The DOI matches its Crossref record; 107 of the 107 references it cites were found in a registry or an index.
Inhibition of Polysulfide Shuttles in Li–S Batteries: Modified Separators and Solid‐State Electrolytes
Abstract
Lithium–sulfur (Li–S) batteries are one of the most promising next‐generation energy storage systems due to their ultrahigh theoretical specific capacity. However, their practical applications are seriously hindered by some inevitable disadvantages such as the insulative nature of sulfur and Li 2 S, volume expansion of the cathode, the shuttle effect of polysulfides, and the growth of lithium dendrites on the anode. Of these, the polysulfide shuttle effect is one of the most critical issues causing the irreversible loss of active materials and rapid capacity degradation of batteries. Herein, modified separators with functional coatings inhibiting the migration of polysulfides are enumerated based on three effects toward polysulfides: the adsorption effect, separation effect, and catalytic effect. To solve the shuttle effect problem, researchers have replaced liquid electrolytes with solid‐state electrolytes. In this review, solid‐state electrolytes for lithium–sulfur batteries are grouped into three categories: inorganic solid electrolytes, solid polymer electrolytes, and composite solid electrolytes. Challenges and perspectives regarding the development of an optimized strategy to inhibit the polysulfide shuttle for enhancing cycle stability in lithium–sulfur batteries are also proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Design principles for solid-state lithium superionic conductors
Wang, Y., Richards, W. D., Ong, S. P., Miara, L. J., Kim, J. C., Mo, Y., & Ceder, G. (2015) · Nature Materials · doi:10.1038/nmat4369 · Cited by 1,485
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Review on gel polymer electrolytes for lithium batteries
Manuel Stephan, A. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.09.017 · Cited by 1,422
Inorganic solid Li ion conductors: An overview
Knauth, P. (2009) · Solid State Ionics · doi:10.1016/j.ssi.2009.03.022 · Cited by 1,170
Practical Challenges and Future Perspectives of All-Solid-State Lithium-Metal Batteries
Xia, S., Wu, X., Zhang, Z., Cui, Y., & Liu, W. (2019) · Chem · doi:10.1016/j.chempr.2018.11.013 · Cited by 942
MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries
Ghazi, Z. A., He, X., Khattak, A. M., Khan, N. A., Liang, B., Iqbal, A., Wang, J., Sin, H., Li, L., & Tang, Z. (2017) · Advanced Materials · doi:10.1002/adma.201606817 · Cited by 902
New, Highly Ion‐Conductive Crystals Precipitated from Li2S–P2S5 Glasses
Mizuno, F., Hayashi, A., Tadanaga, K., & Tatsumisago, M. (2005) · Advanced Materials · doi:10.1002/adma.200401286 · Cited by 872
Characterization and performance evaluation of lithium-ion battery separators
Lagadec, M. F., Zahn, R., & Wood, V. (2018) · Nature Energy · doi:10.1038/s41560-018-0295-9 · Cited by 812
Huang, J.-Q., Zhuang, T.-Z., Zhang, Q., Peng, H.-J., Chen, C.-M., & Wei, F. (2015) · ACS Nano · doi:10.1021/nn507178a · Cited by 809
First Principles Study of the Li10GeP2S12 Lithium Super Ionic Conductor Material
Mo, Y., Ong, S. P., & Ceder, G. (2012) · Chemistry of Materials · doi:10.1021/cm203303y · Cited by 805
Chen, R., Qu, W., Guo, X., Li, L., & Wu, F. (2016) · Materials Horizons · doi:10.1039/c6mh00218h · Cited by 797
Novel Fast Lithium Ion Conduction in Garnet‐Type Li 5 La 3 M 2 O 12 (M = Nb, Ta)
Thangadurai, V., Kaack, H., & Weppner, W. J. F. (2003) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2003.tb03318.x · Cited by 786
Su, Y.-S., & Manthiram, A. (2012) · Chemical Communications · doi:10.1039/c2cc33945e · Cited by 755
Zheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Self-citationZhang, Q., Cao, D., Ma, Y., Natan, A., Aurora, P., & Zhu, H. (2019) · Advanced Materials · doi:10.1002/adma.201901131 · Cited by 709
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Recent Advances in Electrolytes for Lithium–Sulfur Batteries
Zhang, S., Ueno, K., Dokko, K., & Watanabe, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500117 · Cited by 616
Mesoporous Titanium Nitride‐Enabled Highly Stable Lithium‐Sulfur Batteries
Cui, Z., Zu, C., Zhou, W., Manthiram, A., & Goodenough, J. B. (2016) · Advanced Materials · doi:10.1002/adma.201601382 · Cited by 611
Wan, C., & Bowen, C. R. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09590a · Cited by 589
He, J., Chen, Y., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00893k · Cited by 565
Crystal structure and ionic conductivity of Li14Zn(GeO4)4 and other new Li+ superionic conductors
Hong, H. Y.-P. (1978) · Materials Research Bulletin · doi:10.1016/0025-5408(78)90075-2 · Cited by 553
Zhang, X., Wang, S., Xue, C., Xin, C., Lin, Y., Shen, Y., Li, L., & Nan, C. (2019) · Advanced Materials · doi:10.1002/adma.201806082 · Cited by 551
Composite solid electrolytes for all-solid-state lithium batteries
Dirican, M., Yan, C., Zhu, P., & Zhang, X. (2018) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2018.10.004 · Cited by 549
Lim, W., Kim, S., Jo, C., & Lee, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201902413 · Cited by 535
Yang, X., Luo, J., & Sun, X. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00635d · Cited by 520
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Novel Fast Lithium Ion Conduction in Garnet‐Type Li5La3M2O12 (M: Nb, Ta).
Thangadurai, V., Kaack, H., & Weppner, W. J. F. (2003) · ChemInform · doi:10.1002/chin.200327009 · Cited by 510
Structural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
Lei, T., Chen, W., Lv, W., Huang, J., Zhu, J., Chu, J., Yan, C., Wu, C., Yan, Y., He, W., et al. (2018) · Joule · doi:10.1016/j.joule.2018.07.022 · Cited by 493
From lithium to sodium: Cell chemistry of room temperature sodium–air and sodium–sulfur batteries
Adelhelm, P., Hartmann, P., Bender, C. L., Busche, M., Eufinger, C., & Janek, J. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.105 · Cited by 478
Li+‐Conductive Solid Polymer Electrolytes with Liquid‐Like Conductivity
Abraham, K. M., & Alamgir, M. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086749 · Cited by 457
Electrochemical performance of lithium/sulfur cells with three different polymer electrolytes
Marmorstein, D., Yu, T. H., Striebel, K. A., McLarnon, F. R., Hou, J., & Cairns, E. J. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00432-8 · Cited by 451
Recent advances in shuttle effect inhibition for lithium sulfur batteries
Ren, W., Ma, W., Zhang, S., & Tang, B. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.022 · Cited by 434
Rational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
A Comprehensive Understanding of Lithium–Sulfur Battery Technology
Li, T., Bai, X., Gulzar, U., Bai, Y., Capiglia, C., Deng, W., Zhou, X., Liu, Z., Feng, Z., & Proietti Zaccaria, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901730 · Cited by 422
Al2O3-coated porous separator for enhanced electrochemical performance of lithium sulfur batteries
Zhang, Z., Lai, Y., Zhang, Z., Zhang, K., & Li, J. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.02.077 · Cited by 418
Recent Advances in Hollow Porous Carbon Materials for Lithium–Sulfur Batteries
Fu, A., Wang, C., Pei, F., Cui, J., Fang, X., & Zheng, N. (2019) · Small · doi:10.1002/smll.201804786 · Cited by 417
