The DOI matches its Crossref record; 117 of the 117 references it cites were found in a registry or an index.
Current advances and future perspectives of additive manufacturing for functional polymeric materials and devices
Open accessAbstract
Three‐dimensional (3D) printing has received extensive attention due to its unique multidimensional functionality and customizability and has been recognized as one of the most revolutionary manufacturing technologies. Functional 3D printed products represent an important orientation for next‐generation manufacturing and attract a great spotlight for the application in sensors, actuators, robots, electronics, and medical devices. However, the lack of functions of printing polymeric materials dramatically limits the development of functional 3D printing. Different from traditional processing, the physical properties, such as geometry and rheological behavior, of the polymeric materials must match the printing process, making the selection of printable materials limited. More importantly, challenges in large‐scale production of such materials further stifle the development of functional 3D printing industry. In this review, we aim to outline recent advances in polymeric materials and methodologies for the functional 3D printing technology. The reports are classified based on functionalities, including electronic conductive, thermally conductive, electromagnetic interference shielding, energy storage, and energy harvesting materials. This study attempts to provide a comprehensive overview of the challenges and opportunities for 3D printing functional polymeric materials/devices, also seeks to enlighten the orientation of future research in this field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Internet of Things: A Survey on Enabling Technologies, Protocols, and Applications
Al-Fuqaha, A., Guizani, M., Mohammadi, M., Aledhari, M., & Ayyash, M. (2015) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2015.2444095 · Cited by 8,630
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
On Maxwell's displacement current for energy and sensors: the origin of nanogenerators
Wang, Z. L. (2017) · Materials Today · doi:10.1016/j.mattod.2016.12.001 · Cited by 2,083
Flexible Nanogenerators for Energy Harvesting and Self‐Powered Electronics
Fan, F. R., Tang, W., & Wang, Z. L. (2016) · Advanced Materials · doi:10.1002/adma.201504299 · Cited by 1,918
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Toward the blue energy dream by triboelectric nanogenerator networks
Wang, Z. L., Jiang, T., & Xu, L. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.06.035 · Cited by 1,249
Pu, X., Liu, M., Chen, X., Sun, J., Du, C., Zhang, Y., Zhai, J., Hu, W., & Wang, Z. L. (2017) · Science Advances · doi:10.1126/sciadv.1700015 · Cited by 1,218
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
Shen, B., Zhai, W., & Zheng, W. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400079 · Cited by 922
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Piezoelectric BaTiO3Thin Film Nanogenerator on Plastic Substrates
Park, K.-I., Xu, S., Liu, Y., Hwang, G.-T., Kang, S.-J. L., Wang, Z. L., & Lee, K. J. (2010) · Nano Letters · doi:10.1021/nl102959k · Cited by 827
Au, A. K., Huynh, W., Horowitz, L. F., & Folch, A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201504382 · Cited by 788
Recent Progress in Materials and Devices toward Printable and Flexible Sensors
Rim, Y. S., Bae, S., Chen, H., De Marco, N., & Yang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505118 · Cited by 771
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Overview of carbon nanostructures and nanocomposites for electromagnetic wave shielding
