The DOI matches its Crossref record; 142 of the 142 references it cites were found in a registry or an index.
Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Open accessAbstract
High‐energy lithium‐metal batteries are among the most promising candidates for next‐generation energy storage systems. With a high specific capacity and a low reduction potential, the Li‐metal anode has attracted extensive interest for decades. Dendritic Li formation, uncontrolled interfacial reactions, and huge volume effect are major hurdles to the commercial application of Li‐metal anodes. Recent studies have shown that the performance and safety of Li‐metal anodes can be significantly improved via organic electrolyte modification, Li‐metal interface protection, Li‐electrode framework design, separator coating, and so on. Superior to the liquid electrolytes, solid‐state electrolytes are considered able to inhibit problematic Li dendrites and build safe solid Li‐metal batteries. Inspired by the bright prospects of solid Li‐metal batteries, increasing efforts have been devoted to overcoming the obstacles of solid Li‐metal batteries, such as low ionic conductivity of the electrolyte and Li–electrolyte interfacial problems. Here, the approaches to protect Li‐metal anodes from liquid batteries to solid‐state batteries are outlined and analyzed in detail. Perspectives regarding the strategies for developing Li‐metal anodes are discussed to facilitate the practical application of Li‐metal batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Self-citationLithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Ionic-liquid materials for the electrochemical challenges of the future
Armand, M., Endres, F., MacFarlane, D. R., Ohno, H., & Scrosati, B. (2009) · Nature Materials · doi:10.1038/nmat2448 · Cited by 4,619
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Cited by
Automotive Li-Ion Batteries: Current Status and Future Perspectives
Ding, Y., Cano, Z. P., Yu, A., Lu, J., & Chen, Z. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0022-z · Cited by 1,370
Gao, Z., Sun, H., Fu, L., Ye, F., Zhang, Y., Luo, W., & Huang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705702 · Cited by 1,300
Self-citationRecent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries
Fan, L., Wei, S., Li, S., Li, Q., & Lu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702657 · Cited by 1,179
Thick Electrode Batteries: Principles, Opportunities, and Challenges
Kuang, Y., Chen, C., Kirsch, D., & Hu, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901457 · Cited by 842
Self-citationProgress and Perspective of Ceramic/Polymer Composite Solid Electrolytes for Lithium Batteries
Li, S., Zhang, S., Shen, L., Liu, Q., Ma, J., Lv, W., He, Y., & Yang, Q. (2020) · Advanced Science · doi:10.1002/advs.201903088 · Cited by 825
Coralloid Carbon Fiber-Based Composite Lithium Anode for Robust Lithium Metal Batteries
Zhang, R., Chen, X., Shen, X., Zhang, X.-Q., Chen, X.-R., Cheng, X.-B., Yan, C., Zhao, C.-Z., & Zhang, Q. (2018) · Joule · doi:10.1016/j.joule.2018.02.001 · Cited by 728
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
A Flexible Solid Electrolyte Interphase Layer for Long‐Life Lithium Metal Anodes
Li, N., Shi, Y., Yin, Y., Zeng, X., Li, J., Li, C., Wan, L., Wen, R., & Guo, Y. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710806 · Cited by 721
Interfaces in Solid-State Lithium Batteries
Xu, L., Tang, S., Cheng, Y., Wang, K., Liang, J., Liu, C., Cao, Y.-C., Wei, F., & Mai, L. (2018) · Joule · doi:10.1016/j.joule.2018.07.009 · Cited by 702
Liu, W., Liu, P., & Mitlin, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002297 · Cited by 687
Ionic Conduction in Polymer‐Based Solid Electrolytes
Li, Z., Fu, J., Zhou, X., Gui, S., Wei, L., Yang, H., Li, H., & Guo, X. (2023) · Advanced Science · doi:10.1002/advs.202201718 · Cited by 678
Artificial Soft–Rigid Protective Layer for Dendrite‐Free Lithium Metal Anode
Xu, R., Zhang, X., Cheng, X., Peng, H., Zhao, C., Yan, C., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705838 · Cited by 670
Beyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Towards better Li metal anodes: Challenges and strategies
Zhang, Y., Zuo, T.-T., Popovic, J., Lim, K., Yin, Y.-X., Maier, J., & Guo, Y.-G. (2020) · Materials Today · doi:10.1016/j.mattod.2019.09.018 · Cited by 653
Self-citationReviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
Lu, Y., Zhao, C., Yuan, H., Cheng, X., Huang, J., & Zhang, Q. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009925 · Cited by 562
Recent developments and insights into the understanding of Na metal anodes for Na-metal batteries
