An Overview of Polylactides as Packaging Materials
The DOI matches its Crossref record; 245 of the 245 references it cites were found in a registry or an index.
Abstract
Summary: Polylactide polymers have gained enormous attention as a replacement for conventional synthetic packaging materials in the last decade. By being truly biodegradable, derived from renewable resources and by providing consumers with extra end‐use benefits such as avoiding paying the “green tax” in Germany or meeting environmental regulations in Japan, polylactides (PLAs) are a growing alternative as a packaging material for demanding markets. The aim of this paper is to review the production techniques for PLAs, summarize the main properties of PLA and to delineate the main advantages and disadvantages of PLA as a polymeric packaging material. PLA films have better ultraviolet light barrier properties than low density polyethylene (LDPE), but they are slightly worse than those of cellophane, polystyrene (PS) and poly(ethylene terephthalate) (PET). PLA films have mechanical properties comparable to those of PET and better than those of PS. PLA also has lower melting and glass transition temperatures than PET and PS. The glass transition temperature of PLA changes with time. Humidity between 10 and 95% and storage temperatures of 5 to 40 °C do not have an effect on the transition temperature of PLA, which can be explained by its low water sorption values (i.e. <100 ppm at A w = 1). PLA seals well at temperatures below the melting temperature but an appreciable shrinking of the films has been noted when the material is sealed near its melting temperature. Solubility parameter predictions indicate that PLA will interact with nitrogen compounds, anhydrides and some alcohols and that it will not interact with aromatic hydrocarbons, ketones, esters, sulfur compounds or water. The CO 2 , O 2 and water permeability coefficients of PLA are lower than those of PS and higher than those of PET. Its barrier to ethyl acetate and D ‐limonene is comparable to PET. The amount of lactic acid and its derivatives that migrate to food simulant solutions from PLA is much lower than any of the current average dietary lactic acid intake values allowed by several governmental agencies. Thus, PLA is safe for use in fabricating articles for contact with food. Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films. image Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For the sustained delivery of bioactive compounds, LA and glycolic acid were already proposed as bioresorbable matrices in 1973 [89].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [89]
In the citing paper
“However, the rate of the PLA crystallization is slow (Auras et al., 2004;Liu et al., 2014;Murariu et al., 2015;Zhang et al., 2018), frequently slower than the cooling rate used in common polymer processing devices (Zhang et al., 2018).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Therefore, commercial PLA's are semicrystalline with melting temperature, T m , between 140 and 180 • C in dependence on the enantiomeric purity (Fambri and Migliaresi, 2010) and glass transition temperature, T g , which usually ranges from 55 to 65 • C (Auras et al., 2004;Krishnan et al., 2016).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Some recent studies showed that, by adding bacteria and substrate-degrading enzymes for simultaneous saccharification and fermentation, starch or cellulosic biomass can be saccharified and simultaneously converted into lactic acid; this process can be used as a replacement for the above-mentioned traditional fermentation steps [28,29].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [28]
In the citing paper
“The relative reactivity towards the monomers is important for the formation of block copolymers which are typically produced by sequential addition. [19]”
From Master of Chaos and Order: Opposite Microstructures of PCL‐co‐PGA‐co‐PLA Accessible by a Single Catalyst** (2022) · cites this paper as [19]
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Research works printed but not linked: 65
- Aluminum Association, 1999, Tokyo Steps up to Recycling Efforts
- Mochizuki M., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 1
- Tsuji H., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 129
- Gruber P. R., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 235
- Kawahima N., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 251
- 10.1111/j.1574-6976.1995.tb00168.x · doi:10.1111/j.1574-6976.1995.tb00168.x · Paper page
- N.Whiteman “2000 Polymers Laminations and Coatings Conference” Chicago IL2000 p.631–635.
- J. B.Snook M.Sc. Thesis Michigan State University East Lansing1994 p.130.
- Perego G., 1996, Polymer, 59, 37
- M. H.Hartmann N.Whiteman “TAPPI Polymers Laminations & Coatings Conference” Chicago IL United States2000 p.467–474.
- Leaversuch R. D., 2003, Plastics Technology
- Baillie J., 1997, Packag. Week, 13
- O'Brien M., 2003, Ilip Launches New Fresh Food Packaging Solution
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- Kharas G. B., 1994, Plastics from Microbes, 93
- D. R.Witzke Ph.D. Thesis Michigan State University East Lansing MI1997 p.389.
