An Overview of Polylactides as Packaging Materials
The DOI matches its Crossref record; 245 of the 245 references it cites were found in a registry or an index.
Abstract
Summary: Polylactide polymers have gained enormous attention as a replacement for conventional synthetic packaging materials in the last decade. By being truly biodegradable, derived from renewable resources and by providing consumers with extra end‐use benefits such as avoiding paying the “green tax” in Germany or meeting environmental regulations in Japan, polylactides (PLAs) are a growing alternative as a packaging material for demanding markets. The aim of this paper is to review the production techniques for PLAs, summarize the main properties of PLA and to delineate the main advantages and disadvantages of PLA as a polymeric packaging material. PLA films have better ultraviolet light barrier properties than low density polyethylene (LDPE), but they are slightly worse than those of cellophane, polystyrene (PS) and poly(ethylene terephthalate) (PET). PLA films have mechanical properties comparable to those of PET and better than those of PS. PLA also has lower melting and glass transition temperatures than PET and PS. The glass transition temperature of PLA changes with time. Humidity between 10 and 95% and storage temperatures of 5 to 40 °C do not have an effect on the transition temperature of PLA, which can be explained by its low water sorption values (i.e. <100 ppm at A w = 1). PLA seals well at temperatures below the melting temperature but an appreciable shrinking of the films has been noted when the material is sealed near its melting temperature. Solubility parameter predictions indicate that PLA will interact with nitrogen compounds, anhydrides and some alcohols and that it will not interact with aromatic hydrocarbons, ketones, esters, sulfur compounds or water. The CO 2 , O 2 and water permeability coefficients of PLA are lower than those of PS and higher than those of PET. Its barrier to ethyl acetate and D ‐limonene is comparable to PET. The amount of lactic acid and its derivatives that migrate to food simulant solutions from PLA is much lower than any of the current average dietary lactic acid intake values allowed by several governmental agencies. Thus, PLA is safe for use in fabricating articles for contact with food. Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films. image Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For the sustained delivery of bioactive compounds, LA and glycolic acid were already proposed as bioresorbable matrices in 1973 [89].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [89]
In the citing paper
“However, the rate of the PLA crystallization is slow (Auras et al., 2004;Liu et al., 2014;Murariu et al., 2015;Zhang et al., 2018), frequently slower than the cooling rate used in common polymer processing devices (Zhang et al., 2018).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Therefore, commercial PLA's are semicrystalline with melting temperature, T m , between 140 and 180 • C in dependence on the enantiomeric purity (Fambri and Migliaresi, 2010) and glass transition temperature, T g , which usually ranges from 55 to 65 • C (Auras et al., 2004;Krishnan et al., 2016).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Some recent studies showed that, by adding bacteria and substrate-degrading enzymes for simultaneous saccharification and fermentation, starch or cellulosic biomass can be saccharified and simultaneously converted into lactic acid; this process can be used as a replacement for the above-mentioned traditional fermentation steps [28,29].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [28]
In the citing paper
“The relative reactivity towards the monomers is important for the formation of block copolymers which are typically produced by sequential addition. [19]”
From Master of Chaos and Order: Opposite Microstructures of PCL‐co‐PGA‐co‐PLA Accessible by a Single Catalyst** (2022) · cites this paper as [19]
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Research works printed but not linked: 65
- Aluminum Association, 1999, Tokyo Steps up to Recycling Efforts
- Mochizuki M., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 1
- Tsuji H., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 129
- Gruber P. R., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 235
- Kawahima N., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 251
- 10.1111/j.1574-6976.1995.tb00168.x · doi:10.1111/j.1574-6976.1995.tb00168.x · Paper page
- N.Whiteman “2000 Polymers Laminations and Coatings Conference” Chicago IL2000 p.631–635.
- J. B.Snook M.Sc. Thesis Michigan State University East Lansing1994 p.130.
- Perego G., 1996, Polymer, 59, 37
- M. H.Hartmann N.Whiteman “TAPPI Polymers Laminations & Coatings Conference” Chicago IL United States2000 p.467–474.
- Leaversuch R. D., 2003, Plastics Technology
- Baillie J., 1997, Packag. Week, 13
- O'Brien M., 2003, Ilip Launches New Fresh Food Packaging Solution
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- Kharas G. B., 1994, Plastics from Microbes, 93
- D. R.Witzke Ph.D. Thesis Michigan State University East Lansing MI1997 p.389.
