The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Nanoarchitectured Graphene/CNT@Porous Carbon with Extraordinary Electrical Conductivity and Interconnected Micro/Mesopores for Lithium‐Sulfur Batteries
Abstract
The sp 2‐hybridized nanocarbon (e.g., carbon nanotubes (CNTs) and graphene) exhibits extraordinary mechanical strength and electrical conductivity but limited external accessible surface area and a small amount of pores, while nanostructured porous carbon affords a huge surface area and abundant pore structures but very poor electrical conductance. Herein the rational hybridization of the sp 2 nanocarbon and nanostructured porous carbon into hierarchical all‐carbon nanoarchitectures is demonstrated, with full inherited advantages of the component materials. The sp 2 graphene/CNT interlinked networks give the composites good electrical conductivity and a robust framework, while the meso‐/microporous carbon and the interlamellar compartment between the opposite graphene accommodate sulfur and polysulfides. The strong confinement induced by micro‐/mesopores of all‐carbon nanoarchitectures renders the transformation of S 8 crystal into amorphous cyclo‐S 8 molecular clusters, restraining the shuttle phenomenon for high capacity retention of a lithium‐sulfur cell. Therefore, the composite cathode with an ultrahigh specific capacity of 1121 mAh g−1 at 0.5 C, a favorable high‐rate capability of 809 mAh g−1 at 10 C, a very low capacity decay of 0.12% per cycle, and an impressive cycling stability of 877 mAh g−1 after 150 cycles at 1 C. As sulfur loading increases from 50 wt% to 77 wt%, high capacities of 970, 914, and 613 mAh g−1 are still available at current densities of 0.5, 1, and 5 C, respectively. Based on the total mass of packaged devices, gravimetric energy density of GSH@APC‐S//Li cell is expected to be 400 Wh kg−1 at a power density of 10 000 W kg−1, matching the level of engine driven systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Carbon-Based Supercapacitors Produced by Activation of Graphene
Zhu, Y., Murali, S., Stoller, M. D., Ganesh, K. J., Cai, W., Ferreira, P. J., Pirkle, A., Wallace, R. M., Cychosz, K. A., Thommes, M., et al. (2011) · Science · doi:10.1126/science.1200770 · Cited by 6,140
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Advanced Materials for Energy Storage
Liu, C., Li, F., Ma, L., & Cheng, H. (2010) · Advanced Materials · doi:10.1002/adma.200903328 · Cited by 4,765
Carbon materials for chemical capacitive energy storage
Zhai, Y., Dou, Y., Zhao, D., Fulvio, P. F., Mayes, R. T., & Dai, S. (2011) · Advanced Materials · doi:10.1002/adma.201100984 · Cited by 2,964
KOH activation of carbon-based materials for energy storage
Wang, J., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34066f · Cited by 2,726
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Cited by
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Self-citationLithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Self-citationAmine‐Assisted Delamination of Nb2C MXene for Li‐Ion Energy Storage Devices
Mashtalir, O., Lukatskaya, M. R., Zhao, M., Barsoum, M. W., & Gogotsi, Y. (2015) · Advanced Materials · doi:10.1002/adma.201500604 · Cited by 954
Self-citationLin, H., Yang, L., Jiang, X., Li, G., Zhang, T., Yao, Q., Zheng, G. W., & Lee, J. Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01047h · Cited by 952
Huang, J.-Q., Zhuang, T.-Z., Zhang, Q., Peng, H.-J., Chen, C.-M., & Wei, F. (2015) · ACS Nano · doi:10.1021/nn507178a · Cited by 809
Self-citationBiomass derived carbon for energy storage devices
Wang, J., Nie, P., Ding, B., Dong, S., Hao, X., Dou, H., & Zhang, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08742f · Cited by 809
Hou, T.-Z., Chen, X., Peng, H.-J., Huang, J.-Q., Li, B.-Q., Zhang, Q., & Li, B. (2016) · Small · doi:10.1002/smll.201600809 · Cited by 789
Self-citationPang, Q., Tang, J., Huang, H., Liang, X., Hart, C., Tam, K. C., & Nazar, L. F. (2015) · Advanced Materials · doi:10.1002/adma.201502467 · Cited by 780
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Self-citationHuang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Self-citationCurrent Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Carbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
