3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Open accessThe DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
Generation of thick vascularized tissues that fully match the patient still remains an unmet challenge in cardiac tissue engineering. Here, a simple approach to 3D‐print thick, vascularized, and perfusable cardiac patches that completely match the immunological, cellular, biochemical, and anatomical properties of the patient is reported. To this end, a biopsy of an omental tissue is taken from patients. While the cells are reprogrammed to become pluripotent stem cells, and differentiated to cardiomyocytes and endothelial cells, the extracellular matrix is processed into a personalized hydrogel. Following, the two cell types are separately combined with hydrogels to form bioinks for the parenchymal cardiac tissue and blood vessels. The ability to print functional vascularized patches according to the patient's anatomy is demonstrated. Blood vessel architecture is further improved by mathematical modeling of oxygen transfer. The structure and function of the patches are studied in vitro, and cardiac cell morphology is assessed after transplantation, revealing elongated cardiomyocytes with massive actinin striation. Finally, as a proof of concept, cellularized human hearts with a natural architecture are printed. These results demonstrate the potential of the approach for engineering personalized tissues and organs, or for drug screening in an appropriate anatomical structure and patient‐specific biochemical microenvironment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The fact that macroscale contractile function has not yet been achieved in a 3D printed, perfusable, chambered heart model reflects the challenges associated with handling mature cardiac muscle cells.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Yet, inclusion of contiguous, living muscle to support pump function has not been achieved.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Multiple studies have demonstrated the capacity to print entire heart organ models using biological materials, but the resulting constructs have either lacked cells8, 9 or evidence of electromechanical function18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heart Disease and Stroke Statistics—2017 Update: A Report From the American Heart Association
Benjamin, E. J., Blaha, M. J., Chiuve, S. E., Cushman, M., Das, S. R., Deo, R., de Ferranti, S. D., Floyd, J., Fornage, M., Gillespie, C., et al. (2017) · Circulation · doi:10.1161/cir.0000000000000485 · Cited by 12,591
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Lian, X., Hsiao, C., Wilson, G., Zhu, K., Hazeltine, L. B., Azarin, S. M., Raval, K. K., Zhang, J., Kamp, T. J., & Palecek, S. P. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1200250109 · Cited by 1,717
Scaffolding in tissue engineering: general approaches and tissue-specific considerations
Chan, B. P., & Leong, K. W. (2008) · European Spine Journal · doi:10.1007/s00586-008-0745-3 · Cited by 1,708
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Nanotechnological strategies for engineering complex tissues
Dvir, T., Timko, B. P., Kohane, D. S., & Langer, R. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.246 · Cited by 1,367
Self-citation
Research works printed but not linked: 1
- Members W. G., 2017, Circulation, 135, e146
Cited by
Items 301–400 of 1,000
Ainsworth, M. J., Chirico, N., de Ruijter, M., Hrynevich, A., Dokter, I., Sluijter, J. P. G., Malda, J., van Mil, A., & Castilho, M. D. (2023) · Biofabrication · doi:10.1088/1758-5090/ace07f · Cited by 46
iPSC Bioprinting: Where are We at?