- 10.1016/0032-3861(81)90256-1 · DOI
- 10.1016/0032-3861(95)93647-5 · DOI · Paper page
- Huang J., 1996, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 37, 370
- Rappard P., 1997, Packag. Rev. S. Afr., 23, 19
- Farrer K. T. H., 1983, Packag. News
- Dunkley W. L., 1963, Milk Dealer, 52, 52
- R.Auras Ph.D. Thesis Michigan State University East Lansing2004 p.268.
- VanKrevelen D. W., 1997, Properties of Polymers
- Ou X., 2003, ANTEC 2003, 1701
- Doi Y., 1994, Biodegradable Plastics and Polymers: Proceedings of the Third International Scientific Workshop on Biodegradable Plastics and Polymers, Osaka, Japan (Studies in Polymer Science, 12), 464
- J. R.Dorgan J.Randal J.Janzen D.Knauss B.Braun P.Gruber “Global Plastics Environmental Conference 2004” Detroit MI February 18–192004.
- Cargill‐Dow‐LLC, PLA Polymer 4042D – A NatureWorks Product. Biaxially Oriented Films – General Purpose
- D. M.Bigg “Annual Technical Conference – Society of Plastics Engineers” 1996 p.2028–2039.
- Barton A. F. M., 1999, Handbook of Solubility Parameters and Other Cohesion Parameters
- Hansen C. M., 1967, J. Paint Technol., 39, 511
- Rocha G., 1992, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 33, 454
- Pauly S., 1999, Polymer Handbook, 547
- Siparsky G. L., 1997, J. Environ. Polym. Degrad., 5, 125, 10.1007/bf02763656 · DOI · Paper page
- N.Whiteman P.DeLassus J.Gunderson “Polymers Laminations & Coatings Conference Proceeding Polyolefins 2002 International Conference on Polyolefins” Houston Texas USA February 24–27 2002.
- 10.1023/a:1021869530253 · doi:10.1023/a:1021869530253
- 10.1023/a:1021860301487 · doi:10.1023/a:1021860301487
- 10.1023/a:1022874530586 · doi:10.1023/a:1022874530586
- 10.1023/a:1022849813748 · doi:10.1023/a:1022849813748
- 10.1023/a:1021808317416 · DOI
- 10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s · doi:10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s
- 10.1016/0142-9612(90)90124-9 · DOI · Paper page
- 10.1023/a:1021812418325 · doi:10.1023/a:1021812418325
- 10.1002/app.11605 · DOI · Paper page
- 10.1023/a:1016036302871 · DOI
- R. G.Sinclair “The First Corn Utilization Conference” St. Louis Missouri June 11–12 1987 p.1–16.
- 10.1016/0032-3861(79)90009-0 · DOI · Paper page
- Park J. W., 1999, Korea Polym. J., 7, 93
- Kim H. S., 1998, Korea Polym. J., 6, 422
- 10.1016/0032-3861(96)83146-6 · DOI
- Farmaceutico S., 2003, Lactide/Glycolide Copolymers: Review on Toxicity, Biocompatibility, and Clinical Application (data up to 1999)
- Hartmann M. H., 1999, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 40, 570
- O'Brien M., 2003, Cargill Dow's World‐scale Manufacturing Facility Comes On Line
- O'Brien M., 2003, Biopolymer Industry Moves from Field of Dreams to Reality: Consumer Products Hitting Retail Shelves Across the Globe
- O'Brien M., 2003, First North American Converter Takes Aim at Grocery Industry with NatureWorks™ PLA
- O'Brien M., 2001, Unifi and Cargill Dow Provide Update on NatureWorks™ PLA Development, 2
- 2003, Faerch Plast to Market Food Packaging from Nature
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- NatureWorks™ PLA, 2003, Top It Off With NatureWorks™ PLA. Dairy and Delicatessen Container Lidding Solutions
- 2003, Kanebo Corn Fiber
- Lunt J., 2003, Polylactic Acid Polymers from Corn: Potential Applications in the Textiles Industry
- Arai K., 2001, Biodegradable Lactide and Polyester Copolymers for use in Packaging and Their Film Properties
- Mohan A. M., 2002, Packag. Digest, 30, 34
- Nageroni J., 2001, Flexible Packag., 25
