An Overview of Polylactides as Packaging Materials
The DOI matches its Crossref record; 245 of the 245 references it cites were found in a registry or an index.
Abstract
Summary: Polylactide polymers have gained enormous attention as a replacement for conventional synthetic packaging materials in the last decade. By being truly biodegradable, derived from renewable resources and by providing consumers with extra end‐use benefits such as avoiding paying the “green tax” in Germany or meeting environmental regulations in Japan, polylactides (PLAs) are a growing alternative as a packaging material for demanding markets. The aim of this paper is to review the production techniques for PLAs, summarize the main properties of PLA and to delineate the main advantages and disadvantages of PLA as a polymeric packaging material. PLA films have better ultraviolet light barrier properties than low density polyethylene (LDPE), but they are slightly worse than those of cellophane, polystyrene (PS) and poly(ethylene terephthalate) (PET). PLA films have mechanical properties comparable to those of PET and better than those of PS. PLA also has lower melting and glass transition temperatures than PET and PS. The glass transition temperature of PLA changes with time. Humidity between 10 and 95% and storage temperatures of 5 to 40 °C do not have an effect on the transition temperature of PLA, which can be explained by its low water sorption values (i.e. <100 ppm at A w = 1). PLA seals well at temperatures below the melting temperature but an appreciable shrinking of the films has been noted when the material is sealed near its melting temperature. Solubility parameter predictions indicate that PLA will interact with nitrogen compounds, anhydrides and some alcohols and that it will not interact with aromatic hydrocarbons, ketones, esters, sulfur compounds or water. The CO 2 , O 2 and water permeability coefficients of PLA are lower than those of PS and higher than those of PET. Its barrier to ethyl acetate and D ‐limonene is comparable to PET. The amount of lactic acid and its derivatives that migrate to food simulant solutions from PLA is much lower than any of the current average dietary lactic acid intake values allowed by several governmental agencies. Thus, PLA is safe for use in fabricating articles for contact with food. Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films. image Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For the sustained delivery of bioactive compounds, LA and glycolic acid were already proposed as bioresorbable matrices in 1973 [89].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [89]
In the citing paper
“However, the rate of the PLA crystallization is slow (Auras et al., 2004;Liu et al., 2014;Murariu et al., 2015;Zhang et al., 2018), frequently slower than the cooling rate used in common polymer processing devices (Zhang et al., 2018).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Therefore, commercial PLA's are semicrystalline with melting temperature, T m , between 140 and 180 • C in dependence on the enantiomeric purity (Fambri and Migliaresi, 2010) and glass transition temperature, T g , which usually ranges from 55 to 65 • C (Auras et al., 2004;Krishnan et al., 2016).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Some recent studies showed that, by adding bacteria and substrate-degrading enzymes for simultaneous saccharification and fermentation, starch or cellulosic biomass can be saccharified and simultaneously converted into lactic acid; this process can be used as a replacement for the above-mentioned traditional fermentation steps [28,29].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [28]
In the citing paper
“The relative reactivity towards the monomers is important for the formation of block copolymers which are typically produced by sequential addition. [19]”
From Master of Chaos and Order: Opposite Microstructures of PCL‐co‐PGA‐co‐PLA Accessible by a Single Catalyst** (2022) · cites this paper as [19]
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Research works printed but not linked: 65
- Aluminum Association, 1999, Tokyo Steps up to Recycling Efforts
- Mochizuki M., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 1
- Tsuji H., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 129
- Gruber P. R., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 235
- Kawahima N., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 251
- 10.1111/j.1574-6976.1995.tb00168.x · doi:10.1111/j.1574-6976.1995.tb00168.x · Paper page
- N.Whiteman “2000 Polymers Laminations and Coatings Conference” Chicago IL2000 p.631–635.
- J. B.Snook M.Sc. Thesis Michigan State University East Lansing1994 p.130.
- Perego G., 1996, Polymer, 59, 37
- M. H.Hartmann N.Whiteman “TAPPI Polymers Laminations & Coatings Conference” Chicago IL United States2000 p.467–474.
- Leaversuch R. D., 2003, Plastics Technology
- Baillie J., 1997, Packag. Week, 13
- O'Brien M., 2003, Ilip Launches New Fresh Food Packaging Solution
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- Kharas G. B., 1994, Plastics from Microbes, 93
- D. R.Witzke Ph.D. Thesis Michigan State University East Lansing MI1997 p.389.