Zhao, Y., Adair, K. R., & Sun, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01373j · Cited by 533
Dual‐Layered Film Protected Lithium Metal Anode to Enable Dendrite‐Free Lithium Deposition
Yan, C., Cheng, X., Tian, Y., Chen, X., Zhang, X., Li, W., Huang, J., & Zhang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201707629 · Cited by 513
Zhao, N., Khokhar, W., Bi, Z., Shi, C., Guo, X., Fan, L.-Z., & Nan, C.-W. (2019) · Joule · doi:10.1016/j.joule.2019.03.019 · Cited by 492
Liu, D.-H., Bai, Z., Li, M., Yu, A., Luo, D., Liu, W., Yang, L., Lu, J., Amine, K., & Chen, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00636b · Cited by 483
Challenges and perspectives of garnet solid electrolytes for all solid-state lithium batteries
Liu, Q., Geng, Z., Han, C., Fu, Y., Li, S., He, Y.-B., Kang, F., & Li, B. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.019 · Cited by 478
Progress on the Critical Parameters for Lithium–Sulfur Batteries to be Practically Viable
Chung, S., Chang, C., & Manthiram, A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801188 · Cited by 477
Duan, H., Fan, M., Chen, W., Li, J., Wang, P., Wang, W., Shi, J., Yin, Y., Wan, L., & Guo, Y. (2019) · Advanced Materials · doi:10.1002/adma.201807789 · Cited by 466
Design of Hollow Nanostructures for Energy Storage, Conversion and Production
Wang, J., Cui, Y., & Wang, D. (2019) · Advanced Materials · doi:10.1002/adma.201801993 · Cited by 453
Effects of Polymer Coatings on Electrodeposited Lithium Metal
Lopez, J., Pei, A., Oh, J. Y., Wang, G.-J. N., Cui, Y., & Bao, Z. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b06047 · Cited by 452
Zhao, H., Lei, D., He, Y., Yuan, Y., Yun, Q., Ni, B., Lv, W., Li, B., Yang, Q., Kang, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800266 · Cited by 431
Zhao, Y., Wang, L., Zhou, Y., Liang, Z., Tavajohi, N., Li, B., & Li, T. (2021) · Advanced Science · doi:10.1002/advs.202003675 · Cited by 387
Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery
Shen, X., Li, Y., Qian, T., Liu, J., Zhou, J., Yan, C., & Goodenough, J. B. (2019) · Nature Communications · doi:10.1038/s41467-019-08767-0 · Cited by 386
Key Aspects of Lithium Metal Anodes for Lithium Metal Batteries
Ghazi, Z. A., Sun, Z., Sun, C., Qi, F., An, B., Li, F., & Cheng, H. (2019) · Small · doi:10.1002/smll.201900687 · Cited by 382
Li, F., He, J., Liu, J., Wu, M., Hou, Y., Wang, H., Qi, S., Liu, Q., Hu, J., & Ma, J. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202013993 · Cited by 373
Lithium Nitrate Regulated Sulfone Electrolytes for Lithium Metal Batteries
Fu, J., Ji, X., Chen, J., Chen, L., Fan, X., Mu, D., & Wang, C. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202009575 · Cited by 358
Zhu, P., Yan, C., Dirican, M., Zhu, J., Zang, J., Selvan, R. K., Chung, C.-C., Jia, H., Li, Y., Kiyak, Y., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta10517g · Cited by 356
Zhang, C., Lv, W., Zhou, G., Huang, Z., Zhang, Y., Lyu, R., Wu, H., Yun, Q., Kang, F., & Yang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703404 · Cited by 351
Self-citationHan, B., Zhang, Z., Zou, Y., Xu, K., Xu, G., Wang, H., Meng, H., Deng, Y., Li, J., & Gu, M. (2021) · Advanced Materials · doi:10.1002/adma.202100404 · Cited by 346
Hu, J., He, P., Zhang, B., Wang, B., & Fan, L.-Z. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.01.006 · Cited by 343
Bayaguud, A., Fu, Y., & Zhu, C. (2022) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2021.04.016 · Cited by 335
Status and Prospects of MXene‐Based Lithium–Sulfur Batteries
Zhao, Q., Zhu, Q., Liu, Y., & Xu, B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100457 · Cited by 334
A MOF-based single-ion Zn2+ solid electrolyte leading to dendrite-free rechargeable Zn batteries
Wang, Z., Hu, J., Han, L., Wang, Z., Wang, H., Zhao, Q., Liu, J., & Pan, F. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.11.038 · Cited by 332
Sulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review
Reddy, M. V., Julien, C. M., Mauger, A., & Zaghib, K. (2020) · Nanomaterials · doi:10.3390/nano10081606 · Cited by 331
Biomass-based materials for green lithium secondary batteries
Jin, C., Nai, J., Sheng, O., Yuan, H., Zhang, W., Tao, X., & Lou, X. W. (. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02848g · Cited by 324
Design of Complex Nanomaterials for Energy Storage: Past Success and Future Opportunity
Liu, Y., Zhou, G., Liu, K., & Cui, Y. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00450 · Cited by 323
Dopant‐Dependent Stability of Garnet Solid Electrolyte Interfaces with Lithium Metal
