3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Open accessThe DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
Generation of thick vascularized tissues that fully match the patient still remains an unmet challenge in cardiac tissue engineering. Here, a simple approach to 3D‐print thick, vascularized, and perfusable cardiac patches that completely match the immunological, cellular, biochemical, and anatomical properties of the patient is reported. To this end, a biopsy of an omental tissue is taken from patients. While the cells are reprogrammed to become pluripotent stem cells, and differentiated to cardiomyocytes and endothelial cells, the extracellular matrix is processed into a personalized hydrogel. Following, the two cell types are separately combined with hydrogels to form bioinks for the parenchymal cardiac tissue and blood vessels. The ability to print functional vascularized patches according to the patient's anatomy is demonstrated. Blood vessel architecture is further improved by mathematical modeling of oxygen transfer. The structure and function of the patches are studied in vitro, and cardiac cell morphology is assessed after transplantation, revealing elongated cardiomyocytes with massive actinin striation. Finally, as a proof of concept, cellularized human hearts with a natural architecture are printed. These results demonstrate the potential of the approach for engineering personalized tissues and organs, or for drug screening in an appropriate anatomical structure and patient‐specific biochemical microenvironment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The fact that macroscale contractile function has not yet been achieved in a 3D printed, perfusable, chambered heart model reflects the challenges associated with handling mature cardiac muscle cells.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Yet, inclusion of contiguous, living muscle to support pump function has not been achieved.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Multiple studies have demonstrated the capacity to print entire heart organ models using biological materials, but the resulting constructs have either lacked cells8, 9 or evidence of electromechanical function18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heart Disease and Stroke Statistics—2017 Update: A Report From the American Heart Association
Benjamin, E. J., Blaha, M. J., Chiuve, S. E., Cushman, M., Das, S. R., Deo, R., de Ferranti, S. D., Floyd, J., Fornage, M., Gillespie, C., et al. (2017) · Circulation · doi:10.1161/cir.0000000000000485 · Cited by 12,591
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Lian, X., Hsiao, C., Wilson, G., Zhu, K., Hazeltine, L. B., Azarin, S. M., Raval, K. K., Zhang, J., Kamp, T. J., & Palecek, S. P. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1200250109 · Cited by 1,717
Scaffolding in tissue engineering: general approaches and tissue-specific considerations
Chan, B. P., & Leong, K. W. (2008) · European Spine Journal · doi:10.1007/s00586-008-0745-3 · Cited by 1,708
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Nanotechnological strategies for engineering complex tissues
Dvir, T., Timko, B. P., Kohane, D. S., & Langer, R. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.246 · Cited by 1,367
Self-citation
Research works printed but not linked: 1
- Members W. G., 2017, Circulation, 135, e146
Cited by
Items 101–200 of 1,000
Engineered assistive materials for 3D bioprinting: support baths and sacrificial inks
