An Overview of Polylactides as Packaging Materials
The DOI matches its Crossref record; 245 of the 245 references it cites were found in a registry or an index.
Abstract
Summary: Polylactide polymers have gained enormous attention as a replacement for conventional synthetic packaging materials in the last decade. By being truly biodegradable, derived from renewable resources and by providing consumers with extra end‐use benefits such as avoiding paying the “green tax” in Germany or meeting environmental regulations in Japan, polylactides (PLAs) are a growing alternative as a packaging material for demanding markets. The aim of this paper is to review the production techniques for PLAs, summarize the main properties of PLA and to delineate the main advantages and disadvantages of PLA as a polymeric packaging material. PLA films have better ultraviolet light barrier properties than low density polyethylene (LDPE), but they are slightly worse than those of cellophane, polystyrene (PS) and poly(ethylene terephthalate) (PET). PLA films have mechanical properties comparable to those of PET and better than those of PS. PLA also has lower melting and glass transition temperatures than PET and PS. The glass transition temperature of PLA changes with time. Humidity between 10 and 95% and storage temperatures of 5 to 40 °C do not have an effect on the transition temperature of PLA, which can be explained by its low water sorption values (i.e. <100 ppm at A w = 1). PLA seals well at temperatures below the melting temperature but an appreciable shrinking of the films has been noted when the material is sealed near its melting temperature. Solubility parameter predictions indicate that PLA will interact with nitrogen compounds, anhydrides and some alcohols and that it will not interact with aromatic hydrocarbons, ketones, esters, sulfur compounds or water. The CO 2 , O 2 and water permeability coefficients of PLA are lower than those of PS and higher than those of PET. Its barrier to ethyl acetate and D ‐limonene is comparable to PET. The amount of lactic acid and its derivatives that migrate to food simulant solutions from PLA is much lower than any of the current average dietary lactic acid intake values allowed by several governmental agencies. Thus, PLA is safe for use in fabricating articles for contact with food. Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films. image Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For the sustained delivery of bioactive compounds, LA and glycolic acid were already proposed as bioresorbable matrices in 1973 [89].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [89]
In the citing paper
“However, the rate of the PLA crystallization is slow (Auras et al., 2004;Liu et al., 2014;Murariu et al., 2015;Zhang et al., 2018), frequently slower than the cooling rate used in common polymer processing devices (Zhang et al., 2018).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Therefore, commercial PLA's are semicrystalline with melting temperature, T m , between 140 and 180 • C in dependence on the enantiomeric purity (Fambri and Migliaresi, 2010) and glass transition temperature, T g , which usually ranges from 55 to 65 • C (Auras et al., 2004;Krishnan et al., 2016).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Some recent studies showed that, by adding bacteria and substrate-degrading enzymes for simultaneous saccharification and fermentation, starch or cellulosic biomass can be saccharified and simultaneously converted into lactic acid; this process can be used as a replacement for the above-mentioned traditional fermentation steps [28,29].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [28]
In the citing paper
“The relative reactivity towards the monomers is important for the formation of block copolymers which are typically produced by sequential addition. [19]”
From Master of Chaos and Order: Opposite Microstructures of PCL‐co‐PGA‐co‐PLA Accessible by a Single Catalyst** (2022) · cites this paper as [19]
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Research works printed but not linked: 66
- Aluminum Association, 1999, Tokyo Steps up to Recycling Efforts
- Mochizuki M., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 1
- Tsuji H., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 129
- Gruber P. R., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 235
- Kawahima N., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 251
- 10.1111/j.1574-6976.1995.tb00168.x · doi:10.1111/j.1574-6976.1995.tb00168.x · Paper page
- N.Whiteman “2000 Polymers Laminations and Coatings Conference” Chicago IL2000 p.631–635.
- J. B.Snook M.Sc. Thesis Michigan State University East Lansing1994 p.130.
- Perego G., 1996, Polymer, 59, 37
- M. H.Hartmann N.Whiteman “TAPPI Polymers Laminations & Coatings Conference” Chicago IL United States2000 p.467–474.
- Leaversuch R. D., 2003, Plastics Technology
- Baillie J., 1997, Packag. Week, 13
- O'Brien M., 2003, Ilip Launches New Fresh Food Packaging Solution
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- Kharas G. B., 1994, Plastics from Microbes, 93
- D. R.Witzke Ph.D. Thesis Michigan State University East Lansing MI1997 p.389.
