3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Open accessThe DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
Generation of thick vascularized tissues that fully match the patient still remains an unmet challenge in cardiac tissue engineering. Here, a simple approach to 3D‐print thick, vascularized, and perfusable cardiac patches that completely match the immunological, cellular, biochemical, and anatomical properties of the patient is reported. To this end, a biopsy of an omental tissue is taken from patients. While the cells are reprogrammed to become pluripotent stem cells, and differentiated to cardiomyocytes and endothelial cells, the extracellular matrix is processed into a personalized hydrogel. Following, the two cell types are separately combined with hydrogels to form bioinks for the parenchymal cardiac tissue and blood vessels. The ability to print functional vascularized patches according to the patient's anatomy is demonstrated. Blood vessel architecture is further improved by mathematical modeling of oxygen transfer. The structure and function of the patches are studied in vitro, and cardiac cell morphology is assessed after transplantation, revealing elongated cardiomyocytes with massive actinin striation. Finally, as a proof of concept, cellularized human hearts with a natural architecture are printed. These results demonstrate the potential of the approach for engineering personalized tissues and organs, or for drug screening in an appropriate anatomical structure and patient‐specific biochemical microenvironment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The fact that macroscale contractile function has not yet been achieved in a 3D printed, perfusable, chambered heart model reflects the challenges associated with handling mature cardiac muscle cells.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Yet, inclusion of contiguous, living muscle to support pump function has not been achieved.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Multiple studies have demonstrated the capacity to print entire heart organ models using biological materials, but the resulting constructs have either lacked cells8, 9 or evidence of electromechanical function18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heart Disease and Stroke Statistics—2017 Update: A Report From the American Heart Association
Benjamin, E. J., Blaha, M. J., Chiuve, S. E., Cushman, M., Das, S. R., Deo, R., de Ferranti, S. D., Floyd, J., Fornage, M., Gillespie, C., et al. (2017) · Circulation · doi:10.1161/cir.0000000000000485 · Cited by 12,591
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Lian, X., Hsiao, C., Wilson, G., Zhu, K., Hazeltine, L. B., Azarin, S. M., Raval, K. K., Zhang, J., Kamp, T. J., & Palecek, S. P. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1200250109 · Cited by 1,717
Scaffolding in tissue engineering: general approaches and tissue-specific considerations
Chan, B. P., & Leong, K. W. (2008) · European Spine Journal · doi:10.1007/s00586-008-0745-3 · Cited by 1,708
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Nanotechnological strategies for engineering complex tissues
Dvir, T., Timko, B. P., Kohane, D. S., & Langer, R. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.246 · Cited by 1,367
Self-citation
Research works printed but not linked: 1
- Members W. G., 2017, Circulation, 135, e146
Cited by
Items 901–1,000 of 1,000
Three-dimensional Printing and Modeling in Interventional Cardiology: A Comprehensive Review
Huang, H. Y. R., Tayyab, H., Khan, A. A., Shah, U., Anantharaj, R. M., Rajak, K., Jiffry, R., Kantawala, B., Nasser, J. S., Shariff, S., et al. (2023) · Annals of Clinical Cardiology · doi:10.4103/accj.accj_20_23 · Cited by 2
