3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Open accessThe DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
Generation of thick vascularized tissues that fully match the patient still remains an unmet challenge in cardiac tissue engineering. Here, a simple approach to 3D‐print thick, vascularized, and perfusable cardiac patches that completely match the immunological, cellular, biochemical, and anatomical properties of the patient is reported. To this end, a biopsy of an omental tissue is taken from patients. While the cells are reprogrammed to become pluripotent stem cells, and differentiated to cardiomyocytes and endothelial cells, the extracellular matrix is processed into a personalized hydrogel. Following, the two cell types are separately combined with hydrogels to form bioinks for the parenchymal cardiac tissue and blood vessels. The ability to print functional vascularized patches according to the patient's anatomy is demonstrated. Blood vessel architecture is further improved by mathematical modeling of oxygen transfer. The structure and function of the patches are studied in vitro, and cardiac cell morphology is assessed after transplantation, revealing elongated cardiomyocytes with massive actinin striation. Finally, as a proof of concept, cellularized human hearts with a natural architecture are printed. These results demonstrate the potential of the approach for engineering personalized tissues and organs, or for drug screening in an appropriate anatomical structure and patient‐specific biochemical microenvironment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The fact that macroscale contractile function has not yet been achieved in a 3D printed, perfusable, chambered heart model reflects the challenges associated with handling mature cardiac muscle cells.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Yet, inclusion of contiguous, living muscle to support pump function has not been achieved.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Multiple studies have demonstrated the capacity to print entire heart organ models using biological materials, but the resulting constructs have either lacked cells8, 9 or evidence of electromechanical function18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heart Disease and Stroke Statistics—2017 Update: A Report From the American Heart Association
Benjamin, E. J., Blaha, M. J., Chiuve, S. E., Cushman, M., Das, S. R., Deo, R., de Ferranti, S. D., Floyd, J., Fornage, M., Gillespie, C., et al. (2017) · Circulation · doi:10.1161/cir.0000000000000485 · Cited by 12,591
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Lian, X., Hsiao, C., Wilson, G., Zhu, K., Hazeltine, L. B., Azarin, S. M., Raval, K. K., Zhang, J., Kamp, T. J., & Palecek, S. P. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1200250109 · Cited by 1,717
Scaffolding in tissue engineering: general approaches and tissue-specific considerations
Chan, B. P., & Leong, K. W. (2008) · European Spine Journal · doi:10.1007/s00586-008-0745-3 · Cited by 1,708
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Nanotechnological strategies for engineering complex tissues
Dvir, T., Timko, B. P., Kohane, D. S., & Langer, R. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.246 · Cited by 1,367
Self-citation
Research works printed but not linked: 1
- Members W. G., 2017, Circulation, 135, e146
Cited by
Items 401–500 of 1,000
Zhang, S., Li, G., Man, J., Zhang, S., Li, J., Li, J., & Li, D. (2020) · Micromachines · doi:10.3390/mi11070681 · Cited by 32
Norbornene-functionalized methylcellulose as a thermo- and photo-responsive bioink
Kim, M. H., & Lin, C. (2021) · Biofabrication · doi:10.1088/1758-5090/ac24dc · Cited by 32
Mokrushin, A. S., Simonenko, T. L., Simonenko, N. P., Gorobtsov, P. Y., Bocharova, V. A., Kozodaev, M. G., Markeev, A. M., Lizunova, A. A., Volkov, I. A., Симоненко, Е. П., et al. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.151984 · Cited by 32
Additive manufacturing and advanced functionalities of cardiac patches: A review
