An Overview of Polylactides as Packaging Materials
The DOI matches its Crossref record; 245 of the 245 references it cites were found in a registry or an index.
Abstract
Summary: Polylactide polymers have gained enormous attention as a replacement for conventional synthetic packaging materials in the last decade. By being truly biodegradable, derived from renewable resources and by providing consumers with extra end‐use benefits such as avoiding paying the “green tax” in Germany or meeting environmental regulations in Japan, polylactides (PLAs) are a growing alternative as a packaging material for demanding markets. The aim of this paper is to review the production techniques for PLAs, summarize the main properties of PLA and to delineate the main advantages and disadvantages of PLA as a polymeric packaging material. PLA films have better ultraviolet light barrier properties than low density polyethylene (LDPE), but they are slightly worse than those of cellophane, polystyrene (PS) and poly(ethylene terephthalate) (PET). PLA films have mechanical properties comparable to those of PET and better than those of PS. PLA also has lower melting and glass transition temperatures than PET and PS. The glass transition temperature of PLA changes with time. Humidity between 10 and 95% and storage temperatures of 5 to 40 °C do not have an effect on the transition temperature of PLA, which can be explained by its low water sorption values (i.e. <100 ppm at A w = 1). PLA seals well at temperatures below the melting temperature but an appreciable shrinking of the films has been noted when the material is sealed near its melting temperature. Solubility parameter predictions indicate that PLA will interact with nitrogen compounds, anhydrides and some alcohols and that it will not interact with aromatic hydrocarbons, ketones, esters, sulfur compounds or water. The CO 2 , O 2 and water permeability coefficients of PLA are lower than those of PS and higher than those of PET. Its barrier to ethyl acetate and D ‐limonene is comparable to PET. The amount of lactic acid and its derivatives that migrate to food simulant solutions from PLA is much lower than any of the current average dietary lactic acid intake values allowed by several governmental agencies. Thus, PLA is safe for use in fabricating articles for contact with food. Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films. image Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For the sustained delivery of bioactive compounds, LA and glycolic acid were already proposed as bioresorbable matrices in 1973 [89].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [89]
In the citing paper
“However, the rate of the PLA crystallization is slow (Auras et al., 2004;Liu et al., 2014;Murariu et al., 2015;Zhang et al., 2018), frequently slower than the cooling rate used in common polymer processing devices (Zhang et al., 2018).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Therefore, commercial PLA's are semicrystalline with melting temperature, T m , between 140 and 180 • C in dependence on the enantiomeric purity (Fambri and Migliaresi, 2010) and glass transition temperature, T g , which usually ranges from 55 to 65 • C (Auras et al., 2004;Krishnan et al., 2016).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Some recent studies showed that, by adding bacteria and substrate-degrading enzymes for simultaneous saccharification and fermentation, starch or cellulosic biomass can be saccharified and simultaneously converted into lactic acid; this process can be used as a replacement for the above-mentioned traditional fermentation steps [28,29].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [28]
In the citing paper
“The relative reactivity towards the monomers is important for the formation of block copolymers which are typically produced by sequential addition. [19]”
From Master of Chaos and Order: Opposite Microstructures of PCL‐co‐PGA‐co‐PLA Accessible by a Single Catalyst** (2022) · cites this paper as [19]
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Research works printed but not linked: 65
- Aluminum Association, 1999, Tokyo Steps up to Recycling Efforts
- Mochizuki M., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 1
- Tsuji H., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 129
- Gruber P. R., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 235
- Kawahima N., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 251
- 10.1111/j.1574-6976.1995.tb00168.x · doi:10.1111/j.1574-6976.1995.tb00168.x · Paper page
- N.Whiteman “2000 Polymers Laminations and Coatings Conference” Chicago IL2000 p.631–635.
- J. B.Snook M.Sc. Thesis Michigan State University East Lansing1994 p.130.
- Perego G., 1996, Polymer, 59, 37
- M. H.Hartmann N.Whiteman “TAPPI Polymers Laminations & Coatings Conference” Chicago IL United States2000 p.467–474.
- Leaversuch R. D., 2003, Plastics Technology
- Baillie J., 1997, Packag. Week, 13
- O'Brien M., 2003, Ilip Launches New Fresh Food Packaging Solution
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- Kharas G. B., 1994, Plastics from Microbes, 93
- D. R.Witzke Ph.D. Thesis Michigan State University East Lansing MI1997 p.389.
