An Overview of Polylactides as Packaging Materials
The DOI matches its Crossref record; 245 of the 245 references it cites were found in a registry or an index.
Abstract
Summary: Polylactide polymers have gained enormous attention as a replacement for conventional synthetic packaging materials in the last decade. By being truly biodegradable, derived from renewable resources and by providing consumers with extra end‐use benefits such as avoiding paying the “green tax” in Germany or meeting environmental regulations in Japan, polylactides (PLAs) are a growing alternative as a packaging material for demanding markets. The aim of this paper is to review the production techniques for PLAs, summarize the main properties of PLA and to delineate the main advantages and disadvantages of PLA as a polymeric packaging material. PLA films have better ultraviolet light barrier properties than low density polyethylene (LDPE), but they are slightly worse than those of cellophane, polystyrene (PS) and poly(ethylene terephthalate) (PET). PLA films have mechanical properties comparable to those of PET and better than those of PS. PLA also has lower melting and glass transition temperatures than PET and PS. The glass transition temperature of PLA changes with time. Humidity between 10 and 95% and storage temperatures of 5 to 40 °C do not have an effect on the transition temperature of PLA, which can be explained by its low water sorption values (i.e. <100 ppm at A w = 1). PLA seals well at temperatures below the melting temperature but an appreciable shrinking of the films has been noted when the material is sealed near its melting temperature. Solubility parameter predictions indicate that PLA will interact with nitrogen compounds, anhydrides and some alcohols and that it will not interact with aromatic hydrocarbons, ketones, esters, sulfur compounds or water. The CO 2 , O 2 and water permeability coefficients of PLA are lower than those of PS and higher than those of PET. Its barrier to ethyl acetate and D ‐limonene is comparable to PET. The amount of lactic acid and its derivatives that migrate to food simulant solutions from PLA is much lower than any of the current average dietary lactic acid intake values allowed by several governmental agencies. Thus, PLA is safe for use in fabricating articles for contact with food. Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films. image Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For the sustained delivery of bioactive compounds, LA and glycolic acid were already proposed as bioresorbable matrices in 1973 [89].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [89]
In the citing paper
“However, the rate of the PLA crystallization is slow (Auras et al., 2004;Liu et al., 2014;Murariu et al., 2015;Zhang et al., 2018), frequently slower than the cooling rate used in common polymer processing devices (Zhang et al., 2018).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Therefore, commercial PLA's are semicrystalline with melting temperature, T m , between 140 and 180 • C in dependence on the enantiomeric purity (Fambri and Migliaresi, 2010) and glass transition temperature, T g , which usually ranges from 55 to 65 • C (Auras et al., 2004;Krishnan et al., 2016).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Some recent studies showed that, by adding bacteria and substrate-degrading enzymes for simultaneous saccharification and fermentation, starch or cellulosic biomass can be saccharified and simultaneously converted into lactic acid; this process can be used as a replacement for the above-mentioned traditional fermentation steps [28,29].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [28]
In the citing paper
“The relative reactivity towards the monomers is important for the formation of block copolymers which are typically produced by sequential addition. [19]”
From Master of Chaos and Order: Opposite Microstructures of PCL‐co‐PGA‐co‐PLA Accessible by a Single Catalyst** (2022) · cites this paper as [19]
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Research works printed but not linked: 66
- Aluminum Association, 1999, Tokyo Steps up to Recycling Efforts
- Mochizuki M., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 1
- Tsuji H., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 129
- Gruber P. R., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 235
- Kawahima N., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 251
- 10.1111/j.1574-6976.1995.tb00168.x · doi:10.1111/j.1574-6976.1995.tb00168.x · Paper page
- N.Whiteman “2000 Polymers Laminations and Coatings Conference” Chicago IL2000 p.631–635.
- J. B.Snook M.Sc. Thesis Michigan State University East Lansing1994 p.130.
- Perego G., 1996, Polymer, 59, 37
- M. H.Hartmann N.Whiteman “TAPPI Polymers Laminations & Coatings Conference” Chicago IL United States2000 p.467–474.
- Leaversuch R. D., 2003, Plastics Technology
- Baillie J., 1997, Packag. Week, 13
- O'Brien M., 2003, Ilip Launches New Fresh Food Packaging Solution
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- Kharas G. B., 1994, Plastics from Microbes, 93
- D. R.Witzke Ph.D. Thesis Michigan State University East Lansing MI1997 p.389.