Zhu, Y., Connell, J. G., Tepavcevic, S., Zapol, P., Garcia‐Mendez, R., Taylor, N. J., Sakamoto, J., Ingram, B. J., Curtiss, L. A., Freeland, J. W., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803440 · Cited by 323
Perspectives for restraining harsh lithium dendrite growth: Towards robust lithium metal anodes
Wu, F., Yuan, Y.-X., Cheng, X.-B., Bai, Y., Li, Y., Wu, C., & Zhang, Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.03.024 · Cited by 319
One-pot solution coating of high quality LiF layer to stabilize Li metal anode
Lang, J., Long, Y., Qu, J., Luo, X., Wei, H., Huang, K., Zhang, H., Qi, L., Zhang, Q., Li, Z., et al. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.04.024 · Cited by 318
Yang, C., Xie, H., Ping, W., Fu, K., Liu, B., Rao, J., Dai, J., Wang, C., Pastel, G., & Hu, L. (2019) · Advanced Materials · doi:10.1002/adma.201804815 · Cited by 317
Self-citationIn situ polymerization of solid-state polymer electrolytes for lithium metal batteries: a review
Zou, S., Yang, Y., Wang, J., Zhou, X., Wan, X., Zhu, M., & Liu, J. (2024) · Energy & Environmental Science · doi:10.1039/d4ee00822g · Cited by 305
Yang, C., Zhang, L., Liu, B., Xu, S., Hamann, T., McOwen, D., Dai, J., Luo, W., Gong, Y., Wachsman, E. D., et al. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1719758115 · Cited by 303
Self-citationUnlocking the Energy Capabilities of Lithium Metal Electrode with Solid-State Electrolytes
Shen, Y., Zhang, Y., Han, S., Wang, J., Peng, Z., & Chen, L. (2018) · Joule · doi:10.1016/j.joule.2018.06.021 · Cited by 293
Self-citation3D TiC/C Core/Shell Nanowire Skeleton for Dendrite‐Free and Long‐Life Lithium Metal Anode
Liu, S., Xia, X., Zhong, Y., Deng, S., Yao, Z., Zhang, L., Cheng, X., Wang, X., Zhang, Q., & Tu, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702322 · Cited by 292
Zhao, Y., Zheng, K., & Sun, X. (2018) · Joule · doi:10.1016/j.joule.2018.11.012 · Cited by 288
Advances in Interfaces between Li Metal Anode and Electrolyte
Zhang, X., Cheng, X., & Zhang, Q. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701097 · Cited by 287
Progress in solid electrolytes toward realizing solid-state lithium batteries
Takada, K. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.003 · Cited by 279
Review—Li Metal Anode in Working Lithium-Sulfur Batteries
Cheng, X.-B., Huang, J.-Q., & Zhang, Q. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0111801jes · Cited by 277
Building Better Batteries in the Solid State: A Review
Mauger, A., Julien, C. M., Paolella, A., Armand, M., & Zaghib, K. (2019) · Materials · doi:10.3390/ma12233892 · Cited by 277
Zhao, C.-Z., Zhao, B.-C., Yan, C., Zhang, X.-Q., Huang, J.-Q., Mo, Y., Xu, X., Li, H., & Zhang, Q. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.07.026 · Cited by 276
Engineering of lithium-metal anodes towards a safe and stable battery
Wang, L., Zhou, Z., Yan, X., Hou, F., Wen, L., Luo, W., Liang, J., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.014 · Cited by 270
Jiang, Z., Wang, S., Chen, X., Yang, W., Yao, X., Hu, X., Han, Q., & Wang, H. (2020) · Advanced Materials · doi:10.1002/adma.201906221 · Cited by 266
3D Wettable Framework for Dendrite‐Free Alkali Metal Anodes
Zhang, Y., Wang, C., Pastel, G., Kuang, Y., Xie, H., Li, Y., Liu, B., Luo, W., Chen, C., & Hu, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800635 · Cited by 265
Self-citationLi, X., Ren, Z., Norouzi Banis, M., Deng, S., Zhao, Y., Sun, Q., Wang, C., Yang, X., Li, W., Liang, J., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01676 · Cited by 263
Anode Interface Engineering and Architecture Design for High‐Performance Lithium–Sulfur Batteries
Zhao, Y., Ye, Y., Wu, F., Li, Y., Li, L., & Chen, R. (2019) · Advanced Materials · doi:10.1002/adma.201806532 · Cited by 261
High-capacity rechargeable batteries based on deeply cyclable lithium metal anodes
Shi, Q., Zhong, Y., Wu, M., Wang, H., & Wang, H. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1803634115 · Cited by 258
Recent advances in effective protection of sodium metal anode
Fan, L., & Li, X. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.017 · Cited by 255
Tang, L., Chen, B., Zhang, Z., Ma, C., Chen, J., Huang, Y., Zhang, F., Dong, Q., Xue, G., Chen, D., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-37997-6 · Cited by 255
Metadata
- Authors
- Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-07-24
- Volume
- 29
- Issue
- 36
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2737378308
- Cited by
- 757
- References
- 142
- FWCI
- 36.92
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.