The DOI matches its Crossref record; 122 of the 122 references it cites were found in a registry or an index.
Additively manufactured biodegradable porous iron
Open accessAbstract
Additively manufactured (AM) topologically ordered porous metallic biomaterials with the proper biodegradation profile offer a unique combination of properties ideal for bone regeneration. These include a fully interconnected porous structure, bone-mimicking mechanical properties, and the possibility of fully regenerating bony defects. Most of such biomaterials are, however, based on magnesium and, thus, degrade too fast. Here, we present the first report on topologically ordered porous iron made by Direct Metal Printing (DMP). The topological design was based on a repetitive diamond unit cell. We conducted a comprehensive study on the in vitro biodegradation behavior (up to 28 days), electrochemical performance, time-dependent mechanical properties, and biocompatibility of the scaffolds. The mechanical properties of AM porous iron (E = 1600-1800 MPa) were still within the range of the values reported for trabecular bone after 28 days of biodegradation. Electrochemical tests showed up to ≈12 times higher rates of biodegradation for AM porous iron as compared to that of cold-rolled (CR) iron, while only 3.1% of weight loss was measured after 4 weeks of immersion tests. The biodegradation mechanisms were found to be topology-dependent and different between the periphery and central parts of the scaffolds. While direct contact between MG-63 cells and scaffolds revealed substantial and almost instant cytotoxicity in static cell culture, as compared to Ti-6Al-4V, the cytocompatibility according to ISO 10993 was reasonable in in vitro assays for up to 72 h. This study shows how DMP could be used to increase the surface area and decrease the grain sizes of topologically ordered porous metallic biomaterials made from metals that are usually considered to degrade too slowly (e.g., iron), opening up many new opportunities for the development of biodegradable metallic biomaterials. STATEMENT OF SIGNIFICANCE Biodegradation in general and proper biodegradation profile in particular are perhaps the most important requirements that additively manufactured (AM) topologically ordered porous metallic biomaterials should offer in order to become the ideal biomaterial for bone regeneration. Currently, most biodegradable metallic biomaterials are based on magnesium, which degrade fast with gas generation. Here, we present the first report on topologically ordered porous iron made by Direct Metal Printing (DMP). We also conducted a comprehensive study on the biodegradation behavior, electrochemical performance, biocompatibility, and the time evolution of the mechanical properties of the implants. We show that these implants possess bone-mimicking mechanical properties, accelerated degradation rate, and reasonable cytocompatibility, opening up many new opportunities for the development of iron-based biodegradable materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Fu, S.-Y., Feng, X.-Q., Lauke, B., & Mai, Y.-W. (2008) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2008.01.002 · Cited by 3,549
Classification of cell death: recommendations of the Nomenclature Committee on Cell Death 2009
Kroemer, G., Galluzzi, L., Vandenabeele, P., Abrams, J., Alnemri, E. S., Baehrecke, E. H., Blagosklonny, M. V., El-Deiry, W. S., Golstein, P., Green, D. R., et al. (2009) · Cell Death & Differentiation · doi:10.1038/cdd.2008.150 · Cited by 3,399
The biochemical basis of zinc physiology
Vallee, B. L., & Falchuk, K. H. (1993) · Physiological Reviews · doi:10.1152/physrev.1993.73.1.79 · Cited by 2,990
Zheng, Y. F., Gu, X. N., & Witte, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.01.001 · Cited by 2,436
