An Overview of Polylactides as Packaging Materials
The DOI matches its Crossref record; 245 of the 245 references it cites were found in a registry or an index.
Abstract
Summary: Polylactide polymers have gained enormous attention as a replacement for conventional synthetic packaging materials in the last decade. By being truly biodegradable, derived from renewable resources and by providing consumers with extra end‐use benefits such as avoiding paying the “green tax” in Germany or meeting environmental regulations in Japan, polylactides (PLAs) are a growing alternative as a packaging material for demanding markets. The aim of this paper is to review the production techniques for PLAs, summarize the main properties of PLA and to delineate the main advantages and disadvantages of PLA as a polymeric packaging material. PLA films have better ultraviolet light barrier properties than low density polyethylene (LDPE), but they are slightly worse than those of cellophane, polystyrene (PS) and poly(ethylene terephthalate) (PET). PLA films have mechanical properties comparable to those of PET and better than those of PS. PLA also has lower melting and glass transition temperatures than PET and PS. The glass transition temperature of PLA changes with time. Humidity between 10 and 95% and storage temperatures of 5 to 40 °C do not have an effect on the transition temperature of PLA, which can be explained by its low water sorption values (i.e. <100 ppm at A w = 1). PLA seals well at temperatures below the melting temperature but an appreciable shrinking of the films has been noted when the material is sealed near its melting temperature. Solubility parameter predictions indicate that PLA will interact with nitrogen compounds, anhydrides and some alcohols and that it will not interact with aromatic hydrocarbons, ketones, esters, sulfur compounds or water. The CO 2 , O 2 and water permeability coefficients of PLA are lower than those of PS and higher than those of PET. Its barrier to ethyl acetate and D ‐limonene is comparable to PET. The amount of lactic acid and its derivatives that migrate to food simulant solutions from PLA is much lower than any of the current average dietary lactic acid intake values allowed by several governmental agencies. Thus, PLA is safe for use in fabricating articles for contact with food. Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films. image Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For the sustained delivery of bioactive compounds, LA and glycolic acid were already proposed as bioresorbable matrices in 1973 [89].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [89]
In the citing paper
“However, the rate of the PLA crystallization is slow (Auras et al., 2004;Liu et al., 2014;Murariu et al., 2015;Zhang et al., 2018), frequently slower than the cooling rate used in common polymer processing devices (Zhang et al., 2018).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Therefore, commercial PLA's are semicrystalline with melting temperature, T m , between 140 and 180 • C in dependence on the enantiomeric purity (Fambri and Migliaresi, 2010) and glass transition temperature, T g , which usually ranges from 55 to 65 • C (Auras et al., 2004;Krishnan et al., 2016).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Some recent studies showed that, by adding bacteria and substrate-degrading enzymes for simultaneous saccharification and fermentation, starch or cellulosic biomass can be saccharified and simultaneously converted into lactic acid; this process can be used as a replacement for the above-mentioned traditional fermentation steps [28,29].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [28]
In the citing paper
“The relative reactivity towards the monomers is important for the formation of block copolymers which are typically produced by sequential addition. [19]”
From Master of Chaos and Order: Opposite Microstructures of PCL‐co‐PGA‐co‐PLA Accessible by a Single Catalyst** (2022) · cites this paper as [19]
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Research works printed but not linked: 65
- Aluminum Association, 1999, Tokyo Steps up to Recycling Efforts
- Mochizuki M., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 1
- Tsuji H., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 129
- Gruber P. R., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 235
- Kawahima N., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 251
- 10.1111/j.1574-6976.1995.tb00168.x · doi:10.1111/j.1574-6976.1995.tb00168.x · Paper page
- N.Whiteman “2000 Polymers Laminations and Coatings Conference” Chicago IL2000 p.631–635.
- J. B.Snook M.Sc. Thesis Michigan State University East Lansing1994 p.130.
- Perego G., 1996, Polymer, 59, 37
- M. H.Hartmann N.Whiteman “TAPPI Polymers Laminations & Coatings Conference” Chicago IL United States2000 p.467–474.