- 10.1016/0032-3861(81)90256-1 · DOI
- 10.1016/0032-3861(95)93647-5 · DOI · Paper page
- Huang J., 1996, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 37, 370
- Rappard P., 1997, Packag. Rev. S. Afr., 23, 19
- Farrer K. T. H., 1983, Packag. News
- Dunkley W. L., 1963, Milk Dealer, 52, 52
- R.Auras Ph.D. Thesis Michigan State University East Lansing2004 p.268.
- VanKrevelen D. W., 1997, Properties of Polymers
- Ou X., 2003, ANTEC 2003, 1701
- Doi Y., 1994, Biodegradable Plastics and Polymers: Proceedings of the Third International Scientific Workshop on Biodegradable Plastics and Polymers, Osaka, Japan (Studies in Polymer Science, 12), 464
- J. R.Dorgan J.Randal J.Janzen D.Knauss B.Braun P.Gruber “Global Plastics Environmental Conference 2004” Detroit MI February 18–192004.
- Cargill‐Dow‐LLC, PLA Polymer 4042D – A NatureWorks Product. Biaxially Oriented Films – General Purpose
- D. M.Bigg “Annual Technical Conference – Society of Plastics Engineers” 1996 p.2028–2039.
- Barton A. F. M., 1999, Handbook of Solubility Parameters and Other Cohesion Parameters
- Hansen C. M., 1967, J. Paint Technol., 39, 511
- Rocha G., 1992, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 33, 454
- Pauly S., 1999, Polymer Handbook, 547
- Siparsky G. L., 1997, J. Environ. Polym. Degrad., 5, 125, 10.1007/bf02763656 · DOI · Paper page
- N.Whiteman P.DeLassus J.Gunderson “Polymers Laminations & Coatings Conference Proceeding Polyolefins 2002 International Conference on Polyolefins” Houston Texas USA February 24–27 2002.
- 10.1023/a:1021869530253 · doi:10.1023/a:1021869530253
- 10.1023/a:1021860301487 · doi:10.1023/a:1021860301487
- 10.1023/a:1022874530586 · doi:10.1023/a:1022874530586
- 10.1023/a:1022849813748 · doi:10.1023/a:1022849813748
- 10.1023/a:1021808317416 · DOI
- 10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s · doi:10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s
- 10.1016/0142-9612(90)90124-9 · DOI · Paper page
- 10.1023/a:1021812418325 · doi:10.1023/a:1021812418325
- 10.1002/app.11605 · DOI · Paper page
- 10.1023/a:1016036302871 · DOI
- R. G.Sinclair “The First Corn Utilization Conference” St. Louis Missouri June 11–12 1987 p.1–16.
- 10.1016/0032-3861(79)90009-0 · DOI · Paper page
- 10.1002/(sici)1097-4628(19981212)70:11<2259::aid-app20>3.0.co;2-j · doi:10.1002/(sici)1097-4628(19981212)70:11<2259::aid-app20>3.0.co;2-j
- Park J. W., 1999, Korea Polym. J., 7, 93
- Kim H. S., 1998, Korea Polym. J., 6, 422
- 10.1016/0032-3861(96)83146-6 · DOI
- Farmaceutico S., 2003, Lactide/Glycolide Copolymers: Review on Toxicity, Biocompatibility, and Clinical Application (data up to 1999)
- Hartmann M. H., 1999, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 40, 570
- O'Brien M., 2003, Cargill Dow's World‐scale Manufacturing Facility Comes On Line
- O'Brien M., 2003, Biopolymer Industry Moves from Field of Dreams to Reality: Consumer Products Hitting Retail Shelves Across the Globe
- O'Brien M., 2003, First North American Converter Takes Aim at Grocery Industry with NatureWorks™ PLA
- O'Brien M., 2001, Unifi and Cargill Dow Provide Update on NatureWorks™ PLA Development, 2
- 2003, Faerch Plast to Market Food Packaging from Nature
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- NatureWorks™ PLA, 2003, Top It Off With NatureWorks™ PLA. Dairy and Delicatessen Container Lidding Solutions
- 2003, Kanebo Corn Fiber
- Lunt J., 2003, Polylactic Acid Polymers from Corn: Potential Applications in the Textiles Industry
- Arai K., 2001, Biodegradable Lactide and Polyester Copolymers for use in Packaging and Their Film Properties
- Mohan A. M., 2002, Packag. Digest, 30, 34
- Nageroni J., 2001, Flexible Packag., 25
- Michael O. B., 2003, Ilip Launches New Fresh Food Packaging Solution
Cited by
Items 701–800 of 1,031
Mittal, M., Mittal, D., & Aggarwal, N. K. (2022) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-17792-w · Cited by 74
Properties Investigation of Epoxidized Sunflower Oil as Bioplasticizer for Poly (Lactic Acid)
Bouti, M., Irinislimane, R., & Belhaneche‐Bensemra, N. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02194-3 · Cited by 74