Ghofrani, A., Taghavi, L., Khalilivavdareh, B., Shirvan, A. R., & Nouri, A. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111332 · Cited by 32
FRESH Bioprinting of Dynamic Hydrazone-Cross-Linked Synthetic Hydrogels
Mueller, E., Xu, F., & Hoare, T. R. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c01046 · Cited by 32
Plant‐Derived Biomaterials and Their Potential in Cardiac Tissue Repair
Dai, Y., Qiao, K., Li, D., Isingizwe, P., Liu, H., Liu, Y., Lim, K. S., Woodfield, T. B. F., Liu, G., Hu, J., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202202827 · Cited by 32
Engineered Human Organoids for Biomedical Applications
Zhu, Y., Sun, L., Wu, X., Gu, Z., & Zhao, Y. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202310961 · Cited by 32
Feng, L., Liang, S., Zhou, Y., Luo, Y., Chen, R., Huang, Y., Chen, Y., Xu, M., & Yao, R. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01825 · Cited by 32
Xie, Z., Zeng, J., Kang, D., Saito, S., Miyagawa, S., Sawa, Y., & Matsusaki, M. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202301090 · Cited by 31
Zeng, C., Xue, J., Jia, Y., Luo, S., Huang, F., Liu, X., & Yu-Lei, D. (2024) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2024.09.078 · Cited by 31
The Interface of Gene Editing with Regenerative Medicine
Farag, V., Devey, E. A., & Leong, K. W. (2024) · Engineering · doi:10.1016/j.eng.2024.10.019 · Cited by 31
Mini-review: advances in 3D bioprinting of vascularized constructs
Bova, L., Billi, F., & Cimetta, E. (2020) · Biology Direct · doi:10.1186/s13062-020-00273-4 · Cited by 31
Li, M., Fu, T., Yang, S., Pan, L., Tang, J., Chen, M., Liang, P., Gao, Z., & Guo, L. (2021) · In Vitro Cellular & Developmental Biology - Animal · doi:10.1007/s11626-021-00591-5 · Cited by 31
Varghese, R., Salvi, S., Sood, P., Karsiya, J., & Kumar, D. (2022) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2022.100081 · Cited by 31
Biofabrication of engineered blood vessels for biomedical applications
Laowpanitchakorn, P., Zeng, J., Piantino, M., Uchida, K., Katsuyama, M., & Matsusaki, M. (2024) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2024.2330339 · Cited by 31
Molecular Staples for Tough and Stretchable Adhesion in Integrated Soft Materials
Chen, B., Yang, J., Bai, R., & Suo, Z. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900810 · Cited by 31
Cui, H., Cai, J., He, H., Ding, S., Long, Y., & Lin, S. B. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127952 · Cited by 30
Advances in Cell‐Rich Inks for Biofabricating Living Architectures
Almeida‐Pinto, J., Moura, B. S., Gaspar, V. M., & Mano, J. F. (2024) · Advanced Materials · doi:10.1002/adma.202313776 · Cited by 30
Design considerations and biomaterials selection in embedded extrusion 3D bioprinting
Yogeshwaran, S., Hosseinabadi, H. G., Gendy, D. E., & Miri, A. K. (2024) · Biomaterials Science · doi:10.1039/d4bm00550c · Cited by 30
3D bioprinting of tissues and organs for systemic diseases and localized injuries
Ng, W. K., & Bártolo, P. (2026) · Military Medical Research · doi:10.1016/j.mmr.2026.100006 · Cited by 30
Additive manufacturing in respiratory sciences – Current applications and future prospects
Bock, S., Rades, T., Rantanen, J., & Scherließ, R. (2022) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2022.114341 · Cited by 30
4D Thermo-Responsive Smart hiPSC-CM Cardiac Construct for Myocardial Cell Therapy
Hann, S.-Y., Cui, H., Esworthy, T. J., & Zhang, L. G. (2023) · International Journal of Nanomedicine · doi:10.2147/ijn.s402855 · Cited by 30
Jung, S. H., Jang, B. H., Kwon, S., Park, S. J., Park, T., & Kang, J. H. (2023) · Advanced Materials · doi:10.1002/adma.202211149 · Cited by 30
Cardiac regeneration – Past advancements, current challenges, and future directions
Pezhouman, A., Nguyen, N. B., Kay, M., Kanjilal, B., Noshadi, I., & Ardehali, R. (2023) · Journal of Molecular and Cellular Cardiology · doi:10.1016/j.yjmcc.2023.07.009 · Cited by 30
Fibrosis in tissue engineering and regenerative medicine: treat or trigger?