- Leaversuch R. D., 2003, Plastics Technology
- Baillie J., 1997, Packag. Week, 13
- O'Brien M., 2003, Ilip Launches New Fresh Food Packaging Solution
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- Kharas G. B., 1994, Plastics from Microbes, 93
- D. R.Witzke Ph.D. Thesis Michigan State University East Lansing MI1997 p.389.
- 10.1016/0032-3861(81)90256-1 · DOI
- 10.1016/0032-3861(95)93647-5 · DOI · Paper page
- Huang J., 1996, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 37, 370
- Rappard P., 1997, Packag. Rev. S. Afr., 23, 19
- Farrer K. T. H., 1983, Packag. News
- Dunkley W. L., 1963, Milk Dealer, 52, 52
- R.Auras Ph.D. Thesis Michigan State University East Lansing2004 p.268.
- VanKrevelen D. W., 1997, Properties of Polymers
- Ou X., 2003, ANTEC 2003, 1701
- Doi Y., 1994, Biodegradable Plastics and Polymers: Proceedings of the Third International Scientific Workshop on Biodegradable Plastics and Polymers, Osaka, Japan (Studies in Polymer Science, 12), 464
- J. R.Dorgan J.Randal J.Janzen D.Knauss B.Braun P.Gruber “Global Plastics Environmental Conference 2004” Detroit MI February 18–192004.
- Cargill‐Dow‐LLC, PLA Polymer 4042D – A NatureWorks Product. Biaxially Oriented Films – General Purpose
- D. M.Bigg “Annual Technical Conference – Society of Plastics Engineers” 1996 p.2028–2039.
- Barton A. F. M., 1999, Handbook of Solubility Parameters and Other Cohesion Parameters
- Hansen C. M., 1967, J. Paint Technol., 39, 511
- Rocha G., 1992, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 33, 454
- Pauly S., 1999, Polymer Handbook, 547
- Siparsky G. L., 1997, J. Environ. Polym. Degrad., 5, 125, 10.1007/bf02763656 · DOI · Paper page
- N.Whiteman P.DeLassus J.Gunderson “Polymers Laminations & Coatings Conference Proceeding Polyolefins 2002 International Conference on Polyolefins” Houston Texas USA February 24–27 2002.
- 10.1023/a:1021869530253 · doi:10.1023/a:1021869530253
- 10.1023/a:1021860301487 · doi:10.1023/a:1021860301487
- 10.1023/a:1022874530586 · doi:10.1023/a:1022874530586
- 10.1023/a:1022849813748 · doi:10.1023/a:1022849813748
- 10.1023/a:1021808317416 · DOI
- 10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s · doi:10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s
- 10.1016/0142-9612(90)90124-9 · DOI · Paper page
- 10.1023/a:1021812418325 · doi:10.1023/a:1021812418325
- 10.1002/app.11605 · DOI · Paper page
- 10.1023/a:1016036302871 · DOI
- R. G.Sinclair “The First Corn Utilization Conference” St. Louis Missouri June 11–12 1987 p.1–16.
- 10.1016/0032-3861(79)90009-0 · DOI · Paper page
- Park J. W., 1999, Korea Polym. J., 7, 93
- Kim H. S., 1998, Korea Polym. J., 6, 422
- 10.1016/0032-3861(96)83146-6 · DOI
- Farmaceutico S., 2003, Lactide/Glycolide Copolymers: Review on Toxicity, Biocompatibility, and Clinical Application (data up to 1999)
- Hartmann M. H., 1999, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 40, 570
- O'Brien M., 2003, Cargill Dow's World‐scale Manufacturing Facility Comes On Line
- O'Brien M., 2003, Biopolymer Industry Moves from Field of Dreams to Reality: Consumer Products Hitting Retail Shelves Across the Globe
- O'Brien M., 2003, First North American Converter Takes Aim at Grocery Industry with NatureWorks™ PLA
- O'Brien M., 2001, Unifi and Cargill Dow Provide Update on NatureWorks™ PLA Development, 2
- 2003, Faerch Plast to Market Food Packaging from Nature
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- NatureWorks™ PLA, 2003, Top It Off With NatureWorks™ PLA. Dairy and Delicatessen Container Lidding Solutions
- 2003, Kanebo Corn Fiber
- Lunt J., 2003, Polylactic Acid Polymers from Corn: Potential Applications in the Textiles Industry
- Arai K., 2001, Biodegradable Lactide and Polyester Copolymers for use in Packaging and Their Film Properties
- Mohan A. M., 2002, Packag. Digest, 30, 34
- Nageroni J., 2001, Flexible Packag., 25
- Michael O. B., 2003, Ilip Launches New Fresh Food Packaging Solution
Cited by
Items 201–300 of 1,031
Ameli, A., Nofar, M., Jahani, D., Rizvi, G., & Park, C. B. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.09.087 · Cited by 181
Naser, A. Z., Deiab, I., Defersha, F., & Yang, S. (2021) · Polymers · doi:10.3390/polym13234271 · Cited by 180
“Nonetheless, compared to poly(3-hydroxybutyrate) (P3HB or simply PHB) or Poly(εcaprolactone) (PCL), the biodegradability of PLA is considerably low [15,25,26].”
