3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Open accessThe DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
Generation of thick vascularized tissues that fully match the patient still remains an unmet challenge in cardiac tissue engineering. Here, a simple approach to 3D‐print thick, vascularized, and perfusable cardiac patches that completely match the immunological, cellular, biochemical, and anatomical properties of the patient is reported. To this end, a biopsy of an omental tissue is taken from patients. While the cells are reprogrammed to become pluripotent stem cells, and differentiated to cardiomyocytes and endothelial cells, the extracellular matrix is processed into a personalized hydrogel. Following, the two cell types are separately combined with hydrogels to form bioinks for the parenchymal cardiac tissue and blood vessels. The ability to print functional vascularized patches according to the patient's anatomy is demonstrated. Blood vessel architecture is further improved by mathematical modeling of oxygen transfer. The structure and function of the patches are studied in vitro, and cardiac cell morphology is assessed after transplantation, revealing elongated cardiomyocytes with massive actinin striation. Finally, as a proof of concept, cellularized human hearts with a natural architecture are printed. These results demonstrate the potential of the approach for engineering personalized tissues and organs, or for drug screening in an appropriate anatomical structure and patient‐specific biochemical microenvironment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The fact that macroscale contractile function has not yet been achieved in a 3D printed, perfusable, chambered heart model reflects the challenges associated with handling mature cardiac muscle cells.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Yet, inclusion of contiguous, living muscle to support pump function has not been achieved.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Multiple studies have demonstrated the capacity to print entire heart organ models using biological materials, but the resulting constructs have either lacked cells8, 9 or evidence of electromechanical function18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heart Disease and Stroke Statistics—2017 Update: A Report From the American Heart Association
Benjamin, E. J., Blaha, M. J., Chiuve, S. E., Cushman, M., Das, S. R., Deo, R., de Ferranti, S. D., Floyd, J., Fornage, M., Gillespie, C., et al. (2017) · Circulation · doi:10.1161/cir.0000000000000485 · Cited by 12,591
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Lian, X., Hsiao, C., Wilson, G., Zhu, K., Hazeltine, L. B., Azarin, S. M., Raval, K. K., Zhang, J., Kamp, T. J., & Palecek, S. P. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1200250109 · Cited by 1,717
Scaffolding in tissue engineering: general approaches and tissue-specific considerations
Chan, B. P., & Leong, K. W. (2008) · European Spine Journal · doi:10.1007/s00586-008-0745-3 · Cited by 1,708
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Nanotechnological strategies for engineering complex tissues
Dvir, T., Timko, B. P., Kohane, D. S., & Langer, R. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.246 · Cited by 1,367
Self-citation
Research works printed but not linked: 1
- Members W. G., 2017, Circulation, 135, e146
Cited by
Items 501–600 of 1,000
