3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Open accessThe DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
Generation of thick vascularized tissues that fully match the patient still remains an unmet challenge in cardiac tissue engineering. Here, a simple approach to 3D‐print thick, vascularized, and perfusable cardiac patches that completely match the immunological, cellular, biochemical, and anatomical properties of the patient is reported. To this end, a biopsy of an omental tissue is taken from patients. While the cells are reprogrammed to become pluripotent stem cells, and differentiated to cardiomyocytes and endothelial cells, the extracellular matrix is processed into a personalized hydrogel. Following, the two cell types are separately combined with hydrogels to form bioinks for the parenchymal cardiac tissue and blood vessels. The ability to print functional vascularized patches according to the patient's anatomy is demonstrated. Blood vessel architecture is further improved by mathematical modeling of oxygen transfer. The structure and function of the patches are studied in vitro, and cardiac cell morphology is assessed after transplantation, revealing elongated cardiomyocytes with massive actinin striation. Finally, as a proof of concept, cellularized human hearts with a natural architecture are printed. These results demonstrate the potential of the approach for engineering personalized tissues and organs, or for drug screening in an appropriate anatomical structure and patient‐specific biochemical microenvironment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The fact that macroscale contractile function has not yet been achieved in a 3D printed, perfusable, chambered heart model reflects the challenges associated with handling mature cardiac muscle cells.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Yet, inclusion of contiguous, living muscle to support pump function has not been achieved.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Multiple studies have demonstrated the capacity to print entire heart organ models using biological materials, but the resulting constructs have either lacked cells8, 9 or evidence of electromechanical function18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
The cited source says what the claim attributes to it.
In the citing paper
“Notably, we show that the hChaMP can maintain these functions for at least 6 weeks, while most similar models have been characterized only up to 2 weeks after fabrication6–8, 18.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [18]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heart Disease and Stroke Statistics—2017 Update: A Report From the American Heart Association
Benjamin, E. J., Blaha, M. J., Chiuve, S. E., Cushman, M., Das, S. R., Deo, R., de Ferranti, S. D., Floyd, J., Fornage, M., Gillespie, C., et al. (2017) · Circulation · doi:10.1161/cir.0000000000000485 · Cited by 12,591
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Lian, X., Hsiao, C., Wilson, G., Zhu, K., Hazeltine, L. B., Azarin, S. M., Raval, K. K., Zhang, J., Kamp, T. J., & Palecek, S. P. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1200250109 · Cited by 1,717
Scaffolding in tissue engineering: general approaches and tissue-specific considerations
Chan, B. P., & Leong, K. W. (2008) · European Spine Journal · doi:10.1007/s00586-008-0745-3 · Cited by 1,708