Pellis, A., Acero, E. H., Weber, H., Obersriebnig, M., Breinbauer, R., Srebotnik, E., & Guebitz, G. M. (2015) · Biotechnology Journal · doi:10.1002/biot.201500074 · Cited by 74
Yamada, M., Matsumoto, K., Uramoto, S., Motohashi, R., Abe, H., & Taguchi, S. (2011) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2011.05.011 · Cited by 74
Stoclet, G., Sclavons, M., Lecouvet, B., Devaux, J., Velthem, P. V., Boborodea, A., Bourbigot, S., & Sallem-Idrissi, N. (2014) · RSC Advances · doi:10.1039/c4ra06845a · Cited by 74
Narita, J., Katagiri, M., & Tsuji, H. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100024 · Cited by 72
Potential role of nanofillers as compatibilizers in immiscible PLA/LDPE Blends
Vrsaljko, D., Macut, D., & Kovačević, V. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41414 · Cited by 74
A study on properties of PLA/PBAT from blown film process
Hongdilokkul, P., Keeratipinit, K., Chawthai, S., Hararak, B., Seadan, M., & Suttiruengwong, S. (2015) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/87/1/012112 · Cited by 74
Scale-Dependent Miscibility of Polylactide and Polyhydroxybutyrate: Molecular Dynamics Simulations
Glova, A. D., Falkovich, S. G., Dmitrienko, D. I., Lyulin, A. V., Larin, S. V., Nazarychev, V. M., Karttunen, M., & Lyulin, S. V. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01640 · Cited by 74
Chemical recycling of poly(lactic acid) by water-ethanol solutions
Iñiguez‐Franco, F., Auras, R. A., Dolan, K. D., Selke, S. E. M., Holmes, D., Rubino, M. I., & Soto‐Valdez, H. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.01.016 · Cited by 74
Self-citationOligo(lactic acid)-grafted starch: A compatibilizer for poly(lactic acid)/thermoplastic starch blend
Noivoil, N., & Yoksan, R. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.05.178 · Cited by 74
Gorrasi, G., Vittoria, V., Murariu, M., Ferreira, A. D. S., Alexandre, M., & Dúbois, P. (2008) · Biomacromolecules · doi:10.1021/bm700568n · Cited by 74
Extrusion Foaming of Poly(Lactic acid) Blown with CO 2 : Toward 100% Green Material
Reignier, J., Gendron, R., & Champagne, M. F. (2007) · Cellular Polymers · doi:10.1177/026248930702600202 · Cited by 74
Órteses e próteses de membro superior impressas em 3D: uma revisão integrativa
Morimoto, S. Y. U., Cabral, A. K. P. D. S., Sanguinetti, D. C. D. M., de Freitas, E. D. S. R., Merino, G. S. A. D., da Costa, J. Â. P., Coelho, W. K., & Amaral, D. S. (2021) · Cadernos Brasileiros de Terapia Ocupacional · doi:10.1590/2526-8910.ctoao2078 · Cited by 73
Barrier Properties of Semicrystalline Polylactide: The Role of the Density of the Amorphous Regions
Safandowska, M., Makarewicz, C., Różański, A., & Idczak, R. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c01490 · Cited by 73
Rahman, M. M., Afrin, S., Haque, P., Islam, M. M., Islam, M. S., & Gafur, M. A. (2014) · International Journal of Chemical Engineering · doi:10.1155/2014/842147 · Cited by 73
Gui, Z., Lu, C., & Cheng, S. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.08.011 · Cited by 73
Murariu, M., Paint, Y., Murariu, O., Raquez, J., Bonnaud, L., & Dúbois, P. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42480 · Cited by 73
Collins, R. A., Unruangsri, J., & Mountford, P. (2012) · Dalton Transactions · doi:10.1039/c2dt32151c · Cited by 73
Antimicrobial Food Packaging Based on Biodegradable Materials
Ibarra, V. G., Sendón, R., & de Quirós, A. R. B. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-800723-5.00029-2 · Cited by 73
Enzymatic synthesis of poly-l-lactide and poly-l-lactide-co-glycolide in an ionic liquid
Chanfreau, S., Mena, M., Porras-Domínguez, J. R., Ramírez-Gilly, M., Gimeno, M., Roquero, P., Tecante, A., & Bárzana, E. (2010) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-009-0388-8 · Cited by 72
“PLA and its copolymers, especially those with glycolide (GA), known as poly-lactide-co-glycolides (PLGA), have been pointed out as alternative biomaterials for many applications in biomedicine or as packaging materials [2, 3].”