Bekhite, M. M., & Schulze, P. C. (2021) · Cells · doi:10.3390/cells10123483 · Cited by 25
Zeng, Q., Yang, Y., Wang, H., Tan, Y., Wang, Z., Chai, M., Lu, Z., He, S., Yang, H., Zhang, J. Z., et al. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123573 · Cited by 24
Technical Aspects and Development of Transcatheter Aortic Valve Implantation
Steblovnik, K., & Bunc, M. (2022) · Journal of Cardiovascular Development and Disease · doi:10.3390/jcdd9080282 · Cited by 23
Extracellular Matrix-Based Approaches in Cardiac Regeneration: Challenges and Opportunities
Vu, T. V. A., Lorizio, D., Vuerich, R., Lippi, M., Nascimento, D. S., & Zacchigna, S. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms232415783 · Cited by 23
Poulis, N., Zaytseva, P., Gähwiler, E. K. N., Motta, S. E., Fioretta, E. S., Cesarovic, N., Falk, V., Hoerstrup, S. P., & Emmert, M. Y. (2020) · Expert Review of Cardiovascular Therapy · doi:10.1080/14779072.2020.1792777 · Cited by 23
Manufacturing of animal products by the assembly of microfabricated tissues
Jo, B., Nie, M., & Takeuchi, S. (2021) · Essays in Biochemistry · doi:10.1042/ebc20200092 · Cited by 23
Bejleri, D., Robeson, M. J., Brown, M. E., Hunter, J. D., Maxwell, J. T., Streeter, B. W., Brazhkina, O., Park, H., Christman, K. L., & Davis, M. E. (2021) · Biomaterials Science · doi:10.1039/d1bm01539g · Cited by 23
Matthews, N., Pandolfo, B., Moses, D. A., & Gentile, C. (2022) · Bioengineering · doi:10.3390/bioengineering9030093 · Cited by 23
Bubble-based microrobots enable digital assembly of heterogeneous microtissue modules
Ge, Z., Dai, L., Zhao, J., Yu, H., Yang, W., Liao, X., Tan, W., Jiao, N., Wang, Z., & Liu, L. (2022) · Biofabrication · doi:10.1088/1758-5090/ac5be1 · Cited by 23
Zhang, B., Luo, Y., Zhou, X., Gao, L., Yin, X., & Yang, H. (2024) · APL Bioengineering · doi:10.1063/5.0182585 · Cited by 22
3D printable sustainable hydrogel formulations for tissue engineering applications
Porwal, S., Sridhar, S. B., Talath, S., Wali, A. F., Warsi, M. H., & Malviya, R. (2024) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2024.106308 · Cited by 22
3D Bioprinting in Cancer Modeling and Biomedicine: From Print Categories to Biological Applications
Yang, J., Wang, L., Wu, R., He, Y., Zhao, Y., Wang, W., Gao, X., Wang, D., Zhao, L., & Li, W. (2024) · ACS Omega · doi:10.1021/acsomega.4c06051 · Cited by 22
Bioprinting approaches in cardiac tissue engineering to reproduce blood-pumping heart function
Kim, M. J., Hwang, D. G., & Jang, J. (2024) · iScience · doi:10.1016/j.isci.2024.111664 · Cited by 22
Huang, X., Da-Wei, F., Zha, X., Ling, T., & Huang, J. (2025) · APL Materials · doi:10.1063/5.0278581 · Cited by 22
Zhao, H., Xu, J., Zhang, E., Qi, R., Huang, Y., Lv, F., Liu, L., Gu, Q., & Wang, S. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c04967 · Cited by 22
Shen, Y., Cui, J., Xiao, Y., Song, J., Cai, P., Guo, W., Zhao, Y., Wu, J., Gu, H., Sun, B., et al. (2023) · Smart Materials in Medicine · doi:10.1016/j.smaim.2023.07.001 · Cited by 22
Aizarna‐Lopetegui, U., García‐Astrain, C., Renero‐Lecuna, C., González‐Callejo, P., Villaluenga, I., del Pozo, M. Á., Sánchez‐Álvarez, M., Henriksen‐Lacey, M., & de Aberasturi, D. J. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb01480k · Cited by 22
Khanna, A., Oropeza, B. P., & Huang, N. F. (2023) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37602 · Cited by 22
Harnessing native blueprints for designing bioinks to bioprint functional cardiac tissue