Romanazzo, S., Nemec, S. R., & Roohani, I. (2019) · Materials · doi:10.3390/ma12152453 · Cited by 46
3D bioprinting of stem cell-laden cardiac patch: A promising alternative for myocardial repair
Das, S., Nam, H., & Jang, J. (2021) · APL Bioengineering · doi:10.1063/5.0030353 · Cited by 46
Hydrogels for extrusion-based bioprinting: General considerations
Tejada, G., Passamai, V. E., Katz, S., Castro, G. R., & Álvarez, V. A. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00212 · Cited by 46
Xu, F., Jin, H., Liu, L., Yang, Y., Cen, J., Wu, Y., Chen, S., & Sun, D. (2024) · Microsystems & Nanoengineering · doi:10.1038/s41378-024-00692-7 · Cited by 45
Sousa, A. C., Alvites, R., Lopes, B., Sousa, P., Moreira, A. D. S., Coelho, A. F., Santos, J. D., Atayde, L. M., Alves, N. M., & Maurício, A. C. (2025) · Journal of Functional Biomaterials · doi:10.3390/jfb16010028 · Cited by 45
Alcala‐Orozco, C. R., Cui, X., Hooper, G. J., Lim, K. S., & Woodfield, T. B. F. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.03.008 · Cited by 46
Regenerating dynamic organs using biomimetic patches
Chansoria, P., Etter, E. L., & Nguyen, J. (2021) · Trends in biotechnology · doi:10.1016/j.tibtech.2021.07.001 · Cited by 45
Patient-Specific 3D Printed Soft Models for Liver Surgical Planning and Hands-On Training
Valls-Esteve, A., Tejo‐Otero, A., Lustig-Gainza, P., Buj-Corral, I., Fenollosa-Artés, F., Rubio-Palau, J., Barber, I., Munuera, J., Fondevila, C., & Krauel, L. (2023) · Gels · doi:10.3390/gels9040339 · Cited by 45
Cardiomyogenesis Modeling Using Pluripotent Stem Cells: The Role of Microenvironmental Signaling
Leitolis, A., Robert, A. W., Pereira, I. T., Correa, A., & Stimamiglio, M. A. (2019) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2019.00164 · Cited by 45
Human iPSCs and Genome Editing Technologies for Precision Cardiovascular Tissue Engineering
Gähwiler, E. K. N., Motta, S. E., Martin, M., Nugraha, B., Hoerstrup, S. P., & Emmert, M. Y. (2021) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2021.639699 · Cited by 44
Chansoria, P., Asif, S., Gupta, N. K., Piedrahita, J. A., & Shirwaiker, R. A. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202102351 · Cited by 44
Considerations for the Bioengineering of Advanced Cardiac In Vitro Models of Myocardial Infarction
Sharma, P., Wang, X., Ming, C. L. C., Vettori, L., Figtree, G. A., Boyle, A., & Gentile, C. (2021) · Small · doi:10.1002/smll.202003765 · Cited by 43
Advances in 3D Bioprinted Cardiac Tissue Using Stem Cell-Derived Cardiomyocytes
Bliley, J. M., Stang, M. A., Behre, A., & Feinberg, A. W. (2024) · Stem Cells Translational Medicine · doi:10.1093/stcltm/szae014 · Cited by 44
Advances and challenges of the cell-based therapies among diabetic patients
Raoufinia, R., Rahimi, H. R., Saburi, E., & Moghbeli, M. (2024) · Journal of Translational Medicine · doi:10.1186/s12967-024-05226-3 · Cited by 43
Advanced bioprinting strategies for fabrication of biomimetic tissues and organs
Ng, W. L., Vyas, C., Huang, B., Yeong, W. Y., & Bártolo, P. (2025) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/adeee0 · Cited by 43
Novel bioinks from UV-responsive norbornene-functionalized carboxymethyl cellulose macromers
Ji, S., Abaci, A., Morrison, T. X., Gramlich, W. M., & Güvendiren, M. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00083 · Cited by 43
Adhesive Tissue Engineered Scaffolds: Mechanisms and Applications
Chen, S., Gil, C. J., Ning, L., Jin, L., Perez, L., Kabboul, G., Tomov, M. L., & Serpooshan, V. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.683079 · Cited by 43
Mao, M., Qu, X., Zhang, Y., Gu, B., Li, C., Liu, R., Li, X., Zhu, H., He, J., & Li, D. (2023) · Nature Communications · doi:10.1038/s41467-023-37716-1 · Cited by 42
“Recent advances in the bioprinting of cell/hydrogel bioinks have provided opportunities to fabricate cellular constructs with CMs and embedded vascular structures as predesigned architectures 24 – 26 .”