- 10.1016/0032-3861(81)90256-1 · DOI
- 10.1016/0032-3861(95)93647-5 · DOI · Paper page
- Huang J., 1996, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 37, 370
- Rappard P., 1997, Packag. Rev. S. Afr., 23, 19
- Farrer K. T. H., 1983, Packag. News
- Dunkley W. L., 1963, Milk Dealer, 52, 52
- R.Auras Ph.D. Thesis Michigan State University East Lansing2004 p.268.
- VanKrevelen D. W., 1997, Properties of Polymers
- Ou X., 2003, ANTEC 2003, 1701
- Doi Y., 1994, Biodegradable Plastics and Polymers: Proceedings of the Third International Scientific Workshop on Biodegradable Plastics and Polymers, Osaka, Japan (Studies in Polymer Science, 12), 464
- J. R.Dorgan J.Randal J.Janzen D.Knauss B.Braun P.Gruber “Global Plastics Environmental Conference 2004” Detroit MI February 18–192004.
- Cargill‐Dow‐LLC, PLA Polymer 4042D – A NatureWorks Product. Biaxially Oriented Films – General Purpose
- D. M.Bigg “Annual Technical Conference – Society of Plastics Engineers” 1996 p.2028–2039.
- Barton A. F. M., 1999, Handbook of Solubility Parameters and Other Cohesion Parameters
- Hansen C. M., 1967, J. Paint Technol., 39, 511
- Rocha G., 1992, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 33, 454
- Pauly S., 1999, Polymer Handbook, 547
- Siparsky G. L., 1997, J. Environ. Polym. Degrad., 5, 125, 10.1007/bf02763656 · DOI · Paper page
- N.Whiteman P.DeLassus J.Gunderson “Polymers Laminations & Coatings Conference Proceeding Polyolefins 2002 International Conference on Polyolefins” Houston Texas USA February 24–27 2002.
- 10.1023/a:1021869530253 · doi:10.1023/a:1021869530253
- 10.1023/a:1021860301487 · doi:10.1023/a:1021860301487
- 10.1023/a:1022874530586 · doi:10.1023/a:1022874530586
- 10.1023/a:1022849813748 · doi:10.1023/a:1022849813748
- 10.1023/a:1021808317416 · DOI
- 10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s · doi:10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s
- 10.1016/0142-9612(90)90124-9 · DOI · Paper page
- 10.1023/a:1021812418325 · doi:10.1023/a:1021812418325
- 10.1002/app.11605 · DOI · Paper page
- 10.1023/a:1016036302871 · DOI
- R. G.Sinclair “The First Corn Utilization Conference” St. Louis Missouri June 11–12 1987 p.1–16.
- 10.1016/0032-3861(79)90009-0 · DOI · Paper page
- Park J. W., 1999, Korea Polym. J., 7, 93
- Kim H. S., 1998, Korea Polym. J., 6, 422
- 10.1016/0032-3861(96)83146-6 · DOI
- Farmaceutico S., 2003, Lactide/Glycolide Copolymers: Review on Toxicity, Biocompatibility, and Clinical Application (data up to 1999)
- Hartmann M. H., 1999, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 40, 570
- O'Brien M., 2003, Cargill Dow's World‐scale Manufacturing Facility Comes On Line
- O'Brien M., 2003, Biopolymer Industry Moves from Field of Dreams to Reality: Consumer Products Hitting Retail Shelves Across the Globe
- O'Brien M., 2003, First North American Converter Takes Aim at Grocery Industry with NatureWorks™ PLA
- O'Brien M., 2001, Unifi and Cargill Dow Provide Update on NatureWorks™ PLA Development, 2
- 2003, Faerch Plast to Market Food Packaging from Nature
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- NatureWorks™ PLA, 2003, Top It Off With NatureWorks™ PLA. Dairy and Delicatessen Container Lidding Solutions
- 2003, Kanebo Corn Fiber
- Lunt J., 2003, Polylactic Acid Polymers from Corn: Potential Applications in the Textiles Industry
- Arai K., 2001, Biodegradable Lactide and Polyester Copolymers for use in Packaging and Their Film Properties
- Mohan A. M., 2002, Packag. Digest, 30, 34
- Nageroni J., 2001, Flexible Packag., 25
- Michael O. B., 2003, Ilip Launches New Fresh Food Packaging Solution
Cited by
Items 601–700 of 1,031
Wu, L., Park, J., Kamaki, Y., & Kim, B. (2021) · Microsystems & Nanoengineering · doi:10.1038/s41378-021-00284-9 · Cited by 85
