The DOI matches its Crossref record; 164 of the 164 references it cites were found in a registry or an index.
A New Frontier of Printed Electronics: Flexible Hybrid Electronics
Abstract
The performance and integration density of silicon integrated circuits (ICs) have progressed at an unprecedented pace in the past 60 years. While silicon ICs thrive at low‐power high‐performance computing, creating flexible and large‐area electronics using silicon remains a challenge. On the other hand, flexible and printed electronics use intrinsically flexible materials and printing techniques to manufacture compliant and large‐area electronics. Nonetheless, flexible electronics are not as efficient as silicon ICs for computation and signal communication. Flexible hybrid electronics (FHE) leverages the strengths of these two dissimilar technologies. It uses flexible and printed electronics where flexibility and scalability are required, i.e., for sensing and actuating, and silicon ICs for computation and communication purposes. Combining flexible electronics and silicon ICs yields a very powerful and versatile technology with a vast range of applications. Here, the fundamental building blocks of an FHE system, printed sensors and circuits, thinned silicon ICs, printed antennas, printed energy harvesting and storage modules, and printed displays, are discussed. Emerging application areas of FHE in wearable health, structural health, industrial, environmental, and agricultural sensing are reviewed. Overall, the recent progress, fabrication, application, and challenges, and an outlook, related to FHE are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis
Gao, W., Emaminejad, S., Nyein, H. Y. Y., Challa, S., Chen, K., Peck, A., Fahad, H. M., Ota, H., Shiraki, H., Kiriya, D., et al. (2016) · Nature · doi:10.1038/nature16521 · Cited by 5,087
Materials and Mechanics for Stretchable Electronics
Rogers, J. A., Someya, T., & Huang, Y. (2010) · Science · doi:10.1126/science.1182383 · Cited by 5,042
White organic light-emitting diodes with fluorescent tube efficiency
Reineke, S., Lindner, F., Schwartz, G., Seidler, N., Walzer, K., Lüssem, B., & Leo, K. (2009) · Nature · doi:10.1038/nature08003 · Cited by 3,462
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
A Summary Review of Vibration-Based Damage Identification Methods
Doebling, S. W., Farrar, C. R., & Prime, M. B. (1998) · The Shock and Vibration Digest · doi:10.1177/058310249803000201 · Cited by 2,823
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
Skin electronics from scalable fabrication of an intrinsically stretchable transistor array
Wang, S., Xu, J., Wang, W., Wang, G.-J. N., Rastak, R., Molina-Lopez, F., Chung, J. W., Niu, S., Feig, V. R., Lopez, J., et al. (2018) · Nature · doi:10.1038/nature25494 · Cited by 2,198
Liquid-crystalline semiconducting polymers with high charge-carrier mobility
McCulloch, I., Heeney, M., Bailey, C., Genevicius, K., MacDonald, I., Shkunov, M., Sparrowe, D., Tierney, S., Wagner, R., Zhang, W., et al. (2006) · Nature Materials · doi:10.1038/nmat1612 · Cited by 2,151
Stretchable active-matrix organic light-emitting diode display using printable elastic conductors
Sekitani, T., Nakajima, H., Maeda, H., Fukushima, T., Aida, T., Hata, K., & Someya, T. (2009) · Nature Materials · doi:10.1038/nmat2459 · Cited by 1,767
Materials and Applications for Large Area Electronics: Solution-Based Approaches
Arias, A. C., MacKenzie, J. D., McCulloch, I., Rivnay, J., & Salleo, A. (2010) · Chemical Reviews · doi:10.1021/cr900150b · Cited by 1,733
Self-citationA Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring
Lynch, J. P. (2006) · The Shock and Vibration Digest · doi:10.1177/0583102406061499 · Cited by 1,533
Monitoring of Vital Signs with Flexible and Wearable Medical Devices
Khan, Y., Ostfeld, A. E., Lochner, C. M., Pierre, A., & Arias, A. C. (2016) · Advanced Materials · doi:10.1002/adma.201504366 · Cited by 1,408
Self-citationXu, S., Zhang, Y., Cho, J., Lee, J., Huang, X., Jia, L., Fan, J. A., Su, Y., Su, J., Zhang, H., et al. (2013) · Nature Communications · doi:10.1038/ncomms2553 · Cited by 1,404
Bio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
Recent Advances in Flexible and Stretchable Bio‐Electronic Devices Integrated with Nanomaterials
Choi, S., Lee, H., Ghaffari, R., Hyeon, T., & Kim, D. (2016) · Advanced Materials · doi:10.1002/adma.201504150 · Cited by 1,104
Self-powered ultra-flexible electronics via nano-grating-patterned organic photovoltaics