Brunel, L. G., Hull, S. M., & Heilshorn, S. C. (2022) · Biofabrication · doi:10.1088/1758-5090/ac6bbe · Cited by 118
Composite Hydrogels in Three-Dimensional in vitro Models
Zhao, Z., Vizetto‐Duarte, C., Moay, Z. K., Setyawati, M. I., Rakshit, M., Kathawala, M. H., & Ng, K. W. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00611 · Cited by 117
Cui, C., Kim, D.-O., Pack, M. Y., Han, B., Han, L., Sun, Y., & Han, L. (2020) · Biofabrication · doi:10.1088/1758-5090/aba502 · Cited by 117
Fang, Y., Guo, Y., Liu, T., Xu, R., Mao, S., Mo, X., Zhang, T., Ouyang, L., Xiong, Z., & Sun, W. (2022) · Chinese Journal of Mechanical Engineering Additive Manufacturing Frontiers · doi:10.1016/j.cjmeam.2022.100011 · Cited by 117
Li, T., Hou, J., Wang, L., Zeng, G., Wang, Z., Yu, L., Yang, Q., Yin, J., Long, M., Chen, L., et al. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.08.037 · Cited by 116
In Vitro Strategies to Vascularize 3D Physiologically Relevant Models
Dellaquila, A., Le Bao, C., Letourneur, D., & Simon‐Yarza, T. (2021) · Advanced Science · doi:10.1002/advs.202100798 · Cited by 115
Burdis, R., & Kelly, D. J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.03.016 · Cited by 115
Organoid bioprinting: from cells to functional tissues
Huang, M. S., Christakopoulos, F., Roth, J. G., & Heilshorn, S. C. (2024) · Nature Reviews Bioengineering · doi:10.1038/s44222-024-00268-0 · Cited by 114
Yang, X., Ma, Y., Wang, X., Yuan, S., Huo, F., Yi, G., Zhang, J., Yang, B., & Tian, W. (2022) · Advanced Science · doi:10.1002/advs.202205041 · Cited by 113
A review on 3D printing techniques for medical applications
Nadagouda, M. N., Rastogi, V., & Ginn, M. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.05.007 · Cited by 111
Recent progress of 3D-printed microneedles for transdermal drug delivery
Yang, Q., Zhong, W., Xu, L., Li, H., Yan, Q., She, Y., & Yang, G. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.120106 · Cited by 111
Photo-crosslinkable amniotic membrane hydrogel for skin defect healing
Zhang, Q., Chang, C., Qian, C., Xiao, W., Zhu, H., Guo, J., Meng, Z., Cui, W., & Ge, Z. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.02.043 · Cited by 107
Harley, W. S., Li, C. C., Toombs, J. T., O’Connell, C. D., Taylor, H., Heath, D. E., & Collins, D. J. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00147 · Cited by 110
Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends
Tong, A., Pham, Q. L., Abatemarco, P., Mathew, A., Gupta, D., Iyer, S., & Voronov, R. S. (2021) · SLAS TECHNOLOGY · doi:10.1177/24726303211020297 · Cited by 109
Embedded extrusion printing in yield-stress-fluid baths
Wu, Q. H., Song, K., Zhang, D., Ren, B., Sole‐Gras, M., Huang, Y. H., & Yin, J. (2022) · Matter · doi:10.1016/j.matt.2022.09.003 · Cited by 107
Grafting of 3D Bioprinting to In Vitro Drug Screening: A Review
Nie, J., Gao, Q., Fu, J., & He, Y. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901773 · Cited by 106
3D Printing of Bioinspired Biomaterials for Tissue Regeneration
Li, T., Chang, J., Zhu, Y., & Wu, C. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202000208 · Cited by 104
Wu, Y., Wenger, A., Golzar, H., & Tang, X. S. (2020) · Scientific Reports · doi:10.1038/s41598-020-77146-3 · Cited by 104
3D Bioprinting using UNIversal Orthogonal Network (UNION) Bioinks
Hull, S. M., Lindsay, C. D., Brunel, L. G., Shiwarski, D. J., Tashman, J. W., Roth, J. G., Myung, D. J., Feinberg, A. W., & Heilshorn, S. C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007983 · Cited by 105
