An Overview of Polylactides as Packaging Materials
The DOI matches its Crossref record; 245 of the 245 references it cites were found in a registry or an index.
Abstract
Summary: Polylactide polymers have gained enormous attention as a replacement for conventional synthetic packaging materials in the last decade. By being truly biodegradable, derived from renewable resources and by providing consumers with extra end‐use benefits such as avoiding paying the “green tax” in Germany or meeting environmental regulations in Japan, polylactides (PLAs) are a growing alternative as a packaging material for demanding markets. The aim of this paper is to review the production techniques for PLAs, summarize the main properties of PLA and to delineate the main advantages and disadvantages of PLA as a polymeric packaging material. PLA films have better ultraviolet light barrier properties than low density polyethylene (LDPE), but they are slightly worse than those of cellophane, polystyrene (PS) and poly(ethylene terephthalate) (PET). PLA films have mechanical properties comparable to those of PET and better than those of PS. PLA also has lower melting and glass transition temperatures than PET and PS. The glass transition temperature of PLA changes with time. Humidity between 10 and 95% and storage temperatures of 5 to 40 °C do not have an effect on the transition temperature of PLA, which can be explained by its low water sorption values (i.e. <100 ppm at A w = 1). PLA seals well at temperatures below the melting temperature but an appreciable shrinking of the films has been noted when the material is sealed near its melting temperature. Solubility parameter predictions indicate that PLA will interact with nitrogen compounds, anhydrides and some alcohols and that it will not interact with aromatic hydrocarbons, ketones, esters, sulfur compounds or water. The CO 2 , O 2 and water permeability coefficients of PLA are lower than those of PS and higher than those of PET. Its barrier to ethyl acetate and D ‐limonene is comparable to PET. The amount of lactic acid and its derivatives that migrate to food simulant solutions from PLA is much lower than any of the current average dietary lactic acid intake values allowed by several governmental agencies. Thus, PLA is safe for use in fabricating articles for contact with food. Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films. image Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For the sustained delivery of bioactive compounds, LA and glycolic acid were already proposed as bioresorbable matrices in 1973 [89].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [89]
In the citing paper
“However, the rate of the PLA crystallization is slow (Auras et al., 2004;Liu et al., 2014;Murariu et al., 2015;Zhang et al., 2018), frequently slower than the cooling rate used in common polymer processing devices (Zhang et al., 2018).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Therefore, commercial PLA's are semicrystalline with melting temperature, T m , between 140 and 180 • C in dependence on the enantiomeric purity (Fambri and Migliaresi, 2010) and glass transition temperature, T g , which usually ranges from 55 to 65 • C (Auras et al., 2004;Krishnan et al., 2016).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Some recent studies showed that, by adding bacteria and substrate-degrading enzymes for simultaneous saccharification and fermentation, starch or cellulosic biomass can be saccharified and simultaneously converted into lactic acid; this process can be used as a replacement for the above-mentioned traditional fermentation steps [28,29].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [28]
In the citing paper
“The relative reactivity towards the monomers is important for the formation of block copolymers which are typically produced by sequential addition. [19]”
From Master of Chaos and Order: Opposite Microstructures of PCL‐co‐PGA‐co‐PLA Accessible by a Single Catalyst** (2022) · cites this paper as [19]
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Research works printed but not linked: 65
- Aluminum Association, 1999, Tokyo Steps up to Recycling Efforts
- Mochizuki M., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 1
- Tsuji H., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 129
- Gruber P. R., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 235
- Kawahima N., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 251
- 10.1111/j.1574-6976.1995.tb00168.x · doi:10.1111/j.1574-6976.1995.tb00168.x · Paper page
- N.Whiteman “2000 Polymers Laminations and Coatings Conference” Chicago IL2000 p.631–635.
- J. B.Snook M.Sc. Thesis Michigan State University East Lansing1994 p.130.
- Perego G., 1996, Polymer, 59, 37
- M. H.Hartmann N.Whiteman “TAPPI Polymers Laminations & Coatings Conference” Chicago IL United States2000 p.467–474.
- Leaversuch R. D., 2003, Plastics Technology
- Baillie J., 1997, Packag. Week, 13
- O'Brien M., 2003, Ilip Launches New Fresh Food Packaging Solution
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- Kharas G. B., 1994, Plastics from Microbes, 93
- D. R.Witzke Ph.D. Thesis Michigan State University East Lansing MI1997 p.389.