- 10.1016/0032-3861(81)90256-1 · DOI
- 10.1016/0032-3861(95)93647-5 · DOI · Paper page
- Huang J., 1996, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 37, 370
- Rappard P., 1997, Packag. Rev. S. Afr., 23, 19
- Farrer K. T. H., 1983, Packag. News
- Dunkley W. L., 1963, Milk Dealer, 52, 52
- R.Auras Ph.D. Thesis Michigan State University East Lansing2004 p.268.
- VanKrevelen D. W., 1997, Properties of Polymers
- Ou X., 2003, ANTEC 2003, 1701
- Doi Y., 1994, Biodegradable Plastics and Polymers: Proceedings of the Third International Scientific Workshop on Biodegradable Plastics and Polymers, Osaka, Japan (Studies in Polymer Science, 12), 464
- J. R.Dorgan J.Randal J.Janzen D.Knauss B.Braun P.Gruber “Global Plastics Environmental Conference 2004” Detroit MI February 18–192004.
- Cargill‐Dow‐LLC, PLA Polymer 4042D – A NatureWorks Product. Biaxially Oriented Films – General Purpose
- D. M.Bigg “Annual Technical Conference – Society of Plastics Engineers” 1996 p.2028–2039.
- Barton A. F. M., 1999, Handbook of Solubility Parameters and Other Cohesion Parameters
- Hansen C. M., 1967, J. Paint Technol., 39, 511
- Rocha G., 1992, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 33, 454
- Pauly S., 1999, Polymer Handbook, 547
- Siparsky G. L., 1997, J. Environ. Polym. Degrad., 5, 125, 10.1007/bf02763656 · DOI · Paper page
- N.Whiteman P.DeLassus J.Gunderson “Polymers Laminations & Coatings Conference Proceeding Polyolefins 2002 International Conference on Polyolefins” Houston Texas USA February 24–27 2002.
- 10.1023/a:1021869530253 · doi:10.1023/a:1021869530253
- 10.1023/a:1021860301487 · doi:10.1023/a:1021860301487
- 10.1023/a:1022874530586 · doi:10.1023/a:1022874530586
- 10.1023/a:1022849813748 · doi:10.1023/a:1022849813748
- 10.1023/a:1021808317416 · DOI
- 10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s · doi:10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s
- 10.1016/0142-9612(90)90124-9 · DOI · Paper page
- 10.1023/a:1021812418325 · doi:10.1023/a:1021812418325
- 10.1002/app.11605 · DOI · Paper page
- 10.1023/a:1016036302871 · DOI
- R. G.Sinclair “The First Corn Utilization Conference” St. Louis Missouri June 11–12 1987 p.1–16.
- 10.1016/0032-3861(79)90009-0 · DOI · Paper page
- Park J. W., 1999, Korea Polym. J., 7, 93
- Kim H. S., 1998, Korea Polym. J., 6, 422
- 10.1016/0032-3861(96)83146-6 · DOI
- Farmaceutico S., 2003, Lactide/Glycolide Copolymers: Review on Toxicity, Biocompatibility, and Clinical Application (data up to 1999)
- Hartmann M. H., 1999, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 40, 570
- O'Brien M., 2003, Cargill Dow's World‐scale Manufacturing Facility Comes On Line
- O'Brien M., 2003, Biopolymer Industry Moves from Field of Dreams to Reality: Consumer Products Hitting Retail Shelves Across the Globe
- O'Brien M., 2003, First North American Converter Takes Aim at Grocery Industry with NatureWorks™ PLA
- O'Brien M., 2001, Unifi and Cargill Dow Provide Update on NatureWorks™ PLA Development, 2
- 2003, Faerch Plast to Market Food Packaging from Nature
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- NatureWorks™ PLA, 2003, Top It Off With NatureWorks™ PLA. Dairy and Delicatessen Container Lidding Solutions
- 2003, Kanebo Corn Fiber
- Lunt J., 2003, Polylactic Acid Polymers from Corn: Potential Applications in the Textiles Industry
- Arai K., 2001, Biodegradable Lactide and Polyester Copolymers for use in Packaging and Their Film Properties
- Mohan A. M., 2002, Packag. Digest, 30, 34
- Nageroni J., 2001, Flexible Packag., 25
- Michael O. B., 2003, Ilip Launches New Fresh Food Packaging Solution
Cited by
Items 501–600 of 1,031
de Arenaza, I. M., Meaurio, E., Coto, B., & Sarasua, J.-R. (2010) · Polymer · doi:10.1016/j.polymer.2010.07.018 · Cited by 99
Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review
Vach Agocsova, S., Culenova, M., Birova, I., Omanikova, L., Moncmanova, B., Danisovic, L., Ziaran, S., Bakos, D., & Alexy, P. (2023) · Materials · doi:10.3390/ma16124267 · Cited by 98
“For the sustained delivery of bioactive compounds, LA and glycolic acid were already proposed as bioresorbable matrices in 1973 [89].”