BackgroundZhao, H., Bian, Y., Li, Y., Dong, Q., Han, C., & Dong, L. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01194e · Cited by 72
PLA/wood biocomposites: Improving composite strength by chemical treatment of the fibers
Csizmadia, R., Faludi, G., Renner, K. E., Móczó, J., & Pukánszky, B. (2013) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.06.003 · Cited by 72
Wu, F., Zhang, B., Yang, W. M., Liu, Z., & Yang, M. (2014) · Polymer · doi:10.1016/j.polymer.2014.08.070 · Cited by 72
Enzymatic Degradation of Poly(l-Lactic Acid): Effects of UV Irradiation
Tsuji, H., Echizen, Y., & Nishimura, Y. (2006) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0023-6 · Cited by 72
Xu, H., Yang, X., Xie, L., & Hakkarainen, M. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.5b01636 · Cited by 72
Ha, J., Back, K.-H., Kim, Y., & Kang, D. (2016) · Food Microbiology · doi:10.1016/j.fm.2016.02.007 · Cited by 72
Coiai, S., Lorenzo, M. L. D., Cinelli, P., Righetti, M. C., & Passaglia, E. (2021) · Polymers · doi:10.3390/polym13152489 · Cited by 72
Tsuji, H., Ogiwara, M., Saha, S. K., & Sakaki, T. (2005) · Biomacromolecules · doi:10.1021/bm0507453 · Cited by 72
Pavón, C., Aldás, M., de la Rosa‐Ramírez, H., López, J., & Arrieta, M. P. (2020) · Polymers · doi:10.3390/polym12122891 · Cited by 71
Pascual, A., Sardón, H., Ruipérez, F., Gracia, R., Sudam, P., Veloso, A., & Mecerreyes, D. (2014) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27473 · Cited by 71
Imre, B., Bedő, D., Domján, A., Schön, P. M., Vancso, G. J., & Pukánszky, B. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.07.007 · Cited by 71
Preparation and properties of self-reinforced poly(lactic acid) composites based on oriented tapes
Mai, F., Tu, W., Bilotti, E., & Peijs, T. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.05.030 · Cited by 71
Biorenewable blends of polyamide‐4,10 and polyamide‐6,10
Moran, C. S., Barthelon, A., Pearsall, A., Mittal, V., & Dorgan, J. R. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43626 · Cited by 71
Payne, J., Kociok-Köhn, G. I., Emanuelsson, E. A. C., & Jones, M. D. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01207 · Cited by 71
Optical Properties of Polylactides
Hutchinson, M. H., Dorgan, J. R., Knauss, D. M., & Hait, S. B. (2006) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0001-z · Cited by 70
Perspectives of polylactic acid from structure to applications
Sreekumar, K., Bindhu, B., & Veluraja, K. (2021) · Polymers from Renewable Resources · doi:10.1177/20412479211008773 · Cited by 70
Lü, B., Jiang, C., Chen, Z., Li, A., Wang, W., Zhang, S., & Luo, G. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155108 · Cited by 70
Organo-Catalyzed Ring Opening Polymerization of a 1,4-Dioxane-2,5-dione Deriving from Glutamic Acid
Boullay, O. T. D., Saffon‐Merceron, N., Diehl, J.-P., Martín-Vaca, B. M., & Bourissou, D. (2010) · Biomacromolecules · doi:10.1021/bm100433c · Cited by 70
Biodegradable polymeric microcapsules: Preparation and properties
Sawalha, H., Schroën, K. G. P. H., & Boom, R. M. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.078 · Cited by 70
Lin, H., Liu, S., Han, L., Wang, X., Bian, Y., & Dong, L. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.03.025 · Cited by 70
Eyholzer, C., Tingaut, P., Zimmermann, T., & Oksman, K. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0508-4 · Cited by 70
Melt rheology of polylactide/montmorillonite nanocomposites
Gu, S., Ren, J., & Dong, B. (2007) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21317 · Cited by 70
