3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Open accessThe DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
Generation of thick vascularized tissues that fully match the patient still remains an unmet challenge in cardiac tissue engineering. Here, a simple approach to 3D‐print thick, vascularized, and perfusable cardiac patches that completely match the immunological, cellular, biochemical, and anatomical properties of the patient is reported. To this end, a biopsy of an omental tissue is taken from patients. While the cells are reprogrammed to become pluripotent stem cells, and differentiated to cardiomyocytes and endothelial cells, the extracellular matrix is processed into a personalized hydrogel. Following, the two cell types are separately combined with hydrogels to form bioinks for the parenchymal cardiac tissue and blood vessels. The ability to print functional vascularized patches according to the patient's anatomy is demonstrated. Blood vessel architecture is further improved by mathematical modeling of oxygen transfer. The structure and function of the patches are studied in vitro, and cardiac cell morphology is assessed after transplantation, revealing elongated cardiomyocytes with massive actinin striation. Finally, as a proof of concept, cellularized human hearts with a natural architecture are printed. These results demonstrate the potential of the approach for engineering personalized tissues and organs, or for drug screening in an appropriate anatomical structure and patient‐specific biochemical microenvironment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The fact that macroscale contractile function has not yet been achieved in a 3D printed, perfusable, chambered heart model reflects the challenges associated with handling mature cardiac muscle cells.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Yet, inclusion of contiguous, living muscle to support pump function has not been achieved.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Multiple studies have demonstrated the capacity to print entire heart organ models using biological materials, but the resulting constructs have either lacked cells8, 9 or evidence of electromechanical function18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heart Disease and Stroke Statistics—2017 Update: A Report From the American Heart Association
Benjamin, E. J., Blaha, M. J., Chiuve, S. E., Cushman, M., Das, S. R., Deo, R., de Ferranti, S. D., Floyd, J., Fornage, M., Gillespie, C., et al. (2017) · Circulation · doi:10.1161/cir.0000000000000485 · Cited by 12,591
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Lian, X., Hsiao, C., Wilson, G., Zhu, K., Hazeltine, L. B., Azarin, S. M., Raval, K. K., Zhang, J., Kamp, T. J., & Palecek, S. P. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1200250109 · Cited by 1,717
Scaffolding in tissue engineering: general approaches and tissue-specific considerations
Chan, B. P., & Leong, K. W. (2008) · European Spine Journal · doi:10.1007/s00586-008-0745-3 · Cited by 1,708
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Nanotechnological strategies for engineering complex tissues
Dvir, T., Timko, B. P., Kohane, D. S., & Langer, R. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.246 · Cited by 1,367
Self-citation
Research works printed but not linked: 1
- Members W. G., 2017, Circulation, 135, e146
Cited by
Items 201–300 of 1,000
Hinman, S. S., Wang, Y., Kim, R., & Allbritton, N. L. (2020) · Nature Protocols · doi:10.1038/s41596-020-00419-8 · Cited by 70
Embedded 3D Printing of Multimaterial Polymer Lattices via Graph‐Based Print Path Planning