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Nanotechnological strategies for engineering complex tissues
Dvir, T., Timko, B. P., Kohane, D. S., & Langer, R. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.246 · Cited by 1,367
Self-citation
Research works printed but not linked: 1
- Members W. G., 2017, Circulation, 135, e146
Cited by
Items 701–800 of 1,000
Engineering Models of the Heart Left Ventricle
Okhovatian, S., Mohammadi, M. H., Rafatian, N., & Radisic, M. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00636 · Cited by 10
A Mucin‐Based Bio‐Ink for 3D Printing of Objects with Anti‐Biofouling Properties
Rickert, C. A., Mansi, S., Fan, D., Mela, P., & Lieleg, O. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300198 · Cited by 10
Engineering vascularized organotypic tissues via module assembly
Zhou, Z., Liu, C., Guo, Y., Pang, Y., & Sun, W. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acfcf2 · Cited by 9
Dressed in Collagen: 2D and 3D Cardiac Fibrosis Models
Cardona-Timoner, M., Gomes, R. N., & Nascimento, D. S. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms26073038 · Cited by 9
Zhao, Y., Khosravi, R., Cheung, K., Shen, K., Wang, Y., Landau, S., Okhovatian, S., Wu, Q., Lu, R. X. Z., Wagner, K. T., et al. (2025) · Cell Biomaterials · doi:10.1016/j.celbio.2025.100075 · Cited by 9
A roadmap for the implementation of 3D-printed organs in healthcare
Zhang, G., Zhang, T., & Yin, F.-F. (2025) · Device · doi:10.1016/j.device.2025.100847 · Cited by 9
Recent Advances in Cardiac Tissue Engineering: Innovations and Future Directions
khafaji, A. T. A., Barakat, A. M., Zaidy, A. J. A., Taan, A. A., & Al-Aouadi, R. F. A. (2025) · Biotechnology Journal · doi:10.1002/biot.70116 · Cited by 9
Liu, Z., Xuan, L., Hou, Y., Xie, T., Li, J., Cai, J., Zhang, S., Miao, Y., Hou, N., He, G., et al. (2026) · Advanced Science · doi:10.1002/advs.202518646 · Cited by 9
Immohr, M. B., Teichert, H. L., Adrego, F. D. S., Schmidt, V., Sugimura, Y., Bauer, S. J., Barth, M., Lichtenberg, A., & Akhyari, P. (2023) · Bioengineering · doi:10.3390/bioengineering10070787 · Cited by 9
The third dimension of tumor microenvironment—The importance of tumor stroma in 3D cancer models
Plavá, J., Čeháková, M., Kuniaková, M., Trnkova, L., Cihova, M., Boháč, M., & Danišovič, Ľ. (2023) · Experimental Biology and Medicine · doi:10.1177/15353702231198050 · Cited by 9
Kong, J., Kim, J. J., Riva, L., Ginestra, P. S., & Cho, D. (2024) · Biofabrication · doi:10.1088/1758-5090/ad6f46 · Cited by 9
Ghosh, P. (2024) · MGM Journal of Medical Sciences · doi:10.4103/mgmj.mgmj_210_24 · Cited by 9
Gel-Based Suspension Medium Used in 3D Bioprinting for Constructing Tissue/Organ Analogs
Luo, Y., Xu, R., Hu, Z., Ni, R., Zhu, T., Zhang, H., & Zhu, Y. (2024) · Gels · doi:10.3390/gels10100644 · Cited by 9
Additive Manufacturing and Chemical Engineering: Looking for Synergies from a Bibliometric Study
Estévez, R., Quijada‐Maldonado, E., Romero, J., & Abejón, R. (2025) · Applied Sciences · doi:10.3390/app15062962 · Cited by 9
Current State of the Art in Ventricle Tissue Engineering
Birla, R. K. (2020) · Frontiers in Cardiovascular Medicine · doi:10.3389/fcvm.2020.591581 · Cited by 9
Parsons, R. F., Baquerizo, A., Kirchner, V. A., Malek, S. K., Desai, C. S., Schenk, A. D., Finger, E. B., Brennan, T. V., Parekh, K. R., MacConmara, M. P., et al. (2021) · American Journal of Transplantation · doi:10.1111/ajt.16740 · Cited by 9