Functional microvascularization of human myocardium in vitro
King, O., Cruz-Moreira, D., Sayed, A., Kermani, F., Kit-Anan, W., Sunyovszki, I., Wang, B. X., Downing, B., Fourre, J., Hachim, D., et al. (2022) · Cell Reports Methods · doi:10.1016/j.crmeth.2022.100280 · Cited by 42
Wan, H., Xiang, J., Mao, G., Pan, S., Li, B., & Lü, Y. (2024) · ACS Omega · doi:10.1021/acsomega.4c02847 · Cited by 42
Hydrogel-based cardiac patches for myocardial infarction therapy: Recent advances and challenges
Liu, Z., Zheng, Z., Xie, J., Wei, H., & Yu, C. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.101331 · Cited by 42
Applications of 3D Bioprinted-Induced Pluripotent Stem Cells in Healthcare
Soman, S. S., & Vijayavenkataraman, S. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v6i4.280 · Cited by 42
Mbundi, L., González‐Pérez, M., González‐Pérez, F., Juanes‐Gusano, D., & Rodríguez‐Cabello, J. C. (2021) · Frontiers in Materials · doi:10.3389/fmats.2020.601795 · Cited by 42
3D bioprinting: novel approaches for engineering complex human tissue equivalents and drug testing
Hagenbuchner, J., Nothdurfter, D., & Ausserlechner, M. J. (2021) · Essays in Biochemistry · doi:10.1042/ebc20200153 · Cited by 42
Biomaterials-based Approaches for Cardiac Regeneration
Vasu, S., Zhou, J., Chen, J., Johnston, P. V., & Kim, D. (2021) · Korean Circulation Journal · doi:10.4070/kcj.2021.0291 · Cited by 42
Proliferation and Maturation: Janus and the Art of Cardiac Tissue Engineering
Singh, B. N., Yücel, D., Garay, B. I., Tolkacheva, E. G., Kyba, M., Perlingeiro, R. C. R., van Berlo, J. H., & Ogle, B. M. (2023) · Circulation Research · doi:10.1161/circresaha.122.321770 · Cited by 42
Post‐Maturation Reinforcement of 3D‐Printed Vascularized Cardiac Tissues
Silberman, E., Oved, H., Namestnikov, M., Shapira, A., & Dvir, T. (2023) · Advanced Materials · doi:10.1002/adma.202302229 · Cited by 43
Self-citationEvolution of bioprinting and current applications
Mendoza-Cerezo, L., Rodríguez-Rego, J. M., Macías-García, A., Marcos-Romero, A. C., & Díaz-Parralejo, A. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.742 · Cited by 41
Lv, Q., Zhou, D., He, Y., Xu, T., Qiu, X., & Zeng, J. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.01.013 · Cited by 41
Son, J., Li, S., & Jeong, W. (2025) · Gels · doi:10.3390/gels11080636 · Cited by 41
He, H., Li, D., Lin, Z., Peng, L., Yang, J., Wu, M., Cheng, D., Pan, H., & Ruan, C. (2020) · Biofabrication · doi:10.1088/1758-5090/ab9906 · Cited by 41
Hierarchical porous silk fibroin/poly(L-lactic acid) fibrous membranes towards vascular scaffolds
Song, J., Chen, Z., Murillo, L. L., Tang, D., Chen, M., Zhong, X., Wang, T., & Li, J. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.10.266 · Cited by 41
Multimaterial bioprinting approaches and their implementations for vascular and vascularized tissues
Dikyol, C., Altunbek, M., Bártolo, P., & Koç, B. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00159 · Cited by 41
Resolution of 3D bioprinting inside bulk gel and granular gel baths
Xie, Z., Kang, D., & Matsusaki, M. (2021) · Soft Matter · doi:10.1039/d1sm00926e · Cited by 41
Khanna, A., Ayan, B., Undieh, A. A., Yang, Y., & Huang, N. F. (2022) · Journal of Molecular and Cellular Cardiology · doi:10.1016/j.yjmcc.2022.04.017 · Cited by 41