Park, S., Heo, S. W., Lee, W., Inoue, D., Jiang, Z., Yu, K., Jinno, H., Hashizume, D., Sekino, M., Yokota, T., et al. (2018) · Nature · doi:10.1038/s41586-018-0536-x · Cited by 1,068
(2012) · Cited by 1,059
Ultraflexible organic photonic skin
Yokota, T., Zalar, P., Kaltenbrunner, M., Jinno, H., Matsuhisa, N., Kitanosako, H., Tachibana, Y., Yukita, W., Koizumi, M., & Someya, T. (2016) · Science Advances · doi:10.1126/sciadv.1501856 · Cited by 1,024
Structural Health Monitoring: A Machine Learning Perspective
Farrar, C. R., & Worden, K. (2012) · Wiley eBooks · doi:10.1002/9781118443118 · Cited by 1,014
Technology developments in structural health monitoring of large-scale bridges
Ko, J. M., & Ni, Y. Q. (2005) · Engineering Structures · doi:10.1016/j.engstruct.2005.02.021 · Cited by 1,010
Lim, H., Kim, H. S., Qazi, R., Kwon, Y., Jeong, J., & Yeo, W. (2020) · Advanced Materials · doi:10.1002/adma.201901924 · Cited by 1,002
Structural health monitoring of civil infrastructure
Brownjohn, J. M. W. (2007) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2006.1925 · Cited by 998
Infrared thermography for condition monitoring – A review
Bagavathiappan, S., Lahiri, B. B., Saravanan, T., Philip, J., & Jayakumar, T. (2013) · Infrared Physics & Technology · doi:10.1016/j.infrared.2013.03.006 · Cited by 979
All‐Organic Vapor Sensor Using Inkjet‐Printed Reduced Graphene Oxide
Dua, V., Surwade, S. P., Ammu, S., Agnihotra, S. R., Jain, S., Roberts, K. E., Park, S., Ruoff, R. S., & Manohar, S. K. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200905089 · Cited by 932
Conductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
Recent applications of fiber optic sensors to health monitoring in civil engineering
Li, H.-N., Li, D.-S., & Song, G.-B. (2004) · Engineering Structures · doi:10.1016/j.engstruct.2004.05.018 · Cited by 897
Emaminejad, S., Gao, W., Wu, E., Davies, Z. A., Yin Yin Nyein, H., Challa, S., Ryan, S. P., Fahad, H. M., Chen, K., Shahpar, Z., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1701740114 · Cited by 839
Binodal, wireless epidermal electronic systems with in-sensor analytics for neonatal intensive care
Chung, H. U., Kim, B. H., Lee, J. Y., Lee, J., Xie, Z., Ibler, E. M., Lee, K., Banks, A., Jeong, J. Y., Kim, J., et al. (2019) · Science · doi:10.1126/science.aau0780 · Cited by 807
Perelaer, J., Smith, P. J., Mager, D., Soltman, D., Volkman, S. K., Subramanian, V., Korvink, J. G., & Schubert, U. S. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00264j · Cited by 736
Hybrid 3D Printing of Soft Electronics
Valentine, A. D., Busbee, T. A., Boley, J. W., Raney, J. R., Chortos, A., Kotikian, A., Berrigan, J. D., Durstock, M. F., & Lewis, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201703817 · Cited by 688
Wearable salivary uric acid mouthguard biosensor with integrated wireless electronics
Kim, J., Imani, S., de Araujo, W. R., Warchall, J., Valdés-Ramírez, G., Paixão, T. R. L. C., Mercier, P. P., & Wang, J. (2015) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2015.07.039 · Cited by 678
Organic materials for printed electronics
Berggren, M., Nilsson, D., & Robinson, N. D. (2007) · Nature Materials · doi:10.1038/nmat1817 · Cited by 663
Flexible Hybrid Electronics for Digital Healthcare
Ma, Y., Zhang, Y., Cai, S., Han, Z., Liu, X., Wang, F., Cao, Y., Wang, Z., Li, H., Chen, Y., et al. (2020) · Advanced Materials · doi:10.1002/adma.201902062 · Cited by 620
Multifunctional Skin‐Inspired Flexible Sensor Systems for Wearable Electronics
Xu, K., Lu, Y., & Takei, K. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800628 · Cited by 602
Bendable Inorganic Thin-Film Battery for Fully Flexible Electronic Systems
Koo, M., Park, K.-I., Lee, S. H., Suh, M., Jeon, D. Y., Choi, J. W., Kang, K., & Lee, K. J. (2012) · Nano Letters · doi:10.1021/nl302254v · Cited by 558
Reversibly Deformable and Mechanically Tunable Fluidic Antennas
So, J., Thelen, J., Qusba, A., Hayes, G. J., Lazzi, G., & Dickey, M. D. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900604 · Cited by 555
Structural Health Monitoring in mainland China: Review and Future Trends
Ou, J., & Li, H. (2010) · Structural Health Monitoring · doi:10.1177/1475921710365269 · Cited by 525
Flexible Hybrid Sensors for Health Monitoring: Materials and Mechanisms to Render Wearability
Gao, Y., Yu, L., Yeo, J. C., & Lim, C. T. (2020) · Advanced Materials · doi:10.1002/adma.201902133 · Cited by 505