BackgroundThe mechanical behavior of polylactic acid (PLA) films: fabrication, experiments and modelling
Mirkhalaf, M., & Fagerström, M. (2019) · Mechanics of Time-Dependent Materials · doi:10.1007/s11043-019-09429-w · Cited by 98
Water Vapor Permeability of Poly(L‐lactide)/Poly(D‐lactide) Stereocomplexes
Tsuji, H., & Tsuruno, T. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000071 · Cited by 91
Hao, Q., Li, F., Li, Q., Li, Y., Jia, L., Yang, J., Fang, Q., & Cao, A. (2005) · Biomacromolecules · doi:10.1021/bm050213m · Cited by 90
Ouyang, W., Huang, Y., Luo, H., & Wang, D. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0359-4 · Cited by 98
Beyond Biodegradability of Poly(lactic acid): Physical and Chemical Stability in Humid Environments
Rocca-Smith, J. R., Whyte, O., Brachais, C., Champion, D., Piasente, F., Marcuzzo, E., Sensidoni, A., Debeaufort, F., & Karbowiak, T. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03088 · Cited by 98
Biodegradable electrospun PLA-PHB fibers plasticized with oligomeric lactic acid
Arrieta, M. P., Perdiguero, M. S., Fiori, S., Kenny, J. M., & Peponi, L. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109226 · Cited by 97
Aliotta, L., Sciara, L. M., Cinelli, P., Canesi, I., & Lazzeri, A. (2022) · Polymers · doi:10.3390/polym14050977 · Cited by 97
Lactide: Production Routes, Properties, and Applications
Cunha, B. L. C., Bahú, J. O., Xavier, L. F., Crivellin, S., de Souza, S. D. A., Lodi, L., Jardini, A. L., Filho, R. M., Schiavon, M. I. R. B., Concha, V. O. C., et al. (2022) · Bioengineering · doi:10.3390/bioengineering9040164 · Cited by 96
Kassouf, A., Maalouly, J., Rutledge, D. N., Chébib, H., & Ducruet, V. (2014) · Waste Management · doi:10.1016/j.wasman.2014.06.015 · Cited by 97
Xiong, Z., Zhang, L., Ma, S., Yang, Y., Zhang, C., Tang, Z., & Zhu, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.038 · Cited by 91
Vogel, C., Wessel, E., & Siesler, H. W. (2007) · Biomacromolecules · doi:10.1021/bm701035p · Cited by 97
Preparation of single poly(lactic acid) composites
Li, R., & Yao, D. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.27406 · Cited by 97
Wang, Y., Chiao, S. M., Hung, T. ‐., & Yang, S. ‐. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36920 · Cited by 88
Duan, R., Hu, C., Li, X., Pang, X., Sun, Z., Chen, X., & Wang, X. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01766 · Cited by 96
Ahmadzadeh, Y., Babaei, A., & Goudarzi, A. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.10.007 · Cited by 96
One-Pot Synthesis of α,ω-Chain End Functional, Stereoregular, Star-Shaped Poly(lactide)
Stanford, M. J., & Dove, A. P. (2009) · Macromolecules · doi:10.1021/ma801977e · Cited by 84
Yamada, M., Matsumoto, K., Nakai, T., & Taguchi, S. (2009) · Biomacromolecules · doi:10.1021/bm8013846 · Cited by 86
Migration of nanosized layered double hydroxide platelets from polylactide nanocomposite films
Schmidt, B., Katiyar, V., Plackett, D., Larsen, E. H., Gerds, N., Koch, C., & Petersen, J. H. (2011) · Food Additives & Contaminants Part A · doi:10.1080/19440049.2011.572927 · Cited by 96
Crystallization behavior of poly(lactic acid)/microfibrillated cellulose composite
Song, Y., Tashiro, K., Xu, D., Liu, J., & Bin, Y. (2013) · Polymer · doi:10.1016/j.polymer.2013.04.054 · Cited by 96
Ishak, W. H. W., Rosli, N. A., & Ahmad, I. B. (2020) · Scientific Reports · doi:10.1038/s41598-020-68274-x · Cited by 96
Biopolymers and their classifications
Singh, R., Gautam, S., Sharma, B., Jain, P., & Chauhan, K. D. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819240-5.00002-x · Cited by 95