BackgroundApplying the Principles of Green Chemistry to Polymer Production Technology
Dubé, M. A., & Salehpour, S. (2014) · Macromolecular Reaction Engineering · doi:10.1002/mren.201300103 · Cited by 180
Effects of nano-/micro-sized additives on the crystallization behaviors of PLA and PLA/CO2 mixtures
Nofar, M., Tabatabaei, A., & Park, C. B. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.049 · Cited by 180
Kale, G., Auras, R., & Singh, S. P. (2007) · Packaging Technology and Science · doi:10.1002/pts.742 · Cited by 179
Self-citationOjijo, V., & Ray, S. S. (2015) · Polymer · doi:10.1016/j.polymer.2015.10.038 · Cited by 179
Metal‐Size Influence in Iso‐Selective Lactide Polymerization
Bakewell, C., White, A. J. P., Long, N. J., & Williams, C. K. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201403643 · Cited by 178
Sun, Y., Yang, L., Lu, X., & He, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05991c · Cited by 178
Kale, G., Auras, R., & Singh, S. P. (2006) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0015-6 · Cited by 176
Self-citationBadia, J. D., Strömberg, E., Karlsson, S., & Ribes-Greus, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.12.019 · Cited by 155
Avinc, O., & Khoddami, A. (2009) · Fibre Chemistry · doi:10.1007/s10692-010-9213-z · Cited by 175
Ding, W., Jahani, D., Chang, E., Alemdar, A., Park, C. B., & Sain, M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.003 · Cited by 175
Shekhar, N., & Mondal, A. (2024) · Polymer Bulletin · doi:10.1007/s00289-024-05252-7 · Cited by 174
Biodegradation of polymers in managing plastic waste — A review
Lim, B. K. H., & Thian, E. S. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.151880 · Cited by 173
Avérous, L., & Pollet, E. (2012) · Green Energy and Technology · doi:10.1007/978-1-4471-4108-2_2 · Cited by 172
Muller, J., González-Martínez, C., & Chiralt, A. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.07.019 · Cited by 172
“It was shown that crystalline PLA films obtained by compression moulding were the most transparent, with a Ti comparable to that of synthetic polymers, such as poly(ethylene terephthalate) (PET) and poly(styrene) (PS) [43].”
BackgroundEffect of dissolved CO2 on the crystallization behavior of linear and branched PLA
Nofar, M., Zhu, W., & Park, C. B. (2012) · Polymer · doi:10.1016/j.polymer.2012.04.054 · Cited by 171
Continuous Processing of Nanocellulose and Polylactic Acid into Multilayer Barrier Coatings
Koppolu, R., Lahti, J., Abitbol, T., Swerin, A., Kuusipalo, J., & Toivakka, M. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b00922 · Cited by 171
Murariu, M., Bonnaud, L., Yoann, P., Fontaine, G., Bourbigot, S., & Dubois, P. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.032 · Cited by 171
Processing and characterization of poly(lactic acid) films plasticized with commercial adipates
Martino, V. P., Jiménez, A., & Ruseckaite, R. A. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29784 · Cited by 149
Dynamic Mechanical Analysis Investigations of PLA-Based Renewable Materials: How Are They Useful?
