An Overview of Polylactides as Packaging Materials
The DOI matches its Crossref record; 245 of the 245 references it cites were found in a registry or an index.
Abstract
Summary: Polylactide polymers have gained enormous attention as a replacement for conventional synthetic packaging materials in the last decade. By being truly biodegradable, derived from renewable resources and by providing consumers with extra end‐use benefits such as avoiding paying the “green tax” in Germany or meeting environmental regulations in Japan, polylactides (PLAs) are a growing alternative as a packaging material for demanding markets. The aim of this paper is to review the production techniques for PLAs, summarize the main properties of PLA and to delineate the main advantages and disadvantages of PLA as a polymeric packaging material. PLA films have better ultraviolet light barrier properties than low density polyethylene (LDPE), but they are slightly worse than those of cellophane, polystyrene (PS) and poly(ethylene terephthalate) (PET). PLA films have mechanical properties comparable to those of PET and better than those of PS. PLA also has lower melting and glass transition temperatures than PET and PS. The glass transition temperature of PLA changes with time. Humidity between 10 and 95% and storage temperatures of 5 to 40 °C do not have an effect on the transition temperature of PLA, which can be explained by its low water sorption values (i.e. <100 ppm at A w = 1). PLA seals well at temperatures below the melting temperature but an appreciable shrinking of the films has been noted when the material is sealed near its melting temperature. Solubility parameter predictions indicate that PLA will interact with nitrogen compounds, anhydrides and some alcohols and that it will not interact with aromatic hydrocarbons, ketones, esters, sulfur compounds or water. The CO 2 , O 2 and water permeability coefficients of PLA are lower than those of PS and higher than those of PET. Its barrier to ethyl acetate and D ‐limonene is comparable to PET. The amount of lactic acid and its derivatives that migrate to food simulant solutions from PLA is much lower than any of the current average dietary lactic acid intake values allowed by several governmental agencies. Thus, PLA is safe for use in fabricating articles for contact with food. Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films. image Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For the sustained delivery of bioactive compounds, LA and glycolic acid were already proposed as bioresorbable matrices in 1973 [89].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [89]
In the citing paper
“However, the rate of the PLA crystallization is slow (Auras et al., 2004;Liu et al., 2014;Murariu et al., 2015;Zhang et al., 2018), frequently slower than the cooling rate used in common polymer processing devices (Zhang et al., 2018).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Therefore, commercial PLA's are semicrystalline with melting temperature, T m , between 140 and 180 • C in dependence on the enantiomeric purity (Fambri and Migliaresi, 2010) and glass transition temperature, T g , which usually ranges from 55 to 65 • C (Auras et al., 2004;Krishnan et al., 2016).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Some recent studies showed that, by adding bacteria and substrate-degrading enzymes for simultaneous saccharification and fermentation, starch or cellulosic biomass can be saccharified and simultaneously converted into lactic acid; this process can be used as a replacement for the above-mentioned traditional fermentation steps [28,29].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [28]
In the citing paper
“The relative reactivity towards the monomers is important for the formation of block copolymers which are typically produced by sequential addition. [19]”
From Master of Chaos and Order: Opposite Microstructures of PCL‐co‐PGA‐co‐PLA Accessible by a Single Catalyst** (2022) · cites this paper as [19]
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Research works printed but not linked: 65
- Aluminum Association, 1999, Tokyo Steps up to Recycling Efforts
- Mochizuki M., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 1
- Tsuji H., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 129
- Gruber P. R., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 235
- Kawahima N., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 251
- 10.1111/j.1574-6976.1995.tb00168.x · doi:10.1111/j.1574-6976.1995.tb00168.x · Paper page
- N.Whiteman “2000 Polymers Laminations and Coatings Conference” Chicago IL2000 p.631–635.
- J. B.Snook M.Sc. Thesis Michigan State University East Lansing1994 p.130.
- Perego G., 1996, Polymer, 59, 37
- M. H.Hartmann N.Whiteman “TAPPI Polymers Laminations & Coatings Conference” Chicago IL United States2000 p.467–474.
