The DOI matches its Crossref record; 162 of the 162 references it cites were found in a registry or an index.
3D‐Printed Anisotropic Polymer Materials for Functional Applications
Abstract
Anisotropy is the characteristic of a material to exhibit variations in its mechanical, electrical, thermal, optical properties, etc. along different directions. Anisotropic materials have attracted great research interest because of their wide applications in aerospace, sensing, soft robotics, and tissue engineering. 3D printing provides exceptional advantages in achieving controlled compositions and complex architecture, thereby enabling the manufacture of 3D objects with anisotropic functionalities. Here, a comprehensive review of the recent progress on 3D printing of anisotropic polymer materials based on different techniques including material extrusion, vat photopolymerization, powder bed fusion, and sheet lamination is presented. The state‐of‐the‐art strategies implemented in manipulating anisotropic structures are highlighted with the discussion of material categories, functionalities, and potential applications. This review is concluded with analyzing the current challenges and providing perspectives for further development in this field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Nature-inspired superwettability systems
Liu, M., Wang, S., & Jiang, L. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.36 · Cited by 1,726
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
Biomimetism and bioinspiration as tools for the design of innovative materials and systems
Sanchez, C., Arribart, H., & Giraud Guille, M. M. (2005) · Nature Materials · doi:10.1038/nmat1339 · Cited by 1,449
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Yang, C., Wang, Q., & Li, D. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.032 · Cited by 1,162
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Voxelated soft matter via multimaterial multinozzle 3D printing
Skylar-Scott, M. A., Mueller, J., Visser, C. W., & Lewis, J. A. (2019) · Nature · doi:10.1038/s41586-019-1736-8 · Cited by 1,024
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Dickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.06.004 · Cited by 792
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Self-citationFused filament fabrication of fiber-reinforced polymers: A review
Brenken, B., Barocio, E., Favaloro, A., Kunc, V., & Pipes, R. B. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.01.002 · Cited by 737
Nanofibrils in nature and materials engineering
Ling, S., Kaplan, D. L., & Buehler, M. J. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.16 · Cited by 730
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Jakus, A. E., Secor, E. B., Rutz, A. L., Jordan, S. W., Hersam, M. C., & Shah, R. N. (2015) · ACS Nano · doi:10.1021/acsnano.5b01179 · Cited by 710
Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
Li, N., Li, Y., & Liu, S. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.07.025 · Cited by 707
Composites Reinforced in Three Dimensions by Using Low Magnetic Fields
Erb, R. M., Libanori, R., Rothfuchs, N., & Studart, A. R. (2012) · Science · doi:10.1126/science.1210822 · Cited by 675
Multi‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
Muscle-like fatigue-resistant hydrogels by mechanical training
Lin, S., Liu, J., Liu, X., & Zhao, X. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1903019116 · Cited by 636
Self-citationRecent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
Printing, folding and assembly methods for forming 3D mesostructures in advanced materials
Zhang, Y., Zhang, F., Yan, Z., Ma, Q., Li, X., Huang, Y., & Rogers, J. A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.19 · Cited by 620
Goh, G. D., Dikshit, V., Nagalingam, A. P., Goh, G. L., Agarwala, S., Sing, S. L., Wei, J., & Yeong, W. Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.021 · Cited by 604
Melenka, G. W., Cheung, B. K. O., Schofield, J. S., Dawson, M. R., & Carey, J. P. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.07.018 · Cited by 597
Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
Siqueira, G., Kokkinis, D., Libanori, R., Hausmann, M. K., Gladman, A. S., Neels, A., Tingaut, P., Zimmermann, T., Lewis, J. A., & Studart, A. R. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604619 · Cited by 580