- 10.1016/0032-3861(81)90256-1 · DOI
- 10.1016/0032-3861(95)93647-5 · DOI · Paper page
- Huang J., 1996, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 37, 370
- Rappard P., 1997, Packag. Rev. S. Afr., 23, 19
- Farrer K. T. H., 1983, Packag. News
- Dunkley W. L., 1963, Milk Dealer, 52, 52
- R.Auras Ph.D. Thesis Michigan State University East Lansing2004 p.268.
- VanKrevelen D. W., 1997, Properties of Polymers
- Ou X., 2003, ANTEC 2003, 1701
- Doi Y., 1994, Biodegradable Plastics and Polymers: Proceedings of the Third International Scientific Workshop on Biodegradable Plastics and Polymers, Osaka, Japan (Studies in Polymer Science, 12), 464
- J. R.Dorgan J.Randal J.Janzen D.Knauss B.Braun P.Gruber “Global Plastics Environmental Conference 2004” Detroit MI February 18–192004.
- Cargill‐Dow‐LLC, PLA Polymer 4042D – A NatureWorks Product. Biaxially Oriented Films – General Purpose
- D. M.Bigg “Annual Technical Conference – Society of Plastics Engineers” 1996 p.2028–2039.
- Barton A. F. M., 1999, Handbook of Solubility Parameters and Other Cohesion Parameters
- Hansen C. M., 1967, J. Paint Technol., 39, 511
- Rocha G., 1992, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 33, 454
- Pauly S., 1999, Polymer Handbook, 547
- Siparsky G. L., 1997, J. Environ. Polym. Degrad., 5, 125, 10.1007/bf02763656 · DOI · Paper page
- N.Whiteman P.DeLassus J.Gunderson “Polymers Laminations & Coatings Conference Proceeding Polyolefins 2002 International Conference on Polyolefins” Houston Texas USA February 24–27 2002.
- 10.1023/a:1021869530253 · doi:10.1023/a:1021869530253
- 10.1023/a:1021860301487 · doi:10.1023/a:1021860301487
- 10.1023/a:1022874530586 · doi:10.1023/a:1022874530586
- 10.1023/a:1022849813748 · doi:10.1023/a:1022849813748
- 10.1023/a:1021808317416 · DOI
- 10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s · doi:10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s
- 10.1016/0142-9612(90)90124-9 · DOI · Paper page
- 10.1023/a:1021812418325 · doi:10.1023/a:1021812418325
- 10.1002/app.11605 · DOI · Paper page
- 10.1023/a:1016036302871 · DOI
- R. G.Sinclair “The First Corn Utilization Conference” St. Louis Missouri June 11–12 1987 p.1–16.
- 10.1016/0032-3861(79)90009-0 · DOI · Paper page
- Park J. W., 1999, Korea Polym. J., 7, 93
- Kim H. S., 1998, Korea Polym. J., 6, 422
- 10.1016/0032-3861(96)83146-6 · DOI
- Farmaceutico S., 2003, Lactide/Glycolide Copolymers: Review on Toxicity, Biocompatibility, and Clinical Application (data up to 1999)
- Hartmann M. H., 1999, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 40, 570
- O'Brien M., 2003, Cargill Dow's World‐scale Manufacturing Facility Comes On Line
- O'Brien M., 2003, Biopolymer Industry Moves from Field of Dreams to Reality: Consumer Products Hitting Retail Shelves Across the Globe
- O'Brien M., 2003, First North American Converter Takes Aim at Grocery Industry with NatureWorks™ PLA
- O'Brien M., 2001, Unifi and Cargill Dow Provide Update on NatureWorks™ PLA Development, 2
- 2003, Faerch Plast to Market Food Packaging from Nature
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- NatureWorks™ PLA, 2003, Top It Off With NatureWorks™ PLA. Dairy and Delicatessen Container Lidding Solutions
- 2003, Kanebo Corn Fiber
- Lunt J., 2003, Polylactic Acid Polymers from Corn: Potential Applications in the Textiles Industry
- Arai K., 2001, Biodegradable Lactide and Polyester Copolymers for use in Packaging and Their Film Properties
- Mohan A. M., 2002, Packag. Digest, 30, 34
- Nageroni J., 2001, Flexible Packag., 25
- Michael O. B., 2003, Ilip Launches New Fresh Food Packaging Solution
Cited by
Items 401–500 of 1,031
Vogel, C., & Siesler, H. W. (2008) · Macromolecular Symposia · doi:10.1002/masy.200850520 · Cited by 120
