49
Lopes, M. R., Costigliola, A., Pinto, R. M. A., Vieira, S. M., & Sousa, J. M. C. (2019) · International Journal of Production Research · doi:10.1080/00207543.2019.1683250 · Cited by 49
Meng, W., Román-Ospino, A. D., Panikar, S. S., O'Callaghan, C., Gilliam, S. J., Ramachnadran, R., & Muzzio, F. J. (2019) · Advanced Powder Technology · doi:10.1016/j.apt.2019.01.017 · Cited by 47
Data-driven soft sensor of downhole pressure for a gas-lift oil well
Teixeira, B. O. S., Castro, W. S., Teixeira, A. F., & Aguirre, L. A. (2013) · Control Engineering Practice · doi:10.1016/j.conengprac.2013.09.005 · Cited by 46
Prediction of dissolution profiles by non-destructive NIR spectroscopy in bilayer tablets
Baranwal, Y., Román-Ospino, A. D., Keyvan, G., Ha, J. M., Hong, E.-P., Muzzio, F. J., & Ramachnadran, R. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.05.022 · Cited by 46
Lohmann, L. J., & Strube, J. (2020) · Processes · doi:10.3390/pr8010058 · Cited by 46
Sou, S. N., Jedrzejewski, P. M., Lee, K., Sellick, C., Polizzi, K. M., & Kontoravdi, C. (2017) · Biotechnology and Bioengineering · doi:10.1002/bit.26225 · Cited by 45
On the model‐based optimization of secreting mammalian cell (GS‐NS0) cultures
Kiparissides, A., Pistikopoulos, E. N., & Mantalaris, A. (2014) · Biotechnology and Bioengineering · doi:10.1002/bit.25457 · Cited by 45
Use of a soft sensor for the fast estimation of dried cake resistance during a freeze-drying cycle
Bosca, S., Barresi, A., & Fissore, D. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.04.046 · Cited by 45
Borys, B. S., Roberts, E. L., Le, A., & Kallos, M. S. (2018) · Biochemical Engineering Journal · doi:10.1016/j.bej.2018.02.005 · Cited by 45
Dimensional Metrology of Cell-matrix Interactions in 3D Microscale Fibrous Substrates
Tourlomousis, F., & Chang, R. C. (2017) · Procedia CIRP · doi:10.1016/j.procir.2017.04.009 · Cited by 43
Soft sensor for continuous product quality estimation (in crude distillation unit)
Rogina, A., Šiško, I., Mohler, I., Andrijić, Ž. U., & Bolf, N. (2011) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2011.01.003 · Cited by 42
On-line monitoring of downstream bioprocesses
Roch, P., & Mandenius, C. (2016) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2016.09.007 · Cited by 41
Selvarasu, S., Kim, D. Y., Karimi, I. A., & Lee, D. (2010) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2010.07.016 · Cited by 40
Controlling the Glycosylation Profile in mAbs Using Time-Dependent Media Supplementation
Radhakrishnan, D., Robinson, A. S., & Ogunnaike, B. A. (2017) · Antibodies · doi:10.3390/antib7010001 · Cited by 40
Constrained global sensitivity analysis for bioprocess design space identification
Kotidis, P., Demis, P., Goey, C. H., Correa, E., McIntosh, C., Trepekli, S., Shah, N., Klymenko, O. V., & Kontoravdi, C. (2019) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2019.01.022 · Cited by 40
Schäfer, P. M., Caspari, A., Mhamdi, A., et al. (2019) · Journal of Process Control · doi:10.1016/j.jprocont.2019.10.008 · Cited by 40
Zalai, D., Koczka, K., Párta, L., Wechselberger, P., Klein, T., & Herwig, C. (2015) · Biotechnology Progress · doi:10.1002/btpr.2179 · Cited by 39
Escotet-Espinoza, M. S., Vadodaria, S., Singh, R., Muzzio, F. J., & Ierapetritou, M. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.03.036 · Cited by 39