Application of 3D Printing Technology in the Medical Field
Gao, B., Zhao, H., Yu, H., Lin, Y., Liu, J., & Wang, J. (2022) · Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering) · doi:10.2174/2352096515666221006142356 · Cited by 9
Cardiac Regeneration: the Heart of the Issue
Carotenuto, F., Manzari, V., & Nardo, P. D. (2021) · Current Transplantation Reports · doi:10.1007/s40472-021-00319-0 · Cited by 9
Iwase, K., Stauss, S., Gambe, Y., Miyazaki, R., & Honma, I. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c00076 · Cited by 9
Soft-tissue-mimicking using silicones for the manufacturing of soft phantoms by fresh 3D printing
Tejo‐Otero, A., Colly, A., Courtial, E., Fenollosa-Artés, F., Buj-Corral, I., & Marquette, C. A. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2021-0079 · Cited by 9
Mao, M., Chen, P., He, J., Zhu, G., Li, X., & Li, D. (2022) · Small · doi:10.1002/smll.202108102 · Cited by 9
Accolla, R. P., Simmons, A., & Stabler, C. L. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202200243 · Cited by 9
Fazal, F., Melchels, F. P. W., McCormack, A., Silva, A. F., Callanan, A., Koutsos, V., & Radacsi, N. (2023) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2023.105665 · Cited by 9
Wong, H. P. N., So, W. Z., Fong, K. Y., Tiong, H. Y., Kulkarni, S., Castellani, D., Somani, B. K., & Gauhar, V. (2024) · Editor-in-Chief s Voice List of Authors is an Important Element in a Scientific Publication · doi:10.5173/ceju.2024.121 · Cited by 8
Kong, M., Wu, Z., Zheng, Z., Zhang, B., Zeng, Y., Deng, H., Feng, D., Zhang, W., Li, C., Fu, X., et al. (2025) · Interdisciplinary medicine · doi:10.1002/inmd.20240085 · Cited by 8
Biocompatibility of decellularized spinach leaves
Gershlak, J. R., Burgess, C. K., Fontana, G., Perreault, L. R., Thyden, R., Shrem, L. A., dos Santos, A., Weathers, P. J., Dominko, T., Murphy, W. L., et al. (2025) · npj Biomedical Innovations. · doi:10.1038/s44385-025-00028-8 · Cited by 8
Patel, P. S., Pandey, G., Kumar, A., Misra, S. K., Roy, S., Awasthi, D. A., Wagh, S. S., Srivastava, S., & Kapoor, A. (2026) · Biomedical Materials & Devices · doi:10.1007/s44174-026-00671-8 · Cited by 8
3D bioprinting: current status and future prospects in tissue and organ regeneration
Selvakumar, M., Dhanasekar, J., Nandhakumaran, S., & Sudhamani, T. (2026) · Future Journal of Pharmaceutical Sciences · doi:10.1186/s43094-026-00982-z · Cited by 8
Photomodulated Extrusion as a Localized Endovascular Hydrogel Deposition Method
Dobashi, Y., Ku, J. C., Ramjist, J. M., Pasarikovski, C. R., Walus, K., Madden, J. D. W., & Yang, V. X. D. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202202632 · Cited by 8
3D puzzle-inspired construction of large and complex organ structures for tissue engineering
Xie, Z., Zeng, J., Miyagawa, S., Sawa, Y., & Matsusaki, M. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100726 · Cited by 8
Challenges and Innovative Strategies in 3D Printing of Natural Biomolecular Hydrogels
Qiu, J., Ma, S., & Qu, X. (2025) · Nano Select · doi:10.1002/nano.202400149 · Cited by 8
Kotani, T., Hananouchi, T., & Sakai, S. (2025) · Biomedical Materials · doi:10.1088/1748-605x/adc0d6 · Cited by 8
Pan, X., Liu, S., Long, M., Peng, R., Hu, L., Liu, Y., & Huang, W. (2025) · Biomaterials Science · doi:10.1039/d5bm00734h · Cited by 8