Structural Dependence of the Molecular Mobility in the Amorphous Fractions of Polylactide
Delpouve, N., Delbreilh, L., Stoclet, G., Saiter, A., & Dargent, É. (2014) · Macromolecules · doi:10.1021/ma500839p · Cited by 94
Sheng, K., Zhang, S., Qian, S., & López, C. A. F. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.11.139 · Cited by 94
Nduko, J. M., & Taguchi, S. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.618077 · Cited by 94
Zhang, N., Zeng, C., Wang, L., & Ren, J. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0448-z · Cited by 94
New Insights into Polylactide Biodegradation from Molecular Ecological Techniques
Sangwan, P., & Wu, D. Y. (2008) · Macromolecular Bioscience · doi:10.1002/mabi.200700317 · Cited by 87
In-situ SAXS study of the plastic deformation behavior of polylactide upon cold-drawing
Stoclet, G., Lefebvre, J. M., Séguéla, R., & Vanmansart, C. (2014) · Polymer · doi:10.1016/j.polymer.2014.02.010 · Cited by 94
Song, Y., Matsumoto, K., Yamada, M., Gohda, A., Brigham, C. J., Sinskey, A. J., & Taguchi, S. (2011) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-011-3718-0 · Cited by 95
Hu, X., Kang, H., Li, Y., Geng, Y., Wang, R., & Zhang, L. (2016) · Polymer · doi:10.1016/j.polymer.2016.11.045 · Cited by 94
Kumar, K. N., Бабу, П. Д., Surakasi, R., Kumar, P. M., Ashokkumar, P., Khan, R., Alfozan, A., & Tafesse, D. (2022) · International Journal of Polymer Science · doi:10.1155/2022/1332157 · Cited by 94
Thermal, Mechanical and Rheological Behavior of Poly(lactic acid)/Talc Composites
Jain, S., Misra, M., Mohanty, A. K., & Ghosh, A. K. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0500-z · Cited by 93
Zhao, Y., Lau, K.-T., Kim, J., Xu, C.-L., Zhao, D., & Li, H. (2010) · Composites Part B Engineering · doi:10.1016/j.compositesb.2010.09.003 · Cited by 93
Preparation and Recycling of Plasticized PLA
Scaffaro, R., Morreale, M., Mirabella, F., & La Mantia, F. P. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000221 · Cited by 84
Electrospun PLA/MWCNTs composite nanofibers for combined chemo- and photothermal therapy
Zhang, Z., Liu, S., Xiong, H., Jing, X., Xie, Z., Chen, X., & Huang, Y. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.08.003 · Cited by 93
Lopes, M. S., Jardini, A. L., & Filho, R. M. (2014) · Chemical engineering transactions · doi:10.3303/cet1438056 · Cited by 94
Ambrosio‐Martín, J., Fabra, M. J., López‐Rubio, A., & Lagaron, J. M. (2015) · Cellulose · doi:10.1007/s10570-014-0523-9 · Cited by 93
Lizundia, E., Armentano, I., Luzi, F., Bertoglio, F., Restivo, E., Visai, L., Torre, L., & Puglia, D. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00637 · Cited by 92
Payne, J., Kamran, M., Davidson, M. G., & Jones, M. D. (2022) · ChemSusChem · doi:10.1002/cssc.202200255 · Cited by 93
Bortoli, L. S. D., Farias, R. D., Mezalira, D. Z., Schabbach, L. M., & Fredel, M. C. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.103402 · Cited by 93
Yu, L., Zhang, R., Huang, J., Wang, J., Jiang, Y., Hu, G., Yang, J. P., & Zhu, J. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02196 · Cited by 92
Zong, E., Liu, X., Liu, L., Wang, J., Song, P., Ma, Z., Ding, J. F., & Fu, S. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02599 · Cited by 92
Aluminum-doped zinc oxide coatings on polylactic acid films for antimicrobial food packaging
Valerini, D., Tammaro, L., Benedetto, F. D., Vigliottá, G., Capodieci, L., Terzi, R., & Rizzo, A. (2017) · Thin Solid Films · doi:10.1016/j.tsf.2017.10.038 · Cited by 92
Preparation and characterization of PLA/PBAT/CNC blend nanocomposites