Tang, H., Chen, J.-B., Wang, Y., Xu, J., Hsiao, B. S., Zhong, G., & Li, Z. (2012) · Biomacromolecules · doi:10.1021/bm3013617 · Cited by 120
Biopolymer-Based Composites: An Eco-Friendly Alternative from Agricultural Waste Biomass
Girijappa, Y. G. T., Sharath, B. N., Puttegowda, M., Verma, A., Rangappa, S. M., & Siengchin, S. (2023) · Journal of Composites Science · doi:10.3390/jcs7060242 · Cited by 119
Water vapour permeability of poly(lactic acid) nanocomposites
Duan, Z., Thomas, N. L., & Huang, W. B. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.06.008 · Cited by 119
Strong synergistic effects in PLA/PCL blends: impact of PLA matrix viscosity
Ostafinska, A., Fortelný, I., Hodan, J., Krejčíková, S., Nevoralová, M., Kredatusová, J., Kruliš, Z., Kotek, J., & Šlouf, M. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.01.015 · Cited by 118
La Mantia, F. P., Botta, L., Morreale, M., & Scaffaro, R. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.10.017 · Cited by 118
Yang, W., Dominici, F., Fortunati, E., Kenny, J. M., & Puglia, D. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.09.057 · Cited by 119
Compatibilization of PLA/PBAT blends by using Epoxy‐POSS
TÜCCAR, N. K., Can, B. N., Kodal, M., & Özkoç, G. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47217 · Cited by 118
Yüzay, I. E., Auras, R. A., Soto‐Valdez, H., & Selke, S. E. M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.05.011 · Cited by 119
Self-citationCharacterization and gas transport properties of poly(lactic acid) blend membranes
Komatsuka, T., Kusakabe, A., & Nagai, K. (2008) · Desalination · doi:10.1016/j.desal.2007.09.088 · Cited by 118
Effects of wood flour and chitosan on mechanical, chemical, and thermal properties of polylactide
Shah, B. L., Selke, S. E. M., Walters, M. B., & Heiden, P. A. (2008) · Polymer Composites · doi:10.1002/pc.20415 · Cited by 118
Self-citationSustainable Poly(lactide-b-butadiene) Multiblock Copolymers with Enhanced Mechanical Properties
Lee, I., Panthani, T. R., & Bates, F. S. (2013) · Macromolecules · doi:10.1021/ma401508b · Cited by 117
Interactions, structure and properties in poly(lactic acid)/thermoplastic polymer blends
Imre, B., Renner, K., & Pukanszky, B. (2014) · Express Polymer Letters · doi:10.3144/expresspolymlett.2014.2 · Cited by 105
Xu, J., Zhang, Z., Xu, H., Chen, J.-B., Ran, R., & Li, Z. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00462 · Cited by 117
Arrieta, M. P., Peponi, L., López, D., & Fernández‐García, M. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.10.042 · Cited by 117
Singhvi, M. S., Zendo, T., & Sonomoto, K. (2018) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-018-9092-4 · Cited by 118
Recent Progress on 3D‐Printed Polylactic Acid and Its Applications in Bone Repair
Chen, X., Chen, G., Wang, G., Zhu, P., & Gao, C. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201901065 · Cited by 117
Ghorbani, M., Divsalar, E., Molaei, R., Ezati, P., Moradi, M., Tajik, H., & Abbaszadeh, M. (2021) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2021.102864 · Cited by 117
Influence of carbon black on the properties of plasticized poly(lactic acid) composites
Wang, N., Zhang, X., Ma, X., & Jianming, F. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.03.023 · Cited by 118
Nofar, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.147 · Cited by 117
Poly(lactic acid) mass transfer properties
Sonchaeng, U., Iñiguez‐Franco, F., Auras, R. A., Selke, S. E. M., Rubino, M. I., & Lim, L. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.008 · Cited by 116
Self-citationMcKay, I., Vargas, J., Yang, L., & Felfel, R. M. (2024) · Materials · doi:10.3390/ma17194878 · Cited by 117