Grayscale digital light processing 3D printing for highly functionally graded materials
Kuang, X., Wu, J., Chen, K., Zhao, Z., Ding, Z., Hu, F., Fang, D., & Qi, H. J. (2019) · Science Advances · doi:10.1126/sciadv.aav5790 · Cited by 568
Self-citationAdvances in 3D printing of thermoplastic polymer composites and nanocomposites
Valino, A. D., Dizon, J. R. C., Espera, A. H., Chen, Q., Messman, J., & Advincula, R. C. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101162 · Cited by 565
Programming magnetic anisotropy in polymeric microactuators
Kim, J., Chung, S. E., Choi, S.-E., Lee, H., Kim, J., & Kwon, S. (2011) · Nature Materials · doi:10.1038/nmat3090 · Cited by 556
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
Polymeric composites for powder-based additive manufacturing: Materials and applications
Yuan, S., Shen, F., Chua, C. K., & Zhou, K. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.11.001 · Cited by 525
Self-citation3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens
Der Klift, F. V., Koga, Y., Todoroki, A., Ueda, M., Hirano, Y., & Matsuzaki, R. (2016) · Open Journal of Composite Materials · doi:10.4236/ojcm.2016.61003 · Cited by 516
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Martin, J. J., Fiore, B. E., & Erb, R. M. (2015) · Nature Communications · doi:10.1038/ncomms9641 · Cited by 515
3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
Yang, C., Tian, X., Liu, T., Cao, Y., & Li, D. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0098 · Cited by 515
Chacón, J. M., Caminero, M. Á., López, P. J. N., Plaza, E. G., García-Moreno, I., & Reverte, J. M. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107688 · Cited by 512
Characterization of 3D printed long fibre reinforced composites
Justo, J., Távara, L., García-Guzmán, L., & París, F. (2018) · Composite Structures · doi:10.1016/j.compstruct.2017.11.052 · Cited by 473
Caminero, M. A., Chacón, J. M., García-Moreno, I., & Reverte, J. M. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.04.038 · Cited by 421
Shape-shifting structured lattices via multimaterial 4D printing
Boley, J. W., van Rees, W. M., Lissandrello, C., Horenstein, M. N., Truby, R. L., Kotikian, A., Lewis, J. A., & Mahadevan, L. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1908806116 · Cited by 420
Torrado, A. R., Shemelya, C. M., English, J. D., Lin, Y., Wicker, R. B., & Roberson, D. A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.02.001 · Cited by 406
Three-dimensional printing of hierarchical liquid-crystal-polymer structures
Gantenbein, S., Masania, K., Woigk, W., Sesseg, J. P. W., Tervoort, T. A., & Studart, A. R. (2018) · Nature · doi:10.1038/s41586-018-0474-7 · Cited by 377
Bioinspired Nanocomposite Hydrogels with Highly Ordered Structures
Zhao, Z., Fang, R., Rong, Q., & Liu, M. (2017) · Advanced Materials · doi:10.1002/adma.201703045 · Cited by 368
Han, D., Morde, R. S., Mariani, S., La Mattina, A. A., Vignali, E., Yang, C., Barillaro, G., & Lee, H. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909197 · Cited by 360
Bhandari, S., Lopez-Anido, R. A., & Gardner, D. J. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100922 · Cited by 355
Self-assembly and applications of anisotropic nanomaterials: A review
Thorkelsson, K., Bai, P., & Xu, T. (2015) · Nano Today · doi:10.1016/j.nantod.2014.12.005 · Cited by 344
Multimaterial actinic spatial control 3D and 4D printing
Schwartz, J. J., & Boydston, A. J. (2019) · Nature Communications · doi:10.1038/s41467-019-08639-7 · Cited by 343
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
Hardin, J. O., Ober, T. J., Valentine, A. D., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500222 · Cited by 340
Additive manufacturing of multi-directional preforms for composites: opportunities and challenges
Quan, Z., Wu, A., Keefe, M., Qin, X., Yu, J., Suhr, J., Byun, J.-H., Kim, B.-S., & Chou, T.-W. (2015) · Materials Today · doi:10.1016/j.mattod.2015.05.001 · Cited by 324
Frketic, J., Dickens, T., & Ramakrishnan, S. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.01.003 · Cited by 322