Song, J., Yu, Z., Gordin, M. L., & Wang, D. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03217 · Cited by 561
Jiang, H., Ren, D., Wang, H., Hu, Y., Guo, S., Yuan, H., Hu, P., Zhang, L., & Li, C. (2015) · Advanced Materials · doi:10.1002/adma.201501059 · Cited by 558
Graphene-based composites for electrochemical energy storage
Wang, B., Ruan, T., Chen, Y., Jin, F., Peng, L., Zhou, Y., Wang, D., & Dou, S. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.08.004 · Cited by 530
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Nanostructured energy materials for electrochemical energy conversion and storage: A review
Zhang, X., Cheng, X., & Zhang, Q. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.11.003 · Cited by 516
Self-citationZhou, G., Zhao, Y., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402263 · Cited by 502
A review on the status and challenges of electrocatalysts in lithium-sulfur batteries
He, J., & Manthiram, A. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.04.038 · Cited by 479
Progress on the Critical Parameters for Lithium–Sulfur Batteries to be Practically Viable
Chung, S., Chang, C., & Manthiram, A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801188 · Cited by 477
Zhang, Z., Kong, L., Liu, S., Li, G., & Gao, X. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602543 · Cited by 472
Carbon-based metal-free electrocatalysts: from oxygen reduction to multifunctional electrocatalysis
Hu, C., Paul, R., Dai, Q., & Dai, L. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00219h · Cited by 457
Chen, X., Hou, T., Persson, K. A., & Zhang, Q. (2019) · Materials Today · doi:10.1016/j.mattod.2018.04.007 · Cited by 446
Self-citationRational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
Li, Z., Huang, Y., Yuan, L., Hao, Z., & Huang, Y. (2015) · Carbon · doi:10.1016/j.carbon.2015.03.008 · Cited by 429
Zhong, Y., Chao, D., Deng, S., Zhan, J., Fang, R., Xia, Y., Wang, Y., Wang, X., Xia, X., & Tu, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706391 · Cited by 428
Cheng, Y., Huang, L., Xiao, X., Yao, B., Yuan, L., Li, T., Hu, Z., Wang, B., Wan, J., & Zhou, J. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.007 · Cited by 423
A Comprehensive Understanding of Lithium–Sulfur Battery Technology
Li, T., Bai, X., Gulzar, U., Bai, Y., Capiglia, C., Deng, W., Zhou, X., Liu, Z., Feng, Z., & Proietti Zaccaria, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901730 · Cited by 422
Carbon Materials for Lithium Sulfur Batteries—Ten Critical Questions
Borchardt, L., Oschatz, M., & Kaskel, S. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201600040 · Cited by 414
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Zhao, Y., Wu, W., Li, J., Xu, Z., & Guan, L. (2014) · Advanced Materials · doi:10.1002/adma.201401191 · Cited by 404
Lithium–sulfur batteries: from liquid to solid cells
Lin, Z., & Liang, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04727c · Cited by 399
Cheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
Self-citationPeng, H., Hou, T., Zhang, Q., Huang, J., Cheng, X., Guo, M., Yuan, Z., He, L., & Wei, F. (2014) · Advanced Materials Interfaces · doi:10.1002/admi.201400227 · Cited by 393
Self-citationA review of recent developments in rechargeable lithium–sulfur batteries
Kang, W., Deng, N., Ju, J., Li, Q., Wu, D., Ma, X., Li, L., Naebe, M., & Cheng, B. (2016) · Nanoscale · doi:10.1039/c6nr04923k · Cited by 391
Tang, C., Li, B., Zhang, Q., Zhu, L., Wang, H., Shi, J., & Wei, F. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503726 · Cited by 388
Self-citationGraphene‐Based Nanocomposites for Energy Storage
Ji, L., Meduri, P., Agubra, V., Xiao, X., & Alcoutlabi, M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502159 · Cited by 385
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Self-citationPeng, H., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500268 · Cited by 348
Self-citationA Revolution in Electrodes: Recent Progress in Rechargeable Lithium–Sulfur Batteries
Fang, X., & Peng, H. (2015) · Small · doi:10.1002/smll.201402354 · Cited by 346