- Michael O. B., 2003, Ilip Launches New Fresh Food Packaging Solution
Cited by
Items 901–1,000 of 1,031
Shozui, F., Matsumoto, K., Motohashi, R., Sun, J., Satoh, T., Kakuchi, T., & Taguchi, S. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.01.007 · Cited by 59
Canetti, M., Cacciamani, A., & Bertini, F. (2014) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23544 · Cited by 61
Mahjoubi, H., Kinsella, J. M., Murshed, M., & Cerruti, M. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502752j · Cited by 59
Tan, B., & Thomas, N. L. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.02.014 · Cited by 59
Polylactide/cellulose nanocrystals: The in situ polymerization approach to improved nanocomposites
Gazzotti, S., Farina, H., Lesma, G., Rampazzo, R., Piergiovanni, L., Ortenzi, M. A., & Silvani, A. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.07.014 · Cited by 59
Stoclet, G., Lefebvre, J., Yeniad, B., du Sart, G. G., & de Vos, S. (2017) · Polymer · doi:10.1016/j.polymer.2017.11.071 · Cited by 59
Gabirondo, E., Sangroniz, A., Etxeberria, A., Torres‐Giner, S., & Sardón, H. (2020) · Polymer Chemistry · doi:10.1039/d0py00088d · Cited by 59
Rojas‐Lema, S., Quiles‐Carrillo, L., García‐García, D., Meléndez-Rodríguez, B., Balart, R., & Torres‐Giner, S. (2020) · Molecules · doi:10.3390/molecules25081976 · Cited by 59
Effect of preparation method on the properties of polylactide/cellulose nanocrystal nanocomposites
Arslan, D., Vatansever, E., Sarul, D. S., Kahraman, Y. S., Güneş, G., Durmuş, A., & Nofar, M. (2020) · Polymer Composites · doi:10.1002/pc.25701 · Cited by 59
Non-Fickian Diffusion of Water in Polylactide
Davis, E. M., Minelli, M., Baschetti, M. G., & Elabd, Y. A. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie302342m · Cited by 59
Protection of marble surfaces by using biodegradable polymers as coating agent
Ocak, Y., Sofuoǧlu, A., Tıhmınlıoğlu, F., & Böke, H. (2009) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2009.07.007 · Cited by 59
Arrieta, M. P., & Peponi, L. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.02.028 · Cited by 58
Biopolymers‐Based Proton Exchange Membranes For Fuel Cell Applications: A Comprehensive Review
Abouricha, S., Aziam, H., Noukrati, H., Sel, O., Saadoune, I., Lahcini, M., & Youcef, H. B. (2024) · ChemElectroChem · doi:10.1002/celc.202300648 · Cited by 58
Muthuraj, R., Misra, M., & Mohanty, A. K. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-373-7.00014-7 · Cited by 59
Sugai, N., Asai, S., Tezuka, Y., & Yamamoto, T. (2015) · Polymer Chemistry · doi:10.1039/c5py00158g · Cited by 58
Recycling PLA to multifunctional oligomeric compatibilizers for PLA/starch composites
Wu, D., & Hakkarainen, M. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.01.004 · Cited by 58
Ligot, S., Bousser, É., Cossement, D., Klemberg-Sapieha, J. E., Viville, P., Dúbois, P., & Snyders, R. (2015) · Plasma Processes and Polymers · doi:10.1002/ppap.201400162 · Cited by 58
Jing, X., Mi, H.-Y., Salick, M. R., Cordie, T., Crone, W. C., Peng, X.-F., & Turng, L.-S. (2014) · Journal of Cellular Plastics · doi:10.1177/0021955x14525959 · Cited by 53
Quantitative Nanomechanical Investigation on Deformation of Poly(lactic acid)
Liu, H., Chen, N., Fujinami, S., Louzguine, D. V., Nakajima, K., & Nishi, T. (2012) · Macromolecules · doi:10.1021/ma301961h · Cited by 58
de Dicastillo, C. L., Garrido, L., Alvarado, N., Romero, J., Palma, J. L., & Galotto, M. J. (2017) · Nanomaterials · doi:10.3390/nano7050106 · Cited by 58