- 10.1016/0032-3861(81)90256-1 · DOI
- 10.1016/0032-3861(95)93647-5 · DOI · Paper page
- Huang J., 1996, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 37, 370
- Rappard P., 1997, Packag. Rev. S. Afr., 23, 19
- Farrer K. T. H., 1983, Packag. News
- Dunkley W. L., 1963, Milk Dealer, 52, 52
- R.Auras Ph.D. Thesis Michigan State University East Lansing2004 p.268.
- VanKrevelen D. W., 1997, Properties of Polymers
- Ou X., 2003, ANTEC 2003, 1701
- Doi Y., 1994, Biodegradable Plastics and Polymers: Proceedings of the Third International Scientific Workshop on Biodegradable Plastics and Polymers, Osaka, Japan (Studies in Polymer Science, 12), 464
- J. R.Dorgan J.Randal J.Janzen D.Knauss B.Braun P.Gruber “Global Plastics Environmental Conference 2004” Detroit MI February 18–192004.
- Cargill‐Dow‐LLC, PLA Polymer 4042D – A NatureWorks Product. Biaxially Oriented Films – General Purpose
- D. M.Bigg “Annual Technical Conference – Society of Plastics Engineers” 1996 p.2028–2039.
- Barton A. F. M., 1999, Handbook of Solubility Parameters and Other Cohesion Parameters
- Hansen C. M., 1967, J. Paint Technol., 39, 511
- Rocha G., 1992, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 33, 454
- Pauly S., 1999, Polymer Handbook, 547
- Siparsky G. L., 1997, J. Environ. Polym. Degrad., 5, 125, 10.1007/bf02763656 · DOI · Paper page
- N.Whiteman P.DeLassus J.Gunderson “Polymers Laminations & Coatings Conference Proceeding Polyolefins 2002 International Conference on Polyolefins” Houston Texas USA February 24–27 2002.
- 10.1023/a:1021869530253 · doi:10.1023/a:1021869530253
- 10.1023/a:1021860301487 · doi:10.1023/a:1021860301487
- 10.1023/a:1022874530586 · doi:10.1023/a:1022874530586
- 10.1023/a:1022849813748 · doi:10.1023/a:1022849813748
- 10.1023/a:1021808317416 · DOI
- 10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s · doi:10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s
- 10.1016/0142-9612(90)90124-9 · DOI · Paper page
- 10.1023/a:1021812418325 · doi:10.1023/a:1021812418325
- 10.1002/app.11605 · DOI · Paper page
- 10.1023/a:1016036302871 · DOI
- R. G.Sinclair “The First Corn Utilization Conference” St. Louis Missouri June 11–12 1987 p.1–16.
- 10.1016/0032-3861(79)90009-0 · DOI · Paper page
- Park J. W., 1999, Korea Polym. J., 7, 93
- Kim H. S., 1998, Korea Polym. J., 6, 422
- 10.1016/0032-3861(96)83146-6 · DOI
- Farmaceutico S., 2003, Lactide/Glycolide Copolymers: Review on Toxicity, Biocompatibility, and Clinical Application (data up to 1999)
- Hartmann M. H., 1999, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 40, 570
- O'Brien M., 2003, Cargill Dow's World‐scale Manufacturing Facility Comes On Line
- O'Brien M., 2003, Biopolymer Industry Moves from Field of Dreams to Reality: Consumer Products Hitting Retail Shelves Across the Globe
- O'Brien M., 2003, First North American Converter Takes Aim at Grocery Industry with NatureWorks™ PLA
- O'Brien M., 2001, Unifi and Cargill Dow Provide Update on NatureWorks™ PLA Development, 2
- 2003, Faerch Plast to Market Food Packaging from Nature
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- NatureWorks™ PLA, 2003, Top It Off With NatureWorks™ PLA. Dairy and Delicatessen Container Lidding Solutions
- 2003, Kanebo Corn Fiber
- Lunt J., 2003, Polylactic Acid Polymers from Corn: Potential Applications in the Textiles Industry
- Arai K., 2001, Biodegradable Lactide and Polyester Copolymers for use in Packaging and Their Film Properties
- Mohan A. M., 2002, Packag. Digest, 30, 34
- Nageroni J., 2001, Flexible Packag., 25
- Michael O. B., 2003, Ilip Launches New Fresh Food Packaging Solution
Cited by
Items 101–200 of 1,031
Compatibilization strategies in poly(lactic acid)-based blends
Zeng, J.-B., Li, K.-A., & Du, A.-K. (2015) · RSC Advances · doi:10.1039/c5ra01655j · Cited by 290