- Leaversuch R. D., 2003, Plastics Technology
- Baillie J., 1997, Packag. Week, 13
- O'Brien M., 2003, Ilip Launches New Fresh Food Packaging Solution
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- Kharas G. B., 1994, Plastics from Microbes, 93
- D. R.Witzke Ph.D. Thesis Michigan State University East Lansing MI1997 p.389.
- 10.1016/0032-3861(81)90256-1 · DOI
- 10.1016/0032-3861(95)93647-5 · DOI · Paper page
- Huang J., 1996, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 37, 370
- Rappard P., 1997, Packag. Rev. S. Afr., 23, 19
- Farrer K. T. H., 1983, Packag. News
- Dunkley W. L., 1963, Milk Dealer, 52, 52
- R.Auras Ph.D. Thesis Michigan State University East Lansing2004 p.268.
- VanKrevelen D. W., 1997, Properties of Polymers
- Ou X., 2003, ANTEC 2003, 1701
- Doi Y., 1994, Biodegradable Plastics and Polymers: Proceedings of the Third International Scientific Workshop on Biodegradable Plastics and Polymers, Osaka, Japan (Studies in Polymer Science, 12), 464
- J. R.Dorgan J.Randal J.Janzen D.Knauss B.Braun P.Gruber “Global Plastics Environmental Conference 2004” Detroit MI February 18–192004.
- Cargill‐Dow‐LLC, PLA Polymer 4042D – A NatureWorks Product. Biaxially Oriented Films – General Purpose
- D. M.Bigg “Annual Technical Conference – Society of Plastics Engineers” 1996 p.2028–2039.
- Barton A. F. M., 1999, Handbook of Solubility Parameters and Other Cohesion Parameters
- Hansen C. M., 1967, J. Paint Technol., 39, 511
- Rocha G., 1992, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 33, 454
- Pauly S., 1999, Polymer Handbook, 547
- Siparsky G. L., 1997, J. Environ. Polym. Degrad., 5, 125, 10.1007/bf02763656 · DOI · Paper page
- N.Whiteman P.DeLassus J.Gunderson “Polymers Laminations & Coatings Conference Proceeding Polyolefins 2002 International Conference on Polyolefins” Houston Texas USA February 24–27 2002.
- 10.1023/a:1021869530253 · doi:10.1023/a:1021869530253
- 10.1023/a:1021860301487 · doi:10.1023/a:1021860301487
- 10.1023/a:1022874530586 · doi:10.1023/a:1022874530586
- 10.1023/a:1022849813748 · doi:10.1023/a:1022849813748
- 10.1023/a:1021808317416 · DOI
- 10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s · doi:10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s
- 10.1016/0142-9612(90)90124-9 · DOI · Paper page
- 10.1023/a:1021812418325 · doi:10.1023/a:1021812418325
- 10.1002/app.11605 · DOI · Paper page
- 10.1023/a:1016036302871 · DOI
- R. G.Sinclair “The First Corn Utilization Conference” St. Louis Missouri June 11–12 1987 p.1–16.