Kumar, R., Kumari, S., Rai, B., Das, R. K., & Kumar, G. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab5755 · Cited by 58
Sepúlveda-Carter, J., Villegas, C., Torres, A., Vargas, E., Rodríguez, F. J., Baltazar, S. E., Prada, A., Rojas, A., Romero, J., Faba, S., et al. (2020) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2020.104844 · Cited by 58
Soil burial-induced chemical and thermal changes in starch/poly (lactic acid) composites
Lv, S., Zhang, Y., Gu, J., & Tan, H. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.02.139 · Cited by 57
Kim, D. Y., Lee, J. B., & Lee, D. Y. (2022) · Macromolecules · doi:10.1021/acs.macromol.1c02074 · Cited by 57
Lekrine, A., Belaadi, A., Dembri, I., Jawaid, M., Ismail, A. S., Abdullah, M. M. S., Chai, B. X., Al-Khawlani, A., & Ghernaout, D. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.06.033 · Cited by 58
Othman, N., Xu, C., Mehrkhodavandi, P., & Hatzikiriakos, S. G. (2012) · Polymer · doi:10.1016/j.polymer.2012.03.068 · Cited by 57
Crystallization behavior of linear 1-arm and 2-arm poly(l-lactide)s: Effects of coinitiators
Tsuji, H., Sugiura, Y., Sakamoto, Y., Bouapao, L., & Itsuno, S. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.029 · Cited by 57
Julien, J. M., Quantin, J.-C., Bénézet, J., Bergeret, A., Lacrampe, M., & Krawczak, P. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.03.011 · Cited by 57
Vogel, C., Wessel, E., & Siesler, H. W. (2008) · Macromolecules · doi:10.1021/ma800139u · Cited by 57
Enzymatic degradation behavior of nanoclay reinforced biodegradable PLA/PBSA blend composites
Malwela, T., & Ray, S. S. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.03.018 · Cited by 57
Wang, X., Brosmer, J. L., Thevenon, A., & Diaconescu, P. L. (2015) · Organometallics · doi:10.1021/acs.organomet.5b00442 · Cited by 50
Lizundia, E., Ruiz‐Rubio, L., Vilas‐Vilela, J. L., & León, L. M. (2016) · RSC Advances · doi:10.1039/c5ra24604k · Cited by 57
PLA /functionalized‐gum arabic based bionanocomposite films for high gas barrier applications
Tripathi, N., & Katiyar, V. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43458 · Cited by 57
Synthesis of a novel polyphosphate and its application with APP in flame retardant PLA
Liu, T., Jing, J., Zhang, Y., & Fang, Z. (2018) · RSC Advances · doi:10.1039/c7ra12582h · Cited by 57
Relaxation and crystal nucleation in polymer glasses
Androsch, R., Zhuravlev, E., Schmelzer, J. W. P., & Schick, C. H. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.03.026 · Cited by 57
Recent developments in microbial polyester fiber and polysaccharide ester derivative research
Iwata, T., Gan, H., Togo, A., & Fukata, Y. (2020) · Polymer Journal · doi:10.1038/s41428-020-00404-8 · Cited by 57
Hydrolytic Degradation of Amorphous Films of L ‐Lactide Copolymers with Glycolide and D ‐Lactide
Saha, S. K., & Tsuji, H. (2006) · Macromolecular Materials and Engineering · doi:10.1002/mame.200500386 · Cited by 57
Lipase-Catalyzed Ring-Opening Polymerization of theO-Carboxylic Anhydride Derived from Lactic Acid
Bonduelle, C. V., Martín-Vaca, B. M., & Bourissou, D. (2009) · Biomacromolecules · doi:10.1021/bm9007343 · Cited by 57
Preparation and properties of nanodiamond/poly(lactic acid) composite nanofiber scaffolds
Cai, N., Dai, Q., Wang, Z., Luo, X., Xue, Y., & Yu, F. (2014) · Fibers and Polymers · doi:10.1007/s12221-014-2544-2 · Cited by 57
Schneider, J., Manjure, S., & Narayan, R. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43310 · Cited by 56
Hou, B., Wang, Y., Li, B., Li, N., Yang, D., Liu, H., & Li, J. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.145563 · Cited by 56
