The DOI matches its Crossref record; 108 of the 108 references it cites were found in a registry or an index.
Strategies toward High‐Loading Lithium–Sulfur Battery
Abstract
Lithium–sulfur (Li–S) batteries, due to the high theoretical energy density, are regarded as one of the most promising candidates for breaking the limitations of energy‐storage system based on Li‐ion batteries. Tremendous efforts have been made to meet the challenge of high‐performance Li–S batteries, in which a sulfur loading of above 5 mg cm−2 delivers an areal capacity higher than 5 mAh cm−2 without compromising specific capacity and cycling stability for practical applications. However, serious problems have been exposed during the scaling up of the sulfur loading. In this review, based on mechanistic insights into structural configuration, catalytic conversion, and interfacial engineering, the problems and corresponding strategies in the development of high‐loading Li–S batteries are highlighted and discussed, aiming at bridging the gap between fundamental research and practical cell‐level designs. Stemming from the current achievements, future directions targeting the high‐energy‐density Li–S batteries for commercialization are proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Self-citationNanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Self-citationLiquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Garnet-type solid-state fast Li ion conductors for Li batteries: critical review
Thangadurai, V., Narayanan, S., & Pinzaru, D. (2014) · Chemical Society Reviews · doi:10.1039/c4cs00020j · Cited by 1,534
Du, Z., Chen, X., Hu, W., Chuang, C., Xie, S., Hu, A., Yan, W., Kong, X., Wu, X., Ji, H., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b12973 · Cited by 1,490
Self-citationThe use of elemental sulfur as an alternative feedstock for polymeric materials
Chung, W. J., Griebel, J. J., Kim, E. T., Yoon, H., Simmonds, A. G., Ji, H. J., Dirlam, P. T., Glass, R. S., Wie, J. J., Nguyen, N. A., et al. (2013) · Nature Chemistry · doi:10.1038/nchem.1624 · Cited by 1,455
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Self-citationElectrochemical aspects of the generation of ramified metallic electrodeposits
Chazalviel, J.-N. (1990) · Physical Review A · doi:10.1103/physreva.42.7355 · Cited by 1,402
Thickness-independent capacitance of vertically aligned liquid-crystalline MXenes
Xia, Y., Mathis, T. S., Zhao, M.-Q., Anasori, B., Dang, A., Zhou, Z., Cho, H., Gogotsi, Y., & Yang, S. (2018) · Nature · doi:10.1038/s41586-018-0109-z · Cited by 1,310
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
A review of rechargeable batteries for portable electronic devices
Liang, Y., Zhao, C., Yuan, H., Chen, Y., Zhang, W., Huang, J., Yu, D., Liu, Y., Titirici, M., Chueh, Y., et al. (2019) · InfoMat · doi:10.1002/inf2.12000 · Cited by 1,174
Self-citationZhou, G., Paek, E., Hwang, G. S., & Manthiram, A. (2015) · Nature Communications · doi:10.1038/ncomms8760 · Cited by 1,058
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Self-citationLiu, D., Zhang, C., Zhou, G., Lv, W., Ling, G., Zhi, L., & Yang, Q. (2018) · Advanced Science · doi:10.1002/advs.201700270 · Cited by 956
Barchasz, C., Molton, F., Duboc, C., Leprêtre, J.-C., Patoux, S., & Alloin, F. (2012) · Analytical Chemistry · doi:10.1021/ac2032244 · Cited by 946
Dendritic growth mechanisms in lithium/polymer cells
Brissot, C., Rosso, M., Chazalviel, J.-N., & Lascaud, S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00242-0 · Cited by 945
A review of lithium deposition in lithium-ion and lithium metal secondary batteries
Li, Z., Huang, J., Yann Liaw, B., Metzler, V., & Zhang, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.099 · Cited by 938