Correia, C. D., Ferreira, A., Fernandes, M. T., Silva, B. M., Esteves, F., Leitão, H. S., Bragança, J., & Calado, S. M. (2023) · Cells · doi:10.3390/cells12131727 · Cited by 42
Fang, Y., Sun, W., Zhang, T., & Xiong, Z. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2021.121298 · Cited by 40
CHIR99021 Promotes hiPSC‐Derived Cardiomyocyte Proliferation in Engineered 3D Microtissues
Hesselbarth, R., Esser, T. U., Roshanbinfar, K., Schrüfer, S., Schubert, D. W., & Engel, F. B. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100926 · Cited by 40
Zhao, F., Cheng, J., Sun, M., Yu, H., Wu, N., Li, Z., Zhang, J., Li, Q., Yang, P., Liu, Q., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/aba411 · Cited by 40
A Review on Recent Trends and Applications of IoT in Additive Manufacturing
Chigilipalli, B. K., Karri, T., Chetti, S. N., Bhiogade, G., Kottala, R. K., & Cheepu, M. (2023) · Applied System Innovation · doi:10.3390/asi6020050 · Cited by 40
Additive manufacturing of bio-based hydrogel composites: recent advances
Siwal, S. S., Mishra, K., Saini, A. K., Alsanie, W. F., Kovalcik, A., & Thakur, V. K. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-022-02516-z · Cited by 39
Kim, M. S., Choi, Y., & Lee, K. Y. (2025) · Polymers · doi:10.3390/polym17172337 · Cited by 39
Recombinant spider silk protein eADF4(C16)-RGD coatings are suitable for cardiac tissue engineering
Kramer, J. P. M., Aigner, T. B., Petzold, J., Roshanbinfar, K., Scheibel, T., & Engel, F. B. (2020) · Scientific Reports · doi:10.1038/s41598-020-65786-4 · Cited by 39
3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization
Kam, D., Braner, A., Abouzglo, A., Larush, L., Chiappone, A., Shoseyov, O., & Magdassi, S. (2021) · Langmuir · doi:10.1021/acs.langmuir.1c00553 · Cited by 39
Kang, B., Park, Y., Hwang, D. G., Kim, D., Yong, U., Lim, K. S., & Jang, J. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100947 · Cited by 39
Global hotspots and emerging trends in 3D bioprinting research
Ding, Z., Tang, N., Huang, J., Cao, X., & Wu, S. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1169893 · Cited by 39
Wu, Y. B., Yang, X., Gupta, D., Alioglu, M. A., Qin, M., Özbolat, V., Li, Y., & Ozbolat, I. T. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202313088 · Cited by 38
Broadwin, M., Imarhia, F., Oh, A., Stone, C. R., Sellke, F. W., Bhowmick, S., & Abid, M. R. (2024) · Bioengineering · doi:10.3390/bioengineering11030218 · Cited by 38
Jiang, Z., Jin, B., Liang, Z., Wang, Y., Ren, S., Huang, Y., Li, C., Sun, H., Li, Y., Liu, L., et al. (2024) · Biomaterials · doi:10.1016/j.biomaterials.2024.122681 · Cited by 38
Advances in 3D Bioprinting and Microfluidics for Organ-on-a-Chip Platforms
de Barros, N. R., Harb, S. V., Horinouchi, C. D. D. S., Tofani, L. B., Santos, D., Elias, G. B., Velho, J. C. M., de Aguiar, A. C., Sant’Ana, M., & Figueira, A. C. M. (2025) · Polymers · doi:10.3390/polym17223078 · Cited by 38
Enhancing myocardial repair with CardioClusters
Monsanto, M. M., Wang, B. J., Ehrenberg, Z. R., Echeagaray, O., White, K. S., Alvarez, R., Fisher, K., Sengphanith, S., Muliono, A., Gude, N. A., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17742-z · Cited by 38
Engineering Three-Dimensional Vascularized Cardiac Tissues
