The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Preparation of Monodisperse Biodegradable Polymer Microparticles Using a Microfluidic Flow‐Focusing Device for Controlled Drug Delivery
Open accessAbstract
Degradable microparticles have broad utility as vehicles for drug delivery and form the basis of several therapies approved by the US Food and Drug Administration. Conventional emulsion‐based methods of manufacturing produce particles with a wide range of diameters (and thus kinetics of release) in each batch. This paper describes the fabrication of monodisperse, drug‐loaded microparticles from biodegradable polymers using the microfluidic flow‐focusing (FF) devices and the drug‐delivery properties of those particles. Particles are engineered with defined sizes, ranging from 10 µm to 50 µm. These particles are nearly monodisperse (polydispersity index = 3.9%). A model amphiphilic drug (bupivacaine) is incorporated within the biodegradable matrix of the particles. Kinetic analysis shows that the release of the drug from these monodisperse particles is slower than that from conventional methods of the same average size but a broader distribution of sizes and, most importantly, exhibit a significantly lower initial burst than that observed with conventional particles. The difference in the initial kinetics of drug release is attributed to the uniform distribution of the drug inside the particles generated using the microfluidic methods. These results demonstrate the utility of microfluidic FF for the generation of homogenous systems of particles for the delivery of drugs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Xia, Y., & Whitesides, G. M. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.153 · Cited by 4,611
Self-citationFabrication of microfluidic systems in poly(dimethylsiloxane)
McDonald, J. C., Duffy, D. C., Anderson, J. R., Chiu, D. T., Wu, H., Schueller, O. J. A., & Whitesides, G. M. (2000) · Electrophoresis · doi:10.1002/(sici)1522-2683(20000101)21:1<27::aid-elps27>3.0.co;2-c · Cited by 3,329
Self-citationPolymeric systems for controlled drug release
Uhrich, K. E., Cannizzaro, S. M., Langer, R. S., & Shakesheff, K. M. (1999) · Chemical Reviews · doi:10.1021/cr940351u · Cited by 2,633
Self-citationFormation of droplets and bubbles in a microfluidic T-junction—scaling and mechanism of break-up
Garstecki, P., Fuerstman, M. J., Stone, H. A., & Whitesides, G. M. (2006) · Lab on a Chip · doi:10.1039/b510841a · Cited by 2,339
Self-citationFormation of dispersions using “flow focusing” in microchannels
Anna, S. L., Bontoux, N., & Stone, H. A. (2003) · Applied Physics Letters · doi:10.1063/1.1537519 · Cited by 2,302
Monodisperse Double Emulsions Generated from a Microcapillary Device
Utada, A. S., Lorenceau, E., Link, D. R., Kaplan, P. D., Stone, H. A., & Weitz, D. A. (2005) · Science · doi:10.1126/science.1109164 · Cited by 2,248
Dynamic Pattern Formation in a Vesicle-Generating Microfluidic Device
Thorsen, T., Roberts, R. W., Arnold, F. H., & Quake, S. R. (2001) · Physical Review Letters · doi:10.1103/physrevlett.86.4163 · Cited by 2,051
Langer, R. (1990) · Science · doi:10.1126/science.2218494 · Cited by 1,778
Self-citationContinuous-flow lithography for high-throughput microparticle synthesis
Dendukuri, D., Pregibon, D. C., Collins, J., Hatton, T. A., & Doyle, P. S. (2006) · Nature Materials · doi:10.1038/nmat1617 · Cited by 1,040
Microfluidic Platform for Controlled Synthesis of Polymeric Nanoparticles
Karnik, R., Gu, F., Basto, P., Cannizzaro, C., Dean, L., Kyei-Manu, W., Langer, R., & Farokhzad, O. C. (2008) · Nano Letters · doi:10.1021/nl801736q · Cited by 887
Self-citation
Cited by
Emerging Droplet Microfluidics
Shang, L., Cheng, Y., & Zhao, Y. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00848 · Cited by 1,584
Hydrogel microparticles for biomedical applications
Daly, A. C., Riley, L., Segura, T., & Burdick, J. A. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0148-6 · Cited by 1,249
Microdroplets in Microfluidics: An Evolving Platform for Discoveries in Chemistry and Biology
Theberge, A. B., Courtois, F., Schaerli, Y., Fischlechner, M., Abell, C., Hollfelder, F., & Huck, W. T. S. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200906653 · Cited by 1,059
Seemann, R., Brinkmann, M., Pfohl, T., & Herminghaus, S. (2012) · Reports on Progress in Physics · doi:10.1088/0034-4885/75/1/016601 · Cited by 1,049
Advanced materials and processing for drug delivery: The past and the future
Zhang, Y., Chan, H. F., & Leong, K. W. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.10.003 · Cited by 1,000
Drug delivery systems and materials for wound healing applications
Saghazadeh, S., Rinoldi, C., Schot, M., Kashaf, S. S., Sharifi, F., Jalilian, E., Nuutila, K., Giatsidis, G., Mostafalu, P., Derakhshandeh, H., et al. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.04.008 · Cited by 842
Microfluidic fabrication of microparticles for biomedical applications