Self-citationData fusion‐based assessment of raw materials in mammalian cell culture
Lee, H. W., Christie, A., Xu, J., & Yoon, S. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24548 · Cited by 37
Shirahata, H., Diab, S., Sugiyama, H., & Gerogiorgis, D. I. (2019) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2019.07.016 · Cited by 35
Badr, S., & Sugiyama, H. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.01.003 · Cited by 35
Zürcher, P., Sokolov, M., Brühlmann, D., Ducommun, R., Stettler, M., Souquet, J., Jordan, M., Broly, H., Morbidelli, M., & Butté, A. (2020) · Biotechnology Progress · doi:10.1002/btpr.3012 · Cited by 34
Development of a Computational Fluid Dynamics Model for Scaling-up Ambr Bioreactors
Li, X., Scott, K., Kelly, W., & Huang, Z. (2018) · Biotechnology and Bioprocess Engineering · doi:10.1007/s12257-018-0063-5 · Cited by 32
Fahey, W., Jeffers, P., & Carroll, P. (2020) · Computers in Industry · doi:10.1016/j.compind.2019.103153 · Cited by 32
Metta, N., Verstraeten, M., Ghijs, M., Kumar, A., Schafer, E., Singh, R., Beer, T. D., Ingmar Nopens, A., Cappuyns, P., Assche, I. V., et al. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.07.056 · Cited by 31
Self-citationSmart Process Manufacturing for Formulated Products
Litster, J. D., & Bogle, I. D. L. (2019) · Engineering · doi:10.1016/j.eng.2019.02.014 · Cited by 31
Chen, K., Castillo, I., Chiang, L. H., & Yu, J. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.09.005 · Cited by 30
Michels, J., Hare, K., Kulkarni, K. G., Zuzarte, C., Liu, Z. H., Hammerschmidt, B. C., & Zemke, F. (2018) · ACM SIGMOD Record · doi:10.1145/3299887.3299897 · Cited by 28
Cao, H., Mushnoori, S., Higgins, B., Kollipara, C., Fermier, A. M., Hausner, D. B., Jha, S., Singh, R., Ierapetritou, M., & Ramachnadran, R. (2018) · Processes · doi:10.3390/pr6050053 · Cited by 27
Self-citationKinetic modeling of Chinese hamster ovary cell culture: factors and principles
Tang, P., Xu, J., Louey, A., Tan, Z., Yongky, A., Liang, S., Li, Z. J., Weng, Y., & Liu, S. (2020) · Critical Reviews in Biotechnology · doi:10.1080/07388551.2019.1711015 · Cited by 27
Insight into the large‐scale upstream fermentation environment using scaled‐down models
Olughu, W., Deepika, G., Hewitt, C. J., & Rielly, C. D. (2018) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.5804 · Cited by 25
Menshutina, N. V., Guseva, E., Рафигович, С. Р., & Boudrant, J. (2019) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-019-02249-9 · Cited by 21
Herold, S., & King, R. (2013) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-013-1100-6 · Cited by 20
Prakash, A., Chaudhury, A., Barrasso, D., & Ramachnadran, R. (2013) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2013.01.017 · Cited by 20
Surrogate-based Optimization for Pharmaceutical Manufacturing Processes
Wang, Z., Escotet-Espinoza, M. S., Singh, R., & Ierapetritou, M. (2017) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/b978-0-444-63965-3.50468-2 · Cited by 20
Self-citationFarzan, P., & Ierapetritou, M. (2018) · Processes · doi:10.3390/pr6070082 · Cited by 19
Self-citationComputational Modeling of Fed-Batch Cell Culture Bioreactor: Hybrid Agent-Based Approach
Bayrak, E. S., Wang, T., Çınar, A., & Ündey, C. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.09.140 · Cited by 17
Metaheuristic approaches in biopharmaceutical process development data analysis