Self-citationLithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Carbon–sulfur composites for Li–S batteries: status and prospects
Wang, D.-W., Zeng, Q., Zhou, G., Yin, L., Li, F., Cheng, H.-M., Gentle, I. R., & Lu, G. Q. M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11045a · Cited by 816
Pang, Q., Tang, J., Huang, H., Liang, X., Hart, C., Tam, K. C., & Nazar, L. F. (2015) · Advanced Materials · doi:10.1002/adma.201502467 · Cited by 780
Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode
Bieker, G., Winter, M., & Bieker, P. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05865h · Cited by 777
Bao, W., Liu, L., Wang, C., Choi, S., Wang, D., & Wang, G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702485 · Cited by 745
Lithium-Sulfur Batteries: Attaining the Critical Metrics
Bhargav, A., He, J., Gupta, A., & Manthiram, A. (2020) · Joule · doi:10.1016/j.joule.2020.01.001 · Cited by 736
Elastic Properties of the Solid Electrolyte Li7La3Zr2O12(LLZO)
Yu, S., Schmidt, R. D., Garcia-Mendez, R., Herbert, E., Dudney, N. J., Wolfenstine, J. B., Sakamoto, J., & Siegel, D. J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03854 · Cited by 662
Hagen, M., Hanselmann, D., Ahlbrecht, K., Maça, R., Gerber, D., & Tübke, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401986 · Cited by 636
Yuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802768 · Cited by 626
Self-citationHe, J., Hartmann, G., Lee, M., Hwang, G. S., Chen, Y., & Manthiram, A. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03252a · Cited by 589
A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries
Zhou, G., Li, L., Ma, C., Wang, S., Shi, Y., Koratkar, N., Ren, W., Li, F., & Cheng, H.-M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.025 · Cited by 570
Multi‐Functional Layered WS2 Nanosheets for Enhancing the Performance of Lithium–Sulfur Batteries
Lei, T., Chen, W., Huang, J., Yan, C., Sun, H., Wang, C., Zhang, W., Li, Y., & Xiong, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601843 · Cited by 548
Self-citationSong, Y., Zhao, W., Kong, L., Zhang, L., Zhu, X., Shao, Y., Ding, F., Zhang, Q., Sun, J., & Liu, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01402g · Cited by 539
3D Interconnected Electrode Materials with Ultrahigh Areal Sulfur Loading for Li–S Batteries
Fang, R., Zhao, S., Hou, P., Cheng, M., Wang, S., Cheng, H., Liu, C., & Li, F. (2016) · Advanced Materials · doi:10.1002/adma.201506014 · Cited by 532
He, J., Luo, L., Chen, Y., & Manthiram, A. (2017) · Advanced Materials · doi:10.1002/adma.201702707 · Cited by 521
Mao, Y., Li, G., Guo, Y., Li, Z., Liang, C., Peng, X., & Lin, Z. (2017) · Nature Communications · doi:10.1038/ncomms14628 · Cited by 518
Progress in Mechanistic Understanding and Characterization Techniques of Li‐S Batteries
Xu, R., Lu, J., & Amine, K. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500408 · Cited by 507
Lei, T., Chen, W., Lv, W., Huang, J., Zhu, J., Chu, J., Yan, C., Wu, C., Yan, Y., He, W., et al. (2018) · Joule · doi:10.1016/j.joule.2018.07.022 · Cited by 493
Self-citationA review on the status and challenges of electrocatalysts in lithium-sulfur batteries
He, J., & Manthiram, A. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.04.038 · Cited by 479
Stabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement
Liu, W., Lin, D., Pei, A., & Cui, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08730 · Cited by 455
Carbon nanomaterials for advanced lithium sulfur batteries
Xu, Z.-L., Kim, J.-K., & Kang, K. (2018) · Nano Today · doi:10.1016/j.nantod.2018.02.006 · Cited by 454
Li, G., Liu, Z., Huang, Q., Gao, Y., Regula, M., Wang, D., Chen, L.-Q., & Wang, D. (2018) · Nature Energy · doi:10.1038/s41560-018-0276-z · Cited by 444