Aznar, M., Úbeda, S., Dreolin, N., & Nerín, C. (2018) · Journal of Chromatography A · doi:10.1016/j.chroma.2018.10.055 · Cited by 115
Li, L., Hashaikeh, R., & Arafat, H. A. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.02.037 · Cited by 115
Poly (lactic acid) fibre reinforced biodegradable composites
Jia, W., Gong, H., & Hogg, P. J. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.02.024 · Cited by 115
Singh, V., & Tiwari, M. (2010) · International Journal of Polymer Science · doi:10.1155/2010/652719 · Cited by 116
Nofar, M., Tabatabaei, A., Ameli, A., & Park, C. B. (2013) · Polymer · doi:10.1016/j.polymer.2013.09.044 · Cited by 114
Plasticizing effects of citrate esters on properties of poly(lactic acid)
Maiza, M., Benaniba, M. T., & Massardier, V. (2015) · Journal of Polymer Engineering · doi:10.1515/polyeng-2015-0140 · Cited by 115
Lule, Z. C., & Kim, J. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105506 · Cited by 115
A recent advancement on preparation, characterization and application of nanolignin
Hussin, M. H., Appaturi, J. N., Ng, E., Latif, N. H. A., Brosse, N., Ziegler‐Devin, I., Vahabi, H., Syamani, F. A., Fatrıasarı, W., Solihat, N. N., et al. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.01.007 · Cited by 114
Remarkable melting behavior of PLA stereocomplex in linear PLLA/PDLA blends
Shao, J., Xiang, S., Bian, X., Sun, J., Li, G., & Chen, X. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/ie504484b · Cited by 113
Song, P., Chen, G., Wei, Z., Chang, Y., Zhang, W., & Liang, J. (2012) · Polymer · doi:10.1016/j.polymer.2012.07.032 · Cited by 114
Borkotoky, S. S., Dhar, P., & Katiyar, V. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.08.036 · Cited by 113
New Chemistry in Functional Aliphatic Polyesters
Tong, R. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b00524 · Cited by 105
Flame retarded poly(lactic acid): A review
Chow, W. S., Teoh, E. L., & Karger-Kocsis, J. (2018) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2018.34 · Cited by 112
A Review of Polylactic Acid as a Replacement Material for Single-Use Laboratory Components
Freeland, B. H., McCarthy, É., Balakrishnan, R., Fahy, S., Boland, A. N., Rochfort, K. D., Dabros, M., Marti, R. E., Kelleher, S. M., & Gaughran, J. (2022) · Materials · doi:10.3390/ma15092989 · Cited by 114
Synthesis and characterization of isosorbide-based polyphosphonates as biobased flame-retardants
Mauldin, T. C., Zammarano, M., Gilman, J. W., Shields, J. R., & Boday, D. J. (2014) · Polymer Chemistry · doi:10.1039/c4py00591k · Cited by 112
Murariu, M., Ferreira, A. D. S., Degée, P., Alexandre, M., & Dúbois, P. (2007) · Polymer · doi:10.1016/j.polymer.2007.02.067 · Cited by 112
Jin, T. Z., & Gurtler, J. B. (2011) · Journal of Applied Microbiology · doi:10.1111/j.1365-2672.2011.04938.x · Cited by 112
Santoro, O., Zhang, X., & Redshaw, C. (2020) · Catalysts · doi:10.3390/catal10070800 · Cited by 111
Samuel, C., Cayuela, J., Barakat, I., Müller, A. J., Raquez, J.-M., & Dubois, P. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am403443m · Cited by 108
Isono, T., Kondo, Y., Otsuka, I., Nishiyama, Y., Borsali, R., Kakuchi, T., & Satoh, T. (2013) · Macromolecules · doi:10.1021/ma401375x · Cited by 108
Advances in bio-nanocomposite materials for food packaging: a review
Kumar, N., Kaur, P., & Bhatia, S. (2017) · Nutrition & Food Science · doi:10.1108/nfs-11-2016-0176 · Cited by 105
PLA-TiO2 nanocomposites: Thermal, morphological, structural, and humidity sensing properties
Mallick, S., Ahmad, Z., Touati, F., Bhadra, J., Shakoor, A., & Al-Thani, N. J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.06.068 · Cited by 111