Tissue engineering solutions to replace contractile function during pediatric heart surgery
Williams, S. K., & Birla, R. K. (2020) · Tissue and Cell · doi:10.1016/j.tice.2020.101452 · Cited by 8
Quantitative Evaluation of Cardiac Cell Interactions and Responses to Cyclic Strain
Tran, R. D. H., Morris, T. A., Gonzalez, D., Hetta, A. H. S. H. A., & Grosberg, A. (2021) · Cells · doi:10.3390/cells10113199 · Cited by 8
Morita, T., Watanabe, S., & Sasaki, S. (2022) · Precision Engineering · doi:10.1016/j.precisioneng.2022.09.004 · Cited by 8
Nature-inspired vascularised materials and devices for biomedical engineering
Sree, K. A., Yagnik, A., Chordiya, P. K., Choudhury, K. R., & Kumar, P. (2022) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2022.100444 · Cited by 8
Physical model of end-diastolic and end-systolic pressure-volume relationships of a heart
Zhang, Y., Kalhöfer-Köchling, M., Bodenschatz, E., & Wang, Y. (2023) · Frontiers in Physiology · doi:10.3389/fphys.2023.1195502 · Cited by 8
Big data y nuevas tecnologías de la información: qué necesita saber el cardiólogo
Baladrón, C., de Diego, J. J. G., & Amat-Santos, I. J. (2020) · Revista Española de Cardiología · doi:10.1016/j.recesp.2020.06.017 · Cited by 8
Cardiac Tissue Engineering: A Role for Natural Biomaterials
Pushp, P., & Gupta, M. K. (2020) · Advanced structured materials · doi:10.1007/978-3-030-54027-2_18 · Cited by 8
Király, L., & Vijayavenkataraman, S. (2021) · Micromachines · doi:10.3390/mi12030332 · Cited by 8
Additive Manufacturing Approaches toward the Fabrication of Biomaterials
Müller, F. J., & Fenton, O. S. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202100670 · Cited by 8
Construction of Lung Tumor Model for Drug Screening Based on 3D Bio-Printing Technology
Yang, Y., Yang, G., Liu, X., Xu, Y., Zhao, S., Zhang, W., & Xu, M. (2021) · Journal of Biomaterials and Tissue Engineering · doi:10.1166/jbt.2021.2706 · Cited by 8
Advances in Additive Manufacturing and Its Numerical Modelling
Ahmad, S., Rab, S., & Soni, H. (2023) · Springer eBooks · doi:10.1007/978-981-19-1550-5_136-1 · Cited by 8
Recent advances in personalized 3D bioprinted tissue models
Walters-Shumka, J. P., Sorrentino, S., Nygaard, H. B., & Willerth, S. M. (2023) · MRS Bulletin · doi:10.1557/s43577-023-00551-2 · Cited by 8
Rajput, S., Malviya, R., Sridhar, S. B., Wadhwa, T., & Shareef, J. (2025) · Additive Manufacturing Frontiers · doi:10.1016/j.amf.2025.200284 · Cited by 7
3D Printed Tubulointerstitium Chip as an In Vitro Testing Platform
Addario, G., Eussen, D., Djudjaj, S., Boor, P., Moroni, L., & Mota, C. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300440 · Cited by 7
Rahav, N., Marrero, D., Soffer, A., Glickman, E., Beldjilali‐Labro, M., Yaffe, Y., Tadmor, K., Leichtmann‐Bardoogo, Y., Ashery, U., & Maoz, B. M. (2024) · Advanced Science · doi:10.1002/advs.202305555 · Cited by 7
Biomechanical and mechanobiological design for bioprinting functional microvasculature
Zhang, D., Liu, J., Liu, X., & Fan, Y. (2025) · Applied Physics Reviews · doi:10.1063/5.0227692 · Cited by 7
Bobrova, M. M., Safonova, L. A., Efimov, А. Е., Lyundup, A. V., Mozheiko, N., Агапова, О. И., & Agapov, I. I. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14112313 · Cited by 7
3D Bioprinting of Induced Pluripotent Stem Cells and Disease Modeling
Liang, S., Su, Y., & Yao, R. (2023) · Handbook of experimental pharmacology · doi:10.1007/164_2023_646 · Cited by 7