Weeks, R. D., Truby, R. L., Uzel, S. G. M., & Lewis, J. A. (2022) · Advanced Materials · doi:10.1002/adma.202206958 · Cited by 70
Engineering multifunctional adhesive hydrogel patches for biomedical applications
Chakraborty, A., Alexander, S., Luo, W., Al‐Salam, N., Oirschot, M. V., Ranganath, S. H., Chakrabarti, S., & Paul, A. (2023) · Interdisciplinary medicine · doi:10.1002/inmd.20230008 · Cited by 71
Using bioprinting and spheroid culture to create a skin model with sweat glands and hair follicles
Zhang, Y., Enhejirigala, Yao, B., Li, Z., Song, W., Li, J., Zhu, D., Wang, Y., Duan, X., Yuan, X., et al. (2021) · Burns & Trauma · doi:10.1093/burnst/tkab013 · Cited by 69
Omar, R., Saliba, W., Khatib, M., Zheng, Y., Pieters, C., Oved, H., Silberman, E., Zohar, O., Hu, Z., Kloper, V., et al. (2024) · ACS Sensors · doi:10.1021/acssensors.3c01755 · Cited by 69
Self-citationEwoldt, J. K., DePalma, S. J., Jewett, M. E., Karakan, M. Ç., Lin, Y.-M., Hashemian, P. M., Gao, X., Lou, L., McLellan, M. A., Tabares, J., et al. (2024) · Nature Methods · doi:10.1038/s41592-024-02480-7 · Cited by 70
Biomechanical factors in three-dimensional tissue bioprinting
Ning, L., Gil, C. J., Hwang, B., Theus, A. S., Perez, L., Tomov, M. L., Bauser‐Heaton, H. D., & Serpooshan, V. (2020) · Applied Physics Reviews · doi:10.1063/5.0023206 · Cited by 69
Su, H., Li, Q., Li, D., Li, H., Feng, Q., Cao, X., & Dong, H. (2022) · Materials Horizons · doi:10.1039/d2mh00314g · Cited by 68
Developments of additive manufacturing and 5D printing in tissue engineering
Lai, J., & Wang, M. (2023) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-023-01193-5 · Cited by 68
Progress in Organ Bioprinting for Regenerative Medicine
Wang, X. S., Zhang, D., Singh, Y. P., Yeo, M., Deng, G., Lai, J., Chen, F., Ozbolat, I. T., & Yu, Y. (2024) · Engineering · doi:10.1016/j.eng.2024.04.023 · Cited by 68
Application Status of Sacrificial Biomaterials in 3D Bioprinting
Liu, S., Wang, T., Li, S., & Wang, X. (2022) · Polymers · doi:10.3390/polym14112182 · Cited by 67
Rationally Designed Anisotropic and Auxetic Hydrogel Patches for Adaptation to Dynamic Organs
Chansoria, P., Blackwell, J., Etter, E. L., Bonacquisti, E. E., Jasiewicz, N. E., Neal, T. A., Kamal, S. A., Hoque, J., Varghese, S., Egan, T. M., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202207590 · Cited by 67
Whole Organ Engineering: Approaches, Challenges, and Future Directions
Sohn, S., Buskirk, M. V., Buckenmeyer, M. J., Londoño, R., & Faulk, D. M. (2020) · Applied Sciences · doi:10.3390/app10124277 · Cited by 67
Regenerative Engineering: A Review of Recent Advances and Future Directions
Esdaille, C. J., Washington, K. S., & Laurencin, C. T. (2021) · Regenerative Medicine · doi:10.2217/rme-2021-0016 · Cited by 66
Kahn-Krell, A. M., Pretorius, D., Guragain, B., Lou, X., Wei, Y., Zhang, J., Qiao, A., Nakada, Y., Kamp, T. J., Ye, L., et al. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.908848 · Cited by 66
Current challenges in three-dimensional bioprinting heart tissues for cardiac surgery
Roche, C. D., Brereton, R. J. L., Ashton, A. W., Jackson, C., & Gentile, C. (2020) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezaa093 · Cited by 65
Bioprinting Technologies and Bioinks for Vascular Model Establishment
Kong, Z., & Wang, X. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24010891 · Cited by 65
Electro-metabolic coupling in multi-chambered vascularized human cardiac organoids
Ghosheh, M., Ehrlich, A., Ioannidis, K., Ayyash, M., Goldfracht, I., Cohen, M., Fischer, A., Mintz, Y., Gepstein, L., & Nahmias, Y. (2023) · Nature Biomedical Engineering · doi:10.1038/s41551-023-01071-9 · Cited by 65