Rojas, A., Velásquez, E., Vidal, C. P., Guarda, A., Galotto, M. J., & de Dicastillo, C. L. (2021) · Antioxidants · doi:10.3390/antiox10121976 · Cited by 111
Synthesis of Polymandelide: A Degradable Polylactide Derivative with Polystyrene-like Properties
Liu, T., Simmons, T. L., Bohnsack, D. A., Mackay, M. E., Smith, M. R., & Baker, G. L. (2007) · Macromolecules · doi:10.1021/ma061839n · Cited by 115
Cellulose/phosphorus combinations for sustainable fire retarded polylactide
Costes, L., Laoutid, F., Khelifa, F., Rose, G., Brohez, S., Delvosalle, C., & Dúbois, P. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.11.030 · Cited by 110
Mistriotis, A. D., Briassoulis, D., Giannoulis, A., & D’Aquino, S. (2015) · Postharvest Biology and Technology · doi:10.1016/j.postharvbio.2015.09.022 · Cited by 110
Effect of the molecular weight on the crystallinity of PCL-b-PLLA di-block copolymers
Peponi, L., Navarro-Baena, I., Báez, J. E., Kenny, J. M., & Marcos-Fernández, A. (2012) · Polymer · doi:10.1016/j.polymer.2012.07.066 · Cited by 109
Jones, M. D., Hancock, S. L., McKeown, P., Schäfer, P. M., Buchard, A., Thomas, L. H., Mahon, M. F., & Lowe, J. P. (2014) · Chem. Commun. · doi:10.1039/c4cc07871c · Cited by 109
Jones, M. D., Brady, L., McKeown, P., Buchard, A., Schäfer, P. M., Thomas, L. H., Mahon, M. F., Woodman, T. J., & Lowe, J. P. (2015) · Chemical Science · doi:10.1039/c5sc01819f · Cited by 98
Improving cellulose nanofibrillation of non-wood fiber using alkaline and bleaching pre-treatments
Fonseca, A. D. S., Panthapulakkal, S., Konar, S. K., Sain, M. M., Bufalino, L., Raabe, J., Miranda, Í. P. D. A., Martins, M. A., & Tonoli, G. H. D. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.01.046 · Cited by 109
Xiu, H., Bai, H. W., Huang, C. M., Xu, C. L., Li, X. Y., & Fu, Q. (2013) · Express Polymer Letters · doi:10.3144/expresspolymlett.2013.24 · Cited by 103
Song, A. Y., Oh, Y. A., Roh, S. H., Kim, J. H., & Min, S. C. (2015) · Journal of Food Science · doi:10.1111/1750-3841.13172 · Cited by 109
Ji, G., Zhai, W., Lin, D., Ren, Q., Zheng, W., & Jung, D. W. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie302281c · Cited by 108
Sustainability of Synthetic Plastics: Considerations in Materials Life-Cycle Management
Epps, T. H. I., Korley, L. T. J., Yan, T., Beers, K. L., & Burt, T. M. (2021) · JACS Au · doi:10.1021/jacsau.1c00191 · Cited by 108
Graphene modifications in polylactic acid nanocomposites: a review
Norazlina, H., & Kamal, Y. (2015) · Polymer Bulletin · doi:10.1007/s00289-015-1308-5 · Cited by 109
Pascual, A., Sardon, H., Veloso, A., Ruipérez, F., & Mecerreyes, D. (2014) · ACS Macro Letters · doi:10.1021/mz500401u · Cited by 98
Catalytic metal-based systems for controlled statistical copolymerisation of lactide with a lactone
Stirling, E., Champouret, Y., & Visseaux, M. (2018) · Polymer Chemistry · doi:10.1039/c8py00310f · Cited by 99
Feng, X., Kawabata, K., Kaufman, G., Elimelech, M., & Osuji, C. O. (2017) · ACS Nano · doi:10.1021/acsnano.7b00304 · Cited by 107
Compatible blends of biorelated polyesters through catalytic transesterification in the melt
Coltelli, M., Toncelli, C., Ciardelli, F., & Bronco, S. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.01.028 · Cited by 109
Biodegradable trays of thermoplastic starch/poly (lactic acid) coated with beeswax
Reis, M. O., Olivato, J. B., Bilck, A. P., Zanela, J., Grossmann, M. V. E., & Yamashita, F. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.12.045 · Cited by 107
Arrieta, M. P., López, J., López, D., Kenny, J. M., & Peponi, L. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.02.027 · Cited by 106
PLLA/PMMA blends: A shear-induced miscibility with tunable morphologies and properties?