Fernández‐Colino, A., Iop, L., Ferreira, M. S. V., & Mela, P. (2019) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2019.07.007 · Cited by 30
Biofabrication strategies for engineering heterogeneous artificial tissues
Ambhorkar, P., Rakin, R. H., Wang, Z., Kumar, H., & Kim, K. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101459 · Cited by 30
The microparticulate inks for bioprinting applications
An, C., Zhang, S., Xu, J., Zhang, Y., Dou, Z., Shao, F., Long, C., Yang, J., Wang, H., & Liu, J. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100930 · Cited by 29
Polyelectrolytes for Environmental, Agricultural, and Medical Applications
Delgado, M. Z., Aranda, F. L., Hernández-Tenorio, F., Garrido‐Miranda, K. A., Melendrez, M. F., & Palacio, D. A. (2024) · Polymers · doi:10.3390/polym16101434 · Cited by 29
Dissecting endothelial cell heterogeneity with new tools
Zhong, J., Gao, R., Zhang, X., Yang, J., Liu, Y., Ma, J., & Chen, Q. (2025) · Cell Regeneration · doi:10.1186/s13619-025-00223-3 · Cited by 30
Yuan, Z., Bai, X., Li, S., Fu, Y., Wan, Z., Guo, X., Zhai, M., Yi, J., Liu, Y., Zhou, Y., et al. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202500475 · Cited by 29
Embedded 3D Printing of Ultrasound‐Compatible Arterial Phantoms with Biomimetic Elasticity
Wu, Y., Chee, A. J. Y., Golzar, H., Yu, A. C. H., & Tang, X. S. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202110153 · Cited by 29
Tissue-engineered heart chambers as a platform technology for drug discovery and disease modeling
Mousavi, A., Stefanek, E., Jafari, A., Ajji, Z., Naghieh, S., Akbari, M., & Savoji, H. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.212916 · Cited by 29
A Survey on Additively Manufactured Nanocomposite Biomaterial for Orthopaedic Applications
Gowtham, S., Kumar, T. C. A., Devi, N. S. M. P. L., Chakravarthi, M. K., Kumar, S. P., Karthik, R., Anandaram, H., Kumar, N. M., & Ramaswamy, K. (2022) · Journal of Nanomaterials · doi:10.1155/2022/8998451 · Cited by 29
Wu, H., Shi, S., Liu, Y., Zhang, Q., Lam, R. H. W., Lim, C. T., & Hu, J. (2023) · Biofabrication · doi:10.1088/1758-5090/acdaf9 · Cited by 29
Bioprinting living organs: The next milestone in organ transplantation?