Promises and challenges of cardiac organoids
Li, J., Yang, J., Zhao, D., Lei, W., & Hu, S. (2023) · Mammalian Genome · doi:10.1007/s00335-023-09987-y · Cited by 7
Kim, B., Kim, J. W., & Lee, S. (2024) · International Journal of Stem Cells · doi:10.15283/ijsc23146 · Cited by 7
Andrée, B., Voß, N., Kriedemann, N., Triebert, W., Teske, J., Mertens, M., Witte, M., Szádocka, S., Hilfiker, A., Aper, T., et al. (2024) · Scientific Reports · doi:10.1038/s41598-024-64022-7 · Cited by 7
Bioengineering platforms for cell therapeutics derived from pluripotent and direct reprogramming
Jin, Y., & Cho, S. (2021) · APL Bioengineering · doi:10.1063/5.0040621 · Cited by 7
Epoxy acrylate-based shape memory polymer via 3D printing
Shan, W., Zhong, H., Mo, H., Zhao, S., & Liu, P. (2021) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2021.91 · Cited by 7
Wagner, T., Hummelink, S., & Ulrich, D. J. O. (2022) · Journal of Tissue Viability · doi:10.1016/j.jtv.2022.06.007 · Cited by 7
Recent Advances in 3 D Printing in the Design and Application of Biopolymer‐Based Scaffolds
Milojević, M., Maver, U., & Vihar, B. (2023) · Wiley eBooks · doi:10.1002/9783527827657.ch17 · Cited by 7
Applications of 3D printing in aging
Ma, M., Gu, J., Wang, D., Bi, S., Liu, R., Zhang, X., Yang, J. Y., & Zhang, Y. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.732 · Cited by 7
Moss, M. F. (2023) · Journal of Medical Ethics · doi:10.1136/jme-2023-108925 · Cited by 7
Deciphering and reconstitution of positional information in the human brain development
Wang, Y., Liu, C., & Xu, P. (2021) · Cell Regeneration · doi:10.1186/s13619-021-00091-7 · Cited by 7
Evlen, H., Ziyamukhamedova, U., Juraev, D., & Abdukarimov, M. (2023) · E3S Web of Conferences · doi:10.1051/e3sconf/202340103040 · Cited by 6
Modeling cellular self-organization in strain-stiffening hydrogels
Erhardt, A. H., Peschka, D., Dazzi, C., Schmeller, L., Petersen, A., Checa, S., Münch, A., & Wagner, B. A. (2024) · Computational Mechanics · doi:10.1007/s00466-024-02536-7 · Cited by 6
Du, B., Dai, Z., Wang, H., Ren, Z., & Li, D. (2025) · Reviews in Cardiovascular Medicine · doi:10.31083/rcm26697 · Cited by 6
Ali, S., Al-Otoom, A. Y., Aljarrah, M., Mahasneh, H., & Saleh, E. (2025) · Materials Today Sustainability · doi:10.1016/j.mtsust.2025.101129 · Cited by 6
Tang, T., Nawab, P. K., Prabhudesai, P., Alfarhan, S., Pesqueira, I., VanWormer, K., Li, J., Li, D., Jin, K., & Li, X. (2025) · Virtual and Physical Prototyping · doi:10.1080/17452759.2025.2499452 · Cited by 6
Yang, J., Yue, T., He, J. X., Xiong, S., Luo, Y., & Hou, J. (2025) · Frontiers in Pharmacology · doi:10.3389/fphar.2025.1600604 · Cited by 6
Aizarna‐Lopetegui, U., Herrero‐Ruiz, A., Decarli, M. C., Urigoitia‐Asua, A., Chavarri, K., Moroni, L., Henriksen‐Lacey, M., & de Aberasturi, D. J. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202419072 · Cited by 6
3D Printing‐Based Polymer Nanocomposites for Cancer Treatment: Innovations and Perspectives
Mousavi, S. M., Kalashgrani, M. Y., Rahmanian, V., Barangizi, H., Mahmoudi, Z., Karganroudi, S. S., Rao, N. V., & Chiang, W. (2025) · The Chemical Record · doi:10.1002/tcr.202500120 · Cited by 6
Artificial intelligence-enabled Bioprinting 5.0
Bai, L., Zhang, Y., Wang, S., Liu, J., Liu, Y., & Su, J. (2025) · Bio-Design and Manufacturing · doi:10.1631/bdm.2400354 · Cited by 6