- 10.1016/0032-3861(81)90256-1 · DOI
- 10.1016/0032-3861(95)93647-5 · DOI · Paper page
- Huang J., 1996, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 37, 370
- Rappard P., 1997, Packag. Rev. S. Afr., 23, 19
- Farrer K. T. H., 1983, Packag. News
- Dunkley W. L., 1963, Milk Dealer, 52, 52
- R.Auras Ph.D. Thesis Michigan State University East Lansing2004 p.268.
- VanKrevelen D. W., 1997, Properties of Polymers
- Ou X., 2003, ANTEC 2003, 1701
- Doi Y., 1994, Biodegradable Plastics and Polymers: Proceedings of the Third International Scientific Workshop on Biodegradable Plastics and Polymers, Osaka, Japan (Studies in Polymer Science, 12), 464
- J. R.Dorgan J.Randal J.Janzen D.Knauss B.Braun P.Gruber “Global Plastics Environmental Conference 2004” Detroit MI February 18–192004.
- Cargill‐Dow‐LLC, PLA Polymer 4042D – A NatureWorks Product. Biaxially Oriented Films – General Purpose
- D. M.Bigg “Annual Technical Conference – Society of Plastics Engineers” 1996 p.2028–2039.
- Barton A. F. M., 1999, Handbook of Solubility Parameters and Other Cohesion Parameters
- Hansen C. M., 1967, J. Paint Technol., 39, 511
- Rocha G., 1992, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 33, 454
- Pauly S., 1999, Polymer Handbook, 547
- Siparsky G. L., 1997, J. Environ. Polym. Degrad., 5, 125, 10.1007/bf02763656 · DOI · Paper page
- N.Whiteman P.DeLassus J.Gunderson “Polymers Laminations & Coatings Conference Proceeding Polyolefins 2002 International Conference on Polyolefins” Houston Texas USA February 24–27 2002.
- 10.1023/a:1021869530253 · doi:10.1023/a:1021869530253
- 10.1023/a:1021860301487 · doi:10.1023/a:1021860301487
- 10.1023/a:1022874530586 · doi:10.1023/a:1022874530586
- 10.1023/a:1022849813748 · doi:10.1023/a:1022849813748
- 10.1023/a:1021808317416 · DOI
- 10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s · doi:10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s
- 10.1016/0142-9612(90)90124-9 · DOI · Paper page
- 10.1023/a:1021812418325 · doi:10.1023/a:1021812418325
- 10.1002/app.11605 · DOI · Paper page
- 10.1023/a:1016036302871 · DOI
- R. G.Sinclair “The First Corn Utilization Conference” St. Louis Missouri June 11–12 1987 p.1–16.
- 10.1016/0032-3861(79)90009-0 · DOI · Paper page
- 10.1002/(sici)1097-4628(19981212)70:11<2259::aid-app20>3.0.co;2-j · doi:10.1002/(sici)1097-4628(19981212)70:11<2259::aid-app20>3.0.co;2-j
- Park J. W., 1999, Korea Polym. J., 7, 93
- Kim H. S., 1998, Korea Polym. J., 6, 422
- 10.1016/0032-3861(96)83146-6 · DOI
- Farmaceutico S., 2003, Lactide/Glycolide Copolymers: Review on Toxicity, Biocompatibility, and Clinical Application (data up to 1999)
- Hartmann M. H., 1999, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 40, 570
- O'Brien M., 2003, Cargill Dow's World‐scale Manufacturing Facility Comes On Line
- O'Brien M., 2003, Biopolymer Industry Moves from Field of Dreams to Reality: Consumer Products Hitting Retail Shelves Across the Globe
- O'Brien M., 2003, First North American Converter Takes Aim at Grocery Industry with NatureWorks™ PLA
- O'Brien M., 2001, Unifi and Cargill Dow Provide Update on NatureWorks™ PLA Development, 2
- 2003, Faerch Plast to Market Food Packaging from Nature
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- NatureWorks™ PLA, 2003, Top It Off With NatureWorks™ PLA. Dairy and Delicatessen Container Lidding Solutions
- 2003, Kanebo Corn Fiber
- Lunt J., 2003, Polylactic Acid Polymers from Corn: Potential Applications in the Textiles Industry
- Arai K., 2001, Biodegradable Lactide and Polyester Copolymers for use in Packaging and Their Film Properties
- Mohan A. M., 2002, Packag. Digest, 30, 34
- Nageroni J., 2001, Flexible Packag., 25
- Michael O. B., 2003, Ilip Launches New Fresh Food Packaging Solution
Cited by
Items 301–400 of 1,031
PLA/Halloysite Nanocomposite Films: Water Vapor Barrier Properties and Specific Key Characteristics