Beauson, J., Schillani, G., der Schueren, L. V., & Goutianos, S. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106668 · Cited by 85
Impact of corona treatment on PLA film properties
Rocca-Smith, J. R., Karbowiak, T., Marcuzzo, E., Sensidoni, A., Piasente, F., Champion, D., Heinz, O., Vitry, P., Bourillot, E., Lesniewska, É., et al. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.03.020 · Cited by 85
State-of-the-Art Overview on Polymer/POSS Nanocomposite
Kausar, A. (2017) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2016.1276592 · Cited by 85
Li, X., Yan, X., Yang, J., Pan, H., Gao, G., Zhang, H., & Dong, L. (2018) · Polymer Engineering & Science · doi:10.1002/pen.24795 · Cited by 82
Highly active Mg(ii) and Zn(ii) complexes for the ring opening polymerisation of lactide
McKeown, P., McCormick, S. N., Mahon, M. F., & Jones, M. D. (2018) · Polymer Chemistry · doi:10.1039/c8py01369a · Cited by 80
Gürler, N., Paşa, S., Alma, M. H., & Temel, H. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109588 · Cited by 85
Thermal degradation kinetics study of molten polylactide based on Raman spectroscopy
Lin, Z., Guo, X., He, Z., Liang, X., Wang, M., & Jin, G. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25568 · Cited by 85
A review on bio-based polymer polylactic acid potential on sustainable food packaging
Rajendran, D. S., Venkataraman, S., Jha, S. K., Chakrabarty, D., & Vaidyanathan, V. K. (2024) · Food Science and Biotechnology · doi:10.1007/s10068-024-01543-x · Cited by 84
Arrieta, M. P., Parres, F. J., López, J., & Jiménez, A. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.01.017 · Cited by 84
Sabet, S. S., & Katbab, A. A. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29210 · Cited by 77
Li, D., Zhao, X., Jia, Y.-W., Wang, X., & Wang, Y. (2018) · Composites Communications · doi:10.1016/j.coco.2018.04.001 · Cited by 84
Zeid, A., Karabagias, I. K., Nassif, M. R. M., & Kontominas, M. G. (2019) · Journal of Food Processing and Preservation · doi:10.1111/jfpp.14102 · Cited by 84
Martínez‐Abad, A., Ocio, M. J., Lagaron, J. M., & Sánchez, G. (2013) · International Journal of Food Microbiology · doi:10.1016/j.ijfoodmicro.2012.12.024 · Cited by 83
Cheng, K., Yu, C.-B., Guo, W., Wang, S., Chuang, T., & Lin, Y.-H. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.065 · Cited by 83
Modi, S. J., Koelling, K. W., & Vodovotz, Y. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.07.036 · Cited by 84
Vegetal fiber‐based biocomposites: Which stakes for food packaging applications?
Berthet, M.-A., Angellier‐Coussy, H., Guillard, V., & Gontard, N. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42528 · Cited by 83
Microcellular processing of polylactide–hyperbranched polyester–nanoclay composites
Pilla, S., Kramschuster, A., Lee, J., Clemons, C. C., Gong, S., & Turng, L. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4261-6 · Cited by 84
Ouchiar, S., Stoclet, G., Cabaret, C., & Gloaguen, V. (2016) · Macromolecules · doi:10.1021/acs.macromol.5b02746 · Cited by 84
Chen, Y.-K., Lin, Y.-F., Peng, Z.-W., & Lin, J. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp105581t · Cited by 83
Aytaç, Z., Keskin, N. O. S., Tekinay, T., & Uyar, T. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.44858 · Cited by 83
Thermo-Mechanical Performance of Polylactide Composites Reinforced with Alkali-Treated Bamboo Fibers
Wang, F., Zhou, S., Yang, M., Chen, Z., & Ran, S. (2018) · Polymers · doi:10.3390/polym10040401 · Cited by 83
Poly(lactic acid)/nanocellulose biocomposites for sustainable food packaging
Jacob, J., Linson, N., Mavelil‐Sam, R., Maria, H. J., Pothan, L. A., Thomas, S., Kabdrakhmanova, S., & Laroze, D. (2024) · Cellulose · doi:10.1007/s10570-024-05975-w · Cited by 82