Idnani, R., & Khan, S. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00463 · Cited by 6
Kumar, P., Kumar, A., Saini, S., & Kayastha, A. M. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.202505346 · Cited by 6
Jiao, T., Wang, Z., Han, G., Liu, C., He, C., & Ma, S. (2026) · Biointerphases · doi:10.1116/6.0004978 · Cited by 6
Kajtez, J., Radeke, C., Lind, J. U., & Emnéus, J. (2023) · Journal of Visualized Experiments · doi:10.3791/65158 · Cited by 6
Park, E., Kim, J.-M., Seong, E., Lee, E. M., Chang, K., & Choi, Y. (2023) · Biomedicines · doi:10.3390/biomedicines11082141 · Cited by 6
Kar, R., Mukhopadhyay, D., & Angom, R. S. (2024) · Hearts · doi:10.3390/hearts5040031 · Cited by 6
Shyam, R., Singh, R., Bajpai, M., Palaniappan, A., & Parthasarathi, R. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00363 · Cited by 6
Kim, S. J., & Jang, J. (2024) · Journal of Cardiovascular Intervention · doi:10.54912/jci.2024.0027 · Cited by 6
Tissues with Patterned Vessels or Protein Release Induce Vascular Chemotaxis in an In Vitro Platform
Kant, R. J., Bare, C. F., & Coulombe, K. L. K. (2021) · Tissue Engineering Part A · doi:10.1089/ten.tea.2020.0269 · Cited by 6
Drawing Inspiration from Developmental Biology for Cardiac Tissue Engineers
Rafatian, N., Vizely, K., Asafen, H. A., Korolj, A., & Radisic, M. (2021) · Advanced Biology · doi:10.1002/adbi.202000190 · Cited by 6
Engineering the niche to differentiate and deploy cardiovascular cells
Gonzalez, G., Holman, A. R., Nelson, A. C., & Engler, A. J. (2021) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2021.11.003 · Cited by 6
Impressão 3D: Análise da Evolução e Seus Impactos no Mundo Científico
Silva, A. L. E., Moraes, J. A. R., Benitez, L. B., & Kaufmann, E. A. (2021) · Revista FSA · doi:10.12819/2021.18.11.6 · Cited by 6
Design and biofabrication of a leaf-inspired vascularized cell-delivery device
Sämfors, S., Niemi, E. M., Oskarsdotter, K., Egea, C. V., Mark, A., Scholz, H., & Gatenholm, P. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00199 · Cited by 6
Hybrid techniques for myocardial regeneration: state of the art and future perspectives
Kędziora, A., Konstanty‐Kalandyk, J., Litwinowicz, R. A., Mazur, P. K., Kapelak, B., & Piątek, J. (2022) · Advances in Interventional Cardiology · doi:10.5114/aic.2022.121124 · Cited by 6
3D printing families: laser, powder, and nozzle-based techniques
Mousavi, A., Provaggi, E., Kalaskar, D. M., & Savoji, H. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-89831-7.00009-2 · Cited by 6
A new paradigm in transplant immunology: At the crossroad of synthetic biology and biomaterials
Zhang, Z., Ding, L.-Y., Zuo, X.-L., Feng, H., & Xia, Q. (2023) · Med · doi:10.1016/j.medj.2023.05.002 · Cited by 6
Application of Human Induced Pluripotent Stem Cells for Tissue Engineered Cardiomyocyte Modelling
Katili, P. A., Karima, A. P., Azwani, W., Antarianto, R. D., & Djer, M. M. (2023) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-023-00294-1 · Cited by 6
Prospects for fabrication of artificial human tissues and organs based on 3D bioprinting
Bulgin, D. V., Kovtun, A. L., Reshetov, I. V., & Radomskaya, E. Y. (2023) · Russian Journal of Transplantology and Artificial Organs · doi:10.15825/1995-1191-2023-2-63-81 · Cited by 6
Sequential Fabrication of a Three-Layer Retina-like Structure
Shechter, Y., Cohen, R., Namestnikov, M., Shapira, A., Barak, A., Barzelay, A., & Dvir, T. (2024) · Gels · doi:10.3390/gels10050336 · Cited by 6