Gorrasi, G., Pantani, R., Murariu, M., & Dubois, P. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200424 · Cited by 136
Toughening of polylactic acid: an overview of research progress
Krishnan, S., Pandey, P., Mohanty, S., & Nayak, S. K. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1098698 · Cited by 147
Production of Biodegradable Plastic Packaging Film from Cassava Starch
Ezeoha, S. L. (2013) · IOSR Journal of Engineering · doi:10.9790/3021-031051420 · Cited by 147
Polylactic acid trays for fresh-food packaging: A Carbon Footprint assessment
Ingrao, C., Tricase, C., Cholewa-Wójcik, A., Kawecka, A. K., Rana, R. L., & Siracusa, V. (2015) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2015.08.023 · Cited by 147
Synthesis of Poly(lactide)s with Modified Thermal and Mechanical Properties
Becker, J. M., Pounder, R. J., & Dove, A. P. (2010) · Macromolecular Rapid Communications · doi:10.1002/marc.201000088 · Cited by 146
Polymerization of Lactide Using Achiral Bis(pyrrolidene) Schiff Base Aluminum Complexes
Du, H., Velders, A. H., Dijkstra, P. J., Zhong, Z., Chen, X., & Feijen, J. (2009) · Macromolecules · doi:10.1021/ma802564s · Cited by 135
Wang, L., Lee, R. E., Wang, G., Chu, R. K. M., Zhao, J., & Park, C. B. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.07.024 · Cited by 146
Water Barrier Properties in Biaxially Drawn Poly(lactic acid) Films
Delpouve, N., Stoclet, G., Saiter, A., Dargent, E., & Marais, S. (2012) · The Journal of Physical Chemistry B · doi:10.1021/jp211670g · Cited by 139
Siracusa, V., Blanco, I., Romani, S., Tylewicz, U., Rocculi, P., & Rosa, M. D. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36829 · Cited by 144
Tashiro, K., Kouno, N., Wang, H., & Tsuji, H. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01468 · Cited by 143
Chen, W., Qi, C., Li, Y., & Tao, H. (2021) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2020.109239 · Cited by 127
Biodegradable polyester-polybutylene succinate (PBS): a review
Rajgond, V., Mohite, A. S., More, N., & More, A. P. (2023) · Polymer Bulletin · doi:10.1007/s00289-023-04998-w · Cited by 143
Darensbourg, D. J., & Karroonnirun, O. (2010) · Organometallics · doi:10.1021/om100518e · Cited by 135
A novel technology to manufacture biodegradable polylactide bead foam products
Nofar, M., Ameli, A., & Park, C. B. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.052 · Cited by 142
Arrieta, M. P., López, J., López, D., Kenny, J. M., & Peponi, L. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.12.058 · Cited by 136
Martínez‐Sanz, M., López‐Rubio, A., & Lagaron, J. M. (2012) · Biomacromolecules · doi:10.1021/bm301430j · Cited by 142
Implantable and Biodegradable Poly( l ‐lactic acid) Fibers for Optical Neural Interfaces
Fu, R., Luo, W., Nazempour, R., Tan, D., Ding, H., Zhang, K., Yin, L., Guan, J., & Sheng, X. (2017) · Advanced Optical Materials · doi:10.1002/adom.201700941 · Cited by 142
Mallegni, N., Phuong, T., Coltelli, M.-B., Cinelli, P., & Lazzeri, A. (2018) · Materials · doi:10.3390/ma11010148 · Cited by 128
Zhang, H., Huang, J., Li, Y., Chen, R., Zou, W., Lin, X., & Qu, J. (2014) · RSC Advances · doi:10.1039/c4ra14538k · Cited by 140
Transforming polylactide into value‐added materials
Leibfarth, F. A., Moreno, N., Hawker, A. P., & Shand, J. D. (2012) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.26303 · Cited by 139
Bitinis, N., Verdejo, R., Maya, E. M., Espuche, É., Cassagnau, P., & López-Manchado, M. Á. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.11.018 · Cited by 139
Xue, Z., Sun, Z., Cao, Y., Chen, Y., Tao, L., Li, K., Feng, L., Fu, Q., & Wei, Y. (2013) · RSC Advances · doi:10.1039/c3ra41902a · Cited by 139
PLA/PHBV Films with Improved Mechanical and Gas Barrier Properties
Boufarguine, M., Guinault, A., Miquelard‐Garnier, G., & Sollogoub, C. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200285 · Cited by 115