Akter, M. Z., Tufail, F., Ahmad, A., Oh, Y. W., Kim, J. M., Kim, S., Hasan, M. M., Li, L., Lee, D., Kim, Y. S., et al. (2025) · iScience · doi:10.1016/j.isci.2025.111882 · Cited by 22
State of the Art: Tissue Engineering in Congenital Heart Surgery
Boyd, R., Parisi, F., & Kalfa, D. M. (2019) · Seminars in Thoracic and Cardiovascular Surgery · doi:10.1053/j.semtcvs.2019.05.023 · Cited by 22
Arif, M., Nabavizadeh, P., Song, T., Desai, D. A., Singh, R. R., Bazrafshan, S., Kumar, M., Wang, Y., Gilbert, R., Dhandapany, P. S., et al. (2020) · Biophysical Reviews · doi:10.1007/s12551-020-00725-1 · Cited by 22
Cardiovascular microphysiological systems (CVMPS) for safety studies – a pharma perspective
Pointon, A., Maher, J. M., Davis, M., Baker, T. K., Cichocki, J. A., Ramsden, D., Hale, C. M., Kolaja, K. L., Lévesque, P., Sura, R., et al. (2021) · Lab on a Chip · doi:10.1039/d0lc01040e · Cited by 22
Sampaio‐Pinto, V., Janssen, J., Chirico, N., Serra, M., Alves, P. M., Doevendans, P. A., Voets, I. K., Sluijter, J. P. G., Laake, L. W. V., & van Mil, A. (2021) · Advanced Materials · doi:10.1002/adma.202008517 · Cited by 22
Electrowetting-assisted direct ink writing for low-viscosity liquids
Jiang, Y., Wang, X., Plog, J., Yarin, A. L., & Pan, Y. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.07.028 · Cited by 22
Trikalitis, V. D., Kroese, N. J. J., Kaya, M., Cofiño‐Fabrés, C., ten Den, S. A., Khalil, I. S. M., Misra, S., Koopman, H. F. J. M., Passier, R. C., Schwach, V., et al. (2022) · Biofabrication · doi:10.1088/1758-5090/aca124 · Cited by 21
Merotto, E., Pavan, P. G., & Piccoli, M. (2023) · Biomedicines · doi:10.3390/biomedicines11061742 · Cited by 21
Lai, G., & Meagher, L. (2024) · Biofabrication · doi:10.1088/1758-5090/ad39a8 · Cited by 21
Why bioprinting in regenerative medicine should adopt a rational technology readiness assessment
O’Connell, C. D., Dalton, P. D., & Hutmacher, D. W. (2024) · Trends in biotechnology · doi:10.1016/j.tibtech.2024.03.006 · Cited by 21
Shi, W., Zheng, J., Zhang, J., Dong, X., Li, Z., Xiao, Y., Li, Q., Huang, X., & Du, Y. (2024) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-024-00649-x · Cited by 21
Lu, J., Shi, X., Zhou, Z., Lu, N., Chu, G., Jin, H., Zhu, L., & Chen, A. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202402415 · Cited by 21
Erkoc, P., Odeh, Y. N., Alrifai, N., Zırhlı, O., Akdogan, N. G., Yildiz, B., Misirlioglu, I. B., & Akdoğan, O. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49043 · Cited by 21
Yong, U., Lee, S., Jung, S., & Jang, J. (2020) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/abb211 · Cited by 21
Bioprinting: A promising approach for tissue regeneration
França, F. S., dos Santos, M. G., Prestes, J. P., Alcantara, B. J., Borges, M. F., & Pranke, P. H. L. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00130 · Cited by 21
Strategies of Prevascularization in Tissue Engineering and Regeneration of Craniofacial Tissues
Xu, X., Liao, L., & Tian, W. (2021) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2021.0004 · Cited by 21
Basara, G., Bahçecioğlu, G., Ozcebe, S. G., Ellis, B. W., Ronan, G., & Zorlutuna, P. (2022) · Biophysics Reviews · doi:10.1063/5.0093399 · Cited by 21
A framework for digital twin integration in biofabrication and a scaffold 3D bioplotting case study
Ahmed, N., Narayanan, L. K., & Shirwaiker, R. A. (2024) · Manufacturing Letters · doi:10.1016/j.mfglet.2024.09.144 · Cited by 20
3D Biofabrication of Microporous Hydrogels for Tissue Engineering