Wang, C., Murugadoss, V., Kong, J., He, Z., Mai, X., Shao, Q., Chen, Y., Guo, L., Liu, C., Angaiah, S., et al. (2018) · Carbon · doi:10.1016/j.carbon.2018.09.006 · Cited by 751
Additive manufacturing of biomaterials
Bose, S., Ke, D., Sahasrabudhe, H., & Bandyopadhyay, A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.08.003 · Cited by 738
Hybrid 3D Printing of Soft Electronics
Valentine, A. D., Busbee, T. A., Boley, J. W., Raney, J. R., Chortos, A., Kotikian, A., Berrigan, J. D., Durstock, M. F., & Lewis, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201703817 · Cited by 688
Electroactive poly(vinylidene fluoride)-based structures for advanced applications
Ribeiro, C., Costa, C. M., Correia, D. M., Nunes-Pereira, J., Oliveira, J., Martins, P., Gonçalves, R., Cardoso, V. F., & Lanceros-Méndez, S. (2018) · Nature Protocols · doi:10.1038/nprot.2017.157 · Cited by 688
Gnanasekaran, K., Heijmans, T., van Bennekom, S., Woldhuis, H., Wijnia, S., de With, G., & Friedrich, H. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.04.003 · Cited by 594
Soft Somatosensitive Actuators via Embedded 3D Printing
Truby, R. L., Wehner, M., Grosskopf, A. K., Vogt, D. M., Uzel, S. G. M., Wood, R. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706383 · Cited by 586
Metal additive manufacturing in the commercial aviation industry: A review
Gisario, A., Kazarian, M., Martina, F., & Mehrpouya, M. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.08.005 · Cited by 574
Oxide materials for high temperature thermoelectric energy conversion
Fergus, J. W. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.10.007 · Cited by 555
Fast‐Response, Stiffness‐Tunable Soft Actuator by Hybrid Multimaterial 3D Printing
Zhang, Y., Zhang, N., Hingorani, H., Ding, N., Wang, D., Yuan, C., Zhang, B., Gu, G., & Ge, Q. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806698 · Cited by 513
Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading
Yao, B., Chandrasekaran, S., Zhang, J., Xiao, W., Qian, F., Zhu, C., Duoss, E. B., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2019) · Joule · doi:10.1016/j.joule.2018.09.020 · Cited by 491
Self-citationCui, H., Hensleigh, R., Yao, D., Maurya, D., Kumar, P., Kang, M. G., Priya, S., & Zheng, X. (2019) · Nature Materials · doi:10.1038/s41563-018-0268-1 · Cited by 481
Progress in 3D Printing of Carbon Materials for Energy‐Related Applications
Fu, K., Yao, Y., Dai, J., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201603486 · Cited by 475
3D Printed Graphene Based Energy Storage Devices
Foster, C. W., Down, M. P., Zhang, Y., Ji, X., Rowley-Neale, S. J., Smith, G. C., Kelly, P. J., & Banks, C. E. (2017) · Scientific Reports · doi:10.1038/srep42233 · Cited by 471
Lin, Z., Liu, Y., Raghavan, S., Moon, K.-S., Sitaraman, S. K., & Wong, C.-P. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401939z · Cited by 469
Han, M., Wang, H., Yang, Y., Liang, C., Bai, W., Yan, Z., Li, H., Xue, Y., Wang, X., Akar, B., et al. (2019) · Nature Electronics · doi:10.1038/s41928-018-0189-7 · Cited by 469
Hybrid Energy Harvesters: Toward Sustainable Energy Harvesting
Ryu, H., Yoon, H., & Kim, S. (2019) · Advanced Materials · doi:10.1002/adma.201802898 · Cited by 465
Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface
Walker, D. A., Hedrick, J. L., & Mirkin, C. A. (2019) · Science · doi:10.1126/science.aax1562 · Cited by 459
3D Printing of Customized Li‐Ion Batteries with Thick Electrodes
Wei, T., Ahn, B. Y., Grotto, J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201703027 · Cited by 434