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
The neurobiology of zinc in health and disease
Frederickson, C. J., Koh, J.-Y., & Bush, A. I. (2005) · Nature Reviews Neuroscience · doi:10.1038/nrn1671 · Cited by 1,850
Degradable biomaterials based on magnesium corrosion
Witte, F., Hort, N., Vogt, C., Cohen, S., Kainer, K. U., Willumeit, R., & Feyerabend, F. (2008) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2009.04.001 · Cited by 1,820
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
In vitro corrosion and biocompatibility of binary magnesium alloys
Gu, X., Zheng, Y., Cheng, Y., Zhong, S., & Xi, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.10.021 · Cited by 1,343
General relationship between strength and hardness
Zhang, P., Li, S. X., & Zhang, Z. F. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.08.061 · Cited by 1,248
Biomimetic porous scaffolds for bone tissue engineering
Wu, S., Liu, X., Yeung, K. W. K., Liu, C., & Yang, X. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.04.001 · Cited by 1,159
Preparation and assessment of revised simulated body fluids
Oyane, A., Kim, H., Furuya, T., Kokubo, T., Miyazaki, T., & Nakamura, T. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10482 · Cited by 1,117
Zhao, D., Witte, F., Lu, F., Wang, J., Li, J., & Qin, L. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.017 · Cited by 945
Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents
Bowen, P. K., Drelich, J., & Goldman, J. (2013) · Advanced Materials · doi:10.1002/adma.201300226 · Cited by 928
Bobbert, F. S. L., Lietaert, K., Eftekhari, A. A., Pouran, B., Ahmadi, S. M., Weinans, H., & Zadpoor, A. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.024 · Cited by 873
Self-citationKirkland, N. T., Birbilis, N., & Staiger, M. P. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.11.014 · Cited by 856
Classification of cell death: recommendations of the Nomenclature Committee on Cell Death
Kroemer, G., El-Deiry, W. S., Golstein, P., Peter, M. E., Vaux, D., Vandenabeele, P., Zhivotovsky, B., Blagosklonny, M. V., Malorni, W., Knight, R. A., et al. (2005) · Cell Death & Differentiation · doi:10.1038/sj.cdd.4401724 · Cited by 843
Zinc in Infection and Inflammation
Gammoh, N., & Rink, L. (2017) · Nutrients · doi:10.3390/nu9060624 · Cited by 818
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Parthasarathy, J., Starly, B., Raman, S., & Christensen, A. (2010) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2009.10.006 · Cited by 816
Vojtěch, D., Kubásek, J., Šerák, J., & Novák, P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.05.008 · Cited by 708
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Yan, C., Hao, L., Hussein, A., Young, P., & Raymont, D. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.10.027 · Cited by 622
Biodegradable Metals for Cardiovascular Stent Application: Interests and New Opportunities
Moravej, M., & Mantovani, D. (2011) · International Journal of Molecular Sciences · doi:10.3390/ijms12074250 · Cited by 600
Venezuela, J., & Dargusch, M. S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.035 · Cited by 588
Peuster, M., Wohlsein, P., Brügmann, M., Ehlerding, M., Seidler, K., Fink, C., Brauer, H., Fischer, A., & Hausdorf, G. (2001) · Heart · doi:10.1136/heart.86.5.563 · Cited by 569
Long-term biocompatibility of a corrodible peripheral iron stent in the porcine descending aorta
Peuster, M., Hesse, C., Schloo, T., Fink, C., Beerbaum, P., & von Schnakenburg, C. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.05.029 · Cited by 558
Fundamental Theory of Biodegradable Metals—Definition, Criteria, and Design
Liu, Y., Zheng, Y., Chen, X., Yang, J., Pan, H., Chen, D., Wang, L., Zhang, J., Zhu, D., Wu, S., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805402 · Cited by 519
Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr
Li, H. F., Xie, X. H., Zheng, Y. F., Cong, Y., Zhou, F. Y., Qiu, K. J., Wang, X., Chen, S. H., Huang, L., Tian, L., et al. (2015) · Scientific Reports · doi:10.1038/srep10719 · Cited by 515
Wang, J., Witte, F., Xi, T., Zheng, Y., Yang, K., Yang, Y., Zhao, D., Meng, J., Li, Y., Li, W., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.04.011 · Cited by 493
Self-citationMostaed, E., Sikora-Jasinska, M., Mostaed, A., Loffredo, S., Demir, A. G., Previtali, B., Mantovani, D., Beanland, R., & Vedani, M. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.03.018 · Cited by 475
Advances in functionalized polymer coatings on biodegradable magnesium alloys–A review
Li, L.-Y., Cui, L.-Y., Zeng, R.-C., Li, S.-Q., Chen, X.-B., Zheng, Y., & Kannan, M. B. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.08.030 · Cited by 466
Additive Manufacturing of Biomaterials, Tissues, and Organs
Zadpoor, A. A., & Malda, J. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1719-y · Cited by 462
Self-citationMechanical performance of additively manufactured meta-biomaterials
Zadpoor, A. A. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.038 · Cited by 429
Self-citationLi, X., Liu, X., Wu, S., Yeung, K. W. K., Zheng, Y., & Chu, P. K. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.09.005 · Cited by 428
Song, B., Zhao, X., Li, S., Han, C., Wei, Q., Wen, S., Liu, J., & Shi, Y. (2015) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-015-0341-2 · Cited by 427
Additively manufactured porous tantalum implants
Wauthle, R., van der Stok, J., Amin Yavari, S., Van Humbeeck, J., Kruth, J.-P., Zadpoor, A. A., Weinans, H., Mulier, M., & Schrooten, J. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.003 · Cited by 417
Self-citationZinc-based biomaterials for regeneration and therapy
Su, Y., Cockerill, I., Wang, Y., Qin, Y.-X., Chang, L., Zheng, Y., & Zhu, D. (2019) · Trends in biotechnology · doi:10.1016/j.tibtech.2018.10.009 · Cited by 417
Loh, L.-E., Chua, C.-K., Yeong, W.-Y., Song, J., Mapar, M., Sing, S.-L., Liu, Z.-H., & Zhang, D.-Q. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.09.014 · Cited by 408
Xin, Y., Huo, K., Tao, H., Tang, G., & Chu, P. K. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.05.014 · Cited by 408
Ahmadi, S., Yavari, S., Wauthle, R., Pouran, B., Schrooten, J., Weinans, H., & Zadpoor, A. (2015) · Materials · doi:10.3390/ma8041871 · Cited by 399
Self-citationYang, H., Wang, C., Liu, C., Chen, H., Wu, Y., Han, J., Jia, Z., Lin, W., Zhang, D., Li, W., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.08.022 · Cited by 399
Liu, B., & Zheng, Y. F. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.11.001 · Cited by 396
Additively manufactured biodegradable porous magnesium
Li, Y., Zhou, J., Pavanram, P., Leeflang, M. A., Fockaert, L. I., Pouran, B., Tümer, N., Schröder, K.-U., Mol, J. M. C., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.008 · Cited by 396
Self-citationSimchi, A., & Pohl, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00341-1 · Cited by 377
Gomes, M. E., Sikavitsas, V. I., Behravesh, E., Reis, R. L., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10075 · Cited by 376
Rationally designed meta-implants: a combination of auxetic and conventional meta-biomaterials
Kolken, H. M. A., Janbaz, S., Leeflang, S. M. A., Lietaert, K., Weinans, H. H., & Zadpoor, A. A. (2018) · Materials Horizons · doi:10.1039/c7mh00699c · Cited by 374
Self-citationPotential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications
Tang, Z., Niu, J., Huang, H., Zhang, H., Pei, J., Ou, J., & Yuan, G. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.05.013 · Cited by 361
Kubásek, J., Vojtěch, D., Jablonská, E., Pospíšilová, I., Lipov, J., & Ruml, T. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.08.015 · Cited by 360