Liu, Z., Wu, J., Luo, Z., Hou, Y., Xuan, L., Changyi, X., Chang, J., Zhang, D., Zheng, G., Guo, J., et al. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202403583 · Cited by 20
Ng, W. L., Yeow, C. H. E., Huang, X., Lee, S., & Yeong, W. Y. (2025) · Interdisciplinary medicine · doi:10.1002/inmd.20250058 · Cited by 20
Biologics and cardiac disease: challenges and opportunities
Ciucci, G., Colliva, A., Vuerich, R., Pompilio, G., & Zacchigna, S. (2022) · Trends in Pharmacological Sciences · doi:10.1016/j.tips.2022.06.001 · Cited by 20
Research Progress of Three-Dimensional Bioprinting Artificial Cardiac Tissue
Mao, X., & Wang, Z. (2022) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-022-00495-9 · Cited by 20
An overview of the advances in the 3D printing technology
Mateti, T., Jain, S., Shruthi, L. A., Laha, A., & Thakur, G. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99861-1.00002-3 · Cited by 20
Ye, C., Yang, C., Zhang, H., Gao, R., Liao, Y., Zhang, Y., Jie, L., Zhang, Y., Cheng, T., Wang, Y., et al. (2024) · Cell stem cell · doi:10.1016/j.stem.2024.01.008 · Cited by 20
Application of biomaterials in cardiac tissue engineering: Current status and prospects
Zhang, D., He, R., Qu, Y., He, C., & Chu, B. (2024) · MedComm – Biomaterials and Applications · doi:10.1002/mba2.103 · Cited by 20
Lu, L., Fuji, K., Guyomar, T., Lieb, M., André, M., Tanida, S., Nonomura, M., Hiraiwa, T., Alcheikh, Y., Yennek, S., et al. (2025) · Nature Communications · doi:10.1038/s41467-025-60780-8 · Cited by 20
3D printing of multi-functional artificial conduits against acute thrombosis and clinical infection
Wang, H., Mao, Q.-Y., Guo, F., Liu, C., Yang, M.-Z., Hao, M.-F., Meng, Z.-F., Li, S., Zhang, Y., & Wang, J. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109497 · Cited by 20
Storable Cell-Laden Alginate Based Bioinks for 3D Biofabrication
Kostenko, A., Connon, C. J., & Swioklo, S. (2022) · Bioengineering · doi:10.3390/bioengineering10010023 · Cited by 20
Bioprinting of Cardiac Tissue in Space: Where Are We?
Tabury, K., Rehnberg, E., Baselet, B., Baatout, S., & Moroni, L. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202203338 · Cited by 20
Designing Biomaterial Platforms for Cardiac Tissue and Disease Modeling
House, A. A., Atalla, I., Lee, E. J., & Güvendiren, M. (2020) · Advanced NanoBiomed Research · doi:10.1002/anbr.202000022 · Cited by 20
Baruch, E., Cohen, R., Silberman, E., Namestnikov, M., Cabilly, I., Shapira, A., & Dvir, T. (2025) · Advanced Materials · doi:10.1002/adma.202512879 · Cited by 19
Self-citationGranular Hydrogels as Modular Biomaterials: From Structural Design to Biological Responses
Vaziri, A., Maia, R., Zhang, P., Agresti, L., Sjollema, J., Shahbazi, M., & Santos, H. A. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202502462 · Cited by 19
A systematic review and unified framework for design for additive manufacturing (DfAM)
Reinke, G., & Santos, A. C. D. (2026) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-026-17632-6 · Cited by 19
3D Bioprinting for Tumor Metastasis Research
Lin, M., Tang, M., Duan, W., Xia, S., Liu, W., & Wang, Q. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c00239 · Cited by 19
Chen, Z., Shen, J., Wei, M., Yan, W., Yan, Q., Li, Z., Chen, Y., Zhang, F., Du, L., Yuan, B., et al. (2023) · Bio-Design and Manufacturing · doi:10.1007/s42242-023-00238-2 · Cited by 19
Printable Poly(3,4-ethylenedioxythiophene)-Based Conductive Patches for Cardiac Tissue Remodeling