Swetha, T. A., Ananthi, V., Bora, A., Sengottuvelan, N., Ponnuchamy, K., Muthusamy, G., & Arun, A. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123703 · Cited by 288
Auras, R. A., Singh, S. P., & Singh, J. J. (2005) · Packaging Technology and Science · doi:10.1002/pts.692 · Cited by 286
Self-citationStructure and properties of polylactide/natural rubber blends
Bitinis, N., Verdejo, R., Cassagnau, P., & Lopez-Manchado, M. A. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.05.016 · Cited by 274
Zhou, X., Li, Y., Fang, C., Li, S., Cheng, Y., Lei, W., & Meng, X. (2015) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2015.03.002 · Cited by 273
Rudnik, E., & Briassoulis, D. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.12.031 · Cited by 272
Nanotechnology and its applications in lignocellulosic composites, a mini review
Kamel, S. (2007) · Express Polymer Letters · doi:10.3144/expresspolymlett.2007.78 · Cited by 271
“It has gained enormous attention as a replacement for conventional synthetic packaging materials in the last decade [178] but the problem is the amount of transmitter light through the poly (lactic acid) sheet, for reducing this transmitter light, bentonite a layered silicate and microcrystalline cellulose chosen as n…”
BackgroundStoclet, G., Seguela, R., Lefebvre, J.-M., & Rochas, C. (2010) · Macromolecules · doi:10.1021/ma101430c · Cited by 271
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Zhang, K., Nagarajan, V., Misra, M., & Mohanty, A. K. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502337u · Cited by 267
Toughening modification of PLLA/PBS blends via in situ compatibilization
Wang, R., Wang, S., Zhang, Y., Wan, C., & Ma, P. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21210 · Cited by 266
Strain-Induced Molecular Ordering in Polylactide upon Uniaxial Stretching
Stoclet, G., Seguela, R., Lefebvre, J. M., Elkoun, S., & Vanmansart, C. (2010) · Macromolecules · doi:10.1021/ma9024366 · Cited by 266
Mechanical study of PLA–PCL fibers during in vitro degradation
Vieira, A. C., Vieira, J. C., Ferra, J. M., Magalhães, F. D., Guedes, R. M., & Marques, A. T. (2011) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2010.12.006 · Cited by 266
Rheology and extrusion foaming of chain‐branched poly(lactic acid)
Mihai, M., Huneault, M. A., & Favis, B. D. (2010) · Polymer Engineering & Science · doi:10.1002/pen.21561 · Cited by 264
Yang, W., Fortunati, E., Dominici, F., Giovanale, G., Mazzaglia, A., Balestra, G. M., Kenny, J. M., & Puglia, D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.04.003 · Cited by 263
Benwood, C., Anstey, A., Andrzejewski, J., Misra, M., & Mohanty, A. K. (2018) · ACS Omega · doi:10.1021/acsomega.8b00129 · Cited by 262
Phytic acid as a bio-based phosphorus flame retardant for poly(lactic acid) nonwoven fabric
Cheng, X.-W., Guan, J.-P., Tang, R., & Liu, K. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.113 · Cited by 260
Polylactic Acid: Synthesis, Properties and Applications
Avérous, L. (2008) · Monomers, Polymers and Composites from Renewable Resources · doi:10.1016/b978-0-08-045316-3.00021-1 · Cited by 258
Influence of TEMPO-oxidized cellulose nanofibril length on film properties
Fukuzumi, H., Saito, T., & Isogai, A. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.04.069 · Cited by 258
Hassouna, F., Raquez, J.-M., Addiego, F., Dubois, P., Toniazzo, V., & Ruch, D. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.08.001 · Cited by 257
Wasanasuk, K., Tashiro, K., Hanesaka, M., Ohhara, T., Kurihara, K., Kuroki, R., Tamada, T., Ozeki, T., & Kanamoto, T. (2011) · Macromolecules · doi:10.1021/ma2006624 · Cited by 257
A review on the thermomechanical properties and biodegradation behaviour of polyesters