Zhao, D., Huang, S., Lu, F., Wang, B., Yang, L., Qin, L., Yang, K., Li, Y., Li, W., Wang, W., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.11.038 · Cited by 349
Self-citationThe Prospects of Zinc as a Structural Material for Biodegradable Implants—A Review Paper
Katarivas Levy, G., Goldman, J., & Aghion, E. (2017) · Metals · doi:10.3390/met7100402 · Cited by 340
Degradable metallic biomaterials: Design and development of Fe–Mn alloys for stents
Hermawan, H., Dube, D., & Mantovani, D. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32224 · Cited by 332
Li, G., Yang, H., Zheng, Y., Chen, X., Yang, J.-A., Zhu, D., Ruan, L., & Takashima, K. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.07.038 · Cited by 322
Stimulation of bone growth following zinc incorporation into biomaterials
Qiao, Y., Zhang, W., Tian, P., Meng, F., Zhu, H., Jiang, X., Liu, X., & Chu, P. K. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.04.101 · Cited by 318
Additive manufacturing of biodegradable metals: Current research status and future perspectives
Qin, Y., Wen, P., Guo, H., Xia, D., Zheng, Y., Jauer, L., Poprawe, R., Voshage, M., & Schleifenbaum, J. H. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.04.046 · Cited by 303
Porous magnesium-based scaffolds for tissue engineering
Yazdimamaghani, M., Razavi, M., Vashaee, D., Moharamzadeh, K., Boccaccini, A. R., & Tayebi, L. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.11.027 · Cited by 298
Bone regeneration performance of surface-treated porous titanium
Amin Yavari, S., van der Stok, J., Chai, Y. C., Wauthle, R., Tahmasebi Birgani, Z., Habibovic, P., Mulier, M., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.04.054 · Cited by 297
Self-citationMicro-alloying with Mn in Zn–Mg alloy for future biodegradable metals application
Liu, X., Sun, J., Zhou, F., Yang, Y., Chang, R., Qiu, K., Pu, Z., Li, L., & Zheng, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.128 · Cited by 292
Eid, R., Arab, N. T. T., & Greenwood, M. T. (2017) · Biochimica et Biophysica Acta (BBA) - Molecular Cell Research · doi:10.1016/j.bbamcr.2016.12.002 · Cited by 288
Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application
Niu, J., Tang, Z., Huang, H., Pei, J., Zhang, H., Yuan, G., & Ding, W. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.06.082 · Cited by 280
Endothelial Cellular Responses to Biodegradable Metal Zinc
Ma, J., Zhao, N., & Zhu, D. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00319 · Cited by 275
Metallic zinc exhibits optimal biocompatibility for bioabsorbable endovascular stents
Bowen, P. K., Guillory, R. J., Shearier, E. R., Seitz, J.-M., Drelich, J., Bocks, M., Zhao, F., & Goldman, J. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.07.022 · Cited by 261
Updates on the research and development of absorbable metals for biomedical applications
Hermawan, H. (2018) · Progress in Biomaterials · doi:10.1007/s40204-018-0091-4 · Cited by 260
Novel processing of iron–manganese alloy-based biomaterials by inkjet 3-D printing
Chou, D.-T., Wells, D., Hong, D., Lee, B., Kuhn, H., & Kumta, P. N. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.04.016 · Cited by 259
Zhao, S., Seitz, J.-M., Eifler, R., Maier, H. J., Guillory, R. J., Earley, E. J., Drelich, A., Goldman, J., & Drelich, J. W. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.02.167 · Cited by 251
Comparative in vitro Study on Pure Metals (Fe, Mn, Mg, Zn and W) as Biodegradable Metals
Cheng, J., Liu, B., Wu, Y. H., & Zheng, Y. F. (2013) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2013.03.019 · Cited by 249
Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys
Hong, D., Chou, D.-T., Velikokhatnyi, O. I., Roy, A., Lee, B., Swink, I., Issaev, I., Kuhn, H. A., & Kumta, P. N. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.08.032 · Cited by 234