Biosynthetic, biomimetic, and self-assembled vascularized Organ-on-a-Chip systems
Fritschen, A., & Blaeser, A. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120556 · Cited by 65
Latest Advances in 3D Bioprinting of Cardiac Tissues
Jafari, A., Ajji, Z., Mousavi, A., Naghieh, S., Bencherif, S., & Savoji, H. (2022) · Advanced Materials & Technologies · doi:10.1002/admt.202101636 · Cited by 46
Accelerating cardiovascular research: recent advances in translational 2D and 3D heart models
Mohr, E., Thum, T., & Bär, C. (2022) · European Journal of Heart Failure · doi:10.1002/ejhf.2631 · Cited by 63
Miramini, S., Fegan, K. L., Green, N. C., Espino, D. M., Zhang, L., & Thomas-Seale, L. E. J. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103544 · Cited by 62
Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions
Romanazzo, S., Molley, T. G., Nemec, S. R., Lin, K., Sheikh, R. H., Gooding, J. J., Wan, B., Li, Q., Kilian, K. A., & Roohani, I. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008216 · Cited by 62
Park, Y., Chung, T. S., Lee, G., & Rogers, J. A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00639 · Cited by 62
Schätzlein, E., & Blaeser, A. (2022) · Communications Biology · doi:10.1038/s42003-022-03593-5 · Cited by 62
Ultra-fast programmable human-machine interface enabled by 3D printed degradable conductive hydrogel
Zhang, Y., Chen, L., Xie, M., Zhan, Z., Yang, D., Cheng, P., Duan, H., Ge, Q., & Wang, Z. (2022) · Materials Today Physics · doi:10.1016/j.mtphys.2022.100794 · Cited by 62
Șufaru, I.-G., Macovei, G., Stoleriu, S., Mârțu, M.-A., Luchian, I. A., Kappenberg-Niţescu, D.-C., & Solomon, S. M. (2022) · Membranes · doi:10.3390/membranes12090902 · Cited by 62
Ganguly, S., Wulff, D., Phan, C., Jones, L., & Tang, X. S. (2024) · ACS Applied Bio Materials · doi:10.1021/acsabm.4c00901 · Cited by 62
Kajtez, J., Wesseler, M. F., Birtele, M., Khorasgani, F. R., Ottosson, D. R., Heiskanen, A. R., Kamperman, T., Leijten, J., Martínez-Serrano, A., Larsen, N. B., et al. (2022) · Advanced Science · doi:10.1002/advs.202201392 · Cited by 62
Emerging trends in the methodology of environmental toxicology: 3D cell culture and its applications
Wang, H., Xu, T., & Yin, D. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.159501 · Cited by 61
Multiscale Hybrid Fabrication: Volumetric Printing Meets Two‐Photon Ablation
Rizzo, R., Rütsche, D., Liu, H., Chansoria, P., Wang, A., Hasenauer, A., & Zenobi‐Wong, M. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201871 · Cited by 61
3D bioprinting and its potential impact on cardiac failure treatment: An industry perspective
Birla, R. K., & Williams, S. K. (2020) · APL Bioengineering · doi:10.1063/1.5128371 · Cited by 61
Acoustic Anomaly Detection in Additive Manufacturing with Long Short-Term Memory Neural Networks
Becker, P., Roth, C., Roennau, A., & Dillmann, R. (2020) · IEEE International Conference on Industrial Engineering and Applications (ICIEA) · doi:10.1109/iciea49774.2020.9102002 · Cited by 61
Microvascular Tissue Engineering—A Review
Vajda, J., Milojević, M., Maver, U., & Vihar, B. (2021) · Biomedicines · doi:10.3390/biomedicines9060589 · Cited by 60
Aqueous Two‐Phase Enabled Low Viscosity 3D (LoV3D) Bioprinting of Living Matter
Becker, M., Gurian, M., Schot, M., & Leijten, J. (2022) · Advanced Science · doi:10.1002/advs.202204609 · Cited by 60
Advancing Organoid Engineering for Tissue Regeneration and Biofunctional Reconstruction
Jin, H., Xue, Z., Liu, J., Ma, B., Yang, J., & Lei, L. (2024) · Biomaterials Research · doi:10.34133/bmr.0016 · Cited by 60
Application of 3D Bioprinting Technologies to the Management and Treatment of Diabetic Foot Ulcers