- 10.1016/0032-3861(79)90009-0 · DOI · Paper page
- Park J. W., 1999, Korea Polym. J., 7, 93
- Kim H. S., 1998, Korea Polym. J., 6, 422
- 10.1016/0032-3861(96)83146-6 · DOI
- Farmaceutico S., 2003, Lactide/Glycolide Copolymers: Review on Toxicity, Biocompatibility, and Clinical Application (data up to 1999)
- Hartmann M. H., 1999, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 40, 570
- O'Brien M., 2003, Cargill Dow's World‐scale Manufacturing Facility Comes On Line
- O'Brien M., 2003, Biopolymer Industry Moves from Field of Dreams to Reality: Consumer Products Hitting Retail Shelves Across the Globe
- O'Brien M., 2003, First North American Converter Takes Aim at Grocery Industry with NatureWorks™ PLA
- O'Brien M., 2001, Unifi and Cargill Dow Provide Update on NatureWorks™ PLA Development, 2
- 2003, Faerch Plast to Market Food Packaging from Nature
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- NatureWorks™ PLA, 2003, Top It Off With NatureWorks™ PLA. Dairy and Delicatessen Container Lidding Solutions
- 2003, Kanebo Corn Fiber
- Lunt J., 2003, Polylactic Acid Polymers from Corn: Potential Applications in the Textiles Industry
- Arai K., 2001, Biodegradable Lactide and Polyester Copolymers for use in Packaging and Their Film Properties
- Mohan A. M., 2002, Packag. Digest, 30, 34
- Nageroni J., 2001, Flexible Packag., 25
- Michael O. B., 2003, Ilip Launches New Fresh Food Packaging Solution
Cited by
Items 801–900 of 1,031
Guimarães, M., Botaro, V. R., Novack, K. M., Teixeira, F. G., & Tonoli, G. H. D. (2015) · Journal of Polymer Research · doi:10.1007/s10965-015-0834-z · Cited by 66
Compostable Polymer Properties and Packaging Applications
Rudnik, E. (2012) · Elsevier eBooks · doi:10.1016/b978-1-4557-3112-1.00013-2 · Cited by 67
Zhang, B., Sun, B., Bian, X., Li, G., & Chen, X. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b03151 · Cited by 64
Li, Y., Mi, J., Fu, H., Zhou, H., & Wang, X. (2019) · ACS Omega · doi:10.1021/acsomega.9b01620 · Cited by 66
Miao, L., Walton, W. C., Wang, L., Li, L., & Wang, Y. (2019) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2019.100388 · Cited by 66
Noivoil, N., & Yoksan, R. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49675 · Cited by 66
Stoclet, G., Séguéla, R., Lefebvre, J., Li, S., & Vert, M. (2011) · Macromolecules · doi:10.1021/ma200469t · Cited by 66
Alkaline and Enzymatic Degradation of L‐Lactide Copolymers, 1
Tsuji, H., & Tezuka, Y. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200400154 · Cited by 65
Ring-opening polymerization of cyclic esters initiated by zirconium, titanium and yttrium complexes
Tsai, C., Du, H.-C., Chang, J., Huang, B., Ko, B., & Lin, C. (2014) · RSC Advances · doi:10.1039/c4ra00201f · Cited by 65
Úbeda, S., Aznar, M., & Nerín, C. (2019) · Food Chemistry · doi:10.1016/j.foodchem.2019.05.069 · Cited by 65
Kim, K. H., Nam, J., Choi, J., Seo, M., & Bang, J. (2022) · Polymer Chemistry · doi:10.1039/d2py00126h · Cited by 65
Effect of active phenolic acids on properties of PLA-PHBV blend films
Hernández-García, E., Vargas, M., & Chiralt, A. (2022) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2022.100894 · Cited by 65
Martínez‐Sanz, M., Abdelwahab, M. A., López‐Rubio, A., Lagaron, J. M., Chiellini, E., Williams, T., Wood, D. F., Orts, W. J., & Imam, S. H. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.04.035 · Cited by 66
Shayan, M., Azizi, H., Ghasemi, I., & Karrabi, M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.02.001 · Cited by 65
Recent Progress in Gas Barrier Thin Film Coatings on PET Bottles in Food and Beverage Applications
Nakaya, M., Uedono, A., & Hotta, A. (2015) · Coatings · doi:10.3390/coatings5040987 · Cited by 65
Gwon, J., Cho, H.-J., Chun, S., Lee, S. I., Wu, Q., Li, M., & Lee, S.-Y. (2016) · RSC Advances · doi:10.1039/c6ra10993d · Cited by 65