Lewicki, J. P., Rodriguez, J. N., Zhu, C., Worsley, M. A., Wu, A. S., Kanarska, Y., Horn, J. D., Duoss, E. B., Ortega, J. M., Elmer, W., et al. (2017) · Scientific Reports · doi:10.1038/srep43401 · Cited by 318
Yang, Y., Chen, Z., Song, X., Zhang, Z., Zhang, J., Shung, K. K., Zhou, Q., & Chen, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605750 · Cited by 316
Liao, G., Li, Z., Cheng, Y., Xu, D., Zhu, D., Jiang, S., Guo, J., Chen, X., Xu, G., & Zhu, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.027 · Cited by 315
Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability
Yang, Y., Li, X., Chu, M., Sun, H., Jin, J., Yu, K., Wang, Q., Zhou, Q., & Chen, Y. (2019) · Science Advances · doi:10.1126/sciadv.aau9490 · Cited by 310
McIlroy, C., & Olmsted, P. D. (2017) · Polymer · doi:10.1016/j.polymer.2017.06.051 · Cited by 308
Active mixing of complex fluids at the microscale
Ober, T. J., Foresti, D., & Lewis, J. A. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509224112 · Cited by 306
Multi-material stereolithography
Choi, J.-W., Kim, H.-C., & Wicker, R. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.10.003 · Cited by 303
Rotational 3D printing of damage-tolerant composites with programmable mechanics
Raney, J. R., Compton, B. G., Mueller, J., Ober, T. J., Shea, K., & Lewis, J. A. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1715157115 · Cited by 301
3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties
Stepashkin, А. А., Chukov, D. I., Senatov, F. S., Salimon, A. I., Korsunsky, A. M., & Kaloshkin, S. D. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.05.032 · Cited by 293
Kishore, V., Ajinjeru, C., Nycz, A., Post, B., Lindahl, J., Kunc, V., & Duty, C. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.11.008 · Cited by 292
3D printed scaffolds with gradient porosity based on a cellulose nanocrystal hydrogel
Sultan, S., & Mathew, A. P. (2018) · Nanoscale · doi:10.1039/c7nr08966j · Cited by 285
Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R. (2018) · ACS Nano · doi:10.1021/acsnano.8b02366 · Cited by 282
Digital material fabrication using mask‐image‐projection‐based stereolithography
Zhou, C., Chen, Y., Yang, Z., & Khoshnevis, B. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311312148 · Cited by 267
On reducing anisotropy in 3D printed polymers via ionizing radiation
Shaffer, S., Yang, K., Vargas, J., Di Prima, M. A., & Voit, W. (2014) · Polymer · doi:10.1016/j.polymer.2014.07.054 · Cited by 261
Composite Hydrogels with Tunable Anisotropic Morphologies and Mechanical Properties
Chau, M., De France, K. J., Kopera, B., Machado, V. R., Rosenfeldt, S., Reyes, L., Chan, K. J. W., Förster, S., Cranston, E. D., Hoare, T., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00792 · Cited by 251
3D printing for the design and fabrication of polymer-based gradient scaffolds
Bracaglia, L. G., Smith, B. T., Watson, E., Arumugasaamy, N., Mikos, A. G., & Fisher, J. P. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.03.030 · Cited by 251
Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures
Velasco‐Hogan, A., Xu, J., & Meyers, M. A. (2018) · Advanced Materials · doi:10.1002/adma.201800940 · Cited by 247
Bittner, S. M., Smith, B. T., Diaz-Gomez, L., Hudgins, C. D., Melchiorri, A. J., Scott, D. W., Fisher, J. P., & Mikos, A. G. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.03.041 · Cited by 245
Spoerk, M., Savandaiah, C., Arbeiter, F., Traxler, G., Cardon, L., Holzer, C., & Sapkota, J. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.06.018 · Cited by 241
Peng, X., Kuang, X., Roach, D. J., Wang, Y., Hamel, C. M., Lu, C., & Qi, H. J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.101911 · Cited by 238
Self-citationYan, C., Hao, L., Xu, L., & Shi, Y. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.08.013 · Cited by 236
Self-citationMontazerian, H., Mohamed, M. G. A., Montazeri, M. M., Kheiri, S., Milani, A. S., Kim, K., & Hoorfar, M. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.06.040 · Cited by 232
Spoerk, M., Arbeiter, F., Cajner, H., Sapkota, J., & Holzer, C. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45401 · Cited by 227
Ravi, A. K., Deshpande, A., & Hsu, K. H. (2016) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.08.007 · Cited by 217