Liu, X., Sun, J., Qiu, K., Yang, Y., Pu, Z., Li, L., & Zheng, Y. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.10.116 · Cited by 233
Limmahakhun, S., Oloyede, A., Sitthiseripratip, K., Xiao, Y., & Yan, C. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.11.090 · Cited by 229
Zhu, D., Su, Y., Young, M. L., Ma, J., Zheng, Y., & Tang, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06654 · Cited by 227
Porous Biodegradable Metals for Hard Tissue Scaffolds: A Review
Yusop, A. H., Bakir, A. A., Shaharom, N. A., Abdul Kadir, M. R., & Hermawan, H. (2012) · International Journal of Biomaterials · doi:10.1155/2012/641430 · Cited by 225
van Hengel, I. A. J., Riool, M., Fratila-Apachitei, L. E., Witte-Bouma, J., Farrell, E., Zadpoor, A. A., Zaat, S. A. J., & Apachitei, I. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.02.030 · Cited by 216
Self-citationAdditively manufactured porous metallic biomaterials
Zadpoor, A. A. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb00420c · Cited by 213
Self-citationAhmadi, S. M., Hedayati, R., Li, Y., Lietaert, K., Tümer, N., Fatemi, A., Rans, C. D., Pouran, B., Weinans, H., & Zadpoor, A. A. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.11.014 · Cited by 210
Self-citationIn Vitro Cytotoxicity, Adhesion, and Proliferation of Human Vascular Cells Exposed to Zinc
Shearier, E. R., Bowen, P. K., He, W., Drelich, A., Drelich, J., Goldman, J., & Zhao, F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00035 · Cited by 209
Mechanical Strength, Biodegradation, and in Vitro and in Vivo Biocompatibility of Zn Biomaterials
Zhu, D., Cockerill, I., Su, Y., Zhang, Z., Fu, J., Lee, K.-W., Ma, J., Okpokwasili, C., Tang, L., Zheng, Y., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b20634 · Cited by 202
Zhao, S., McNamara, C. T., Bowen, P. K., Verhun, N., Braykovich, J. P., Goldman, J., & Drelich, J. W. (2017) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3901-0 · Cited by 201
Bakhsheshi-Rad, H. R., Hamzah, E., Low, H. T., Kasiri-Asgarani, M., Farahany, S., Akbari, E., & Cho, M. H. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.11.138 · Cited by 198
A simplified in vivo approach for evaluating the bioabsorbable behavior of candidate stent materials
Pierson, D., Edick, J., Tauscher, A., Pokorney, E., Bowen, P., Gelbaugh, J., Stinson, J., Getty, H., Lee, C. H., Drelich, J., et al. (2012) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31922 · Cited by 195
Song, B., Dong, S., Liu, Q., Liao, H., & Coddet, C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.08.085 · Cited by 189
Long-term surveillance of zinc implant in murine artery: Surprisingly steady biocorrosion rate
Drelich, A. J., Zhao, S., Guillory, R. J., Drelich, J. W., & Goldman, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.05.045 · Cited by 188
Preparation and properties of high purity Mg–Y biomaterials
Peng, Q., Huang, Y., Zhou, L., Hort, N., & Kainer, K. U. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.065 · Cited by 187
Moravej, M., Purnama, A., Fiset, M., Couet, J., & Mantovani, D. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.01.008 · Cited by 184
Lin, W., Qin, L., Qi, H., Zhang, D., Zhang, G., Gao, R., Qiu, H., Xia, Y., Cao, P., Wang, X., et al. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.03.020 · Cited by 183
Wen, P., Voshage, M., Jauer, L., Chen, Y., Qin, Y., Poprawe, R., & Schleifenbaum, J. H. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.057 · Cited by 179
Chemical Preparation of Pure and Strontium‐ and/or Magnesium‐Doped Lanthanum Gallate Powders
Taş, A. C., Majewski, P. J., & Aldinger, F. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01666.x · Cited by 175
A combined strategy to enhance the properties of Zn by laser rapid solidification and laser alloying