Tan, C. T., Liang, K., Ngo, Z. H., Dube, C. T., & Lim, C. Y. (2020) · Biomedicines · doi:10.3390/biomedicines8100441 · Cited by 60
Recent progress of 3D printed vascularized tissues and organs
Zheng, K., Chai, M., Luo, B., Cheng, K., Wang, Z., Li, N., & Shi, X. (2024) · Smart Materials in Medicine · doi:10.1016/j.smaim.2024.01.001 · Cited by 60
Bioprinting Scaffolds for Vascular Tissues and Tissue Vascularization
Hauser, P. V., Chang, H.-M., Nishikawa, M., Kimura, H., Yanagawa, N., & Hamon, M. (2021) · Bioengineering · doi:10.3390/bioengineering8110178 · Cited by 58
Latent image volumetric additive manufacturing
Rackson, C. M., Toombs, J. T., de Beer, M. P., Cook, C. C., Shusteff, M., Taylor, H., & McLeod, R. R. (2022) · Optics Letters · doi:10.1364/ol.449220 · Cited by 58
You, Y., Niu, Y., Sun, F., Huang, S., Ding, P., Wang, X., Zhang, X., & Zhang, J. (2022) · Frontiers in Surgery · doi:10.3389/fsurg.2022.1030081 · Cited by 58
Lu, B., Ye, M., Xia, J., Zhang, Z., Xiong, Z., & Zhang, T. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300607 · Cited by 58
Simultaneous multi-material embedded printing for 3D heterogeneous structures
Gao, Z., Yin, J. L., Liu, P., Li, Q., Zhang, R., Yang, H., & Zhou, H. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acd285 · Cited by 58
Biomaterials-Based Antioxidant Strategies for the Treatment of Oxidative Stress Diseases
Pérez-Araluce, M., Jüngst, T., Sanmartín, C., Prósper, F., Plano, D., & Mazo, M. M. (2024) · Biomimetics · doi:10.3390/biomimetics9010023 · Cited by 58
Two-photon polymerization-based 3D micro-scaffolds toward biomedical devices
Wang, W., Chen, Z., Lin, B., Liu, M., Zhang, Y., Liu, S., Li, Y., & Zhao, Q. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.152469 · Cited by 58
A Covalently Crosslinked Ink for Multimaterials Drop‐on‐Demand 3D Bioprinting of 3D Cell Cultures
Utama, R. H., Tan, V. T. G., Tjandra, K. C., Sexton, A., Nguyen, D. H. T., O’Mahony, A. P., Du, E. Y., Tian, P., Ribeiro, J. C. C., Kavallaris, M., et al. (2021) · Macromolecular Bioscience · doi:10.1002/mabi.202100125 · Cited by 59
Kim, M. H., Banerjee, D., Celik, N., & Ozbolat, I. T. (2022) · Biofabrication · doi:10.1088/1758-5090/ac4dd8 · Cited by 57
Recent Developments in 3D Bio-Printing and Its Biomedical Applications
Assad, H., Assad, A., & Kumar, A. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15010255 · Cited by 57
3D Bioprinting tissue analogs: Current development and translational implications
Liu, S., Cheng, L., Liu, Y., Zhang, H., Song, Y., Park, J.-H., Dashnyam, K., Lee, J., Khalak, F. A.-H., Riester, O., et al. (2023) · Journal of Tissue Engineering · doi:10.1177/20417314231187113 · Cited by 57
Autonomous Control of Extrusion Bioprinting Using Convolutional Neural Networks
Kelly, D., Sergis, V., Blanco, L. V. I., Mason, K., & Daly, A. C. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202424553 · Cited by 57
The Current Dilemma and Breakthrough of Stem Cell Therapy in Ischemic Heart Disease
Liu, C., Han, D., Liang, P., Li, Y., & Cao, F. (2021) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2021.636136 · Cited by 57
An insight on advances and applications of 3d bioprinting: A review
Bejoy, A. M., Makkithaya, K. N., Hunakunti, B. B., Hegde, A., Krishnamurthy, K., Sarkar, A., Lobo, C. F., Keshav, D. V. S., Gopal, D., Dhivya Dharshini, S., et al. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00176 · Cited by 57
The marriage of Xenes and hydrogels: Fundamentals, applications, and outlook
Kang, Y., Zhang, H., Chen, L., Dong, J., Yao, B., Xue, Y., Qin, D., Yaremenko, A. V., Chuang, L. I. U., Feng, C., et al. (2022) · The Innovation · doi:10.1016/j.xinn.2022.100327 · Cited by 57