Impact of crystallinity of poly(lactide) on helium and oxygen barrier properties
Guinault, A., Sollogoub, C., Ducruet, V., & Domenek, S. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.01.014 · Cited by 125
Cacciotti, I., Mori, S., Cherubini, V., & Nanni, F. M. C. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.02.018 · Cited by 137
Water vapor permeability of poly(lactide)s: Effects of molecular characteristics and crystallinity
Tsuji, H., Okino, R., Daimon, H., & Fujie, K. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.22698 · Cited by 136
Wrona, M., Cran, M. J., Nerín, C., & Bigger, S. W. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.08.094 · Cited by 136
Increase the elongation at break of poly (lactic acid) composites for use in food packaging films
El-hadi, A. M. (2017) · Scientific Reports · doi:10.1038/srep46767 · Cited by 123
Dielectric Properties of 3D Printed Polylactic Acid
Dichtl, C., Sippel, P., & Krohns, S. (2017) · Advances in Materials Science and Engineering · doi:10.1155/2017/6913835 · Cited by 136
Synthesis and characterisation of poly (lactic acid)/halloysite bionanocomposite films
Silva, R. D., Pasbakhsh, P., Goh, K. L., Chai, S.-P., & Chen, J. (2013) · Journal of Composite Materials · doi:10.1177/0021998313513046 · Cited by 135
Hoppe, M., de Voogt, P., & Franz, R. (2016) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2016.01.018 · Cited by 135
Postharvest shelf life extension of blueberries using a biodegradable package
Almenar, E., Samsudin, H., Auras, R. A., Harte, B., & Rubino, M. I. (2008) · Food Chemistry · doi:10.1016/j.foodchem.2008.01.066 · Cited by 135
Self-citationRhim, J. (2013) · Food Research International · doi:10.1016/j.foodres.2013.01.050 · Cited by 135
Bonduelle, C., Martín‐Vaca, B., Cossío, F. P., & Bourissou, D. (2008) · Chemistry – A European Journal · doi:10.1002/chem.200800346 · Cited by 109
Triblock copolymers from lactide and telechelic poly(cyclohexene carbonate)
Kember, M. R., Copley, J., Buchard, A., & Williams, C. K. (2012) · Polymer Chemistry · doi:10.1039/c2py00543c · Cited by 123
Ho, R., Tseng, W.-H., Fan, H.-W., Chiang, Y.-W., Lin, C., Ko, B., & Huang, B.-H. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.069 · Cited by 134
Supthanyakul, R., Kaabbuathong, N., & Chirachanchai, S. (2016) · Polymer · doi:10.1016/j.polymer.2016.10.006 · Cited by 134
Pal, N., Dubey, P., Gopinath, P., & Pal, K. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.11.041 · Cited by 134
Metallic phytates as efficient bio-based phosphorous flame retardant additives for poly(lactic acid)
Costes, L., Laoutid, F., Dumazert, L., Lopez‐Cuesta, J., Brohez, S., Delvosalle, C., & Dúbois, P. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.05.014 · Cited by 134
Synthesis and characterization of poly(lactic acid) based graft copolymers
Maharana, T., Pattanaik, S., Routaray, A., Nath, N., & Sutar, A. K. (2015) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2015.05.006 · Cited by 134
Wang, Z., Ding, J., Song, X., Zheng, L., Huang, J., Zou, H., & Wang, Z. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.158921 · Cited by 134
Arijeniwa, F. V., Akinsemolu, A. A., Chukwugozie, D. C., Onawo, U. G., Ochulor, C. E., Nwauzoma, U. M., Kawino, D. A., & Onyeaka, H. N. (2024) · Journal of Environmental Management · doi:10.1016/j.jenvman.2024.120816 · Cited by 135
Jiang, P., Gu, X., Zhang, S., Wu, S., Zhao, Q., & Hu, Z. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/ie505021d · Cited by 133
Group 4 salalen complexes for the production and degradation of polylactide
Whitelaw, E. L., Davidson, M. G., & Jones, M. D. (2011) · Chemical Communications · doi:10.1039/c1cc13910j · Cited by 129
Effect of chain extension on the properties of PLA/TPS blends
Li, H., & Huneault, M. A. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33981 · Cited by 122
How Do Bioplastics and Fossil‐Based Plastics Play in a Circular Economy?