Wang, P., Hao, R., Gao, C., Wen, C., Pan, H., Liu, W., Ruan, C., & Lu, W. W. (2023) · The Innovation Life · doi:10.59717/j.xinn-life.2023.100019 · Cited by 29
Song, B., Wang, C., Fan, S., Zhang, L., Zhang, C., Xiong, W., Hu, Y., Chu, J., Wu, D. Q., & Li, J. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202305245 · Cited by 29
Multiscale embedded printing of engineered human tissue and organ equivalents
Zhang, C., Hua, W., Mitchell, K., Raymond, L., Delzendehrooy, F., Wen, L., Do, C., Chen, J., Yang, Y., Linke, G., et al. (2024) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2313464121 · Cited by 29
Biofabrication & cryopreservation of tissue engineered constructs for on-demand applications
Budharaju, H., Sundaramurthi, D., & Sethuraman, S. (2024) · Biofabrication · doi:10.1088/1758-5090/ad7906 · Cited by 29
Defects in Axonal Transport in Inherited Neuropathies
Beijer, D., Sisto, A., Lent, J. V., Baets, J., & Timmerman, V. (2019) · Journal of Neuromuscular Diseases · doi:10.3233/jnd-190427 · Cited by 29
Ferrari, E., Gallo, M., Wang, C., Zhang, L., Taramasso, M., Maisano, F., Pirelli, L., Berdajs, D. A., & von Segesser, L. K. (2019) · Interactive Cardiovascular and Thoracic Surgery · doi:10.1093/icvts/ivz250 · Cited by 29
Camman, M., Joanne, P., Agbulut, O., & Hélary, C. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.05.040 · Cited by 29
Mohammadi, M. H., Okhovatian, S., Savoji, H., Campbell, S. B., Lai, B. F. L., Wu, J., Pascual‐Gil, S., Bannerman, D., Rafatian, N., Li, R., et al. (2022) · Advanced Biology · doi:10.1002/adbi.202101165 · Cited by 28
Redefining Medical Applications with Safe and Sustainable 3D Printing
Khan, S. B., Irfan, S., Zhang, Z., & Yuan, W. (2025) · ACS Applied Bio Materials · doi:10.1021/acsabm.4c01923 · Cited by 28
Kong, F., Mehwish, N., Niu, X., Lin, M., Rong, X., Hu, F., & Lee, B. H. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100612 · Cited by 28
Fabrication of human myocardium using multidimensional modelling of engineered tissues
Montero‐Calle, P., Flandes‐Iparraguirre, M., Mountris, K. A., Nava, A., Laita, N., Rosales, R. M., Iglesias‐García, O., De‐Juan‐Pardo, E. M., Atienza, F., Fernández‐Santos, M. E., et al. (2022) · Biofabrication · doi:10.1088/1758-5090/ac8cb3 · Cited by 28
Immohr, M. B., Adrego, F. D. S., Teichert, H. L., Schmidt, V., Sugimura, Y., Bauer, S. J., Barth, M., Lichtenberg, A., & Akhyari, P. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac9f91 · Cited by 28
Meng, W., & Guo, H.-D. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24054577 · Cited by 28
Zhang, S., Xu, G., Wu, J., Liu, X., Fan, Y. Z., Chen, J., Wallace, G. G., & Gu, Q. (2023) · Small Methods · doi:10.1002/smtd.202300685 · Cited by 28
Progress of organoid platform in cardiovascular research
Du, X., Jia, H., Chang, Y., Zhao, Y., & Song, J. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.05.043 · Cited by 29
Salem, T. T., Frankman, Z. D., & Churko, J. M. (2021) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2021.0088 · Cited by 28
Piazza, E. D., Pandolfi, E., Cacciotti, I., Fattore, A. D., Tozzi, A. E., Secinaro, A., & Borro, L. (2021) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph182010806 · Cited by 28
FSTL-1 loaded 3D bioprinted vascular patch regenerates the ischemic heart tissue
Hwang, B., Korsnick, L., Shen, M., Jin, L., Singh, Y., Abdalla, M., Bauser‐Heaton, H. D., & Serpooshan, V. (2024) · iScience · doi:10.1016/j.isci.2024.110770 · Cited by 27
