Synthesis of high‐molecular‐weight poly(L‐lactide) initiated with tin 2‐ethylhexanoate
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
The bulk polymerization of L,L‐dilactide was studied as a function of polymerization temperature (Tp), time and concentration of catalyst (tin 2‐ethylhexanoate). Poly(L‐lactide) (PLLA), with the highest value of intrinsic viscosity ([η] = 13 dl · g−1; M̄v ≈ 1 · 10 6) and heat of fusion (Δ Hm = 64,7 J · g−1), was synthesized at a low catalyst concentration (0,015 wt.‐%) and at the lowest Tp studied (100°C), just above the melting point of L,L‐dilactide (98°C). The ceiling temperature of PLLA was found to be 275°C, as deduced from an M̄v max. − Tp curve. The M̄w/M̄n ratios of as‐polymerized PLLA samples ranged from 2 to 3. Fractions of PLLA with M̄v max. were already present at 50% conversion. The experimental results support a proposed nonionic insertion polymerization mechanism. Polymerization at 100–140°C resulted in early crystallization of PLLA leading to a rather untangled polymer and microporous (pores up to 100 nm) sample texture.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“During the polymerization of L-lactide, PLA with the highest value of intrinsic viscosity (Mv = 106) was synthesized when catalyst concentration was low (0.015 wt %) and at the temperature of 100 °C.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [39]
Citations
Cites
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Polylactic Acid for Surgical Implants
KULKARNI, R. K. (1966) · Archives of Surgery · doi:10.1001/archsurg.1966.01330050143023 · Cited by 841
Biodegradable poly(lactic acid) polymers
Kulkarni, R. K., Moore, E. G., Hegyeli, A. F., & Leonard, F. (1971) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820050305 · Cited by 799
Biodegradable materials of poly(l-lactic acid): 1. Melt-spun and solution-spun fibres
Eling, B., Gogolewski, S., & Pennings, A. J. (1982) · Polymer · doi:10.1016/0032-3861(82)90176-8 · Cited by 607
Self-citationRing-Opening Polymerization: Kinetics, Mechanisms, and Synthesis
(1985) · ACS Symposium Series · doi:10.1021/bk-1985-0286 · Cited by 513
Polylactide. II. Viscosity–molecular weight relationships and unperturbed chain dimensions
Schindler, A., & Harper, D. (1979) · Journal of Polymer Science: Polymer Chemistry Edition · doi:10.1002/pol.1979.170170831 · Cited by 278
Peppas, N. A. (1984) · Journal of Controlled Release · doi:10.1016/0168-3659(84)90034-8 · Cited by 255
Thermodynamics of polymerization.
Sawada, H. (1990) · Kobunshi · doi:10.1295/kobunshi.39.378 · Cited by 212
Biodegradable Polymers for Sustained Drug Delivery
Schindler, A., Jeffcoat, R., Kimmel, G. L., Pitt, C. G., Wall, M. E., & Zweidinger, R. (1977) · Contemporary Topics in Polymer Science · doi:10.1007/978-1-4615-6737-0_12 · Cited by 189
Polylactones: 6. Influence of various metal salts on the optical purity of poly(L-lactide)
Kricheldorf, H., & Serra, A. (1985) · Polymer Bulletin · doi:10.1007/bf00271606 · Cited by 189
Research works printed but not linked: 6
- 1967, Chem. Abstr., 66, 56510w
- Wehrenberg R. H., 1981, Mater. Eng., 3, 61
- D. C.Tunc M. W.Rohovsky W. B.Lehman A.Strongwater F.Kummer Proceedings 31st. Annual Meeting Orthop. Res. Society Las Vegas Nevada USA 1985 p. 165
- J. W.Leenslag A. J.Pennings R. R. M.Bos F. R.Rozema G.Boering Biomaterials in press
- F. E.Kohn Thesis University of Twente The Netherlands ch. 4 (1984)
- Lundberg R. D., 1969, Ring‐Opening Polymerization, 247
Cited by
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
Synthesis of Poly(Lactic Acid): A Review
Mehta, R., Kumar, V., Bhunia, H., & Upadhyay, S. N. (2005) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321790500304148 · Cited by 510
Kowalski, A., Duda, A., & Penczek, S. (2000) · Macromolecules · doi:10.1021/ma000125o · Cited by 482
Polymerization of l,l-Lactide Initiated by Aluminum Isopropoxide Trimer or Tetramer
Kowalski, A., Duda, A., & Penczek, S. (1998) · Macromolecules · doi:10.1021/ma971737k · Cited by 470
Fukushima, K., & Kimura, Y. (2006) · Polymer International · doi:10.1002/pi.2010 · Cited by 432
Kowalski, A., Duda, A., & Penczek, S. (2000) · Macromolecules · doi:10.1021/ma9906940 · Cited by 407
Controlled Ring-Opening Polymerization: Polymers with designed Macromolecular Architecture