Yuan, D., Chen, K., Xu, C., Chen, Z., & Chen, Y. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.07.044 · Cited by 82
Wen, X., Zhang, K., Wang, Y., Han, L., Han, C., Zhang, H., Chen, S., & Dong, L. (2010) · Polymer International · doi:10.1002/pi.2927 · Cited by 83
Observation and Analysis of Molecular Vibration Modes in Polylactide at Terahertz Frequencies
Fuse, N., Sato, R., Mizuno, M., Fukunaga, K., Itoh, K., & Ohki, Y. (2010) · Japanese Journal of Applied Physics · doi:10.1143/jjap.49.102402 · Cited by 82
Samsudin, H., Soto‐Valdez, H., & Auras, R. A. (2014) · Food Control · doi:10.1016/j.foodcont.2014.04.045 · Cited by 83
Self-citationCrystal nucleation in random l/d-lactide copolymers
Androsch, R., Lorenzo, M. L. D., & Schick, C. H. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.01.020 · Cited by 82
Production and Application of Lactic Acid
Rodrigues, C., Vandenberghe, L. P. D. S., Woiciechowski, A. L., de Oliveira, J., Letti, L. A. J., & Soccol, C. R. (2016) · Elsevier eBooks · doi:10.1016/b978-0-444-63662-1.00024-5 · Cited by 82
Peponi, L., Sessini, V., Arrieta, M. P., Navarro-Baena, I., Sonseca, Á., Dominici, F., Giménez, E., Torre, L., Tercjak, A., López, D., et al. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.02.019 · Cited by 82
Baek, N., Kim, Y. T., Marcy, J. E., Duncan, S. E., & O’Keefe, S. F. (2018) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2018.05.004 · Cited by 82
Sun, Q. G., Ding, Y., Stoliarov, S. I., Sun, J., Fontaine, G., & Bourbigot, S. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108055 · Cited by 82
Foaming of PLA Composites by Supercritical Fluid-Assisted Processes: A Review
Jiménez, J. A. V., Moigne, N. L., Bénézet, J., Sauceau, M., Sescousse, R., & Fages, J. (2020) · Molecules · doi:10.3390/molecules25153408 · Cited by 81
State of the art on biodegradability of bio-based plastics containing polylactic acid
Lors, C., Leleux, P., & Park, C. H. (2025) · Frontiers in Materials · doi:10.3389/fmats.2024.1476484 · Cited by 83
Biodegradable materials from grafting of modified PLA onto starch nanocrystals
García, N. L., Lamanna, M. E., D’Accorso, N. B., Dufresne, A., Aranguren, M. I., & Goyanes, S. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.03.032 · Cited by 81
Yamada, M., Matsumoto, K., Shimizu, K., Uramoto, S., Nakai, T., Shozui, F., & Taguchi, S. (2010) · Biomacromolecules · doi:10.1021/bm901437z · Cited by 81
Iñiguez‐Franco, F., Auras, R. A., Ahmed, J., Selke, S. E. M., Rubino, M. I., Dolan, K. D., & Soto‐Valdez, H. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.02.028 · Cited by 81
Self-citationPreparation and characterization of biodegradable and compostable PLA/TPS/ESO compositions
Przybytek, A., Sienkiewicz, M., Kucińska‐Lipka, J., & Janik, H. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.06.016 · Cited by 81
Sharma, S., Singh, A. A., Majumdar, A., & Butola, B. S. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03521-9 · Cited by 83
Zaidi, L., Bruzaud, S., Bourmaud, A., Médéric, P., Kaci, M., & Grohens, Y. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.31655 · Cited by 74
Tsuji, H., Tashiro, K., Bouapao, L., & Hanesaka, M. (2011) · Polymer · doi:10.1016/j.polymer.2011.12.023 · Cited by 80
Badia-Valiente, J. D., Santonja‐Blasco, L., Moriana, R., & Ribes-Greus, A. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.06.002 · Cited by 80
Processing and characterization of solid and foamed injection-molded polylactide with talc
Ameli, A., Jahani, D., Nofar, M., Jung, P. U., & Park, C. B. (2013) · Journal of Cellular Plastics · doi:10.1177/0021955x13481993 · Cited by 80
Lins, L. C., Wianny, F., Livi, S., Hidalgo, I. A., Dehay, C., Duchet-Rumeau, J., & Gérard, J.-F. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00820 · Cited by 75