Zhao, Y., Yu, P., Tao, Y., Zhang, X., Li, M., Xu, W., & Zhao, J. (2025) · Virtual and Physical Prototyping · doi:10.1080/17452759.2025.2460211 · Cited by 27
Pushp, P., Nogueira, D. E. S., Rodrigues, C. A. V., Ferreira, F. C., Cabral, J. M. S., & Gupta, M. K. (2020) · Stem Cell Reviews and Reports · doi:10.1007/s12015-020-10061-2 · Cited by 27
Global perspective and African outlook on additive manufacturing research − an overview
Klenam, D. E. P., Bamisaye, O. S., Williams, I. E., der Merwe, J. W. V., & Bodunrin, M. O. (2022) · Manufacturing Review · doi:10.1051/mfreview/2022033 · Cited by 27
Mending a broken heart by biomimetic 3D printed natural biomaterial-based cardiac patches: a review
Rosellini, E., Cascone, M. G., Guidi, L., Schubert, D. W., Roether, J. A., & Boccaccini, A. R. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1254739 · Cited by 27
Revolutionizing healthcare: Emerging frontiers in 3D bioprinting of tissues and organs
Ochieng, B. O., Arroyan, Y. N., Onyango, B., Kong, L., Wang, G., & Ye, Z. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113210 · Cited by 28
Robinson, T. M., Talebian, S., Foroughi, J., Yue, Z., Fay, C., & Wallace, G. G. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00260 · Cited by 27
Bilge, S., Ergene, E., Basturkmen, E. T., Gökyer, Ş., Donar, Y. O., Sınağ, A., & Huri, P. Y. (2021) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-021-06534-6 · Cited by 27
Mei, X., Zhu, D., Li, J., Huang, K., Hu, S., Li, Z., Abad, B. L. D. J., & Cheng, K. (2021) · Med · doi:10.1016/j.medj.2021.10.001 · Cited by 27
Tripathi, S., Ansari, A. A., Singh, M., Dash, M., Kumar, P., Singh, H., Panda, B., Nukavarapu, S. P., Camci‐Unal, G., Li, B., et al. (2025) · Materials Horizons · doi:10.1039/d5mh00501a · Cited by 26
Stimuli-responsive hybrid materials for 4D in vitro tissue models
Aizarna‐Lopetegui, U., Bittinger, S. C., Álvarez, N., Henriksen‐Lacey, M., & de Aberasturi, D. J. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.102035 · Cited by 28
Unconventional bioprinting modalities for advanced tissue biofabrication
Derman, İ. D., Kim, M. H., Sarikaya, M. D., Yilmaz, Y. O., Aliftiras, E. G., Stepanyants, V., Rivera, T., & Ozbolat, I. T. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123704 · Cited by 27
Vascular Tissue Engineering: Advanced Techniques and Gene Editing in Stem Cells for Graft Generation
Chen, S.-G., Ugwu, F. N., Li, W., Caplice, N. M., Petcu, E. B., Yip, S. P., & Huang, C. (2020) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2019.0264 · Cited by 26
Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Zubrzycki, J., Estrada, Q., Staniszewski, M., & Marchewka, M. (2022) · Advances in Science and Technology – Research Journal · doi:10.12913/22998624/154024 · Cited by 26
Keeping It Organized: Multicompartment Constructs to Mimic Tissue Heterogeneity
Sanchez-Rubio, A., Jayawarna, V., Maxwell, E., Dalby, M. J., & Salmerón‐Sánchez, M. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202202110 · Cited by 26
Cardiac organoid: multiple construction approaches and potential applications
Yang, Z., Zhang, Y., Wang, J., Yin, J., Wang, Z., & Pei, R. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb00783a · Cited by 26
Organ bioprinting: progress, challenges and outlook
Wu, Y. B., Qin, M., & Yang, X. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb01630g · Cited by 26
Engineering Biomaterials to Guide Heart Cells for Matured Cardiac Tissue
Jang, Y., Park, Y., & Kim, J. (2020) · Coatings · doi:10.3390/coatings10100925 · Cited by 26