Han, D., Yang, C., Fang, N. X., & Lee, H. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.031 · Cited by 216
3D Printing of Materials with Tunable Failure via Bioinspired Mechanical Gradients
Kokkinis, D., Bouville, F., & Studart, A. R. (2018) · Advanced Materials · doi:10.1002/adma.201705808 · Cited by 212
3D Printing of Functional Magnetic Materials: From Design to Applications
Zhang, C., Li, X., Jiang, L., Tang, D., Xu, H., Zhao, P., Fu, J., Zhou, Q., & Chen, Y. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202102777 · Cited by 208
Biological and Bioinspired Composites with Spatially Tunable Heterogeneous Architectures
Studart, A. R. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300340 · Cited by 206
Ma, C., Wu, S., Ze, Q., Kuang, X., Zhang, R., Qi, H. J., & Zhao, R. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c13863 · Cited by 199
Self-citationA Stimuli‐Responsive Nanocomposite for 3D Anisotropic Cell‐Guidance and Magnetic Soft Robotics
Tognato, R., Armiento, A. R., Bonfrate, V., Levato, R., Malda, J., Alini, M., Eglin, D., Giancane, G., & Serra, T. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201804647 · Cited by 198
Nguyen, N. A., Barnes, S. H., Bowland, C. C., Meek, K. M., Littrell, K. C., Keum, J. K., & Naskar, A. K. (2018) · Science Advances · doi:10.1126/sciadv.aat4967 · Cited by 196
3D printing a mechanically-tunable acrylate resin on a commercial DLP-SLA printer
Borrello, J., Nasser, P., Iatridis, J. C., & Costa, K. D. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.08.019 · Cited by 193
Three-Dimensional Printing Fiber Reinforced Hydrogel Composites
Bakarich, S. E., Gorkin, R., in het Panhuis, M., & Spinks, G. M. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503878d · Cited by 192
Idaszek, J., Costantini, M., Karlsen, T. A., Jaroszewicz, J., Colosi, C., Testa, S., Fornetti, E., Bernardini, S., Seta, M., Kasarełło, K., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab2622 · Cited by 188
Fiber reinforcement during 3D printing
Christ, S., Schnabel, M., Vorndran, E., Groll, J., & Gbureck, U. (2015) · Materials Letters · doi:10.1016/j.matlet.2014.10.065 · Cited by 183
Yang, K., Grant, J. C., Lamey, P., Joshi‐Imre, A., Lund, B. R., Smaldone, R. A., & Voit, W. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700318 · Cited by 176
4D Printing of a Liquid Crystal Elastomer with a Controllable Orientation Gradient
Zhang, C., Lu, X., Fei, G., Wang, Z., Xia, H., & Zhao, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b18037 · Cited by 176
Lai, J., Ye, X., Liu, J., Wang, C., Li, J., Wang, X., Ma, M., & Wang, M. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109699 · Cited by 173
3D printing of continuous fiber-reinforced thermoset composites
He, X., Ding, Y., Lei, Z., Welch, S., Zhang, W., Dunn, M. L., & Yu, K. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101921 · Cited by 171
3D Printing‐Enabled Nanoparticle Alignment: A Review of Mechanisms and Applications
Xu, W., Jambhulkar, S., Ravichandran, D., Zhu, Y., Kakarla, M., Nian, Q., Azeredo, B., Chen, X., Jin, K., Vernon, B., et al. (2021) · Small · doi:10.1002/smll.202100817 · Cited by 168
Jia, Y., He, H., Geng, Y., Huang, B., & Peng, X. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.03.035 · Cited by 160
Xiong, W. H., Liu, Y., Jiang, L. J., Zhou, Y. S., Li, D. W., Jiang, L., Silvain, J., & Lu, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505516 · Cited by 159
Production of Materials with Spatially-Controlled Cross-Link Density via Vat Photopolymerization
Peterson, G. I., Schwartz, J. J., Zhang, D., Weiss, B. M., Ganter, M. A., Storti, D. W., & Boydston, A. J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09768 · Cited by 159
Wu, S., Hamel, C. M., Ze, Q., Yang, F., Qi, H. J., & Zhao, R. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000060 · Cited by 159
Self-citationAdditive Manufacturing of 3D Aerogels and Porous Scaffolds: A Review
Tetik, H., Wang, Y., Sun, X. H., Cao, D., Shah, N., Zhu, H., Qian, F., & Lin, D. L. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202103410 · Cited by 156
Directed and On‐Demand Alignment of Carbon Nanotube: A Review toward 3D Printing of Electronics
Goh, G. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201801318 · Cited by 155