3D Printed Quantum Dot Light-Emitting Diodes
Kong, Y. L., Tamargo, I. A., Kim, H., Johnson, B. N., Gupta, M. K., Koh, T.-W., Chin, H.-A., Steingart, D. A., Rand, B. P., & McAlpine, M. C. (2014) · Nano Letters · doi:10.1021/nl5033292 · Cited by 432
3D Printing of Transparent and Conductive Heterogeneous Hydrogel–Elastomer Systems
Tian, K., Bae, J., Bakarich, S. E., Yang, C., Gately, R. D., Spinks, G. M., in het Panhuis, M., Suo, Z., & Vlassak, J. J. (2017) · Advanced Materials · doi:10.1002/adma.201604827 · Cited by 419
Chen, Q., Mangadlao, J. D., Wallat, J., De Leon, A., Pokorski, J. K., & Advincula, R. C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11793 · Cited by 415
Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review
Tian, X., Jin, J., Yuan, S., Chua, C. K., Tor, S. B., & Zhou, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700127 · Cited by 407
Ma, X., Liu, J., Zhu, W., Tang, M., Lawrence, N., Yu, C., Gou, M., & Chen, S. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.06.011 · Cited by 401
Stable propagation of mechanical signals in soft media using stored elastic energy
Raney, J. R., Nadkarni, N., Daraio, C., Kochmann, D. M., Lewis, J. A., & Bertoldi, K. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1604838113 · Cited by 397
3D printed functional nanomaterials for electrochemical energy storage
Zhu, C., Liu, T., Qian, F., Chen, W., Chandrasekaran, S., Yao, B., Song, Y., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., et al. (2017) · Nano Today · doi:10.1016/j.nantod.2017.06.007 · Cited by 394
Self-citationA New 3D Printing Strategy by Harnessing Deformation, Instability, and Fracture of Viscoelastic Inks
Yuk, H., & Zhao, X. (2018) · Advanced Materials · doi:10.1002/adma.201704028 · Cited by 381
Pu, X., Hu, W., & Wang, Z. L. (2018) · Small · doi:10.1002/smll.201702817 · Cited by 378
Three-dimensional printing of hierarchical liquid-crystal-polymer structures
Gantenbein, S., Masania, K., Woigk, W., Sesseg, J. P. W., Tervoort, T. A., & Studart, A. R. (2018) · Nature · doi:10.1038/s41586-018-0474-7 · Cited by 377
3D printing of shape-conformable thermoelectric materials using all-inorganic Bi2Te3-based inks
Kim, F., Kwon, B., Eom, Y., Lee, J. E., Park, S., Jo, S., Park, S. H., Kim, B.-S., Im, H. J., Lee, M. H., et al. (2018) · Nature Energy · doi:10.1038/s41560-017-0071-2 · Cited by 363
Frontiers of 3D Printing/Additive Manufacturing: from Human Organs to Aircraft Fabrication
Murr, L. E. (2016) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2016.08.011 · Cited by 329
3D printed electrochemical energy storage devices
Chang, P., Mei, H., Zhou, S., Dassios, K. G., & Cheng, L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11860d · Cited by 329
Additive Manufacturing of Batteries
Pang, Y., Cao, Y., Chu, Y., Liu, M., Snyder, K., MacKenzie, D., & Cao, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906244 · Cited by 298
Electrical conductivity of CNT/polymer composites: 3D printing, measurements and modeling
Mora, A., Verma, P., & Kumar, S. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107600 · Cited by 294
One-Step Solvent Evaporation-Assisted 3D Printing of Piezoelectric PVDF Nanocomposite Structures
Bodkhe, S., Turcot, G., Gosselin, F. P., & Therriault, D. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04095 · Cited by 289
High Output Piezo/Triboelectric Hybrid Generator
Jung, W.-S., Kang, M.-G., Moon, H. G., Baek, S.-H., Yoon, S.-J., Wang, Z.-L., Kim, S.-W., & Kang, C.-Y. (2015) · Scientific Reports · doi:10.1038/srep09309 · Cited by 280
Yan, J., Liu, M., Jeong, Y. G., Kang, W., Li, L., Zhao, Y., Deng, N., Cheng, B., & Yang, G. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.12.010 · Cited by 276
