The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Optimum absorber parameters for various combinations of response and excitation parameters
Abstract
In recent papers the author has shown that when determining optimum parameters for an absorber which minimizes the vibration response of a complex system, the latter may be treated as an equivalent single degree‐of‐freedom system if its natural frequencies are well separated. Emphasis was on minimizing the displacement response when the excitation was a harmonic force. In the present paper simple expressions for optimum absorber parameters are derived for undamped one degree‐of‐freedom main systems for harmonic and white noise random excitations with force and frame acceleration as input and minimization of various response parameters. These expressions can be used to obtain optimum parameters for absorbers attached to complex systems provided that optimization is with respect to an absolute, rather than a relative, quantity. The requirement that the natural frequencies should be well separated is investigated numerically for the different cases. The effect of damping in the main system on optimum absorber parameters is investigated also.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
BISHOP, R. E. D. (1957) · Nature · doi:10.1038/179504a0 · Cited by 1,636
Random Vibration in Mechanical Systems
(1963) · Elsevier eBooks · doi:10.1016/c2013-0-12506-8 · Cited by 899
Vibration and Shock in Damped Mechanical Systems
Snowdon, J. C., & Jones, D. I. G. (1969) · Journal of Applied Mechanics · doi:10.1115/1.3564684 · Cited by 414
Optimum absorber parameters for simple systems
Warburton, G. B., & Ayorinde, E. O. (1980) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290080302 · Cited by 368
Self-citationVibration and shock in damped mechanical systems
Snowdon, J. C. (1968) · Cited by 368
Optimum Vibration Absorbers for Linear Damped Systems
Randall, S. E., Halsted, D. M., & Taylor, D. L. (1981) · Journal of Mechanical Design · doi:10.1115/1.3255005 · Cited by 182
On the Dynamic Vibration Damped Absorber of the Vibration System
Ioi, T., & Ikeda, K. (1978) · Bulletin of JSME · doi:10.1299/jsme1958.21.64 · Cited by 151
Thompson, A. (1981) · Journal of Sound and Vibration · doi:10.1016/s0022-460x(81)80176-9 · Cited by 149
Optimum absorber parameters for minimizing vibration response
Warburton, G. B. (1981) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290090306 · Cited by 145
Self-citationMinimizing structural vibrations with absorbers
Ayorinde, E. O., & Warburton, G. B. (1980) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290080303 · Cited by 133
Self-citation
Research works printed but not linked: 5
- 10.1121/1.1919039 · doi:10.1121/1.1919039
- 10.1016/0022-460X(71)90427-5 · doi:10.1016/0022-460x(71)90427-5
- James H. M., 1947, Theory of Servomechanisms
- Bapat V. A., 1979, Effect of primary damping on the tuning conditions of a dynamic vibration absorber, Proc. 5th world cong. theory of machines and mechanisms, 1, 329
- Sauer F. M., 1949, Performance of the viscously damped vibration absorber applied to systems having frequency squared excitation, J. appl. mech. ASME, 16, 109, 10.1115/1.4009923 · doi:10.1115/1.4009923
Cited by
Marian, L., & Giaralis, A. (2014) · Probabilistic Engineering Mechanics · doi:10.1016/j.probengmech.2014.03.007 · Cited by 828
Parametric study and simplified design of tuned mass dampers
Rana, R., & Soong, T. T. (1998) · Engineering Structures · doi:10.1016/s0141-0296(97)00078-3 · Cited by 651
Research developments in vibration control of structures using passive tuned mass dampers
Elias, S., & Matsagar, V. (2017) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2017.09.015 · Cited by 556
Optimal tuned mass damper for seismic applications and practical design formulas
Hoang, N., Fujino, Y., & Warnitchai, P. (2008) · Engineering Structures · doi:10.1016/j.engstruct.2007.05.007 · Cited by 382
Optimal design and performance evaluation of systems with Tuned Mass Damper Inerter (TMDI)
Pietrosanti, D., De Angelis, M., & Basili, M. (2017) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.2861 · Cited by 349
Yamaguchi, H., & Harnpornchai, N. (1993) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290220105 · Cited by 341
Wind-Induced Vibration Mitigation in Tall Buildings Using the Tuned Mass-Damper-Inerter
Giaralis, A., & Petrini, F. (2017) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0001863 · Cited by 330
Dynamic characterization of multiple tuned mass dampers and some design formulas
Abé, M., & Fujino, Y. (1994) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290230802 · Cited by 329
Dynamic characteristics of multiple substructures with closely spaced frequencies
Xu, K., & Igusa, T. (1992) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290211203 · Cited by 326
Performance of Multiple Mass Dampers under Random Loading
Kareem, A., & Kline, S. (1995) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(1995)121:2(348) · Cited by 306
Using multiple tuned mass dampers to control offshore wind turbine vibrations under multiple hazards
Zuo, H., Bi, K., & Hao, H. (2017) · Engineering Structures · doi:10.1016/j.engstruct.2017.03.006 · Cited by 284
Design formulas for tuned mass dampers based on a perturbation technique