Xu, J., Zhang, W., Fan, H., Cheng, F., Su, D., & Wang, G. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.046 · Cited by 422
A Comprehensive Understanding of Lithium–Sulfur Battery Technology
Li, T., Bai, X., Gulzar, U., Bai, Y., Capiglia, C., Deng, W., Zhou, X., Liu, Z., Feng, Z., & Proietti Zaccaria, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901730 · Cited by 422
Advances in Polar Materials for Lithium–Sulfur Batteries
Wang, H., Zhang, W., Xu, J., & Guo, Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707520 · Cited by 412
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Xu, Z.-L., Lin, S., Onofrio, N., Zhou, L., Shi, F., Lu, W., Kang, K., Zhang, Q., & Lau, S. P. (2018) · Nature Communications · doi:10.1038/s41467-018-06629-9 · Cited by 391
Li, C., Liu, S., Shi, C., Liang, G., Lu, Z., Fu, R., & Wu, D. (2019) · Nature Communications · doi:10.1038/s41467-019-09211-z · Cited by 384
Chen, W., Qian, T., Xiong, J., Xu, N., Liu, X., Liu, J., Zhou, J., Shen, X., Yang, T., Chen, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605160 · Cited by 382
Self-citationA Mathematical Model for a Lithium–Sulfur Cell
Kumaresan, K., Mikhaylik, Y., & White, R. E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2937304 · Cited by 375
Phosphorene as a Polysulfide Immobilizer and Catalyst in High‐Performance Lithium–Sulfur Batteries
Li, L., Chen, L., Mukherjee, S., Gao, J., Sun, H., Liu, Z., Ma, X., Gupta, T., Singh, C. V., Ren, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201602734 · Cited by 364
Miao, R., Yang, J., Feng, X., Jia, H., Wang, J., & Nuli, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.011 · Cited by 361
Nanomaterials: Science and applications in the lithium–sulfur battery
Ma, L., Hendrickson, K. E., Wei, S., & Archer, L. A. (2015) · Nano Today · doi:10.1016/j.nantod.2015.04.011 · Cited by 359
Designing Safe Electrolyte Systems for a High‐Stability Lithium–Sulfur Battery
Chen, W., Lei, T., Wu, C., Deng, M., Gong, C., Hu, K., Ma, Y., Dai, L., Lv, W., He, W., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702348 · Cited by 356
Self-citationLi, X., & Wang, J. (2019) · InfoMat · doi:10.1002/inf2.12040 · Cited by 353
Exploiting a robust biopolymer network binder for an ultrahigh-areal-capacity Li–S battery
Liu, J., Galpaya, D. G. D., Yan, L., Sun, M., Lin, Z., Yan, C., Liang, C., & Zhang, S. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03033e · Cited by 347
Self-citationLi, Z., He, Q., Xu, X., Zhao, Y., Liu, X., Zhou, C., Ai, D., Xia, L., & Mai, L. (2018) · Advanced Materials · doi:10.1002/adma.201804089 · Cited by 338
Qie, L., Zu, C., & Manthiram, A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502459 · Cited by 321
A Comprehensive Approach toward Stable Lithium–Sulfur Batteries with High Volumetric Energy Density
Pang, Q., Liang, X., Kwok, C. Y., Kulisch, J., & Nazar, L. F. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601630 · Cited by 321
Pang, Q., Kwok, C. Y., Kundu, D., Liang, X., & Nazar, L. F. (2019) · Joule · doi:10.1016/j.joule.2018.09.024 · Cited by 317
Wang, Z., Shen, J., Liu, J., Xu, X., Liu, Z., Hu, R., Yang, L., Feng, Y., Liu, J., Shi, Z., et al. (2019) · Advanced Materials · doi:10.1002/adma.201902228 · Cited by 309
Rana, M., Ahad, S. A., Li, M., Luo, B., Wang, L., Gentle, I., & Knibbe, R. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.12.024 · Cited by 301
Song, J., Guo, X., Zhang, J., Chen, Y., Zhang, C., Luo, L., Wang, F., & Wang, G. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00212j · Cited by 301
He, Y., Chang, Z., Wu, S., Qiao, Y., Bai, S., Jiang, K., He, P., & Zhou, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802130 · Cited by 295
