3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Open accessThe DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
Generation of thick vascularized tissues that fully match the patient still remains an unmet challenge in cardiac tissue engineering. Here, a simple approach to 3D‐print thick, vascularized, and perfusable cardiac patches that completely match the immunological, cellular, biochemical, and anatomical properties of the patient is reported. To this end, a biopsy of an omental tissue is taken from patients. While the cells are reprogrammed to become pluripotent stem cells, and differentiated to cardiomyocytes and endothelial cells, the extracellular matrix is processed into a personalized hydrogel. Following, the two cell types are separately combined with hydrogels to form bioinks for the parenchymal cardiac tissue and blood vessels. The ability to print functional vascularized patches according to the patient's anatomy is demonstrated. Blood vessel architecture is further improved by mathematical modeling of oxygen transfer. The structure and function of the patches are studied in vitro, and cardiac cell morphology is assessed after transplantation, revealing elongated cardiomyocytes with massive actinin striation. Finally, as a proof of concept, cellularized human hearts with a natural architecture are printed. These results demonstrate the potential of the approach for engineering personalized tissues and organs, or for drug screening in an appropriate anatomical structure and patient‐specific biochemical microenvironment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The fact that macroscale contractile function has not yet been achieved in a 3D printed, perfusable, chambered heart model reflects the challenges associated with handling mature cardiac muscle cells.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Yet, inclusion of contiguous, living muscle to support pump function has not been achieved.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Multiple studies have demonstrated the capacity to print entire heart organ models using biological materials, but the resulting constructs have either lacked cells8, 9 or evidence of electromechanical function18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heart Disease and Stroke Statistics—2017 Update: A Report From the American Heart Association
Benjamin, E. J., Blaha, M. J., Chiuve, S. E., Cushman, M., Das, S. R., Deo, R., de Ferranti, S. D., Floyd, J., Fornage, M., Gillespie, C., et al. (2017) · Circulation · doi:10.1161/cir.0000000000000485 · Cited by 12,591
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Lian, X., Hsiao, C., Wilson, G., Zhu, K., Hazeltine, L. B., Azarin, S. M., Raval, K. K., Zhang, J., Kamp, T. J., & Palecek, S. P. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1200250109 · Cited by 1,717
Scaffolding in tissue engineering: general approaches and tissue-specific considerations
Chan, B. P., & Leong, K. W. (2008) · European Spine Journal · doi:10.1007/s00586-008-0745-3 · Cited by 1,708
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Nanotechnological strategies for engineering complex tissues
Dvir, T., Timko, B. P., Kohane, D. S., & Langer, R. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.246 · Cited by 1,367
Self-citation
Research works printed but not linked: 1
- Members W. G., 2017, Circulation, 135, e146
Cited by
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels
Skylar-Scott, M. A., Uzel, S. G. M., Nam, L. L., Ahrens, J. H., Truby, R. L., Damaraju, S., & Lewis, J. A. (2019) · Science Advances · doi:10.1126/sciadv.aaw2459 · Cited by 943
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Development of 3D bioprinting: From printing methods to biomedical applications
Gu, Z., Fu, J., Lin, H., & He, Y. (2020) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2019.11.003 · Cited by 511
From Shape to Function: The Next Step in Bioprinting
Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 476
High-resolution tomographic volumetric additive manufacturing