Self-citationIn Situ Quantitative Study of Nanoscale Triboelectrification and Patterning
Zhou, Y. S., Liu, Y., Zhu, G., Lin, Z.-H., Pan, C., Jing, Q., & Wang, Z. L. (2013) · Nano Letters · doi:10.1021/nl401006x · Cited by 274
Recent advance in new-generation integrated devices for energy harvesting and storage
Yun, S., Zhang, Y., Xu, Q., Liu, J., & Qin, Y. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.03.074 · Cited by 263
All 3D-printed stretchable piezoelectric nanogenerator with non-protruding kirigami structure
Zhou, X., Parida, K., Halevi, O., Liu, Y., Xiong, J., Magdassi, S., & Lee, P. S. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104676 · Cited by 260
Tactile-Sensing Based on Flexible PVDF Nanofibers via Electrospinning: A Review
Wang, X., Sun, F., Yin, G., Wang, Y., Liu, B., & Dong, M. (2018) · Sensors · doi:10.3390/s18020330 · Cited by 256
Wong, M., Owen, I., Sutcliffe, C. J., & Puri, A. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.06.002 · Cited by 236
Additive Manufacturing: Applications and Directions in Photonics and Optoelectronics
Camposeo, A., Persano, L., Farsari, M., & Pisignano, D. (2019) · Advanced Optical Materials · doi:10.1002/adom.201800419 · Cited by 227
Nanogenerators: An emerging technology towards nanoenergy
Zi, Y., & Wang, Z. L. (2017) · APL Materials · doi:10.1063/1.4977208 · Cited by 222
Smith, C. F., Tollemache, N., Covill, D., & Johnston, M. (2018) · Anatomical Sciences Education · doi:10.1002/ase.1718 · Cited by 218
Sezer, H. K., & Eren, O. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.12.004 · Cited by 217
3D printing strong and conductive geo-polymer nanocomposite structures modified by graphene oxide
Zhong, J., Zhou, G.-X., He, P.-G., Yang, Z.-H., & Jia, D.-C. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.102 · Cited by 208
3D printing of a wearable personalized oral delivery device: A first-in-human study
Liang, K., Carmone, S., Brambilla, D., & Leroux, J.-C. (2018) · Science Advances · doi:10.1126/sciadv.aat2544 · Cited by 205
Liu, J., Li, W., Guo, Y., Zhang, H., & Zhang, Z. (2019) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.02.026 · Cited by 196
3D Printing of Flexible Electronic Devices
Yang, H., Leow, W. R., & Chen, X. (2018) · Small Methods · doi:10.1002/smtd.201700259 · Cited by 185
Electrically conductive nanocomposites for fused deposition modelling
Dorigato, A., Moretti, V., Dul, S., Unterberger, S. H., & Pegoretti, A. (2017) · Synthetic Metals · doi:10.1016/j.synthmet.2017.01.009 · Cited by 178
Sultana, A., Ghosh, S. K., Sencadas, V., Zheng, T., Higgins, M. J., Middya, T. R., & Mandal, D. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01439b · Cited by 178
3D Printing of Tunable Energy Storage Devices with Both High Areal and Volumetric Energy Densities
Gao, T., Zhou, Z., Yu, J., Zhao, J., Wang, G., Cao, D., Ding, B., & Li, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802578 · Cited by 177
Self-citationAthreya, S. R., Kalaitzidou, K., & Das, S. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.12.028 · Cited by 175
Zhang, Y., Liu, C., Liu, J., Xiong, J., Liu, J., Zhang, K., Liu, Y., Peng, M., Yu, A., Zhang, A., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10345 · Cited by 163
Design of mechanical metamaterials for simultaneous vibration isolation and energy harvesting
Li, Y., Baker, E., Reissman, T., Sun, C., & Liu, W. K. (2017) · Applied Physics Letters · doi:10.1063/1.5008674 · Cited by 162
Self-citationJia, Y., He, H., Geng, Y., Huang, B., & Peng, X. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.03.035 · Cited by 160