Pushing the rheological and mechanical boundaries of extrusion-based 3D bioprinting
Ouyang, L. (2022) · Trends in biotechnology · doi:10.1016/j.tibtech.2022.01.001 · Cited by 104
Bertassoni, L. E. (2021) · Advanced Materials · doi:10.1002/adma.202101321 · Cited by 103
Cellular and Engineered Organoids for Cardiovascular Models
Thomas, D., Choi, S., Alamana, C., Parker, K. K., & Wu, J. C. (2022) · Circulation Research · doi:10.1161/circresaha.122.320305 · Cited by 104
A mini-review of embedded 3D printing: supporting media and strategies
Zhao, J., & He, N. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb01819h · Cited by 102
Heo, D. N., Alioglu, M. A., Wu, Y. B., Özbolat, V., Ayan, B., Dey, M., Kang, Y.-N., & Ozbolat, I. T. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c05096 · Cited by 101
Carpio, M. B., Dabaghi, M., Ungureanu, J., Kolb, M. R. J., Hirota, J. A., & Moran-Mirabal, J. M. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.773511 · Cited by 101
Multifunctional 3D‐Printed Patches for Long‐Term Drug Release Therapies after Myocardial Infarction
Ajdary, R., Ezazi, N. Z., Correia, A., Kemell, M., Huan, S., Ruskoaho, H. J., Hirvonen, J. J., Santos, H. A., & Rojas, O. J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003440 · Cited by 100
Complex 3D bioprinting methods
Ji, S., & Güvendiren, M. (2021) · APL Bioengineering · doi:10.1063/5.0034901 · Cited by 100
Multimaterial Multinozzle Adaptive 3D Printing of Soft Materials
Uzel, S. G. M., Weeks, R. D., Eriksson, M., Kokkinis, D., & Lewis, J. A. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101710 · Cited by 100
Wu, C. A., Zhu, Y., & Woo, Y.-P. J. (2023) · Bioengineering · doi:10.3390/bioengineering10070842 · Cited by 100
Tissue Engineering and Regenerative Medicine 2019: The Role of Biofabrication—A Year in Review
Ramos, T., & Moroni, L. (2019) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2019.0344 · Cited by 99
Parihar, A., Pandita, V., Kumar, A., Parihar, D. S., Puranik, N., Bajpai, T., & Khan, R. (2021) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-021-00219-w · Cited by 100
Primitive macrophages enable long-term vascularization of human heart-on-a-chip platforms
Landau, S., Zhao, Y., Hamidzada, H., Kent, G. M., Okhovatian, S., Lu, R. X. Z., Liu, C., Wagner, K. T., Cheung, K., Shawky, S. A., et al. (2024) · Cell stem cell · doi:10.1016/j.stem.2024.05.011 · Cited by 99
Object-space optimization of tomographic reconstructions for additive manufacturing
Rackson, C. M., Champley, K., Toombs, J. T., Fong, E. J., Bansal, V., Taylor, H., Shusteff, M., & McLeod, R. R. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102367 · Cited by 98
Utama, R. H., Atapattu, L., O’Mahony, A. P., Fife, C. M., Baek, J., Allard, T., O'Mahony, K. J., Ribeiro, J. C. C., Gaus, K., Kavallaris, M., et al. (2020) · iScience · doi:10.1016/j.isci.2020.101621 · Cited by 98
Cardiac Tissues From Stem Cells: New Routes to Maturation and Cardiac Regeneration
Campostrini, G., Windt, L. M., van Meer, B. J., Bellin, M., & Mummery, C. L. (2021) · Circulation Research · doi:10.1161/circresaha.121.318183 · Cited by 96
Strategies to Promote Vascularization in 3D Printed Tissue Scaffolds: Trends and Challenges
Joshi, A., Choudhury, S., Gugulothu, S. B., Visweswariah, S. S., & Chatterjee, K. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c00423 · Cited by 96
Freeform 3D printing using a continuous viscoelastic supporting matrix