Sarul, D. S., Arslan, D., Vatansever, E., Kahraman, Y. S., Durmuş, A., Salehiyan, R., & Nofar, M. (2021) · Colloid & Polymer Science · doi:10.1007/s00396-021-04822-9 · Cited by 91
Ferri, M., Papchenko, K., Esposti, M. D., Tondi, G., Angelis, M. G. D., Morselli, D., & Fabbri, P. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c04611 · Cited by 91
Bourmaud, A., Duigou, A. L., & Baley, C. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.08.003 · Cited by 91
Carrasco, F., Gámez‐Pérez, J., Pérez, O. O. S., & Maspoch, M. L. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.10.036 · Cited by 91
Dai, X., Xiong, Z., Na, H., & Zhu, J. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.10.009 · Cited by 91
Three‐layer sheets based on gelatin and poly(lactic acid), part 1: Preparation and properties
Martucci, J. F., & Ruseckaite, R. A. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32751 · Cited by 91
Huang, J., Hung, Y. C., Wen, Y., Kang, C., & Yeh, M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29699 · Cited by 91
Fan, Y., Huang, X., Wang, G., & Jiang, P. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b09619 · Cited by 91
Shankar, S., & Rhim, J. (2019) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2019.100327 · Cited by 90
Stepanova, M., & Korzhikova‐Vlakh, E. (2022) · Polymers · doi:10.3390/polym14071477 · Cited by 91
Bioplastics from agro-wastes for food packaging applications
de Moura, I. G., de Sá, A. V., Abreu, A. S. L. M., & Machado, A. V. A. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-804302-8.00007-8 · Cited by 90
Alamri, H., Zhao, J., Pahovnik, D., & Hadjichristidis, N. (2014) · Polym. Chem. · doi:10.1039/c4py00493k · Cited by 89
Ahmed, W. K., Siraj, S., & Al-Marzouqi, A. H. (2020) · Polymers · doi:10.3390/polym12112579 · Cited by 89
Approaches in Sustainable, Biobased Multilayer Packaging Solutions
Eißenberger, K., Ballesteros, A., Bisschop, R. D., Bugnicourt, E., Cinelli, P., Defoin, M., Demeyer, E., Fürtauer, S., Gioia, C., Gómez, L., et al. (2023) · Polymers · doi:10.3390/polym15051184 · Cited by 89
Bacteria for Bioplastics: Progress, Applications, and Challenges
de Souza, F. M., & Gupta, R. K. (2024) · ACS Omega · doi:10.1021/acsomega.3c07372 · Cited by 91
Poly( l ‐lactide)/zno nanocomposites as efficient UV‐shielding coatings for packaging applications
Lizundia, E., Ruiz‐Rubio, L., Vilas‐Vilela, J. L., & León, L. M. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42426 · Cited by 89
Boullay, O. T. D., Bonduelle, C. V., Martín-Vaca, B. M., & Bourissou, D. (2008) · Chemical Communications · doi:10.1039/b800852c · Cited by 89
Wen, X., Gong, J., Yu, H., Liu, Z., Wan, D., Liu, J., Jiang, Z., & Tang, T. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33689h · Cited by 89
Badia-Valiente, J. D., Strömberg, E., Ribes-Greus, A., & Karlsson, S. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.05.001 · Cited by 89
Heat and humidity performance of injection molded PLA for durable applications
Harris, A. M., & Lee, E. C. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30815 · Cited by 89
Multiblock Polyesters Demonstrating High Elasticity and Shape Memory Effects
Zhu, Y., Radlauer, M. R., Schneiderman, D. K., Shaffer, M. S. P., Hillmyer, M. A., & Williams, C. K. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02690 · Cited by 88
Bartos, A., Nagy, K., Anggono, J., Antoni, A., Purwaningsih, H., Móczó, J., & Pukánszky, B. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106273 · Cited by 88
Li, M., Hu, D., Wang, Y., & Shen, C. (2010) · Polymer Engineering and Science · doi:10.1002/pen.21755 · Cited by 88