Chan, T. H. T., Yu, L., Tam, H. Y., Ni, Y. Q., Liu, S. Y., Chung, W. H., & Cheng, L. K. (2006) · Engineering Structures · doi:10.1016/j.engstruct.2005.09.018 · Cited by 484
Smart Bandage for Monitoring and Treatment of Chronic Wounds
Mostafalu, P., Tamayol, A., Rahimi, R., Ochoa, M., Khalilpour, A., Kiaee, G., Yazdi, I. K., Bagherifard, S., Dokmeci, M. R., Ziaie, B., et al. (2018) · Small · doi:10.1002/smll.201703509 · Cited by 481
A Vision-Based Sensor for Noncontact Structural Displacement Measurement
Feng, D., Feng, M., Ozer, E., & Fukuda, Y. (2015) · Sensors · doi:10.3390/s150716557 · Cited by 452
All-Printed and Roll-to-Roll-Printable 13.56-MHz-Operated 1-bit RF Tag on Plastic Foils
Jung, M., Kim, J., Noh, J., Lim, N., Lim, C., Lee, G., Kim, J., Kang, H., Jung, K., Leonard, A. D., et al. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2009.2039541 · Cited by 452
A Wearable Microfluidic Sensing Patch for Dynamic Sweat Secretion Analysis
Nyein, H. Y. Y., Tai, L.-C., Ngo, Q. P., Chao, M., Zhang, G. B., Gao, W., Bariya, M., Bullock, J., Kim, H., Fahad, H. M., et al. (2018) · ACS Sensors · doi:10.1021/acssensors.7b00961 · Cited by 446
Printed Carbon Nanotube Electronics and Sensor Systems
Chen, K., Gao, W., Emaminejad, S., Kiriya, D., Ota, H., Nyein, H. Y. Y., Takei, K., & Javey, A. (2016) · Advanced Materials · doi:10.1002/adma.201504958 · Cited by 425
Adhesive RFID Sensor Patch for Monitoring of Sweat Electrolytes
Rose, D. P., Ratterman, M. E., Griffin, D. K., Hou, L., Kelley-Loughnane, N., Naik, R. R., Hagen, J. A., Papautsky, I., & Heikenfeld, J. C. (2015) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2014.2369991 · Cited by 416
All‐Printed Flexible and Stretchable Electronics
Mohammed, M. G., & Kramer, R. (2017) · Advanced Materials · doi:10.1002/adma.201604965 · Cited by 410
Flexible and stretchable power sources for wearable electronics
Zamarayeva, A. M., Ostfeld, A. E., Wang, M., Duey, J. K., Deckman, I., Lechêne, B. P., Davies, G., Steingart, D. A., & Arias, A. C. (2017) · Science Advances · doi:10.1126/sciadv.1602051 · Cited by 400
Self-citationRecent progress on flexible lithium rechargeable batteries
Gwon, H., Hong, J., Kim, H., Seo, D.-H., Jeon, S., & Kang, K. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42927j · Cited by 391
Cable‐Type Flexible Lithium Ion Battery Based on Hollow Multi‐Helix Electrodes
Kwon, Y. H., Woo, S., Jung, H., Yu, H. K., Kim, K., Oh, B. H., Ahn, S., Lee, S., Song, S., Cho, J., et al. (2012) · Advanced Materials · doi:10.1002/adma.201202196 · Cited by 378
Lin, S., Bai, X., Wang, H., Wang, H., Song, J., Huang, K., Wang, C., Wang, N., Li, B., Lei, M., et al. (2017) · Advanced Materials · doi:10.1002/adma.201703238 · Cited by 367
Ultra-thin chips for high-performance flexible electronics
Gupta, S., Navaraj, W. T., Lorenzelli, L., & Dahiya, R. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0021-5 · Cited by 363
Transfer printing techniques for flexible and stretchable inorganic electronics
Linghu, C., Zhang, S., Wang, C., & Song, J. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0037-x · Cited by 357
Zhu, C., Chortos, A., Wang, Y., Pfattner, R., Lei, T., Hinckley, A. C., Pochorovski, I., Yan, X., To, J. W.-F., Oh, J. Y., et al. (2018) · Nature Electronics · doi:10.1038/s41928-018-0041-0 · Cited by 356
Wang, Q., Zhang, D., Tian, S., & Ning, P. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41029 · Cited by 333
Yang, L., Zhang, R., Staiculescu, D., Wong, C. P., & Tentzeris, M. M. (2009) · IEEE Antennas and Wireless Propagation Letters · doi:10.1109/lawp.2009.2024104 · Cited by 333
Recent progress of high performance polymer OLED and OPV materials for organic printed electronics
Sekine, C., Tsubata, Y., Yamada, T., et al. (2014) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/15/3/034203 · Cited by 329
Bucella, S. G., Luzio, A., Gann, E., Thomsen, L., McNeill, C. R., Pace, G., Perinot, A., Chen, Z., Facchetti, A., & Caironi, M. (2015) · Nature Communications · doi:10.1038/ncomms9394 · Cited by 324
Khan, Y., Garg, M., Gui, Q., Schadt, M., Gaikwad, A., Han, D., Yamamoto, N. A. D., Hart, P., Welte, R., Wilson, W., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201603763 · Cited by 316
Self-citationInstrumentation and health monitoring of cable-supported bridges
Wong, K.-Y. (2004) · Structural Control and Health Monitoring · doi:10.1002/stc.33 · Cited by 307
Inkjet-printed stretchable and low voltage synaptic transistor array