Loterie, D., Delrot, P., & Moser, C. (2020) · Nature Communications · doi:10.1038/s41467-020-14630-4 · Cited by 461
Direct cell reprogramming: approaches, mechanisms and progress
Wang, H., Yang, Y., Liu, J., & Qian, L. (2021) · Nature Reviews Molecular Cell Biology · doi:10.1038/s41580-021-00335-z · Cited by 444
Askari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
Seoane-Viaño, I., Januskaite, P., Alvarez-Lorenzo, C., Basit, A. W., & Goyanes, A. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.02.027 · Cited by 357
3D Printing Materials for Soft Robotics
Sachyani Keneth, E., Kamyshny, A., Totaro, M., Beccai, L., & Magdassi, S. (2021) · Advanced Materials · doi:10.1002/adma.202003387 · Cited by 356
Scaffolding Biomaterials for 3D Cultivated Meat: Prospects and Challenges
Bomkamp, C., Skaalure, S. C., Fernando, G. F., Ben‐Arye, T., Swartz, E. W., & Specht, E. A. (2022) · Advanced Science · doi:10.1002/advs.202102908 · Cited by 349
Bioprinting: From Tissue and Organ Development to in Vitro Models
Mota, C., Camarero-Espinosa, S., Baker, M. B., Wieringa, P., & Moroni, L. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00789 · Cited by 345
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Kupfer, M. E., Lin, W.-H., Ravikumar, V., Qiu, K., Wang, L., Gao, L., Bhuiyan, D. B., Lenz, M., Ai, J., Mahutga, R. R., et al. (2020) · Circulation Research · doi:10.1161/circresaha.119.316155 · Cited by 329
Rethinking organoid technology through bioengineering
Garreta, E., Kamm, R. D., Chuva de Sousa Lopes, S. M., Lancaster, M. A., Weiss, R., Trepat, X., Hyun, I., & Montserrat, N. (2021) · Nature Materials · doi:10.1038/s41563-020-00804-4 · Cited by 324
Kang, D.-H., Louis, F., Liu, H., Shimoda, H., Nishiyama, Y., Nozawa, H., Kakitani, M., Takagi, D., Kasa, D., Nagamori, E., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-25236-9 · Cited by 307
Print Me An Organ! Why We Are Not There Yet
Ng, W. L., Chua, C. K., & Shen, Y.-F. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101145 · Cited by 287
3D Printing in Suspension Baths: Keeping the Promises of Bioprinting Afloat
McCormack, A., Highley, C. B., Leslie, N. R., & Melchels, F. P. W. (2020) · Trends in Biotechnology · doi:10.1016/j.tibtech.2019.12.020 · Cited by 284
The rheology of direct and suspended extrusion bioprinting
Cooke, M. E., & Rosenzweig, D. H. (2021) · APL Bioengineering · doi:10.1063/5.0031475 · Cited by 284
Alginate: Enhancement Strategies for Advanced Applications
Hurtado, A., Aljabali, A. A. A., Mishra, V., Tambuwala, M. M., & Serrano-Aroca, Á. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23094486 · Cited by 275
Emerging Technologies in Multi‐Material Bioprinting
Ravanbakhsh, H., Karamzadeh, V., Bao, G., Mongeau, L., Juncker, D., & Zhang, Y. S. (2021) · Advanced Materials · doi:10.1002/adma.202104730 · Cited by 266
High cell density and high-resolution 3D bioprinting for fabricating vascularized tissues
You, S., Xiang, Y., Hwang, H. H., Berry, D. B., Kiratitanaporn, W., Guan, J., Yao, E., Tang, M., Zhong, Z., Ma, X., et al. (2023) · Science Advances · doi:10.1126/sciadv.ade7923 · Cited by 246
Natural-Based Hydrogels for Tissue Engineering Applications
Gomez-Florit, M., Pardo, A., Domingues, R. M. A., Graça, A. L., Babo, P. S., Reis, R. L., & Gomes, M. E. (2020) · Molecules · doi:10.3390/molecules25245858 · Cited by 246
3D Bioprinting of Cell‐Laden Hydrogels for Improved Biological Functionality
Hull, S. M., Brunel, L. G., & Heilshorn, S. C. (2022) · Advanced Materials · doi:10.1002/adma.202103691 · Cited by 240
Extracellular‐Matrix‐Reinforced Bioinks for 3D Bioprinting Human Tissue
De Santis, M. M., Alsafadi, H. N., Tas, S., Bölükbas, D. A., Prithiviraj, S., Da Silva, I. A. N., Mittendorfer, M., Ota, C., Stegmayr, J., Daoud, F., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005476 · Cited by 233
Chemical insights into bioinks for 3D printing
Valot, L., Martinez, J., Mehdi, A., & Subra, G. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00718c · Cited by 218