Samuel, C., Raquez, J., & Dúbois, P. (2013) · Polymer · doi:10.1016/j.polymer.2013.05.021 · Cited by 106
Bhasney, S. M., Patwa, R., Kumar, A., & Katiyar, V. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45390 · Cited by 106
Migration of oligomers from a food contact biopolymer based on polylactic acid (PLA) and polyester
Úbeda, S., Aznar, M., Alfaro, P., & Nerín, C. (2019) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-019-01831-0 · Cited by 106
Advanced nanocellulose-based gas barrier materials: Present status and prospects
Wu, Y., Liang, Y., Mei, C., Cai, L., Nadda, A., Le, Q. V., Peng, Y., Lam, S. S., Sonne, C., & Xia, C. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131891 · Cited by 106
Linear and Branched Architectures from the Polymerization of Lactide with Glycidol
Pitet, L. M., Hait, S. B., Lanyk, T. J., & Knauss, D. M. (2007) · Macromolecules · doi:10.1021/ma0618068 · Cited by 93
Pitet, L. M., & Hillmyer, M. A. (2009) · Macromolecules · doi:10.1021/ma900368a · Cited by 86
Restrepo, I., Medina, C., Meruane, V., Akbari‐Fakhrabadi, A., Flores, P., & Rodríguez‐Llamazares, S. (2018) · Polímeros · doi:10.1590/0104-1428.03117 · Cited by 106
Puchalski, M., Kwolek, S., Szparaga, G., Chrzanowski, M., & Krucińska, I. (2017) · Polymers · doi:10.3390/polym9010018 · Cited by 99
Effect of crystallization on barrier properties of formulated polylactide
Courgneau, C., Domenek, Lebossé, R., Guinault, A., Avérous, L., & Ducruet, V. (2012) · Polymer International · doi:10.1002/pi.3167 · Cited by 91
Effect of plasma treatment on hydrophobicity and barrier property of polylactic acid
Chaiwong, C., Rachtanapun, P., Wongchaiya, P., Auras, R. A., & Boonyawan, D. (2010) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2010.02.048 · Cited by 105
Self-citationHufenus, R., Reifler, F. A., Maniura‐Weber, K., Spierings, A. B., & Zinn, M. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100063 · Cited by 105
¿What is the new about food packaging material? A bibliometric review during 1996–2016
Rojas, A. R., ospina, A. A., Vélez, P. R., & Flórez, R. A. (2019) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2019.01.016 · Cited by 104
Zhao, Y., Zhu, B., Wang, Y., Liu, C., & Shen, C. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.110041 · Cited by 91
Nofar, M., Salehiyan, R., & Ray, S. S. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108845 · Cited by 104
Xie, R. J., Zhang, Y., Yang, G., Zhu, X., Li, B., & Wu, G. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202104981 · Cited by 104
Intumescent polylactide: A nonflammable material
Fontaine, G., & Bourbigot, S. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30379 · Cited by 104
Karst, D., & Yang, Y. (2006) · Polymer · doi:10.1016/j.polymer.2006.05.002 · Cited by 105
Characterization of antimicrobial polylactic acid based films
Erdohan, Z. Ö., ÇAM, B. A., & Turhan, K. N. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.05.043 · Cited by 103
Usage of Potential Micro-organisms for Degradation of Plastics
Rana, K. I. (2019) · Open Journal of Environmental Biology · doi:10.17352/ojeb.000010 · Cited by 104
Sargassum inspired, optimized calcium alginate bioplastic composites for food packaging
Mohammed, A., Gaduan, A. N., Chaitram, P., Pooran, A., Lee, K., & Ward, K. (2022) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2022.108192 · Cited by 103
Guillaume, S. M., & Carpentier, J.-F. (2012) · Catalysis Science & Technology · doi:10.1039/c2cy00507g · Cited by 102
Lokesh, K., Matharu, A. S., Kookos, I. K., Ladakis, D., Koutinas, A., Morone, P., & Clark, J. H. (2020) · Green Chemistry · doi:10.1039/c9gc02992c · Cited by 102