A Facile Layer‐by‐Layer Approach for High‐Areal‐Capacity Sulfur Cathodes
Qie, L., & Manthiram, A. (2015) · Advanced Materials · doi:10.1002/adma.201405689 · Cited by 290
Chung, S., Chang, C., & Manthiram, A. (2016) · ACS Nano · doi:10.1021/acsnano.6b06369 · Cited by 282
Chung, S., Han, P., Singhal, R., Kalra, V., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500738 · Cited by 280
Recent research progresses in ether‐ and ester‐based electrolytes for sodium‐ion batteries
Lin, Z., Xia, Q., Wang, W., Li, W., & Chou, S. (2019) · InfoMat · doi:10.1002/inf2.12023 · Cited by 265
Chen, W., Lei, T., Lv, W., Hu, Y., Yan, Y., Jiao, Y., He, W., Li, Z., Yan, C., & Xiong, J. (2018) · Advanced Materials · doi:10.1002/adma.201804084 · Cited by 251
Self-citationZhang, H., Zou, M., Zhao, W., Wang, Y., Chen, Y., Wu, Y., Dai, L., & Cao, A. (2019) · ACS Nano · doi:10.1021/acsnano.8b07843 · Cited by 230
Eroglu, D., Zavadil, K. R., & Gallagher, K. G. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0611506jes · Cited by 224
A new ether-based electrolyte for dendrite-free lithium-metal based rechargeable batteries
Miao, R., Yang, J., Xu, Z., Wang, J., Nuli, Y., & Sun, L. (2016) · Scientific Reports · doi:10.1038/srep21771 · Cited by 221
Direct Observation of Sulfur Radicals as Reaction Media in Lithium Sulfur Batteries
Wang, Q., Zheng, J., Walter, É., Pan, H., Lv, D., Zuo, P., Chen, H., Deng, Z. D., Liaw, B. Y., Yu, X., et al. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0851503jes · Cited by 218
Park, J., Jeong, J., Lee, Y., Oh, M., Ryou, M., & Lee, Y. M. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600140 · Cited by 210
Cathode-Supported All-Solid-State Lithium–Sulfur Batteries with High Cell-Level Energy Density
Xu, R., Yue, J., Liu, S., Tu, J., Han, F., Liu, P., & Wang, C. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00430 · Cited by 208
Shi, H., Lv, W., Zhang, C., Wang, D., Ling, G., He, Y., Kang, F., & Yang, Q. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800508 · Cited by 205
Assary, R. S., Curtiss, L. A., & Moore, J. S. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5015466 · Cited by 190
Li, X., Ding, K., Gao, B., Li, Q., Li, Y., Fu, J., Zhang, X., Chu, P. K., & Huo, K. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.09.018 · Cited by 188
Zhou, G., Liu, K., Fan, Y., Yuan, M., Liu, B., Liu, W., Shi, F., Liu, Y., Chen, W., Lopez, J., et al. (2018) · ACS Central Science · doi:10.1021/acscentsci.7b00569 · Cited by 187
Self-citationLei, T., Chen, W., Hu, Y., Lv, W., Lv, X., Yan, Y., Huang, J., Jiao, Y., Chu, J., Yan, C., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802441 · Cited by 180
Self-citationHe, J., Chen, Y., & Manthiram, A. (2018) · iScience · doi:10.1016/j.isci.2018.05.005 · Cited by 179
Gong, Y., Fu, K., Xu, S., Dai, J., Hamann, T. R., Zhang, L., Hitz, G. T., Fu, Z., Ma, Z., McOwen, D. W., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.01.001 · Cited by 175
Lang, S.-Y., Xiao, R.-J., Gu, L., Guo, Y.-G., Wen, R., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b02057 · Cited by 168
Sulfur Hosts against the Shuttle Effect
Wang, Y., Huang, X., Zhang, S., & Hou, Y. (2018) · Small Methods · doi:10.1002/smtd.201700345 · Cited by 168
Hollow cobalt sulfide polyhedra-enabled long-life, high areal-capacity lithium-sulfur batteries
Xu, H., & Manthiram, A. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.007 · Cited by 162
Luo, L., Chung, S., Asl, H. Y., & Manthiram, A. (2018) · Advanced Materials · doi:10.1002/adma.201804149 · Cited by 153
Wang, M., Fan, L., Tian, D., Wu, X., Qiu, Y., Zhao, C., Guan, B., Wang, Y., Zhang, N., & Sun, K. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00856 · Cited by 149