A flexible self-poled piezoelectric nanogenerator based on a rGO–Ag/PVDF nanocomposite
Pusty, M., Sinha, L., & Shirage, P. M. (2018) · New Journal of Chemistry · doi:10.1039/c8nj04751k · Cited by 148
Hohimer, C. J., Petrossian, G., Ameli, A., Mo, C., & Pötschke, P. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101281 · Cited by 147
Jing, J., Chen, Y., Shi, S., Yang, L., & Lambin, P. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126218 · Cited by 147
Yuan, X., Gao, X., Yang, J., Shen, X., Li, Z., You, S., Wang, Z., & Dong, S. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01785b · Cited by 142
Kalsoom, U., Peristyy, A. A., Nesterenko, P. N., & Paull, B. (2016) · RSC Advances · doi:10.1039/c6ra05261d · Cited by 141
3D Printing Fabrication of Amorphous Thermoelectric Materials with Ultralow Thermal Conductivity
He, M., Zhao, Y., Wang, B., et al. (2015) · Small · doi:10.1002/smll.201502153 · Cited by 126
Self-powered flexible inorganic electronic system
Lee, S. H., Jeong, C. K., Hwang, G., & Lee, K. J. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.12.003 · Cited by 126
Ryu, J., Kim, J., Oh, J., Lim, S., Sim, J. Y., Jeon, J. S., No, K., Park, S., & Hong, S. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.10.071 · Cited by 125
Monolithic Dual‐Material 3D Printing of Ionic Skins with Long‐Term Performance Stability
Yin, X., Zhang, Y., Xiao, J., Moorlag, C., & Yang, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904716 · Cited by 114
Gan, X., Wang, J., Wang, Z., Zheng, Z. Q., Lavorgna, M., Ronca, A., Fei, G., & Xia, H. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107874 · Cited by 109
Pabst, O., Perelaer, J., Beckert, E., Schubert, U. S., Eberhardt, R., & Tünnermann, A. (2013) · Organic Electronics · doi:10.1016/j.orgel.2013.09.009 · Cited by 107
Li, Z., Wang, Z., Gan, X., Fu, D., Fei, G., & Xia, H. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700211 · Cited by 104
Waheed, S., Cabot, J. M., Šmejkal, P., Farajikhah, S., Sayyar, S., Innis, P. C., Beirne, S., Barnsley, G., Lewis, T. W., Breadmore, M. C., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b18232 · Cited by 96
Mubarak, S., Dhamodharan, D., Kale, M. B., Divakaran, N. C., Senthil, T., Ponnan, S., Wu, L., & Wang, J. (2020) · Nanomaterials · doi:10.3390/nano10020217 · Cited by 95
Huang, B., Hu, R. H., Xue, Z., Zhao, J., Li, Q., Xia, T. D., Zhang, W., & Lu, C. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115736 · Cited by 92
Lu, Y., Chen, Y., Wang, M., Shi, S., & Jing, J. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c00074 · Cited by 88
Rheological and electrical behaviour of nanocarbon/poly(lactic) acid for 3D printing applications
Spinelli, G., Lamberti, P., Tucci, V., Ivanova, R., Tabakova, S., Ivanov, E., Kotsilkova, R., Cimmino, S., Maio, R. D., & Silvestre, C. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.03.021 · Cited by 83
3D printing of Fe3O4 functionalized graphene-polymer (FGP) composite microarchitectures
Wajahat, M., Kim, J. H., Ahn, J., Lee, S., Bae, J., Pyo, J., & Seol, S. K. (2020) · Carbon · doi:10.1016/j.carbon.2020.05.045 · Cited by 83
Functional nanocomposites for 3D printing of stretchable and wearable sensors
Abshirini, M., Charara, M., Marashizadeh, P., Saha, M. C., Altan, M. C., & Liu, Y. (2019) · Applied Nanoscience · doi:10.1007/s13204-019-01032-2 · Cited by 82
Wang, Z., Ren, J., Liu, R., Sun, X., Huang, D., Xu, W., Jiang, J., Ma, K., & Liu, Y. (2020) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2020.105957 · Cited by 81
Thermoelectric materials and devices fabricated by additive manufacturing