Cristea, M., Ionita, D., & Iftime, M. M. (2020) · Materials · doi:10.3390/ma13225302 · Cited by 170
Ajellal, N., Lyubov, D. M., Sinenkov, M. A., Fukin, G. K., Cherkasov, A. V., Thomas, C. M., Carpentier, J., & Trifonov, A. A. (2008) · Chemistry – A European Journal · doi:10.1002/chem.200800288 · Cited by 170
Chen, H.-L., Dutta, S., Huang, P.-Y., & Lin, C.-C. (2012) · Organometallics · doi:10.1021/om201281w · Cited by 170
In vivo and Post-synthesis Strategies to Enhance the Properties of PHB-Based Materials: A Review
Turco, R., Santagata, G., Corrado, I., Pezzella, C., & Di Serio, M. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.619266 · Cited by 169
Kim, I., Viswanathan, K., Kasi, G., Sadeghi, K., Thanakkasaranee, S., & Seo, J. (2019) · Polymers · doi:10.3390/polym11091427 · Cited by 169
PLA architectures: the role of branching
Corneillie, S., & Smet, M. (2015) · Polymer Chemistry · doi:10.1039/c4py01572j · Cited by 169
Development of polylactide bead foams with double crystal melting peaks
Nofar, M., Ameli, A., & Park, C. B. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.048 · Cited by 169
Pötschke, P., Andres, T., Villmow, T., Pegel, S., Brünig, H., Kobashi, K., Fischer, D., & Häussler, L. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.11.005 · Cited by 169
Talc as a nucleating agent and reinforcing filler in poly(lactic acid) composites
Shakoor, A., & Thomas, N. L. (2014) · Polymer Engineering & Science · doi:10.1002/pen.23543 · Cited by 150
Gas permeation properties of poly(lactic acid) revisited
Bao, L., Dorgan, J. R., Knauss, D. M., Hait, S., Oliveira, N. S., & A, I. M. M. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.08.021 · Cited by 169
Pounder, R. J., & Dove, A. P. (2010) · Polymer Chemistry · doi:10.1039/b9py00327d · Cited by 168
A Bifunctional Monomer Derived from Lactide for Toughening Polylactide
Jing, F., & Hillmyer, M. A. (2008) · Journal of the American Chemical Society · doi:10.1021/ja804357u · Cited by 168
Choi, K.-M., Choi, M.-C., Han, D.-H., Park, T.-S., & Ha, C.-S. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.05.027 · Cited by 168
Toughening of Polylactide with Polymerized Soybean Oil
Robertson, M. L., Chang, K., Gramlich, W. M., & Hillmyer, M. A. (2010) · Macromolecules · doi:10.1021/ma9022795 · Cited by 157
Sanford, M. J., Peña Carrodeguas, L., Van Zee, N. J., Kleij, A. W., & Coates, G. W. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b01425 · Cited by 157
Present and Future of Biodegradable Polymers for Food Packaging Applications
Rydz, J., Musioł, M., Zawidlak-Węgrzyńska, B., & Sikorska, W. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-811449-0.00014-1 · Cited by 168
Polymeric Biomaterials for Scaffold-Based Bone Regenerative Engineering
Ogueri, K. S., Jafari, T., Ivirico, J. L. E., & Laurencin, C. T. (2018) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-018-0072-0 · Cited by 169
Song, J., Winkeljann, B., & Lieleg, O. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.202000850 · Cited by 168
A comprehensive review on fused deposition modelling of polylactic acid
Sandanamsamy, L., Harun, W. S. W., Ishak, I., Romlay, F. R. M., Kadirgama, K., Ramasamy, D., Idris, S. R. A., & Tsumori, F. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00356-w · Cited by 167