Yang, Y., Yuan, F., Gao, C., Feng, P., Xue, L., He, S., & Shuai, C. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2018.03.018 · Cited by 168
Revival of pure titanium for dynamically loaded porous implants using additive manufacturing
Wauthle, R., Ahmadi, S. M., Amin Yavari, S., Mulier, M., Zadpoor, A. A., Weinans, H., Van Humbeeck, J., Kruth, J.-P., & Schrooten, J. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.05.001 · Cited by 163
Self-citationInitial formation of corrosion products on pure zinc in simulated body fluid
Liu, L., Meng, Y., Dong, C., Yan, Y. J., Volinsky, A. A., & Wang, L. (2018) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2018.05.005 · Cited by 156
Li, P., Schille, C., Schweizer, E., Rupp, F., Heiss, A., Legner, C., Klotz, U. E., Geis‐Gerstorfer, J., & Scheideler, L. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19030755 · Cited by 153
Shen, C., Liu, X., Fan, B., et al. (2016) · RSC Advances · doi:10.1039/c6ra14300h · Cited by 151
Wen, P., Qin, Y., Chen, Y., Voshage, M., Jauer, L., Poprawe, R., & Schleifenbaum, J. H. (2018) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2018.09.065 · Cited by 135
Degradation of zinc in saline solutions, plasma, and whole blood
Törne, K. B., Larsson, M., Norlin, A., & Weissenrieder, J. (2015) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33458 · Cited by 134
3D Printed Fe Scaffolds with HA Nanocoating for Bone Regeneration
Yang, C., Huan, Z., Wang, X., Wu, C., & Chang, J. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00885 · Cited by 133
Ahmadi, S. M., Kumar, R., Borisov, E. V., Petrov, R., Leeflang, M. A., Li, Y., Tümer, N., Huizenga, R. M., Ayas, C., ZADPOOR, A. A., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.10.043 · Cited by 132
Self-citationShuai, C., Cheng, Y. J., Yang, Y., Peng, S., Yang, W., & Qi, F. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.05.278 · Cited by 132
Huang, T., Cheng, J., & Zheng, Y. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.10.023 · Cited by 129
Influences of albumin on in vitro corrosion of pure Zn in artificial plasma
Liu, L., Meng, Y., Volinsky, A. A., Zhang, H., & Wang, L. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.04.003 · Cited by 129
Wang, J., Wu, Y., Li, H., Liu, Y., Bai, X., Chau, K. W., Zheng, Y., & Qin, L. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.12.007 · Cited by 124
Bian, D., Zhou, W., Deng, J., Liu, Y., Li, W., Chu, X., Xiu, P., Cai, H., Kou, Y., Jiang, B., et al. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.10.004 · Cited by 123
Hedayati, R., Ahmadi, S. M., Lietaert, K., et al. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.12.029 · Cited by 109
Self-citationIn vivo performances of pure Zn and Zn–Fe alloy as biodegradable implants
Kafri, A., Ovadia, S., Yosafovich-Doitch, G., & Aghion, E. (2018) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-018-6096-7 · Cited by 107
Yazdimamaghani, M., Razavi, M., Vashaee, D., & Tayebi, L. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.01.041 · Cited by 104
Biodegradation-affected fatigue behavior of additively manufactured porous magnesium
Li, Y., Jahr, H., Zhang, X., Leeflang, M. A., Li, W., Pouran, B., Tichelaar, F. D., Weinans, H., Zhou, J., & ZADPOOR, A. A. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.013 · Cited by 99
Self-citationYusop, A. H. M., Daud, N. M., Nur, H., Kadir, M. R. A., & Hermawan, H. (2015) · Scientific Reports · doi:10.1038/srep11194 · Cited by 97
Comparative Studies on Degradation Behavior of Pure Zinc in Various Simulated Body Fluids
Liu, X., Yang, H., Liu, Y., Xiong, P., Guo, H., Huang, H., & Zheng, Y. (2019) · JOM · doi:10.1007/s11837-019-03357-3 · Cited by 96
Mechanics of additively manufactured biomaterials
ZADPOOR, A. A. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.03.018 · Cited by 94
