The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Synthetic bone: Design by additive manufacturing
Open accessAbstract
A broad range of synthetic trabecular-like metallic lattices are 3D printed, to study the extra design freedom conferred by this new manufacturing process. The aim is to propose new conceptual types of implant structures for superior bio-mechanical matching and osseo-integration: synthetic bone. The target designs are 3D printed in Ti-6Al-4V alloy using a laser-bed process. Systematic evaluation is then carried out: (i) their accuracy is characterised at high spatial resolution using computed X-ray tomography, to assess manufacturing robustness with respect to the original geometrical design intent and (ii) the mechanical properties - stiffness and strength - are experimentally measured, evaluated, and compared. Finally, this new knowledge is synthesised in a conceptual framework to allow the construction of so-called implant design maps, to define the processing conditions of bone tailored substitutes, with focus on spine fusion devices. The design criteria emphasise the bone stiffness-matching, preferred range of pore structure for bone in-growth, manufacturability of the device and choice of inherent materials properties which are needed for durable implants. Examples of the use of such maps are given with focus on spine fusion devices, emphasising the stiffness-matching, osseo-integration properties and choice of inherent materials properties which are needed for durable implants. STATEMENT OF SIGNIFICANCE: We present a conceptual bio-engineering design methodology for new biomedical lattices produced by additive manufacturing, which addresses some of the critical points in currently existing porous implant materials. Amongst others: (i) feasibility and accuracy of manufacturing, (ii) design to the elastic properties of bone, and (iii) sensible pores sizes for osseointegration. This has inspired new and novel geometrical latticed designs which aim at improving the properties of intervertebral fusion devices. In their fundamental form, these structures are here fabricated and tested. When integrated into medical devices, these concepts could offer superior medical outcomes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Chen, Q., & Thouas, G. A. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.10.001 · Cited by 2,398
Mechanical properties of biomedical titanium alloys
Niinomi, M. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00806-x · Cited by 2,157
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Recent metallic materials for biomedical applications
Niinomi, M. (2002) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-002-0109-2 · Cited by 1,508
Young's modulus of trabecular and cortical bone material: Ultrasonic and microtensile measurements
Rho, J. Y., Ashman, R. B., & Turner, C. H. (1993) · Journal of Biomechanics · doi:10.1016/0021-9290(93)90042-d · Cited by 1,283
Trabecular bone modulus–density relationships depend on anatomic site
Morgan, E. F., Bayraktar, H. H., & Keaveny, T. M. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00071-x · Cited by 1,209
The mechanical properties of cellular solids
Ashby, M. F., & Medalist, R. F. M. (1983) · Metallurgical Transactions A · doi:10.1007/bf02645546 · Cited by 1,137
New Developments of Ti-Based Alloys for Biomedical Applications
Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014) · Materials · doi:10.3390/ma7031709 · Cited by 1,048
Taniguchi, N., Fujibayashi, S., Takemoto, M., Sasaki, K., Otsuki, B., Nakamura, T., Matsushita, T., Kokubo, T., & Matsuda, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.10.069 · Cited by 960
Al-Ketan, O., Rowshan, R., & Abu Al-Rub, R. K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.006 · Cited by 941
Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation
Rho, J.-Y., Tsui, T. Y., & Pharr, G. M. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)00073-2 · Cited by 924
Bobbert, F. S. L., Lietaert, K., Eftekhari, A. A., Pouran, B., Ahmadi, S. M., Weinans, H., & Zadpoor, A. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.024 · Cited by 873
Van Bael, S., Chai, Y. C., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., Kruth, J.-P., & Schrooten, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.001 · Cited by 766
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Pore Size of Porous Hydroxyapatite as the Cell-Substratum Controls BMP-Induced Osteogenesis