Kawashima, N., Yagi, T., & Kojima, K. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900383 · Cited by 132
Bourbigot, S., Duquesne, S., Fontaine, G., Bellayer, S., Turf, T., & Samyn, F. (2008) · Molecular Crystals and Liquid Crystals · doi:10.1080/15421400801921983 · Cited by 132
Biopolymers for Biocomposites and Chemical Sensor Applications
Abhilash, M., & Thomas, D. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-809261-3.00015-2 · Cited by 132
Biobased Transesterification Vitrimers
Kumar, A., & Connal, L. A. (2023) · Macromolecular Rapid Communications · doi:10.1002/marc.202200892 · Cited by 131
Press, K., Goldberg, I., & Kol, M. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503111 · Cited by 124
Non-isothermal crystal nucleation of poly (l-lactic acid)
Androsch, R., Iqbal, H. M. N., & Schick, C. H. (2015) · Polymer · doi:10.1016/j.polymer.2015.11.006 · Cited by 130
Matuana, L. M., & Diaz, C. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9011694 · Cited by 130
Xiong, Z., Li, C., Ma, S., Feng, J., Yang, Y., Zhang, R., & Zhu, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.02.054 · Cited by 130
Zelikoff, A. L., Kopilov, J., Goldberg, I., Coates, G. W., & Kol, M. (2009) · Chemical Communications · doi:10.1039/b915211c · Cited by 129
Mahrova, T. V., Fukin, G. K., Cherkasov, A. V., Trifonov, A. A., Ajellal, N., & Carpentier, J.-F. (2009) · Inorganic Chemistry · doi:10.1021/ic802427f · Cited by 116
Ma, C., Pan, P., Shan, G., Bao, Y., Fujita, M., & Maeda, M. (2015) · Langmuir · doi:10.1021/la503869d · Cited by 125
Organocatalytic ring-opening polymerization of l-lactide in bulk: A long standing challenge
Mezzasalma, L., Dove, A. P., & Coulembier, O. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.05.013 · Cited by 130
Evaluation of the functionality of bio-based food packaging films
Briassoulis, D., & Giannoulis, A. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.05.003 · Cited by 129
La Mattina, A. A., Mariani, S., & Barillaro, G. (2020) · Advanced Science · doi:10.1002/advs.201902872 · Cited by 124
Cavallo, E., He, X., Luzi, F., Dominici, F., Cerrutti, P., Bernal, C., Foresti, M. L., Torre, L., & Puglia, D. (2020) · Molecules · doi:10.3390/molecules26010126 · Cited by 129
Fabrication of Quercetin-Loaded Biopolymer Films as Functional Packaging Materials
Ezati, P., & Rhim, J. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00177 · Cited by 129
Bio-Based and Biodegradable Polymeric Materials for a Circular Economy
Oliver-Cuenca, V., Salaris, V., Muñoz-Gimena, P. F., Agüero, Á., Peltzer, M. A., Alcázar, V., Arrieta, M. P., Sempere‐Torregrosa, J., Pavón, C., Samper, M. D., et al. (2024) · Polymers · doi:10.3390/polym16213015 · Cited by 129
Bourbigot, S., Fontaine, G., Gallos, A., & Bellayer, S. (2010) · Polymers for Advanced Technologies · doi:10.1002/pat.1715 · Cited by 129
Crystallinity and dimensional stability of biaxial oriented poly(lactic acid) films
Tsai, C.-C., Wu, R.-J., Cheng, H., Li, S., Siao, Y.-Y., Kong, D., & Jang, G. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.02.032 · Cited by 129
Microcellular injection-molding of polylactide with chain-extender
Pilla, S., Kramschuster, A., Yang, L., Lee, J., Gong, S., & Turng, L. (2008) · Materials Science and Engineering C · doi:10.1016/j.msec.2008.10.027 · Cited by 129
Yu, J., Ai, F., Dufresne, A., Gao, S., Huang, J., & Chang, P. R. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200800134 · Cited by 129
Effect of Nanoclay Hydration on Barrier Properties of PLA/Montmorillonite Based Nanocomposites