Hassoun, J., & Scrosati, B. (2010) · Advanced Materials · doi:10.1002/adma.201002584 · Cited by 415
High-Performance Li–S Batteries with an Ultra-lightweight MWCNT-Coated Separator
Chung, S.-H., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5006913 · Cited by 393
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201402893 · Cited by 364
Progress in nitrile-based polymer electrolytes for high performance lithium batteries
Hu, P., Chai, J., Duan, Y., Liu, Z., Cui, G., & Chen, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02907h · Cited by 359
Designing Safe Electrolyte Systems for a High‐Stability Lithium–Sulfur Battery
Chen, W., Lei, T., Wu, C., Deng, M., Gong, C., Hu, K., Ma, Y., Dai, L., Lv, W., He, W., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702348 · Cited by 356
Eshetu, G. G., Judez, X., Li, C., Martinez-Ibañez, M., Gracia, I., Bondarchuk, O., Carrasco, J., Rodriguez-Martinez, L. M., Zhang, H., & Armand, M. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04612 · Cited by 351
Peng, H., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500268 · Cited by 348
Park, J., Yu, B., Park, J. S., Choi, J. W., Kim, C., Sung, Y., & Goodenough, J. B. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602567 · Cited by 348
Zhuang, T., Huang, J., Peng, H., He, L., Cheng, X., Chen, C., & Zhang, Q. (2016) · Small · doi:10.1002/smll.201503133 · Cited by 346
Rechargeable Solid‐State Li–Air and Li–S Batteries: Materials, Construction, and Challenges
Liu, Y., He, P., & Zhou, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701602 · Cited by 315
All-solid-state Li/S batteries with highly conductive glass–ceramic electrolytes
Hayashi, A., Ohtomo, T., Mizuno, F., Tadanaga, K., & Tatsumisago, M. (2003) · Electrochemistry Communications · doi:10.1016/s1388-2481(03)00167-x · Cited by 312
Mechanistic understanding of the role separators playing in advanced lithium‐sulfur batteries
Wei, Z., Ren, Y., Sokolowski, J., Zhu, X., & Wu, G. (2020) · InfoMat · doi:10.1002/inf2.12097 · Cited by 302
Hong, X.-J., Song, C.-L., Yang, Y., Tan, H.-C., Li, G.-H., Cai, Y.-P., & Wang, H. (2019) · ACS Nano · doi:10.1021/acsnano.8b08155 · Cited by 301
Progress and Perspective of Solid‐State Lithium–Sulfur Batteries
Lei, D., Shi, K., Ye, H., Wan, Z., Wang, Y., Shen, L., Li, B., Yang, Q., Kang, F., & He, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707570 · Cited by 282
Chung, S., Han, P., Singhal, R., Kalra, V., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500738 · Cited by 280
A review on separators for lithium sulfur battery: Progress and prospects
Deng, N., Kang, W., Liu, Y., Ju, J., Wu, D., Li, L., Hassan, B. S., & Cheng, B. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.044 · Cited by 267
Chen, L., & Fan, L. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.03.015 · Cited by 259
Liang, X., Wen, Z., Liu, Y., Zhang, H., Huang, L., & Jin, J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.12.052 · Cited by 257
A high performance lithium-ion sulfur battery based on a Li2S cathode using a dual-phase electrolyte
Wang, L., Wang, Y., & Xia, Y. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00058k · Cited by 247
Yamada, T., Ito, S., Omoda, R., Watanabe, T., Aihara, Y., Agostini, M., Ulissi, U., Hassoun, J., & Scrosati, B. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0441504jes · Cited by 217
Wu, J., Zeng, H., Li, X., Xiao, X. H., Liao, Y., Xue, Z., Ye, Y., & Xie, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802430 · Cited by 213
Rana, M., Li, M., Huang, X., Luo, B., Gentle, I., & Knibbe, R. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta12066h · Cited by 208