Tsuruga, E., Takita, H., Itoh, H., Wakisaka, Y., & Kuboki, Y. (1997) · Journal of Biochemistry · doi:10.1093/oxfordjournals.jbchem.a021589 · Cited by 706
A new look at biomedical Ti-based shape memory alloys
Biesiekierski, A., Wang, J., Gepreel, M. A.-H., & Wen, C. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.01.018 · Cited by 688
Handbook of Biomaterial Properties
(1998) · Springer eBooks · doi:10.1007/978-1-4615-5801-9 · Cited by 639
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Bone mechanical properties and changes with osteoporosis
Osterhoff, G., Morgan, E. F., Shefelbine, S. J., Karim, L., McNamara, L. M., & Augat, P. (2016) · Injury · doi:10.1016/s0020-1383(16)47003-8 · Cited by 557
Biomechanics and Mechanobiology of Trabecular Bone: A Review
Oftadeh, R., Perez-Viloria, M., Villa-Camacho, J. C., Vaziri, A., & Nazarian, A. (2015) · Journal of Biomechanical Engineering · doi:10.1115/1.4029176 · Cited by 547
Nano-scale modification of titanium implant surfaces to enhance osseointegration
Souza, J. C. M., Sordi, M. B., Kanazawa, M., Ravindran, S., Henriques, B., Silva, F. S., Aparicio, C., & Cooper, L. F. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.045 · Cited by 544
Bone tissue regeneration: the role of scaffold geometry
Zadpoor, A. A. (2015) · Biomaterials Science · doi:10.1039/c4bm00291a · Cited by 518
Tan, X. P., Tan, Y. J., Chow, C. S. L., Tor, S. B., & Yeong, W. Y. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.02.094 · Cited by 514
Metallic Scaffolds for Bone Regeneration
Alvarez, K., & Nakajima, H. (2009) · Materials · doi:10.3390/ma2030790 · Cited by 505
Vascularized 3D printed scaffolds for promoting bone regeneration
Yan, Y., Chen, H., Zhang, H., Guo, C., Yang, K., Chen, K., Cheng, R., Qian, N., Sandler, N., Zhang, Y. S., et al. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.10.033 · Cited by 475
Van Bael, S., Kerckhofs, G., Moesen, M., Pyka, G., Schrooten, J., & Kruth, J. P. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.06.045 · Cited by 452
Kuboki, Y., Jin, Q., & Takita, H. (2001) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200100002-00005 · Cited by 433
Bone physiology as inspiration for tissue regenerative therapies
Lopes, D., Martins-Cruz, C., Oliveira, M. B., & Mano, J. F. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.09.028 · Cited by 421
Liu, F., Mao, Z., Zhang, P., Zhang, D. Z., Jiang, J., & Ma, Z. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.053 · Cited by 395
Bone ingrowth in porous titanium implants produced by 3D fiber deposition
Li, J. P., Habibovic, P., van den Doel, M., Wilson, C. E., de Wijn, J. R., van Blitterswijk, C. A., & de Groot, K. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.02.020 · Cited by 393
Osseointegration and current interpretations of the bone-implant interface
Shah, F. A., Thomsen, P., & Palmquist, A. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.018 · Cited by 381
The role of cortical bone and its microstructure in bone strength
Augat, P., & Schorlemmer, S. (2006) · Age and Ageing · doi:10.1093/ageing/afl081 · Cited by 377
Kadkhodapour, J., Montazerian, H., Darabi, A., Anaraki, A. P., Ahmadi, S. M., ZADPOOR, A. A., & Schmauder, S. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.06.012 · Cited by 376
Design of lattice structures with controlled anisotropy
Xu, S., Shen, J., Zhou, S., Huang, X., & Xie, Y. M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.007 · Cited by 351
Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting
Fukuda, A., Takemoto, M., Saito, T., Fujibayashi, S., Neo, M., Pattanayak, D. K., Matsushita, T., Sasaki, K., Nishida, N., Kokubo, T., et al. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.01.037 · Cited by 349
Cheng, X. Y., Li, S. J., Murr, L. E., Zhang, Z. B., Hao, Y. L., Yang, R., Medina, F., & Wicker, R. B. (2012) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.10.005 · Cited by 329
Warnke, P. H., Douglas, T., Wollny, P., Sherry, E., Steiner, M., Galonska, S., Becker, S. T., Springer, I. N., Wiltfang, J., & Sivananthan, S. (2009) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2008.0288 · Cited by 305
Bobbert, F. S. L., & Zadpoor, A. A. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb00741h · Cited by 296
Zhang, X.-Y., Fang, G., Leeflang, S., Zadpoor, A. A., & Zhou, J. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.013 · Cited by 277
Direct mechanics assessment of elastic symmetries and properties of trabecular bone architecture
van Rietbergen, B., Odgaard, A., Kabel, J., & Huiskes, R. (1996) · Journal of Biomechanics · doi:10.1016/0021-9290(96)00093-0 · Cited by 263