Emergence of FRESH 3D printing as a platform for advanced tissue biofabrication
Shiwarski, D. J., Hudson, A. R., Tashman, J. W., & Feinberg, A. W. (2021) · APL Bioengineering · doi:10.1063/5.0032777 · Cited by 216
Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles
Choi, S., Lee, K. Y., Kim, S. L., MacQueen, L. A., Chang, H., Zimmerman, J. F., Jin, Q., Peters, M. M., Ardoña, H. A. M., Liu, X., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01611-3 · Cited by 212
Strategies to use fibrinogen as bioink for 3D bioprinting fibrin-based soft and hard tissues
de Melo, B. A. G., Jodat, Y. A., Cruz, E. M., Benincasa, J. C., Shin, S. R., & Porcionatto, M. A. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.09.024 · Cited by 212
Hydrogels for Tissue Engineering: Addressing Key Design Needs Toward Clinical Translation
Xu, F., Dawson, C., Lamb, M., Mueller, E., Stefanek, E., Akbari, M., & Hoare, T. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.849831 · Cited by 209
Budharaju, H., Sundaramurthi, D., & Sethuraman, S. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.10.012 · Cited by 200
Fang, W., Yang, M., Wang, L., Li, W., Liu, M., Jin, Y., Wang, Y., Yang, R., Wang, Y., Zhang, K., et al. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.759 · Cited by 199
Advanced Cardiac Patches for the Treatment of Myocardial Infarction
Liu, T., Hao, Y., Zhang, Z., Zhou, H., Peng, S., Zhang, D., Li, K., Chen, Y., & Chen, M. (2024) · Circulation · doi:10.1161/circulationaha.123.067097 · Cited by 196
From Arteries to Capillaries: Approaches to Engineering Human Vasculature
Fleischer, S., Tavakol, D. N., & Vunjak‐Novakovic, G. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910811 · Cited by 195
Ha, Y., Ma, X., Li, S., Li, T., Li, Z., Qian, Y., Shafiq, M., Wang, J., Zhou, X., & He, C. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202200011 · Cited by 191
Industry 4.0 and Digitalisation in Healthcare
Popov, V. V., Kudryavtseva, E. V., Katiyar, N. K., Shishkin, A., Stepanov, S. I., & Goel, S. (2022) · Materials · doi:10.3390/ma15062140 · Cited by 186
Biofabrication methods for reconstructing extracellular matrix mimetics
Aazmi, A., Zhang, D., Mazzaglia, C., Yu, M., Wang, Z., Yang, H., Huang, Y. Y. S., & Ma, L. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.08.018 · Cited by 186
Efficient myotube formation in 3D bioprinted tissue construct by biochemical and topographical cues
Kim, W., Lee, H., Lee, J., Atala, A., Yoo, J. J., Lee, S. J., & Kim, G. H. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119632 · Cited by 185
3D bioprinting in cardiac tissue engineering
Wang, Z., Wang, L., Li, T., Liu, S., Guo, B., Huang, W., & Wu, Y. (2021) · Theranostics · doi:10.7150/thno.61621 · Cited by 185
Liu, Y., Peng, L., Li, L., Huang, C., Shi, K., Meng, X., Wang, P., Wu, M., Li, L., Cao, H., et al. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.121216 · Cited by 185
3D Printing in Medicine for Preoperative Surgical Planning: A Review
Tejo-Otero, A., Buj-Corral, I., & Fenollosa-Artés, F. (2020) · Annals of Biomedical Engineering · doi:10.1007/s10439-019-02411-0 · Cited by 181
Economidou, S. N., Uddin, M. J., Marques, M. J. M., Douroumis, D., Sow, W. T., Li, H., Reid, A., Windmill, J. F. C., & Podoleanu, A. G. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101815 · Cited by 180
3D Printing of Physical Organ Models: Recent Developments and Challenges
Jin, Z., Li, Y., Yu, K., Liu, L., Fu, J., Yao, X., Zhang, A., & He, Y. (2021) · Advanced Science · doi:10.1002/advs.202101394 · Cited by 180
Szklanny, A. A., Machour, M., Redenski, I., Chochola, V., Goldfracht, I., Kaplan, B., Epshtein, M., Simaan Yameen, H., Merdler, U., Feinberg, A., et al. (2021) · Advanced Materials · doi:10.1002/adma.202102661 · Cited by 178
Advances in 3D bioprinting technology for cardiac tissue engineering and regeneration
Liu, N., Ye, X., Yao, B., Zhao, M., Wu, P., Liu, G., Zhuang, D., Jiang, H., Chen, X., He, Y., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.10.021 · Cited by 177