Light and gas barrier properties of PLLA/metallic nanoparticles composite films
Lizundia, E., Vilas‐Vilela, J. L., Sangroniz, A., & Etxeberria, A. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.03.043 · Cited by 65
Controlled Photoredox Ring-Opening Polymerization of O-Carboxyanhydrides
Feng, Q., & Tong, R. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01462 · Cited by 65
Guimarães, M., Teixeira, F. G., & Tonoli, G. H. D. (2018) · Cellulose · doi:10.1007/s10570-018-1691-9 · Cited by 65
Hu, G., Cai, S., Zhou, Y., Zhang, N., & Ren, J. (2018) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684418765085 · Cited by 65
Ranjan, N., Singh, R., Ahuja, I. S., & Singh, J. (2018) · Springer eBooks · doi:10.1007/978-3-319-91713-9_11 · Cited by 65
Cellulose modified by citric acid reinforced Poly(lactic acid) resin as fillers
Cui, X., Ozaki, A., Asoh, T., & Uyama, H. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109118 · Cited by 65
Cerro, D., Bustos, G. A., Villegas, C., Buendia, N., Truffa, G., Godoy, M. P., Rodríguez, F. J., Rojas, A., Galotto, M. J., Constandil, L., et al. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.11.140 · Cited by 65
Evaluation of cotton byproducts as fillers for poly(lactic acid) and low density polyethylene
Sutivisedsak, N., CHENG, H. N., Dowd, M. K., Selling, G. W., & Biswas, A. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.08.016 · Cited by 65
Tabthong, S., Nanok, T., Sumrit, P., Kongsaeree, P., Prabpai, S., Chuawong, P., & Hormnirun, P. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b01381 · Cited by 64
Schäfer, P. M., & Herres‐Pawlis, S. (2020) · ChemPlusChem · doi:10.1002/cplu.202000252 · Cited by 64
Malafaia, G., Nascimento, Í. F., Estrela, F. N., Guimarães, A. T. B., Ribeiro, F., da Luz, T. M., & Rodrigues, A. S. D. L. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.146994 · Cited by 64
RetractedKinetics of the Thermal Degradation of Poly(lactic acid) and Polyamide Bioblends
Carrasco, F., Pérez, O. O. S., & Rulduà, M. L. M. (2021) · Polymers · doi:10.3390/polym13223996 · Cited by 64
Velázquez-Contreras, F., Zamora‐Ledezma, C., López-Gónzalez, I., Meseguer‐Olmo, L., Núñez‐Delicado, E., & Gabaldón, J. A. (2021) · Polymers · doi:10.3390/polym14010104 · Cited by 64
Strong and biodegradable films from avocado peel fiber
Ahmed, S., & Janaswamy, S. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.116926 · Cited by 64
Tetrazine‐Norbornene Click Reactions to Functionalize Degradable Polymers Derived from Lactide
Barker, I. A., Hall, D. J., Hansell, C. F., Prez, F. D., O’Reilly, R. K., & Dove, A. P. (2011) · Macromolecular Rapid Communications · doi:10.1002/marc.201100324 · Cited by 64
Effect of nucleating agents on the crystallization behavior and heat resistance of poly( l ‐lactide)
Zhang, X., Meng, L., Li, G., Liang, N., Zhang, J., Zhu, Z., & Wang, R. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42999 · Cited by 64
Polyglycolide as a Biodegradable Nucleating Agent for Poly( L ‐lactide)
Tsuji, H., Tashiro, K., Bouapao, L., & Narita, J. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200800217 · Cited by 64
Zhu, Y., Buonocore, G. G., Lavorgna, M., & Ambrosio, L. (2011) · Polymer Composites · doi:10.1002/pc.21068 · Cited by 64
Lipase-catalyzed synthesis of poly-l-lactide using supercritical carbon dioxide
García‐Arrazola, R., López-Guerrero, D. A., Gimeno, M., & Bárzana, E. (2009) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2009.08.014 · Cited by 64
Cruz-Zúñiga, J. M., Soto‐Valdez, H., Peralta, E., Wilson, A. M. M., Robles-Burgueño, M. R., Auras, R. A., & Gámez‐Meza, N. (2016) · Food Chemistry · doi:10.1016/j.foodchem.2016.02.130 · Cited by 64
Self-citationLevulinic Acid as a Versatile Building Block for Plasticizer Design