Luque, G. C., Picchio, M. L., Daou, B., Lasa-Fernández, H., Criado‐Gonzalez, M., Querejeta, R., Rama, D. F., Prato, M., Mecerreyes, D., Ruíz-Cabello, J., et al. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c03784 · Cited by 19
Li, F., Li, X., Dai, S., Yang, Z., Bao, Z., Wang, S., Zhang, Z., Midgley, A. C., Fan, M., Zhu, M. F., et al. (2024) · ACS Nano · doi:10.1021/acsnano.4c05380 · Cited by 19
Wu, Y., Wang, Y., Xiao, M., Zhang, G., Zhang, F., Tang, M., Lei, W., Jiang, Z., Li, X., Zhang, H., et al. (2025) · Advanced Science · doi:10.1002/advs.202409871 · Cited by 19
Cakal, S. D., Radeke, C., Alcala, J. F., Ellman, D. G., Butdayev, S., Andersen, D. C., Calløe, K., & Lind, J. U. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac6b71 · Cited by 19
Bioink derived from human placenta supporting angiogenesis
Duan, Y., Huang, W., Zhan, B., Li, Y., Xu, X., Li, K., Li, X., Liu, X., Ding, S., Wang, S., et al. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac7b5b · Cited by 19
Zhou, K., Feng, M., Mao, H., & Gu, Z. (2022) · Biomaterials Science · doi:10.1039/d2bm00632d · Cited by 19
Mechanosensation mediates volume adaptation of cardiac cells and spheroids in 3D
Chin, I. L., Amos, S. E., Jeong, J. H., Hool, L. C., Hwang, Y., & Choi, Y. S. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100391 · Cited by 19
Spitz, S., Ko, E. C., Ertl, P., & Kamm, R. D. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24032171 · Cited by 19
Stereolithography Bioprinting with a Dynamic Support Bath
Li, Y., Mao, Q., Xu, K., Yang, H., Huang, Y. H., & Yin, J. (2022) · Additive manufacturing · doi:10.1016/j.addma.2023.103533 · Cited by 19
Bioprinting extracellular vesicles as a ‘cell-free' regenerative medicine approach
Jiao, K., Liu, C., Basu, S., Raveendran, N. T., Nakano, T., Ivanovski, S., & Han, P. (2023) · Extracellular Vesicles and Circulating Nucleic Acids · doi:10.20517/evcna.2023.19 · Cited by 19
Ukpai, G., & Rubinsky, B. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00077 · Cited by 19
3D Bioprinting and Its Application to Military Medicine
Betz, J. F., Ho, V. B., & Gaston, J. D. (2020) · Military Medicine · doi:10.1093/milmed/usaa121 · Cited by 19
3D Composite Bioprinting for Fabrication of Artificial Biological Tissues
Zhang, Y., Wang, B., Hu, J., Yin, T., Yue, T., Liu, N., & Liu, Y. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v7i1.299 · Cited by 19
Bridging the Gap in Ashby’s Map for Soft Material Properties for Tissue Engineering
Lou, L., Paolino, L., & Agarwal, A. K. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c04331 · Cited by 18
Volumetric bioprinting strategies for creating large-scale tissues and organs
Kim, D. S., Kang, D., Kim, D., & Jang, J. (2023) · MRS Bulletin · doi:10.1557/s43577-023-00541-4 · Cited by 18
Abubakar, M., Masood, M. F., Javed, I., Adil, H., Faraz, M. A., Bhat, R. R., Fatima, M., Abdelkhalek, A., Buccilli, B., Raza, S., et al. (2023) · Cureus · doi:10.7759/cureus.41533 · Cited by 18
Temperature-Controlled 3D Cryoprinting Inks Made of Mixtures of Alginate and Agar
Lou, L., & Rubinsky, B. (2023) · Gels · doi:10.3390/gels9090689 · Cited by 18
Comperat, L., Chagot, L., Massot, S., Stachowicz, M., Dusserre, N., Medina, C. F., Désigaux, T., Dupuy, J., Fricain, J., & Oliveira, H. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202303370 · Cited by 18
Advancement in Cancer Vasculogenesis Modeling through 3D Bioprinting Technology