Self-citationZhuang, T., Huang, J., Peng, H., He, L., Cheng, X., Chen, C., & Zhang, Q. (2016) · Small · doi:10.1002/smll.201503133 · Cited by 346
Self-citationAdvanced nanostructured carbon-based materials for rechargeable lithium-sulfur batteries
Zhang, L., Wang, Y., Niu, Z., & Chen, J. (2019) · Carbon · doi:10.1016/j.carbon.2018.09.067 · Cited by 343
Chen, K., Sun, Z., Fang, R., Shi, Y., Cheng, H., & Li, F. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707592 · Cited by 339
MXene‐Based Composites: Synthesis and Applications in Rechargeable Batteries and Supercapacitors
Yang, J., Bao, W., Jaumaux, P., Zhang, S., Wang, C., & Wang, G. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201802004 · Cited by 331
Chen, X., Peng, H.-J., Zhang, R., Hou, T.-Z., Huang, J.-Q., Li, B., & Zhang, Q. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00164 · Cited by 325
Self-citationThe recent progress of nitrogen-doped carbon nanomaterials for electrochemical batteries
Wu, J., Pan, Z., Zhang, Y., Wang, B., & Peng, H. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03968b · Cited by 318
Self-citationPaul, R., Du, F., Dai, L., Ding, Y., Wang, Z. L., Wei, F., & Roy, A. (2019) · Advanced Materials · doi:10.1002/adma.201805598 · Cited by 313
Self-citationCarbon nanotube-based materials for lithium–sulfur batteries
Zheng, M., Chi, Y., Hu, Q., Tang, H., Jiang, X., Zhang, L., Zhang, S., Pang, H., & Xu, Q. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05347f · Cited by 311
Cathode materials for lithium–sulfur batteries: a practical perspective
Eftekhari, A., & Kim, D.-W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00799j · Cited by 285
Zeng, L., Zeng, W., Jiang, Y., Wei, X., Li, W., Yang, C., Zhu, Y., & Yu, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401377 · Cited by 285
Chung, S., Han, P., Singhal, R., Kalra, V., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500738 · Cited by 280
12 years roadmap of the sulfur cathode for lithium sulfur batteries (2009–2020)
Liu, T., Hu, H., Ding, X., Yuan, H., Jin, C., Nai, J., Liu, Y., Wang, Y., Wan, Y., & Tao, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.05.023 · Cited by 278
Engineering Strategies for Suppressing the Shuttle Effect in Lithium–Sulfur Batteries
Li, J., Gao, L., Pan, F., Gong, C., Sun, L., Gao, H., Zhang, J., Zhao, Y., Wang, G., & Liu, H. (2024) · Nano-Micro Letters · doi:10.1007/s40820-023-01223-1 · Cited by 267
Ternary Hybrid Material for High-Performance Lithium–Sulfur Battery
Fan, Q., Liu, W., Weng, Z., Sun, Y., & Wang, H. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b07071 · Cited by 264
A Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Self-citationRecent Advances in Energy Chemical Engineering of Next-Generation Lithium Batteries
Zhang, X.-Q., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2018) · Engineering · doi:10.1016/j.eng.2018.10.008 · Cited by 259
Self-citationYan, J., Wang, Q., Lin, C., Wei, T., & Fan, Z. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400500 · Cited by 255
Yan, C., Cheng, X.-B., Zhao, C.-Z., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.056 · Cited by 255
Self-citationPolymer electrolytes and interfaces toward solid-state batteries: Recent advances and prospects
Wu, F., Zhang, K., Liu, Y., Gao, H., Bai, Y., Wang, X., & Wu, C. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.08.002 · Cited by 255
Zhao, C., Yu, C., Liu, S., Yang, J., Fan, X., Huang, H., & Qiu, J. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503077 · Cited by 254
Xiang, Y., Lu, L., Kottapalli, A. G. P., & Pei, Y. (2022) · Carbon Energy · doi:10.1002/cey2.185 · Cited by 253
Qiu, S., Xing, W., Mu, X., Feng, X., Ma, C., Yuen, R. K. K., & Hu, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11101 · Cited by 58
Metadata
- Authors
- Peng, H., Huang, J., Zhao, M., Zhang, Q., Cheng, X., Liu, X., Qian, W., & Wei, F.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2014-01-30
- Volume
- 24
- Issue
- 19
- Pages
- 2772-2781
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2022558116
- Cited by
- 552
- References
- 47
- FWCI
- 41.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.