Advances in cardiac tissue engineering and heart‐on‐a‐chip
Kieda, J., Shakeri, A., Landau, S., Wang, E. Y., Zhao, Y., Lai, B. F., Okhovatian, S., Wang, Y., Jiang, R., & Radisic, M. (2023) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37633 · Cited by 56
Shapira, A., Noor, N., Oved, H., & Dvir, T. (2020) · Biomedical Materials · doi:10.1088/1748-605x/ab809f · Cited by 56
Self-citationA sequential 3D bioprinting and orthogonal bioconjugation approach for precision tissue engineering
Yu, C., Miller, K. L., Schimelman, J. B., Wang, P., Zhu, W. Z., Ma, X., Tang, M., You, S., Lakshmipathy, D. R., He, F., et al. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120294 · Cited by 56
Towards engineering heart tissues from bioprinted cardiac spheroids
Polonchuk, L., Surija, L., Lee, M. H., Sharma, P., Ming, C. L. C., Richter, F., Ben-Sefer, E., Rad, M. A., Sarmast, H. M. S., Shamery, W. A., et al. (2021) · Biofabrication · doi:10.1088/1758-5090/ac14ca · Cited by 56
3D bioprinting of cardiac tissue: current challenges and perspectives
Kato, B., Wisser, G., Agrawal, D. K., Wood, T. J., & Thankam, F. G. (2021) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-021-06520-y · Cited by 55
Rapid Prototyping Technologies: 3D Printing Applied in Medicine
Oleksy, M., Dynarowicz, K., & Aebisher, D. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15082169 · Cited by 55
He, L., & Chen, D. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202001175 · Cited by 55
Recent advancements in cardiovascular bioprinting and bioprinted cardiac constructs
Budharaju, H., Subramanian, A., & Sethuraman, S. (2021) · Biomaterials Science · doi:10.1039/d0bm01428a · Cited by 55
What can biofabrication do for space and what can space do for biofabrication?
Moroni, L., Tabury, K., Stenuit, H., Grimm, D. G., Baatout, S., & Mironov, V. A. (2021) · Trends in biotechnology · doi:10.1016/j.tibtech.2021.08.008 · Cited by 55
Işık, M., Karakaya, E., Arslan, T. S., Atila, D., Erdoğan, Y. K., Arslan, Y. E., Eskizengin, H., Eylem, C. C., Nemutlu, E., Ercan, B., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202203044 · Cited by 54
Cavero, I., Guillon, J., & Holzgrefe, H. H. (2019) · Expert Opinion on Drug Safety · doi:10.1080/14740338.2019.1634689 · Cited by 53
Laser‐Based Printing: From Liquids to Microstructures
Armon, N., Greenberg, E., Edri, E., Nagler‐Avramovitz, O., Elias, Y., & Shpaisman, H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008547 · Cited by 53
Shaping collagen for engineering hard tissues: Towards a printomics approach
Maher, M., Castilho, M. D., Yue, Z., Glattauer, V., Hughes, T. C., Ramshaw, J. A. M., & Wallace, G. G. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.06.035 · Cited by 53
Suppression of Filament Defects in Embedded 3D Printing
Friedrich, L. M., Gunther, R. T., & Seppala, J. E. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c08047 · Cited by 53
Tajabadi, M., Orimi, H. G., Ramzgouyan, M. R., Nemati, A., Deravi, N., Beheshtizadeh, N., & Azami, M. (2021) · Biomedicine & Pharmacotherapy · doi:10.1016/j.biopha.2021.112584 · Cited by 52
Print‐and‐Grow within a Novel Support Material for 3D Bioprinting and Post‐Printing Tissue Growth
Machour, M., Hen, N., Goldfracht, I., Safina, D., Davidovich‐Pinhas, M., Bianco‐Peled, H., & Levenberg, S. (2022) · Advanced Science · doi:10.1002/advs.202200882 · Cited by 52
Fabrication and Characterization Techniques of In Vitro 3D Tissue Models
Shyam, R., Reddy, L. V. K., & Palaniappan, A. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24031912 · Cited by 52
Microfluidic bioprinting towards a renal in vitro model