Shukla, A. K., Yoon, S., Oh, S., Lee, D., Ahn, M., & Kim, B. S. (2024) · Biomimetics · doi:10.3390/biomimetics9050306 · Cited by 18
Extrusion-Based Bioprinting in a Cost-Effective Bioprinter
Dharmaraj, J. J. J., Navasingh, R. J. H., Królczyk, G., & Velu, P. S. (2024) · Machines · doi:10.3390/machines12080518 · Cited by 18
Volume adaptation of neonatal cardiomyocyte spheroids in 3D stiffness gradient GelMA
Chin, I. L., Amos, S. E., Jeong, J. H., Hool, L. C., Hwang, Y., & Choi, Y. S. (2022) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37456 · Cited by 18
Biomaterials of human source for 3D printing strategies
Maia, J. R., Sobreiro‐Almeida, R., Cleymand, F., & Mano, J. F. (2022) · Journal of Physics Materials · doi:10.1088/2515-7639/acada1 · Cited by 18
Biological Scaffolds for Congenital Heart Disease
Harris, A. G., Salih, T., Ghorbel, M. T., Caputo, M., Biglino, G., & Carrabba, M. (2023) · Bioengineering · doi:10.3390/bioengineering10010057 · Cited by 18
Fabricating Robust Constructs with Internal Phase Nanostructures via Liquid‐in‐Liquid 3D Printing
Honaryar, H., LaNasa, J. A., Lloyd, E. C., Hickey, R. J., & Niroobakhsh, Z. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202100445 · Cited by 18
3D biofabricated in vitro models as new approach methodologies for animal alternatives
Hua, W., & Gaharwar, A. K. (2026) · npj Biomedical Innovations. · doi:10.1038/s44385-026-00073-x · Cited by 17
Concise review: Harnessing iPSC-derived cells for ischemic heart disease treatment
Duan, B. (2020) · Journal of Translational Internal Medicine · doi:10.2478/jtim-2020-0004 · Cited by 17
Microfluidic Techniques for Next‐Generation Organoid Systems
Gong, J., Li, M., Kang, J., Yin, Z., Cha, Z., Yang, J., & Xu, H. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202200846 · Cited by 17
In‐Foam Bioprinting: An Embedded Bioprinting Technique with Self‐Removable Support Bath
Madadian, E., Ravanbakhsh, H., Touani, F. K., Rahimnejad, M., Lerouge, S., & Ahmadi, A. (2024) · Small Science · doi:10.1002/smsc.202300280 · Cited by 17
Injectable Hydrogels: A Paradigm Tailored with Design, Characterization, and Multifaceted Approaches
Singhal, R., Sarangi, M. K., & Rath, G. (2024) · Macromolecular Bioscience · doi:10.1002/mabi.202400049 · Cited by 17
Big data and new information technology: what cardiologists need to know
Baladrón, C., de Diego, J. J. G., & Amat-Santos, I. J. (2020) · Revista Española de Cardiología (English Edition) · doi:10.1016/j.rec.2020.06.036 · Cited by 17
Mechanics of hydrogel-based bioprinting: From 3D to 4D
Yang, Q., Lv, X., Gao, B., Ji, Y., & Xu, F. (2021) · Advances in applied mechanics · doi:10.1016/bs.aams.2021.03.001 · Cited by 17
Trends in Bio-Derived Biomaterials in Tissue Engineering
Chouhan, D., Kaushik, S., & Arora, D. (2021) · Springer eBooks · doi:10.1007/978-981-16-0002-9_6 · Cited by 9
Cardiac Tissue Engineering for the Treatment of Myocardial Infarction
Yu, D., Wang, X., & Ye, L. (2021) · Journal of Cardiovascular Development and Disease · doi:10.3390/jcdd8110153 · Cited by 17
Facilitating Safe FFF 3D Printing: A Prototype Material Case Study
Karayannis, P., Saliakas, S., Kokkinopoulos, I., Damilos, S., Koumoulos, E. P., Gkartzou, E., Goméz, J., & Charitidis, C. A. (2022) · Sustainability · doi:10.3390/su14053046 · Cited by 17
Electrostatically-assisted direct ink writing with superior speed and resolution
Plog, J., Wang, X., Pan, Y., & Yarin, A. L. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.02.038 · Cited by 17