Larrañaga, A., & Lizundia, E. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109296 · Cited by 257
Mini-Review: Biosynthesis of Poly(hydroxyalkanoates)
Lu, J., Tappel, R. C., & Nomura, C. T. (2009) · Polymer Reviews · doi:10.1080/15583720903048243 · Cited by 254
Degradation and Recycling of Films Based on Biodegradable Polymers: A Short Review
Scaffaro, R., Maio, A., Sutera, F., Gulino, E., & Morreale, M. (2019) · Polymers · doi:10.3390/polym11040651 · Cited by 254
Drieskens, M., Peeters, R., Mullens, J., Franco, D., Lemstra, P. J., & Hristova‐Bogaerds, D. G. (2009) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21822 · Cited by 252
Tailoring crystallization: towards high-performance poly(lactic acid)
Liu, G., Zhang, X., & Wang, D. (2014) · Advanced Materials · doi:10.1002/adma.201305413 · Cited by 249
Surface Modification of 3D Printed PLA Objects by Fused Deposition Modeling: A Review
Baran, E. H., & Erbil, H. Y. (2019) · Colloids and Interfaces · doi:10.3390/colloids3020043 · Cited by 248
Biodegradation in Soil of PLA/PBAT Blends Compatibilized with Chain Extender
Palsikowski, P. A., Kuchnier, C. N., Pinheiro, I. F., & Morales, A. R. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-0951-3 · Cited by 247
A new approach in compatibilization of the poly(lactic acid)/thermoplastic starch (PLA/TPS) blends
Akrami, M., Ghasemi, I., Azizi, H., Karrabi, M., & Seyedabadi, M. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.02.035 · Cited by 242
Thermal degradation of polylactic acid (PLA)/polyhydroxybutyrate (PHB) blends: A systematic review
Kervran, M., Vagner, C., Cochez, M., Ponçot, M., Saeb, M. R., & Vahabi, H. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.109995 · Cited by 239
Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review
Fortelny, I., Ujcic, A., Fambri, L., & Slouf, M. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00206 · Cited by 238
Potential of Lignins as Antioxidant Additive in Active Biodegradable Packaging Materials
Domenek, S., Louaifi, A., Guinault, A., & Baumberger, S. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0570-6 · Cited by 238
Towards Controlled Degradation of Poly(lactic) Acid in Technical Applications
Teixeira, S., Eblagon, K. M., Miranda, F., R. Pereira, M. F., & Figueiredo, J. L. (2021) · C · doi:10.3390/c7020042 · Cited by 237
Natural Pectin Polysaccharides as Edible Coatings
Valdés, A., Burgos, N., Jiménez, A., & Garrigós, M. (2015) · Coatings · doi:10.3390/coatings5040865 · Cited by 236
Raquez, J.-M., Murena, Y., Goffin, A.-L., Habibi, Y., Ruelle, B., DeBuyl, F., & Dubois, P. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.11.017 · Cited by 236
Wang, L.-F., Rhim, J.-W., & Hong, S.-I. (2016) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2015.12.062 · Cited by 233
Luzi, F., Fortunati, E., Jiménez, A., Puglia, D., Pezzolla, D., Gigliotti, G., Kenny, J. M., Chiralt, A., & Torre, L. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.01.045 · Cited by 233
Nagarajan, V., Zhang, K., Misra, M., & Mohanty, A. K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01145 · Cited by 232
Arrieta, M. P., Samper, M. D., López, J., & Jiménez, A. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-014-0654-y · Cited by 229
The second green revolution? Production of plant-based biodegradable plastics
Mooney, B. P. (2009) · Biochemical Journal · doi:10.1042/bj20081769 · Cited by 227
Toward Sustainable Wearable Electronic Textiles
Dulal, M., Afroj, S., Ahn, J., Cho, Y., Carr, C., Kim, I.-D., & Karim, N. (2022) · ACS Nano · doi:10.1021/acsnano.2c07723 · Cited by 227
A Study of the Crystallization, Melting, and Foaming Behaviors of Polylactic Acid in Compressed CO2