Tenn, N., Nadege, F., Soulestin, J., Crétois, R., Bourbigot, S., & Marais, S. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp401546t · Cited by 129
Martínez‐Sanz, M., Villano, M., Oliveira, C. S., Albuquerque, M. G. E., Majone, M., Reis, M. A. M., López‐Rubio, A., & Lagaron, J. M. (2013) · New Biotechnology · doi:10.1016/j.nbt.2013.06.003 · Cited by 128
Bio-based plastics: status, challenges and trends
Storz, H., & Vorlop, K. (2013) · OpenAgrar · doi:10.3220/lbf_2013_321-332 · Cited by 129
Glass Transitions in Polylactides
Baker, G., Vogel, E., & Smith, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834208 · Cited by 111
Tao, K., Li, J., Xu, L. H., Zhao, X., Xue, L., Fan, X., & Qing, Y. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.04.011 · Cited by 128
PLA based biocomposites reinforced with Arundo donax fillers
Fiore, V., Botta, L., Scaffaro, R., Valenza, A., & Pirrotta, A. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.005 · Cited by 128
Belbachir, S., Zaïri, F., Ayoub, G. Y., Maschke, U., Naït‐Abdelaziz, M., Gloaguen, J. M., Benguediab, M., & Lefebvre, J. M. (2009) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2009.10.003 · Cited by 128
González‐López, M. E., Robledo‐Ortíz, J. R., Manríquez‐González, R., Silva‐Guzmán, J. A., & Pérez‐Fonseca, A. A. (2018) · Composite Interfaces · doi:10.1080/09276440.2018.1439622 · Cited by 127
Utilization of lignin fractions in UV resistant lignin-PLA biocomposites via lignin-lactide grafting
Park, S. Y., Kim, J., Youn, H. J., & Choi, J. W. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.07.157 · Cited by 127
Reactive Compatibilization of Poly(l-lactide) and Conjugated Soybean Oil
Gramlich, W. M., Robertson, M. L., & Hillmyer, M. A. (2010) · Macromolecules · doi:10.1021/ma902449x · Cited by 116
Sorption of ethyl acetate and d‐limonene in poly(lactide) polymers
Auras, R. A., Harte, B., & Selke, S. E. M. (2005) · Journal of the Science of Food and Agriculture · doi:10.1002/jsfa.2391 · Cited by 126
Self-citationDevelopment of bioplastics from a microalgae consortium from wastewater
Rocha, C. J. L., Álvarez‐Castillo, E., Yáñez, M. R. E., Bengoechea, C., Guerrero, A. F., & Ledesma, M. T. O. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.110353 · Cited by 126
Jariyasakoolroj, P., Tashiro, K., Wang, H., Yamamoto, H., Chinsirikul, W., Kerddonfag, N., & Chirachanchai, S. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.006 · Cited by 125
Advances in heterometallic ring-opening (co)polymerisation catalysis
Gruszka, W., & Garden, J. A. (2021) · Nature Communications · doi:10.1038/s41467-021-23192-y · Cited by 113
Wheaton, C. A., & Hayes, P. G. (2010) · Chemical Communications · doi:10.1039/c0cc03463k · Cited by 108
Zhu, J.-Y., Tang, C., Yin, S., & Yang, X. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.085 · Cited by 123
Molla, M. R., Rangadurai, P., Antony, L. W., Swaminathan, S., Pablo, J., & Thayumanavan, S. (2018) · Nature Chemistry · doi:10.1038/s41557-018-0027-6 · Cited by 123
Chemical Recycling of Post-Consumer PLA Waste for Sustainable Production of Ethyl Lactate
Majgaonkar, P., Hanich-Spahn, R., Malz, F., & Brüll, R. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129952 · Cited by 123
Design of 4D printed shape-changing tracheal stent and remote controlling actuation
Zhang, F., Wen, N., Wang, L., Bai, Y., & Leng, J. (2021) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2021.1974972 · Cited by 123
Schwach, E., Six, J., & Avérous, L. (2008) · Journal of Polymers and the Environment · doi:10.1007/s10924-008-0107-6 · Cited by 123