Fan, Y., Zhu, J., Yan, S., Chen, X., & Yin, J. (2015) · Polymer · doi:10.1016/j.polymer.2015.04.062 · Cited by 88
High Tg aliphatic polyesters by the polymerization of spirolactide derivatives
Fiore, G. L., Jing, F., Young, V. G., Cramer, C. J., & Hillmyer, M. A. (2010) · Polymer Chemistry · doi:10.1039/c0py00029a · Cited by 88
Design and development of soft nanomaterials from biobased amphiphiles
John, G., & Vemula, P. K. (2006) · Soft Matter · doi:10.1039/b609422h · Cited by 88
Poly(lactic acid) melt-spun fibers reinforced with functionalized cellulose nanocrystals
Mújica-García, A., Hooshmand, S., Skrifvars, M., Kenny, J. M., Oksman, K., & Peponi, L. (2016) · RSC Advances · doi:10.1039/c5ra22818b · Cited by 89
Wang, J., Ren, Q., Zheng, W., & Zhai, W. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie403041h · Cited by 88
Polylactides in additive biomanufacturing
Poh, P. S. P., Chhaya, M. P., Wunner, F. M., De‐Juan‐Pardo, E. M., Schilling, A. F., Schantz, J., van Griensven, M., & Hutmacher, D. W. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.07.006 · Cited by 88
Antioxidant Bilayers Based on PHBV and Plasticized Electrospun PLA-PHB Fibers Encapsulating Catechin
Arrieta, M. P., García, A. D., López, D., Fiori, S., & Peponi, L. (2019) · Nanomaterials · doi:10.3390/nano9030346 · Cited by 88
Performance Evaluation of PLA against Existing PET and PS Containers
Auras, R., Singh, S., & Singh, J. (2006) · Journal of Testing and Evaluation · doi:10.1520/jte100041 · Cited by 73
Self-citationAlveolar ridge sockets preservation with bone grafting--review.
Allegrini, S., Koening, B., Allegrini, M. R. F., Yoshimoto, M., Gedrange, T., Fanghänel, J., & Lipski, M. (2008) · PubMed · Cited by 87
Ambrosio‐Martín, J., López‐Rubio, A., Fabra, M. J., López-Manchado, M. Á., Sorrentino, A., Gorrasi, G., & Lagaron, J. M. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42661 · Cited by 87
Hu, H., Zhang, R., Shi, L., Ying, W. B., Wang, J., & Zhu, J. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b02169 · Cited by 87
Pearce, A. K., Foster, J. C., & O’Reilly, R. K. (2019) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.29428 · Cited by 87
Ren, Y.-N., Hu, J., Yang, M., & Weng, Y. (2019) · Journal of Polymers and the Environment · doi:10.1007/s10924-019-01563-3 · Cited by 87
Alkabbanie, R., Aktaş, B., Demircan, G., & Yalçın, Ş. P. (2024) · Iranian Polymer Journal · doi:10.1007/s13726-024-01315-8 · Cited by 87
Tough Blends of Polylactide and Castor Oil
Robertson, M. L., Paxton, J. M., & Hillmyer, M. A. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am2006367 · Cited by 78
Li, Y., & Sun, X. S. (2010) · Biomacromolecules · doi:10.1021/bm100320q · Cited by 87
Theinsathid, P., Visessanguan, W., Kruenate, J., Kingcha, Y., & Keeratipibul, S. (2012) · Journal of Food Science · doi:10.1111/j.1750-3841.2011.02526.x · Cited by 87
Toward Sustainable PLA-Based Multilayer Complexes with Improved Barrier Properties
Rocca-Smith, J. R., Pasquarelli, R., Lagorce-Tachon, A., Rousseau, J., Fontaine, S., Aguié-Béghin, V., Debeaufort, F., & Karbowiak, T. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b04064 · Cited by 83
Odent, J., Leclère, P., Raquez, J.-M., & Dubois, P. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.006 · Cited by 86
Matsumoto, K., & Taguchi, S. (2010) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-009-2374-0 · Cited by 86
“In particular, polylactic acids (PLAs) are representative bio-based plastics with good processability and transparency that are used in packaging, containers, stationary, etc. (Auras et al. 2004).”