Perovskite nanowire–block copolymer composites with digitally programmable polarization anisotropy
Zhou, N., Bekenstein, Y., Eisler, C. N., Zhang, D., Schwartzberg, A. M., Yang, P., Alivisatos, A. P., & Lewis, J. A. (2019) · Science Advances · doi:10.1126/sciadv.aav8141 · Cited by 149
Interfacial characteristics of composites fabricated by laminated object manufacturing
Klosterman, D., Chartoff, R. P., Graves, G., Osborne, N., & Priore, B. E. (1998) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(98)00088-8 · Cited by 142
Multimaterial Vat Polymerization Additive Manufacturing
Sampson, K. L., Deore, B., Go, A., Nayak, M. A., Orth, A., Gallerneault, M., Malenfant, P. R. L., & Paquet, C. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00262 · Cited by 140
Modular Elastomer Photoresins for Digital Light Processing Additive Manufacturing
Thrasher, C. J., Schwartz, J. J., & Boydston, A. J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13909 · Cited by 138
A general strategy of 3D printing thermosets for diverse applications
Lei, D., Yang, Y., Liu, Z., Chen, S., Song, B., Shen, A., Yang, B., Li, S., Yuan, Z., Qi, Q., et al. (2018) · Materials Horizons · doi:10.1039/c8mh00937f · Cited by 138
Printing Hydrogels and Elastomers in Arbitrary Sequence with Strong Adhesion
Yang, H., Li, C., Yang, M., Pan, Y., Yin, Q., Tang, J., Qi, H. J., & Suo, Z. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901721 · Cited by 136
Self-citationLaser assisted additive manufacturing of continuous fiber reinforced thermoplastic composites
Parandoush, P., Tucker, L., Zhou, C., & Lin, D. L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.013 · Cited by 128
Shemelya, C. M., Rosa, A. D. L., Perez, A. R. T., Yu, K., Domanowski, J., Bonacuse, P. J., Martin, R. E., Juhasz, M., Hurwitz, F. I., Wicker, R. B., et al. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.05.012 · Cited by 123
Programming Shape-Morphing Behavior of Liquid Crystal Elastomers via Parameter-Encoded 4D Printing
Ren, L., Li, B., He, Y., Song, Z., Zhou, X., Liu, Q., & Ren, L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c00027 · Cited by 121
3-D printing of multifunctional carbon nanotube yarn reinforced components
Gardner, J. M., Sauti, G., Kim, J.-W., et al. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.008 · Cited by 116
Hierarchical chemomechanical encoding of multi-responsive hydrogel actuators via 3D printing
Odent, J., Vanderstappen, S., Toncheva, A., Pichon, E., Wallin, T. J., Wang, K., Shepherd, R. F., Dubois, P., & Raquez, J.-M. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta03547h · Cited by 115
Chen, K., Zhang, L., Kuang, X., Li, V., Lei, M., Kang, G., Wang, Z. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903568 · Cited by 114
Self-citationExtrusion-Based 3D Printing of Poly(propylene fumarate) in a Full-Factorial Design
Trachtenberg, J. E., Placone, J. K., Smith, B. T., Piard, C., Santoro, M., Scott, D. W., Fisher, J. P., & Mikos, A. G. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00026 · Cited by 113
3D printing of carbon fiber-filled conductive silicon rubber
Huang, P., Xia, Z., & Cui, S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.12.051 · Cited by 110
Chueh, Y., Wei, C., Zhang, X., & Li, L. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100928 · Cited by 109
Understanding anisotropy and architecture in ice-templated biopolymer scaffolds
Pawelec, K. M., Husmann, A., Best, S. M., & Cameron, R. E. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.01.009 · Cited by 106
Greenhall, J., & Raeymaekers, B. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700122 · Cited by 101
Allum, J., Moetazedian, A., Gleadall, A., & Silberschmidt, V. V. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101297 · Cited by 101
Review of Heat Exchangers Enabled by Polymer and Polymer Composite Additive Manufacturing
Deisenroth, D. C., Moradi, R., Shooshtari, A. H., Singer, F., Bar‐Cohen, A., & Ohadi, M. M. (2017) · Heat Transfer Engineering · doi:10.1080/01457632.2017.1384280 · Cited by 100
Niendorf, K., & Raeymaekers, B. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202001002 · Cited by 100
Vat Photopolymerization 3D Printing of Nanocomposites: A Literature Review