Patrício, S. G., Sousa, L. R., Correia, T. R., Gaspar, V. M., Pires, L. S. O., Luís, J. L., Oliveira, J. M., & Mano, J. F. (2020) · Biofabrication · doi:10.1088/1758-5090/ab8bc3 · Cited by 95
Embedded bioprinting for designer 3D tissue constructs with complex structural organization
Zeng, X., Meng, Z., He, J., Mao, M., Li, X., Chen, P., Fan, J., & Li, D. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.11.048 · Cited by 95
Bioprinting of in vitro tumor models for personalized cancer treatment: a review
Mao, S., Pang, Y., Liu, T., Shao, Y., He, J., Yang, H., Mao, Y., & Sun, W. (2020) · Biofabrication · doi:10.1088/1758-5090/ab97c0 · Cited by 94
Electroconductive Nanobiomaterials for Tissue Engineering and Regenerative Medicine
Mostafavi, E., Medina-Cruz, D., Kalantari, K., Taymoori, A., Soltantabar, P., & Webster, T. J. (2020) · Bioelectricity · doi:10.1089/bioe.2020.0021 · Cited by 94
Regenerative medicine for skeletal muscle loss: a review of current tissue engineering approaches
Langridge, B., Griffin, M., & Butler, P. E. M. (2021) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-020-06476-5 · Cited by 94
Perfusion and endothelialization of engineered tissues with patterned vascular networks
Kinstlinger, I. S., Calderon, G. A., Royse, M. K., Means, A. K., Grigoryan, B., & Miller, J. S. (2021) · Nature Protocols · doi:10.1038/s41596-021-00533-1 · Cited by 94
High‐throughput 3D bioprinting of corneal stromal equivalents
Kutlehria, S., Dinh, T. C., Bagde, A., Patel, N., Gebeyehu, A., & Singh, M. S. (2020) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34628 · Cited by 92
Bhattacharyya, A., Janarthanan, G., & Noh, I. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101639 · Cited by 92
Biomaterials Based on Marine Resources for 3D Bioprinting Applications
Zhang, Y., Zhou, D., Chen, J., Zhang, X., Li, X., Zhao, W., & Xu, T. (2019) · Marine Drugs · doi:10.3390/md17100555 · Cited by 92
Modeling Cardiovascular Diseases with hiPSC-Derived Cardiomyocytes in 2D and 3D Cultures
Sacchetto, C., Vitiello, L., de Windt, L. J., Rampazzo, A., & Calore, M. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21093404 · Cited by 91
Ng, W. L., Huang, X., Shkolnikov, V., Suntornnond, R., & Yeong, W. Y. (2023) · Bio-Design and Manufacturing · doi:10.1007/s42242-023-00245-3 · Cited by 91
Application of 3D- printed hydrogels in wound healing and regenerative medicine
Deptuła, M., Zawrzykraj, M., Sawicka, J., Banach‐Kopeć, A., Tylingo, R., & Pikuła, M. (2023) · Biomedicine & Pharmacotherapy · doi:10.1016/j.biopha.2023.115416 · Cited by 91
3D printed nanomaterial-based electronic, biomedical, and bioelectronic devices
Hales, S. H., Tokita, E., Neupane, R., Ghosh, U., Elder, B., Wirthlin, D. J., & Kong, Y. L. (2019) · Nanotechnology · doi:10.1088/1361-6528/ab5f29 · Cited by 91
Emerging Functional Biomaterials as Medical Patches
Wang, Y., Chen, G., Zhang, H., Zhao, C., Sun, L., & Zhao, Y. (2021) · ACS Nano · doi:10.1021/acsnano.0c10724 · Cited by 90
Cardiac organoid — a promising perspective of preclinical model
Zhao, D., Lei, W., & Hu, S. (2021) · Stem Cell Research & Therapy · doi:10.1186/s13287-021-02340-7 · Cited by 90
Zhao, H., Xu, J., Yuan, H., Zhang, E., Dai, N., Gao, Z., Huang, Y., Lv, F., Liu, L., Gu, Q., et al. (2021) · Materials Horizons · doi:10.1039/d1mh00508a · Cited by 90
Carotenuto, F., Politi, S., Haq, A. U., Matteis, F. D., Tamburri, E., Terranova, M. L., Teodori, L., Pasquo, A., & Nardo, P. D. (2022) · Micromachines · doi:10.3390/mi13050780 · Cited by 90
