The DOI matches its Crossref record; 112 of the 112 references it cites were found in a registry or an index.
Electrolyte Additives for Lithium Metal Anodes and Rechargeable Lithium Metal Batteries: Progress and Perspectives
Abstract
Lithium metal (Li 0) rechargeable batteries (LMBs), such as systems with a Li 0 anode and intercalation and/or conversion type cathode, lithium‐sulfur (Li‐S), and lithium‐oxygen (O 2)/air (Li‐O 2/air) batteries, are becoming increasingly important for electrifying the modern transportation system, with the aim of sustainable mobility. Although some rechargeable LMBs (e.g. Li 0/LiFePO 4 batteries from Bolloré Bluecar, Li‐S batteries from OXIS Energy and Sion Power) are already commercially viable in niche applications, their large‐scale deployment is hampered by a number of formidable challenges, including growth of lithium dendrites, electrolyte instability towards high voltage intercalation‐type cathodes, the poor electronic and ionic conductivities of sulfur (S 8) and O 2, as well as their corresponding reduction products (e.g. Li 2 S and Li 2 O), dissolution, and shuttling of polysulfide (PS) intermediates. This leads to a short lifecycle, low coulombic/energy efficiency, poor safety, and a high self‐discharge rate. The use of electrolyte additives is considered one of the most economical and effective approaches for circumventing these problems. This Review gives an overview of the various functional additives that are being applied and aims to stimulate new avenues for the practical realization of these appealing devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Self-citationLi-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
What are batteries, fuel cells, and supercapacitors?
Winter, M., & Brodd, R. J. (2004) · Chemical Reviews · doi:10.1021/cr020730k · Cited by 7,389
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
A review on electrolyte additives for lithium-ion batteries
Zhang, S. S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.07.074 · Cited by 1,831
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Olivetti, E. A., Ceder, G., Gaustad, G. G., & Fu, X. (2017) · Joule · doi:10.1016/j.joule.2017.08.019 · Cited by 1,572
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Electrolyte additive enabled fast charging and stable cycling lithium metal batteries
Zheng, J., Engelhard, M. H., Mei, D., Jiao, S., Polzin, B. J., Zhang, J.-G., & Xu, W. (2017) · Nature Energy · doi:10.1038/nenergy.2017.12 · Cited by 1,343
Reactions in the Rechargeable Lithium–O2 Battery with Alkyl Carbonate Electrolytes
Freunberger, S. A., Chen, Y., Peng, Z., Griffin, J. M., Hardwick, L. J., Bardé, F., Novák, P., & Bruce, P. G. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2021747 · Cited by 1,270
Advances in understanding mechanisms underpinning lithium–air batteries
Aurbach, D., McCloskey, B. D., Nazar, L. F., & Bruce, P. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.128 · Cited by 1,254
Single lithium-ion conducting solid polymer electrolytes: advances and perspectives
Zhang, H., Li, C., Piszcz, M., Coya, E., Rojo, T., Rodriguez-Martinez, L. M., Armand, M., & Zhou, Z. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00491a · Cited by 1,187
Self-citationJohnson, L., Li, C., Liu, Z., Chen, Y., Freunberger, S. A., Ashok, P. C., Praveen, B. B., Dholakia, K., Tarascon, J.-M., & Bruce, P. G. (2014) · Nature Chemistry · doi:10.1038/nchem.2101 · Cited by 1,180
Self-citationOn the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries
Aurbach, D., Gamolsky, K., Markovsky, B., Gofer, Y., Schmidt, M., & Heider, U. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00858-1 · Cited by 992
Laoire, C. O., Mukerjee, S., Abraham, K. M., Plichta, E. J., & Hendrickson, M. A. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp102019y · Cited by 974
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Charging a Li–O2 battery using a redox mediator