Cathode-Supported All-Solid-State Lithium–Sulfur Batteries with High Cell-Level Energy Density
Xu, R., Yue, J., Liu, S., Tu, J., Han, F., Liu, P., & Wang, C. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00430 · Cited by 208
Xu, R.-C., Xia, X.-H., Wang, X.-L., Xia, Y., & Tu, J.-P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10142a · Cited by 207
Judez, X., Zhang, H., Li, C., González-Marcos, J. A., Zhou, Z., Armand, M., & Rodriguez-Martinez, L. M. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b00593 · Cited by 203
Cellulose-Based Porous Membrane for Suppressing Li Dendrite Formation in Lithium–Sulfur Battery
Yu, B.-C., Park, K., Jang, J.-H., & Goodenough, J. B. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00209 · Cited by 192
Shao, H., Wang, W., Zhang, H., Wang, A., Chen, X., & Huang, Y. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.067 · Cited by 192
Single-Atom Coated Separator for Robust Lithium–Sulfur Batteries
Zhang, K., Chen, Z., Ning, R., Xi, S., Tang, W., Du, Y., Liu, C., Ren, Z., Chi, X., Bai, M., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b05628 · Cited by 192
Nanostructured cathode materials for lithium–sulfur batteries: progress, challenges and perspectives
Rehman, S., Khan, K., Zhao, Y., & Hou, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10111a · Cited by 189
Jeong, S. S., Lim, Y. T., Choi, Y. J., Cho, G. B., Kim, K. W., Ahn, H. J., & Cho, K. K. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.108 · Cited by 184
Deng, C., Wang, Z., Wang, S., & Yu, J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00535h · Cited by 184
Cross-Linked Solid Polymer Electrolyte for All-Solid-State Rechargeable Lithium Batteries
Ben youcef, H., Garcia-Calvo, O., Lago, N., Devaraj, S., & Armand, M. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.10.122 · Cited by 181
Liang, J., Li, X., Zhao, Y., Goncharova, L. V., Wang, G., Adair, K. R., Wang, C., Li, R., Zhu, Y., Qian, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201804684 · Cited by 181
A Sandwich PVDF/HEC/PVDF Gel Polymer Electrolyte for Lithium Ion Battery
Zhang, M. Y., Li, M. X., Chang, Z., Wang, Y., Gao, J., Zhu, Y., Wu, Y., & Huang, W. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.05.154 · Cited by 180
Xu, R.-C., Xia, X.-H., Li, S.-H., Zhang, S.-Z., Wang, X.-L., & Tu, J.-P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01147d · Cited by 167
Self-citationLiu, Y., Xu, B., Zhang, W., Li, L., Lin, Y., & Nan, C. (2020) · Small · doi:10.1002/smll.201902813 · Cited by 167
Self-citationZhang, C., Lin, Y., & Liu, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01037c · Cited by 159
Chang, C., Chung, S., & Manthiram, A. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05053g · Cited by 150
Jeong, Y. C., Kim, J. H., Kwon, S. H., Oh, J. Y., Park, J., Jung, Y., Lee, S. G., Yang, S. J., & Park, C. R. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta08153g · Cited by 133
A High‐Performance Li–B–H Electrolyte for All‐Solid‐State Li Batteries
Lu, F., Pang, Y., Zhu, M., Han, F., Yang, J., Fang, F., Sun, D., Zheng, S., & Wang, C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201809219 · Cited by 133
Zeng, P., Huang, L., Zhang, X., Zhang, R., Wu, L., & Chen, Y. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.05.096 · Cited by 128
Ren, W., Cheng, J., Ou, H., Huang, C., Titirici, M., & Wang, X. (2019) · ChemSusChem · doi:10.1002/cssc.201901011 · Cited by 128
Moorthy, B., Kwon, S., Kim, J., Ragupathy, P., Lee, H. M., & Kim, D. K. (2018) · Nanoscale Horizons · doi:10.1039/c8nh00172c · Cited by 115
Fan, Y., Niu, Z., Zhang, F., Zhang, R., Zhao, Y., & Lu, G. M. (2019) · ACS Omega · doi:10.1021/acsomega.9b00884 · Cited by 108