Vernengo, J., Grad, S., Eglin, D., Alini, M., & Li, Z. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909044 · Cited by 89
Advances in smart hybrid scaffolds: A strategic approach for regenerative clinical applications
Khan, A. R., Gholap, A. D., Grewal, N. S., Jun, Z., Khalid, M., & Zhang, H. (2025) · Engineered Regeneration · doi:10.1016/j.engreg.2025.02.002 · Cited by 89
Freeform 3D printing of soft matters: recent advances in technology for biomedical engineering
Chen, S., Tan, W. S., Juhari, M. A. B., Shi, Q., Cheng, X. S., Chan, W. L., & Song, J. (2020) · Biomedical Engineering Letters · doi:10.1007/s13534-020-00171-8 · Cited by 88
Recent advancements in the bioprinting of vascular grafts
Fazal, F., Raghav, S., Callanan, A., Koutsos, V., & Radacsi, N. (2021) · Biofabrication · doi:10.1088/1758-5090/ac0963 · Cited by 88
Bioink design for extrusion-based bioprinting
Zhang, T., Zhao, W., Xiahou, Z., Wang, X., Zhang, K., & Yin, J. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101227 · Cited by 88
Augustine, R., Dan, P., Hasan, A., Khalaf, I., Prasad, P., Ghosal, K., Gentile, C., McClements, L., & Maureira, P. (2021) · Biomedicine & Pharmacotherapy · doi:10.1016/j.biopha.2021.111425 · Cited by 87
Fabrication and Characterization of 3D Bioprinted Triple-layered Human Alveolar Lung Models
Ng, W. L., Ayi, T. C., Liu, Y.-C., Sing, S. L., Yeong, W. Y., & Tan, B. H. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i2.332 · Cited by 87
3D bioprinting strategy for engineering vascularized tissue models
Chae, S., Ha, D., & Lee, H. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.748 · Cited by 87
Bioprinting Neural Systems to Model Central Nervous System Diseases
Qiu, B., Bessler, N., Figler, K. P., Buchholz, M., Rios, A. C., Malda, J., Levato, R., & Caiazzo, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910250 · Cited by 86
3D printing of milk-based product
Lee, C. P., Karyappa, R. B., & Hashimoto, M. (2020) · RSC Advances · doi:10.1039/d0ra05035k · Cited by 86
Advanced Polymers for Three-Dimensional (3D) Organ Bioprinting
Wang, X. (2019) · Micromachines · doi:10.3390/mi10120814 · Cited by 86
Tavafoghi, M., Darabi, M. A., Mahmoodi, M., Tutar, R., Xu, C., Mirjafari, A., Billi, F., Święszkowski, W., Nasrollahi, F., Ahadian, S., et al. (2021) · Biofabrication · doi:10.1088/1758-5090/ac0b9a · Cited by 85
Zhuang, R. Z., Lock, R., Liu, B., & Vunjak-Novakovic, G. (2022) · Nature Biomedical Engineering · doi:10.1038/s41551-022-00885-3 · Cited by 84
Bioengineering approaches to treat the failing heart: from cell biology to 3D printing
Yadid, M., Oved, H., Silberman, E., & Dvir, T. (2022) · Nature Reviews Cardiology · doi:10.1038/s41569-021-00603-7 · Cited by 83
Self-citationBioprinting Methods for Fabricating In Vitro Tubular Blood Vessel Models
Kim, S. J., Kim, M.-G., Kim, J., Jeon, J. S., Park, J., & Yi, H. (2023) · Cyborg and Bionic Systems · doi:10.34133/cbsystems.0043 · Cited by 83
Chitosans for Tissue Repair and Organ Three-Dimensional (3D) Bioprinting
Li, S., Tian, X., Fan, J., Tong, H., Ao, Q., & Wang, X. (2019) · Micromachines · doi:10.3390/mi10110765 · Cited by 83
Hydrogels for 3D embedded bioprinting: a focused review on bioinks and support baths
Zhou, K., Sun, Y., Yang, J., Mao, H., & Gu, Z. (2022) · Journal of Materials Chemistry B · doi:10.1039/d1tb02554f · Cited by 82
3D Bioprinting of Human Hollow Organs
Panja, N., Maji, S., Choudhuri, S., Ali, K. A., & Hossain, C. M. (2022) · AAPS PharmSciTech · doi:10.1208/s12249-022-02279-9 · Cited by 82