Review on the Vascularization of Organoids and Organoids-on-a-Chip
Zhao, X., Xu, Z., Xiao, L., Shi, T., Xiao, H., Wang, Y., Li, Y., Xue, F., & Zeng, W. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.637048 · Cited by 177
Light-based vat-polymerization bioprinting
Levato, R., Dudaryeva, O., Garciamendez-Mijares, C. E., Kirkpatrick, B. E., Rizzo, R., Schimelman, J., Anseth, K. S., Chen, S., Zenobi-Wong, M., & Zhang, Y. S. (2023) · Nature Reviews Methods Primers · doi:10.1038/s43586-023-00231-0 · Cited by 176
Void‐Free 3D Bioprinting for In Situ Endothelialization and Microfluidic Perfusion
Ouyang, L., Armstrong, J. P. K., Chen, Q., Lin, Y., & Stevens, M. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201908349 · Cited by 175
An Overview of Additive Manufacturing of Polymers and Associated Composites
Nath, S. D., & Nilufar, S. (2020) · Polymers · doi:10.3390/polym12112719 · Cited by 174
Development of Innovative Biomaterials and Devices for the Treatment of Cardiovascular Diseases
Wang, Y., Li, G., Yang, L., Luo, R., & Guo, G. (2022) · Advanced Materials · doi:10.1002/adma.202201971 · Cited by 174
MXene-Based Elastomer Mimetic Stretchable Sensors: Design, Properties, and Applications
Das, P., Marvi, P. K., Ganguly, S., Tang, X. S., Wang, B., Srinivasan, S., Rajabzadeh, A. R., & Rosenkranz, A. (2024) · Nano-Micro Letters · doi:10.1007/s40820-024-01349-w · Cited by 173
Recent advances in defined hydrogels in organoid research
Gan, Z., Qin, X., Liu, H., Liu, J., & Qin, J. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.004 · Cited by 172
Next generation of heart regenerative therapies: progress and promise of cardiac tissue engineering
Tenreiro, M. F., Louro, A. F., Alves, P. M., & Serra, M. (2021) · npj Regenerative Medicine · doi:10.1038/s41536-021-00140-4 · Cited by 170
Human‐Recombinant‐Elastin‐Based Bioinks for 3D Bioprinting of Vascularized Soft Tissues
Lee, S., Sani, E. S., Spencer, A. R., Guan, Y., Weiss, A. S., & Annabi, N. (2020) · Advanced Materials · doi:10.1002/adma.202003915 · Cited by 169
4D bioprinting of programmed dynamic tissues
Lai, J., Liu, Y., Lü, G., Yung, P. S., Wang, X., Tuan, R. S., & Li, Z. A. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.03.033 · Cited by 169
Bioinspired Additive Manufacturing of Hierarchical Materials: From Biostructures to Functions
Wei, J., Pan, F., Ping, H., Yang, K., Wang, Y., Wang, Q., & Fu, Z. (2023) · Research · doi:10.34133/research.0164 · Cited by 168
Engineering of Hydrogel Materials with Perfusable Microchannels for Building Vascularized Tissues
Xie, R., Zheng, W., Guan, L., Ai, Y., & Liang, Q. (2020) · Small · doi:10.1002/smll.201902838 · Cited by 167
Application of 3D bioprinting in the prevention and the therapy for human diseases
Yi, H.-G., Kim, H., Kwon, J., Choi, Y.-J., Jang, J., & Cho, D.-W. (2021) · Signal Transduction and Targeted Therapy · doi:10.1038/s41392-021-00566-8 · Cited by 164
Applications of 3D Bioprinting in Tissue Engineering and Regenerative Medicine
Saini, G., Segaran, N. L., Mayer, J., Saini, A., Albadawi, H., & Öklü, R. (2021) · Journal of Clinical Medicine · doi:10.3390/jcm10214966 · Cited by 164
Electroconductive multi-functional polypyrrole composites for biomedical applications
Zare, E. N., Agarwal, T., Zarepour, A., Pinelli, F., Zarrabi, A., Rossi, F., Ashrafizadeh, M., Maleki, A., Shahbazi, M., Maiti, T. K., et al. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101117 · Cited by 162
3D Printing Technologies in Metallic Implants: A Thematic Review on the Techniques and Procedures
Attarilar, S., Ebrahimi, M., Djavanroodi, F., Fu, Y., Wang, L., & Yang, J. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v7i1.306 · Cited by 159
Highlights on Advancing Frontiers in Tissue Engineering
Ashammakhi, N. A., GhavamiNejad, A., Tutar, R., Fricker, A. T. R., Roy, I., Chatzistavrou, X., Apu, E. H., Nguyen, K., Ahsan, T., Pountos, I., et al. (2021) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2021.0012 · Cited by 159
3D printing biomimetic materials and structures for biomedical applications