Du, Y., Chen, J., Meng, Q., Dou, Y., Xu, J., & Shen, S. (2020) · Vacuum · doi:10.1016/j.vacuum.2020.109384 · Cited by 79
Mubarak, S., Dhamodharan, D., Divakaran, N. C., Kale, M. B., Senthil, T., Wu, L., & Wang, J. (2020) · Nanomaterials · doi:10.3390/nano10010079 · Cited by 71
Zhang, T., Li, Z., Li, K., & Yang, X. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900679 · Cited by 68
Dun, C., Kuang, W., Kempf, N., Saeidi‐Javash, M., Singh, D. J., & Zhang, Y. (2019) · Advanced Science · doi:10.1002/advs.201901788 · Cited by 64
Thermoelectric and mechanical properties of PLA/Bi0·5Sb1·5Te3 composite wires used for 3D printing
Wang, J., Li, H., Liu, R., Li, L., Lin, Y., & Nan, C. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.01.013 · Cited by 61
Mao, Y. X., Yan, Y., Wu, K., Xie, H., Zekun, X., Yang, J., Zhang, Q., Uher, C., & Tang, X. (2017) · RSC Advances · doi:10.1039/c7ra02677c · Cited by 60
Recent Advances on 3D Printing Technique for Thermal‐Related Applications
Nguyen, N., Park, J. G., Zhang, S., et al. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700876 · Cited by 60
Chen, G., Chen, N., Li, L., Wang, Q., & Duan, W. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b00157 · Cited by 55
Self-citationWu, J., Chen, N., Bai, F. L., & Wang, Q. (2017) · Polymer Composites · doi:10.1002/pc.24642 · Cited by 52
Self-citationChallenges in 3D printing of piezoelectric materials
Bodkhe, S., & Ermanni, P. (2019) · Multifunctional Materials · doi:10.1088/2399-7532/ab0c41 · Cited by 52
Leng, J., Wu, J., Chen, N., Xu, X. M., & Zhang, J. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2019-0139 · Cited by 51
Chen, G., Chen, N., & Wang, Q. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.054 · Cited by 46
Self-citation3D printing technology and its impact on Chinese manufacturing
Long, Y., Pan, J., Zhang, Q., & Hao, Y. (2017) · International Journal of Production Research · doi:10.1080/00207543.2017.1280196 · Cited by 45
3D‐Printed Structural Pseudocapacitors
Liu, X., Jervis, R., Maher, R. C., Villar‐García, I. J., Marlow, M. N., Shearing, P. R., Ouyang, M., Cohen, L. F., Brandon, N. P., & Wu, B. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600167 · Cited by 42
Self-citationA high output voltage flexible piezoelectric nanogenerator using porous lead-free KNbO3 nanofibers
Ganeshkumar, R., Cheah, C. W., Xu, R., Kim, S., & Zhao, R. J. (2017) · Applied Physics Letters · doi:10.1063/1.4992786 · Cited by 42
A flexible, wave-shaped P(VDF-TrFE)/metglas piezoelectric composite for wearable applications
You, S., Shi, H., Wu, J., Shan, L., Guo, S., & Dong, S. (2016) · Journal of Applied Physics · doi:10.1063/1.4972478 · Cited by 40
Leng, J., Wu, J., & Zhang, J. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b04285 · Cited by 36
Wu, J., Chen, N., & Wang, Q. (2018) · Polymers for Advanced Technologies · doi:10.1002/pat.4256 · Cited by 29
Self-citationSelective current collecting design for spring-type energy harvesters
Kim, D.-J., Roh, H. S., Kim, Y., et al. (2015) · RSC Advances · doi:10.1039/c4ra16443a · Cited by 18
Cited by
A Review on Mechanochemistry: Approaching Advanced Energy Materials with Greener Force
Liu, X., Li, Y., Zeng, L., Li, X., Chen, N., Bai, S., He, H., Wang, Q., & Zhang, C. (2022) · Advanced Materials · doi:10.1002/adma.202108327 · Cited by 311
Self-citation
Metadata
- Authors
- Zhang, C., Li, Y., Kang, W., Liu, X., & Wang, Q.
- Venue
- SusMat
- Publisher
- Wiley
- Published
- 2021-03
- Volume
- 1
- Issue
- 1
- Pages
- 127-147
- ISSN
- 2692-4552 (ISSN-L)
- OpenAlex
- W3138792962
- Cited by
- 256
- References
- 117
- FWCI
- 14.43
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.