Poly(lactic acid)‐based nanocomposites
Basu, A., Nazarkovsky, M., Ghadi, R., Khan, W., & Domb, A. J. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3985 · Cited by 82
Tailoring the Attraction of Polymers toward Surfaces
Stein, G. E., Laws, T. S., & Verduzco, R. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b00492 · Cited by 80
Lü, Y., Cueva, M. C., Lara‐Curzio, E., & Ozcan, S. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.05.047 · Cited by 80
Sakamoto, Y., & Tsuji, H. (2013) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200657 · Cited by 72
Rosen, T., Popowski, Y., Goldberg, I., & Kol, M. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201601979 · Cited by 74
Faludi, G., Dora, G., Imre, B., Renner, K. E., Móczó, J., & Pukánszky, B. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39902 · Cited by 80
Yu, Y., Cheng, Y., Ren, J., Cao, E., Fu, X., & Guo, W. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.41808 · Cited by 79
Development of Force Field Parameters for Molecular Simulation of Polylactide
McAliley, J. H., & Bruce, D. A. (2011) · Journal of Chemical Theory and Computation · doi:10.1021/ct200251x · Cited by 79
Lizundia, E., Oleaga, A., Salazar, A., & Sarasua, J.-R. (2012) · Polymer · doi:10.1016/j.polymer.2012.03.046 · Cited by 79
Crystallization of PLA/Thermoplastic Starch Blends
Li, H., & Huneault, M. A. (2008) · International Polymer Processing · doi:10.3139/217.2185 · Cited by 67
Zhang, W., Wang, Y., Sun, W.-H., Wang, L., & Redshaw, C. (2012) · Dalton Transactions · doi:10.1039/c2dt31215h · Cited by 76
Analysis of structural rearrangements of poly(lactic acid) in the presence of water
Vyavahare, O., Ng, D., & Hsu, S. L. (2014) · The Journal of Physical Chemistry B · doi:10.1021/jp500219j · Cited by 78
Eesaee, M., Ghassemi, P., Nguyen, D. D., Thomas, S., Elkoun, S., & Nguyen-Tri, P. (2022) · Biochemical Engineering Journal · doi:10.1016/j.bej.2022.108588 · Cited by 78
Nilsuwan, K., Guerrero, P., de la Caba, K., Benjakul, S., & Prodpran, T. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.105792 · Cited by 78
Bozó, É., Ervasti, H., Halonen, N., Shokouh, S. H. H., Tolvanen, J., Pitkänen, O., Järvinen, T., Pálvölgyi, P. S., Szamosvölgyi, Á., Sápi, A., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c13787 · Cited by 78
Meniscus regeneration by 3D printing technologies: Current advances and future perspectives
Stocco, E., Porzionato, A., Rose, E. D., Barbon, S., De, R., & Macchi, V. (2022) · Journal of Tissue Engineering · doi:10.1177/20417314211065860 · Cited by 78
Dithiodiolate Ligands: Group 4 Complexes and Application in Lactide Polymerization
Sergeeva, E., Kopilov, J., Goldberg, I., & Kol, M. (2010) · Inorganic Chemistry · doi:10.1021/ic100390x · Cited by 77
Coordination Chemistry and Reactivity of Zinc Complexes Supported by a Phosphido Pincer Ligand
D'Auria, I., Lamberti, M., Mazzeo, M., Milione, S., Roviello, G., & Pellecchia, C. (2012) · Chemistry – A European Journal · doi:10.1002/chem.201102414 · Cited by 80
Water vapour permeability of poly(lactic acid): Crystallinity and the tortuous path model
Duan, Z., & Thomas, N. L. (2014) · Journal of Applied Physics · doi:10.1063/1.4865168 · Cited by 78
Li, F., Wang, S., Liu, W., & Chen, G. (2008) · FEMS Microbiology Letters · doi:10.1111/j.1574-6968.2008.01109.x · Cited by 78
Effect of the Recycling and Annealing on the Mechanical and Fracture Properties of Poly(Lactic Acid)
Nascimento, L., Gamez-Perez, J., Santana, O. O., Velasco, J. I., Maspoch, M. L., & Franco-Urquiza, E. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0229-5 · Cited by 64
Fabrication of a polymer-based biodegradable stent using a CO2 laser