Chen, Y., Freunberger, S. A., Peng, Z., Fontaine, O., & Bruce, P. G. (2013) · Nature Chemistry · doi:10.1038/nchem.1646 · Cited by 937
Safer Electrolytes for Lithium‐Ion Batteries: State of the Art and Perspectives
Kalhoff, J., Eshetu, G. G., Bresser, D., & Passerini, S. (2015) · ChemSusChem · doi:10.1002/cssc.201500284 · Cited by 877
Self-citationWinter, M. (2009) · Zeitschrift für Physikalische Chemie · doi:10.1524/zpch.2009.6086 · Cited by 807
Elucidating the Mechanism of Oxygen Reduction for Lithium-Air Battery Applications
Laoire, C. O., Mukerjee, S., Abraham, K. M., Plichta, E. J., & Hendrickson, M. A. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp908090s · Cited by 663
New Nanostructured Li2S/Silicon Rechargeable Battery with High Specific Energy
Yang, Y., McDowell, M. T., Jackson, A., Cha, J. J., Hong, S. S., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl100504q · Cited by 653
Seh, Z. W., Yu, J. H., Li, W., Hsu, P.-C., Wang, H., Sun, Y., Yao, H., Zhang, Q., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6017 · Cited by 600
Han, H.-B., Zhou, S.-S., Zhang, D.-J., Feng, S.-W., Li, L.-F., Liu, K., Feng, W.-F., Nie, J., Li, H., & Huang, X.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.12.040 · Cited by 562
TEMPO: A Mobile Catalyst for Rechargeable Li-O2 Batteries
Bergner, B. J., Schürmann, A., Peppler, K., Garsuch, A., & Janek, J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja508400m · Cited by 551
From lithium to sodium: Cell chemistry of room temperature sodium–air and sodium–sulfur batteries
Adelhelm, P., Hartmann, P., Bender, C. L., Busche, M., Eufinger, C., & Janek, J. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.105 · Cited by 478
Quantifying the promise of lithium–air batteries for electric vehicles
Gallagher, K. G., Goebel, S., Greszler, T., Mathias, M., Oelerich, W., Eroglu, D., & Srinivasan, V. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43870h · Cited by 460
A critical review on lithium–air battery electrolytes
Balaish, M., Kraytsberg, A., & Ein-Eli, Y. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp54165g · Cited by 454
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.041 · Cited by 414
Pang, Q., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07347 · Cited by 411
Rational design of redox mediators for advanced Li–O2 batteries
Lim, H.-D., Lee, B., Zheng, Y., Hong, J., Kim, J., Gwon, H., Ko, Y., Lee, M., Cho, K., & Kang, K. (2016) · Nature Energy · doi:10.1038/nenergy.2016.66 · Cited by 393
From Lithium‐Oxygen to Lithium‐Air Batteries: Challenges and Opportunities
Geng, D., Ding, N., Hor, T. S. A., Chien, S. W., Liu, Z., Wuu, D., Sun, X., & Zong, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502164 · Cited by 384
Effect of vinylene carbonate as additive to electrolyte for lithium metal anode
Ota, H., Shima, K., Ue, M., & Yamaki, J.-I. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2003.09.010 · Cited by 382
A lithium anode protection guided highly-stable lithium–sulfur battery
Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382
Dendrite-Free Lithium Deposition with Self-Aligned Nanorod Structure
Zhang, Y., Qian, J., Xu, W., Russell, S. M., Chen, X., Nasybulin, E., Bhattacharya, P., Engelhard, M. H., Mei, D., Cao, R., et al. (2014) · Nano Letters · doi:10.1021/nl5039117 · Cited by 365
Effects of Some Organic Additives on Lithium Deposition in Propylene Carbonate
Mogi, R., Inaba, M., Jeong, S.-K., Iriyama, Y., Abe, T., & Ogumi, Z. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1516770 · Cited by 360
Wu, F., Lee, J. T., Nitta, N., Kim, H., Borodin, O., & Yushin, G. (2015) · Advanced Materials · doi:10.1002/adma.201404194 · Cited by 352
Redox Mediators for Li–O2 Batteries: Status and Perspectives
Park, J., Lee, S. H., Jung, H., Aurbach, D., & Sun, Y. (2018) · Advanced Materials · doi:10.1002/adma.201704162 · Cited by 350