Nguyen, T. D., Nguyen, T.-Q., Toi, V. V., & Nguyen, T.-H. (2025) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2024.2449294 · Cited by 2
Demeterová, J., Trebuňová, M., & Bačenková, D. (2024) · Acta Mechanica Slovaca · doi:10.21496/ams.2024.019 · Cited by 2
Facile Fabrication of Three-Dimensional Hydrogel Film with Complex Tissue Morphology
An, Y., & Kim, S. (2021) · Bioengineering · doi:10.3390/bioengineering8110164 · Cited by 2
Roßmann, M., Schneider, C., Leshkovych, M., & Lösch, A. (2021) · Repository KITopen (Karlsruhe Institute of Technology) · doi:10.5445/ir/1000140561 · Cited by 2
Past and Future Prevascularization Strategies with Clinical Relevance: Leading to a Dual Approach
Schneider, K. H., Rohringer, S., Holnthoner, W., Mühleder, S., & Redl, H. R. (2021) · Reference series in biomedical engineering · doi:10.1007/978-3-319-54586-8_11 · Cited by 2
Chopra, K., Pawar, S. V., Maurya, M., Gupta, T., & Dhaliwal, J. (2022) · Springer eBooks · doi:10.1007/978-981-16-4345-3_15 · Cited by 2
Inovação do tratamento da estenose aórtica utilizando a impressão 3D
Borges, G. H. I., Zendron, I. M., Vaz, M. H. V., Macedo, R. M., Garcia, T. ́., Teixeira, L. S., Nascimento, D. G. D., Alvares, L. E. M. D. B., Resplande, C. A., Oliveira, A. L. S., et al. (2022) · Research Society and Development · doi:10.33448/rsd-v11i14.35450 · Cited by 2
Updates in the Use of 3D Bioprinting in Biomedical Engineering for Clinical Application: A Review
Al-Mansour, A. H. M., Rizk, A. N. G. A., Al-Mansour, H. M. S., Mahamed, H. S. F. A., Sharmah, H. S. M. A., Al-mahamed, A. M., Al-hattab, J. M., & Almansour, F. M. H. (2022) · Journal of Pharmaceutical Research International · doi:10.9734/jpri/2022/v34i587263 · Cited by 2
Principles of cardiovascular tissue engineering
Chen, S., & Cohen, S. (2023) · Elsevier eBooks · doi:10.1016/b978-0-12-824459-3.00018-4 · Cited by 2
Abutalipov, R. N. (2022) · News of the Kabardin-Balkar Scientific Center of RAS · doi:10.35330/1991-6639-2022-6-110-28-38 · Cited by 2
3D Printing of Multicomponent Hydrogels for Biomedical Applications
Zhou, D., Wang, C., Hert, A., Yan, L., Dou, B., & Ouyang, L. (2023) · Royal Society of Chemistry eBooks · doi:10.1039/bk9781837670055-00231 · Cited by 2
Hardness and modulus programmable tuning for silicone 3D printing device and experiment
Jiao, Z., Zhuang, Z., Hu, L., Sun, C., Yu, Y., & Yang, W. (2023) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2022-0179 · Cited by 2
Cardiac tissue engineering for the treatment of hypoplastic left heart syndrome (HLHS)
Abraham, R. J., Vricella, L. A., & Hibino, N. (2023) · Translational Pediatrics · doi:10.21037/tp-23-127 · Cited by 2
Teli, A., Sandip, M., Hoque, N., & Kumar, G. M. (2023) · International Journal of Zoological Investigations · doi:10.33745/ijzi.2023.v09i02.093 · Cited by 2
Fabricating a new heart: One step closer to reality
Han, L. (2019) · Science Translational Medicine · doi:10.1126/scitranslmed.aax4870 · Cited by 2
Chartrain, N. A. (2019) · VTechWorks (Virginia Tech) · Cited by 2
Freeform printing of heterotypic tumor models within cell-laden microgel matricesPreprint
Molley, T. G., Jalandhra, G. K., Nemec, S. R., Tiffany, A. S., Harley, B. A. C., Hung, T., & Kilian, K. A. (2020) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2020.08.30.274654 · Cited by 2
Recent Advancements and Trends in 3D Printing for Biomedical ApplicationsPreprint
Hsu, C., Williams, T., & Yu, X. (2023) · ChemRxiv · doi:10.26434/chemrxiv-2023-03c1m · Cited by 2
A phase diagram of the pinch-off-type behavior of impulsively-induced viscoelastic liquid jetsPreprint
Hosokawa, A., Kamamoto, K., Watanabe, H., Kusuno, H., KOBAYASHI, K. G., & Tagawa, Y. (2023) · Research Square · doi:10.21203/rs.3.rs-3314110/v1 · Cited by 2