Li, W., Zhang, L., Ge, X., Xu, B., Zhang, W., Qu, L., Choi, C.-H., Xu, J., Zhang, A., Lee, H., et al. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00263g · Cited by 585
Engineering and Functionalization of Gelatin Biomaterials: From Cell Culture to Medical Applications
Bello, A. B., Kim, D., Kim, D., Park, H., & Lee, S.-H. (2020) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2019.0256 · Cited by 545
Biopolymer-based nanoparticles and microparticles: Fabrication, characterization, and application
Joye, I. J., & McClements, D. J. (2014) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2014.07.002 · Cited by 527
Yin, S., Wang, C., Yu, Z., Wang, J., Liu, S., & Chen, S. (2011) · Advanced Materials · doi:10.1002/adma.201100203 · Cited by 489
Kang, E., Jeong, G. S., Choi, Y. Y., Lee, K. H., Khademhosseini, A., & Lee, S.-H. (2011) · Nature Materials · doi:10.1038/nmat3108 · Cited by 465
Multiphase flow microfluidics for the production of single or multiple emulsions for drug delivery
Zhao, C.-X. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2013.05.009 · Cited by 451
Precise control of PLG microsphere size provides enhanced control of drug release rate
Berkland, C., King, M., Cox, A., Kim, K. (., & Pack, D. W. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00136-0 · Cited by 400
Zhao, C.-X., & Middelberg, A. P. J. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2010.08.038 · Cited by 397
Phenomenology of the Initial Burst Release of Drugs from PLGA Microparticles
Yoo, J., & Won, Y.-Y. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01228 · Cited by 392
Recent advances of PLGA micro/nanoparticles for the delivery of biomacromolecular therapeutics
Ding, D., & Zhu, Q. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.12.036 · Cited by 386
Zero-order drug delivery: State of the art and future prospects
Laracuente, M.-L., Yu, M. H., & McHugh, K. J. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.09.020 · Cited by 384
Han, F. Y., Thurecht, K. J., Whittaker, A. K., & Smith, M. T. (2016) · Frontiers in Pharmacology · doi:10.3389/fphar.2016.00185 · Cited by 358
Drug delivery systems for programmed and on-demand release
Davoodi, P., Lee, L. Y., Xu, Q., Sunil, V., Sun, Y., Soh, S., & Wang, C.-H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.002 · Cited by 353
Self-citationLee, B. K., Yun, Y., & Park, K. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.05.020 · Cited by 340
Valencia, P. M., Basto, P. A., Zhang, L., Rhee, M., Langer, R., Farokhzad, O. C., & Karnik, R. (2010) · ACS Nano · doi:10.1021/nn901433u · Cited by 335
Self-citationPattanayak, P., Singh, S. K., Gulati, M., Vishwas, S., Kapoor, B., Chellappan, D. K., Anand, K., Gupta, G., Jha, N. K., Gupta, P. K., et al. (2021) · Microfluidics and Nanofluidics · doi:10.1007/s10404-021-02502-2 · Cited by 330
Customizing poly(lactic-co-glycolic acid) particles for biomedical applications
Swider, E., Koshkina, O., Tel, J., Cruz, L. J., de Vries, I. J. M., & Srinivas, M. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.04.006 · Cited by 328
Ramazani, F., Chen, W., van Nostrum, C. F., Storm, G., Kiessling, F., Lammers, T., Hennink, W. E., & Kok, R. J. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.01.020 · Cited by 288
Injectable Microfluidic Hydrogel Microspheres for Cell and Drug Delivery
Zhao, Z., Wang, Z., Li, G., Cai, Z., Wu, J., Wang, L., Deng, L., Cai, M., & Cui, W. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202103339 · Cited by 277
Biodegradable metallic bone implants
Shuai, C., Li, S., Peng, S., Feng, P., Lai, Y., & Gao, C. (2019) · Materials Chemistry Frontiers · doi:10.1039/c8qm00507a · Cited by 275
Shaping nano-/micro-particles for enhanced vascular interaction in laminar flows
Lee, S.-Y., Ferrari, M., & Decuzzi, P. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/49/495101 · Cited by 257
Functional Polymeric Microparticles Engineered from Controllable Microfluidic Emulsions
Wang, W., Zhang, M.-J., & Chu, L.-Y. (2014) · Accounts of Chemical Research · doi:10.1021/ar4001263 · Cited by 255
Microfluidic-assisted fabrication of carriers for controlled drug delivery
Liu, D., Zhang, H., Fontana, F., Hirvonen, J. T., & Santos, H. A. (2017) · Lab on a Chip · doi:10.1039/c7lc00242d · Cited by 254
Development and future of droplet microfluidics
Nan, L., Zhang, H., Weitz, D. A., & Shum, H. C. (2024) · Lab on a Chip · doi:10.1039/d3lc00729d · Cited by 253
Hung, L.-H., Teh, S.-Y., Jester, J., & Lee, A. P. (2010) · Lab on a Chip · doi:10.1039/c002866e · Cited by 171
Metadata
- Authors
- Xu, Q., Hashimoto, M., Dang, T. T., Hoare, T., Kohane, D. S., Whitesides, G. M., Langer, R., & Anderson, D. G.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2009-06-30
- Volume
- 5
- Issue
- 13
- Pages
- 1575-1581
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W2033663157
- Cited by
- 602
- References
- 39
- FWCI
- 15.92
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.