Ionic‐Liquid–Nanoparticle Hybrid Electrolytes: Applications in Lithium Metal Batteries
Lu, Y., Korf, K., Kambe, Y., Tu, Z., & Archer, L. A. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201307137 · Cited by 348
Dendrite-free Li deposition using trace-amounts of water as an electrolyte additive
Qian, J., Xu, W., Bhattacharya, P., Engelhard, M., Henderson, W. A., Zhang, Y., & Zhang, J.-G. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.009 · Cited by 339
Lu, Y., Das, S. K., Moganty, S. S., & Archer, L. A. (2012) · Advanced Materials · doi:10.1002/adma.201201953 · Cited by 316
Critical Role of Redox Mediator in Suppressing Charging Instabilities of Lithium–Oxygen Batteries
Liang, Z., & Lu, Y.-C. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b01821 · Cited by 314
Zhang, S. S. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.002207jes · Cited by 297
Choi, N.-S., Han, J.-G., Ha, S.-Y., Park, I., & Back, C.-K. (2015) · RSC Advances · doi:10.1039/c4ra11575a · Cited by 297
Moy, D., Manivannan, A., & Narayanan, S. R. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0181501jes · Cited by 289
Recent Progress in Research on High‐Voltage Electrolytes for Lithium‐Ion Batteries
Tan, S., Ji, Y. J., Zhang, Z. R., & Yang, Y. (2014) · ChemPhysChem · doi:10.1002/cphc.201402175 · Cited by 288
Energy Storage Materials Synthesized from Ionic Liquids
Gebresilassie Eshetu, G., Armand, M., Scrosati, B., & Passerini, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405910 · Cited by 276
Self-citationXing, L., Li, W., Wang, C., Gu, F., Xu, M., Tan, C., & Yi, J. (2009) · The Journal of Physical Chemistry B · doi:10.1021/jp9074064 · Cited by 272
A self-defense redox mediator for efficient lithium–O2 batteries
Zhang, T., Liao, K., He, P., & Zhou, H. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02803e · Cited by 257
Sulfurized solid electrolyte interphases with a rapid Li+ diffusion on dendrite-free Li metal anodes
Cheng, X.-B., Yan, C., Peng, H.-J., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.03.008 · Cited by 257
Yan, C., Cheng, X.-B., Zhao, C.-Z., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.056 · Cited by 255
Strategies Based on Nitride Materials Chemistry to Stabilize Li Metal Anode
Zhu, Y., He, X., & Mo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600517 · Cited by 254
Qian, Y., Niehoff, P., Börner, M., Grützke, M., Mönnighoff, X., Behrends, P., Nowak, S., Winter, M., & Schappacher, F. M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.023 · Cited by 250
Heine, J., Hilbig, P., Qi, X., Niehoff, P., Winter, M., & Bieker, P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0011507jes · Cited by 246
Wang, J., Lin, F., Jia, H., Yang, J., Monroe, C. W., & NuLi, Y. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405157 · Cited by 220
Song, Y.-M., Han, J.-G., Park, S., Lee, K. T., & Choi, N.-S. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta01129e · Cited by 217
Ye, H., Yin, Y.-X., Zhang, S.-F., Shi, Y., Liu, L., Zeng, X.-X., Wen, R., Guo, Y.-G., & Wan, L.-J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.056 · Cited by 205
Ren, X., Zhang, Y., Engelhard, M. H., Li, Q., Zhang, J.-G., & Xu, W. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00982 · Cited by 194
Lithiumbatterien und elektrische Doppelschichtkondensatoren: aktuelle Herausforderungen
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie · doi:10.1002/ange.201201429 · Cited by 188
Liu, S., Li, G.-R., & Gao, X.-P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12231 · Cited by 177
Burns, J. C., Petibon, R., Nelson, K. J., Sinha, N. N., Kassam, A., Way, B. M., & Dahn, J. R. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.031310jes · Cited by 165
Ultrasmall Li2S Nanoparticles Anchored in Graphene Nanosheets for High-Energy Lithium-Ion Batteries
Zhang, K., Wang, L., Hu, Z., Cheng, F., & Chen, J. (2014) · Scientific Reports · doi:10.1038/srep06467 · Cited by 152