Ren, Q., Wang, J., Zhai, W., & Su, S. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie402039y · Cited by 70
Lebarbé, T., Grau, É., Gadenne, B., Alfos, C., & Cramail, H. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500648g · Cited by 70
Rosli, N. A., Ahmad, I. B., Anuar, F. H., & Abdullah, I. (2016) · Polymer Testing · doi:10.1016/j.polymertesting.2016.07.021 · Cited by 70
Nguyen, H. T., Short, G. N., Qi, P., & Miller, S. A. (2017) · Green Chemistry · doi:10.1039/c6gc03238a · Cited by 70
Polylactic Acid (PLA)-Based Nanocomposites: Processing and Properties
Sharif, A., Mondal, S., & Hoque, M. E. (2019) · Springer eBooks · doi:10.1007/978-3-030-05825-8_11 · Cited by 70
Physical ageing of Poly(Lactic acid): Factors and consequences for practice
Cui, L., Imre, B., Tátraaljai, D., & Pukánszky, B. (2019) · Polymer · doi:10.1016/j.polymer.2019.122014 · Cited by 70
Li, Y., Chen, C., Li, J., & Sun, X. S. (2011) · Polymer · doi:10.1016/j.polymer.2011.03.050 · Cited by 70
Improved mechanical and thermal properties of PLLA by solvent blending with PDLA-b-PEG-b-PDLA
Liu, Y., Shao, J., Sun, J., Bian, X., Feng, L., Xiang, S., Sun, B., Chen, Z., Li, G., & Chen, X. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.023 · Cited by 69
Ali, Z., Abdullah, M., Yasin, M. T., Amanat, K., Ahmad, K., Ahmed, I., Qaisrani, M. M., & Khan, J. (2023) · Environmental Research · doi:10.1016/j.envres.2023.117949 · Cited by 69
Hou, B., Wang, Y., Gong, T., Wang, R., Huang, L., Li, B., & Li, J. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.149932 · Cited by 69
Benkraled, L., Zennaki, A., Zair, L., Arabeche, K., Berrayah, A., Barrera, A., Bouberka, Z., & Maschke, U. (2024) · Polymers · doi:10.3390/polym16070974 · Cited by 70
Fracture behavior of quenched poly(lactic acid)
Gámez‐Pérez, J., Infante, J. C. V., Urquiza, E. A. F., Pagès, P., Carrasco, F., Pérez, O. O. S., & Maspoch, M. L. (2010) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2011.9 · Cited by 69
Ageing of poly(lactic acid) films plasticized with commercial polyadipates
Martino, V. P., Ruseckaite, R. A., & Jiménez, A. (2009) · Polymer International · doi:10.1002/pi.2556 · Cited by 69
High‐Performance Carbon Nanotube‐Reinforced Bioplastic
Ramontja, J., Ray, S. S., Pillai, S. K., & Luyt, A. S. (2009) · Macromolecular Materials and Engineering · doi:10.1002/mame.200900197 · Cited by 66
Pluta, M., Murariu, M., Alexandre, M., Gałęski, A., & Dúbois, P. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.02.001 · Cited by 69
Madera-Santana, T. J., Meléndrez, R., González‐García, G., Quintana, P., & Pillai, S. D. (2016) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2016.02.001 · Cited by 69
Synthesis of bottlebrush copolymers based on poly(dimethylsiloxane) for surface active additives
Pesek, S. L., Lin, Y., Mah, H. Z., Kasper, W., Chen, B., Rohde, B. J., Robertson, M. L., Stein, G. E., & Verduzco, R. (2016) · Polymer · doi:10.1016/j.polymer.2016.01.057 · Cited by 69
Bai, D., Liu, H., Bai, H., Zhang, Q., & Fu, Q. (2016) · Scientific Reports · doi:10.1038/srep20260 · Cited by 69
Nanocellulose-Based Polymeric Blends for Food Packaging Applications
Arrieta, M. P., Fortunati, E., Burgos, N., Peltzer, M. A., López, J., & Peponi, L. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-44248-0.00007-9 · Cited by 69
Zafar, M. T., Maiti, S. N., & Ghosh, A. K. (2016) · RSC Advances · doi:10.1039/c6ra17894d · Cited by 69
Properties and phase structure of melt-processed PLA/PMMA blends
Gonzalez‐Garzon, M., Shahbikian, S., & Huneault, M. A. (2018) · Journal of Polymer Research · doi:10.1007/s10965-018-1438-1 · Cited by 69