Zhu, Y., Joralmon, D., Shan, W., Chen, Y., Rong, J., Zhao, H., Xiao, S., & Li, X. (2021) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00117-0 · Cited by 158
Biomaterials for Personalized Cell Therapy
Facklam, A. L., Volpatti, L. R., & Anderson, D. G. (2019) · Advanced Materials · doi:10.1002/adma.201902005 · Cited by 158
Fang, Y., Guo, Y., Wu, B., Liu, Z., Ye, M., Xu, Y., Ji, M., Chen, L., Lu, B., Nie, K., et al. (2023) · Advanced Materials · doi:10.1002/adma.202205082 · Cited by 155
Recent advances in 3D bioprinting of vascularized tissues
Zhang, Y., Kumar, P., Lv, S., Xiong, D., Zhao, H., Cai, Z., & Zhao, X. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109398 · Cited by 155
Zhang, G., Li, W., Yu, M., Huang, H., Wang, Y., Han, Z., Shi, K., Ma, L., Yu, Z., Zhu, X., et al. (2023) · Advanced Science · doi:10.1002/advs.202206264 · Cited by 155
3D Bioprinting Strategies for the Regeneration of Functional Tubular Tissues and Organs
Jeong, H., Nam, H., Jang, J., & Lee, S. (2020) · Bioengineering · doi:10.3390/bioengineering7020032 · Cited by 154
Decarli, M. C., do Amaral, R. L. F., dos Santos, D. P., Tofani, L. B., Katayama, E. T., Rezende, R. A., da Silva, J. V. L., Swiech, K., Suazo, C. A. T., Mota, C., et al. (2021) · Biofabrication · doi:10.1088/1758-5090/abe6f2 · Cited by 153
3D Printing of Hydrogels for Stretchable Ionotronic Devices
Ge, G., Wang, Q., Zhang, Y., Alshareef, H. N., & Dong, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202107437 · Cited by 153
Responsive biomaterials for 3D bioprinting: A review
Fu, Z., Ouyang, L., Xu, R., Yang, Y., & Sun, W. (2022) · Materials Today · doi:10.1016/j.mattod.2022.01.001 · Cited by 153
Granular Hydrogels in Biofabrication: Recent Advances and Future Perspectives
Daly, A. C. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202301388 · Cited by 153
Organ‐on‐a‐Chip: A Preclinical Microfluidic Platform for the Progress of Nanomedicine
Rodrigues, R. O., Sousa, P. C., Gaspar, J., Bañobre‐López, M., Lima, R. A., & Minas, G. M. H. (2020) · Small · doi:10.1002/smll.202003517 · Cited by 144
Drug Delivery Systems in Regenerative Medicine: An Updated Review
Mansour, A., Romani, M., Acharya, A. B., Rahman, B., Verron, É., & Badran, Z. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15020695 · Cited by 144
Emulating Human Tissues and Organs: A Bioprinting Perspective Toward Personalized Medicine
Fonseca, A. C., Melchels, F. P. W., Ferreira, M. J. S., Moxon, S. R., Potjewyd, G., Dargaville, T. R., Kimber, S. J., & Domingos, M. A. N. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00342 · Cited by 143
Mahmood, A., Akram, T., Chen, H., & Chen, S. (2022) · Polymers · doi:10.3390/polym14214698 · Cited by 143
3D Bioprinting at the Frontier of Regenerative Medicine, Pharmaceutical, and Food Industries
Ramadan, Q., & Zourob, M. M. (2021) · Frontiers in Medical Technology · doi:10.3389/fmedt.2020.607648 · Cited by 142
Ng, W. L., An, J., & Chua, C. K. (2024) · Engineering · doi:10.1016/j.eng.2024.01.028 · Cited by 141
Classification, processing, and applications of bioink and 3D bioprinting: A detailed review
Raees, S., Ullah, F., Javed, F. T., Akil, H. M., Khan, M. J., Safdar, M. M., Din, I. U., Alotaibi, M. A., Alharthi, A. I., Bakht, M. A., et al. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123476 · Cited by 140
Biomaterials for Bioprinting Microvasculature
Barrs, R. W., Jia, J., Silver, S. E., Yost, M. J., & Mei, Y. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00027 · Cited by 139
Developments and Opportunities for 3D Bioprinted Organoids
Ya, R., Yang, X. F., Ma, Z., Sun, X., Zhang, Y., Li, W., Yang, H. S., Qiang, L., Yang, Z., Liu, Y., et al. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i3.364 · Cited by 138
Assembling Living Building Blocks to Engineer Complex Tissues
Ouyang, L., Armstrong, J. P. K., Manuel, S.-S., & Stevens, M. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909009 · Cited by 137
3D printing in biomedical engineering: Processes, materials, and applications