Umeshbabu, E., Zheng, B., Zhu, J., Wang, H., Li, Y., & Yang, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b03726 · Cited by 106
A new approach for recycling waste rubber products in Li–S batteries
Yu, B., Jung, J., Park, K., & Goodenough, J. B. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02770a · Cited by 100
Ponraj, R., Kannan, A. G., Ahn, J. H., Lee, J. H., Kang, J., Han, B., & Kim, D. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10641 · Cited by 99
Guo, P., Sun, K., Shang, X., Liu, D., Wang, Y., Liu, Q., Fu, Y., & He, D. (2019) · Small · doi:10.1002/smll.201902363 · Cited by 98
Chen, G., Song, X., Wang, S., Wang, Y., Gao, T., Ding, L., & Wang, H. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.11.026 · Cited by 90
Han, P., & Manthiram, A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.10.005 · Cited by 89
Wang, T., Kretschmer, K., Choi, S., Pang, H., Xue, H., & Wang, G. (2017) · Small Methods · doi:10.1002/smtd.201700089 · Cited by 87
Zhu, L. S., You, L., Zhu, P., Shen, X., Yang, L., & Xiao, K. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02322 · Cited by 86
Recent advances in functional modification of separators in lithium–sulfur batteries
He, Y., Qiao, Y., & Zhou, H. S. (2018) · Dalton Transactions · doi:10.1039/c7dt04717g · Cited by 67
2 D Materials for Inhibiting the Shuttle Effect in Advanced Lithium–Sulfur Batteries
Ali, T., & Yan, C. (2019) · ChemSusChem · doi:10.1002/cssc.201901981 · Cited by 67
Shen, Y.-B., Zeng, F., Zhou, X.-Y., Wang, A., Wang, W.-K., Yuan, N., & Ding, J.-N. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.01.016 · Cited by 66
Zuo, X., Zhen, M., & Wang, C. (2019) · Nano Research · doi:10.1007/s12274-019-2298-7 · Cited by 62
Enhancing Fast Lithium Ion Conduction in Li4GeO4–Li3PO4 Solid Electrolytes
Zhao, G., Suzuki, K., Yonemura, M., Hirayama, M., & Kanno, R. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01152 · Cited by 50
Kaisar, N., Abbas, S. A., Ding, J., Chen, H., Pao, C., Boopathi, K. M., Mohapatra, A., Chen, Y., Wu, S. H., Fang, J., et al. (2019) · Nanoscale · doi:10.1039/c8nr08262f · Cited by 46
Protecting lithium anode with LiNO3/Al2O3/PVDF-coated separator for lithium-sulfur batteries
Guan, Y., Wang, A., Liu, S., Li, Q., Wang, W., & Huang, Y. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.06.235 · Cited by 44
Zhu, L. S., Jiang, H., Yang, Q., Yao, S., Shen, X., & Tu, F. (2019) · Energy Technology · doi:10.1002/ente.201900752 · Cited by 24
Nguyen, J., Fleutot, B., & Janot, R. (2017) · Solid State Ionics · doi:10.1016/j.ssi.2017.11.033 · Cited by 22
Cited by
Xiao, P., Yun, X., Chen, Y., Guo, X., Gao, P., Zhou, G., & Zheng, C. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00151b · Cited by 443
Status and Prospects of MXene‐Based Lithium–Sulfur Batteries
Zhao, Q., Zhu, Q., Liu, Y., & Xu, B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100457 · Cited by 334
Interface engineering toward stable lithium–sulfur batteries
Guo, Y., Niu, Q., Pei, F., Wang, Q., Zhang, Y., Du, L., Zhang, Y., Zhang, Y., Zhang, Y., Fan, L., et al. (2024) · Energy & Environmental Science · doi:10.1039/d3ee04183b · Cited by 322
Self-citationHu, B., Xu, J., Fan, Z., Xu, C., Han, S., Zhang, J., Ma, L., Ding, B., Zhuang, Z., Kang, Q., et al. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202203540 · Cited by 282
Metadata
- Authors
- Li, S., Zhang, W., Zheng, J., Lv, M., Song, H., & Du, L.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2020-05-19
- Volume
- 11
- Issue
- 2
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3026896748
- Cited by
- 373
- References
- 107
- FWCI
- 17.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.