Gangadharan, N., Turner, R., Field, R. P., Oliver, S. G., Slater, N. K. H., & Dikicioǧlu, D. (2019) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-019-02147-0 · Cited by 16
Data mining algorithm for pre-processing biopharmaceutical drug product manufacturing records
Casola, G., Siegmund, C., Mattern, M., & Sugiyama, H. (2018) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2018.12.001 · Cited by 15
Recent Industrial Roadmaps to Enable Smart Manufacturing of Biopharmaceuticals
Lin‐Gibson, S., & Srinivasan, V. (2019) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2019.2951018 · Cited by 14
Perspective on PSE in pharmaceutical process development and innovation
Papadakis, E., Woodley, J. M., & Gani, R. (2018) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/b978-0-444-63963-9.00024-5 · Cited by 13
Iterative modeling and optimization of biomass production using experimental feedback
Luna, M. F., & Martinez, E. C. (2017) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2017.04.020 · Cited by 12
Agarwal, N., Mason, A., Pradhan, R., Kemper, J. M., Bosley, A. D., Serfiotis-Mitsa, D., Wang, J., Lindo, V., Ahuja, S., Hatton, D., et al. (2019) · Biotechnology Progress · doi:10.1002/btpr.2865 · Cited by 10
Subramanian, B. (2012) · Journal of Medical Marketing Device Diagnostic and Pharmaceutical Marketing · doi:10.1177/1745790412450171 · Cited by 9
Model-based optimization of integrated purification sequences for biopharmaceuticals
Pirrung, S. M., Berends, C., Backx, A. H., van Beckhoven, R. F. W. C., Eppink, M. H. M., & Ottens, M. (2019) · Chemical Engineering Science X · doi:10.1016/j.cesx.2019.100025 · Cited by 9
Soft sensor for better control of carbon dioxide removal process in ethylene glycol plant
Khalfe, N. M., Lahiri, K., & Sawke, K. (2010) · Chemical Industry and Chemical Engineering Quarterly · doi:10.2298/ciceq100122045k · Cited by 6
Ding, J., Qu, L.-L., Hu, X., et al. (2011) · Journal of Iron and Steel Research International · doi:10.1016/s1006-706x(11)60032-0 · Cited by 5
Flåten, G. R. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-811065-2.00013-8 · Cited by 3
Cited by
Digital twins-based smart manufacturing system design in Industry 4.0: A review
Leng, J., Wang, D., Shen, W., Li, X., Liu, Q., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.011 · Cited by 766
Digital twin in healthcare: Recent updates and challenges
Sun, T., He, X., & Li, Z. (2023) · DIGITAL HEALTH · doi:10.1177/20552076221149651 · Cited by 409
Deep learning in drug discovery: an integrative review and future challenges
Askr, H., Elgeldawi, E., Aboul Ella, H., Elshaier, Y. A. M. M., Gomaa, M. M., & Hassanien, A. E. (2023) · Artificial Intelligence Review · doi:10.1007/s10462-022-10306-1 · Cited by 390
Digital twin for smart manufacturing, A review
Soori, M., Arezoo, B., & Dastres, R. (2023) · Sustainable Manufacturing and Service Economics · doi:10.1016/j.smse.2023.100017 · Cited by 326
Palaniappan, K., Lin, E. Y. T., & Vogel, S. (2024) · Healthcare · doi:10.3390/healthcare12050562 · Cited by 301
Metadata
- Authors
- Chen, Y., Yang, O., Sampat, C., Bhalode, P., Ramachandran, R., & Ierapetritou, M.
- Venue
- Processes
- Publisher
- MDPI AG
- Published
- 2020-09-02
- Volume
- 8
- Issue
- 9
- Pages
- 1088
- ISSN
- 2227-9717 (ISSN-L)
- OpenAlex
- W3081679370
- Cited by
- 278
- References
- 187
- FWCI
- 16.78
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.