Xuan, W., Hakkarainen, M., & Odelius, K. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b02439 · Cited by 64
Soto‐Valdez, H., Auras, R. A., & Peralta, E. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33687 · Cited by 64
Self-citationPeng, K., Mubarak, S., Diao, X., Cai, Z., Zhang, C., Wang, J., & Wu, L. (2022) · Polymers · doi:10.3390/polym14204320 · Cited by 56
Aliotta, L., Gigante, V., Geerinck, R., Coltelli, M.-B., & Lazzeri, A. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.107984 · Cited by 58
Ding, W., Chu, R. K. M., Mark, L. H., Park, C. B., & Sain, M. M. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.07.054 · Cited by 63
Definitions of Terms and Types of Biopolymers
Niaounakis, M. (2015) · Elsevier eBooks · doi:10.1016/b978-0-323-35399-1.00001-6 · Cited by 63
Kathuria, A., Al‐Ghamdi, S., Abiad, M. G., & Auras, R. A. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42764 · Cited by 63
Self-citationTsuji, H., Tezuka, Y., & Yamada, K. (2005) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.20399 · Cited by 63
Zaidi, L., Bruzaud, S., Kaci, M., Bourmaud, A., Gautier, N., & Grohens, Y. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.09.014 · Cited by 63
Hwang, S. W., Shim, J. K., Selke, S. E. M., Soto‐Valdez, H., Matuana, L. M., Rubino, M. I., & Auras, R. A. (2012) · Polymer International · doi:10.1002/pi.3232 · Cited by 63
Self-citationWang, J., Zhai, W., Ling, J., Shen, B., Zheng, W., & Park, C. B. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie201643j · Cited by 63
Aframehr, W. M., Molki, B., Heidarian, P., Behzad, T., Sadeghi, M., & Bagheri, R. (2017) · Fibers and Polymers · doi:10.1007/s12221-017-6853-0 · Cited by 63
Obtaining antimicrobial bilayer starch and polyester-blend films with carvacrol
Requena, R., Vargas, M., & Chiralt, A. (2018) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.04.045 · Cited by 63
PLA/metal oxide biocomposites for antimicrobial packaging application
Ghozali, M., Fahmiati, S., Triwulandari, E., Restu, W. K., Farhan, D., Wulansari, M., & Fatrıasarı, W. (2020) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2020.1738475 · Cited by 63
Kahraman, Y. S., Özdemir, B., Kılıç, V., Göksu, Y. A., & Nofar, M. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.50457 · Cited by 63
Rajak, A., & Das, A. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202116572 · Cited by 63
Gonçalves, C. M. B., Coutinho, J. A. P., & Marrucho, I. M. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch8 · Cited by 63
Atalay, S. E., Bezci, B., Özdemir, B., Göksu, Y. A., Ghanbari, A., Jalali, A., & Nofar, M. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02128-z · Cited by 62
Attallah, O. A., Mojićević, M., Garcia, E. L., Azeem, M., Chen, Y. Y., Asmawi, S., & Fournet, M. B. (2021) · Polymers · doi:10.3390/polym13132155 · Cited by 62
Glassy Polymers—Diffusion, Sorption, Ageing and Applications
Arya, R. K., Thapliyal, D., Sharma, J., & Verros, G. D. (2021) · Coatings · doi:10.3390/coatings11091049 · Cited by 62
Barczewski, M., Hejna, A., Aniśko, J., Andrzejewski, J., Piasecki, A., Mysiukiewicz, O., Bąk, M., Gapiński, B., & Ortega, Z. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107449 · Cited by 62
Biodegradable synthetic polymers in sustainable corrosion protection: Present and future scenarios
Verma, C., Quraishi, M. A., Alfantazi, A. M., & Rhee, K. Y. (2023) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2023.04.005 · Cited by 62
Chen, C., Wang, L., Es‐haghi, S. S., Tajvidi, M., Wang, J., & Gardner, D. J. (2024) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2024.101244 · Cited by 62
Uysal‐Unalan, I., Söğüt, E., Realini, C. E., Çakmak, H., Öz, E., Espinosa, E., Martín, R. M., Öz, F., Nurmi, M., Cerqueira, M. Â., et al. (2024) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2024.104660 · Cited by 62