Molina-Lopez, F., Gao, T. Z., Kraft, U., Zhu, C., Öhlund, T., Pfattner, R., Feig, V. R., Kim, Y., Wang, S., Yun, Y., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10569-3 · Cited by 296
The 8th European Conference on Antennas and Propagation (EuCAP 2014)
(2014) · doi:10.1109/eucap32451.2014 · Cited by 294
Stretchable and Reversibly Deformable Radio Frequency Antennas Based on Silver Nanowires
Song, L., Myers, A. C., Adams, J. J., & Zhu, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405972e · Cited by 292
Three-dimensional monolithic integration in flexible printed organic transistors
Kwon, J., Takeda, Y., Shiwaku, R., Tokito, S., Cho, K., & Jung, S. (2018) · Nature Communications · doi:10.1038/s41467-018-07904-5 · Cited by 285
A flexible organic reflectance oximeter array
Khan, Y., Han, D., Pierre, A., Ting, J., Wang, X., Lochner, C. M., Bovo, G., Yaacobi-Gross, N., Newsome, C., Wilson, R., et al. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1813053115 · Cited by 278
Self-citationUltrathin Quantum Dot Display Integrated with Wearable Electronics
Kim, J., Shim, H. J., Yang, J., Choi, M. K., Kim, D. C., Kim, J., Hyeon, T., & Kim, D. (2017) · Advanced Materials · doi:10.1002/adma.201700217 · Cited by 275
Experimental assessment of high-rate GPS receivers for deformation monitoring of bridge
Yi, T., Li, H., & Gu, M. (2012) · Measurement · doi:10.1016/j.measurement.2012.07.018 · Cited by 271
Chang, J. S., Facchetti, A. F., & Reuss, R. (2017) · IEEE Journal on Emerging and Selected Topics in Circuits and Systems · doi:10.1109/jetcas.2017.2673863 · Cited by 271
Highly Stretchable Alkaline Batteries Based on an Embedded Conductive Fabric
Gaikwad, A. M., Zamarayeva, A. M., Rousseau, J., Chu, H., Derin, I., & Steingart, D. A. (2012) · Advanced Materials · doi:10.1002/adma.201201329 · Cited by 251
Compliant plant wearables for localized microclimate and plant growth monitoring
Nassar, J. M., Khan, S. M., Villalva, D. R., Nour, M. M., Almuslem, A. S., & Hussain, M. M. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0039-8 · Cited by 251
Zhang, R., Deng, H., Valenca, R., Jin, J., Fu, Q., Bilotti, E., & Peijs, T. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.09.016 · Cited by 250
Three-dimensional printed electronics
Lewis, J. A., & Ahn, B. Y. (2015) · Nature · doi:10.1038/518042a · Cited by 249
Introduction to Printed Electronics
Suganuma, K. (2014) · SpringerBriefs in Electrical and Computer Engineering · doi:10.1007/978-1-4614-9625-0 · Cited by 247
Carbon Nanotube Sensing Skins for Spatial Strain and Impact Damage Identification
Loh, K. J., Hou, T.-C., Lynch, J. P., & Kotov, N. A. (2009) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-009-0043-y · Cited by 242
Second Skin Enabled by Advanced Electronics
Oh, J. Y., & Bao, Z. (2019) · Advanced Science · doi:10.1002/advs.201900186 · Cited by 238
Impedance sensing device enables early detection of pressure ulcers in vivo
Swisher, S. L., Lin, M. C., Liao, A., Leeflang, E. J., Khan, Y., Pavinatto, F. J., Mann, K., Naujokas, A., Young, D., Roy, S., et al. (2015) · Nature Communications · doi:10.1038/ncomms7575 · Cited by 235
Self-citationAll‐Printed Flexible Organic Transistors Enabled by Surface Tension‐Guided Blade Coating
Pierre, A., Sadeghi, M., Payne, M. M., Facchetti, A., Anthony, J. E., & Arias, A. C. (2014) · Advanced Materials · doi:10.1002/adma.201401520 · Cited by 234
Self-citationStructural health monitoring of innovative bridges in Canada with fiber optic sensors
Tennyson, R. C., Mufti, A. A., Rizkalla, S., Tadros, G., & Benmokrane, B. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/3/320 · Cited by 232
Assembly and applications of 3D conformal electronics on curvilinear surfaces
Huang, Y., Wu, H., Xiao, L., Duan, Y., Zhu, H., Bian, J., Ye, D., & Yin, Z. (2019) · Materials Horizons · doi:10.1039/c8mh01450g · Cited by 230
High-performance flexible energy storage and harvesting system for wearable electronics
Ostfeld, A. E., Gaikwad, A. M., Khan, Y., & Arias, A. C. (2016) · Scientific Reports · doi:10.1038/srep26122 · Cited by 229
Self-citationCao, X., Lau, C., Liu, Y., Wu, F., Gui, H., Liu, Q., Ma, Y., Wan, H., Amer, M. R., & Zhou, C. (2016) · ACS Nano · doi:10.1021/acsnano.6b05368 · Cited by 228
Grau, G., Cen, J., Kang, H., Kitsomboonloha, R., Scheideler, W. J., & Subramanian, V. (2016) · Flexible and Printed Electronics · doi:10.1088/2058-8585/1/2/023002 · Cited by 226
Recent advances in upscalable wet methods and ink formulations for printed electronics