Zhai, W., Ko, Y., Zhu, W., Wong, A., & Park, C. B. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10125381 · Cited by 227
Comparison of sorbitol and glycerol as plasticizers for thermoplastic starch in TPS/PLA blends
Li, H., & Huneault, M. A. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.32956 · Cited by 226
Fortunati, E., Peltzer, M., Armentano, I., Jiménez, A., & Kenny, J. M. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.03.025 · Cited by 225
Xiong, Z., Yang, Y., Feng, J., Zhang, X., Zhang, C., Tang, Z., & Zhu, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.09.007 · Cited by 222
Influence of formamide and water on the properties of thermoplastic starch/poly(lactic acid) blends
Wang, N., Yu, J., Chang, P. R., & Ma, X. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.025 · Cited by 221
Fernández, J., Etxeberria, A., & Sarasua, J.-R. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.01.003 · Cited by 217
Synthesis, properties, and applications of polylactic acid‐based polymers
Ramezani Dana, H., & Ebrahimi, F. (2023) · Polymer Engineering & Science · doi:10.1002/pen.26193 · Cited by 217
Sawpan, M. A., Pickering, K. L., & Fernyhough, A. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.05.003 · Cited by 217
State of the art and future prospectives of poly(lactic acid) based blends and composites
Sangeetha, V. H., Deka, H., Varghese, T. O., & Nayak, S. K. (2018) · Polymer Composites · doi:10.1002/pc.23906 · Cited by 216
Improved barrier properties of poly(lactic acid) with randomly dispersed graphene oxide nanosheets
Huang, H.-D., Ren, P.-G., Xu, J.-Z., Xu, L., Zhong, G.-J., Hsiao, B. S., & Li, Z.-M. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.04.009 · Cited by 216
Fortunati, E., Luzi, F., Puglia, D., Petrucci, R., Kenny, J. M., & Torre, L. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.01.075 · Cited by 216
Recommendations for replacing PET on packaging, fiber, and film materials with biobased counterparts
Sousa, A. F., Patrício, R., Terzopoulou, Z., Bikiaris, D. N., Stern, T., Wenger, J., Loos, K., Lotti, N., Siracusa, V., Szymczyk, A., et al. (2021) · Green Chemistry · doi:10.1039/d1gc02082j · Cited by 215
Poly lactic acid (PLA) polymers: from properties to biomedical applications
Ebrahimi, F., & Ramezani Dana, H. (2022) · International Journal of Polymeric Materials and Polymeric Biomaterials · doi:10.1080/00914037.2021.1944140 · Cited by 214
Wu, X., Ma, Y., Zhang, G., Chu, Y., Du, J., Zhang, Y., Li, Z., Duan, Y., Fan, Z., & Huang, J. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404535 · Cited by 212
Review on the Biological Degradation of Polymers in Various Environments
Kliem, S., Kreutzbruck, M., & Bonten, C. (2020) · Materials · doi:10.3390/ma13204586 · Cited by 211
Life cycle assessment of recycling options for polylactic acid
Maga, D., Hiebel, M., & Thonemann, N. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.05.018 · Cited by 211
Chemical Modification and Foam Processing of Polylactide (PLA)
Standau, T., Zhao, C., Murillo Castellón, S., Bonten, C., & Altstädt, V. (2019) · Polymers · doi:10.3390/polym11020306 · Cited by 210
“PLA is well known as the most promising bio-based and biodegradable polymer with properties and processability that come close to those of (i) PS [6,12,13] and (ii) polyvinyl chloride (PVC), PE, or PP when plasticized with its own monomers [12].”
BackgroundEffect of an organo-modified montmorillonite on PLA crystallization and gas barrier properties
Picard, E., Espuche, E., & Fulchiron, R. (2011) · Applied Clay Science · doi:10.1016/j.clay.2011.04.023 · Cited by 209
Lignin from Micro- to Nanosize: Applications
Beisl, S., Friedl, A., & Miltner, A. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18112367 · Cited by 207
