The DOI matches its Crossref record; 87 of the 87 references it cites were found in a registry or an index.
Anode Improvement in Rechargeable Lithium–Sulfur Batteries
Open accessAbstract
Owing to their theoretical energy density of 2600 Wh kg−1, lithium–sulfur batteries represent a promising future energy storage device to power electric vehicles. However, the practical applications of lithium–sulfur batteries suffer from poor cycle life and low Coulombic efficiency, which is attributed, in part, to the polysulfide shuttle and Li dendrite formation. Suppressing Li dendrite growth, blocking the unfavorable reaction between soluble polysulfides and Li, and improving the safety of Li–S batteries have become very important for the development of high‐performance lithium sulfur batteries. A comprehensive review of various strategies is presented for enhancing the stability of the anode of lithium sulfur batteries, including inserting an interlayer, modifying the separator and electrolytes, employing artificial protection layers, and alternative anodes to replace the Li metal anode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Metal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Lithium sulfur batteries, a mechanistic review
Wild, M., O'Neill, L., Zhang, T., Purkayastha, R., Minton, G., Marinescu, M., & Offer, G. J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01388g · Cited by 1,107
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Liang, Z., Lin, D., Zhao, J., Lu, Z., Liu, Y., Liu, C., Lu, Y., Wang, H., Yan, K., Tao, X., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1518188113 · Cited by 846
Carbon–sulfur composites for Li–S batteries: status and prospects
Wang, D.-W., Zeng, Q., Zhou, G., Yin, L., Li, F., Cheng, H.-M., Gentle, I. R., & Lu, G. Q. M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11045a · Cited by 816
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
Su, Y.-S., & Manthiram, A. (2012) · Chemical Communications · doi:10.1039/c2cc33945e · Cited by 755
Yan, K., Lee, H.-W., Gao, T., Zheng, G., Yao, H., Wang, H., Lu, Z., Zhou, Y., Liang, Z., Liu, Z., et al. (2014) · Nano Letters · doi:10.1021/nl503125u · Cited by 742
Zhang, R., Cheng, X., Zhao, C., Peng, H., Shi, J., Huang, J., Wang, J., Wei, F., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201504117 · Cited by 686
Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries
Huang, J.-Q., Zhang, Q., Peng, H.-J., Liu, X.-Y., Qian, W.-Z., & Wei, F. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42223b · Cited by 679
New Nanostructured Li2S/Silicon Rechargeable Battery with High Specific Energy
Yang, Y., McDowell, M. T., Jackson, A., Cha, J. J., Hong, S. S., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl100504q · Cited by 653
A Flexible Sulfur‐Graphene‐Polypropylene Separator Integrated Electrode for Advanced Li–S Batteries
Zhou, G., Li, L., Wang, D., Shan, X., Pei, S., Li, F., & Cheng, H. (2015) · Advanced Materials · doi:10.1002/adma.201404210 · Cited by 590
Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes
Liang, Z., Zheng, G., Liu, C., Liu, N., Li, W., Yan, K., Yao, H., Hsu, P.-C., Chu, S., & Cui, Y. (2015) · Nano Letters · doi:10.1021/nl5046318 · Cited by 540
Yao, H., Yan, K., Li, W., Zheng, G., Kong, D., Seh, Z. W., Narasimhan, V. K., Liang, Z., & Cui, Y. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01377h · Cited by 526
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Recent progress and remaining challenges in sulfur-based lithium secondary batteries – a review
Bresser, D., Passerini, S., & Scrosati, B. (2013) · Chemical Communications · doi:10.1039/c3cc46131a · Cited by 514
Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte
Liang, X. M., Wen, Z., Liu, Y., Wu, M., Jin, J. H., Zhang, H., & Wu, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.027 · Cited by 506
Anodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
Stabilizing lithium metal using ionic liquids for long-lived batteries
Basile, A., Bhatt, A. I., & O’Mullane, A. P. (2016) · Nature Communications · doi:10.1038/ncomms11794 · Cited by 467
Novel gel polymer electrolyte for high-performance lithium–sulfur batteries
Liu, M., Zhou, D., He, Y.-B., Fu, Y., Qin, X., Miao, C., Du, H., Li, B., Yang, Q.-H., Lin, Z., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.008 · Cited by 465
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
A High‐Performance Polymer Tin Sulfur Lithium Ion Battery
Hassoun, J., & Scrosati, B. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907324 · Cited by 433
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
Al2O3-coated porous separator for enhanced electrochemical performance of lithium sulfur batteries
Zhang, Z., Lai, Y., Zhang, Z., Zhang, K., & Li, J. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.02.077 · Cited by 418
Hassoun, J., & Scrosati, B. (2010) · Advanced Materials · doi:10.1002/adma.201002584 · Cited by 415
Cheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
A lithium anode protection guided highly-stable lithium–sulfur battery
Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382
A Thermally Conductive Separator for Stable Li Metal Anodes
Luo, W., Zhou, L., Fu, K., Yang, Z., Wan, J., Manno, M., Yao, Y., Zhu, H., Yang, B., & Hu, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02432 · Cited by 356
A Revolution in Electrodes: Recent Progress in Rechargeable Lithium–Sulfur Batteries
Fang, X., & Peng, H. (2015) · Small · doi:10.1002/smll.201402354 · Cited by 346
Manipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
Improved dischargeability and reversibility of sulfur cathode in a novel ionic liquid electrolyte
Yuan, L. X., Feng, J. K., Ai, X. P., Cao, Y. L., Chen, S. L., & Yang, H. X. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.02.007 · Cited by 336
All-solid-state Li/S batteries with highly conductive glass–ceramic electrolytes
Hayashi, A., Ohtomo, T., Mizuno, F., Tadanaga, K., & Tatsumisago, M. (2003) · Electrochemistry Communications · doi:10.1016/s1388-2481(03)00167-x · Cited by 312
Graphite-Encapsulated Li-Metal Hybrid Anodes for High-Capacity Li Batteries
Sun, Y., Zheng, G., Seh, Z. W., Liu, N., Wang, S., Sun, J., Lee, H. R., & Cui, Y. (2016) · Chem · doi:10.1016/j.chempr.2016.07.009 · Cited by 305
High performance lithium–sulfur batteries: advances and challenges
Xu, G., Ding, B., Pan, J., Nie, P., Shen, L., & Zhang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02097a · Cited by 297
Reduced graphene oxide film as a shuttle-inhibiting interlayer in a lithium–sulfur battery
Wang, X., Wang, Z., & Chen, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.063 · Cited by 274
Ionic liquid-enhanced solid state electrolyte interface (SEI) for lithium–sulfur batteries
Zheng, J., Gu, M., Chen, H., Meduri, P., Engelhard, M. H., Zhang, J.-G., Liu, J., & Xiao, J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11553d · Cited by 255
Kim, H., Wu, F., Lee, J. T., Nitta, N., Lin, H., Oschatz, M., Cho, W. I., Kaskel, S., Borodin, O., & Yushin, G. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401792 · Cited by 240
An Aqueous Rechargeable Lithium Battery Using Coated Li Metal as Anode
Wang, X., Hou, Y., Zhu, Y., Wu, Y., & Holze, R. (2013) · Scientific Reports · doi:10.1038/srep01401 · Cited by 235
A Lithium‐Sulfur Battery with a High Areal Energy Density
Kim, J., Hwang, T. H., Kim, B. G., Min, J., & Choi, J. W. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400935 · Cited by 230
In Situ Formed Lithium Sulfide/Microporous Carbon Cathodes for Lithium-Ion Batteries
Zheng, S., Chen, Y., Xu, Y., Yi, F., Zhu, Y., Liu, Y., Yang, J., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn404601h · Cited by 230
Self-citationElectrochemical performance of lithium/sulfur batteries with protected Li anodes
Lee, Y. M., Choi, N.-S., Park, J. H., & Park, J.-K. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00300-8 · Cited by 223
Yamada, T., Ito, S., Omoda, R., Watanabe, T., Aihara, Y., Agostini, M., Ulissi, U., Hassoun, J., & Scrosati, B. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0441504jes · Cited by 217
V2O5 Polysulfide Anion Barrier for Long-Lived Li–S Batteries
Li, W., Hicks-Garner, J., Wang, J., Liu, J., Gross, A. F., Sherman, E., Graetz, J., Vajo, J. J., & Liu, P. (2014) · Chemistry of Materials · doi:10.1021/cm500575q · Cited by 217
Understanding glass fiber membrane used as a novel separator for lithium–sulfur batteries
Zhu, J., Yanilmaz, M., Fu, K., Chen, C., Lu, Y., Ge, Y., Kim, D., & Zhang, X. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.01.020 · Cited by 206
Chang, C.-H., Chung, S.-H., & Manthiram, A. (2016) · Small · doi:10.1002/smll.201502505 · Cited by 194
Coated Lithium Powder (CLiP) Electrodes for Lithium‐Metal Batteries
Heine, J., Krüger, S., Hartnig, C., Wietelmann, U., Winter, M., & Bieker, P. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300815 · Cited by 192
Jeong, S. S., Lim, Y. T., Choi, Y. J., Cho, G. B., Kim, K. W., Ahn, H. J., & Cho, K. K. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.108 · Cited by 184
Role of Polysulfides in Self‐Healing Lithium–Sulfur Batteries
Xu, R., Belharouak, I., Li, J. C. M., Zhang, X., Bloom, I., & Bareño, J. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200990 · Cited by 184
Carbon‐Based Anodes for Lithium Sulfur Full Cells with High Cycle Stability
Brückner, J., Thieme, S., Böttger‐Hiller, F., Bauer, I., Grossmann, H. T., Strubel, P., Althues, H., Spange, S., & Kaskel, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302169 · Cited by 184
Ma, G., Wen, Z., Wang, Q., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.141 · Cited by 172
Improved cycle stability and high security of Li-B alloy anode for lithium–sulfur battery