Aleeva, Y., & Pignataro, B. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc00618f · Cited by 225
Inkjet-Printed Humidity Sensor for Passive UHF RFID Systems
Virtanen, J., Ukkonen, L., Bjorninen, T., Elsherbeni, A. Z., & Sydänheimo, L. (2011) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2011.2130070 · Cited by 214
Wang, X., & Liu, J. (2016) · Micromachines · doi:10.3390/mi7120206 · Cited by 214
High Detectivity All‐Printed Organic Photodiodes
Pierre, A., Deckman, I., Lechêne, P. B., & Arias, A. C. (2015) · Advanced Materials · doi:10.1002/adma.201502238 · Cited by 212
Self-citationApplication of 3D Printing for Smart Objects with Embedded Electronic Sensors and Systems
Ota, H., Emaminejad, S., Gao, Y., Zhao, A., Wu, E., Challa, S., Chen, K., Fahad, H. M., Jha, A. K., Kiriya, D., et al. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600013 · Cited by 212
Semiconducting and Metallic Polymers
Heeger, A. J., Sariçiftçi, N. S., & Namdas, E. B. (2010) · Cited by 210
Kim, S.-H., Choi, K.-H., Cho, S.-J., Choi, S., Park, S., & Lee, S.-Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01394 · Cited by 209
Synthesis of monodisperse silver nanoparticles for ink-jet printed flexible electronics
Zhang, Z., Zhang, X., Xin, Z., Deng, M., Wen, Y., & Song, Y. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/42/425601 · Cited by 208
A low-cost flexible pH sensor array for wound assessment
Rahimi, R., Ochoa, M., Parupudi, T., Zhao, X., Yazdi, I. K., Dokmeci, M. R., Tamayol, A., Khademhosseini, A., & Ziaie, B. (2016) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2015.12.082 · Cited by 205
Highly Flexible and Conductive Printed Graphene for Wireless Wearable Communications Applications
Huang, X., Leng, T., Zhu, M., Zhang, X., Chen, J., Chang, K., Aqeeli, M., Geim, A. K., Novoselov, K. S., & Hu, Z. (2015) · Scientific Reports · doi:10.1038/srep18298 · Cited by 202
Printed Electronics Based on Inorganic Semiconductors: From Processes and Materials to Devices
Garlapati, S. K., Divya, M., Breitung, B., Kruk, R., Hahn, H., & Dasgupta, S. (2018) · Advanced Materials · doi:10.1002/adma.201707600 · Cited by 202
Screen-Printing Fabrication and Characterization of Stretchable Electronics
Suikkola, J., Björninen, T., Mosallaei, M., Kankkunen, T., Iso-Ketola, P., Ukkonen, L., Vanhala, J., & Mäntysalo, M. (2016) · Scientific Reports · doi:10.1038/srep25784 · Cited by 201
Optical absorption in transparent PDMS materials applied for multimode waveguides fabrication
Cai, D. K., Neyer, A., Kuckuk, R., & Heise, H. M. (2008) · Optical Materials · doi:10.1016/j.optmat.2007.05.041 · Cited by 192
Gaikwad, A. M., Arias, A. C., & Steingart, D. A. (2015) · Energy Technology · doi:10.1002/ente.201402182 · Cited by 189
Self-citationA Wireless Sensor Network‐Based Structural Health Monitoring System for Highway Bridges
Hu, X., Wang, B., & Ji, H. (2013) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/j.1467-8667.2012.00781.x · Cited by 186
Gigahertz integrated circuits based on carbon nanotube films
Zhong, D., Zhang, Z., Ding, L., Han, J., Xiao, M., Si, J., Xu, L., Qiu, C., & Peng, L.-M. (2017) · Nature Electronics · doi:10.1038/s41928-017-0003-y · Cited by 185
Singh, N., Galande, C., Miranda, A., Mathkar, A., Gao, W., Reddy, A. L. M., Vlad, A., & Ajayan, P. M. (2012) · Scientific Reports · doi:10.1038/srep00481 · Cited by 167
Flexible tag microlab development: Gas sensors integration in RFID flexible tags for food logistic
ABAD, E., ZAMPOLLI, S., MARCO, S., SCORZONI, A., MAZZOLAI, B., JUARROS, A., GOMEZ, D., ELMI, I., CARDINALI, G., & GOMEZ, J. (2007) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2007.07.007 · Cited by 165
Arrays of Ultracompliant Electrochemical Dry Gel Cells for Stretchable Electronics
Kaltenbrunner, M., Kettlgruber, G., Siket, C., Schwödiauer, R., & Bauer, S. (2010) · Advanced Materials · doi:10.1002/adma.200904068 · Cited by 165
Inkjet‐Printed Flexible Gold Electrode Arrays for Bioelectronic Interfaces
Khan, Y., Pavinatto, F. J., Lin, M. C., Liao, A., Swisher, S. L., Mann, K., Subramanian, V., Maharbiz, M. M., & Arias, A. C. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503316 · Cited by 165
Self-citationBang, J., Lee, W. S., Park, B., Joh, H., Woo, H. K., Jeon, S., Ahn, J., Jeong, C., Kim, T., & Oh, S. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903047 · Cited by 162
Printing Flexible and Hybrid Electronics for Human Skin and Eye‐Interfaced Health Monitoring Systems