BackgroundMethodPolylactic acid (PLA)-based multifunctional and biodegradable nanocomposites and their applications
Islam, M. S., Elahee, G. M. F., Fang, Y., Yu, X. (., Advincula, R. C., & Cao, C. (. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112842 · Cited by 86
Berto, D., Rampazzo, F., Gion, C., Noventa, S., Ronchi, F., Traldi, U., Giorgi, G., Cicero, A. M., & Giovanardi, O. (2017) · Chemosphere · doi:10.1016/j.chemosphere.2017.02.090 · Cited by 86
Limsukon, W., Auras, R. A., & Selke, S. E. M. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106108 · Cited by 86
Self-citationStoica, M., Antohi, V. M., Zlati, M. L., & Stoica, D. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124013 · Cited by 86
Wang, J., Masui, Y., & Onaka, M. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.07.006 · Cited by 86
Release of butylated hydroxytoluene (BHT) from Poly(lactic acid) films
Ortiz-Vazquez, H., Shin, J., Soto‐Valdez, H., & Auras, R. A. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2011.03.006 · Cited by 86
Self-citationChain Packing and Its Anomalous Effect on Mechanical Toughness for Poly(lactic acid)
Huang, T., Miura, M., Nobukawa, S., & Yamaguchi, M. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00293 · Cited by 86
An overview of bio-based polymers for packaging materials
Pan, Y., Farmahini‐Farahani, M., O'Hearn, P., Xiao, H., & Ocampo, H. (1996) · Journal of Bioresources and Bioproducts · doi:10.21967/jbb.v1i3.49 · Cited by 86
Sanford, M. J., Zee, N. J. V., & Coates, G. W. (2017) · Chemical Science · doi:10.1039/c7sc03643d · Cited by 86
Kummari, A., Pappuru, S., & Chakraborty, D. (2018) · Polymer Chemistry · doi:10.1039/c8py00715b · Cited by 86
Poly(lactic acid)/lignin blends prepared with the Pickering emulsion template method
Li, X., Hegyesi, N., Zhang, Y., Mao, Z., Feng, X., Wang, B., Pukánszky, B., & Sui, X. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.12.001 · Cited by 86
Murariu, M., Dechief, A.-L., Ramy-Ratiarison, R., Paint, Y., Raquez, J.-M., & Dubois, P. (2015) · Nanocomposites · doi:10.1179/2055033214y.0000000008 · Cited by 85
Zinc Complexes for PLA Formation and Chemical Recycling: Towards a Circular Economy
McKeown, P., Román‐Ramírez, L. A., Bates, S., Wood, J., & Jones, M. D. (2019) · ChemSusChem · doi:10.1002/cssc.201902755 · Cited by 85
Metadata
- Authors
- Auras, R., Harte, B., & Selke, S.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Auras, Rafael
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2004-08-24
- Volume
- 4
- Issue
- 9
- Pages
- 835-864
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2054432898
- Cited by
- 3,454
- References
- 240
- Citations by year
- 2026: 160 · 2025: 172 · 2024: 191 · 2023: 196 · 2022: 237 · 2021: 258 · 2020: 202 · 2019: 204 · 2018: 191 · 2017: 227 · 2016: 198 · 2015: 212 · 2014: 183 · 2013: 185 · 2012: 149
- FWCI
- 2.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- polylactic acid, biodegradable packaging, PLA films, mechanical properties, glass transition temperature, water sorption, solubility parameter, gas permeability, barrier properties, food contact safety, bio-based polymers
- MeSH terms
- Biocompatible Materials, Biotechnology, Diffusion, Glass, Hot Temperature, Models, Chemical, Polyesters, Polymers, Solubility, Spectrophotometry, Temperature, Thermodynamics, Time Factors, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.