3D Bioprinting of Thick Adipose Tissues with Integrated Vascular Hierarchies
Goldfracht, I., Machour, M., Michael, I., Bulatova, M., Zavin, J., & Levenberg, S. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202410311 · Cited by 25
Advances in 3D Bioprinting: Materials, Processes, and Emerging Applications
Jose, S. A., Evtimow, A., & Menezes, P. L. (2026) · Micromachines · doi:10.3390/mi17030282 · Cited by 25
Applications of 3D Bio-Printing in Tissue Engineering and Biomedicine
Jiang, W., Mei, H., & Zhao, S. (2021) · Journal of Biomedical Nanotechnology · doi:10.1166/jbn.2021.3078 · Cited by 25
3D printing of bioinspired compartmentalized capsular structure for controlled drug release
Li, J., Wu, M., Chen, W., Liu, H., Tan, D., Shen, S., Lei, Y., & Xue, L. (2021) · Journal of Zhejiang University SCIENCE B · doi:10.1631/jzus.b2100644 · Cited by 25
Zhang, B., Sun, F., Lü, Y., Wang, Z., Shen, Z., Yuan, L., Wu, Q., Wu, C., & Shi, H. (2022) · Journal of Materials Chemistry B · doi:10.1039/d1tb02100a · Cited by 25
History and Evolution of Additive Manufacturing
Singh, S., Mehla, S., Bhargava, S. K., & Ramakrishna, S. (2022) · Springer eBooks · doi:10.1007/978-981-19-2293-0_2 · Cited by 25
Kamaraj, M., Giri, P. S., Mahapatra, S., Pati, F., & Rath, S. N. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.11.064 · Cited by 25
Wu, P., Asada, H., Hakamada, M., & Mabuchi, M. (2022) · Advanced Materials · doi:10.1002/adma.202209149 · Cited by 25
Aliyazdi, S., Frisch, S., Hidalgo, A., Frank, N. A., Krug, D., Müller, R., Schaefer, U. F., VOGT, T. M., Loretz, B., & Lehr, C. (2023) · Biofabrication · doi:10.1088/1758-5090/acd95e · Cited by 25
Application of 4D printing and bioprinting in cardiovascular tissue engineering
Zhou, Z., Tang, W., Yang, J., & Fan, C. (2023) · Biomaterials Science · doi:10.1039/d3bm00312d · Cited by 25
Modified ECM-Based Bioink for 3D Printing of Multi-Scale Vascular Networks
Cohen, R., Baruch, E., Cabilly, I., Shapira, A., & Dvir, T. (2023) · Gels · doi:10.3390/gels9100792 · Cited by 25
Self-citationA Universal Strategy to Construct High‐Performance Homo‐ and Heterogeneous Microgel Assembly Bioinks
Xu, X., Li, H., Chen, J., Lv, C., He, W., Zhang, X., Feng, Q., & Dong, H. (2024) · Small Methods · doi:10.1002/smtd.202400223 · Cited by 25
A critical review on advances and challenges of bioprinted cardiac patches
Zhang, X., Zhao, G., Ma, T., Simmons, C. A., & Santerre, J. P. (2024) · Acta Biomaterialia · doi:10.1016/j.actbio.2024.09.056 · Cited by 25
Raising the Bar: Progress in 3D-Printed Hybrid Bone Scaffolds for Clinical Applications: A Review
Khan, A. R., Grewal, N. S., Jun, Z., Tawfiq, F. M. O., Tchier, F., Zulqarnain, R. M., & Zhang, H. (2024) · Cell Transplantation · doi:10.1177/09636897241273562 · Cited by 25
Tissue engineered heart repair from preclinical models to first-in-patient studies
Zimmermann, W. (2020) · Current Opinion in Physiology · doi:10.1016/j.cophys.2020.02.001 · Cited by 25
Stem Cells and Their Cardiac Derivatives for Cardiac Tissue Engineering and Regenerative Medicine
Roshanbinfar, K., Esser, T. U., & Engel, F. B. (2020) · Antioxidants and Redox Signaling · doi:10.1089/ars.2020.8193 · Cited by 25
Biologia futura: animal testing in drug development—the past, the present and the future
Sántha, M. (2020) · Biologia Futura · doi:10.1007/s42977-020-00050-4 · Cited by 25
Yang, G., Mahadik, B. P., Choi, J. Y., Yu, J. R., Mollot, T., Jiang, B., He, X., & Fisher, J. P. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.11.040 · Cited by 25