Pereira, R. B., & Morales, A. R. (2014) · Polímeros · doi:10.4322/polimeros.2014.042 · Cited by 66
Graupner, N. (2009) · Journal of Composite Materials · doi:10.1177/0021998308100688 · Cited by 62
Gautier, E., Fuertès, P., Cassagnau, P., Pascault, J., & Fleury, É. (2009) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23253 · Cited by 62
Shi, X., Zhang, G., Liu, Y., Ma, Z., Jing, Z., & Fan, X. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3768 · Cited by 62
Isnard, F., Lamberti, M., Pellecchia, C., & Mazzeo, M. (2017) · ChemCatChem · doi:10.1002/cctc.201700234 · Cited by 62
Iñiguez‐Franco, F., Auras, R. A., Rubino, M. I., Dolan, K. D., Soto‐Valdez, H., & Selke, S. E. M. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.11.004 · Cited by 63
Self-citationFernández, J. A. H., Rayón, E., López, J., & Arrieta, M. P. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900379 · Cited by 62
Chen, H., Yu, X., Zhou, W., Peng, S., & Zhao, X. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.07.023 · Cited by 61
Moisture Sorption, Transport, and Hydrolytic Degradation in Polylactide
Cairncross, R. A., Becker, J. G., Ramaswamy, S., & O'connor, R. (2006) · Applied Biochemistry and Biotechnology · doi:10.1385/abab:131:1:774 · Cited by 61
Tsochatzis, E., Gika, H., Theodoridis, G. A., Maragou, N. C., Τhomaidis, Ν. S., & Corredig, M. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e32261 · Cited by 61
Degradability studies of poly(l-lactide) after multi-reprocessing experiments in extruder
Sikorska, W., Richert, J., Rydz, J., Musioł, M., Adamus, G., Janeczek, H., & Kowalczuk, M. M. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.03.049 · Cited by 61
Size effects of cellulose nanofibers for enhancing the crystallization of poly(lactic acid)
Kose, R., & Kondo, T. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38308 · Cited by 61
Processing and nanodispersion: A quantitative approach for polylactide nanocomposite
Bourbigot, S., Fontaine, G., Bellayer, S., & Delobel, R. (2007) · Polymer Testing · doi:10.1016/j.polymertesting.2007.07.008 · Cited by 61
Lan, Q., Li, Y., & Chi, H. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00044 · Cited by 61
Rigoussen, A., Verge, P., Raquez, J., Habibi, Y., & Dúbois, P. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.06.004 · Cited by 61
Shen, Y., Zhang, J., Zhao, N., Liu, F., & Li, Z. (2018) · Polymer Chemistry · doi:10.1039/c8py00389k · Cited by 60
Chen, Y., Pan, M., Li, Y., Xu, J., Zhong, G., Ji, X., Zheng, Y. H., & Li, Z. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.04.037 · Cited by 61
Rahmayetty, Whulanza, Y., Sukirno, S., Rahman, S. F., Suyono, E. A., Yohda, M., & Gozan, M. (2018) · Biocatalysis and Agricultural Biotechnology · doi:10.1016/j.bcab.2018.09.015 · Cited by 62
Zhang, X., Yang, B., Fan, B., Sun, H., & Zhang, H. (2021) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00830 · Cited by 61
A Study of L‐Lactide Ring‐Opening Polymerization Kinetics
Puaux, J., Banu, I., Nagy, I., & Bozga, G. (2007) · Macromolecular Symposia · doi:10.1002/masy.200751336 · Cited by 51
Wasanasuk, K., & Tashiro, K. (2012) · Macromolecules · doi:10.1021/ma3010982 · Cited by 61
Amato, P., Muscetta, M., Venezia, V., Cocca, M., Gentile, G., Castaldo, R., Marotta, R., & Vitiello, G. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.109003 · Cited by 60
Аржакова, О. В., Arzhakov, M. S., Badamshina, E. R., Bryuzgina, E. B., Bryuzgin, E. V., Bystrova, A. V., Vaganov, G., Vasilevskaya, V. V., Vdovichenko, A. Y., Gallyamov, M. O., et al. (2022) · Russian Chemical Reviews · doi:10.57634/rcr5062 · Cited by 60
Homogeneous Catalysis Using Lanthanide Amidinates and Guanidinates
