Ingrowth of human mesenchymal stem cells into porous silk particle reinforced silk composite scaffolds: An in vitro study
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Silk fibroin protein is biodegradable and biocompatible, exhibiting excellent mechanical properties for various biomedical applications. However, porous 3D silk fibroin scaffolds, or silk sponges, usually fall short in matching the initial mechanical requirements for bone tissue engineering. In the present study, silk sponge matrices were reinforced with silk microparticles to generate protein-protein composite scaffolds with desirable mechanical properties for in vitro osteogenic tissue formation. It was found that increasing the silk microparticle loading led to a substantial increase in the scaffold compressive modulus from 0.3 MPa (nonreinforced) to 1.9 MPa for 1:2 (matrix:particle) reinforcement loading by dry mass. Biochemical, gene expression, and histological assays were employed to study the possible effects of increasing composite scaffold stiffness, due to microparticle reinforcement, on in vitro osteogenic differentiation of human mesenchymal stem cells (hMSCs). Increasing silk microparticle loading increased the osteogenic capability of hMSCs in the presence of bone morphogenic protein-2 (BMP-2) and other osteogenic factors in static culture for up to six weeks. The calcium adsorption increased dramatically with increasing loading, as observed from biochemical assays, histological staining, and microCT (μCT) analysis. Specifically, calcium content in the scaffolds increased by 0.57, 0.71, and 1.27 mg (per μg of DNA) from 3 to 6 weeks for matrix to particle dry mass loading ratios of 1:0, 1:1 and 1:2, respectively. In addition, μCT imaging revealed that at 6 weeks, bone volume fraction increased from 0.78% for nonreinforced to 7.1% and 6.7% for 1:1 and 1:2 loading, respectively. Our results support the hypothesis that scaffold stiffness may strongly influence the 3D in vitro differentiation capabilities of hMSCs, providing a means to improve osteogenic outcomes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tissue Cells Feel and Respond to the Stiffness of Their Substrate
Discher, D. E., Janmey, P., & Wang, Y.-L. (2005) · Science · doi:10.1126/science.1116995 · Cited by 6,382 · cited 1×
“In addition, the role of matrix stiffness in cell motility and behavior has also been explored [40] and shown to influence differentiation.”
BackgroundAltman, G. H., Diaz, F., Jakuba, C., Calabro, T., Horan, R. L., Chen, J., Lu, H., Richmond, J., & Kaplan, D. L. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00353-8 · Cited by 3,458
Self-citationWei, G., & Ma, P. X. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.12.005 · Cited by 1,271
Biomechanics of cellular solids
Gibson, L. J. (2005) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.09.027 · Cited by 961 · cited 1×
“Published modeling studies [29,37] indicate that such local architectural modifications may lead to a global increase in scaffold modulus as compared with the stiffness of a classical foam.”
BackgroundLiu, X. S., Sajda, P., Saha, P. K., Wehrli, F. W., & Guo, X. E. (2006) · Journal of Bone and Mineral Research · doi:10.1359/jbmr.060716 · Cited by 207 · cited 3×
“2.7 MicroCT μCT was performed using a protocol described in detail in Liu et al [35].”