Engineering Spatiotemporal Control in Vascularized Tissues
Khanna, A., Oropeza, B. P., & Huang, N. F. (2022) · Bioengineering · doi:10.3390/bioengineering9100555 · Cited by 25
3D bioprinting vascular networks in suspension baths
Li, S., Jin, J., Zhang, C., Yang, X., Liu, Y., Lei, P., & Hu, Y. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2022.101729 · Cited by 25
Zanderigo, G., Afghah, F., Colosimo, B. M., & Raman, R. (2025) · Device · doi:10.1016/j.device.2025.100927 · Cited by 24
Dynamic mechanobiology of cardiac cells and tissues: Current status and future perspective
Wang, C., Ramahdita, G., Genin, G. M., Huebsch, N., & Ma, Z. (2023) · Biophysics Reviews · doi:10.1063/5.0141269 · Cited by 24
Semi-Solid Extrusion (SSE) in Pharmaceuticals
Funk, N. L., Leão, J., de Oliveira, T. V., & Beck, R. C. R. (2023) · Springer eBooks · doi:10.1007/978-981-99-2404-2_5 · Cited by 24
Advancing cardiac regeneration through 3D bioprinting: methods, applications, and future directions
Zheng, Z., Tang, W., Li, Y., Ai, Y., Tu, Z., Yang, J., & Fan, C. (2023) · Heart Failure Reviews · doi:10.1007/s10741-023-10367-6 · Cited by 25
Kafili, G., Kabir, H., Kandeloos, A. J., Golafshan, E., Ghasemi, S., Mashayekhan, S., & Taebnia, N. (2023) · Journal of Biomaterials Applications · doi:10.1177/08853282231207216 · Cited by 24
Prediction of textural properties of 3D-printed food using response surface methodology
Lee, C. P., & Hashimoto, M. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e27658 · Cited by 24
3D bioprinting of dense cellular structures within hydrogels with spatially controlled heterogeneity
Abaci, A., & Güvendiren, M. (2024) · Biofabrication · doi:10.1088/1758-5090/ad52f1 · Cited by 24
iPS cell therapy 2.0: Preparing for next‐generation regenerative medicine
Hui, K. K., & Yamanaka, S. (2024) · BioEssays · doi:10.1002/bies.202400072 · Cited by 24
Nano‐ and Microfabrication for Engineering Native‐Like Muscle Tissues
Gao, L., Ma, L., Yin, X., Luo, Y., Yang, H., & Zhang, B. (2020) · Small Methods · doi:10.1002/smtd.201900669 · Cited by 24
Evaluation and preservation of vascular architectures in decellularized whole rat kidneys
Feng, H., Xu, Y., Luo, S., Dang, H., Liu, K., & Sun, W. Q. (2020) · Cryobiology · doi:10.1016/j.cryobiol.2020.06.003 · Cited by 24
Lee, J., Park, D., Seo, Y., Chung, J. J., Jung, Y., & Kim, S. H. (2020) · Advanced Materials · doi:10.1002/adma.202002096 · Cited by 24
Metadata
- Authors
- Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T.
- Affiliations
- Tel Aviv University (IL)
- Corresponding author
- Dvir, Tal
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2019-04-15
- Volume
- 6
- Issue
- 11
- Pages
- 1900344-1900344
- ISSN
- 2198-3844 (ISSN-L)
- PMC
- PMC6548966
- OpenAlex
- W2937820813
- Cited by
- 1,042
- References
- 36
- Citations by year
- 2026: 59 · 2025: 106 · 2024: 126 · 2023: 187 · 2022: 157 · 2021: 212 · 2020: 142 · 2019: 51
- FWCI
- 49.47
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Advanced Science (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- European Research Council (637943)
- Israel Science Foundation (700/13)
- Ministry of Science, Technology and Space (3‐12587)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, cardiac tissue engineering, personalized medicine, pluripotent stem cells, cardiomyocytes, endothelial cells, extracellular matrix hydrogel, bioinks, cardiac cell transplantation, drug screening, organ printing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.