Zhang, X., Wang, W., Wang, A., Huang, Y., Yuan, K., Yu, Z., Qiu, J., & Yang, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta01709a · Cited by 168
Stabilized Lithium–Metal Surface in a Polysulfide-Rich Environment of Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501352e · Cited by 164
Hassoun, J., Kim, J., Lee, D.-J., Jung, H.-G., Lee, S.-M., Sun, Y.-K., & Scrosati, B. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.11.060 · Cited by 159
Xie, K., Wei, W., Yuan, K., Lu, W., Guo, M., Li, Z., Song, Q., Liu, X., Wang, J.-G., & Shen, C. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09031 · Cited by 158
Ma, Z., Li, Z., Hu, K., Liu, D., Huo, J., & Wang, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.139 · Cited by 152
Rechargeable lithium sulfide electrode for a polymer tin/sulfur lithium-ion battery
Hassoun, J., Sun, Y., & Scrosati, B. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.093 · Cited by 148
Zhang, A., Fang, X., Shen, C., Liu, Y., & Zhou, C. (2016) · Nano Research · doi:10.1007/s12274-016-1219-2 · Cited by 145
Enhanced cycle performance of Li–S battery with a polypyrrole functional interlayer
Ma, G., Wen, Z., Jin, J. H., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.057 · Cited by 139
Agostini, M., Hassoun, J., Liu, J., Jeong, M., Nara, H., Momma, T., Ōsaka, T., Sun, Y., & Scrosati, B. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4057166 · Cited by 137
Wang, L., Yang, Z., Nie, H., Gu, C., Hua, W., Xu, X., Chen, X., Chen, Y. I., & Huang, S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07027b · Cited by 133
Self-citationWang, J., Yang, Y., & Kang, F. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.04.055 · Cited by 129
Balach, J., Jaumann, T., Klose, M., Oswald, S., Eckert, J., & Giebeler, L. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.018 · Cited by 129
Xiong, S., Xie, K., Blomberg, E., Jacobsson, P., & Matic, A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.119 · Cited by 127
Systematic Effect for an Ultralong Cycle Lithium–Sulfur Battery
Wu, F., Ye, Y., Chen, R., Qian, J., Zhao, T., Li, L., & Li, W. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02864 · Cited by 116
Barghamadi, M., Best, A. S., Bhatt, A. I., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.150 · Cited by 110
Zhou, X., Liao, Q., Tang, J., Bai, T., Chen, F., & Yang, J. (2016) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2016.02.037 · Cited by 86
Krause, A., Dörfler, S., Piwko, M., Wisser, F. M., Jaumann, T., Ahrens, E., Giebeler, L., Althues, H., Schädlich, S., Grothe, J., et al. (2016) · Scientific Reports · doi:10.1038/srep27982 · Cited by 85
High performance lithium-sulfur batteries with a facile and effective dual functional separator
Hao, Z., Yuan, L., Li, Z., Liu, J., Xiang, J., Wu, C., Zeng, R., & Huang, Y. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.03.166 · Cited by 78
Wang, Q., Wen, Z., Yang, J., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.109 · Cited by 70
Few-Layer Graphene Island Seeding for Dendrite-Free Li Metal Electrodes
Kang, H.-K., Woo, S., Kim, J., Yu, J., Lee, S.-R., & Kim, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09757 · Cited by 68
Effective Separation of Lithium Anode and Sulfur Cathode in Lithium–Sulfur Batteries
Vižintin, A., Patel, M. U. M., Genorio, B., et al. (2014) · ChemElectroChem · doi:10.1002/celc.201402039 · Cited by 66
Wang, Z., Zhang, J., Yang, Y., Yue, X., Hao, X., Sun, W., Rooney, D. W., & Sun, K. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.087 · Cited by 54
The enhanced performance of Li–S battery with P14YRTFSI-modified electrolyte
Ma, G., Wen, Z., Jin, J. H., Wu, M., Zhang, G., Wu, X., & Zhang, J. (2013) · Solid State Ionics · doi:10.1016/j.ssi.2013.10.012 · Cited by 43
Fabrication of a nano-Li + -channel interlayer for high performance Li–S battery application
Yan, N. J., Yang, X., Zhou, W., Zhang, H., Li, X., & Zhang, H. (2015) · RSC Advances · doi:10.1039/c5ra01269d · Cited by 32
Cited by
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Self-citationAdvanced Nanocellulose‐Based Composites for Flexible Functional Energy Storage Devices
Xu, T., Du, H., Liu, H., Liu, W., Zhang, X., Si, C., Liu, P., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202101368 · Cited by 696
Artificial Soft–Rigid Protective Layer for Dendrite‐Free Lithium Metal Anode
Xu, R., Zhang, X., Cheng, X., Peng, H., Zhao, C., Yan, C., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705838 · Cited by 670
Beyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Yuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802768 · Cited by 626
Metadata
- Authors
- Tao, T., Lu, S., Fan, Y., Lei, W., Huang, S., & Chen, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-06-19
- Volume
- 29
- Issue
- 48
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2626709459
- Cited by
- 304
- References
- 87
- FWCI
- 14.10
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.