Kim, K., Kim, B., & Lee, C. H. (2019) · Advanced Materials · doi:10.1002/adma.201902051 · Cited by 153
All-printed strain sensors: Building blocks of the aircraft structural health monitoring system
Zhang, Y., Anderson, N., Bland, S. M., et al. (2016) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2016.10.007 · Cited by 151
Linghu, C., Wang, C., Cen, N., Wu, J., Lai, Z., & Song, J. (2018) · Soft Matter · doi:10.1039/c8sm01996g · Cited by 151
Flexible Wireless Antenna Sensor: A Review
Huang, H. (2013) · IEEE Sensors Journal · doi:10.1109/jsen.2013.2242464 · Cited by 150
Properties and Printability of Inkjet and Screen-Printed Silver Patterns for RFID Antennas
Salmerón, J. F., Molina‐Lopez, F., Briand, D., Ruan, J. J., Rivadeneyra, A., Carvajal, M. A., Capitán-Vallvey, L. F., de Rooij, N. F., & Palma, A. J. (2013) · Journal of Electronic Materials · doi:10.1007/s11664-013-2893-4 · Cited by 150
An epidermal alkaline rechargeable Ag–Zn printable tattoo battery for wearable electronics
Berchmans, S., Bandodkar, A. J., Jia, W., Ramírez, J., Meng, Y. S., & Wang, J. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03256j · Cited by 149
Vyas, R. J., Lakafosis, V., Lee, H., Shaker, G. S. A., Yang, L., Orecchini, G., Traille, A. N., Tentzeris, M. M., & Roselli, L. (2011) · IEEE Sensors Journal · doi:10.1109/jsen.2011.2166996 · Cited by 146
A Survey of NFC Sensors Based on Energy Harvesting for IoT Applications
Lázaro, A., Villarino, R., & Girbau, D. (2018) · Sensors · doi:10.3390/s18113746 · Cited by 145
Zhao, Y., Gao, S., Zhu, J., Li, J., Xu, H., Xu, K., Cheng, H., & Huang, X. L. (2019) · ACS Omega · doi:10.1021/acsomega.9b01035 · Cited by 141
Tang, W., Yan, T., Ping, J. F., Wu, J. F., & Ying, Y. B. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700021 · Cited by 132
Flexible ethanol sensors on glossy paper substrates operating at room temperature
Arena, A., Donato, N., Saitta, G., Bonavita, A., Rizzo, G., & Neri, G. (2009) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2009.12.053 · Cited by 130
Todorovska, M. I., & Trifunac, M. D. (2007) · Structural Control and Health Monitoring · doi:10.1002/stc.208 · Cited by 129
Oren, S., Ceylan, H., Schnable, P. S., & Dong, L. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700223 · Cited by 129
Scalable printed electronics: an organic decoder addressing ferroelectric non-volatile memory
Ng, T. N., Schwartz, D. E., Lavery, L. L., Whiting, G. L., Russo, B., Krusor, B. S., Veres, J., Bröms, P., Herlogsson, L., Alam, N., et al. (2012) · Scientific Reports · doi:10.1038/srep00585 · Cited by 128
Inkjet printing on paper for the realization of humidity and temperature sensors
Courbat, J., Kim, Y. B., Briand, D., & de Rooij, N. F. (2011) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/transducers.2011.5969506 · Cited by 125
Screen printed passive components for flexible power electronics
Ostfeld, A. E., Deckman, I., Gaikwad, A. M., Lochner, C. M., & Arias, A. C. (2015) · Scientific Reports · doi:10.1038/srep15959 · Cited by 119
Self-citationRecent Advances in Biointegrated Optoelectronic Devices
Xu, H., Yin, L., Liu, C., Sheng, X., & Zhao, N. (2018) · Advanced Materials · doi:10.1002/adma.201800156 · Cited by 119
Organic Multi-Channel Optoelectronic Sensors for Wearable Health Monitoring
Khan, Y., Han, D., Ting, J., Ahmed, M., Nagisetty, R., & Arias, A. C. (2019) · IEEE Access · doi:10.1109/access.2019.2939798 · Cited by 111
Self-citationFully Roll-to-Roll Gravure Printable Wireless (13.56 MHz) Sensor-Signage Tags for Smart Packaging
Kang, H., Park, H., Park, Y.-S., Jung, M., Kim, B. C., Wallace, G. G., & Cho, G. (2014) · Scientific Reports · doi:10.1038/srep05387 · Cited by 111
Characterization of Printed Moisture Sensors in Packaging Surveillance Applications
Unander, T., & Nilsson, H. (2009) · IEEE Sensors Journal · doi:10.1109/jsen.2009.2024866 · Cited by 111
Modular and Reconfigurable Wireless E‐Tattoos for Personalized Sensing
Jeong, H., Wang, L., Ha, T., Mitbander, R., Yang, X., Dai, Z., Qiao, S., Shen, L., Sun, N., & Lu, N. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900117 · Cited by 111
Structural Sensing, Health Monitoring, and Performance Evaluation
Huston, D. R. (2010) · CRC Press eBooks · doi:10.1201/b10369 · Cited by 109
Solution-processable organic and hybrid gate dielectrics for printed electronics
Li, J., Tang, W., Wang, Q., Sun, W., Zhang, Q., Guo, X., Wang, X., & Yan, F. (2018) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2018.02.004 · Cited by 108