Two‐dimensional heterostructure promoted infrared photodetection devices
Rao, G., Wang, X., Wang, Y., Wangyang, P., Yan, C., Chu, J., Xue, L., Gong, C., Huang, J., Xiong, J., et al. (2019) · InfoMat · doi:10.1002/inf2.12018 · Cited by 149
Self-citationChen, X., Xu, Y., Du, F., & Wang, Y. (2019) · Small Methods · doi:10.1002/smtd.201900338 · Cited by 146
Hu, Y., Chen, W., Lei, T., Zhou, B., Jiao, Y., Yan, Y., Du, X., Huang, J., Wu, C., Wang, X., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802955 · Cited by 136
Self-citationInterface Design and Development of Coating Materials in Lithium–Sulfur Batteries
Li, X., & Sun, X. A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801323 · Cited by 132
Fu, X., Scudiero, L., & Zhong, W. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta11384j · Cited by 128
Advances in the development of power supplies for the Internet of Everything
Fan, X., Liu, X., Hu, W., Zhong, C. M., & Lu, J. B. (2019) · InfoMat · doi:10.1002/inf2.12016 · Cited by 114
Song, J., Lee, H., Choo, M., Park, J.-K., & Kim, H. (2015) · Scientific Reports · doi:10.1038/srep14458 · Cited by 103
Hu, H., Zhao, B., Cheng, H., Dai, S., Kane, N., Yu, Y., & Liu, M. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.12.092 · Cited by 83
Yang, G. Q., Tan, J., Jin, H., Kim, Y. H., Yang, X., Son, D. H., Ahn, S.-J., Zhou, H.-C. “., & Yu, C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800595 · Cited by 68
Tian, J., Jiang, T., Wang, M., Hu, Z., Zhu, X., Zhang, L., Qian, T., & Yan, C. (2019) · Small Methods · doi:10.1002/smtd.201900467 · Cited by 63
Self-citationAll‐Solid‐State Lithium–Sulfur Battery with High Energy and Power Densities at the Cell Level
Nagata, H., & Chikusa, Y. (2015) · Energy Technology · doi:10.1002/ente.201500297 · Cited by 48
Ding, B., Fan, Z., Lin, Q., Wang, J., Chang, Z., Li, T., Henzie, J., Kim, J., Dou, H., Zhang, X., et al. (2019) · Small Methods · doi:10.1002/smtd.201900277 · Cited by 48
Zhao, M., Peng, H., Zhang, Z., Li, B., Chen, X., Xie, J., Chen, X., Wei, J., Zhang, Q., & Huang, J. (2018) · Angewandte Chemie · doi:10.1002/ange.201812062 · Cited by 46
Self-citationA linear molecule sulfur-rich organic cathode material for high performance lithium–sulfur batteries
Xu, H., Shi, Y., Yang, S., & Li, B. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.05.022 · Cited by 38
Yu, R., Chung, S., Chen, C. H., et al. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.12.025 · Cited by 21
Cited by
A Perspective toward Practical Lithium–Sulfur Batteries
Zhao, M., Li, B.-Q., Zhang, X.-Q., Huang, J.-Q., & Zhang, Q. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00449 · Cited by 858
Self-citationAn artificial hybrid interphase for an ultrahigh-rate and practical lithium metal anode
Hu, A., Chen, W., Du, X., Hu, Y., Lei, T., Wang, H., Xue, L., Li, Y., Sun, H., Yan, Y., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00508a · Cited by 716
Self-citationNg, S., Lau, M. Y. L., & Ong, W. (2021) · Advanced Materials · doi:10.1002/adma.202008654 · Cited by 404
A Review of Heteroatom Doped Materials for Advanced Lithium–Sulfur Batteries
Wang, J., & Han, W. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202107166 · Cited by 351
Status and Prospects of MXene‐Based Lithium–Sulfur Batteries
Zhao, Q., Zhu, Q., Liu, Y., & Xu, B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100457 · Cited by 334
Metadata
- Authors
- Hu, Y., Chen, W., Lei, T., Jiao, Y., Huang, J., Hu, A., Gong, C., Yan, C., Wang, X., & Xiong, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2020-03-20
- Volume
- 10
- Issue
- 17
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3011981481
- Cited by
- 402
- References
- 108
- FWCI
- 22.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.