Lemmouchi, Y., Murariu, M., Santos, A. M. D., Amass, A. J., Schacht, E., & Dubois, P. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.07.006 · Cited by 167
PLA bioplastic production: From monomer to the polymer
Yu, J., Xu, S., Liu, B., Wang, H., Qiao, F., Ren, X., & Wei, Q. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112076 · Cited by 167
Notta‐Cuvier, D., Odent, J., Delille, R., Murariu, M., Lauro, F., Raquez, J., Bennani, B., & Dúbois, P. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.03.007 · Cited by 169
Van Zee, N. J., & Coates, G. W. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410641 · Cited by 154
Nizamuddin, S., Baloch, A. J., Chen, C., Arif, M., & Mubarak, N. M. (2024) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2024.105887 · Cited by 166
Multi-functional coating of cellulose nanocrystals for flexible packaging applications
Li, F., Biagioni, P., Bollani, M., Maccagnan, A., & Piergiovanni, L. (2013) · Cellulose · doi:10.1007/s10570-013-0015-3 · Cited by 166
Stoclet, G., Seguela, R., & Lefebvre, J.-M. (2011) · Polymer · doi:10.1016/j.polymer.2011.02.002 · Cited by 165
Rheology of poly (lactic acid)-based systems
Nofar, M., Salehiyan, R., & Sinha Ray, S. (2019) · Polymer Reviews · doi:10.1080/15583724.2019.1572185 · Cited by 165
Effect of graphene content on the properties of poly(lactic acid) nanocomposites
Valapa, R. B., Pugazhenthi, G., & Katiyar, V. (2015) · RSC Advances · doi:10.1039/c4ra15669b · Cited by 166
Courgneau, C., Domenek, S., Guinault, A., Avérous, L., & Ducruet, V. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0285-5 · Cited by 166
Advances, challenges, and prospects for surgical suture materials
Li, Y., Meng, Q., Chen, S., Ling, P., Kuss, M. A., Duan, B., & Wu, S. (2023) · Acta Biomaterialia · doi:10.1016/j.actbio.2023.07.041 · Cited by 164
Tsuji, H. (2013) · Bio‐Based Plastics · doi:10.1002/9781118676646.ch8 · Cited by 142
Mechanical properties and phase morphology of super-tough PLA/PBAT/EMA-GMA multicomponent blends
Wu, N., & Zhang, H. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.01.063 · Cited by 164
Application of fused deposition modeling (FDM) on bone scaffold manufacturing process: A review
Winarso, R., Anggoro, P. W., Ismail, R., Jamari, J., & Bayuseno, A. P. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e11701 · Cited by 163
Overview of Poly(lactic acid) (PLA) fibre
Avinç, O., & Khoddamı, A. (2010) · Fibre Chemistry · doi:10.1007/s10692-010-9226-7 · Cited by 163
Mechanistic Study of the Stereoselective Polymerization of d,l-Lactide Using Indium(III) Halides
Pietrangelo, A., Knight, S. C., Gupta, A. K., Yao, L. J., Hillmyer, M. A., & Tolman, W. B. (2010) · Journal of the American Chemical Society · doi:10.1021/ja103841h · Cited by 149
Oliveira, J. E., Moraes, E. A., Costa, R. G. F., Afonso, A. S., Mattoso, L. H. C., Orts, W. J., & Medeiros, E. S. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34410 · Cited by 162
Mechanical recycling of polylactide, upgrading trends and combination of valorization techniques
Badia, J. D., & Ribes-Greus, A. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.09.005 · Cited by 161
Photooxidation of polylactide/calcium sulphate composites
Gardette, M., Thérias, S., Gardette, J., Murariu, M., & Dúbois, P. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.12.023 · Cited by 161