Jin, X., Cui, S., Sun, S., Gu, X., Li, H., Sun, J. C., Zhang, S., & Bourbigot, S. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00278 · Cited by 69
Emerging Trends in Biopolymers for Food Packaging
Torres‐Giner, S., López, K. J. F., Meléndez-Rodríguez, B., Prieto, C., Pardo‐Figuerez, M., & Lagaron, J. M. (2021) · Wiley eBooks · doi:10.1002/9783527820078.ch1 · Cited by 68
Use of bio-based products towards more sustainable road paving binders: A state-of-the-art review
Musco, A., Tarsi, G., Tataranni, P., Salzano, E., & Sangiorgi, C. (2024) · Journal of Road Engineering · doi:10.1016/j.jreng.2024.04.002 · Cited by 68
State-of-the-art biobased food packaging materials
Robertson, G. L. (2008) · Elsevier eBooks · doi:10.1533/9781845694784.1.3 · Cited by 68
PLLA/Flax Mat/Balsa Bio-Sandwich Manufacture and Mechanical Properties
Duigou, A. L., Deux, J.-M., Davies, P., & Baley, C. (2010) · Applied Composite Materials · doi:10.1007/s10443-010-9173-8 · Cited by 68
Random aliphatic copolyesters as new biodegradable impact modifiers for polylactide materials
Odent, J., Raquez, J., Duquesne, E., & Dúbois, P. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.11.002 · Cited by 68
Tensile Properties of Polylactide/Poly(ethylene glycol) Blends
Li, F., Liang, J., Zhang, S., & Zhu, B. (2015) · Journal of Polymers and the Environment · doi:10.1007/s10924-015-0718-7 · Cited by 68
Odent, J., Habibi, Y., Raquez, J., & Dúbois, P. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.05.003 · Cited by 68
Rahaman, M. H., & Tsuji, H. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.38953 · Cited by 68
Khan, B. A., Na, H., Chevali, V. S., Warner, P., Zhu, J., & Wang, H. (2017) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2017.03.004 · Cited by 68
Zhang, X., Liu, Q., Shi, J., Ye, H., & Zhou, Q. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-1064-8 · Cited by 68
Bioplastics for Food Packaging
Byun, Y., & Kim, Y. T. (2013) · Elsevier eBooks · doi:10.1016/b978-0-12-394601-0.00014-x · Cited by 68
Arrieta, M. P., de Dicastillo, C. L., Garrido, L., Roa, K., & Galotto, M. J. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.04.012 · Cited by 68
Block–Stereoblock Copolymers of Poly(ϵ‐Caprolactone) and Poly(Lactic Acid)
Rosen, T., Goldberg, I., Navarra, W., Venditto, V., & Kol, M. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201803063 · Cited by 67
Salehiyan, R., Nofar, M., Malkappa, K., & Ray, S. S. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25505 · Cited by 68
Stereocomplexed PLA nanocomposites: From in situ polymerization to materials properties
Re, G. L., Benali, S., Habibi, Y., Raquez, J., & Dúbois, P. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.03.004 · Cited by 67
Closing the Gap between Bio-Based and Petroleum-Based Plastic through Bioengineering
Al-Khairy, D., Fu, W., Alzahmi, A. S., Twizere, J., Amin, S. A., Salehi‐Ashtiani, K., & Mystikou, A. (2022) · Microorganisms · doi:10.3390/microorganisms10122320 · Cited by 67
Deng, Y., Mehner, F., & Gaitzsch, J. (2023) · Macromolecular Rapid Communications · doi:10.1002/marc.202200941 · Cited by 67
Fu, Y., Liao, L., Yang, L., Lan, Y., Mei, L., Liu, Y., & Hu, S. (2012) · Molecular Simulation · doi:10.1080/08927022.2012.738294 · Cited by 67
Thermal degradation kinetics of sucrose palmitate reinforced poly(lactic acid) biocomposites
Valapa, R., Pugazhenthi, G., & Katiyar, V. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.01.053 · Cited by 67
Thermal, oxygen barrier and mechanical properties of polylactide–organoclay nanocomposites
Yourdkhani, M., Mousavand, T., Chapleau, N., & Hubert, P. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.03.015 · Cited by 67