3D printing in the planning and teaching of endovascular procedures
Stana, J., Grab, M., Kargl, R., & Tsilimparis, N. (2022) · Die Radiologie · doi:10.1007/s00117-022-01047-x · Cited by 17
Zeng, J., Xie, Z., Dekishima, Y., Kuwagaki, S., Sakai, N., & Matsusaki, M. (2023) · Macromolecular Rapid Communications · doi:10.1002/marc.202300025 · Cited by 17
Channeled ECM-Based Nanofibrous Hydrogel for Engineering Vascularized Cardiac Tissues
Arvatz, S., Wertheim, L., Fleischer, S., Shapira, A., & Dvir, T. (2019) · Nanomaterials · doi:10.3390/nano9050689 · Cited by 17
Self-citation3D bioprinted and integrated platforms for cardiac tissue modeling and drug testing
Yong, U., Kang, B., & Jang, J. (2021) · Essays in Biochemistry · doi:10.1042/ebc20200106 · Cited by 17
Girija, M., & Kumar, T. S. (2024) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2024.0123 · Cited by 16
Three-Dimensional Bioprinting for Intervertebral Disc Regeneration
Tanvir, M. A. H., Khaleque, M. A., Lee, J., Park, J., Kim, G.-H., Lee, H.-H., & Kim, Y. (2025) · Journal of Functional Biomaterials · doi:10.3390/jfb16030105 · Cited by 16
Marino, S., Al-Hijailan, R. S., Alonaizan, R., Gabetti, S., Massai, D., & Pesce, M. (2025) · Gels · doi:10.3390/gels11080593 · Cited by 16
Current state and future of 3D bioprinted models for cardio-vascular research and drug development
Polonchuk, L., & Gentile, C. (2021) · ADMET & DMPK · doi:10.5599/admet.951 · Cited by 16
3D Bio-printing For Skin Tissue Regeneration: Hopes and Hurdles
Aavani, F., Biazar, E., Kheilnezhad, B., & Amjad, F. (2022) · Current Stem Cell Research & Therapy · doi:10.2174/1574888x17666220204144544 · Cited by 16
Classification of the emerging freeform three-dimensional printing techniques
Colly, A., Marquette, C. A., Frances, J.-M., & Courtial, E. (2022) · MRS Bulletin · doi:10.1557/s43577-022-00348-9 · Cited by 16
Zeng, J., Kasahara, N., Xie, Z., Louis, F., Kang, D., Dekishima, Y., Kuwagaki, S., Sakai, N., & Matsusaki, M. (2023) · Biofabrication · doi:10.1088/1758-5090/acce09 · Cited by 16
Rapid Magnetically Directed Assembly of Pre‐Patterned Capillary‐Scale Microvessels
Jewett, M. E., Hiraki, H. L., Wojasiński, M., Zhang, Z., Xi, S., Bluem, A. S., Prabhu, E. S., Wang, W. Y., Pena‐Francesch, A., & Baker, B. M. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202203715 · Cited by 16
Metadata
- Authors
- Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T.
- Affiliations
- Tel Aviv University (IL)
- Corresponding author
- Dvir, Tal
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2019-04-15
- Volume
- 6
- Issue
- 11
- Pages
- 1900344-1900344
- ISSN
- 2198-3844 (ISSN-L)
- PMC
- PMC6548966
- OpenAlex
- W2937820813
- Cited by
- 1,042
- References
- 36
- Citations by year
- 2026: 59 · 2025: 106 · 2024: 126 · 2023: 187 · 2022: 157 · 2021: 212 · 2020: 142 · 2019: 51
- FWCI
- 49.47
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Advanced Science (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- European Research Council (637943)
- Israel Science Foundation (700/13)
- Ministry of Science, Technology and Space (3‐12587)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, cardiac tissue engineering, personalized medicine, pluripotent stem cells, cardiomyocytes, endothelial cells, extracellular matrix hydrogel, bioinks, cardiac cell transplantation, drug screening, organ printing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.