An overview of the recent advances in polylactide‐based sustainable nanocomposites
Banerjee, R., & Ray, S. S. (2021) · Polymer Engineering and Science · doi:10.1002/pen.25623 · Cited by 102
Algal biopolymers as sustainable resources for a net-zero carbon bioeconomy
Mohan, A. A., Antony, A. R., Greeshma, K., Yun, J., Ramanan, R., & Kim, H.-S. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.126397 · Cited by 102
Water Clustering in Glassy Polymers
Davis, E. M., & Elabd, Y. A. (2013) · The Journal of Physical Chemistry B · doi:10.1021/jp405388d · Cited by 102
Biodegradable poly(lactic acid)-based scaffolds: synthesis and biomedical applications
Ghalia, M. A., & Dahman, Y. (2017) · Journal of Polymer Research · doi:10.1007/s10965-017-1227-2 · Cited by 102
Hygrothermal ageing of reprocessed polylactide
Badia-Valiente, J. D., Santonja‐Blasco, L., Martínez-Felipe, A., & Ribes-Greus, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.001 · Cited by 101
Pang, X., Duan, R., Li, X., Hu, C., Wang, X., & Chen, X. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02662 · Cited by 100
Production of ergothioneine by Methylobacterium species
Alamgir, K. M., Masuda, S., Fujitani, Y., Fukuda, F., & Tani, A. (2015) · Frontiers in Microbiology · doi:10.3389/fmicb.2015.01185 · Cited by 100
Palai, B., Mohanty, S., & Nayak, S. K. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02055-z · Cited by 100
Poly(lactic acid) and Its Blends for Packaging Application: A Review
Luca, S. D., Milanese, D., Nottiani, D. G., Cavazza, A., & Sciancalepore, C. (2023) · Clean Technologies · doi:10.3390/cleantechnol5040066 · Cited by 100
Sustainable and biodegradable polymer packaging: Perspectives, challenges, and opportunities
Teixeira, S. C., de Oliveira, T. V., Soares, N. D. F. F., & Raymundo‐Pereira, P. A. (2024) · Food Chemistry · doi:10.1016/j.foodchem.2024.142652 · Cited by 100
Iñiguez‐Franco, F., Soto‐Valdez, H., Peralta, E., Ayala-Zavala, J. F., Auras, R. A., & Gámez‐Meza, N. (2012) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf300668u · Cited by 100
Self-citationPillai, C. K. S. (2010) · Designed Monomers and Polymers · doi:10.1163/138577210x12634696333190 · Cited by 92
Blake, M. P., Schwarz, A. D., & Mountford, P. (2011) · Organometallics · doi:10.1021/om101166s · Cited by 84
Bandini, F., Frache, A., Ferrarini, A., Taskin, E., Cocconcelli, P. S., & Puglisi, E. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01791-y · Cited by 101
Tsuji, H., Saeki, T., Tsukegi, T., Daimon, H., & Fujie, K. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.06.009 · Cited by 99
Metadata
- Authors
- Auras, R., Harte, B., & Selke, S.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Auras, Rafael
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2004-08-24
- Volume
- 4
- Issue
- 9
- Pages
- 835-864
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2054432898
- Cited by
- 3,454
- References
- 240
- Citations by year
- 2026: 160 · 2025: 172 · 2024: 191 · 2023: 196 · 2022: 237 · 2021: 258 · 2020: 202 · 2019: 204 · 2018: 191 · 2017: 227 · 2016: 198 · 2015: 212 · 2014: 183 · 2013: 185 · 2012: 149
- FWCI
- 2.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- polylactic acid, biodegradable packaging, PLA films, mechanical properties, glass transition temperature, water sorption, solubility parameter, gas permeability, barrier properties, food contact safety, bio-based polymers
- MeSH terms
- Biocompatible Materials, Biotechnology, Diffusion, Glass, Hot Temperature, Models, Chemical, Polyesters, Polymers, Solubility, Spectrophotometry, Temperature, Thermodynamics, Time Factors, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.