Flexible Blade‐Coated Multicolor Polymer Light‐Emitting Diodes for Optoelectronic Sensors
Han, D., Khan, Y., Ting, J., King, S. M., Yaacobi‐Gross, N., Humphries, M. J., Newsome, C. J., & Arias, A. C. (2017) · Advanced Materials · doi:10.1002/adma.201606206 · Cited by 107
Self-citationRoll-to-roll processing of film substrates for hybrid integrated flexible electronics
Palavesam, N., Marin, S., Hemmetzberger, D., Landesberger, C., Bock, K., & Kutter, C. (2018) · Flexible and Printed Electronics · doi:10.1088/2058-8585/aaaa04 · Cited by 107
Todorovska, M. I., & Trifunac, M. D. (2007) · Soil Dynamics and Earthquake Engineering · doi:10.1016/j.soildyn.2006.10.005 · Cited by 102
Recent advances in printed sensors on foil
Mattana, G., & Briand, D. (2015) · Materials Today · doi:10.1016/j.mattod.2015.08.001 · Cited by 101
Flexible Passive near Field Communication Tag for Multigas Sensing
Escobedo, P., Erenas, M. M., López-Ruiz, N., Carvajal, M. A., González-Chocano, S., de Orbe-Payá, I., Capitán-Valley, L. F., Palma, A. J., & Martínez-Olmos, A. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.6b03901 · Cited by 97
Temporary On-Skin Passive UHF RFID Transfer Tag
Ziai, M. A., & Batchelor, J. C. (2011) · IEEE Transactions on Antennas and Propagation · doi:10.1109/tap.2011.2163789 · Cited by 96
Screen Printed Flexible Radiofrequency Identification Tag for Oxygen Monitoring
Martínez-Olmos, A., Salmerón, J. F., López-Ruiz, N., Rivadeneyra, A., Capitán-Vallvey, L. F., & Palma, A. J. (2013) · Analytical Chemistry · doi:10.1021/ac4028802 · Cited by 96
From Printed Transistors to Printed Smart Systems
Street, R. A., Ng, T. N., Schwartz, D. E., Whiting, G. L., Lu, J. P., Bringans, R. D., & Veres, J. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2408552 · Cited by 94
Printed Humidity Sensor With Memory Functionality for Passive RFID Tags
Gao, J., Sidén, J., Nilsson, H., & Gulliksson, M. (2013) · IEEE Sensors Journal · doi:10.1109/jsen.2013.2244034 · Cited by 93
Braam, K., & Subramanian, V. (2014) · Advanced Materials · doi:10.1002/adma.201404149 · Cited by 92
Kopsaftopoulos, F. P., Nardari, R., Li, Y.-H., et al. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.05.001 · Cited by 89
Transformational Silicon Electronics
Rojas, J. P., Sevilla, G. A. T., Ghoneim, M. T., Inayat, S. B., Ahmed, S., Hussain, A. M., & Hussain, M. M. (2014) · ACS Nano · doi:10.1021/nn405475k · Cited by 88
Shaikh, S. F., Mazo‐Mantilla, H. F., Qaiser, N., Khan, S. M., Nassar, J. M., Geraldi, N. R., Duarte, C. M., & Hussain, M. M. (2019) · Small · doi:10.1002/smll.201804385 · Cited by 85
Park, H., Kang, H., Lee, Y., Park, Y.-S., Noh, J., & Cho, G. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/34/344006 · Cited by 81
R2R gravure and inkjet printed RF resonant tag
Allen, M., Lee, C., Ahn, B.-J., Kololuoma, T. K., Shin, K., & Ko, S.-L. (2011) · Microelectronic Engineering · doi:10.1016/j.mee.2011.08.010 · Cited by 71
Fully printed flexible and disposable wireless cyclic voltammetry tag
Jung, Y., Park, H., Park, J., Noh, J., Choi, Y., Jung, M., Jung, K., Pyo, M., Chen, K., Javey, A., et al. (2015) · Scientific Reports · doi:10.1038/srep08105 · Cited by 71
An Innovative Diagnostic Film for Structural Health Monitoring of Metallic and Composite Structures
Bekas, D. G., Sharif-Khodaei, Z., & Aliabadi, M. H. F. (2018) · Sensors · doi:10.3390/s18072084 · Cited by 69
Koo, H., Lee, W., Choi, Y., Sun, J., Bak, J., Noh, J., Subramanian, V., Azuma, Y., Majima, Y., & Cho, G. (2015) · Scientific Reports · doi:10.1038/srep14459 · Cited by 67
Overview of Structural Health Monitoring for Steel Bridges
Modares, M., & Waksmanski, N. (2012) · Practice Periodical on Structural Design and Construction · doi:10.1061/(asce)sc.1943-5576.0000154 · Cited by 62
Kim, J.-H., Oh, D. K. S., & Kim, W. (2010) · IEEE Transactions on Advanced Packaging · doi:10.1109/tadvp.2010.2050204 · Cited by 59
Kang, H., Kitsomboonloha, R., Ulmer, K., Stecker, L. H., Grau, G., Jang, J., & Subramanian, V. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.10.005 · Cited by 56
Printed strain sensor array for application to structural health monitoring
Żymełka, D., Togashi, K., Ohigashi, R., Yamashita, T., Takamatsu, S., Itoh, T., & Kobayashi, T. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa8831 · Cited by 55
Active sensing and damage detection using piezoelectric zinc oxide-based nanocomposites