Edelmann, F. T. (2010) · Structure and bonding · doi:10.1007/430_2010_19 · Cited by 60
Hancock, S. L., Mahon, M. F., & Jones, M. D. (2013) · Dalton Transactions · doi:10.1039/c3dt00021d · Cited by 54
Ma, P., Xu, P., Liu, W., Zhai, Y., Dong, W., Zhang, Y., & Chen, M. (2015) · RSC Advances · doi:10.1039/c4ra14194f · Cited by 58
Comparison of different processing methods to prepare poly(lactid acid)–hydrotalcite composites
Scaffaro, R., Botta, L., Passaglia, E., Oberhauser, W., Frediani, M., & Landro, L. D. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23724 · Cited by 60
Effects of TiO2nanoparticles on the photodegradation of poly(lactic acid)
Luo, Y., Cao, Y., & Guo, G. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46509 · Cited by 60
The mechanical, thermal and morphological properties of γ-irradiated PLA/TAIC and PLA/OvPOSS
Kodal, M., Wis, A. A., & Özkoç, G. (2018) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2018.10.018 · Cited by 60
Programming the deformation of a temperature-driven bilayer structure in 4D printing
Zeng, S., Gao, Y., Feng, Y., Zheng, H., Qiu, H. N., & Tan, J. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab39c9 · Cited by 60
Irska, I., Paszkiewicz, S., Gorący, K., Linares, A., Ezquerra, T. A., Jędrzejewski, R., Roslaniec, Z., & Piesowicz, E. (2019) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2020.4 · Cited by 60
Jacob, J., Lawal, U., Thomas, S., & Valapa, R. B. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818795-1.00004-6 · Cited by 60
Yuan, X., Wang, D., Chen, L., Wang, X., & Wang, Y. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.06.012 · Cited by 60
Bogren, K. M., Gamstedt, E. K., Neagu, R. C., Åkerholm, M., & LindstroÖm, M. (2006) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705706067480 · Cited by 60
Physical ageing and molecular mobility in PLA blends and composites
Müller, P., Imre, B., Bere, J., Móczó, J., & Pukánszky, B. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-4831-6 · Cited by 60
Role of PEG Segment in Stereocomplex Crystallization for PLLA/PDLA-b-PEG-b-PDLA Blends
Song, Y., Wang, D., Jiang, N., & Gan, Z. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00214 · Cited by 59
Rao, W., Cai, C., Tang, J., Wei, Y., Gao, C., Yu, L., & Ding, J. (2021) · Chinese Journal of Chemistry · doi:10.1002/cjoc.202000519 · Cited by 59
Hou, B., Wang, Y., Liu, S., Li, B., Huang, L., & Li, J. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.143196 · Cited by 59
Nofar, M., Ameli, A., & Park, C. B. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300474 · Cited by 59
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2013) · Polymer · doi:10.1016/j.polymer.2013.08.031 · Cited by 59
Metadata
- Authors
- Auras, R., Harte, B., & Selke, S.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Auras, Rafael
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2004-08-24
- Volume
- 4
- Issue
- 9
- Pages
- 835-864
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2054432898
- Cited by
- 3,454
- References
- 240
- Citations by year
- 2026: 160 · 2025: 172 · 2024: 191 · 2023: 196 · 2022: 237 · 2021: 258 · 2020: 202 · 2019: 204 · 2018: 191 · 2017: 227 · 2016: 198 · 2015: 212 · 2014: 183 · 2013: 185 · 2012: 149
- FWCI
- 2.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- polylactic acid, biodegradable packaging, PLA films, mechanical properties, glass transition temperature, water sorption, solubility parameter, gas permeability, barrier properties, food contact safety, bio-based polymers
- MeSH terms
- Biocompatible Materials, Biotechnology, Diffusion, Glass, Hot Temperature, Models, Chemical, Polyesters, Polymers, Solubility, Spectrophotometry, Temperature, Thermodynamics, Time Factors, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.