Williams, M. A. C., Mair, D. B., Lee, W., Lee, E., & Kim, D. (2021) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2020.0343 · Cited by 39
Phonon imaging in 3D with a fibre probe
Cavera, S. L., Pérez-Cota, F., Smith, R. J., & Clark, M. (2021) · Light Science & Applications · doi:10.1038/s41377-021-00532-7 · Cited by 38
Guan, G., Huo, D., Li, Y., Zhao, X., Li, Y., Qin, Z., Sun, D., Yang, G., Yang, M., Tan, J., et al. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.04.010 · Cited by 38
Vascularization in Bioartificial Parenchymal Tissue: Bioink and Bioprinting Strategies
Salg, G. A., Blaeser, A., Gerhardus, J. S., Hackert, T., & Kenngott, H. G. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23158589 · Cited by 38
Maturing differentiated human pluripotent stem cells in vitro: methods and challenges
Ottaviani, D., ter Huurne, M., Elliott, D. A., Bellin, M., & Mummery, C. L. (2023) · Development · doi:10.1242/dev.201103 · Cited by 38
Sacrificial biomaterials in 3D fabrication of scaffolds for tissue engineering applications
Wang, C., & Zhou, Y. (2023) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35312 · Cited by 38
Vernon, M. J., Mela, P., Dilley, R. J., Jansen, S. J., Doyle, B. J., Ihdayhid, A. R., & De‐Juan‐Pardo, E. M. (2024) · Trends in biotechnology · doi:10.1016/j.tibtech.2023.11.001 · Cited by 38
Turning regenerative technologies into treatment to repair myocardial injuries
Carotenuto, F., Teodori, L., Maccari, A. M., Delbono, L., Orlando, G., & Nardo, P. D. (2019) · Journal of Cellular and Molecular Medicine · doi:10.1111/jcmm.14630 · Cited by 37
Current options in the life cycle assessment of additive manufacturing products
Výtisk, J., Kočí, V., Honus, S., & Vrtek, M. (2019) · Open Engineering · doi:10.1515/eng-2019-0073 · Cited by 37
Heterotypic tumor models through freeform printing into photostabilized granular microgels
Molley, T. G., Jalandhra, G. K., Nemec, S. R., Tiffany, A. S., Patkunarajah, A., Poole, K., Harley, B. A. C., Hung, T., & Kilian, K. A. (2021) · Biomaterials Science · doi:10.1039/d1bm00574j · Cited by 37
Cardiovascular 3D bioprinting: A review on cardiac tissue development
Kalhori, D., Zakeri, N., Zafar-Jafarzadeh, M., Moroni, L., & Solati‐Hashjin, M. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00221 · Cited by 37
Three-Dimensional Bioprinting in Cardiovascular Disease: Current Status and Future Directions
Sun, Z., Zhao, J., Leung, E. W., Flandes‐Iparraguirre, M., Vernon, M. J., Silberstein, J., De‐Juan‐Pardo, E. M., & Jansen, S. J. (2023) · Biomolecules · doi:10.3390/biom13081180 · Cited by 37
Injectable Hydrogels in Cardiovascular Tissue Engineering
Patel, R., & Patel, D. D. (2024) · Polymers · doi:10.3390/polym16131878 · Cited by 36
Recent advances in 3D bioprinting of tissues and organs for transplantation and drug screening
Sun, X., Ren, W., Xie, L., Ren, Q., Zhu, Z., Jia, Q., Jiang, W., Jin, Z., & Yu, Y. (2024) · Virtual and Physical Prototyping · doi:10.1080/17452759.2024.2384662 · Cited by 36
From biomimicry to bioelectronics: Smart materials for cardiac tissue engineering
Bolonduro, O. A., Duffy, B. M., Rao, A. A., Black, L. D., & Timko, B. P. (2020) · Nano Research · doi:10.1007/s12274-020-2682-3 · Cited by 36
Novel Strategies in Artificial Organ Development: What Is the Future of Medicine?