Reshma, C. S., Remya, S., & Bindu, J. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.137905 · Cited by 58
Biodegradable Polyesters: Synthesis, Properties, Applications
Zhang, C. (2015) · Wiley eBooks · doi:10.1002/9783527656950.ch1 · Cited by 56
Biodegradability Testing of Compostable Polymer Materials
Rudnik, E. (2012) · Elsevier eBooks · doi:10.1016/b978-1-4557-2834-3.00011-2 · Cited by 56
Lebarbé, T., Ibarboure, E., Gadenne, B., Alfos, C., & Cramail, H. (2013) · Polymer Chemistry · doi:10.1039/c3py00300k · Cited by 56
Fang, H., Zhang, Y., Bai, J., Wang, Z., & Wang, Z. (2013) · RSC Advances · doi:10.1039/c3ra40879e · Cited by 56
Biopolymer-Based Lightweight Materials for Packaging Applications
Hu, B. S. (2014) · ACS symposium series · doi:10.1021/bk-2014-1175.ch013 · Cited by 56
Shabanian, M., Hajibeygi, M., Hedayati, K., Khaleghi, M., & Khonakdar, H. A. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.08.059 · Cited by 56
Yu, S., Xiang, H., Zhou, J., & Zhu, M. (2018) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2018.09.002 · Cited by 57
A Study on Mechanical and Thermal Properties of PLA/PEO Blends
Eom, Y., Choi, B., & Park, S. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-018-1344-y · Cited by 56
García‐Arroyo, P., Arrieta, M. P., García‐García, D., Cuervo‐Rodríguez, R., Fombuena, V., Mancheño, M. J., & Segura, J. L. (2020) · Polymer · doi:10.1016/j.polymer.2020.122466 · Cited by 56
Vaňková, E., Kašparová, P., Khun, J., Machková, A., Julák, J., Sláma, M., Hodek, J., Ulrychová, L., Weber, J., Obrová, K., et al. (2020) · PeerJ · doi:10.7717/peerj.10259 · Cited by 56
Toughening Modification of Polylactic Acid by Thermoplastic Silicone Polyurethane Elastomer
Sun, M., Huang, S., Yu, M., & Han, K. (2021) · Polymers · doi:10.3390/polym13121953 · Cited by 56
An effect of lactic acid oligomers on the barrier properties of polylactide
Ambrosio‐Martín, J., Fabra, M. J., López‐Rubio, A., & Lagaron, J. M. (2014) · Journal of Materials Science · doi:10.1007/s10853-013-7929-x · Cited by 56
Rational redesign of Candida antarctica lipase B for the ring opening polymerization of d,d-lactide
Takwa, M., Larsen, M. W., Hult, K., & Martinelle, M. (2011) · Chemical Communications · doi:10.1039/c1cc10865d · Cited by 56
Chariyachotilert, C., Joshi, S., Selke, S. E. M., & Auras, R. A. (2012) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087911434337 · Cited by 57
Self-citationArrieta, M. P., Sessini, V., & Peponi, L. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.06.047 · Cited by 55
Agüero, Á., Perianes, E. C., Muelas, S. S. A. D. L., Lascano, D., García-Soto, M. D. M. D. L. F., Peltzer, M. A., Balart, R., & Arrieta, M. P. (2023) · Polymers · doi:10.3390/polym15020285 · Cited by 55
Sahithya, K., Das, D., & Das, N. (2015) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2015.08.013 · Cited by 55
PLA and Montmorilonite Nanocomposites: Properties, Biodegradation and Potential Toxicity
Souza, P. M. S., Morales, A. R., Marin‐Morales, M. A., & Mei, L. H. I. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0577-z · Cited by 55
Zhang, K., Ran, X., Wang, X., Han, C., Han, L., Wen, X., Zhuang, Y., & Dong, L. (2011) · Polymer Engineering and Science · doi:10.1002/pen.22009 · Cited by 55
Blends of biorenewable polyamide-11 and polyamide-6,10
Ruehle, D. A., Perbix, C., Castañeda, M., Dorgan, J. R., Mittal, V., Halley, P. J., & Martin, D. J. (2013) · Polymer · doi:10.1016/j.polymer.2013.10.013 · Cited by 55