Stepak, B. D., Antończak, A. J., Bartkowiak-Jowsa, M., Filipiak, J., Pezowicz, C. A., & Abramski, K. M. (2013) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2013.08.005 · Cited by 78
Biodegradable Polyesters as Crystallization-Accelerating Agents of Poly( l -lactide)
Tsuji, H., Sawada, M., & Bouapao, L. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am9002759 · Cited by 78
Zhang, G., Fiore, G. L., Clair, T. L. S., & Fraser, C. L. (2009) · Macromolecules · doi:10.1021/ma9000622 · Cited by 78
Synthesis and Organocatalytic Ring-Opening Polymerization of Cyclic Esters Derived from l-Malic Acid
Pounder, R. J., & Dove, A. P. (2010) · Biomacromolecules · doi:10.1021/bm1004355 · Cited by 68
Zaaba, N. F., & Ismail, H. (2019) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2019.1599941 · Cited by 78
Elgarahy, A. M., Priya, A. K., Mostafa, H. Y., Zaki, E. G., Elsaeed, S. M., Muruganandam, M., & Elwakeel, K. Z. (2023) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.110993 · Cited by 77
Morphology, rheological behavior, and thermal stability of PLA/PBSA/POSS composites
Wang, R., Wang, S., & Zhang, Y. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30333 · Cited by 76
Tawakkal, I. S. M. A., Cran, M. J., & Bigger, S. W. (2015) · LWT · doi:10.1016/j.lwt.2015.11.011 · Cited by 77
Ding, Y., McKinnon, M. B., Stoliarov, S. I., Fontaine, G., & Bourbigot, S. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.05.014 · Cited by 77
Effect of Compatibilizer on PLA/PP Blend for Injection Molding
Pivsa‐Art, S., Kord-Sa-Ard, J., Pivsa‐Art, W., Wongpajan, R., O-Charoen, N., Pavasupree, S., & Hamada, H. (2016) · Energy Procedia · doi:10.1016/j.egypro.2016.05.046 · Cited by 77
Effect of the state of water and relative humidity on ageing of PLA films
Rocca-Smith, J. R., Chau, N. T., Champion, D., Brachais, C., Marcuzzo, E., Sensidoni, A., Piasente, F., Karbowiak, T., & Debeaufort, F. (2017) · Food Chemistry · doi:10.1016/j.foodchem.2017.02.113 · Cited by 77
Effect of Maleated PLA on the Properties of Rotomolded PLA-Agave Fiber Biocomposites
González‐López, M. E., Pérez‐Fonseca, A. A., Cisneros‐López, E. O., Manríquez‐González, R., Ramírez‐Arreola, D. E., Rodrigue, D., & Robledo‐Ortíz, J. R. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-018-1308-2 · Cited by 78
Lohmeijer, P. J. A., Goossens, H., & Peters, G. G. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44566 · Cited by 76
Are bio-based and biodegradable microplastics impacting for blue mussel (Mytilus edulis)?
Khalid, A., Zalouk‐Vergnoux, A., Benali, S., Mincheva, R., Raquez, J., Bertrand, S., & Poirier, L. (2021) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2021.112295 · Cited by 76
Lavecchia, F., Guerra, M. G., & Galantucci, L. M. (2021) · Progress in Additive Manufacturing · doi:10.1007/s40964-021-00213-2 · Cited by 76
Awad, S. A., Siakeng, R., Khalaf, E. M., Mahmoud, M. H., Fouad, H., Jawaid, M., & Sain, M. M. (2023) · Sustainable materials and technologies · doi:10.1016/j.susmat.2023.e00620 · Cited by 76
Sustainable recycling of polymers: a comprehensive review
Kolluru, S., Thakur, A., Tamakuwala, D., Kumar, V. V., Ramakrishna, S., & Sharan Chandran, M. (2024) · Polymer Bulletin · doi:10.1007/s00289-024-05195-z · Cited by 76
Degradation and Viscoelastic Properties of PLA-PCL, PGA-PCL, PDO and PGA Fibres
Vieira, A. C., Vieira, J. C., Guedes, R. M., & Marques, A. T. (2010) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.636-637.825 · Cited by 66
Ahmed, J., Hiremath, N., & Jacob, H. (2016) · International Journal of Food Properties · doi:10.1080/10942912.2015.1131165 · Cited by 76
Clarkson, C. M., Azrak, S. M. E. A., Schueneman, G. T., Snyder, J. F., & Youngblood, J. P. (2019) · Polymer · doi:10.1016/j.polymer.2019.122101 · Cited by 76
Cyclohexyl-Substituted Polyglycolides with High Glass Transition Temperatures