Green Composites Made of Bamboo Fabric and Poly (Lactic) Acid for Packaging Applications—A Review
Nurul Fazita, M. R., Jayaraman, K., Bhattacharyya, D., Mohamad Haafiz, M. K., Saurabh, C., Hussin, M., & H.P.S., A. (2016) · Materials · doi:10.3390/ma9060435 · Cited by 206
“There are several advantages to PLA, such as it is obtained from a renewable agricultural source (corn), its production utilizes carbon dioxide and offers significant energy savings, it is recyclable and compostable (under the right conditions), as well as its physical and mechanical properties can be manipulated thro…”
BackgroundRenewable polymers and plastics: Performance beyond the green
Pellis, A., Malinconico, M., Guarneri, A., & Gardossi, L. (2021) · New Biotechnology · doi:10.1016/j.nbt.2020.10.003 · Cited by 205
Lizundia, E., Fortunati, E., Dominici, F., Vilas, J. L., León, L. M., Armentano, I., Torre, L., & Kenny, J. M. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.01.041 · Cited by 203
Overview of Bioplastic Introduction and Its Applications in Product Packaging
Ibrahim, N. I., Shahar, F. S., Sultan, M. T. H., Shah, A. U. M., Safri, S. N. A., & Mat Yazik, M. H. (2021) · Coatings · doi:10.3390/coatings11111423 · Cited by 201
Bio-Based Polymers with Antimicrobial Properties towards Sustainable Development
Muñoz-Bonilla, A., Echeverria, C., Sonseca, Á., Arrieta, M. P., & Fernández-García, M. (2019) · Materials · doi:10.3390/ma12040641 · Cited by 200
Ameli, A., Jahani, D., Nofar, M., Jung, P. U., & Park, C. B. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.10.019 · Cited by 200
Arrieta, M. P., López, J., López, D., Kenny, J. M., & Peponi, L. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.10.036 · Cited by 200
Afshar, S. V., Boldrin, A., Astrup, T. F., Daugaard, A. E., & Hartmann, N. B. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.140000 · Cited by 201
Biomass to biodegradable polymer (PLA)
Singhvi, M., & Gokhale, D. (2013) · RSC Advances · doi:10.1039/c3ra41592a · Cited by 198
Nair, S. S., Chen, H., Peng, Y., Huang, Y., & Yan, N. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01405 · Cited by 198
Thermal, mechanical and rheological properties of poly (lactic acid)/epoxidized soybean oil blends
Ali, F., Chang, Y.-W., Kang, S. C., & Yoon, J. Y. (2009) · Polymer Bulletin · doi:10.1007/s00289-008-1012-9 · Cited by 197
Oxidative degradation of polylactide (PLA) and its effects on physical and mechanical properties
Rasselet, D., Ruellan, A., Guinault, A., Miquelard-Garnier, G., Sollogoub, C., & Fayolle, B. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.10.011 · Cited by 196
Arrieta, M. P., Castro-López, M. D. M., Rayón, E., Barral-Losada, L. F., López-Vilariño, J. M., López, J., & González-Rodríguez, M. V. (2014) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf5029812 · Cited by 196
Natural and Synthetic Bioinks for 3D Bioprinting
Khoeini, R., Nosrati, H., Akbarzadeh, A., Eftekhari, A., Kavetskyy, T., Khalilov, R., Ahmadian, E., Nasibova, A., Datta, P., Roshangar, L., et al. (2021) · Advanced NanoBiomed Research · doi:10.1002/anbr.202000097 · Cited by 196
Ferreira, F. V., Dufresne, A., Pinheiro, I. F., Souza, D. H. S., Gouveia, R. F., Mei, L. H. I., & Lona, L. M. F. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.08.045 · Cited by 196
Preparation and properties of short natural fiber reinforced poly(lactic acid) composites
YU, T., LI, Y., & REN, J. (2009) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(10)60126-4 · Cited by 194
Deng, Y., Yu, C., Wongwiwattana, P., & Thomas, N. L. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-018-1256-x · Cited by 193
“In the growing bio-based economy, poly(lactic acid) (PLA) is one of the most prominent thermoplastics [4].”