Stridsberg, K. M., Ryner, M., & Albertsson, A.-C. (2002) · Advances in Polymer Science · doi:10.1007/3-540-45734-8_2 · Cited by 375
Present and Future of PLA Polymers
Vert, M., Schwarch, G., & Coudane, J. (1995) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329508010289 · Cited by 365
Resorbable materials of poly(l-lactide)
Leenslag, J. W., Pennings, A. J., Bos, R. R. M., Rozema, F. R., & Boering, G. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90121-9 · Cited by 329
Self-citationBiodegradable fibres of poly(l-lactic acid) produced by melt spinning
Fambri, L., Pegoretti, A., Fenner, R., Incardona, S. D., & Migliaresi, C. (1997) · Polymer · doi:10.1016/s0032-3861(96)00486-7 · Cited by 274
Polymerization of l,l-Dilactide Initiated by Tin(II) Butoxide
Kowalski, A., Libiszowski, J., Duda, A., & Penczek, S. (2000) · Macromolecules · doi:10.1021/ma991751s · Cited by 272
Witzke, D. R., Narayan, R., & Kolstad, J. J. (1997) · Macromolecules · doi:10.1021/ma970631m · Cited by 263
Composites of Wood and Biodegradable Thermoplastics: A Review
Chan, C. M., Vandi, L.-J., Pratt, S., Halley, P., Richardson, D., Werker, A., & Laycock, B. (2018) · Polymer Reviews · doi:10.1080/15583724.2017.1380039 · Cited by 207
“polymerization of cyclic lactide was developed for the production of high molecular weight PLA.(53) Most commercial PLAs are manufactured via ring-opening polymerization using a POLYMER REVIEWS 447”
MethodInfluentialMultifunctional initiation of lactide polymerization by stannous octoate/pentaerythritol
Kim, S. H., Han, Y., Kim, Y. H., & Hong, S. I. (1992) · Die Makromolekulare Chemie · doi:10.1002/macp.1992.021930706 · Cited by 196
(Co)polymers of L‐lactide, 2. Mechanical properties
Grijpma, D. W., & Pennings, A. J. (1994) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1994.021950516 · Cited by 191
Self-citationBiocompatibility of Resorbable Polymers: A Historical Perspective and Framework for the Future
Pappalardo, D., Mathisen, T., & Finne-Wistrand, A. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00159 · Cited by 177
Effect of tin on poly(l-lactic acid) pyrolysis
Nishida, H., Mori, T., Hoshihara, S., Fan, Y., Shirai, Y., & Endo, T. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00152-6 · Cited by 176
Polymerization temperature effects on the properties of l-lactide and ?-caprolactone copolymers
Grijpma, D. W., & Pennings, A. J. (1991) · Polymer Bulletin · doi:10.1007/bf00316903 · Cited by 165
Thermal degradation of poly-l-lactide—studies on kinetics, modelling and melt stabilisation
Wachsen, O., Platkowski, K., & Reichert, K.-H. (1997) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(96)00226-1 · Cited by 158
Migliaresi, C., Cohn, D., De Lollis, A., & Fambri, L. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070430109 · Cited by 158
Polylactones, 19. Anionic polymerization of L‐lactide in solution
Kricheldorf, H. R., & Kreiser‐Saunders, I. (1990) · Die Makromolekulare Chemie · doi:10.1002/macp.1990.021910508 · Cited by 149
Matsumoto, J., Nakada, Y., Sakurai, K., Nakamura, T., & Takahashi, Y. (1999) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(99)00153-2 · Cited by 137
Use of Monocarboxylic Iron Derivatives in the Ring-Opening Polymerization of l-Lactide
Stolt, M., & Södergård, A. (1999) · Macromolecules · doi:10.1021/ma9902753 · Cited by 119
Sustainable Poly(lactide-b-butadiene) Multiblock Copolymers with Enhanced Mechanical Properties
Lee, I., Panthani, T. R., & Bates, F. S. (2013) · Macromolecules · doi:10.1021/ma401508b · Cited by 117
Jedliński, Z., Wałach, W., Kurcok, P., & Adamus, G. (1991) · Die Makromolekulare Chemie · doi:10.1002/macp.1991.021920914 · Cited by 116
Green Copolymers Based on Poly(Lactic Acid)—Short Review
Stefaniak, K., & Masek, A. (2021) · Materials · doi:10.3390/ma14185254 · Cited by 109
Degée, P., Dubois, P., Jacobsen, S., Fritz, H. ‐., & Jérôme, R. (1999) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(19990715)37:14<2413::aid-pola15>3.0.co;2-# · Cited by 92
Effects of chain end structures on pyrolysis of poly(-lactic acid) containing tin atoms
MORI, T. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.11.008 · Cited by 76
“PLLA is generally prepared by the ring-opening polymerization of L,L-lactide [8-11], and the thermal degradation of PLLA results in the recovery of L,L-lactide [12,13].”