Klak, M., Bryniarski, T., Kowalska, P. D., Gomółka, M., Tymicki, G., Kosowska, K., Cywoniuk, P., Dobrzański, T., Turowski, P., & Wszola, M. (2020) · Micromachines · doi:10.3390/mi11070646 · Cited by 36
Engineering and Assessing Cardiac Tissue Complexity
Tadevosyan, K., Iglesias‐García, O., Mazo, M. M., Prósper, F., & Raya, Á. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22031479 · Cited by 36
Serna, J. A., Rueda-Gensini, L., Céspedes-Valenzuela, D. N., Cifuentes, J., Cruz, J. C., & Muñoz-Camargo, C. (2021) · Polymers · doi:10.3390/polym13193263 · Cited by 36
Sjöholm, E., Mathiyalagan, R., Lindfors, L., Wang, X., Ojala, S., & Sandler, N. (2022) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2022.106190 · Cited by 36
Lazarus, E., Meyer, A. S., Ikuma, K., & Rivero, I. V. (2023) · Microbial Biotechnology · doi:10.1111/1751-7915.14360 · Cited by 35
Yuan, Z., Li, Y., Sun, M., Yuan, M., Han, Z., Li, X., Liu, S., Sun, Y., Cao, J., & Fan, L. (2025) · Theranostics · doi:10.7150/thno.106991 · Cited by 35
Budharaju, H., Singh, R. K., & Kim, H. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.07.006 · Cited by 35
Bioprinting stem cells: building physiological tissues one cell at a time
Scognamiglio, C., Soloperto, A., Ruocco, G., & Cidonio, G. (2020) · American Journal of Physiology-Cell Physiology · doi:10.1152/ajpcell.00124.2020 · Cited by 35
Jensen, J. H., Cakal, S. D., Li, J., Pless, C. J., Radeke, C., Jepsen, M. L., Jensen, T. E., Dufva, M., & Lind, J. U. (2020) · Scientific Reports · doi:10.1038/s41598-020-69936-6 · Cited by 35
Building an Artificial Cardiac Microenvironment: A Focus on the Extracellular Matrix
Pagliarosi, O., Picchio, V., Chimenti, I., Messina, E., & Gaetani, R. (2020) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2020.559032 · Cited by 36
Wang, H., Guo, K., Zhang, L., Zhu, H., Li, S., Li, S., Gao, F., Liu, X., Gu, Q., Liu, L., et al. (2021) · Biofabrication · doi:10.1088/1758-5090/abdb86 · Cited by 35
Real-time imaging and analysis of cell-hydrogel interplay within an extrusion-bioprinting capillary
Poologasundarampillai, G., Haweet, A., Jayash, S. N., Morgan, G., Moore, J. E., & Candeo, A. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00144 · Cited by 35
Kahn-Krell, A. M., Pretorius, D., Ou, J., Fast, V. G., Litovsky, S. H., Berry, J. L., Liu, X., & Zhang, J. J. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.674260 · Cited by 35
Advances of 3D Printing in Vascularized Organ Construction
Li, S., Liu, S., & Wang, X. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i3.588 · Cited by 35
3D Bioprinting Technology and Hydrogels Used in the Process
Lima, T. D. P. D. L., Canelas, C. A. D. A., Concha, V. O. C., da Costa, F. A. M., & Passos, M. F. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13040214 · Cited by 35
Whole-Heart Tissue Engineering and Cardiac Patches: Challenges and Promises
Akbarzadeh, A., Sobhani, S., Khaboushan, A. S., & Kajbafzadeh, A. M. (2023) · Bioengineering · doi:10.3390/bioengineering10010106 · Cited by 35
A dive into the bath: embedded 3D bioprinting of freeform in vitro models
Öztürk-Öncel, M. Ö., Leal-Martínez, B. H., Monteiro, R. F., Gomes, M. E., & Domingues, R. M. A. (2023) · Biomaterials Science · doi:10.1039/d3bm00626c · Cited by 35
Drug delivery and testing via 3D printing
Kumar, V., Kaur, H., Kumari, A., Hooda, G., Garg, V., & Dureja, H. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00298 · Cited by 35
Multi-material Direct Ink Writing 3D Food Printing using Multi-channel Nozzle
Lee, C. P., Ng, M. J. Y., Chian, N., & Hashimoto, M. (2024) · Future Foods · doi:10.1016/j.fufo.2024.100376 · Cited by 36
Hybrid 3D Bioprinting of Sustainable Biomaterials for Advanced Multiscale Tissue Engineering