MethodInfluential
Cited by
Materials fabrication from Bombyx mori silk fibroin
Rockwood, D. N., Preda, R. C., Yücel, T., Wang, X., Lovett, M. L., & Kaplan, D. L. (2011) · Nature Protocols · doi:10.1038/nprot.2011.379 · Cited by 3,066
Self-citationSilk fibroin biomaterials for tissue regenerations
Kundu, B., Rajkhowa, R., Kundu, S. C., & Wang, X. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.043 · Cited by 1,391
Self-citation3D Cell Culture Systems: Advantages and Applications
Ravi, M., Paramesh, V., Kaviya, S. R., Anuradha, E., & Solomon, F. D. P. (2015) · Journal of Cellular Physiology · doi:10.1002/jcp.24683 · Cited by 1,206
Natural‐Based Nanocomposites for Bone Tissue Engineering and Regenerative Medicine: A Review
Pina, S., Oliveira, J. M., & Reis, R. L. (2015) · Advanced Materials · doi:10.1002/adma.201403354 · Cited by 948
Scaffold Design for Bone Regeneration
Polo-Corrales, L., Latorre-Esteves, M., & Ramirez-Vick, J. E. (2014) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2014.9127 · Cited by 945
Silk fibroin as biomaterial for bone tissue engineering
Melke, J., Midha, S., Ghosh, S., Ito, K., & Hofmann, S. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.09.005 · Cited by 789
Silk proteins for biomedical applications: Bioengineering perspectives
Kundu, B., Kurland, N. E., Bano, S., Patra, C., Engel, F. B., Yadavalli, V. K., & Kundu, S. C. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.09.002 · Cited by 451
High-strength silk protein scaffolds for bone repair
Mandal, B. B., Grinberg, A., Seok Gil, E., Panilaitis, B., & Kaplan, D. L. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1119474109 · Cited by 401
“However, toward, this goal several biological parameters need to be met including biocompatibility, biodegradability, surface roughness, porosity, osteoconductivity, and above all high mechanical integrity (4, 14, 15).”
BackgroundResultInfluentialSelf-citationNatural Polymeric Scaffolds in Bone Regeneration
Filippi, M., Born, G., Chaaban, M., & Scherberich, A. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00474 · Cited by 376
Silk scaffolds in bone tissue engineering: An overview
Bhattacharjee, P., Kundu, B., Naskar, D., Kim, H.-W., Maiti, T. K., Bhattacharya, D., & Kundu, S. C. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.09.027 · Cited by 318
The use of composite materials in modern orthopaedic medicine and prosthetic devices: A review
Scholz, M.-S., Blanchfield, J. P., Bloom, L. D., Coburn, B. H., Elkington, M., Fuller, J. D., Gilbert, M. E., Muflahi, S. A., Pernice, M. F., Rae, S. I., et al. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.08.017 · Cited by 311
Nucleation and growth of mineralized bone matrix on silk-hydroxyapatite composite scaffolds
Bhumiratana, S., Grayson, W. L., Castaneda, A., Rockwood, D. N., Gil, E. S., Kaplan, D. L., & Vunjak-Novakovic, G. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.12.058 · Cited by 265
“However, initial scaffold stiffness was not significantly alteredamong thegroups andother formsofmodifying silk scaffolds have provided considerably higher initial compressive moduli but did not elicit such significant cell-mediated improvements [9].”
Correia, C., Bhumiratana, S., Yan, L.-P., Oliveira, A. L., Gimble, J. M., Rockwood, D., Kaplan, D. L., Sousa, R. A., Reis, R. L., & Vunjak-Novakovic, G. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.03.019 · Cited by 236
“Tissue engineers have explored silk scaffolds for bone regeneration by using bone marrow mesenchymal stem cells (BM-MSC) as the preferred cell source with superior outcomes validated with both aqueous-based [19,26,27] and HFIP-derived scaffolds [6,21, 28].”
Self-citationMirahmadi, F., Tafazzoli-Shadpour, M., Shokrgozar, M. A., & Bonakdar, S. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.07.043 · Cited by 232
Vyas, C., Zhang, J., Øvrebø, Ø., Huang, B., Roberts, I., Setty, M., Allardyce, B., Haugen, H., Rajkhowa, R., & Bartolo, P. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.111433 · Cited by 111
Self-citationA comprehensive review on silk fibroin as a persuasive biomaterial for bone tissue engineering
Li, M., You, J., Qin, Q., Liu, M., Yang, Y., Jia, K., Zhang, Y., & Zhou, Y. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24032660 · Cited by 64
Metadata
- Authors
- Rockwood, D. N., Gil, E. S., Park, S.-H., Kluge, J. A., Grayson, W., Bhumiratana, S., Rajkhowa, R., Wang, X., Kim, S. J., Vunjak-Novakovic, G., & Kaplan, D. L.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2011-01
- Volume
- 7
- Issue
- 1
- Pages
- 144-151
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W1995669634
- Cited by
- 119
- References
- 5
- FWCI
- 4.15
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.