Kobashi, K., Villmow, T., Andres, T. A., Häußler, L., & Pötschke, P. (2009) · Smart Materials and Structures · doi:10.1088/0964-1726/18/3/035008 · Cited by 67
Accelerated hydrolytic degradation of Poly(l-lactide)/Poly(d-lactide) stereocomplex up to late stage
Tsuji, H., & Tsuruno, T. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.01.008 · Cited by 67
Studies on crystallization kinetics of bimodal long chain branched polylactides
Bai, J., Fang, H., Zhang, Y., & Wang, Z. (2014) · CrystEngComm · doi:10.1039/c3ce42319k · Cited by 67
Effect of electrospinning parameters on the characterization of PLA/HNT nanocomposite fibers
Touny, A. H., Lawrence, J. G., Jones, A. D., & Bhaduri, S. B. (2010) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2010.0122 · Cited by 67
Arnold, P. L., Buffet, J., Blaudeck, R. P., Sujecki, S., & Wilson, C. (2009) · Chemistry - A European Journal · doi:10.1002/chem.200900522 · Cited by 67
Rangari, D., & Vasanthan, N. (2012) · Macromolecules · doi:10.1021/ma301482j · Cited by 60
Tumwesigye, K. S., Sousa, A. R., OLIVEIRA, J. C., & Sousa-Gallagher, M. J. (2017) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2017.04.007 · Cited by 67
The Antifungal Activity of Functionalized Chitin Nanocrystals in Poly (Lactid Acid) Films
Salaberria, A. M., Herrera, R., Andrés, M. A., Fernandes, S. C. M., & Labidi, J. (2017) · Materials · doi:10.3390/ma10050546 · Cited by 67
Zhao, H., Nathaniel, G. A., & Merenini, P. C. (2017) · RSC Advances · doi:10.1039/c7ra09038b · Cited by 67
Tsuji, H. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch21 · Cited by 67
Wang, B., Jin, Y., Kang, K., Yang, N., Weng, Y., Huang, Z., & Men, S. (2020) · e-Polymers · doi:10.1515/epoly-2020-0005 · Cited by 63
Aldás, M., Pavón, C., López, J., & Arrieta, M. P. (2020) · Applied Sciences · doi:10.3390/app10072561 · Cited by 67
Aliotta, L., Vannozzi, A., Panariello, L., Gigante, V., Coltelli, M.-B., & Lazzeri, A. (2020) · Polymers · doi:10.3390/polym12061366 · Cited by 61
Development of a Low-Cost EEG-Controlled Hand Exoskeleton 3D Printed on Textiles
de Araújo, R. S., Silva, C. R., Netto, S. P. N., Morya, E., & Brasil, F. L. (2021) · Frontiers in Neuroscience · doi:10.3389/fnins.2021.661569 · Cited by 67
Ajaj, Y., AL-Salman, H. N. K., Hussein, A. M., Jamee, M. K., Abdullaev, S. S., Omran, A. A., Karim, M. M., Abdulwahid, A. S., Mahmoud, Z. H., & Kianfar, E. (2024) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2024.100612 · Cited by 66
Metadata
- Authors
- Auras, R., Harte, B., & Selke, S.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Auras, Rafael
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2004-08-24
- Volume
- 4
- Issue
- 9
- Pages
- 835-864
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2054432898
- Cited by
- 3,454
- References
- 240
- Citations by year
- 2026: 160 · 2025: 172 · 2024: 191 · 2023: 196 · 2022: 237 · 2021: 258 · 2020: 202 · 2019: 204 · 2018: 191 · 2017: 227 · 2016: 198 · 2015: 212 · 2014: 183 · 2013: 185 · 2012: 149
- FWCI
- 2.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- polylactic acid, biodegradable packaging, PLA films, mechanical properties, glass transition temperature, water sorption, solubility parameter, gas permeability, barrier properties, food contact safety, bio-based polymers
- MeSH terms
- Biocompatible Materials, Biotechnology, Diffusion, Glass, Hot Temperature, Models, Chemical, Polyesters, Polymers, Solubility, Spectrophotometry, Temperature, Thermodynamics, Time Factors, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.