Self-citationStrontium and bisphosphonate coated iron foam scaffolds for osteoporotic fracture defect healing
Ray, S., Thormann, U., Eichelroth, M., Budak, M., Biehl, C., Rupp, M., Sommer, U., Khassawna, T. E., Alagboso, F. I., Kampschulte, M., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.049 · Cited by 90
Investigation of anodic aluminium oxide layers by electrochemical impedance spectroscopy
der Linden, B. V., Terryn, H. A., & Vereecken, J. (1990) · Journal of Applied Electrochemistry · doi:10.1007/bf01094309 · Cited by 88
Yu, J., Xu, L., Li, K., Xie, N., Xi, Y., Wang, Y., Zheng, X., Chen, X., Wang, M., & Ye, X. (2017) · Scientific Reports · doi:10.1038/s41598-017-03661-5 · Cited by 87
Yazdimamaghani, M., Razavi, M., Vashaee, D., Pothineni, V. R., Rajadas, J., & Tayebi, L. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.02.120 · Cited by 84
Enhanced Autophagy from Chronic Toxicity of Iron and Mutant A53T α-Synuclein
Chew, K. C. M., Ang, E., Tai, Y. K., Tsang, F., Lo, S. Q., Ong, E., Ong, W.-Y., Shen, H., Lim, K., Dawson, V. L., et al. (2011) · Journal of Biological Chemistry · doi:10.1074/jbc.m111.268409 · Cited by 84
Corrosion fatigue behavior of additively manufactured biodegradable porous iron
Li, Y., Lietaert, K., Li, W., Zhang, X.-Y., Leeflang, M. A., Zhou, J., & ZADPOOR, A. A. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.05.003 · Cited by 84
Self-citationIskandar, M. E., Aslani, A., & Liu, H. H. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34530 · Cited by 83
Vetsch, J. R., Betts, D. C. T. N., Müller, R., & Hofmann, S. (2017) · PLoS ONE · doi:10.1371/journal.pone.0180781 · Cited by 79
Čapek, J., Msallamová, Š., Jablonská, E., Lipov, J., & Vojtěch, D. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.05.100 · Cited by 69
Daud, N. M., Sing, N. B., Yusop, A. H. M., Majid, F. A. A., & Hermawan, H. (2014) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2014.07.001 · Cited by 62
Carluccio, D., Demir, A. G., Caprio, L., Previtali, B., Bermingham, M. J., & Dargusch, M. S. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.03.018 · Cited by 60
In Vitro Degradation of Absorbable Zinc Alloys in Artificial Urine
Champagne, S., Mostaed, E., Safizadeh, F., GHALI, E. L., Vedani, M., & Hermawan, H. (2019) · Materials · doi:10.3390/ma12020295 · Cited by 49
Alavi, R., Trenggono, A., Champagne, S., & Hermawan, H. (2017) · Metals · doi:10.3390/met7060202 · Cited by 44
ZADPOOR, A. A. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19092684 · Cited by 42
Self-citationFarack, J., Wolf‐Brandstetter, C., Glorius, S., Nies, B. A., Standke, G., Quadbeck, P., Worch, H., & Scharnweber, D. (2011) · Materials Science and Engineering B · doi:10.1016/j.mseb.2011.06.004 · Cited by 37
Cited by
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.020 · Cited by 1,371
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Yuan, L., Ding, S., & Wen, C. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.12.003 · Cited by 593
Fundamental Theory of Biodegradable Metals—Definition, Criteria, and Design
Liu, Y., Zheng, Y., Chen, X., Yang, J., Pan, H., Chen, D., Wang, L., Zhang, J., Zhu, D., Wu, S., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805402 · Cited by 519
Zhang, L.-C., Chen, L.-Y., & Wang, L. (2020) · Advanced Engineering Materials · doi:10.1002/adem.201901258 · Cited by 456
Metadata
- Authors
- Li, Y., Jahr, H., Lietaert, K., Pavanram, P., Yilmaz, A., Fockaert, L. I., Leeflang, M. A., Pouran, B., Gonzalez-Garcia, Y., Weinans, H., Mol, J. M. C., Zhou, J., & Zadpoor, A. A.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 77
- Pages
- 380-393
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2855594966
- Cited by
- 299
- References
- 122
- FWCI
- 8.64
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.