Fujino, Y., & Abé, M. (1993) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290221002 · Cited by 276
Tsai, H., & Lin, G. (1993) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290221104 · Cited by 271
Estimating optimum parameters of tuned mass dampers using harmony search
Bekdaş, G., & Nigdeli, S. M. (2011) · Engineering Structures · doi:10.1016/j.engstruct.2011.05.024 · Cited by 259
Dynamic response and optimal design of structures with large mass ratio TMD
De Angelis, M., Perno, S., & Reggio, A. (2012) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.1117 · Cited by 239
Improvement of tuned mass damper by using rotational inertia through tuned viscous mass damper
Garrido, H., Curadelli, O., & Ambrosini, D. (2013) · Engineering Structures · doi:10.1016/j.engstruct.2013.08.044 · Cited by 227
Frequency analysis of the tuned mass damper
Krenk, S. (2005) · Journal of Applied Mechanics · doi:10.1115/1.2062867 · Cited by 217
Li, C. (2002) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.128 · Cited by 189
Dai, J., Xu, Z.-D., & Gai, P.-P. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2019.109585 · Cited by 163
Bekdaş, G., & Nigdeli, S. M. (2017) · Soil Dynamics and Earthquake Engineering · doi:10.1016/j.soildyn.2016.10.019 · Cited by 124
Robust design optimization of TMDs in vehicle–bridge coupled vibration problems
Miguel, L. F. F., Lopez, R. H., Torii, A. J., Miguel, L. F. F., & Beck, A. T. (2016) · Engineering Structures · doi:10.1016/j.engstruct.2016.08.033 · Cited by 104
OPTIMUM MULTIPLE TUNED MASS DAMPERS FOR BASE-EXCITED DAMPED MAIN SYSTEM
BAKRE, S. V., & JANGID, R. S. (2004) · International Journal of Structural Stability and Dynamics · doi:10.1142/s0219455404001367 · Cited by 84
H 2 Optimization of the Three-Element Type Dynamic Vibration Absorbers
Asami, T., & Nishihara, O. (2002) · Journal of Vibration and Acoustics · doi:10.1115/1.1501286 · Cited by 60
Zhang, Z., & Balendra, T. (2013) · Engineering Structures · doi:10.1016/j.engstruct.2013.03.044 · Cited by 56
Dai, K., Wang, J., Mao, R., Lu, Z., & Chen, S. (2017) · The Structural Design of Tall and Special Buildings · doi:10.1002/tal.1350 · Cited by 53
Timoshenko beam with tuned mass dampers and its design curves
Chen, Y.-H., & Huang, Y.-H. (2004) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2003.10.013 · Cited by 47
Matta, E. (2018) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.2987 · Cited by 47
Jabary, R. N., & Madabhushi, S. P. G. (2015) · Soil Dynamics and Earthquake Engineering · doi:10.1016/j.soildyn.2015.06.013 · Cited by 44
Kwag, S., Eem, S., Kwak, J., Lee, H., Oh, J., & Koo, G.-H. (2021) · Nuclear Engineering and Technology · doi:10.1016/j.net.2021.02.009 · Cited by 38
Ueng, J., Lin, C., & Wang, J. (2008) · The Structural Design of Tall and Special Buildings · doi:10.1002/tal.336 · Cited by 36
Li, C. (2012) · The Structural Design of Tall and Special Buildings · doi:10.1002/tal.624 · Cited by 35
Development of optimal design formula for bi-tuned mass dampers using multi-objective optimization
Ok, S.-Y., Song, J., & Park, K.-S. (2009) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2008.11.023 · Cited by 35
Ruiz, R. O., Taflanidis, A. A., & Lopez-Garcia, D. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.01.014 · Cited by 32
Seismic effectiveness of hysteretic tuned mass dampers for inelastic structures
Boccamazzo, A., Carboni, B., Quaranta, G., & Lacarbonara, W. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.110591 · Cited by 31
Compliant liquid column damper modified by shape memory alloy device for seismic vibration control
Gur, S., Mishra, S. K., Bhowmick, S., & Chakraborty, S. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/10/105009 · Cited by 30
Quaranta, G., Mollaioli, F., & Monti, G. (2016) · Earthquakes and Structures · doi:10.12989/eas.2016.10.1.239 · Cited by 26
Comparative performance of passive devices for piping system under seismic excitation
Kumar, P., Jangid, R. S., & Reddy, G. R. (2016) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2015.11.019 · Cited by 21
Chu, S.-Y., Yeh, S.-W., Lu, L.-Y., & Peng, C.-H. (2017) · Structural Control and Health Monitoring · doi:10.1002/stc.1896 · Cited by 20
Tuned mass dampers for torsionally coupled systems
Pansare, A. P., & Jangid, R. S. (2003) · Wind and Structures · doi:10.12989/was.2003.6.1.023 · Cited by 18
Chey, M.-H., & Kim, J.-U. (2012) · Frontiers of Structural and Civil Engineering · doi:10.1007/s11709-012-0170-x · Cited by 17
Control performance evaluation of semi-active tmd subjected to various types of loads
Kim, H.-S., Chang, C., & Kang, J.-W. (2015) · International Journal of Steel Structures · doi:10.1007/s13296-015-9006-6 · Cited by 16
Calayir, M., Tao, J., Mercan, O., & Bezabeh, M. A. (2026) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.70129 · Cited by 8
Optimum Multiple Tuned Mass Dampers for base-excited undamped system
(1999) · doi:10.1002/(sici)1096-9845(199909)28:9<1041::aid-eqe853>3.0.co;2-e
Metadata
- Authors
- Warburton, G. B.
- Venue
- Earthquake Engineering & Structural Dynamics
- Publisher
- Wiley
- Published
- 1982-05
- Volume
- 10
- Issue
- 3
- Pages
- 381-401
- ISSN
- 0098-8847 (ISSN-L)
- 1096-9845
- OpenAlex
- W2152709812
- Cited by
- 1,043
- References
- 12
- FWCI
- 9.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.