Bouguéon, G. (2020) · theses.fr (ABES) · doi:10.70675/a84bc84ez8600z44dazb1cbz5935c11b57d8 · Cited by 2
Growth and Mechanics of Cellular Structures : Continuous Models for Tissue Growth
Ackermann, J. (2022) · theses.fr (ABES) · doi:10.70675/775fa1e9z559cz46b4z8c0cz359a6b956498 · Cited by 2
USAGE OF 3D PRINTER TECHNOLOGY IN MEDICAL AND PHARMACEUTICAL FIELDS: A REVIEW
BESKAN, U., & Yapar, E. A. (2019) · Universal Journal of Pharmaceutical Research · doi:10.22270/ujpr.v4i3.277 · Cited by 1
Elgin, S., Silberman, E., Shapira, A., & Dvir, T. (2024) · Gels · doi:10.3390/gels10080515 · Cited by 1
Self-citationArtificial Tissues and Organs: Revolutionizing and Pioneering the Future of Medicine and Healthcare
Yadav, M., Kumar, A., & Verma, G. C. (2024) · Biomedical materials for multi-functional applications · doi:10.1007/978-981-97-5456-4_7 · Cited by 1
Hemaid, S., & bayoumy, H. E. F. (2025) · Journal of Laser Science and Applications · doi:10.21608/jlsa.2025.345137.1025 · Cited by 1
3D printed hydrogels: A promising material for biomedical applications
Bickerstaff, E., Mehdi-Sefiani, H., Chicardi, E., Sepúlveda, R., Puyana, V. M. P., Adhami, M., Larrañeta, E., & Domínguez‐Robles, J. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-22017-3.00008-1 · Cited by 1
Regenerative medicine and congenital heart diseases: Current approaches and future directions
Sanli, B., & Dastourı, M. (2024) · Biomedicine Advances · doi:10.34172/bma.02 · Cited by 1
Li, B., Miao, C., Lu, X., Chang, Z., Wang, Y., Wang, D., Huo, Y., Cao, Y., Zhou, G., Hua, Y., et al. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.162441 · Cited by 1
Sakaguchi, K., NAKAZONO, K., Tahara, K., Hinata, Y., Tobe, Y., Homma, J., Sekine, H., Matsuura, K., Iwasaki, K., Tsuneda, S., et al. (2025) · Biofabrication · doi:10.1088/1758-5090/adcb6e · Cited by 2
Multimaterial printing for medical design
Renter, W. J., Habib, A. K. M. A., Khalil, M., Tomori, M., Khatri, N. R., & Egan, P. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29228-6.00017-7 · Cited by 1
Integration of Innovative Materials and Biotechnology in Joint Repair and Regeneration
Chen, J., Xu, A., Yang, Z., Wu, M., Song, C., Zhou, J. W., Tang, J., & Zhang, Y. (2025) · Modern Health Science · doi:10.30560/mhs.v8n2p142 · Cited by 1
Motamed, P. K., Kohandel, M., Poudineh, M., & Maftoon, N. (2025) · Comput. Biol. Medicine · doi:10.1016/j.compbiomed.2025.110933 · Cited by 1
Cartaxo, M. C. B., & Cartaxo, M. S. B. (2025) · Editora Studies Publicações eBooks · doi:10.54033/stebook.978-65-83309-29-7_24 · Cited by 1
Pfarr, J., Zitta, K., Lutter, G., Tiwari, S., Mohamad, F. H., Knueppel, P., Lichte, F., Heß, K., Preuß, M., Debus, E. S., et al. (2025) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-025-06967-3 · Cited by 1
Rezayof, O., Javazm, M. R., Kulkarni, Y., Kamaraj, M., Tilton, M., John, J. V., & Alambeigi, F. (2025) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros60139.2025.11245956 · Cited by 1
Challenges and opportunities for cardiac organoids: A comprehensive review
Xiao, Y., Zhuang, Z., Shi, X., & Wu, F. (2025) · Regenesis repair rehabilitation. · doi:10.1016/j.rerere.2025.12.004 · Cited by 1
(2025) · International Journal of Corrosion and Scale Inhibition · doi:10.17675/2305-6894-2025-14-4-10 · Cited by 1
Triple helix formation of a collagen model peptide induces cell aggregation formation
Yoshida, K., Vermeersch, E., Vlierberghe, S. V., & Matsusaki, M. (2026) · Biochemical and Biophysical Research Communications · doi:10.1016/j.bbrc.2026.153272 · Cited by 1
Panahi, B., Dababneh, S., Fadaei, S. S., Babini, H., Singh, S., Prondzynski, M., Akbari, M., Backx, P. H., Andrade, J. G., Rose, R. A., et al. (2026) · Cells · doi:10.3390/cells15020187 · Cited by 1
Dynamic Modulation of the Microenvironment Promotes Functional Maturation of Engineered Tissues