BackgroundStjerndahl, A., Finne‐Wistrand, A., Albertsson, A. ‐., Bäckesjö, C. M., & Lindgren, U. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31733 · Cited by 67
Schäfer, P. M., & Herres‐Pawlis, S. (2020) · ChemPlusChem · doi:10.1002/cplu.202000252 · Cited by 64
Nalampang, K., Molloy, R., & Punyodom, W. (2007) · Polymers for Advanced Technologies · doi:10.1002/pat.880 · Cited by 59
The effects of different steam‐sterilization programs on material properties of poly(L‐lactide)
Rozema, F. R., Bos, R. R. M., Boering, G., van Asten, J. A. A. M., Nijenhuis, A. J., & Pennings, A. J. (1991) · Journal of Applied Biomaterials · doi:10.1002/jab.770020104 · Cited by 57
Self-citationTuning a robust system: N,O zinc guanidine catalysts for the ROP of lactide
Schäfer, P. M., McKeown, P., Fuchs, M., Rittinghaus, R. D., Hermann, A., Henkel, J., Seidel, S., Roitzheim, C., Ksiazkiewicz, A. N., Hoffmann, A., et al. (2019) · Dalton Transactions · doi:10.1039/c8dt04938f · Cited by 52
Controlled release systems based on poly(lactic acid). An in vitro and in vivo study
Andreopoulos, A. G., Hatzi, E. C., & Doxastakis, M. (2000) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1008990109419 · Cited by 41
Gorrasi, G., Vertuccio, L., Annunziata, L., Pellecchia, C., & Pappalardo, D. (2010) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2009.11.006 · Cited by 15
Progress in Catalytic Ring-Opening Polymerization of Biobased Lactones
Al-Shok, L., Haddleton, D. M., & Adams, F. (2022) · Advances in Polymer Science · doi:10.1007/12_2021_111 · Cited by 10
Kirchhecker, S., Nguyen, N., Reichert, S., Lützow, K., Eselem Bungu, P. S., Jacobi von Wangelin, A., Sandl, S., & Neffe, A. T. (2023) · RSC Advances · doi:10.1039/d3ra03112h · Cited by 6
Metadata
- Authors
- Leenslag, J. W., & Pennings, A. J.
- Affiliations
- University of Groningen (NL)
- Corresponding author
- Pennings, Albert J.
- Venue
- Die Makromolekulare Chemie
- Publisher
- Wiley
- Published
- 1987-08
- Volume
- 188
- Issue
- 8
- Pages
- 1809-1814
- ISSN
- 0025-116X (ISSN-L)
- OpenAlex
- W1523485552
- Semantic Scholar
- ed151a9a8474580ac61670fc8dde15d255053779
- Cited by
- 290
- References
- 24
- Citations by year
- 2026: 3 · 2025: 2 · 2024: 1 · 2023: 8 · 2022: 12 · 2021: 4 · 2020: 10 · 2019: 8 · 2018: 3 · 2017: 10 · 2016: 2 · 2015: 5 · 2014: 6 · 2013: 6 · 2012: 10
- FWCI
- 5.44
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Die Makromolekulare Chemie (publishedVersion)
- University of Groningen research database (University of Groningen / Centre for Information Technology) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Carbon dioxide utilization in catalysis
- Keywords
- poly(L-lactic acid), bulk polymerization, high molecular weight polymers, polymerization temperature, ceiling temperature, intrinsic viscosity, molecular weight distribution, crystallization, catalyst concentration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.