Tawakkal, I. S. M. A., Talib, R. A., Abdan, K., & Ling, C. N. (2012) · BioResources · doi:10.15376/biores.7.2.1643-1655 · Cited by 123
Emission Color Tuning with Polymer Molecular Weight for Difluoroboron Dibenzoylmethane‐Polylactide
Zhang, G., Kooi, S. E., Demas, J. N., & Fraser, C. L. (2008) · Advanced Materials · doi:10.1002/adma.200702681 · Cited by 123
de França, J. O. C., Valadares, D. D. S., Paiva, M. F., Dias, S. C. L., & Dias, J. A. (2022) · Polymers · doi:10.3390/polym14122317 · Cited by 122
Murariu, M., Ferreira, A. D. S., Pluta, M., Bonnaud, L., Alexandre, M., & Dúbois, P. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.07.055 · Cited by 122
Super-tough Poly(lactide) Thermoplastic Vulcanizates Based on Modified Natural Rubber
Wu, N., Zhang, H., & Fu, G. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02197 · Cited by 121
Sun, J., Li, L., & Li, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.03.036 · Cited by 121
Nilsson, A. E., Bergman, K., Barrio, L. P. G., Cabral, E. M., & Tiwari, B. K. (2022) · Algal Research · doi:10.1016/j.algal.2022.102725 · Cited by 121
Cai, K., Liu, X., Ma, X., Zhang, J., Tu, S., & Feng, J. (2023) · Polymer · doi:10.1016/j.polymer.2023.126587 · Cited by 121
Industrial Production of High Molecular Weight Poly(Lactic Acid)
Södergård, A., & Stolt, M. (2010) · Poly(Lactic Acid) · doi:10.1002/9780470649848.ch3 · Cited by 83
Martino, V. P., Ruseckaite, R. A., & Jiménez, A. (2006) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-006-7897-3 · Cited by 121
Stereoselective and controlled polymerization of d,l-lactide using indium(iii) trichloride
Pietrangelo, A., Hillmyer, M. A., & Tolman, W. B. (2009) · Chemical Communications · doi:10.1039/b902968k · Cited by 116
Evidence of a dual network/spherulitic crystalline morphology in PLA stereocomplexes
Saeidlou, S., Huneault, M. A., Li, H., Sammut, P., & Park, C. B. (2012) · Polymer · doi:10.1016/j.polymer.2012.10.030 · Cited by 120
Tensile and Thermal Properties of Poly(lactic acid)/Eggshell Powder Composite Films
Ashok, B., Naresh, S., Reddy, K. O., Madhukar, K., Cai, J., Zhang, L., & Rajulu, A. V. (2014) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2014.879633 · Cited by 120
Villegas, C., Torres, A., Rios, M., Rojas, A., Romero, J., de Dicastillo, C. L., Valenzuela, X., Galotto, M. J., & Guarda, A. (2017) · Food Research International · doi:10.1016/j.foodres.2017.06.031 · Cited by 120
Metadata
- Authors
- Auras, R., Harte, B., & Selke, S.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Auras, Rafael
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2004-08-24
- Volume
- 4
- Issue
- 9
- Pages
- 835-864
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2054432898
- Cited by
- 3,454
- References
- 240
- Citations by year
- 2026: 160 · 2025: 172 · 2024: 191 · 2023: 196 · 2022: 237 · 2021: 258 · 2020: 202 · 2019: 204 · 2018: 191 · 2017: 227 · 2016: 198 · 2015: 212 · 2014: 183 · 2013: 185 · 2012: 149
- FWCI
- 2.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- polylactic acid, biodegradable packaging, PLA films, mechanical properties, glass transition temperature, water sorption, solubility parameter, gas permeability, barrier properties, food contact safety, bio-based polymers
- MeSH terms
- Biocompatible Materials, Biotechnology, Diffusion, Glass, Hot Temperature, Models, Chemical, Polyesters, Polymers, Solubility, Spectrophotometry, Temperature, Thermodynamics, Time Factors, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.