Silberman, E., Oved, H., Gil, I., Marzook, A., Baruch, E., Shechter, Y., Shapira, A., & Dvir, T. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.202504573 · Cited by 1
Self-citationImpact-induced viscoelastic bungee-jumper jets with uniform extension and stress
Kamamoto, K., Hosokawa, A., & Tagawa, Y. (2026) · Applied Physics Letters · doi:10.1063/5.0320061 · Cited by 1
Anionic Polysaccharides: Promising 3D Bioink Candidates for Tissue Engineering
Wang, F., Elboutachfaiti, R., Cabrera-Barjas, G., & Delattre, C. (2026) · Bioengineering · doi:10.3390/bioengineering13040408 · Cited by 1
Yuan, Y., Anwar-Fadzil, A.-F., Choi, H. W. C., Jeon, T., Hu, Y., Wu, J., Kachouie, N. N., & Kang, L. (2026) · Biofabrication · doi:10.1088/1758-5090/ae6ad0 · Cited by 1
Additive Manufacturing of Engineered Tissue Constructs: Current Strategies and Future Directions
Prosekov, A. Y., Titarenko, D. V., Kurbanova, M. G., Smolovskaya, O., & Kozlova, O. V. (2026) · Bioengineering · doi:10.3390/bioengineering13050562 · Cited by 1
Recent advances in bioprinted organoids: Methods, applications and future perspectives
Li, Z., Li, X., Zhang, L., Song, X., Ding, Y., Li, K., Liu, K., Qu, H., Liu, Z., Gao, Y., et al. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.178478 · Cited by 1
Jiang, C., Cui, P., & Gong, L. (2026) · Vascular Pharmacology · doi:10.1016/j.vph.2026.107683 · Cited by 1
Advancing functional vascular reconstruction through 3D printing strategies
Tan, Y., Li, Y., Chai, M., & Shi, X. (2026) · Science China Materials · doi:10.1007/s40843-026-4251-2 · Cited by 1
Mansi, S., Halbherr, S., Möller, F., Ernst, A. L., Bauer, S., Kuznetsova, Z., Samsarelou, M. K., Rickert, C. A., Heinrich, D., Zhong, Z., et al. (2026) · Small Science · doi:10.1002/smsc.70371 · Cited by 1
Designing Tissue Function Through Embedded Bioprinting Architectures
Li, Q., Cao, Y., Lin, J., Yang, H., & Zhou, H. (2026) · Advanced Science · doi:10.1002/advs.77342 · Cited by 1
Tavakol, D. N., Mendonca, D., Baldassarri, I., Maletić‐Savatić, M., & Vunjak‐Novakovic, G. (2026) · Cell stem cell · doi:10.1016/j.stem.2026.10.003 · Cited by 1
Advances in tissue engineering of the cardiac muscle for myocardial regeneration
de Granada, E. D. L. F. D. M. U., & Ruiz-de-Almirón-de-Andrés, B. (2020) · ACTUALIDAD MEDICA · doi:10.15568/am.2020.809.re01 · Cited by 1
NASSIN KAPSAMADIĞI MESELELER VE ŞER’Î HÜKÜM TANIMI
Bakti, A. S. (2021) · Dinbilimleri Akademik Araştırma Dergisi · doi:10.33415/daad.850629 · Cited by 1
Research Progress on Tissue Engineering of Main Tissues and Organs of Human Body
Jin, Z. (2021) · E3S Web of Conferences · doi:10.1051/e3sconf/202124503043 · Cited by 1
Highly anisotropic magneto responsive SU8/Fe ink for additive manufacturing
Akdogan, N. G., Odeh, Y. N., Alshammari, H. A., Zırhlı, O., & Akdoğan, O. (2021) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2021.168526 · Cited by 1
Introduction to 3D Printing Technology for Biomedical Applications
Kumar, S., Bendi, R., & Kumar, V. (2021) · Gels horizons: from science to smart materials · doi:10.1007/978-981-16-4667-6_1 · Cited by 1
Liquid Support Bath–Assisted 3 D Bioprinting
Hua, W., Godina, B., & Jin, Y. (2021) · Wiley eBooks · doi:10.1002/9783527828593.ch7 · Cited by 1
Analysing Genetic Programs of Cell Differentiation to Study Cardiac Cell Diversification
Wu, Z., Shen, S., Sun, Y., Werner, T., Bradford, S. T., & Palpant, N. J. (2022) · Springer eBooks · doi:10.1007/978-3-030-86140-7_8 · Cited by 1
Toxicity Testing In Vitro: Regulatory Aspects
von Keutz, E. (2021) · Springer eBooks · doi:10.1007/978-3-030-57499-4_35 · Cited by 1
A Parameter Optimization Method of 3D Printing Soft Materials for Soft Robots