Application of biomedical materials in the diagnosis and treatment of myocardial infarction
Zhang, J., Guo, Y., Bai, Y., & Wei, Y. (2023) · Journal of Nanobiotechnology · doi:10.1186/s12951-023-02063-2 · Cited by 82
Recent Applications of Three Dimensional Printing in Cardiovascular Medicine
Gardin, C., Ferroni, L., Latremouille, C., Chachques, J. C., Mitrečić, D., & Zavan, B. (2020) · Cells · doi:10.3390/cells9030742 · Cited by 75
Chen, L., Zhang, Y., Ye, H., Duan, G., Duan, H., Ge, Q., & Wang, Z. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c02656 · Cited by 80
Hwang, D. G., Choi, Y., & Jang, J. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.685507 · Cited by 80
Three‐dimensional printing: The potential technology widely used in medical fields
Li, H., Fan, W., & Zhu, X. M. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36979 · Cited by 79
Agarwal, T., Onesto, V., Banerjee, D., Guo, S., Polini, A., Vogt, C. D., Viswanath, A., Esworthy, T. J., Cui, H., O'Donnell, A., et al. (2025) · Biofabrication · doi:10.1088/1758-5090/ade47a · Cited by 79
Stem Cells for Next Level Toxicity Testing in the 21st Century
Fritsche, E., Haarmann‐Stemmann, T., Kapr, J., Galanjuk, S., Hartmann, J., Mertens, P. R., Kämpfer, A. A. M., Schins, R. P. F., Tigges, J., & Koch, K. (2021) · Small · doi:10.1002/smll.202006252 · Cited by 75
Mazzola, M., & Pasquale, E. D. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00455 · Cited by 78
Ma, Y., Deng, B., He, R., & Huang, P. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e24593 · Cited by 78
One‐Step 3D Printing of Heart Patches with Built‐In Electronics for Performance Regulation
Asulin, M., Michael, I., Shapira, A., & Dvir, T. (2021) · Advanced Science · doi:10.1002/advs.202004205 · Cited by 77
Self-citationRoche, C. D., Sharma, P., Ashton, A., Jackson, C. J., Xue, M., & Gentile, C. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.636257 · Cited by 76
Liu, Y., Zhang, Y., Mei, T., Cao, H., Hu, Y., Jia, W., Wang, J., Zhang, Z., Wang, Z., Le, W., et al. (2022) · Advanced Science · doi:10.1002/advs.202104299 · Cited by 76
Suntornnond, R., Ng, W. L., Huang, X., Yeow, C. H. E., & Yeong, W. Y. (2022) · Journal of Materials Chemistry B · doi:10.1039/d2tb00442a · Cited by 76
3D bioprinting: Materials, processes, and applications
Bártolo, P., Malshe, A. P., Ferraris, E., & Koç, B. (2022) · CIRP Annals · doi:10.1016/j.cirp.2022.06.001 · Cited by 77
Direct 3D‐Bioprinting of hiPSC‐Derived Cardiomyocytes to Generate Functional Cardiac Tissues
Esser, T. U., Anspach, A., Muenzebrock, K. A., Kah, D., Schrüfer, S., Schenk, J., Heinze, K. G., Schubert, D. W., Fabry, B., & Engel, F. B. (2023) · Advanced Materials · doi:10.1002/adma.202305911 · Cited by 75
Granular hydrogels for 3D bioprinting applications
Cheng, W., Zhang, J., Liu, J., & Yu, Z. (2020) · View · doi:10.1002/viw.20200060 · Cited by 75
Fluid Bath-Assisted 3D Printing for Biomedical Applications: From Pre- to Postprinting Stages
Hua, W., Mitchell, K., Raymond, L., Godina, B., Zhao, D., Zhou, W., & Jin, Y. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00910 · Cited by 74
Debbi, L., Zohar, B., Shuhmaher, M., Shandalov, Y., Goldfracht, I., & Levenberg, S. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.121286 · Cited by 74
Beyond Tissue replacement: The Emerging role of smart implants in healthcare
Abyzova, E., Dogadina, E., Rodriguez, R. D. D., Petrov, I., Kolesnikova, Y., Zhou, M., Liu, C., & Sheremet, E. S. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100784 · Cited by 75