Self-citationBioprinting Organs—Progress Toward a Moonshot Idea
Gershlak, J. R., & Ott, H. C. (2020) · Transplantation · doi:10.1097/tp.0000000000003172 · Cited by 6
Closed-loop vasculature network design for bioprinting large, solid tissue scaffolds
Kumar, H., Dixit, K., Sharma, R. S., MacDonald, M. E., Sinha, N., & Kim, K. (2023) · Biofabrication · doi:10.1088/1758-5090/acb73c · Cited by 6
Application of biomaterials in vascularization of cardiac organoids
Liu, J., Feng, Y., Qu, P., Luo, Y., Shi, J., Ma, C., Liang, Q., Zhao, L., Li, G., Yang, B. W., et al. (2025) · iScience · doi:10.1016/j.isci.2025.113531 · Cited by 5
Chochola, V., Spustová, K., Lavický, J., Golunova, A. S., Pospíšil, J., Dvořáková, J., Kotelnikov, I., Kandra, M., Streit, L., Szklanny, A. A., et al. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c01132 · Cited by 5
Bioprinting Organs—Science or Fiction?—A Review From Students to Students
Murenu, N., Mussoni, C., Mier, M. S. A., Büttner, P., Chicaiza-Cabezas, N. A., Dai, Y. R., Faber, J., Fiedler, M., Lamberger, Z., Ng, X. J., et al. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202502103 · Cited by 5
Rational Structure Design‐Based 3D‐Printed Cardiovascular Implants
Peng, S., Hao, Y., Zhou, H., Chen, Y., & Chen, M. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202504628 · Cited by 5
Toward 4D printed functional soft tissues
Shabazz, A., Fitlin, J., Orozco-Contreras, H., Guo, S., Zhang, L. G., & Fisher, J. P. (2026) · Acta Biomaterialia · doi:10.1016/j.actbio.2026.02.035 · Cited by 5
Vu, D. T., Phan, N. A., Ngo, S. T., Phan, M. T., Truong, T., Nguyen, C. C., Phan, P. T., Phan, H., Do, T. N., & Thai, M. T. (2026) · Advanced Science · doi:10.1002/advs.202523532 · Cited by 5
Three-dimensional bioprinted organoids: advances and clinical translation
Zhang, Y., Huang, Z., Wang, B., Li, B. R., & Yang, Y. (2026) · Regenerative Biomaterials · doi:10.1093/rb/rbag142 · Cited by 6
Advances in Regenerative Medicine and Tissue Engineering
Paul, M. K., Bisht, B., & Singh, B. N. (2024) · Biomedical engineering · doi:10.5772/intechopen.1004675 · Cited by 5
Decellularized Scaffolds for Tissue Regeneration: Techniques and Applications
Biazar, E. (2024) · Biomedical engineering · doi:10.5772/intechopen.1007748 · Cited by 5
Metadata
- Authors
- Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T.
- Affiliations
- Tel Aviv University (IL)
- Corresponding author
- Dvir, Tal
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2019-04-15
- Volume
- 6
- Issue
- 11
- Pages
- 1900344-1900344
- ISSN
- 2198-3844 (ISSN-L)
- PMC
- PMC6548966
- OpenAlex
- W2937820813
- Cited by
- 1,042
- References
- 36
- Citations by year
- 2026: 59 · 2025: 106 · 2024: 126 · 2023: 187 · 2022: 157 · 2021: 212 · 2020: 142 · 2019: 51
- FWCI
- 49.47
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Advanced Science (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- European Research Council (637943)
- Israel Science Foundation (700/13)
- Ministry of Science, Technology and Space (3‐12587)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- 3D bioprinting, cardiac tissue engineering, personalized medicine, pluripotent stem cells, cardiomyocytes, endothelial cells, extracellular matrix hydrogel, bioinks, cardiac cell transplantation, drug screening, organ printing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.