Burgos, N., Tolaguera, D., Fiori, S., & Jiménez, A. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0628-5 · Cited by 160
Hu, L.-F., Zhang, C.-J., Wu, H.-L., Yang, J.-L., Liu, B., Duan, H.-Y., & Zhang, X.-H. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00499 · Cited by 160
Meng, B., Deng, J., Liu, Q., Wu, Z., & Yang, W. M. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.10.009 · Cited by 160
Li, F., Zhang, S., Liang, J., & Wang, J. (2015) · Polymers for Advanced Technologies · doi:10.1002/pat.3475 · Cited by 162
Iñiguez-Franco, F., Auras, R., Burgess, G., Holmes, D., Fang, X., Rubino, M., & Soto-Valdez, H. (2016) · Polymer · doi:10.1016/j.polymer.2016.07.018 · Cited by 159
Self-citationMicrocellular extrusion‐foaming of polylactide with chain‐extender
Pilla, S., Kim, S. G., Auer, G. K., Gong, S., & Park, C. B. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21385 · Cited by 159
Starch/PVA-based nanocomposites reinforced with bamboo nanofibrils
Guimarães, M., Botaro, V. R., Novack, K. M., Teixeira, F. G., & Tonoli, G. H. D. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.03.014 · Cited by 159
Lizundia, E., Vilas‐Vilela, J. L., & León, L. M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.01.054 · Cited by 159
Mascheroni, E., Guillard, V., Nalin, F., Mora, L., & Piergiovanni, L. (2010) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2009.12.028 · Cited by 159
Gregory, G. L., López-Vidal, E. M., & Buchard, A. (2017) · Chemical Communications · doi:10.1039/c6cc09578j · Cited by 147
Star-shaped and branched polylactides: Synthesis, characterization, and properties
Michalski, A., Brzezinski, M., Lapienis, G., & Biela, T. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.10.004 · Cited by 158
Dyer, H. E., Huijser, S., Susperregui, N., Bonnet, F., Schwarz, A. D., Duchateau, R., Maron, L., & Mountford, P. (2010) · Organometallics · doi:10.1021/om100513j · Cited by 158
Extrusion assisted by supercritical CO2: A review on its application to biopolymers
Chauvet, M., Sauceau, M., & Fages, J. (2017) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2016.05.043 · Cited by 158
Guo, Q., Fan, F., Pidko, E. A., van der Graaff, W. N. P., Feng, Z., Li, C., & Hensen, E. J. M. (2013) · ChemSusChem · doi:10.1002/cssc.201300160 · Cited by 158
Tsuji, H., Kawashima, Y., Takikawa, H., & Tanaka, S. (2007) · Polymer · doi:10.1016/j.polymer.2007.05.040 · Cited by 159
Functionalized cellulose nanocrystals as reinforcement in biodegradable polymer nanocomposites
Ferreira, F. V., Pinheiro, I. F., Gouveia, R. F., Thim, G. P., & Lona, L. M. F. (2017) · Polymer Composites · doi:10.1002/pc.24583 · Cited by 160
Nofar, M., Maani, A., Sojoudi, H., Heuzey, M. C., & Carreau, P. J. (2015) · Journal of Rheology · doi:10.1122/1.4905714 · Cited by 143
Recent Advances in the Application of Functionalized Lignin in Value-Added Polymeric Materials
Wang, Y., Meng, X., Pu, Y., & Ragauskas, A. J. (2020) · Polymers · doi:10.3390/polym12102277 · Cited by 157
Yang, H., Shi, B., Xue, Y., Ma, Z., Liu, L., Liu, L., Yu, Y., Zhang, Z., Annamalai, P. K., & Song, P. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.0c01656 · Cited by 157
Davachi, S. M., & Kaffashi, B. (2015) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2014.979507 · Cited by 156
“Later, according to that, different devices were developed([4]).”