Cells, Materials, and Fabrication Processes for Cardiac Tissue Engineering
Montero, P., Flandes‐Iparraguirre, M., Musquiz, S., Pérez-Araluce, M., Plano, D., Sanmartín, C., Orive, G., Gavira, J. J., Prósper, F., & Mazo, M. M. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00955 · Cited by 74
Recent advances in bioprinting technologies for engineering hepatic tissue
Agarwal, T., Banerjee, D., Konwarh, R., Esworthy, T., Kumari, J., Onesto, V., Das, P., Lee, B. H., Wagener, F. A. D. T. G., Makvandi, P., et al. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2021.112013 · Cited by 66
Tashman, J. W., Shiwarski, D. J., Coffin, B. D., Ruesch, A., Lanni, F., Kainerstorfer, J. M., & Feinberg, A. W. (2022) · Biofabrication · doi:10.1088/1758-5090/ac975e · Cited by 73
3D-bioprinted human tissue and the path toward clinical translation
Bliley, J. M., Shiwarski, D. J., & Feinberg, A. W. (2022) · Science Translational Medicine · doi:10.1126/scitranslmed.abo7047 · Cited by 73
Recent Advances in Cardiac Patches: Materials, Preparations, and Properties
Zhang, Y., Mu, W., Zhang, Y., He, X., Wang, Y., Ma, H., Zhu, T., Li, A., Hou, Q., Yang, W., et al. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00348 · Cited by 72
Nie, N., Gong, L., Jiang, D., Liu, Y., Zhang, J., Xu, J., Yao, X., Wu, B., Li, Y., & Zou, X. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.12.016 · Cited by 72
A Custom Ultra-Low-Cost 3D Bioprinter Supports Cell Growth and Differentiation
Ioannidis, K., Danalatos, R.-I., Tsaniras, S. C., Kaplani, K., Lokka, G., Kanellou, A., Papachristou, D. J., Bokias, G., Lygerou, Z., & Taraviras, S. L. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.580889 · Cited by 72
Harnessing organs-on-a-chip to model tissue regeneration
Tavakol, D. N., Fleischer, S., & Vunjak‐Novakovic, G. (2021) · Cell stem cell · doi:10.1016/j.stem.2021.05.008 · Cited by 72
Engineering in vitro vascular microsystems
Liu, Q., Ying, G., Hu, C., Du, L., Zhang, H., Wang, Z., Yue, H., Yetisen, A. K., Wang, G., Shen, Y., et al. (2025) · Microsystems & Nanoengineering · doi:10.1038/s41378-025-00956-w · Cited by 71
Recent advances in bioprinting technologies for engineering cardiac tissue
Agarwal, T., Fortunato, G. M., Hann, S.-Y., Ayan, B., Vajanthri, K. Y., Presutti, D., Cui, H., Chan, A., Costantini, M., Onesto, V., et al. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112057 · Cited by 71
Metadata
- Authors
- Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T.
- Affiliations
- Tel Aviv University (IL)
- Corresponding author
- Dvir, Tal
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2019-04-15
- Volume
- 6
- Issue
- 11
- Pages
- 1900344-1900344
- ISSN
- 2198-3844 (ISSN-L)
- PMC
- PMC6548966
- OpenAlex
- W2937820813
- Cited by
- 1,042
- References
- 36
- Citations by year
- 2026: 59 · 2025: 106 · 2024: 126 · 2023: 187 · 2022: 157 · 2021: 212 · 2020: 142 · 2019: 51
- FWCI
- 49.47
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Advanced Science (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- European Research Council (637943)
- Israel Science Foundation (700/13)
- Ministry of Science, Technology and Space (3‐12587)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, cardiac tissue engineering, personalized medicine, pluripotent stem cells, cardiomyocytes, endothelial cells, extracellular matrix hydrogel, bioinks, cardiac cell transplantation, drug screening, organ printing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.