Guo, A., Zhang, W., Zhang, Y., Sun, L., & Jin, G. (2022) · Lecture notes in computer science · doi:10.1007/978-3-031-13822-5_30 · Cited by 1
3D bioprinting: overview and recent developments
Kulkarni, R., & Pandya, A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-90984-6.00007-6 · Cited by 1
Recent advances in biological pumps as a building block for bioartificial hearts
Brimmer, S., Ji, P., Birla, A. K., Keswani, S. G., Caldarone, C. A., & Birla, R. K. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1061622 · Cited by 1
Bioprinting of other tissues and organs
Wu, Y. B., Fuh, J. Y. H., & Ozbolat, I. T. (2023) · Elsevier eBooks · doi:10.1016/b978-0-12-824291-9.00001-4 · Cited by 1
Potential applications of 3D and 4D printing of biopolymers
Ng, W. L., & Yeong, W. Y. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95151-7.00012-0 · Cited by 1
Hussein, Z. M., & Al-Barwary, M. R. A. (2023) · Science Journal of University of Zakho · doi:10.25271/sjuoz.2023.11.2.1007 · Cited by 1
García, C., & Blanco, M. (2023) · ANALES RANM · doi:10.32440/ar.2023.140.02.rev06 · Cited by 1
Silk for cardiac tissue engineering
Engel, F. B. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-96017-5.00003-0 · Cited by 1
Wang, Z., Wang, W., Liu, J., & Yang, J. Q. (2024) · Springer eBooks · doi:10.1007/978-981-19-7712-1_10 · Cited by 1
Vascularization of organoids in microfluidic chips
Chowdary, P., Yadav, D. N., Pogu, S. V., & Rengan, A. K. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13782-2.00016-4 · Cited by 1
State of the art in Purkinje bioengineering
Birla, R. K. (2024) · Tissue and Cell · doi:10.1016/j.tice.2024.102467 · Cited by 1
Additive Manufacturing of Bio-implants
Sharma, S., Jain, A., Gupta, V., & Mudgal, D. (2024) · Biomedical materials for multi-functional applications · doi:10.1007/978-981-97-5456-4_3 · Cited by 1
Cardiac Tissue Engineering: A Pathway for Repair
Hortensius, R. A., Lin, W., Fontenot, J. F., Ogle, B. M., & Jung, J. P. (2024) · Springer eBooks · doi:10.1007/978-3-031-71067-4_15 · Cited by 1
Tripathi, S., Ansari, A. A., Dash, M., Jain, P. K., Singh, H., Ramakrishna, S., & Nanda, H. S. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-16168-1.00017-9 · Cited by 1
Hydrogels for cardiac tissue regeneration
Beena, M., & Palaniappan, A. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29260-6.00009-3 · Cited by 1
Human iPSC-Based in Vitro Cardiovascular Tissue Models for Drug Screening Applications
Anand, S., Chen, G., Khanna, A., & Huang, N. F. (2025) · Current Cardiology Reports · doi:10.1007/s11886-025-02284-x · Cited by 2
Mapping the trajectory of organoid research: Insights into complex models and advanced technologies
Zhang, Y., Wang, L., Zhao, Q., Gong, J., Tian, Y., Liu, Y., Chen, S., Zhao, X. J., Yang, Q., & Zhao, Y. (2025) · Engineered Regeneration · doi:10.1016/j.engreg.2025.11.003 · Cited by 1
Novak, H., & Novak, O. (2024) · International Archives of Biomedicine, Life sciences and Bioengineering · doi:10.5281/zenodo.19542644 · Cited by 1
Toxicity Testing In Vitro. Regulatory Aspects
von Keutz, E. (2021) · Springer eBooks · doi:10.1007/978-3-642-36206-4_35-2 · Cited by 1
Commentary: Charting the path to a functional bioengineered heart
Mazine, A., & Rao, V. A. (2019) · Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2019.07.042 · Cited by 1
Provision of safe donor pigs for xenotransplantation
Egerer, S. (2020) · Electronic Theses of LMU Munich (Ludwig-Maximilians-Universität München) · doi:10.5282/edoc.25787 · Cited by 1
An Integrated Approach to Three-Dimensional Bioprinting at Subfreezing Temperatures
Ukpai, G. (2020) · eScholarship (California Digital Library) · Cited by 1
Than, Y. M. (2020) · Chula Digiverse · doi:10.58837/chula.the.2020.378 · Cited by 1
Additive manufacturing in the biomedical field: current status and future prospects