Lai, J., Wang, C., & Wang, M. (2021) · Applied Physics Reviews · doi:10.1063/5.0024177 · Cited by 135
Tan, B., Gan, S., Wang, X., Liu, W., & Li, X. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00172h · Cited by 134
An Overview of Extracellular Matrix-Based Bioinks for 3D Bioprinting
Wang, H., Yu, H., Zhou, X., Zhang, J., Zhou, H., Hao, H., Ding, L., Li, H., Gu, Y., Ma, J., et al. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.905438 · Cited by 133
Recent Development in Therapeutic Cardiac Patches
Mei, X., & Cheng, K. (2020) · Frontiers in Cardiovascular Medicine · doi:10.3389/fcvm.2020.610364 · Cited by 132
Recreating the heart's helical structure-function relationship with focused rotary jet spinning
Chang, H., Liu, Q., Zimmerman, J. F., Lee, K. Y., Jin, Q., Peters, M. M., Rosnach, M., Choi, S., Kim, S. L., Ardoña, H. A. M., et al. (2022) · Science · doi:10.1126/science.abl6395 · Cited by 131
Solid Organ Bioprinting: Strategies to Achieve Organ Function
Jorgensen, A. M., Yoo, J. J., & Atala, A. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00145 · Cited by 130
Applications, advancements, and challenges of 3D bioprinting in organ transplantation
Huang, G., Zhao, Y., Chen, D., Wei, L., Hu, Z., Li, J., Zhou, X., Yang, B., & Chen, Z. (2024) · Biomaterials Science · doi:10.1039/d3bm01934a · Cited by 130
Biocompatibility of Biomaterials for Tissue Regeneration or Replacement
Raut, H. K., Das, R., Liu, Z., Liu, X., & Ramakrishna, S. (2020) · Biotechnology Journal · doi:10.1002/biot.202000160 · Cited by 129
3D Tissue and Organ Printing—Hope and Reality
Shapira, A., & Dvir, T. (2021) · Advanced Science · doi:10.1002/advs.202003751 · Cited by 129
Self-citation3D printing dendrite-free lithium anodes based on the nucleated MXene arrays
Shen, K. B., Li, B., & Yang, S. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.08.015 · Cited by 126
Fang, Y., Guo, Y., Ji, M., Li, B., Guo, Y., Zhu, J., Zhang, T., & Xiong, Z. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202109810 · Cited by 126
3D Printing of Pharmaceutical Application: Drug Screening and Drug Delivery
Gao, G., Ahn, M., Cho, W.-W., Kim, B.-S., & Cho, D. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13091373 · Cited by 122
Functional hydrogels for the treatment of myocardial infarction
Wu, T., & Liu, W. (2022) · NPG Asia Materials · doi:10.1038/s41427-021-00330-y · Cited by 122
3D‐Printed Polymeric Biomaterials for Health Applications
Zhu, Y., Guo, S., Ravichandran, D., Ramanathan, A., Sobczak, M. T., Sacco, A. F., Patil, D., Thummalapalli, S. V., Pulido, T. V., Lancaster, J. N., et al. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202402571 · Cited by 122
Bioresorbable Polymeric Scaffold in Cardiovascular Applications
Toong, D. W. Y., Toh, H. W., Ng, J. C. K., Wong, P. E. H., Leo, H. L., Venkatraman, S. S., Tan, L. P., Ang, H. Y., & Huang, Y. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21103444 · Cited by 120
Metadata
- Authors
- Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T.
- Affiliations
- Tel Aviv University (IL)
- Corresponding author
- Dvir, Tal
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2019-04-15
- Volume
- 6
- Issue
- 11
- Pages
- 1900344-1900344
- ISSN
- 2198-3844 (ISSN-L)
- PMC
- PMC6548966
- OpenAlex
- W2937820813
- Cited by
- 1,042
- References
- 36
- Citations by year
- 2026: 59 · 2025: 106 · 2024: 126 · 2023: 187 · 2022: 157 · 2021: 212 · 2020: 142 · 2019: 51
- FWCI
- 49.47
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Advanced Science (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- European Research Council (637943)
- Israel Science Foundation (700/13)
- Ministry of Science, Technology and Space (3‐12587)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, cardiac tissue engineering, personalized medicine, pluripotent stem cells, cardiomyocytes, endothelial cells, extracellular matrix hydrogel, bioinks, cardiac cell transplantation, drug screening, organ printing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.