Melancon, D., Bagheri, Z. S., Johnston, R. B., Liu, L., Tanzer, M., & Pasini, D. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.09.013 · Cited by 241
Effect of surface finish on the osseointegration of laser-treated titanium alloy implants
Götz, H. E., Müller, M., Emmel, A., Holzwarth, U., Erben, R. G., & Stangl, R. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.11.002 · Cited by 240
Wang, D., Yang, Y., Liu, R., Xiao, D., & Sun, J. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.05.001 · Cited by 229
Impact of pore size on the vascularization and osseointegration of ceramic bone substitutes in vivo
Klenke, F. M., Liu, Y., Yuan, H., Hunziker, E. B., Siebenrock, K. A., & Hofstetter, W. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31559 · Cited by 227
Handbook of Biomaterial Properties
(2016) · Springer eBooks · doi:10.1007/978-1-4939-3305-1 · Cited by 224
Zhang, X.-Y., Fang, G., & Zhou, J. (2017) · Materials · doi:10.3390/ma10010050 · Cited by 222
Design of metallic bone by additive manufacturing
Alabort, E., Barba, D., & Reed, R. C. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.01.022 · Cited by 210
Self-citationManagement of Posttraumatic Segmental Bone Defects
DeCoster, T. A., Gehlert, R. J., Mikola, E. A., & Pirela-Cruz, M. A. (2004) · Journal of the American Academy of Orthopaedic Surgeons · doi:10.5435/00124635-200401000-00005 · Cited by 205
Mechanical Properties of Dried Defatted Spongy Bone
Lindahl, O. (1976) · Acta Orthopaedica Scandinavica · doi:10.3109/17453677608998966 · Cited by 194
Wu, S., Li, Y., Zhang, Y., Li, X., Yuan, C., Hao, Y., Zhang, Z., & Guo, Z. (2013) · Artificial Organs · doi:10.1111/aor.12153 · Cited by 181
A strontium-incorporated nanoporous titanium implant surface for rapid osseointegration
Zhang, W., Cao, H., Zhang, X., Li, G., Chang, Q., Zhao, J., Qiao, Y., Ding, X., Yang, G., Liu, X., et al. (2016) · Nanoscale · doi:10.1039/c5nr08580b · Cited by 153
Reznikov, N., Boughton, O. R., Ghouse, S., Weston, A., Collinson, L., Blunn, G. W., Jeffers, J. R. T., Cobb, J. P., & Stevens, M. M. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.11.026 · Cited by 97
Alrabeah, G. O., Brett, P., Knowles, J. C., & Petridis, H. (2017) · Journal of Dentistry · doi:10.1016/j.jdent.2017.08.002 · Cited by 85
Yook, S.-W., Kim, H., & Koh, Y. (2009) · Materials Letters · doi:10.1016/j.matlet.2009.03.056 · Cited by 70
Torres-Sánchez, C., McLaughlin, J., & Fotticchia, A. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.10.026 · Cited by 41
Marinozzi, F., Marinozzi, A., Bini, F., Zuppante, F., Pecci, R., & Bedini, R. (2012) · PubMed · doi:10.4415/ann_12_01_04 · Cited by 29
Acoustic emission and mechanical properties of trabecular bone
Wells, J. G., & Rawlings, R. D. (1985) · Biomaterials · doi:10.1016/0142-9612(85)90016-x · Cited by 26
Comparative analysis of osseointegration in various types of acetabular implant materials
Bondarenko, S., Dedukh, N. V., Filipenko, V., Akonjom, M., Badnaoui, A. A., & Schwarzkopf, R. M. (2018) · Hip International · doi:10.1177/1120700018759314 · Cited by 24
Elastic Anisotropy of Trabecular Bone in the Elderly Human Vertebra
Unnikrishnan, G. U., Gallagher, J. A., Hussein, A. I., Barest, G. D., & Morgan, E. F. (2015) · Journal of Biomechanical Engineering · doi:10.1115/1.4031415 · Cited by 13
Cited by
Feng, J., Fu, J., Yao, X., & He, Y. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac5be6 · Cited by 813
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Inverse-designed spinodoid metamaterials
Kumar, S., Tan, S., Zheng, L., & Kochmann, D. M. (2020) · npj Computational Materials · doi:10.1038/s41524-020-0341-6 · Cited by 444
Metal 3D printing as a disruptive technology for superalloys
Panwisawas, C., Tang, Y. T., & Reed, R. C. (2020) · Nature Communications · doi:10.1038/s41467-020-16188-7 · Cited by 354
Self-citationCeramic Materials for Biomedical Applications: An Overview on Properties and Fabrication Processes
Vaiani, L., Boccaccio, A., Uva, A. E., Palumbo, G., Piccininni, A., Guglielmi, P., Cantore, S., Santacroce, L., Charitos, I. A., & Ballini, A. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14030146 · Cited by 271
Metadata
- Authors
- Barba, D., Alabort, E., & Reed, R. C.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 97
- Pages
- 637-656
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2964473292
- Cited by
- 316
- References
- 60
- FWCI
- 13.96
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.