Han, J., Lee, S. J., Lee, J., Kim, J.-S., Lee, K. T., & Choi, N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01770 · Cited by 150
Jia, W., Fan, C., Wang, L., Wang, Q., Zhao, M., Zhou, A., & Li, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03897 · Cited by 150
Materials challenges in rechargeable lithium-air batteries
Kwabi, D. G., Ortiz‐Vitoriano, N., Freunberger, S. A., Chen, Y., Imanishi, N., Bruce, P. G., & Shao‐Horn, Y. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.87 · Cited by 144
Dong, P., Wang, D., Yao, Y., Li, X., Zhang, Y., Ru, J., & Ren, T. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.116 · Cited by 143
Pires, J., Castets, A., Timperman, L., Santos-Peña, J., Dumont, E., Levasseur, S., Tessier, C., Dedryvère, R., & Anouti, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.065 · Cited by 140
Ionic liquids as tailored media for the synthesis and processing of energy conversion materials
Eshetu, G. G., Armand, M. B., Ohno, H., Scrosati, B., & Passerini, S. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02284c · Cited by 137
Self-citationZheng, X.-W., Wang, X.-S., Cai, X., Xing, L.-D., Xu, M.-Q., Liao, Y.-H., Li, X.-P., & Li, W.-S. (2016) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.6b09554 · Cited by 134
Understanding the fundamentals of redox mediators in Li–O 2 batteries: a case study on nitroxides
Bergner, B. J., Hofmann, C., Schürmann, A., Schröder, D., Peppler, K., Schreiner, P. R., & Janek, J. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp04505c · Cited by 130
The role of iodide in the formation of lithium hydroxide in lithium–oxygen batteries
Tułodziecki, M., Leverick, G., Amanchukwu, C. V., Katayama, Y., Kwabi, D. G., Bardé, F., Hammond, P. T., & Shao‐Horn, Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00954b · Cited by 126
Wang, X., Zheng, X., Liao, Y., Huang, Q., Xing, L., Xu, M., & Li, W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.10.103 · Cited by 123
Stable lithium electrodeposition in salt-reinforced electrolytes
Lü, Y., Tu, Z., Shu, J. B., & Archer, L. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.030 · Cited by 122
Barghamadi, M., Best, A. S., Bhatt, A. I., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.150 · Cited by 110
Building better lithium-sulfur batteries: from LiNO3 to solid oxide catalyst
Ding, N., Zhou, L., Zhou, C., Geng, D., Jin, Y., Chien, S. W., Liu, Z., Ng, M., Yu, A., Hor, T. S. A., et al. (2016) · Scientific Reports · doi:10.1038/srep33154 · Cited by 109
Activated Li2S as a High-Performance Cathode for Rechargeable Lithium–Sulfur Batteries
Zu, C., Klein, M. J., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5021108 · Cited by 104
Azimi, N., Xue, Z., Rago, N. L. D., Takoudis, C. G., Gordin, M. L., Song, J., Wang, D., & Zhang, Z. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0431501jes · Cited by 96
An efficient Li2S-based lithium-ion sulfur battery realized by a bifunctional electrolyte additive
Liu, M., Ren, Y., Jiang, H., Luo, C., Kang, F., & Zhao, T. S. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.017 · Cited by 94
The Impact of Li Grain Size on Coulombic Efficiency in Li Batteries
Mehdi, B. L., Stevens, A., Qian, J., Park, C., Xu, W., Henderson, W. A., Zhang, J., Mueller, K. T., & Browning, N. D. (2016) · Scientific Reports · doi:10.1038/srep34267 · Cited by 90
Phosphorus additives for improving high voltage stability and safety of lithium ion batteries
von Aspern, N., Röser, S., Rad, B. R., Murmann, P., Streipert, B., Mönnighoff, X., Tillmann, S. D., Shevchuk, M., Stubbmann‐Kazakova, O., Röschenthaler, G., et al. (2017) · Journal of Fluorine Chemistry · doi:10.1016/j.jfluchem.2017.02.005 · Cited by 80
Bryantsev, V. S., Giordani, V., Walker, W. T., Uddin, J., Lee, I., van Duin, A. C. T., Chase, G. V., & Addison, D. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp402844r · Cited by 78