Addario, G., Djudjaj, S., Farè, S., Boor, P., Moroni, L., & Mota, C. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00108 · Cited by 52
Bioprinted Vascularized Mature Adipose Tissue with Collagen Microfibers for Soft Tissue Regeneration
Louis, F., Piantino, M., Liu, H., Kang, D., Sowa, Y., Kitano, S., & Matsusaki, M. (2021) · Cyborg and Bionic Systems · doi:10.34133/2021/1412542 · Cited by 52
Moreira, A., Müller, M., Costa, P. F., & Kohl, Y. (2021) · Advanced Biology · doi:10.1002/adbi.202101139 · Cited by 52
3D printing of functional nerve guide conduits
Huang, Y., Wu, W., Liu, H., Chen, Y., Li, B., Gou, Z., Li, X., & Gou, M. (2021) · Burns & Trauma · doi:10.1093/burnst/tkab011 · Cited by 51
Ketabat, F., Maris, T., Duan, X., Yazdanpanah, Z., Kelly, M., Badea, I., & Chen, D. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1161804 · Cited by 51
Multimaterial Hydrogel 3D Printing
Imrie, P., & Jin, J. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300272 · Cited by 51
Layer-By-Layer: The Case for 3D Bioprinting Neurons to Create Patient-Specific Epilepsy Models
Antill‐O'Brien, N., Bourke, J., & O’Connell, C. D. (2019) · Materials · doi:10.3390/ma12193218 · Cited by 51
Speed it up, slow it down…An issue of bicalutamide release from 3D printed tablets
Jamróz, W., Kurek, M., Szafraniec-Szczęsny, J., Czech, A., Gawlak, K., Knapik-Kowalczuk, J., Leszczyński, B., Wróbel, A., Paluch, M., & Jachowicz, R. (2019) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2019.105169 · Cited by 51
3D printing low-stiffness silicone within a curable support matrix
Greenwood, T. E., Hatch, S. E., Colton, M. B., & Thomson, S. L. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101681 · Cited by 51
Setayeshmehr, M., Hafeez, S., van Blitterswijk, C., Moroni, L., Mota, C., & Baker, M. B. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22083901 · Cited by 51
Freeform 3D printing of vascularized tissues: Challenges and strategies
Lee, H., Jang, T., Han, G., Kim, H., & Jung, H. (2021) · Journal of Tissue Engineering · doi:10.1177/20417314211057236 · Cited by 51
A framework for developing sex-specific engineered heart models
Lock, R., Al Asafen, H., Fleischer, S., Tamargo, M., Zhao, Y., Radisic, M., & Vunjak-Novakovic, G. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00381-1 · Cited by 50
3D Printing Soft Matters and Applications: A Review
Zhan, S., Guo, A. X. Y., Cao, S. C., & Liu, N. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23073790 · Cited by 50
Macrophages enhance contractile force in iPSC-derived human engineered cardiac tissue
Lock, R. I., Graney, P. L., Tavakol, D. N., Nash, T. R., Kim, Y., Sanchez, E., Morsink, M. A. J., Ning, D., Chen, C., Fleischer, S., et al. (2024) · Cell Reports · doi:10.1016/j.celrep.2024.114302 · Cited by 50
3D Printing of Bioceramic Multifunctional Scaffolds for Bone Tissue Engineering
Shao, H., Wen, K., Liu, R., Ding, N., Gong, Y., Zhuang, Y., & He, Y. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202509039 · Cited by 50
Sousa, C. F. V., Saraiva, C. A. M., Correia, T. R., Pesqueira, T., Patrício, S. G., Rial-Hermida, M. I., Borges, J., & Mano, J. F. (2021) · Biomolecules · doi:10.3390/biom11060863 · Cited by 50
Academic Insights and Perspectives in 3D Printing: A Bibliometric Review
Bai, W., Fang, H., Wang, Y., Zeng, Q., Hu, G., Bao, G., & Wan, Y. (2021) · Applied Sciences · doi:10.3390/app11188298 · Cited by 50
Tunable and Compartmentalized Multimaterial Bioprinting for Complex Living Tissue Constructs
Hassan, S., Gomez-Reyes, E., Enciso‐Martínez, E., Shi, K., Campos, J. G., Soria, O. Y. P., Ceron, E. L., Lee, M. C., García-Reyes, I. E., Steakelum, J., et al. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c12585 · Cited by 50