Meyers, F. N., Loh, K. J., Dodds, J. S., & Baltazar, A. (2013) · Nanotechnology · doi:10.1088/0957-4484/24/18/185501 · Cited by 54
Assembling surface mounted components on ink-jet printed double sided paper circuit board
Andersson, H. A., Manuilskiy, A., Haller, S., et al. (2014) · Nanotechnology · doi:10.1088/0957-4484/25/9/094002 · Cited by 49
Virkki, J., Wei, Z., Liu, A., Ukkonen, L., & Björninen, T. (2017) · International Journal of Antennas and Propagation · doi:10.1155/2017/3476017 · Cited by 49
Recent advances in organic optoelectronic devices for biomedical applications
Chen, Z., Obaid, S. N., & Lu, L. (2019) · Optical Materials Express · doi:10.1364/ome.9.003843 · Cited by 47
A Wearable Flexible Hybrid Electronics ECG Monitor
Poliks, M. D., Turner, J. N., Ghose, K., Jin, Z., Garg, M., Gui, Q., Arias, A. C., Kahn, Y., Schadt, M. J., & Egitto, F. D. (2016) · IEEE Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc.2016.395 · Cited by 41
Self-citationReinforced Electrode Architecture for a Flexible Battery with Paperlike Characteristics
Gaikwad, A. M., Chu, H. N., Qeraj, R., Zamarayeva, A. M., & Steingart, D. A. (2013) · Energy Technology · doi:10.1002/ente.201200027 · Cited by 40
Designing of RFID-Based Sensor Solution for Packaging Surveillance Applications
Unander, T., Sidén, J., & Nilsson, H. (2011) · IEEE Sensors Journal · doi:10.1109/jsen.2011.2155055 · Cited by 40
Lee, G.-Y., Kim, M., Yoon, H.-S., et al. (2017) · Procedia CIRP · doi:10.1016/j.procir.2017.03.279 · Cited by 38
Non-contact, radio frequency detection of ammonia with a printed polyaniline sensor
Clark, N. B., & Maher, L. J. (2009) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2009.03.011 · Cited by 37
Emission Area Patterning of Organic Light‐Emitting Diodes (OLEDs) via Printed Dielectrics
Han, D., Khan, Y., Gopalan, K., Pierre, A., & Arias, A. C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802986 · Cited by 36
Self-citationA silver inkjet printed ferrite NFC antenna
Pachler, W., Grosinger, J., Bösch, W., Holweg, G., Popovic, K., Blümel, A., & List, E. J. W. (2014) · Loughborough Antennas & Propagation Conference (LAPC) · doi:10.1109/lapc.2014.6996329 · Cited by 29
Fabrication and Characterization of Flexible Spray-Coated Antennas
Thielens, A., Deckman, I., Aminzadeh, R., Arias, A. C., & Rabaey, J. M. (2018) · IEEE Access · doi:10.1109/access.2018.2876286 · Cited by 28
Self-citationChen, X., Topac, T., Smith, W., Ladpli, P., Liu, C., & Chang, F. (2018) · Sensors · doi:10.3390/s18103260 · Cited by 27
Swisher, S. L., Volkman, S. K., & Subramanian, V. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00893 · Cited by 25
A flexible surface wetness sensor using a RFID technique
Yang, C.-H., Chien, J.-H., Wang, B.-Y., Chen, P., & Lee, D. (2007) · Biomedical Microdevices · doi:10.1007/s10544-007-9108-9 · Cited by 22
Silicon-on-Insulator (SOI) Wafer-Based Thin-Chip Fabrication
Burghartz, J. N. (2010) · Springer eBooks · doi:10.1007/978-1-4419-7276-7_7 · Cited by 3
Cited by
Technology Roadmap for Flexible Sensors
Luo, Y., Abidian, M. R., Ahn, J.-H., Akinwande, D., Andrews, A. M., Antonietti, M., Bao, Z., Berggren, M., Berkey, C. A., Bettinger, C. J., et al. (2023) · ACS Nano · doi:10.1021/acsnano.2c12606 · Cited by 1,383
Wearable and Stretchable Strain Sensors: Materials, Sensing Mechanisms, and Applications
Souri, H., Banerjee, H., Jusufi, A., Radacsi, N., Stokes, A. A., Park, I., Sitti, M., & Amjadi, M. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000039 · Cited by 681
Synthesis and alignment of liquid crystalline elastomers
Herbert, K. M., Fowler, H. E., McCracken, J. M., Schlafmann, K. R., Koch, J. A., & White, T. J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00359-z · Cited by 600
Flexible Electronics: Status, Challenges and Opportunities
Corzo, D., Tostado-Blázquez, G., & Baran, D. (2020) · Frontiers in Electronics · doi:10.3389/felec.2020.594003 · Cited by 391
3D printed electronics: Processes, materials and future trends
Tan, H. W., Choong, Y. Y. C., Kuo, C. N., Low, H. Y., & Chua, C. K. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100945 · Cited by 327
Metadata
- Authors
- Khan, Y., Thielens, A., Muin, S., Ting, J., Baumbauer, C., & Arias, A. C.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-11-19
- Volume
- 32
- Issue
- 15
- Pages
- e1905279-e1905279
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2991548490
- Cited by
- 891
- References
- 164
- FWCI
- 28.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.