Jing, F., Smith, M. R., & Baker, G. L. (2007) · Macromolecules · doi:10.1021/ma071430d · Cited by 68
Barrier Properties and Characterizations of Poly(lactic Acid)/ZnO Nanocomposites
Tang, Z., Fan, F., Chu, Z., Fan, C., & Qin, Y. (2020) · Molecules · doi:10.3390/molecules25061310 · Cited by 75
Humidity sensor based on poly(lactic acid)/PANI–ZnO composite electrospun fibers
Parangusan, H., Bhadra, J., Ahmad, Z., Mallick, S., Touati, F., & Al-Thani, N. J. (2021) · RSC Advances · doi:10.1039/d1ra02842a · Cited by 75
Melt processing of poly( L ‐lactic acid) in the presence of organomodified anionic or cationic clays
Katiyar, V., Gerds, N., Koch, C., Risbo, J., Hansen, H. C. B., & Plackett, D. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33984 · Cited by 75
Ghosh, S., Viana, J. C., Reis, R. L., & Mano, J. F. (2007) · Polymer Engineering and Science · doi:10.1002/pen.20799 · Cited by 75
Esterification of Condensed Tannins and Their Impact on the Properties of Poly(Lactic Acid)
Grigsby, W. J., Bridson, J. H., Lomas, C., & Elliot, J.-A. (2013) · Polymers · doi:10.3390/polym5020344 · Cited by 75
García, M. G. P., Gutiérrez, M. C., Mota-Morales, J. D., Luna‐Bárcenas, G., & del Monte, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04830 · Cited by 75
Polymerisation of a terpene-derived lactone: a bio-based alternative to ε-caprolactone
Quilter, H. C., Hutchby, M., Davidson, M. G., & Jones, M. D. (2017) · Polymer Chemistry · doi:10.1039/c6py02033j · Cited by 65
Highly Active N,O Zinc Guanidine Catalysts for the Ring‐Opening Polymerization of Lactide
Schäfer, P. M., Fuchs, M., Ohligschläger, A., Rittinghaus, R., McKeown, P., Akin, E., Schmidt, M., Hoffmann, A., Liauw, M. A., Jones, M. D., et al. (2017) · ChemSusChem · doi:10.1002/cssc.201701237 · Cited by 71
Vahabi, H., Shabanian, M., Aryanasab, F., Mangin, R., Laoutid, F., & Saeb, M. R. (2018) · Thermochimica Acta · doi:10.1016/j.tca.2018.06.004 · Cited by 76
Hu, H., Zhang, R., Jiang, Y., Shi, L., Wang, J., Ying, W. B., & Zhu, J. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05990 · Cited by 75
Della Monica, F., Luciano, E., Roviello, G., Grassi, A., Milione, S., & Capacchione, C. (2014) · Macromolecules · doi:10.1021/ma5003358 · Cited by 74
Bai, J., Wang, J., Wang, W., Fang, H., Xu, Z., Chen, X., & Wang, Z. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01110 · Cited by 73
Younas, M., Noreen, A., Sharif, A., Majeed, A., Hassan, A., Tabasum, S., Mohammadi, A., & Zia, K. M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.064 · Cited by 74
Singh, A. A., Sharma, S., Srivastava, M., & Majumdar, A. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.10.246 · Cited by 74
Metadata
- Authors
- Auras, R., Harte, B., & Selke, S.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Auras, Rafael
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2004-08-24
- Volume
- 4
- Issue
- 9
- Pages
- 835-864
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2054432898
- Cited by
- 3,454
- References
- 240
- Citations by year
- 2026: 160 · 2025: 172 · 2024: 191 · 2023: 196 · 2022: 237 · 2021: 258 · 2020: 202 · 2019: 204 · 2018: 191 · 2017: 227 · 2016: 198 · 2015: 212 · 2014: 183 · 2013: 185 · 2012: 149
- FWCI
- 2.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- polylactic acid, biodegradable packaging, PLA films, mechanical properties, glass transition temperature, water sorption, solubility parameter, gas permeability, barrier properties, food contact safety, bio-based polymers
- MeSH terms
- Biocompatible Materials, Biotechnology, Diffusion, Glass, Hot Temperature, Models, Chemical, Polyesters, Polymers, Solubility, Spectrophotometry, Temperature, Thermodynamics, Time Factors, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.