BackgroundMethodInfluentialGigante, V., Canesi, I., Cinelli, P., Coltelli, M. B., & Lazzeri, A. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.03.015 · Cited by 156
A method for simultaneously improving the flame retardancy and toughness of PLA
Song, Y., Wang, D., Wang, X., Lin, L., & Wang, Y. (2010) · Polymers for Advanced Technologies · doi:10.1002/pat.1760 · Cited by 156
Wasanasuk, K., & Tashiro, K. (2011) · Macromolecules · doi:10.1021/ma2017666 · Cited by 141
Manzanarez-López, F., Soto‐Valdez, H., Auras, R. A., & Peralta, E. (2011) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2010.12.029 · Cited by 155
Self-citationPolysaccharide nanocrystals as fillers for PLA based nanocomposites
Scaffaro, R., Botta, L., Lopresti, F., Maio, A., & Sutera, F. (2016) · Cellulose · doi:10.1007/s10570-016-1143-3 · Cited by 157
Costes, L., Laoutid, F., Brohez, S., Delvosalle, C., & Dúbois, P. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.07.018 · Cited by 155
Limsukon, W., Rubino, M. I., Rabnawaz, M., Lim, L., & Auras, R. A. (2023) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2023.110537 · Cited by 155
Self-citationKuang, T., Mi, H., Fu, D., Jing, X., Chen, B., Mou, W.-J., & Peng, X. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/ie503434q · Cited by 154
Additive Manufacturing of Biomaterials—Design Principles and Their Implementation
Mirzaali, M. J., Moosabeiki, V., Rajaai, S. M., Zhou, J., & ZADPOOR, A. A. (2022) · Materials · doi:10.3390/ma15155457 · Cited by 155
Coltelli, M., Maggiore, I. D., Bertoldo, M., Signori, F., Bronco, S., & Ciardelli, F. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28512 · Cited by 135
Zhao, X., Yu, J., Liang, X., Huang, Z., Li, J., & Peng, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123581 · Cited by 154
Non‐Isothermal Crystallization Behavior of Poly(L‐lactic acid) in the Presence of Various Additives
Tsuji, H., Takai, H., Fukuda, N., & Takikawa, H. (2006) · Macromolecular Materials and Engineering · doi:10.1002/mame.200500371 · Cited by 134
Park, S., Lee, S. G., & Kim, S. H. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.10.011 · Cited by 152
Ahmad, A., BANAT, F. A., AlSafar, H. S., & Hasan, S. W. (2022) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-022-02581-3 · Cited by 153
Effect of natural weather on the structure and properties of polylactide/Cloisite 30B nanocomposites
Zaidi, L., Kaci, M., Bruzaud, S., Bourmaud, A., & Grohens, Y. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.05.014 · Cited by 150
Van Zee, N. J., Sanford, M. J., & Coates, G. W. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b12888 · Cited by 138
Photochemical Behavior of Polylactide/ZnO Nanocomposite Films
Thérias, S., Larché, J.-F., Bussière, P., Gardette, J., Murariu, M., & Dúbois, P. (2012) · Biomacromolecules · doi:10.1021/bm301071w · Cited by 151
Ahmed, J., Mulla, M. Z., & Arfat, Y. A. (2016) · Food Control · doi:10.1016/j.foodcont.2016.05.013 · Cited by 150
Physical and mechanical properties of PLA composites reinforced by TiO 2 grafted flax fibers
Foruzanmehr, M. R., Vuillaume, P. Y., Elkoun, S., & Robert, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.103 · Cited by 150
Ojijo, V., Sinha Ray, S., & Sadiku, R. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301842e · Cited by 144
Enhanced dispersion of cellulose nanocrystals in melt-processed polylactide-based nanocomposites
Arias, A., Heuzey, M., Huneault, M. A., Ausias, G., & Bendahou, A. (2014) · Cellulose · doi:10.1007/s10570-014-0476-z · Cited by 149
16 years research on lactic acid production with yeast – ready for the market?
Sauer, M., Porro, D., Mattanovich, D., & Branduardi, P. (2010) · Biotechnology and Genetic Engineering Reviews · doi:10.1080/02648725.2010.10648152 · Cited by 132
Metadata
- Authors
- Auras, R., Harte, B., & Selke, S.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Auras, Rafael
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2004-08-24
- Volume
- 4
- Issue
- 9
- Pages
- 835-864
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2054432898
- Cited by
- 3,454
- References
- 240
- Citations by year
- 2026: 160 · 2025: 172 · 2024: 191 · 2023: 196 · 2022: 237 · 2021: 258 · 2020: 202 · 2019: 204 · 2018: 191 · 2017: 227 · 2016: 198 · 2015: 212 · 2014: 183 · 2013: 185 · 2012: 149
- FWCI
- 2.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- polylactic acid, biodegradable packaging, PLA films, mechanical properties, glass transition temperature, water sorption, solubility parameter, gas permeability, barrier properties, food contact safety, bio-based polymers
- MeSH terms
- Biocompatible Materials, Biotechnology, Diffusion, Glass, Hot Temperature, Models, Chemical, Polyesters, Polymers, Solubility, Spectrophotometry, Temperature, Thermodynamics, Time Factors, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.