Camarero‐Espinosa, S., Boday, D. J., Weder, C., & Foster, E. J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.41607 · Cited by 50
Tabthong, S., Nanok, T., Kongsaeree, P., Prabpai, S., & Hormnirun, P. (2014) · Dalton Trans. · doi:10.1039/c3dt52455h · Cited by 50
Clark, L., Deacon, G. B., Forsyth, C. M., Junk, . C., Mountford, P., Townley, J. P., & Wang, J. (2013) · Dalton Transactions · doi:10.1039/c3dt00065f · Cited by 55
Parize, D. D. D. S., de Oliveira, J. E., Mitsuyuki, M. C., Marconcini, J. M., & Mattoso, L. H. C. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43379 · Cited by 56
Wu, T., Tong, Y., Qiu, F., Yuan, D., Zhang, G., & Qu, J. (2017) · Polymers for Advanced Technologies · doi:10.1002/pat.4087 · Cited by 55
Rosli, N. A., Ahmad, I. B., Anuar, F. H., & Abdullah, I. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.119 · Cited by 55
Transesterification of Isosorbide with Dimethyl Carbonate Catalyzed by Task‐Specific Ionic Liquids
Qian, W., Tan, X., Su, Q., Cheng, W., Xu, F., Dong, L., & Zhang, S. (2019) · ChemSusChem · doi:10.1002/cssc.201802572 · Cited by 55
Triwulandari, E., Ghozali, M., Sondari, D., Septiyanti, M., Sampora, Y., Meliana, Y., Fahmiati, S., Restu, W. K., & Haryono, A. (2019) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1080/14658011.2018.1562746 · Cited by 55
Switchable Ring‐Opening Polymerization by a Ferrocene Supported Aluminum Complex
Lai, A. J., Hern, Z. C., & Diaconescu, P. L. (2019) · ChemCatChem · doi:10.1002/cctc.201900747 · Cited by 55
Crystallization of polylactide-based green composites filled with oil-rich waste fillers
Mysiukiewicz, O., & Barczewski, M. (2020) · Journal of Polymer Research · doi:10.1007/s10965-020-02337-5 · Cited by 55
Nanostructured Phase Morphology of a Biobased Copolymer for Tough and UV-Resistant Polylactide
Xu, H., Zhou, J., Odelius, K., Guo, Z., Guan, X., & Hakkarainen, M. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00057 · Cited by 55
Sustainability and Polyesters: Beyond Metals and Monomers to Function and Fate
Hoe, G. X. D., Şucu, T., & Shaver, M. P. (2022) · Accounts of Chemical Research · doi:10.1021/acs.accounts.2c00134 · Cited by 57
Crystallization of amorphous poly(lactic acid) induced by organic solvents
Naga, N., Yoshida, Y., Inui, M., Noguchi, K., & Murase, S. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32890 · Cited by 55
Zhang, S., Feng, X., Zhu, S., Huan, Q., Han, K., Ma, Y., & Yu, M. (2013) · Materials Letters · doi:10.1016/j.matlet.2012.12.019 · Cited by 54
Synthesis of a Biodegradable PLA: NMR Signal Deconvolution and End-Group Analysis
Pérez, J. M., Ruiz‐Martínez, C., & Fernández, I. (2021) · Journal of Chemical Education · doi:10.1021/acs.jchemed.1c00824 · Cited by 54
Vijayarajan, S., Selke, S. E. M., & Matuana, L. M. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300226 · Cited by 54
Self-citationMacroscopic analysis of interfacial properties of flax/PLLA biocomposites
Duigou, A. L., Davies, P., & Baley, C. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.06.001 · Cited by 54
Blanco, I., & Siracusa, V. (2012) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-012-2535-8 · Cited by 54
López‐Gil, A., Rodríguez‐Pérez, M. Á., de Saja, J. A., Bellucci, F. S., & Ardanuy, M. (2014) · Polímeros · doi:10.4322/polimeros.2014.054 · Cited by 54
Xing, Q., Li, R., Dong, X., Luo, F., Kuang, X., Wang, D., & Zhang, L. (2015) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201500002 · Cited by 54
Li, C., & Dou, Q. (2014) · Thermochimica Acta · doi:10.1016/j.tca.2014.08.036 · Cited by 54
Renewability – a principle of utmost importance!