Dobado-Lopez, D., & Guerrero‐Vaca, G. (n.d.) · Biomechanica Hungarica · doi:10.17489/biohun/2023/1/570 · Cited by 1
Flandes‐Iparraguirre, M. (2023) · Depósito Académico Digital Universidad de Navarra (University of Navarra) · doi:10.15581/10171/69152 · Cited by 1
Smith, J. (2021) · Figshare · doi:10.26174/thesis.lboro.14416346 · Cited by 1
Bruère de Carvalho Paiva, V. M., Lion, A., Holtmannspötter, J., & Deutschland (2023) · Cited by 1
Adaptive and Reconfigurable Architected Materials Driven by Electrochemistry
Xia, X. (2019) · CaltechTHESIS (California Institute of Technology) · doi:10.7907/q092-p711
Printing Patches for Diseased Hearts
Carmichael, S. W. (2019) · Microscopy Today · doi:10.1017/s1551929519000646
Commentary: If you want blood…
Harvey, D. C., & Kumar, S. R. (2019) · Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2019.10.043
A human iPSC-CM model for type 1 catecholaminergic polymorphic ventricular tachycardia (CPVT1)
Comber, D. A. (2019) · Summit (Simon Fraser University)
Performance of nasal chondrocyte-based engineered tissues in osteoarthritis simulating environments
Rua, L. A. (2019) · edoc (University of Basel) · doi:10.5451/unibas-007189111
Additive Manufacturing for VADs and TAHs - a Review
Puppala, A. K., Sonnati, V., & Gangapuram, S. (2020) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1495/1/012021
Introduction: A Decade Teaching Stem Cell Biology
Rodrigues, G. (2020) · Learning materials in biosciences · doi:10.1007/978-3-030-43939-2_1
Effects of Different Laminins on Human Neural Progenitor Cells Cultured in 3D Electrospun Fibers
Vesterlund, K. (2019) · Lund University Publications Student Papers (Lund University)
Thermographic inspection to provide quality assurance for reinforced 3D printer filaments
Huang, D. Y. M. (2020) · Research Commons (University of Waikato)
Díaz-Marta, A. S. (2020) · Repositorio institucional da Universidade de Santiago de Compostela (University of Santiago de Compostela)
In silico modelling of soft tissue scaffolds
Panidepu, H. (2020) · UC Research Repository (University of Canterbury) · doi:10.26021/10263
Past and Future Prevascularization Strategies with Clinical Relevance: Leading to a Dual Approach
Schneider, K. H., Rohringer, S., Holnthoner, W., Mühleder, S., & Redl, H. R. (2021) · Springer eBooks · doi:10.1007/978-3-319-21056-8_11-1
An In Vitro Comparison Study of Two Cell Therapies for Cardiac Repair
Yee-Goh, A. S. (2020) · Otago University Research Archive (University of Otago)
3D Structures based on carbon materials and conducting polymers for electroresponsive cell cultures
Dominguez‐Alfaro, A. (2021) · Communities in ADDI (Universidad del Pais Vasco)
Metadata
- Authors
- Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T.
- Affiliations
- Tel Aviv University (IL)
- Corresponding author
- Dvir, Tal
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2019-04-15
- Volume
- 6
- Issue
- 11
- Pages
- 1900344-1900344
- ISSN
- 2198-3844 (ISSN-L)
- PMC
- PMC6548966
- OpenAlex
- W2937820813
- Cited by
- 1,042
- References
- 36
- Citations by year
- 2026: 59 · 2025: 106 · 2024: 126 · 2023: 187 · 2022: 157 · 2021: 212 · 2020: 142 · 2019: 51
- FWCI
- 49.47
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Advanced Science (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- European Research Council (637943)
- Israel Science Foundation (700/13)
- Ministry of Science, Technology and Space (3‐12587)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, cardiac tissue engineering, personalized medicine, pluripotent stem cells, cardiomyocytes, endothelial cells, extracellular matrix hydrogel, bioinks, cardiac cell transplantation, drug screening, organ printing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.