Ma, X., Xu, M., Cui, X., Yin, J., & Wu, Q. (2025) · Small · doi:10.1002/smll.202408947 · Cited by 35
Expansion Culture of Human Pluripotent Stem Cells and Production of Cardiomyocytes
Le, M. N. T., & Hasegawa, K. (2019) · Bioengineering · doi:10.3390/bioengineering6020048 · Cited by 34
de Almeida, H. V., Tenreiro, M. F., Louro, A. F., Abecasis, B., Santinha, D. R., Calmeiro, T., Fortunato, E. M. C., Ferreira, L., Alves, P. M., & Serra, M. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c01490 · Cited by 35
Stem cell-based vascularization of microphysiological systems
Browne, S., Gill, E., Schultheiss, P. J., Goswami, I., & Healy, K. E. (2021) · Stem Cell Reports · doi:10.1016/j.stemcr.2021.03.015 · Cited by 34
Recent advances in 3D printing hydrogel for topical drug delivery
Zhang, Y., & Wang, C. (2022) · MedComm – Biomaterials and Applications · doi:10.1002/mba2.11 · Cited by 34
Hermans, F., Hasevoets, S., Vankelecom, H. E. J., Bronckaers, A., & Lambrichts, I. (2024) · Stem Cell Reviews and Reports · doi:10.1007/s12015-024-10702-w · Cited by 34
Recent Advancements of Bioinks for 3D Bioprinting of Human Tissues and Organs
He, W., Deng, J., Ma, B., Tao, K., Zhang, Z., Ramakrishna, S., Yuan, W., & Ye, T. (2023) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c00806 · Cited by 33
Engineering Smart Hybrid Tissues with Built-In Electronics
Feiner, R., & Dvir, T. (2020) · iScience · doi:10.1016/j.isci.2020.100833 · Cited by 33
Self-citation3-Dimensional Bioprinting of Cardiovascular Tissues
Sung, K., Patel, N. R., Ashammakhi, N. A., & Nguyen, K. (2021) · JACC Basic to Translational Science · doi:10.1016/j.jacbts.2020.12.006 · Cited by 33
Capillary-like Formations of Endothelial Cells in Defined Patterns Generated by Laser Bioprinting
Koch, L., Deiwick, A., & Chichkov, B. N. (2021) · Micromachines · doi:10.3390/mi12121538 · Cited by 33
Advances in 3D culture systems for therapeutic discovery and development in brain cancer
Wanigasekara, J., Cullen, P. J., Bourke, P., Tiwari, B. K., & Curtin, J. F. (2022) · Drug Discovery Today · doi:10.1016/j.drudis.2022.103426 · Cited by 33
Gu, B., Han, K., Cao, H., Huang, X., Li, X., Mao, M., Zhu, H., Cai, H., Li, D., & He, J. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100914 · Cited by 33
Mousavi, A., Hedayatnia, A., Vliet, P. P. V., Dartora, D. R., Wong, N., Rafatian, N., Nuyt, A. M., Moraes, C., Ajji, A., Andelfinger, G., et al. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.102035 · Cited by 34
Salih, T., Caputo, M., & Ghorbel, M. T. (2024) · Biomolecules · doi:10.3390/biom14070861 · Cited by 32
Metadata
- Authors
- Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T.
- Affiliations
- Tel Aviv University (IL)
- Corresponding author
- Dvir, Tal
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2019-04-15
- Volume
- 6
- Issue
- 11
- Pages
- 1900344-1900344
- ISSN
- 2198-3844 (ISSN-L)
- PMC
- PMC6548966
- OpenAlex
- W2937820813
- Cited by
- 1,042
- References
- 36
- Citations by year
- 2026: 59 · 2025: 106 · 2024: 126 · 2023: 187 · 2022: 157 · 2021: 212 · 2020: 142 · 2019: 51
- FWCI
- 49.47
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Advanced Science (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- European Research Council (637943)
- Israel Science Foundation (700/13)
- Ministry of Science, Technology and Space (3‐12587)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, cardiac tissue engineering, personalized medicine, pluripotent stem cells, cardiomyocytes, endothelial cells, extracellular matrix hydrogel, bioinks, cardiac cell transplantation, drug screening, organ printing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.