Ionic‐Liquid–Nanoparticle Hybrid Electrolytes: Applications in Lithium Metal Batteries
Lü, Y., Korf, K., Kambe, Y., Tu, Z., & Archer, L. A. (2013) · Angewandte Chemie · doi:10.1002/ange.201307137 · Cited by 76
Understanding oxygen electrochemistry in aprotic Li O2 batteries
Wang, L., Zhang, Y., Liu, Z., Guo, L., & Peng, Z. (2017) · Green Energy & Environment · doi:10.1016/j.gee.2017.06.004 · Cited by 73
Toward in-situ protected sulfur cathodes by using lithium bromide and pre-charge
Wu, F., Thieme, S., Ramanujapuram, A., Zhao, E., Weller, C., Althues, H., Kaskel, S., Borodin, O. A., & Yushin, G. N. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.012 · Cited by 68
Kim, J., Yoo, D., Min, J., Shakoor, R. A., Kahraman, R., & Choi, J. W. (2015) · ChemNanoMat · doi:10.1002/cnma.201500055 · Cited by 54
LiPF6/methyl difluoroacetate electrolyte with vinylene carbonate additive for Li-ion batteries
Satõ, K., Zhao, L., Okada, S., & Yamaki, J.-I. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.02.068 · Cited by 48
Yan, C., Xu, Y., Xia, J., Gong, C., & Chen, K. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.04.010 · Cited by 47
Rong, H., Xu, M., Xie, B., Lin, H., Zhu, Y., Zheng, X., Huang, W., Liao, Y., Xing, L., & Li, W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.120 · Cited by 46
Kazazi, M., Vaezi, M. R., & Kazemzadeh, A. (2014) · Ionics · doi:10.1007/s11581-014-1095-2 · Cited by 41
Tu, W., Xing, L., Xia, P., Xu, M., Liao, Y., & Li, W. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.02.170 · Cited by 39
Zhang, S. S., Foster, D., & Read, J. A. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.10.052 · Cited by 29
Zheng, D., Lee, H.-S., Yang, X., & Qu, D. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.12.003 · Cited by 29
Optimising the concentration of LiNO3 additive in C4mpyr-TFSI electrolyte-based Li-S battery
Barghamadi, M., Best, A. S., Hollenkamp, A. F., et al. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.10.169 · Cited by 27
Wang, J., Lin, F., Jia, H., Yang, J., Monroe, C. W., & NuLi, Y. (2014) · Angewandte Chemie · doi:10.1002/ange.201405157 · Cited by 22
The Origin of Li-O2Battery Performance Enhancement Using Fluorocarbon Additive
Wijaya, O., Rinaldi, A., Younesi, R., & Yazami, R. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0671613jes · Cited by 13
Huang, T., Zheng, X., Wu, M., Wang, W., Pan, Y. J., & Fang, G. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.028 · Cited by 11
Interphases Between Electrolytes and Anodes in Li-Ion Battery
Xu, M., Xing, L., & Li, W. (2014) · Modern aspects of electrochemistry · doi:10.1007/978-1-4939-0302-3_5 · Cited by 10
Cited by
Approaching high-performance potassium-ion batteries via advanced design strategies and engineering
Zhang, W., Liu, Y., & Guo, Z. (2019) · Science Advances · doi:10.1126/sciadv.aav7412 · Cited by 1,158
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Rational solvent molecule tuning for high-performance lithium metal battery electrolytes
Yu, Z., Rudnicki, P. E., Zhang, Z., Huang, Z., Celik, H., Oyakhire, S. T., Chen, Y., Kong, X., Kim, S. C., Xiao, X., et al. (2022) · Nature Energy · doi:10.1038/s41560-021-00962-y · Cited by 937
Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Cheng, X.-B., Zhao, C.-Z., Yao, Y.-X., Liu, H., & Zhang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.12.002 · Cited by 874
Materials Design for Rechargeable Metal-Air Batteries
Wang, H.-F., & Xu, Q. (2019) · Matter · doi:10.1016/j.matt.2019.05.008 · Cited by 580
Metadata
- Authors
- Zhang, H., Eshetu, G. G., Judez, X., Li, C., Rodriguez‐Martínez, L. M., & Armand, M.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2018-10-15
- Volume
- 57
- Issue
- 46
- Pages
- 15002-15027
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2794189429
- Cited by
- 774
- References
- 112
- FWCI
- 30.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.