Medellin, A., Du, W., Miao, G., Zou, J. T., Pei, Z., & Ma, C. (2019) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4044288 · Cited by 99
Planar deposition flow modeling of fiber filled composites in large area additive manufacturing
Heller, B. P., Smith, D. E., & Jack, D. A. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.031 · Cited by 98
3D printing of tough hydrogel composites with spatially varying materials properties
Bakarich, S. E., Gorkin, R. A., III, Gately, R. D., Naficy, S., Panhuis, M. I. H., & Spinks, G. M. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.12.003 · Cited by 96
Printed Nanocomposite Energy Harvesters with Controlled Alignment of Barium Titanate Nanowires
Malakooti, M. H., Julé, F., & Sodano, H. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13643 · Cited by 95
Zaheri, A., Fenner, J. S., Russell, B. P., Restrepo, D., Daly, M., Wang, D., Hayashi, C. Y., Meyers, M. A., Zavattieri, P. D., & Espinosa, H. D. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803073 · Cited by 94
Multi-material, multi-technology stereolithography
Wicker, R. B., & MacDonald, E. W. (2012) · Virtual and Physical Prototyping · doi:10.1080/17452759.2012.721119 · Cited by 93
Zhuang, Y., Song, W., Ning, G., Sun, X., Sun, Z., Xu, G., Zhang, B., Chen, Y., & Tao, S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.047 · Cited by 89
Haring, A. P., Tong, Y., Halper, J., & Johnson, B. N. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800213 · Cited by 88
Shear induced alignment of short nanofibers in 3D printed polymer composites
Yunus, D. E., Shi, W., Sohrabi, S., et al. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/49/495302 · Cited by 87
3D printing of novel osteochondral scaffolds with graded microstructure
Nowicki, M. A., Castro, N. J., Plesniak, M. W., et al. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/41/414001 · Cited by 86
Acoustic patterning for 3D embedded electrically conductive wire in stereolithography
Yunus, D. E., Sohrabi, S., He, R., et al. (2017) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/aa62b7 · Cited by 85
Zhou, X., Tenaglio, S., Esworthy, T. J., Hann, S.-Y., Cui, H., Webster, T. J., Fenniri, H., & Zhang, L. G. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c07918 · Cited by 83
Anisotropy, homogeneity and ageing in an SLS polymer
Cooke, W., Tomlinson, R. A., Burguete, R. L., Johns, D., & Vanard, G. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111138397 · Cited by 82
Recent progress in field-assisted additive manufacturing: materials, methodologies, and applications
Hu, Y. (2020) · Materials Horizons · doi:10.1039/d0mh01322f · Cited by 82
Zhang, M., Wang, Y., Jian, M., Wang, C., Liang, X., Niu, J., & Zhang, Y. (2020) · Advanced Science · doi:10.1002/advs.201903048 · Cited by 81
Levenhagen, N. P., & Dadmun, M. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00051 · Cited by 73
High thermal conductive epoxy based composites fabricated by multi-material direct ink writing
Liu, J., Guo, Y., Weng, C., Zhang, H., & Zhang, Z. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105684 · Cited by 71
Zhang, M., Guo, R., Chen, K., Wang, Y., Niu, J., Guo, Y., Zhang, Y., Yin, Z., Xia, K., Zhou, B., et al. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2003079117 · Cited by 70
Shape‐Memory Balloon Structures by Pneumatic Multi‐material 4D Printing
Zhang, Q., Kuang, X., Weng, S., Yue, L., Roach, D. J., Fang, D., & Qi, H. J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010872 · Cited by 70
Self-citationFatigue crack growth of SLS polyamide 12: Effect of reinforcement and temperature
Salazar, A., Rico, A., Rodríguez, J., et al. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.12.017 · Cited by 68
Direct Laser Writing of 3D Architectures of Aligned Carbon Nanotubes
Ushiba, S., Shoji, S., Masui, K., Kono, J., & Kawata, S. (2014) · Advanced Materials · doi:10.1002/adma.201400783 · Cited by 67
3D printing of materials with spatially non-linearly varying properties
Ren, L., Song, Z., Liu, H., Han, Q., Zhao, C., Derby, B., Liu, Q., & Ren, L. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.012 · Cited by 67
Fang, Y., Zhang, T., Zhang, L., Gong, W., & Sun, W. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0fd3 · Cited by 66