BackgroundKijchavengkul, T., & Auras, R. (2008) · Polymer International · doi:10.1002/pi.2420 · Cited by 193
Self-citationCrops: A Green Approach toward Self-Assembled Soft Materials
Vemula, P. K., & John, G. (2008) · Accounts of Chemical Research · doi:10.1021/ar7002682 · Cited by 193
Ionic liquids in the biorefinery: a critical assessment of their potential
Stark, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00246a · Cited by 193
Rare-earth metal complexes as catalysts for ring-opening polymerization of cyclic esters
Lyubov, D. M., Tolpygin, A. O., & Trifonov, A. A. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.04.013 · Cited by 193
Blending poly(butylene succinate) with poly(lactic acid): Ductility and phase inversion effects
Deng, Y., & Thomas, N. L. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.08.029 · Cited by 191
Murariu, M., Da Silva Ferreira, A., Alexandre, M., & Dubois, P. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1131 · Cited by 190
“) 1020 (100) 11 (3) ) 720 (90) 36 (5) ) 710 (50) 77 (44) ) 670 (120) 78 (33) ) 970 (70) 11 (4) ) 590 (50) 221 (8) ) 270 (20) 317 (4) ) 760 (140) 8 (2) ) 590 (110) 223 (19) ) 10 (3) 443 (13)”
Abraham, A., Park, H., Choi, O., & Sang, B.-I. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2020.124537 · Cited by 190
Improvements in the crystallinity and mechanical properties of PLA by nucleation and annealing
Simmons, H., Tiwary, P., Colwell, J. E., & Kontopoulou, M. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.06.001 · Cited by 190
Ho, C.-H., Wang, C.-H., Lin, C.-I., & Lee, Y.-D. (2008) · Polymer · doi:10.1016/j.polymer.2008.06.054 · Cited by 190
Innovations to decarbonize materials industries
Daehn, K., Basuhi, R., Gregory, J., Berlinger, M., Somjit, V., & Olivetti, E. A. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00376-y · Cited by 189
Luzi, F., Torre, L., Kenny, J. M., & Puglia, D. (2019) · Materials · doi:10.3390/ma12030471 · Cited by 189
Preparation and characterization of thermoplastic starch/PLA blends by one‐step reactive extrusion
Wang, N., Yu, J., & Ma, X. (2007) · Polymer International · doi:10.1002/pi.2302 · Cited by 189
Chu, Z., Zhao, T., Li, L., Fan, J., & Qin, Y. (2017) · Materials · doi:10.3390/ma10060659 · Cited by 189
“As a consequence, these advantages give PLA the best potential for packaging and medical applications [6,8].”
BackgroundExtrusion Foaming of Semi‐Crystalline PLA and PLA/Thermoplastic Starch Blends
Mihai, M., Huneault, M. A., Favis, B. D., & Li, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700080 · Cited by 188
Nofar, M., Salehiyan, R., Ciftci, U., Jalali, A., & Durmuş, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107661 · Cited by 188
Yang, W., Weng, Y., Puglia, D., Qi, G., Dong, W., Kenny, J. M., & Ma, P. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.12.085 · Cited by 188
UV protective poly(lactic acid)/rosin films for sustainable packaging
Narayanan, M., Loganathan, S., Valapa, R. B., Thomas, S., & Varghese, T. O. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.01.152 · Cited by 188
Olonisakin, K., fan, M., Xin-Xiang, Z., Ran, L., Lin, W., Zhang, W., & Wenbin, Y. (2022) · Composite Interfaces · doi:10.1080/09276440.2021.1878441 · Cited by 185
Thermoplastic Starch (TPS)/Polylactic Acid (PLA) Blending Methodologies: A Review
Martinez Villadiego, K., Arias Tapia, M. J., Useche, J., & Escobar Macías, D. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02207-1 · Cited by 185
Wang, J., Zhu, W., Zhang, H., & Park, C. B. (2012) · Chemical Engineering Science · doi:10.1016/j.ces.2012.02.051 · Cited by 185
Aytac, Z., Kusku, S. I., Durgun, E., & Uyar, T. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.02.063 · Cited by 183
Shi, J., Wang, J., Lv, J., Wang, Z., Peng, Y., Shang, J., & Wang, X. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.156471 · Cited by 183
Electrospinning of Poly(lactic acid) Stereocomplex Nanofibers
Tsuji, H., Nakano, M., Hashimoto, M., Takashima, K., Katsura, S., & Mizuno, A. (2006) · Biomacromolecules · doi:10.1021/bm060786e · Cited by 182
Idris, A., & Bukhari, A. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.10.002 · Cited by 181
Metadata
- Authors
- Auras, R., Harte, B., & Selke, S.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Auras, Rafael
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2004-08-24
- Volume
- 4
- Issue
- 9
- Pages
- 835-864
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2054432898
- Cited by
- 3,454
- References
- 240
- Citations by year
- 2026: 160 · 2025: 172 · 2024: 191 · 2023: 196 · 2022: 237 · 2021: 258 · 2020: 202 · 2019: 204 · 2018: 191 · 2017: 227 · 2016: 198 · 2015: 212 · 2014: 183 · 2013: 185 · 2012: 149
- FWCI
- 2.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- polylactic acid, biodegradable packaging, PLA films, mechanical properties, glass transition temperature, water sorption, solubility parameter, gas permeability, barrier properties, food contact safety, bio-based polymers
- MeSH terms
- Biocompatible Materials, Biotechnology, Diffusion, Glass, Hot Temperature, Models, Chemical, Polyesters, Polymers, Solubility, Spectrophotometry, Temperature, Thermodynamics, Time Factors, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.