Llevot, A., & Meier, M. A. R. (2016) · Green Chemistry · doi:10.1039/c6gc90087a · Cited by 54
Sangroniz, A., Sangroniz, L., Aranburu, N., Fernández, M., Santamaría, A., Iriarte, M., & Etxeberria, A. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.06.016 · Cited by 54
Quiles‐Carrillo, L., Muñoz, N. M., Jordá‐Vilaplana, A., Balart, R., & Torres‐Giner, S. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47396 · Cited by 54
Antibacterial Al-doped ZnO coatings on PLA films
Valerini, D., Tammaro, L., Villani, F., Rizzo, A., Caputo, I., Paolella, G., & Vigliottá, G. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-04311-z · Cited by 54
Sustainable Alternatives to Nondegradable Medical Plastics
Jiang, D., Satoh, T., Tung, S., & Kuo, C. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c00160 · Cited by 53
New titanium and zirconium initiators for the production of polylactide
Jones, M. D., Davidson, M. G., & Kociok-Köhn, G. I. (2009) · Polyhedron · doi:10.1016/j.poly.2009.10.007 · Cited by 53
Study of biodegradable polylactide/poly(butylene carbonate) blend
Wang, X., Zhuang, Y., & Dong, L. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37735 · Cited by 53
Detyothin, S., Selke, S. E. M., Narayan, R., Rubino, M. I., & Auras, R. A. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42230 · Cited by 53
Self-citationNonequilibrium Sorption of Water in Polylactide
Davis, E. M., Minelli, M., Baschetti, M. G., Sarti, G. C., & Elabd, Y. A. (2012) · Macromolecules · doi:10.1021/ma301484u · Cited by 53
Tiwary, P., & Kontopoulou, M. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03617 · Cited by 53
Jiang, J., Yang, S., Li, L., & Bai, S. (2020) · Polymers for Advanced Technologies · doi:10.1002/pat.4858 · Cited by 53
Lithium-ion battery separator membranes based on poly(L-lactic acid) biopolymer
Barbosa, J. C., Reizabal, A., Correia, D. M., Fidalgo-Marijuán, A., Gonçalves, R., Silva, M. M. P., Lanceros-Méndez, S., & Costa, C. M. (2020) · Materials Today Energy · doi:10.1016/j.mtener.2020.100494 · Cited by 53
Bioresorbable magnesium-reinforced PLA membrane for guided bone/tissue regeneration
Zhang, H. Y., Jiang, H. B., Kim, J.-E., Zhang, S.-X., Kim, K., & Kwon, J. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.104061 · Cited by 53
Amaregouda, Y., Kamanna, K., Gasti, T., & Kumbar, V. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-022-02377-6 · Cited by 53
Yüzay, I. E., Auras, R. A., & Selke, S. E. M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.31322 · Cited by 53
Self-citationTuning a robust system: N,O zinc guanidine catalysts for the ROP of lactide
Schäfer, P. M., McKeown, P., Fuchs, M., Rittinghaus, R. D., Hermann, A., Henkel, J., Seidel, S., Roitzheim, C., Ksiazkiewicz, A. N., Hoffmann, A., et al. (2019) · Dalton Transactions · doi:10.1039/c8dt04938f · Cited by 52
In Situ Versus Isolated Zinc Catalysts in the Selective Synthesis of Homo and Multi-block Polyesters
Gruszka, W., Walker, L. C., Shaver, M. P., & Garden, J. A. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c00277 · Cited by 49
“These and other aliphatic polyesters offer improved degradation rates compared to many conventional polymers and a wide range of applications including biomedical devices,(1) electronics and packaging.(2) Careful control over the polymer microstructure is key to tuning the material properties and requires the use of a…”
Background
Metadata
- Authors
- Auras, R., Harte, B., & Selke, S.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Auras, Rafael
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2004-08-24
- Volume
- 4
- Issue
- 9
- Pages
- 835-864
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2054432898
- Cited by
- 3,454
- References
- 240
- Citations by year
- 2026: 160 · 2025: 172 · 2024: 191 · 2023: 196 · 2022: 237 · 2021: 258 · 2020: 202 · 2019: 204 · 2018: 191 · 2017: 227 · 2016: 198 · 2015: 212 · 2014: 183 · 2013: 185 · 2012: 149
- FWCI
- 2.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- polylactic acid, biodegradable packaging, PLA films, mechanical properties, glass transition temperature, water sorption, solubility parameter, gas permeability, barrier properties, food contact safety, bio-based polymers
- MeSH terms
- Biocompatible Materials, Biotechnology, Diffusion, Glass, Hot Temperature, Models, Chemical, Polyesters, Polymers, Solubility, Spectrophotometry, Temperature, Thermodynamics, Time Factors, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.