John, J. V., McCarthy, A. D., Wang, H., Luo, Z., Li, H., Wang, Z., Cheng, F., Zhang, Y. S., & Xie, J. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100238 · Cited by 66
Active Mixing of Disparate Inks for Multimaterial 3D Printing
Ortega, J. M., Golobic, M., Sain, J. D., Lenhardt, J. M., Wu, A. S., Fisher, S., Pérez, L. X. P., Jaycox, A. W., Smay, J. E., Duoss, E. B., et al. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800717 · Cited by 65
Flexible Conductive Composites with Programmed Electrical Anisotropy Using Acoustophoresis
Melchert, D. S., Collino, R. R., Ray, T. R., Dolinski, N. D., Friedrich, L. M., Begley, M. R., & Gianola, D. S. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900586 · Cited by 58
4D Printing of Glass Fiber-Regulated Shape Shifting Structures with High Stiffness
Weng, S., Kuang, X., Zhang, Q., Hamel, C. M., Roach, D. J., Hu, N., & Qi, H. J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18988 · Cited by 58
Self-citationLiu, X., Tey, W. S., Choo, J. Y. C., Chen, J., Tan, P., Cai, C., Ong, A. C. Y., Zhao, L., & Zhou, K. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102205 · Cited by 57
Self-citationSalmoria, G. V., Klauss, P., Zepon, Κ. M., Κanis, L. A., Roesler, C. R. D. M., & Vieira, L. F. (2012) · Virtual and Physical Prototyping · doi:10.1080/17452759.2012.687911 · Cited by 52
Additive Manufacturing of Silicone Composites for Soft Actuation
Miriyev, A., Xia, B., Joseph, J. C., & Lipson, H. (2019) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2019.0116 · Cited by 52
Holmes, L. R., & Riddick, J. C. (2013) · JOM · doi:10.1007/s11837-013-0828-4 · Cited by 50
Lai, C. Q., Markandan, K., Luo, B., Lam, Y. C., Chung, W. C., & Chidambaram, A. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101721 · Cited by 49
Tetik, H., Zhao, K., Shah, N., & Lin, D. L. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.05.051 · Cited by 46
Recoverable Photolithographic Patterning for Polarized Display and Encryption
Xu, L., Feng, Y., Yu, D., Zheng, Z., Chen, X., & Hong, W. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000373 · Cited by 40
Anwer, A., & Naguib, H. E. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.05.013 · Cited by 38
3D printing of structural gradient soft actuators by variation of bioinspired architectures
Ren, L., Li, B., Song, Z., Liu, Q., Ren, L., & Zhou, X. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03344-8 · Cited by 37
Scaling relationships for acoustic control of two-phase microstructures during direct-write printing
Collino, R. R., Ray, T. R., Friedrich, L. M., Cornell, J. D., Meinhart, C. D., & Begley, M. R. (2018) · Materials Research Letters · doi:10.1080/21663831.2018.1431317 · Cited by 33
NAKAMOTO, T., & KOJIMA, S. (2012) · Journal of Advanced Mechanical Design Systems and Manufacturing · doi:10.1299/jamdsm.6.849 · Cited by 27
Controllable helical deformations on printed anisotropic composite soft actuators
Wang, D., Li, L., Serjouei, A., Dong, L., Weeger, O., Gu, G., & Ge, Q. (2018) · Applied Physics Letters · doi:10.1063/1.5025370 · Cited by 25
CFPC material characteristics and SLS prototyping process
Floersheim, R., Hou, G., & Firestone, K. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910993860 · Cited by 22
Wu, D. J., Vonk, N. H., Lamers, B. A. G., Castilho, M. D., Malda, J., Hoefnagels, J. P. M., & Dankers, P. Y. W. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.110099 · Cited by 21
Patterned, morphing composites via maskless photo-click lithography
Lyu, S., Zheng, F., Aguilar-Tadeo, J. A., Lin, F., Wu, R., Derby, B., Kinloch, I. A., Soutis, C., Grésil, M., & Blaker, J. J. (2020) · Soft Matter · doi:10.1039/c9sm02056j · Cited by 3
Cited by
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
3D-printed PEDOT:PSS for soft robotics
Li, J., Cao, J., Lu, B., & Gu, G. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00587-5 · Cited by 274
Metadata
- Authors
- Chen, J., Liu, X., Tian, Y., Zhu, W., Yan, C., Shi, Y., Kong, L. B., Qi, H. J., & Zhou, K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2021-12-16
- Volume
- 34
- Issue
- 5
- Pages
- e2102877-e2102877
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3210845004
- Cited by
- 281
- References
- 162
- FWCI
- 13.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.