Nakicenovic, N., Messner, D., Zimm, C., Clarke, G., Rockström, J., Aguiar, A. P. D., Boza‐Kiss, B., Campagnolo, L., Chabay, I., Collste, D., et al. (2019) · IIASA PURE (International Institute of Applied Systems Analysis) · doi:10.22022/tnt/05-2019.15913 · Cited by 50
Xing, F., Xu, J., Yu, P., Zhou, Y., Zhe, M., Luo, R., Liu, M., Xiang, Z., Duan, X., & Ritz, U. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111885 · Cited by 49
Priorities in Cardio-Oncology Basic and Translational Science
Salloum, F. N., Tocchetti, C. G., Ameri, P., Ardehali, H., Asnani, A. H., de Boer, R. A., Burridge, P. W., Cabrera, J. Á., de Castro, J., Córdoba, R., et al. (2023) · JACC CardioOncology · doi:10.1016/j.jaccao.2023.08.003 · Cited by 49
Could 3D printing be the future for oral soft tissue regeneration?
Nešić, D., Durual, S., Marger, L., Mekki, M., Sailer, I., & Scherrer, S. S. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00100 · Cited by 49
Ning, L., Zhu, N., Smith, A., Rajaram, A., Hou, H., Srinivasan, S., Mohabatpour, F., He, L., Mclnnes, A., Serpooshan, V., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c02297 · Cited by 49
Applications of 3D Bioprinting Technology in Induced Pluripotent Stem Cells-Based Tissue Engineering
Shukla, A. K., Gao, G., & Kim, B. S. (2022) · Micromachines · doi:10.3390/mi13020155 · Cited by 49
Bioprinted vascular tissue: Assessing functions from cellular, tissue to organ levels
Jiang, H., Li, X., Chen, T., Liu, Y., Wang, Q., Wang, Z., & Jia, J. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100846 · Cited by 48
3D Printing in Drug Delivery and Biomedical Applications: A State-of-the-Art Review
Mahmood, M. A. (2021) · Compounds · doi:10.3390/compounds1030009 · Cited by 48
Engineering Tissue Fabrication With Machine Intelligence: Generating a Blueprint for Regeneration
Kim, J., McKee, J. A., Fontenot, J. J., & Jung, J. P. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00443 · Cited by 47
Living materials made by 3D printing cellulose-producing bacteria in granular gels
Binelli, M. R., Rühs, P. A., Pisaturo, G., Leu, S., Trachsel, E., & Studart, A. R. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.213095 · Cited by 47
Soft Hydrogel Shapeability via Supportive Bath Matching in Embedded 3D Printing
Lei, I. M., Zhang, D., Gu, W., Liu, J., Zi, Y., & Huang, Y. Y. S. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300001 · Cited by 47
Self-Healing Concrete: Background, Development, and Market Prospects
(2021) · Biointerface Research in Applied Chemistry · doi:10.33263/briac116.1470914725 · Cited by 46
Metadata
- Authors
- Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T.
- Affiliations
- Tel Aviv University (IL)
- Corresponding author
- Dvir, Tal
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2019-04-15
- Volume
- 6
- Issue
- 11
- Pages
- 1900344-1900344
- ISSN
- 2198-3844 (ISSN-L)
- PMC
- PMC6548966
- OpenAlex
- W2937820813
- Cited by
- 1,042
- References
- 36
- Citations by year
- 2026: 59 · 2025: 106 · 2024: 126 · 2023: 187 · 2022: 157 · 2021: 212 · 2020: 142 · 2019: 51
- FWCI
- 49.47
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Advanced Science (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- European Research Council (637943)
- Israel Science Foundation (700/13)
- Ministry of Science, Technology and Space (3‐12587)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, cardiac tissue engineering, personalized medicine, pluripotent stem cells, cardiomyocytes, endothelial cells, extracellular matrix hydrogel, bioinks, cardiac cell transplantation, drug screening, organ printing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.